diff options
Diffstat (limited to 'gcc-4.4.0/gcc/config/m68hc11/m68hc11.c')
| -rw-r--r-- | gcc-4.4.0/gcc/config/m68hc11/m68hc11.c | 5499 |
1 files changed, 5499 insertions, 0 deletions
diff --git a/gcc-4.4.0/gcc/config/m68hc11/m68hc11.c b/gcc-4.4.0/gcc/config/m68hc11/m68hc11.c new file mode 100644 index 000000000..4fba4a39a --- /dev/null +++ b/gcc-4.4.0/gcc/config/m68hc11/m68hc11.c @@ -0,0 +1,5499 @@ +/* Subroutines for code generation on Motorola 68HC11 and 68HC12. + Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 + Free Software Foundation, Inc. + Contributed by Stephane Carrez (stcarrez@nerim.fr) + +This file is part of GCC. + +GCC is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 3, or (at your option) +any later version. + +GCC is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with GCC; see the file COPYING3. If not see +<http://www.gnu.org/licenses/>. + +Note: + A first 68HC11 port was made by Otto Lind (otto@coactive.com) + on gcc 2.6.3. I have used it as a starting point for this port. + However, this new port is a complete re-write. Its internal + design is completely different. The generated code is not + compatible with the gcc 2.6.3 port. + + The gcc 2.6.3 port is available at: + + ftp.unina.it/pub/electronics/motorola/68hc11/gcc/gcc-6811-fsf.tar.gz + +*/ + +#include <stdio.h> +#include "config.h" +#include "system.h" +#include "coretypes.h" +#include "tm.h" +#include "rtl.h" +#include "tree.h" +#include "tm_p.h" +#include "regs.h" +#include "hard-reg-set.h" +#include "real.h" +#include "insn-config.h" +#include "conditions.h" +#include "output.h" +#include "insn-attr.h" +#include "flags.h" +#include "recog.h" +#include "expr.h" +#include "libfuncs.h" +#include "toplev.h" +#include "basic-block.h" +#include "function.h" +#include "ggc.h" +#include "reload.h" +#include "target.h" +#include "target-def.h" +#include "df.h" + +static void emit_move_after_reload (rtx, rtx, rtx); +static rtx simplify_logical (enum machine_mode, int, rtx, rtx *); +static void m68hc11_emit_logical (enum machine_mode, int, rtx *); +static void m68hc11_reorg (void); +static int go_if_legitimate_address_internal (rtx, enum machine_mode, int); +static rtx m68hc11_expand_compare (enum rtx_code, rtx, rtx); +static int must_parenthesize (rtx); +static int m68hc11_address_cost (rtx, bool); +static int m68hc11_shift_cost (enum machine_mode, rtx, int); +static int m68hc11_rtx_costs_1 (rtx, enum rtx_code, enum rtx_code); +static bool m68hc11_rtx_costs (rtx, int, int, int *, bool); +static tree m68hc11_handle_fntype_attribute (tree *, tree, tree, int, bool *); +const struct attribute_spec m68hc11_attribute_table[]; + +void create_regs_rtx (void); + +static void asm_print_register (FILE *, int); +static void m68hc11_output_function_epilogue (FILE *, HOST_WIDE_INT); +static void m68hc11_asm_out_constructor (rtx, int); +static void m68hc11_asm_out_destructor (rtx, int); +static void m68hc11_file_start (void); +static void m68hc11_encode_section_info (tree, rtx, int); +static const char *m68hc11_strip_name_encoding (const char* str); +static unsigned int m68hc11_section_type_flags (tree, const char*, int); +static int autoinc_mode (rtx); +static int m68hc11_make_autoinc_notes (rtx *, void *); +static void m68hc11_init_libfuncs (void); +static rtx m68hc11_struct_value_rtx (tree, int); +static bool m68hc11_return_in_memory (const_tree, const_tree); + +/* Must be set to 1 to produce debug messages. */ +int debug_m6811 = 0; + +extern FILE *asm_out_file; + +rtx ix_reg; +rtx iy_reg; +rtx d_reg; +rtx m68hc11_soft_tmp_reg; +static GTY(()) rtx stack_push_word; +static GTY(()) rtx stack_pop_word; +static GTY(()) rtx z_reg; +static GTY(()) rtx z_reg_qi; +static int regs_inited = 0; + +/* Set to 1 by expand_prologue() when the function is an interrupt handler. */ +int current_function_interrupt; + +/* Set to 1 by expand_prologue() when the function is a trap handler. */ +int current_function_trap; + +/* Set to 1 when the current function is placed in 68HC12 banked + memory and must return with rtc. */ +int current_function_far; + +/* Min offset that is valid for the indirect addressing mode. */ +HOST_WIDE_INT m68hc11_min_offset = 0; + +/* Max offset that is valid for the indirect addressing mode. */ +HOST_WIDE_INT m68hc11_max_offset = 256; + +/* The class value for base registers. */ +enum reg_class m68hc11_base_reg_class = A_REGS; + +/* The class value for index registers. This is NO_REGS for 68HC11. */ +enum reg_class m68hc11_index_reg_class = NO_REGS; + +enum reg_class m68hc11_tmp_regs_class = NO_REGS; + +/* Tables that tell whether a given hard register is valid for + a base or an index register. It is filled at init time depending + on the target processor. */ +unsigned char m68hc11_reg_valid_for_base[FIRST_PSEUDO_REGISTER]; +unsigned char m68hc11_reg_valid_for_index[FIRST_PSEUDO_REGISTER]; + +/* A correction offset which is applied to the stack pointer. + This is 1 for 68HC11 and 0 for 68HC12. */ +int m68hc11_sp_correction; + +int m68hc11_addr_mode; +int m68hc11_mov_addr_mode; + +/* Comparison operands saved by the "tstxx" and "cmpxx" expand patterns. */ +rtx m68hc11_compare_op0; +rtx m68hc11_compare_op1; + + +const struct processor_costs *m68hc11_cost; + +/* Costs for a 68HC11. */ +static const struct processor_costs m6811_cost = { + /* add */ + COSTS_N_INSNS (2), + /* logical */ + COSTS_N_INSNS (2), + /* non-constant shift */ + COSTS_N_INSNS (20), + /* shiftQI const */ + { COSTS_N_INSNS (0), COSTS_N_INSNS (1), COSTS_N_INSNS (2), + COSTS_N_INSNS (3), COSTS_N_INSNS (4), COSTS_N_INSNS (3), + COSTS_N_INSNS (2), COSTS_N_INSNS (1) }, + + /* shiftHI const */ + { COSTS_N_INSNS (0), COSTS_N_INSNS (1), COSTS_N_INSNS (4), + COSTS_N_INSNS (6), COSTS_N_INSNS (8), COSTS_N_INSNS (6), + COSTS_N_INSNS (4), COSTS_N_INSNS (2), + COSTS_N_INSNS (2), COSTS_N_INSNS (4), + COSTS_N_INSNS (6), COSTS_N_INSNS (8), COSTS_N_INSNS (10), + COSTS_N_INSNS (8), COSTS_N_INSNS (6), COSTS_N_INSNS (4) + }, + /* mulQI */ + COSTS_N_INSNS (20), + /* mulHI */ + COSTS_N_INSNS (20 * 4), + /* mulSI */ + COSTS_N_INSNS (20 * 16), + /* divQI */ + COSTS_N_INSNS (20), + /* divHI */ + COSTS_N_INSNS (80), + /* divSI */ + COSTS_N_INSNS (100) +}; + +/* Costs for a 68HC12. */ +static const struct processor_costs m6812_cost = { + /* add */ + COSTS_N_INSNS (2), + /* logical */ + COSTS_N_INSNS (2), + /* non-constant shift */ + COSTS_N_INSNS (20), + /* shiftQI const */ + { COSTS_N_INSNS (0), COSTS_N_INSNS (1), COSTS_N_INSNS (2), + COSTS_N_INSNS (3), COSTS_N_INSNS (4), COSTS_N_INSNS (3), + COSTS_N_INSNS (2), COSTS_N_INSNS (1) }, + + /* shiftHI const */ + { COSTS_N_INSNS (0), COSTS_N_INSNS (1), COSTS_N_INSNS (4), + COSTS_N_INSNS (6), COSTS_N_INSNS (8), COSTS_N_INSNS (6), + COSTS_N_INSNS (4), COSTS_N_INSNS (2), + COSTS_N_INSNS (2), COSTS_N_INSNS (4), COSTS_N_INSNS (6), + COSTS_N_INSNS (8), COSTS_N_INSNS (10), COSTS_N_INSNS (8), + COSTS_N_INSNS (6), COSTS_N_INSNS (4) + }, + /* mulQI */ + COSTS_N_INSNS (3), + /* mulHI */ + COSTS_N_INSNS (3), + /* mulSI */ + COSTS_N_INSNS (3 * 4), + /* divQI */ + COSTS_N_INSNS (12), + /* divHI */ + COSTS_N_INSNS (12), + /* divSI */ + COSTS_N_INSNS (100) +}; + +/* Initialize the GCC target structure. */ +#undef TARGET_ATTRIBUTE_TABLE +#define TARGET_ATTRIBUTE_TABLE m68hc11_attribute_table + +#undef TARGET_ASM_ALIGNED_HI_OP +#define TARGET_ASM_ALIGNED_HI_OP "\t.word\t" + +#undef TARGET_ASM_FUNCTION_EPILOGUE +#define TARGET_ASM_FUNCTION_EPILOGUE m68hc11_output_function_epilogue + +#undef TARGET_ASM_FILE_START +#define TARGET_ASM_FILE_START m68hc11_file_start +#undef TARGET_ASM_FILE_START_FILE_DIRECTIVE +#define TARGET_ASM_FILE_START_FILE_DIRECTIVE true + +#undef TARGET_DEFAULT_TARGET_FLAGS +#define TARGET_DEFAULT_TARGET_FLAGS TARGET_DEFAULT + +#undef TARGET_ENCODE_SECTION_INFO +#define TARGET_ENCODE_SECTION_INFO m68hc11_encode_section_info + +#undef TARGET_SECTION_TYPE_FLAGS +#define TARGET_SECTION_TYPE_FLAGS m68hc11_section_type_flags + +#undef TARGET_RTX_COSTS +#define TARGET_RTX_COSTS m68hc11_rtx_costs +#undef TARGET_ADDRESS_COST +#define TARGET_ADDRESS_COST m68hc11_address_cost + +#undef TARGET_MACHINE_DEPENDENT_REORG +#define TARGET_MACHINE_DEPENDENT_REORG m68hc11_reorg + +#undef TARGET_INIT_LIBFUNCS +#define TARGET_INIT_LIBFUNCS m68hc11_init_libfuncs + +#undef TARGET_STRUCT_VALUE_RTX +#define TARGET_STRUCT_VALUE_RTX m68hc11_struct_value_rtx +#undef TARGET_RETURN_IN_MEMORY +#define TARGET_RETURN_IN_MEMORY m68hc11_return_in_memory +#undef TARGET_CALLEE_COPIES +#define TARGET_CALLEE_COPIES hook_callee_copies_named + +#undef TARGET_STRIP_NAME_ENCODING +#define TARGET_STRIP_NAME_ENCODING m68hc11_strip_name_encoding + +struct gcc_target targetm = TARGET_INITIALIZER; + +int +m68hc11_override_options (void) +{ + memset (m68hc11_reg_valid_for_index, 0, + sizeof (m68hc11_reg_valid_for_index)); + memset (m68hc11_reg_valid_for_base, 0, sizeof (m68hc11_reg_valid_for_base)); + + /* Compilation with -fpic generates a wrong code. */ + if (flag_pic) + { + warning (0, "-f%s ignored for 68HC11/68HC12 (not supported)", + (flag_pic > 1) ? "PIC" : "pic"); + flag_pic = 0; + } + + /* Do not enable -fweb because it breaks the 32-bit shift patterns + by breaking the match_dup of those patterns. The shift patterns + will no longer be recognized after that. */ + flag_web = 0; + + /* Configure for a 68hc11 processor. */ + if (TARGET_M6811) + { + target_flags &= ~(TARGET_AUTO_INC_DEC | TARGET_MIN_MAX); + m68hc11_cost = &m6811_cost; + m68hc11_min_offset = 0; + m68hc11_max_offset = 256; + m68hc11_index_reg_class = NO_REGS; + m68hc11_base_reg_class = A_REGS; + m68hc11_reg_valid_for_base[HARD_X_REGNUM] = 1; + m68hc11_reg_valid_for_base[HARD_Y_REGNUM] = 1; + m68hc11_reg_valid_for_base[HARD_Z_REGNUM] = 1; + m68hc11_sp_correction = 1; + m68hc11_tmp_regs_class = D_REGS; + m68hc11_addr_mode = ADDR_OFFSET; + m68hc11_mov_addr_mode = 0; + if (m68hc11_soft_reg_count < 0) + m68hc11_soft_reg_count = 4; + } + + /* Configure for a 68hc12 processor. */ + if (TARGET_M6812) + { + m68hc11_cost = &m6812_cost; + m68hc11_min_offset = -65536; + m68hc11_max_offset = 65536; + m68hc11_index_reg_class = D_REGS; + m68hc11_base_reg_class = A_OR_SP_REGS; + m68hc11_reg_valid_for_base[HARD_X_REGNUM] = 1; + m68hc11_reg_valid_for_base[HARD_Y_REGNUM] = 1; + m68hc11_reg_valid_for_base[HARD_Z_REGNUM] = 1; + m68hc11_reg_valid_for_base[HARD_SP_REGNUM] = 1; + m68hc11_reg_valid_for_index[HARD_D_REGNUM] = 1; + m68hc11_sp_correction = 0; + m68hc11_tmp_regs_class = TMP_REGS; + m68hc11_addr_mode = ADDR_INDIRECT | ADDR_OFFSET | ADDR_CONST + | (TARGET_AUTO_INC_DEC ? ADDR_INCDEC : 0); + m68hc11_mov_addr_mode = ADDR_OFFSET | ADDR_CONST + | (TARGET_AUTO_INC_DEC ? ADDR_INCDEC : 0); + target_flags |= MASK_NO_DIRECT_MODE; + if (m68hc11_soft_reg_count < 0) + m68hc11_soft_reg_count = 0; + + if (TARGET_LONG_CALLS) + current_function_far = 1; + } + return 0; +} + + +void +m68hc11_conditional_register_usage (void) +{ + int i; + + if (m68hc11_soft_reg_count > SOFT_REG_LAST - SOFT_REG_FIRST) + m68hc11_soft_reg_count = SOFT_REG_LAST - SOFT_REG_FIRST; + + for (i = SOFT_REG_FIRST + m68hc11_soft_reg_count; i < SOFT_REG_LAST; i++) + { + fixed_regs[i] = 1; + call_used_regs[i] = 1; + } + + /* For 68HC12, the Z register emulation is not necessary when the + frame pointer is not used. The frame pointer is eliminated and + replaced by the stack register (which is a BASE_REG_CLASS). */ + if (TARGET_M6812 && flag_omit_frame_pointer && optimize) + { + fixed_regs[HARD_Z_REGNUM] = 1; + } +} + + +/* Reload and register operations. */ + + +void +create_regs_rtx (void) +{ + /* regs_inited = 1; */ + ix_reg = gen_rtx_REG (HImode, HARD_X_REGNUM); + iy_reg = gen_rtx_REG (HImode, HARD_Y_REGNUM); + d_reg = gen_rtx_REG (HImode, HARD_D_REGNUM); + m68hc11_soft_tmp_reg = gen_rtx_REG (HImode, SOFT_TMP_REGNUM); + + stack_push_word = gen_rtx_MEM (HImode, + gen_rtx_PRE_DEC (HImode, + gen_rtx_REG (HImode, HARD_SP_REGNUM))); + stack_pop_word = gen_rtx_MEM (HImode, + gen_rtx_POST_INC (HImode, + gen_rtx_REG (HImode, HARD_SP_REGNUM))); + +} + +/* Value is 1 if hard register REGNO can hold a value of machine-mode MODE. + - 8-bit values are stored anywhere (except the SP register). + - 16-bit values can be stored in any register whose mode is 16 + - 32-bit values can be stored in D, X registers or in a soft register + (except the last one because we need 2 soft registers) + - Values whose size is > 32 bit are not stored in real hard + registers. They may be stored in soft registers if there are + enough of them. */ +int +hard_regno_mode_ok (int regno, enum machine_mode mode) +{ + switch (GET_MODE_SIZE (mode)) + { + case 8: + return S_REGNO_P (regno) && m68hc11_soft_reg_count >= 4; + + case 4: + return (X_REGNO_P (regno) + || (S_REGNO_P (regno) && m68hc11_soft_reg_count >= 2)); + + case 2: + return G_REGNO_P (regno); + + case 1: + /* We have to accept a QImode in X or Y registers. Otherwise, the + reload pass will fail when some (SUBREG:QI (REG:HI X)) are defined + in the insns. Reload fails if the insn rejects the register class 'a' + as well as if it accepts it. Patterns that failed were + zero_extend_qihi2 and iorqi3. */ + + return G_REGNO_P (regno) && !SP_REGNO_P (regno); + + default: + return 0; + } +} + +int +m68hc11_hard_regno_rename_ok (int reg1, int reg2) +{ + /* Don't accept renaming to Z register. We will replace it to + X,Y or D during machine reorg pass. */ + if (reg2 == HARD_Z_REGNUM) + return 0; + + /* Don't accept renaming D,X to Y register as the code will be bigger. */ + if (TARGET_M6811 && reg2 == HARD_Y_REGNUM + && (D_REGNO_P (reg1) || X_REGNO_P (reg1))) + return 0; + + return 1; +} + +enum reg_class +preferred_reload_class (rtx operand, enum reg_class rclass) +{ + enum machine_mode mode; + + mode = GET_MODE (operand); + + if (debug_m6811) + { + printf ("Preferred reload: (class=%s): ", reg_class_names[rclass]); + } + + if (rclass == D_OR_A_OR_S_REGS && SP_REG_P (operand)) + return m68hc11_base_reg_class; + + if (rclass >= S_REGS && (GET_CODE (operand) == MEM + || GET_CODE (operand) == CONST_INT)) + { + /* S_REGS class must not be used. The movhi template does not + work to move a memory to a soft register. + Restrict to a hard reg. */ + switch (rclass) + { + default: + case G_REGS: + case D_OR_A_OR_S_REGS: + rclass = A_OR_D_REGS; + break; + case A_OR_S_REGS: + rclass = A_REGS; + break; + case D_OR_SP_OR_S_REGS: + rclass = D_OR_SP_REGS; + break; + case D_OR_Y_OR_S_REGS: + rclass = D_OR_Y_REGS; + break; + case D_OR_X_OR_S_REGS: + rclass = D_OR_X_REGS; + break; + case SP_OR_S_REGS: + rclass = SP_REGS; + break; + case Y_OR_S_REGS: + rclass = Y_REGS; + break; + case X_OR_S_REGS: + rclass = X_REGS; + break; + case D_OR_S_REGS: + rclass = D_REGS; + } + } + else if (rclass == Y_REGS && GET_CODE (operand) == MEM) + { + rclass = Y_REGS; + } + else if (rclass == A_OR_D_REGS && GET_MODE_SIZE (mode) == 4) + { + rclass = D_OR_X_REGS; + } + else if (rclass >= S_REGS && S_REG_P (operand)) + { + switch (rclass) + { + default: + case G_REGS: + case D_OR_A_OR_S_REGS: + rclass = A_OR_D_REGS; + break; + case A_OR_S_REGS: + rclass = A_REGS; + break; + case D_OR_SP_OR_S_REGS: + rclass = D_OR_SP_REGS; + break; + case D_OR_Y_OR_S_REGS: + rclass = D_OR_Y_REGS; + break; + case D_OR_X_OR_S_REGS: + rclass = D_OR_X_REGS; + break; + case SP_OR_S_REGS: + rclass = SP_REGS; + break; + case Y_OR_S_REGS: + rclass = Y_REGS; + break; + case X_OR_S_REGS: + rclass = X_REGS; + break; + case D_OR_S_REGS: + rclass = D_REGS; + } + } + else if (rclass >= S_REGS) + { + if (debug_m6811) + { + printf ("Class = %s for: ", reg_class_names[rclass]); + fflush (stdout); + debug_rtx (operand); + } + } + + if (debug_m6811) + { + printf (" => class=%s\n", reg_class_names[rclass]); + fflush (stdout); + debug_rtx (operand); + } + + return rclass; +} + +/* Return 1 if the operand is a valid indexed addressing mode. + For 68hc11: n,r with n in [0..255] and r in A_REGS class + For 68hc12: n,r no constraint on the constant, r in A_REGS class. */ +int +m68hc11_valid_addressing_p (rtx operand, enum machine_mode mode, int addr_mode) +{ + rtx base, offset; + + switch (GET_CODE (operand)) + { + case MEM: + if ((addr_mode & ADDR_INDIRECT) && GET_MODE_SIZE (mode) <= 2) + return m68hc11_valid_addressing_p (XEXP (operand, 0), mode, + addr_mode & (ADDR_STRICT | ADDR_OFFSET)); + return 0; + + case POST_INC: + case PRE_INC: + case POST_DEC: + case PRE_DEC: + if (addr_mode & ADDR_INCDEC) + return m68hc11_valid_addressing_p (XEXP (operand, 0), mode, + addr_mode & ADDR_STRICT); + return 0; + + case PLUS: + base = XEXP (operand, 0); + if (GET_CODE (base) == MEM) + return 0; + + offset = XEXP (operand, 1); + if (GET_CODE (offset) == MEM) + return 0; + + /* Indexed addressing mode with 2 registers. */ + if (GET_CODE (base) == REG && GET_CODE (offset) == REG) + { + if (!(addr_mode & ADDR_INDEXED)) + return 0; + + addr_mode &= ADDR_STRICT; + if (REGNO_OK_FOR_BASE_P2 (REGNO (base), addr_mode) + && REGNO_OK_FOR_INDEX_P2 (REGNO (offset), addr_mode)) + return 1; + + if (REGNO_OK_FOR_BASE_P2 (REGNO (offset), addr_mode) + && REGNO_OK_FOR_INDEX_P2 (REGNO (base), addr_mode)) + return 1; + + return 0; + } + + if (!(addr_mode & ADDR_OFFSET)) + return 0; + + if (GET_CODE (base) == REG) + { + if (!VALID_CONSTANT_OFFSET_P (offset, mode)) + return 0; + + if (!(addr_mode & ADDR_STRICT)) + return 1; + + return REGNO_OK_FOR_BASE_P2 (REGNO (base), 1); + } + + if (GET_CODE (offset) == REG) + { + if (!VALID_CONSTANT_OFFSET_P (base, mode)) + return 0; + + if (!(addr_mode & ADDR_STRICT)) + return 1; + + return REGNO_OK_FOR_BASE_P2 (REGNO (offset), 1); + } + return 0; + + case REG: + return REGNO_OK_FOR_BASE_P2 (REGNO (operand), addr_mode & ADDR_STRICT); + + case CONST_INT: + if (addr_mode & ADDR_CONST) + return VALID_CONSTANT_OFFSET_P (operand, mode); + return 0; + + default: + return 0; + } +} + +/* Returns 1 if the operand fits in a 68HC11 indirect mode or in + a 68HC12 1-byte index addressing mode. */ +int +m68hc11_small_indexed_indirect_p (rtx operand, enum machine_mode mode) +{ + rtx base, offset; + int addr_mode; + + if (GET_CODE (operand) == REG && reload_in_progress + && REGNO (operand) >= FIRST_PSEUDO_REGISTER + && reg_equiv_memory_loc[REGNO (operand)]) + { + operand = reg_equiv_memory_loc[REGNO (operand)]; + operand = eliminate_regs (operand, 0, NULL_RTX); + } + + if (GET_CODE (operand) != MEM) + return 0; + + operand = XEXP (operand, 0); + if (CONSTANT_ADDRESS_P (operand)) + return 1; + + if (PUSH_POP_ADDRESS_P (operand)) + return 1; + + addr_mode = m68hc11_mov_addr_mode | (reload_completed ? ADDR_STRICT : 0); + if (!m68hc11_valid_addressing_p (operand, mode, addr_mode)) + return 0; + + if (TARGET_M6812 && GET_CODE (operand) == PLUS + && (reload_completed | reload_in_progress)) + { + base = XEXP (operand, 0); + offset = XEXP (operand, 1); + + /* The offset can be a symbol address and this is too big + for the operand constraint. */ + if (GET_CODE (base) != CONST_INT && GET_CODE (offset) != CONST_INT) + return 0; + + if (GET_CODE (base) == CONST_INT) + offset = base; + + switch (GET_MODE_SIZE (mode)) + { + case 8: + if (INTVAL (offset) < -16 + 6 || INTVAL (offset) > 15 - 6) + return 0; + break; + + case 4: + if (INTVAL (offset) < -16 + 2 || INTVAL (offset) > 15 - 2) + return 0; + break; + + default: + if (INTVAL (offset) < -16 || INTVAL (offset) > 15) + return 0; + break; + } + } + return 1; +} + +int +m68hc11_register_indirect_p (rtx operand, enum machine_mode mode) +{ + int addr_mode; + + if (GET_CODE (operand) == REG && reload_in_progress + && REGNO (operand) >= FIRST_PSEUDO_REGISTER + && reg_equiv_memory_loc[REGNO (operand)]) + { + operand = reg_equiv_memory_loc[REGNO (operand)]; + operand = eliminate_regs (operand, 0, NULL_RTX); + } + if (GET_CODE (operand) != MEM) + return 0; + + operand = XEXP (operand, 0); + addr_mode = m68hc11_addr_mode | (reload_completed ? ADDR_STRICT : 0); + return m68hc11_valid_addressing_p (operand, mode, addr_mode); +} + +static int +go_if_legitimate_address_internal (rtx operand, enum machine_mode mode, + int strict) +{ + int addr_mode; + + if (CONSTANT_ADDRESS_P (operand) && TARGET_M6812) + { + /* Reject the global variables if they are too wide. This forces + a load of their address in a register and generates smaller code. */ + if (GET_MODE_SIZE (mode) == 8) + return 0; + + return 1; + } + addr_mode = m68hc11_addr_mode | (strict ? ADDR_STRICT : 0); + if (m68hc11_valid_addressing_p (operand, mode, addr_mode)) + { + return 1; + } + if (PUSH_POP_ADDRESS_P (operand)) + { + return 1; + } + if (symbolic_memory_operand (operand, mode)) + { + return 1; + } + return 0; +} + +int +m68hc11_go_if_legitimate_address (rtx operand, enum machine_mode mode, + int strict) +{ + int result; + + if (debug_m6811) + { + printf ("Checking: "); + fflush (stdout); + debug_rtx (operand); + } + + result = go_if_legitimate_address_internal (operand, mode, strict); + + if (debug_m6811) + { + printf (" -> %s\n", result == 0 ? "NO" : "YES"); + } + + if (result == 0) + { + if (debug_m6811) + { + printf ("go_if_legitimate%s, ret 0: %d:", + (strict ? "_strict" : ""), mode); + fflush (stdout); + debug_rtx (operand); + } + } + return result; +} + +int +m68hc11_legitimize_address (rtx *operand ATTRIBUTE_UNUSED, + rtx old_operand ATTRIBUTE_UNUSED, + enum machine_mode mode ATTRIBUTE_UNUSED) +{ + return 0; +} + + +int +m68hc11_reload_operands (rtx operands[]) +{ + enum machine_mode mode; + + if (regs_inited == 0) + create_regs_rtx (); + + mode = GET_MODE (operands[1]); + + /* Input reload of indirect addressing (MEM (PLUS (REG) (CONST))). */ + if (A_REG_P (operands[0]) && memory_reload_operand (operands[1], mode)) + { + rtx big_offset = XEXP (XEXP (operands[1], 0), 1); + rtx base = XEXP (XEXP (operands[1], 0), 0); + + if (GET_CODE (base) != REG) + { + rtx tmp = base; + base = big_offset; + big_offset = tmp; + } + + /* If the offset is out of range, we have to compute the address + with a separate add instruction. We try to do this with an 8-bit + add on the A register. This is possible only if the lowest part + of the offset (i.e., big_offset % 256) is a valid constant offset + with respect to the mode. If it's not, we have to generate a + 16-bit add on the D register. From: + + (SET (REG X (MEM (PLUS (REG X) (CONST_INT 1000))))) + + we generate: + + [(SET (REG D) (REG X)) (SET (REG X) (REG D))] + (SET (REG A) (PLUS (REG A) (CONST_INT 1000 / 256))) + [(SET (REG D) (REG X)) (SET (REG X) (REG D))] + (SET (REG X) (MEM (PLUS (REG X) (CONST_INT 1000 % 256))) + + (SET (REG X) (PLUS (REG X) (CONST_INT 1000 / 256 * 256))) + (SET (REG X) (MEM (PLUS (REG X) (CONST_INT 1000 % 256)))) + + */ + if (!VALID_CONSTANT_OFFSET_P (big_offset, mode)) + { + int vh, vl; + rtx reg = operands[0]; + rtx offset; + int val = INTVAL (big_offset); + + + /* We use the 'operands[0]' as a scratch register to compute the + address. Make sure 'base' is in that register. */ + if (!rtx_equal_p (base, operands[0])) + { + emit_move_insn (reg, base); + } + + if (val > 0) + { + vh = val >> 8; + vl = val & 0x0FF; + } + else + { + vh = (val >> 8) & 0x0FF; + vl = val & 0x0FF; + } + + /* Create the lowest part offset that still remains to be added. + If it's not a valid offset, do a 16-bit add. */ + offset = GEN_INT (vl); + if (!VALID_CONSTANT_OFFSET_P (offset, mode)) + { + emit_insn (gen_rtx_SET (VOIDmode, reg, + gen_rtx_PLUS (HImode, reg, big_offset))); + offset = const0_rtx; + } + else + { + emit_insn (gen_rtx_SET (VOIDmode, reg, + gen_rtx_PLUS (HImode, reg, + GEN_INT (vh << 8)))); + } + emit_move_insn (operands[0], + gen_rtx_MEM (GET_MODE (operands[1]), + gen_rtx_PLUS (Pmode, reg, offset))); + return 1; + } + } + + /* Use the normal gen_movhi pattern. */ + return 0; +} + +void +m68hc11_emit_libcall (const char *name, enum rtx_code code, + enum machine_mode dmode, enum machine_mode smode, + int noperands, rtx *operands) +{ + rtx ret; + rtx insns; + rtx libcall; + rtx equiv; + + start_sequence (); + libcall = gen_rtx_SYMBOL_REF (Pmode, name); + switch (noperands) + { + case 2: + ret = emit_library_call_value (libcall, NULL_RTX, LCT_CONST, + dmode, 1, operands[1], smode); + equiv = gen_rtx_fmt_e (code, dmode, operands[1]); + break; + + case 3: + ret = emit_library_call_value (libcall, NULL_RTX, + LCT_CONST, dmode, 2, + operands[1], smode, operands[2], + smode); + equiv = gen_rtx_fmt_ee (code, dmode, operands[1], operands[2]); + break; + + default: + gcc_unreachable (); + } + + insns = get_insns (); + end_sequence (); + emit_libcall_block (insns, operands[0], ret, equiv); +} + +/* Returns true if X is a PRE/POST increment decrement + (same as auto_inc_p() in rtlanal.c but do not take into + account the stack). */ +int +m68hc11_auto_inc_p (rtx x) +{ + return GET_CODE (x) == PRE_DEC + || GET_CODE (x) == POST_INC + || GET_CODE (x) == POST_DEC || GET_CODE (x) == PRE_INC; +} + + +/* Predicates for machine description. */ + +int +memory_reload_operand (rtx operand, enum machine_mode mode ATTRIBUTE_UNUSED) +{ + return GET_CODE (operand) == MEM + && GET_CODE (XEXP (operand, 0)) == PLUS + && ((GET_CODE (XEXP (XEXP (operand, 0), 0)) == REG + && GET_CODE (XEXP (XEXP (operand, 0), 1)) == CONST_INT) + || (GET_CODE (XEXP (XEXP (operand, 0), 1)) == REG + && GET_CODE (XEXP (XEXP (operand, 0), 0)) == CONST_INT)); +} + +int +m68hc11_symbolic_p (rtx operand, enum machine_mode mode) +{ + if (GET_CODE (operand) == MEM) + { + rtx op = XEXP (operand, 0); + + if (symbolic_memory_operand (op, mode)) + return 1; + } + return 0; +} + +int +m68hc11_indirect_p (rtx operand, enum machine_mode mode) +{ + if (GET_CODE (operand) == MEM && GET_MODE (operand) == mode) + { + rtx op = XEXP (operand, 0); + int addr_mode; + + if (m68hc11_page0_symbol_p (op)) + return 1; + + if (symbolic_memory_operand (op, mode)) + return TARGET_M6812; + + if (reload_in_progress) + return 1; + + operand = XEXP (operand, 0); + addr_mode = m68hc11_addr_mode | (reload_completed ? ADDR_STRICT : 0); + return m68hc11_valid_addressing_p (operand, mode, addr_mode); + } + return 0; +} + +int +memory_indexed_operand (rtx operand, enum machine_mode mode ATTRIBUTE_UNUSED) +{ + if (GET_CODE (operand) != MEM) + return 0; + + operand = XEXP (operand, 0); + if (GET_CODE (operand) == PLUS) + { + if (GET_CODE (XEXP (operand, 0)) == REG) + operand = XEXP (operand, 0); + else if (GET_CODE (XEXP (operand, 1)) == REG) + operand = XEXP (operand, 1); + } + return GET_CODE (operand) == REG + && (REGNO (operand) >= FIRST_PSEUDO_REGISTER + || A_REGNO_P (REGNO (operand))); +} + +int +push_pop_operand_p (rtx operand) +{ + if (GET_CODE (operand) != MEM) + { + return 0; + } + operand = XEXP (operand, 0); + return PUSH_POP_ADDRESS_P (operand); +} + +/* Returns 1 if OP is either a symbol reference or a sum of a symbol + reference and a constant. */ + +int +symbolic_memory_operand (rtx op, enum machine_mode mode) +{ + switch (GET_CODE (op)) + { + case SYMBOL_REF: + case LABEL_REF: + return 1; + + case CONST: + op = XEXP (op, 0); + return ((GET_CODE (XEXP (op, 0)) == SYMBOL_REF + || GET_CODE (XEXP (op, 0)) == LABEL_REF) + && GET_CODE (XEXP (op, 1)) == CONST_INT); + + /* ??? This clause seems to be irrelevant. */ + case CONST_DOUBLE: + return GET_MODE (op) == mode; + + case PLUS: + return symbolic_memory_operand (XEXP (op, 0), mode) + && symbolic_memory_operand (XEXP (op, 1), mode); + + default: + return 0; + } +} + +/* Emit the code to build the trampoline used to call a nested function. + + 68HC11 68HC12 + + ldy #&CXT movw #&CXT,*_.d1 + sty *_.d1 jmp FNADDR + jmp FNADDR + +*/ +void +m68hc11_initialize_trampoline (rtx tramp, rtx fnaddr, rtx cxt) +{ + const char *static_chain_reg = reg_names[STATIC_CHAIN_REGNUM]; + + /* Skip the '*'. */ + if (*static_chain_reg == '*') + static_chain_reg++; + if (TARGET_M6811) + { + emit_move_insn (gen_rtx_MEM (HImode, tramp), GEN_INT (0x18ce)); + emit_move_insn (gen_rtx_MEM (HImode, plus_constant (tramp, 2)), cxt); + emit_move_insn (gen_rtx_MEM (HImode, plus_constant (tramp, 4)), + GEN_INT (0x18df)); + emit_move_insn (gen_rtx_MEM (QImode, plus_constant (tramp, 6)), + gen_rtx_CONST (QImode, + gen_rtx_SYMBOL_REF (Pmode, + static_chain_reg))); + emit_move_insn (gen_rtx_MEM (QImode, plus_constant (tramp, 7)), + GEN_INT (0x7e)); + emit_move_insn (gen_rtx_MEM (HImode, plus_constant (tramp, 8)), fnaddr); + } + else + { + emit_move_insn (gen_rtx_MEM (HImode, tramp), GEN_INT (0x1803)); + emit_move_insn (gen_rtx_MEM (HImode, plus_constant (tramp, 2)), cxt); + emit_move_insn (gen_rtx_MEM (HImode, plus_constant (tramp, 4)), + gen_rtx_CONST (HImode, + gen_rtx_SYMBOL_REF (Pmode, + static_chain_reg))); + emit_move_insn (gen_rtx_MEM (QImode, plus_constant (tramp, 6)), + GEN_INT (0x06)); + emit_move_insn (gen_rtx_MEM (HImode, plus_constant (tramp, 7)), fnaddr); + } +} + +/* Declaration of types. */ + +/* Handle an "tiny_data" attribute; arguments as in + struct attribute_spec.handler. */ +static tree +m68hc11_handle_page0_attribute (tree *node, tree name, + tree args ATTRIBUTE_UNUSED, + int flags ATTRIBUTE_UNUSED, bool *no_add_attrs) +{ + tree decl = *node; + + if (TREE_STATIC (decl) || DECL_EXTERNAL (decl)) + { + DECL_SECTION_NAME (decl) = build_string (6, ".page0"); + } + else + { + warning (OPT_Wattributes, "%qs attribute ignored", + IDENTIFIER_POINTER (name)); + *no_add_attrs = true; + } + + return NULL_TREE; +} + +const struct attribute_spec m68hc11_attribute_table[] = +{ + /* { name, min_len, max_len, decl_req, type_req, fn_type_req, handler } */ + { "interrupt", 0, 0, false, true, true, m68hc11_handle_fntype_attribute }, + { "trap", 0, 0, false, true, true, m68hc11_handle_fntype_attribute }, + { "far", 0, 0, false, true, true, m68hc11_handle_fntype_attribute }, + { "near", 0, 0, false, true, true, m68hc11_handle_fntype_attribute }, + { "page0", 0, 0, false, false, false, m68hc11_handle_page0_attribute }, + { NULL, 0, 0, false, false, false, NULL } +}; + +/* Keep track of the symbol which has a `trap' attribute and which uses + the `swi' calling convention. Since there is only one trap, we only + record one such symbol. If there are several, a warning is reported. */ +static rtx trap_handler_symbol = 0; + +/* Handle an attribute requiring a FUNCTION_TYPE, FIELD_DECL or TYPE_DECL; + arguments as in struct attribute_spec.handler. */ +static tree +m68hc11_handle_fntype_attribute (tree *node, tree name, + tree args ATTRIBUTE_UNUSED, + int flags ATTRIBUTE_UNUSED, + bool *no_add_attrs) +{ + if (TREE_CODE (*node) != FUNCTION_TYPE + && TREE_CODE (*node) != METHOD_TYPE + && TREE_CODE (*node) != FIELD_DECL + && TREE_CODE (*node) != TYPE_DECL) + { + warning (OPT_Wattributes, "%qs attribute only applies to functions", + IDENTIFIER_POINTER (name)); + *no_add_attrs = true; + } + + return NULL_TREE; +} +/* Undo the effects of the above. */ + +static const char * +m68hc11_strip_name_encoding (const char *str) +{ + return str + (*str == '*' || *str == '@' || *str == '&'); +} + +static void +m68hc11_encode_label (tree decl) +{ + const char *str = XSTR (XEXP (DECL_RTL (decl), 0), 0); + int len = strlen (str); + char *newstr = XALLOCAVEC (char, len + 2); + + newstr[0] = '@'; + strcpy (&newstr[1], str); + + XSTR (XEXP (DECL_RTL (decl), 0), 0) = ggc_alloc_string (newstr, len + 1); +} + +/* Return 1 if this is a symbol in page0 */ +int +m68hc11_page0_symbol_p (rtx x) +{ + switch (GET_CODE (x)) + { + case SYMBOL_REF: + return XSTR (x, 0) != 0 && XSTR (x, 0)[0] == '@'; + + case CONST: + return m68hc11_page0_symbol_p (XEXP (x, 0)); + + case PLUS: + if (!m68hc11_page0_symbol_p (XEXP (x, 0))) + return 0; + + return GET_CODE (XEXP (x, 1)) == CONST_INT + && INTVAL (XEXP (x, 1)) < 256 + && INTVAL (XEXP (x, 1)) >= 0; + + default: + return 0; + } +} + +/* We want to recognize trap handlers so that we handle calls to traps + in a special manner (by issuing the trap). This information is stored + in SYMBOL_REF_FLAG. */ + +static void +m68hc11_encode_section_info (tree decl, rtx rtl, int first ATTRIBUTE_UNUSED) +{ + tree func_attr; + int trap_handler; + int is_far = 0; + + if (TREE_CODE (decl) == VAR_DECL) + { + if (lookup_attribute ("page0", DECL_ATTRIBUTES (decl)) != 0) + m68hc11_encode_label (decl); + return; + } + + if (TREE_CODE (decl) != FUNCTION_DECL) + return; + + func_attr = TYPE_ATTRIBUTES (TREE_TYPE (decl)); + + + if (lookup_attribute ("far", func_attr) != NULL_TREE) + is_far = 1; + else if (lookup_attribute ("near", func_attr) == NULL_TREE) + is_far = TARGET_LONG_CALLS != 0; + + trap_handler = lookup_attribute ("trap", func_attr) != NULL_TREE; + if (trap_handler && is_far) + { + warning (OPT_Wattributes, "%<trap%> and %<far%> attributes are " + "not compatible, ignoring %<far%>"); + trap_handler = 0; + } + if (trap_handler) + { + if (trap_handler_symbol != 0) + warning (OPT_Wattributes, "%<trap%> attribute is already used"); + else + trap_handler_symbol = XEXP (rtl, 0); + } + SYMBOL_REF_FLAG (XEXP (rtl, 0)) = is_far; +} + +static unsigned int +m68hc11_section_type_flags (tree decl, const char *name, int reloc) +{ + unsigned int flags = default_section_type_flags (decl, name, reloc); + + if (strncmp (name, ".eeprom", 7) == 0) + { + flags |= SECTION_WRITE | SECTION_CODE | SECTION_OVERRIDE; + } + + return flags; +} + +int +m68hc11_is_far_symbol (rtx sym) +{ + if (GET_CODE (sym) == MEM) + sym = XEXP (sym, 0); + + return SYMBOL_REF_FLAG (sym); +} + +int +m68hc11_is_trap_symbol (rtx sym) +{ + if (GET_CODE (sym) == MEM) + sym = XEXP (sym, 0); + + return trap_handler_symbol != 0 && rtx_equal_p (trap_handler_symbol, sym); +} + + +/* Argument support functions. */ + +/* Define the offset between two registers, one to be eliminated, and the + other its replacement, at the start of a routine. */ +int +m68hc11_initial_elimination_offset (int from, int to) +{ + int trap_handler; + tree func_attr; + int size; + int regno; + + /* For a trap handler, we must take into account the registers which + are pushed on the stack during the trap (except the PC). */ + func_attr = TYPE_ATTRIBUTES (TREE_TYPE (current_function_decl)); + current_function_interrupt = lookup_attribute ("interrupt", + func_attr) != NULL_TREE; + trap_handler = lookup_attribute ("trap", func_attr) != NULL_TREE; + + if (lookup_attribute ("far", func_attr) != 0) + current_function_far = 1; + else if (lookup_attribute ("near", func_attr) != 0) + current_function_far = 0; + else + current_function_far = (TARGET_LONG_CALLS != 0 + && !current_function_interrupt + && !trap_handler); + + if (trap_handler && from == ARG_POINTER_REGNUM) + size = 7; + + /* For a function using 'call/rtc' we must take into account the + page register which is pushed in the call. */ + else if (current_function_far && from == ARG_POINTER_REGNUM) + size = 1; + else + size = 0; + + if (from == ARG_POINTER_REGNUM && to == HARD_FRAME_POINTER_REGNUM) + { + /* 2 is for the saved frame. + 1 is for the 'sts' correction when creating the frame. */ + return get_frame_size () + 2 + m68hc11_sp_correction + size; + } + + if (from == FRAME_POINTER_REGNUM && to == HARD_FRAME_POINTER_REGNUM) + { + return m68hc11_sp_correction; + } + + /* Push any 2 byte pseudo hard registers that we need to save. */ + for (regno = SOFT_REG_FIRST; regno < SOFT_REG_LAST; regno++) + { + if (df_regs_ever_live_p (regno) && !call_used_regs[regno]) + { + size += 2; + } + } + + if (from == ARG_POINTER_REGNUM && to == HARD_SP_REGNUM) + { + return get_frame_size () + size; + } + + if (from == FRAME_POINTER_REGNUM && to == HARD_SP_REGNUM) + { + return size; + } + return 0; +} + +/* Initialize a variable CUM of type CUMULATIVE_ARGS + for a call to a function whose data type is FNTYPE. + For a library call, FNTYPE is 0. */ + +void +m68hc11_init_cumulative_args (CUMULATIVE_ARGS *cum, tree fntype, rtx libname) +{ + tree ret_type; + + z_replacement_completed = 0; + cum->words = 0; + cum->nregs = 0; + + /* For a library call, we must find out the type of the return value. + When the return value is bigger than 4 bytes, it is returned in + memory. In that case, the first argument of the library call is a + pointer to the memory location. Because the first argument is passed in + register D, we have to identify this, so that the first function + parameter is not passed in D either. */ + if (fntype == 0) + { + const char *name; + size_t len; + + if (libname == 0 || GET_CODE (libname) != SYMBOL_REF) + return; + + /* If the library ends in 'di' or in 'df', we assume it's + returning some DImode or some DFmode which are 64-bit wide. */ + name = XSTR (libname, 0); + len = strlen (name); + if (len > 3 + && ((name[len - 2] == 'd' + && (name[len - 1] == 'f' || name[len - 1] == 'i')) + || (name[len - 3] == 'd' + && (name[len - 2] == 'i' || name[len - 2] == 'f')))) + { + /* We are in. Mark the first parameter register as already used. */ + cum->words = 1; + cum->nregs = 1; + } + return; + } + + ret_type = TREE_TYPE (fntype); + + if (ret_type && aggregate_value_p (ret_type, fntype)) + { + cum->words = 1; + cum->nregs = 1; + } +} + +/* Update the data in CUM to advance over an argument + of mode MODE and data type TYPE. + (TYPE is null for libcalls where that information may not be available.) */ + +void +m68hc11_function_arg_advance (CUMULATIVE_ARGS *cum, enum machine_mode mode, + tree type, int named ATTRIBUTE_UNUSED) +{ + if (mode != BLKmode) + { + if (cum->words == 0 && GET_MODE_SIZE (mode) == 4) + { + cum->nregs = 2; + cum->words = GET_MODE_SIZE (mode); + } + else + { + cum->words += GET_MODE_SIZE (mode); + if (cum->words <= HARD_REG_SIZE) + cum->nregs = 1; + } + } + else + { + cum->words += int_size_in_bytes (type); + } + return; +} + +/* Define where to put the arguments to a function. + Value is zero to push the argument on the stack, + or a hard register in which to store the argument. + + MODE is the argument's machine mode. + TYPE is the data type of the argument (as a tree). + This is null for libcalls where that information may + not be available. + CUM is a variable of type CUMULATIVE_ARGS which gives info about + the preceding args and about the function being called. + NAMED is nonzero if this argument is a named parameter + (otherwise it is an extra parameter matching an ellipsis). */ + +struct rtx_def * +m68hc11_function_arg (const CUMULATIVE_ARGS *cum, enum machine_mode mode, + tree type ATTRIBUTE_UNUSED, int named ATTRIBUTE_UNUSED) +{ + if (cum->words != 0) + { + return NULL_RTX; + } + + if (mode != BLKmode) + { + if (GET_MODE_SIZE (mode) == 2 * HARD_REG_SIZE) + return gen_rtx_REG (mode, HARD_X_REGNUM); + + if (GET_MODE_SIZE (mode) > HARD_REG_SIZE) + { + return NULL_RTX; + } + return gen_rtx_REG (mode, HARD_D_REGNUM); + } + return NULL_RTX; +} + +/* If defined, a C expression which determines whether, and in which direction, + to pad out an argument with extra space. The value should be of type + `enum direction': either `upward' to pad above the argument, + `downward' to pad below, or `none' to inhibit padding. + + Structures are stored left shifted in their argument slot. */ +int +m68hc11_function_arg_padding (enum machine_mode mode, const_tree type) +{ + if (type != 0 && AGGREGATE_TYPE_P (type)) + return upward; + + /* Fall back to the default. */ + return DEFAULT_FUNCTION_ARG_PADDING (mode, type); +} + + +/* Function prologue and epilogue. */ + +/* Emit a move after the reload pass has completed. This is used to + emit the prologue and epilogue. */ +static void +emit_move_after_reload (rtx to, rtx from, rtx scratch) +{ + rtx insn; + + if (TARGET_M6812 || H_REG_P (to) || H_REG_P (from)) + { + insn = emit_move_insn (to, from); + } + else + { + emit_move_insn (scratch, from); + insn = emit_move_insn (to, scratch); + } + + /* Put a REG_INC note to tell the flow analysis that the instruction + is necessary. */ + if (IS_STACK_PUSH (to)) + { + REG_NOTES (insn) = gen_rtx_EXPR_LIST (REG_INC, + XEXP (XEXP (to, 0), 0), + REG_NOTES (insn)); + } + else if (IS_STACK_POP (from)) + { + REG_NOTES (insn) = gen_rtx_EXPR_LIST (REG_INC, + XEXP (XEXP (from, 0), 0), + REG_NOTES (insn)); + } + + /* For 68HC11, put a REG_INC note on `sts _.frame' to prevent the cse-reg + to think that sp == _.frame and later replace a x = sp with x = _.frame. + The problem is that we are lying to gcc and use `txs' for x = sp + (which is not really true because txs is really x = sp + 1). */ + else if (TARGET_M6811 && SP_REG_P (from)) + { + REG_NOTES (insn) = gen_rtx_EXPR_LIST (REG_INC, + from, + REG_NOTES (insn)); + } +} + +int +m68hc11_total_frame_size (void) +{ + int size; + int regno; + + size = get_frame_size (); + if (current_function_interrupt) + { + size += 3 * HARD_REG_SIZE; + } + if (frame_pointer_needed) + size += HARD_REG_SIZE; + + for (regno = SOFT_REG_FIRST; regno <= SOFT_REG_LAST; regno++) + if (df_regs_ever_live_p (regno) && !call_used_regs[regno]) + size += HARD_REG_SIZE; + + return size; +} + +static void +m68hc11_output_function_epilogue (FILE *out ATTRIBUTE_UNUSED, + HOST_WIDE_INT size ATTRIBUTE_UNUSED) +{ + /* We catch the function epilogue generation to have a chance + to clear the z_replacement_completed flag. */ + z_replacement_completed = 0; +} + +void +expand_prologue (void) +{ + tree func_attr; + int size; + int regno; + rtx scratch; + + gcc_assert (reload_completed == 1); + + size = get_frame_size (); + + create_regs_rtx (); + + /* Generate specific prologue for interrupt handlers. */ + func_attr = TYPE_ATTRIBUTES (TREE_TYPE (current_function_decl)); + current_function_interrupt = lookup_attribute ("interrupt", + func_attr) != NULL_TREE; + current_function_trap = lookup_attribute ("trap", func_attr) != NULL_TREE; + if (lookup_attribute ("far", func_attr) != NULL_TREE) + current_function_far = 1; + else if (lookup_attribute ("near", func_attr) != NULL_TREE) + current_function_far = 0; + else + current_function_far = (TARGET_LONG_CALLS != 0 + && !current_function_interrupt + && !current_function_trap); + + /* Get the scratch register to build the frame and push registers. + If the first argument is a 32-bit quantity, the D+X registers + are used. Use Y to compute the frame. Otherwise, X is cheaper. + For 68HC12, this scratch register is not used. */ + if (crtl->args.info.nregs == 2) + scratch = iy_reg; + else + scratch = ix_reg; + + /* Save current stack frame. */ + if (frame_pointer_needed) + emit_move_after_reload (stack_push_word, hard_frame_pointer_rtx, scratch); + + /* For an interrupt handler, we must preserve _.tmp, _.z and _.xy. + Other soft registers in page0 need not to be saved because they + will be restored by C functions. For a trap handler, we don't + need to preserve these registers because this is a synchronous call. */ + if (current_function_interrupt) + { + emit_move_after_reload (stack_push_word, m68hc11_soft_tmp_reg, scratch); + emit_move_after_reload (stack_push_word, + gen_rtx_REG (HImode, SOFT_Z_REGNUM), scratch); + emit_move_after_reload (stack_push_word, + gen_rtx_REG (HImode, SOFT_SAVED_XY_REGNUM), + scratch); + } + + /* Allocate local variables. */ + if (TARGET_M6812 && (size > 4 || size == 3)) + { + emit_insn (gen_addhi3 (stack_pointer_rtx, + stack_pointer_rtx, GEN_INT (-size))); + } + else if ((!optimize_size && size > 8) || (optimize_size && size > 10)) + { + rtx insn; + + insn = gen_rtx_PARALLEL + (VOIDmode, + gen_rtvec (2, + gen_rtx_SET (VOIDmode, + stack_pointer_rtx, + gen_rtx_PLUS (HImode, + stack_pointer_rtx, + GEN_INT (-size))), + gen_rtx_CLOBBER (VOIDmode, scratch))); + emit_insn (insn); + } + else + { + int i; + + /* Allocate by pushing scratch values. */ + for (i = 2; i <= size; i += 2) + emit_move_after_reload (stack_push_word, ix_reg, 0); + + if (size & 1) + emit_insn (gen_addhi3 (stack_pointer_rtx, + stack_pointer_rtx, constm1_rtx)); + } + + /* Create the frame pointer. */ + if (frame_pointer_needed) + emit_move_after_reload (hard_frame_pointer_rtx, + stack_pointer_rtx, scratch); + + /* Push any 2 byte pseudo hard registers that we need to save. */ + for (regno = SOFT_REG_FIRST; regno <= SOFT_REG_LAST; regno++) + { + if (df_regs_ever_live_p (regno) && !call_used_regs[regno]) + { + emit_move_after_reload (stack_push_word, + gen_rtx_REG (HImode, regno), scratch); + } + } +} + +void +expand_epilogue (void) +{ + int size; + register int regno; + int return_size; + rtx scratch; + + gcc_assert (reload_completed == 1); + + size = get_frame_size (); + + /* If we are returning a value in two registers, we have to preserve the + X register and use the Y register to restore the stack and the saved + registers. Otherwise, use X because it's faster (and smaller). */ + if (crtl->return_rtx == 0) + return_size = 0; + else if (GET_CODE (crtl->return_rtx) == MEM) + return_size = HARD_REG_SIZE; + else + return_size = GET_MODE_SIZE (GET_MODE (crtl->return_rtx)); + + if (return_size > HARD_REG_SIZE && return_size <= 2 * HARD_REG_SIZE) + scratch = iy_reg; + else + scratch = ix_reg; + + /* Pop any 2 byte pseudo hard registers that we saved. */ + for (regno = SOFT_REG_LAST; regno >= SOFT_REG_FIRST; regno--) + { + if (df_regs_ever_live_p (regno) && !call_used_regs[regno]) + { + emit_move_after_reload (gen_rtx_REG (HImode, regno), + stack_pop_word, scratch); + } + } + + /* de-allocate auto variables */ + if (TARGET_M6812 && (size > 4 || size == 3)) + { + emit_insn (gen_addhi3 (stack_pointer_rtx, + stack_pointer_rtx, GEN_INT (size))); + } + else if ((!optimize_size && size > 8) || (optimize_size && size > 10)) + { + rtx insn; + + insn = gen_rtx_PARALLEL + (VOIDmode, + gen_rtvec (2, + gen_rtx_SET (VOIDmode, + stack_pointer_rtx, + gen_rtx_PLUS (HImode, + stack_pointer_rtx, + GEN_INT (size))), + gen_rtx_CLOBBER (VOIDmode, scratch))); + emit_insn (insn); + } + else + { + int i; + + for (i = 2; i <= size; i += 2) + emit_move_after_reload (scratch, stack_pop_word, scratch); + if (size & 1) + emit_insn (gen_addhi3 (stack_pointer_rtx, + stack_pointer_rtx, const1_rtx)); + } + + /* For an interrupt handler, restore ZTMP, ZREG and XYREG. */ + if (current_function_interrupt) + { + emit_move_after_reload (gen_rtx_REG (HImode, SOFT_SAVED_XY_REGNUM), + stack_pop_word, scratch); + emit_move_after_reload (gen_rtx_REG (HImode, SOFT_Z_REGNUM), + stack_pop_word, scratch); + emit_move_after_reload (m68hc11_soft_tmp_reg, stack_pop_word, scratch); + } + + /* Restore previous frame pointer. */ + if (frame_pointer_needed) + emit_move_after_reload (hard_frame_pointer_rtx, stack_pop_word, scratch); + + /* If the trap handler returns some value, copy the value + in D, X onto the stack so that the rti will pop the return value + correctly. */ + else if (current_function_trap && return_size != 0) + { + rtx addr_reg = stack_pointer_rtx; + + if (!TARGET_M6812) + { + emit_move_after_reload (scratch, stack_pointer_rtx, 0); + addr_reg = scratch; + } + emit_move_after_reload (gen_rtx_MEM (HImode, + gen_rtx_PLUS (HImode, addr_reg, + const1_rtx)), d_reg, 0); + if (return_size > HARD_REG_SIZE) + emit_move_after_reload (gen_rtx_MEM (HImode, + gen_rtx_PLUS (HImode, addr_reg, + GEN_INT (3))), ix_reg, 0); + } + + emit_jump_insn (gen_return ()); +} + + +/* Low and High part extraction for 68HC11. These routines are + similar to gen_lowpart and gen_highpart but they have been + fixed to work for constants and 68HC11 specific registers. */ + +rtx +m68hc11_gen_lowpart (enum machine_mode mode, rtx x) +{ + /* We assume that the low part of an auto-inc mode is the same with + the mode changed and that the caller split the larger mode in the + correct order. */ + if (GET_CODE (x) == MEM && m68hc11_auto_inc_p (XEXP (x, 0))) + { + return gen_rtx_MEM (mode, XEXP (x, 0)); + } + + /* Note that a CONST_DOUBLE rtx could represent either an integer or a + floating-point constant. A CONST_DOUBLE is used whenever the + constant requires more than one word in order to be adequately + represented. */ + if (GET_CODE (x) == CONST_DOUBLE) + { + long l[2]; + + if (GET_MODE_CLASS (GET_MODE (x)) == MODE_FLOAT) + { + REAL_VALUE_TYPE r; + + if (GET_MODE (x) == SFmode) + { + REAL_VALUE_FROM_CONST_DOUBLE (r, x); + REAL_VALUE_TO_TARGET_SINGLE (r, l[0]); + } + else + { + rtx first, second; + + split_double (x, &first, &second); + return second; + } + if (mode == SImode) + return GEN_INT (l[0]); + + return gen_int_mode (l[0], HImode); + } + else + { + l[0] = CONST_DOUBLE_LOW (x); + } + switch (mode) + { + case SImode: + return GEN_INT (l[0]); + case HImode: + gcc_assert (GET_MODE (x) == SFmode); + return gen_int_mode (l[0], HImode); + default: + gcc_unreachable (); + } + } + + if (mode == QImode && D_REG_P (x)) + return gen_rtx_REG (mode, HARD_B_REGNUM); + + /* gen_lowpart crashes when it is called with a SUBREG. */ + if (GET_CODE (x) == SUBREG && SUBREG_BYTE (x) != 0) + { + switch (mode) + { + case SImode: + return gen_rtx_SUBREG (mode, SUBREG_REG (x), SUBREG_BYTE (x) + 4); + case HImode: + return gen_rtx_SUBREG (mode, SUBREG_REG (x), SUBREG_BYTE (x) + 2); + default: + gcc_unreachable (); + } + } + x = gen_lowpart (mode, x); + + /* Return a different rtx to avoid to share it in several insns + (when used by a split pattern). Sharing addresses within + a MEM breaks the Z register replacement (and reloading). */ + if (GET_CODE (x) == MEM) + x = copy_rtx (x); + return x; +} + +rtx +m68hc11_gen_highpart (enum machine_mode mode, rtx x) +{ + /* We assume that the high part of an auto-inc mode is the same with + the mode changed and that the caller split the larger mode in the + correct order. */ + if (GET_CODE (x) == MEM && m68hc11_auto_inc_p (XEXP (x, 0))) + { + return gen_rtx_MEM (mode, XEXP (x, 0)); + } + + /* Note that a CONST_DOUBLE rtx could represent either an integer or a + floating-point constant. A CONST_DOUBLE is used whenever the + constant requires more than one word in order to be adequately + represented. */ + if (GET_CODE (x) == CONST_DOUBLE) + { + long l[2]; + + if (GET_MODE_CLASS (GET_MODE (x)) == MODE_FLOAT) + { + REAL_VALUE_TYPE r; + + if (GET_MODE (x) == SFmode) + { + REAL_VALUE_FROM_CONST_DOUBLE (r, x); + REAL_VALUE_TO_TARGET_SINGLE (r, l[1]); + } + else + { + rtx first, second; + + split_double (x, &first, &second); + return first; + } + if (mode == SImode) + return GEN_INT (l[1]); + + return gen_int_mode ((l[1] >> 16), HImode); + } + else + { + l[1] = CONST_DOUBLE_HIGH (x); + } + + switch (mode) + { + case SImode: + return GEN_INT (l[1]); + case HImode: + gcc_assert (GET_MODE_CLASS (GET_MODE (x)) == MODE_FLOAT); + return gen_int_mode ((l[0] >> 16), HImode); + default: + gcc_unreachable (); + } + } + if (GET_CODE (x) == CONST_INT) + { + HOST_WIDE_INT val = INTVAL (x); + + if (mode == QImode) + { + return gen_int_mode (val >> 8, QImode); + } + else if (mode == HImode) + { + return gen_int_mode (val >> 16, HImode); + } + else if (mode == SImode) + { + return gen_int_mode (val >> 32, SImode); + } + } + if (mode == QImode && D_REG_P (x)) + return gen_rtx_REG (mode, HARD_A_REGNUM); + + /* There is no way in GCC to represent the upper part of a word register. + To obtain the 8-bit upper part of a soft register, we change the + reg into a mem rtx. This is possible because they are physically + located in memory. There is no offset because we are big-endian. */ + if (mode == QImode && S_REG_P (x)) + { + int pos; + + /* Avoid the '*' for direct addressing mode when this + addressing mode is disabled. */ + pos = TARGET_NO_DIRECT_MODE ? 1 : 0; + return gen_rtx_MEM (QImode, + gen_rtx_SYMBOL_REF (Pmode, + ®_names[REGNO (x)][pos])); + } + + /* gen_highpart crashes when it is called with a SUBREG. */ + switch (GET_CODE (x)) + { + case SUBREG: + return gen_rtx_SUBREG (mode, XEXP (x, 0), XINT (x, 1)); + case REG: + if (REGNO (x) < FIRST_PSEUDO_REGISTER) + return gen_rtx_REG (mode, REGNO (x)); + else + return gen_rtx_SUBREG (mode, x, 0); + case MEM: + x = change_address (x, mode, 0); + + /* Return a different rtx to avoid to share it in several insns + (when used by a split pattern). Sharing addresses within + a MEM breaks the Z register replacement (and reloading). */ + if (GET_CODE (x) == MEM) + x = copy_rtx (x); + return x; + + default: + gcc_unreachable (); + } +} + + +/* Obscure register manipulation. */ + +/* Finds backward in the instructions to see if register 'reg' is + dead. This is used when generating code to see if we can use 'reg' + as a scratch register. This allows us to choose a better generation + of code when we know that some register dies or can be clobbered. */ + +int +dead_register_here (rtx x, rtx reg) +{ + rtx x_reg; + rtx p; + + if (D_REG_P (reg)) + x_reg = gen_rtx_REG (SImode, HARD_X_REGNUM); + else + x_reg = 0; + + for (p = PREV_INSN (x); p && GET_CODE (p) != CODE_LABEL; p = PREV_INSN (p)) + if (INSN_P (p)) + { + rtx body; + + body = PATTERN (p); + + if (GET_CODE (body) == CALL_INSN) + break; + if (GET_CODE (body) == JUMP_INSN) + break; + + if (GET_CODE (body) == SET) + { + rtx dst = XEXP (body, 0); + + if (GET_CODE (dst) == REG && REGNO (dst) == REGNO (reg)) + break; + if (x_reg && rtx_equal_p (dst, x_reg)) + break; + + if (find_regno_note (p, REG_DEAD, REGNO (reg))) + return 1; + } + else if (reg_mentioned_p (reg, p) + || (x_reg && reg_mentioned_p (x_reg, p))) + break; + } + + /* Scan forward to see if the register is set in some insns and never + used since then. */ + for (p = x /*NEXT_INSN (x) */ ; p; p = NEXT_INSN (p)) + { + rtx body; + + if (GET_CODE (p) == CODE_LABEL + || GET_CODE (p) == JUMP_INSN + || GET_CODE (p) == CALL_INSN || GET_CODE (p) == BARRIER) + break; + + if (GET_CODE (p) != INSN) + continue; + + body = PATTERN (p); + if (GET_CODE (body) == SET) + { + rtx src = XEXP (body, 1); + rtx dst = XEXP (body, 0); + + if (GET_CODE (dst) == REG + && REGNO (dst) == REGNO (reg) && !reg_mentioned_p (reg, src)) + return 1; + } + + /* Register is used (may be in source or in dest). */ + if (reg_mentioned_p (reg, p) + || (x_reg != 0 && GET_MODE (p) == SImode + && reg_mentioned_p (x_reg, p))) + break; + } + return p == 0 ? 1 : 0; +} + + +/* Code generation operations called from machine description file. */ + +/* Print the name of register 'regno' in the assembly file. */ +static void +asm_print_register (FILE *file, int regno) +{ + const char *name = reg_names[regno]; + + if (TARGET_NO_DIRECT_MODE && name[0] == '*') + name++; + + fprintf (file, "%s", name); +} + +/* A C compound statement to output to stdio stream STREAM the + assembler syntax for an instruction operand X. X is an RTL + expression. + + CODE is a value that can be used to specify one of several ways + of printing the operand. It is used when identical operands + must be printed differently depending on the context. CODE + comes from the `%' specification that was used to request + printing of the operand. If the specification was just `%DIGIT' + then CODE is 0; if the specification was `%LTR DIGIT' then CODE + is the ASCII code for LTR. + + If X is a register, this macro should print the register's name. + The names can be found in an array `reg_names' whose type is + `char *[]'. `reg_names' is initialized from `REGISTER_NAMES'. + + When the machine description has a specification `%PUNCT' (a `%' + followed by a punctuation character), this macro is called with + a null pointer for X and the punctuation character for CODE. + + The M68HC11 specific codes are: + + 'b' for the low part of the operand. + 'h' for the high part of the operand + The 'b' or 'h' modifiers have no effect if the operand has + the QImode and is not a S_REG_P (soft register). If the + operand is a hard register, these two modifiers have no effect. + 't' generate the temporary scratch register. The operand is + ignored. + 'T' generate the low-part temporary scratch register. The operand is + ignored. */ + +void +print_operand (FILE *file, rtx op, int letter) +{ + if (letter == 't') + { + asm_print_register (file, SOFT_TMP_REGNUM); + return; + } + else if (letter == 'T') + { + asm_print_register (file, SOFT_TMP_REGNUM); + fprintf (file, "+1"); + return; + } + else if (letter == '#') + { + asm_fprintf (file, "%I"); + } + + if (GET_CODE (op) == REG) + { + if (letter == 'b' && S_REG_P (op)) + { + asm_print_register (file, REGNO (op)); + fprintf (file, "+1"); + } + else if (letter == 'b' && D_REG_P (op)) + { + asm_print_register (file, HARD_B_REGNUM); + } + else + { + asm_print_register (file, REGNO (op)); + } + return; + } + + if (GET_CODE (op) == SYMBOL_REF && (letter == 'b' || letter == 'h')) + { + if (letter == 'b') + asm_fprintf (file, "%I%%lo("); + else + asm_fprintf (file, "%I%%hi("); + + output_addr_const (file, op); + fprintf (file, ")"); + return; + } + + /* Get the low or high part of the operand when 'b' or 'h' modifiers + are specified. If we already have a QImode, there is nothing to do. */ + if (GET_MODE (op) == HImode || GET_MODE (op) == VOIDmode) + { + if (letter == 'b') + { + op = m68hc11_gen_lowpart (QImode, op); + } + else if (letter == 'h') + { + op = m68hc11_gen_highpart (QImode, op); + } + } + + if (GET_CODE (op) == MEM) + { + rtx base = XEXP (op, 0); + switch (GET_CODE (base)) + { + case PRE_DEC: + gcc_assert (TARGET_M6812); + fprintf (file, "%u,-", GET_MODE_SIZE (GET_MODE (op))); + asm_print_register (file, REGNO (XEXP (base, 0))); + break; + + case POST_DEC: + gcc_assert (TARGET_M6812); + fprintf (file, "%u,", GET_MODE_SIZE (GET_MODE (op))); + asm_print_register (file, REGNO (XEXP (base, 0))); + fprintf (file, "-"); + break; + + case POST_INC: + gcc_assert (TARGET_M6812); + fprintf (file, "%u,", GET_MODE_SIZE (GET_MODE (op))); + asm_print_register (file, REGNO (XEXP (base, 0))); + fprintf (file, "+"); + break; + + case PRE_INC: + gcc_assert (TARGET_M6812); + fprintf (file, "%u,+", GET_MODE_SIZE (GET_MODE (op))); + asm_print_register (file, REGNO (XEXP (base, 0))); + break; + + case MEM: + gcc_assert (TARGET_M6812); + fprintf (file, "["); + print_operand_address (file, XEXP (base, 0)); + fprintf (file, "]"); + break; + + default: + if (m68hc11_page0_symbol_p (base)) + fprintf (file, "*"); + + output_address (base); + break; + } + } + else if (GET_CODE (op) == CONST_DOUBLE && GET_MODE (op) == SFmode) + { + REAL_VALUE_TYPE r; + long l; + + REAL_VALUE_FROM_CONST_DOUBLE (r, op); + REAL_VALUE_TO_TARGET_SINGLE (r, l); + asm_fprintf (file, "%I0x%lx", l); + } + else if (GET_CODE (op) == CONST_DOUBLE && GET_MODE (op) == DFmode) + { + char dstr[30]; + + real_to_decimal (dstr, CONST_DOUBLE_REAL_VALUE (op), + sizeof (dstr), 0, 1); + asm_fprintf (file, "%I0r%s", dstr); + } + else + { + int need_parenthesize = 0; + + if (letter != 'i') + asm_fprintf (file, "%I"); + else + need_parenthesize = must_parenthesize (op); + + if (need_parenthesize) + fprintf (file, "("); + + output_addr_const (file, op); + if (need_parenthesize) + fprintf (file, ")"); + } +} + +/* Returns true if the operand 'op' must be printed with parenthesis + around it. This must be done only if there is a symbol whose name + is a processor register. */ +static int +must_parenthesize (rtx op) +{ + const char *name; + + switch (GET_CODE (op)) + { + case SYMBOL_REF: + name = XSTR (op, 0); + /* Avoid a conflict between symbol name and a possible + register. */ + return (strcasecmp (name, "a") == 0 + || strcasecmp (name, "b") == 0 + || strcasecmp (name, "d") == 0 + || strcasecmp (name, "x") == 0 + || strcasecmp (name, "y") == 0 + || strcasecmp (name, "ix") == 0 + || strcasecmp (name, "iy") == 0 + || strcasecmp (name, "pc") == 0 + || strcasecmp (name, "sp") == 0 + || strcasecmp (name, "ccr") == 0) ? 1 : 0; + + case PLUS: + case MINUS: + return must_parenthesize (XEXP (op, 0)) + || must_parenthesize (XEXP (op, 1)); + + case MEM: + case CONST: + case ZERO_EXTEND: + case SIGN_EXTEND: + return must_parenthesize (XEXP (op, 0)); + + case CONST_DOUBLE: + case CONST_INT: + case LABEL_REF: + case CODE_LABEL: + default: + return 0; + } +} + +/* A C compound statement to output to stdio stream STREAM the + assembler syntax for an instruction operand that is a memory + reference whose address is ADDR. ADDR is an RTL expression. */ + +void +print_operand_address (FILE *file, rtx addr) +{ + rtx base; + rtx offset; + int need_parenthesis = 0; + + switch (GET_CODE (addr)) + { + case REG: + gcc_assert (REG_P (addr) && REG_OK_FOR_BASE_STRICT_P (addr)); + + fprintf (file, "0,"); + asm_print_register (file, REGNO (addr)); + break; + + case MEM: + base = XEXP (addr, 0); + switch (GET_CODE (base)) + { + case PRE_DEC: + gcc_assert (TARGET_M6812); + fprintf (file, "%u,-", GET_MODE_SIZE (GET_MODE (addr))); + asm_print_register (file, REGNO (XEXP (base, 0))); + break; + + case POST_DEC: + gcc_assert (TARGET_M6812); + fprintf (file, "%u,", GET_MODE_SIZE (GET_MODE (addr))); + asm_print_register (file, REGNO (XEXP (base, 0))); + fprintf (file, "-"); + break; + + case POST_INC: + gcc_assert (TARGET_M6812); + fprintf (file, "%u,", GET_MODE_SIZE (GET_MODE (addr))); + asm_print_register (file, REGNO (XEXP (base, 0))); + fprintf (file, "+"); + break; + + case PRE_INC: + gcc_assert (TARGET_M6812); + fprintf (file, "%u,+", GET_MODE_SIZE (GET_MODE (addr))); + asm_print_register (file, REGNO (XEXP (base, 0))); + break; + + default: + need_parenthesis = must_parenthesize (base); + if (need_parenthesis) + fprintf (file, "("); + + output_addr_const (file, base); + if (need_parenthesis) + fprintf (file, ")"); + break; + } + break; + + case PLUS: + base = XEXP (addr, 0); + offset = XEXP (addr, 1); + if (!G_REG_P (base) && G_REG_P (offset)) + { + base = XEXP (addr, 1); + offset = XEXP (addr, 0); + } + if (CONSTANT_ADDRESS_P (base)) + { + need_parenthesis = must_parenthesize (addr); + + gcc_assert (CONSTANT_ADDRESS_P (offset)); + if (need_parenthesis) + fprintf (file, "("); + + output_addr_const (file, base); + fprintf (file, "+"); + output_addr_const (file, offset); + if (need_parenthesis) + fprintf (file, ")"); + } + else + { + gcc_assert (REG_P (base) && REG_OK_FOR_BASE_STRICT_P (base)); + if (REG_P (offset)) + { + gcc_assert (TARGET_M6812); + asm_print_register (file, REGNO (offset)); + fprintf (file, ","); + asm_print_register (file, REGNO (base)); + } + else + { + need_parenthesis = must_parenthesize (offset); + if (need_parenthesis) + fprintf (file, "("); + + output_addr_const (file, offset); + if (need_parenthesis) + fprintf (file, ")"); + fprintf (file, ","); + asm_print_register (file, REGNO (base)); + } + } + break; + + default: + if (GET_CODE (addr) == CONST_INT + && INTVAL (addr) < 0x8000 && INTVAL (addr) >= -0x8000) + { + fprintf (file, HOST_WIDE_INT_PRINT_DEC, INTVAL (addr)); + } + else + { + need_parenthesis = must_parenthesize (addr); + if (need_parenthesis) + fprintf (file, "("); + + output_addr_const (file, addr); + if (need_parenthesis) + fprintf (file, ")"); + } + break; + } +} + + +/* Splitting of some instructions. */ + +static rtx +m68hc11_expand_compare (enum rtx_code code, rtx op0, rtx op1) +{ + rtx ret = 0; + + gcc_assert (GET_MODE_CLASS (GET_MODE (op0)) != MODE_FLOAT); + emit_insn (gen_rtx_SET (VOIDmode, cc0_rtx, + gen_rtx_COMPARE (VOIDmode, op0, op1))); + ret = gen_rtx_fmt_ee (code, VOIDmode, cc0_rtx, const0_rtx); + + return ret; +} + +rtx +m68hc11_expand_compare_and_branch (enum rtx_code code, rtx op0, rtx op1, + rtx label) +{ + rtx tmp; + + switch (GET_MODE (op0)) + { + case QImode: + case HImode: + tmp = m68hc11_expand_compare (code, op0, op1); + tmp = gen_rtx_IF_THEN_ELSE (VOIDmode, tmp, + gen_rtx_LABEL_REF (VOIDmode, label), + pc_rtx); + emit_jump_insn (gen_rtx_SET (VOIDmode, pc_rtx, tmp)); + return 0; +#if 0 + + /* SCz: from i386.c */ + case SFmode: + case DFmode: + /* Don't expand the comparison early, so that we get better code + when jump or whoever decides to reverse the comparison. */ + { + rtvec vec; + int use_fcomi; + + code = m68hc11_prepare_fp_compare_args (code, &m68hc11_compare_op0, + &m68hc11_compare_op1); + + tmp = gen_rtx_fmt_ee (code, m68hc11_fp_compare_mode (code), + m68hc11_compare_op0, m68hc11_compare_op1); + tmp = gen_rtx_IF_THEN_ELSE (VOIDmode, tmp, + gen_rtx_LABEL_REF (VOIDmode, label), + pc_rtx); + tmp = gen_rtx_SET (VOIDmode, pc_rtx, tmp); + + use_fcomi = ix86_use_fcomi_compare (code); + vec = rtvec_alloc (3 + !use_fcomi); + RTVEC_ELT (vec, 0) = tmp; + RTVEC_ELT (vec, 1) + = gen_rtx_CLOBBER (VOIDmode, gen_rtx_REG (CCFPmode, 18)); + RTVEC_ELT (vec, 2) + = gen_rtx_CLOBBER (VOIDmode, gen_rtx_REG (CCFPmode, 17)); + if (!use_fcomi) + RTVEC_ELT (vec, 3) + = gen_rtx_CLOBBER (VOIDmode, gen_rtx_SCRATCH (HImode)); + + emit_jump_insn (gen_rtx_PARALLEL (VOIDmode, vec)); + return; + } +#endif + + case SImode: + /* Expand SImode branch into multiple compare+branch. */ + { + rtx lo[2], hi[2], label2; + enum rtx_code code1, code2, code3; + + if (CONSTANT_P (op0) && !CONSTANT_P (op1)) + { + tmp = op0; + op0 = op1; + op1 = tmp; + code = swap_condition (code); + } + lo[0] = m68hc11_gen_lowpart (HImode, op0); + lo[1] = m68hc11_gen_lowpart (HImode, op1); + hi[0] = m68hc11_gen_highpart (HImode, op0); + hi[1] = m68hc11_gen_highpart (HImode, op1); + + /* Otherwise, if we are doing less-than, op1 is a constant and the + low word is zero, then we can just examine the high word. */ + + if (GET_CODE (hi[1]) == CONST_INT && lo[1] == const0_rtx + && (code == LT || code == LTU)) + { + return m68hc11_expand_compare_and_branch (code, hi[0], hi[1], + label); + } + + /* Otherwise, we need two or three jumps. */ + + label2 = gen_label_rtx (); + + code1 = code; + code2 = swap_condition (code); + code3 = unsigned_condition (code); + + switch (code) + { + case LT: + case GT: + case LTU: + case GTU: + break; + + case LE: + code1 = LT; + code2 = GT; + break; + case GE: + code1 = GT; + code2 = LT; + break; + case LEU: + code1 = LTU; + code2 = GTU; + break; + case GEU: + code1 = GTU; + code2 = LTU; + break; + + case EQ: + code1 = UNKNOWN; + code2 = NE; + break; + case NE: + code2 = UNKNOWN; + break; + + default: + gcc_unreachable (); + } + + /* + * a < b => + * if (hi(a) < hi(b)) goto true; + * if (hi(a) > hi(b)) goto false; + * if (lo(a) < lo(b)) goto true; + * false: + */ + if (code1 != UNKNOWN) + m68hc11_expand_compare_and_branch (code1, hi[0], hi[1], label); + if (code2 != UNKNOWN) + m68hc11_expand_compare_and_branch (code2, hi[0], hi[1], label2); + + m68hc11_expand_compare_and_branch (code3, lo[0], lo[1], label); + + if (code2 != UNKNOWN) + emit_label (label2); + return 0; + } + + default: + gcc_unreachable (); + } + return 0; +} + +/* Return the increment/decrement mode of a MEM if it is such. + Return CONST if it is anything else. */ +static int +autoinc_mode (rtx x) +{ + if (GET_CODE (x) != MEM) + return CONST; + + x = XEXP (x, 0); + if (GET_CODE (x) == PRE_INC + || GET_CODE (x) == PRE_DEC + || GET_CODE (x) == POST_INC + || GET_CODE (x) == POST_DEC) + return GET_CODE (x); + + return CONST; +} + +static int +m68hc11_make_autoinc_notes (rtx *x, void *data) +{ + rtx insn; + + switch (GET_CODE (*x)) + { + case PRE_DEC: + case PRE_INC: + case POST_DEC: + case POST_INC: + insn = (rtx) data; + REG_NOTES (insn) = alloc_EXPR_LIST (REG_INC, XEXP (*x, 0), + REG_NOTES (insn)); + return -1; + + default: + return 0; + } +} + +/* Split a DI, SI or HI move into several smaller move operations. + The scratch register 'scratch' is used as a temporary to load + store intermediate values. It must be a hard register. */ +void +m68hc11_split_move (rtx to, rtx from, rtx scratch) +{ + rtx low_to, low_from; + rtx high_to, high_from; + rtx insn; + enum machine_mode mode; + int offset = 0; + int autoinc_from = autoinc_mode (from); + int autoinc_to = autoinc_mode (to); + + mode = GET_MODE (to); + + /* If the TO and FROM contain autoinc modes that are not compatible + together (one pop and the other a push), we must change one to + an offsetable operand and generate an appropriate add at the end. */ + if (TARGET_M6812 && GET_MODE_SIZE (mode) > 2) + { + rtx reg; + int code; + + /* The source uses an autoinc mode which is not compatible with + a split (this would result in a word swap). */ + if (autoinc_from == PRE_INC || autoinc_from == POST_DEC) + { + code = GET_CODE (XEXP (from, 0)); + reg = XEXP (XEXP (from, 0), 0); + offset = GET_MODE_SIZE (GET_MODE (from)); + if (code == POST_DEC) + offset = -offset; + + if (code == PRE_INC) + emit_insn (gen_addhi3 (reg, reg, GEN_INT (offset))); + + m68hc11_split_move (to, gen_rtx_MEM (GET_MODE (from), reg), scratch); + if (code == POST_DEC) + emit_insn (gen_addhi3 (reg, reg, GEN_INT (offset))); + return; + } + + /* Likewise for destination. */ + if (autoinc_to == PRE_INC || autoinc_to == POST_DEC) + { + code = GET_CODE (XEXP (to, 0)); + reg = XEXP (XEXP (to, 0), 0); + offset = GET_MODE_SIZE (GET_MODE (to)); + if (code == POST_DEC) + offset = -offset; + + if (code == PRE_INC) + emit_insn (gen_addhi3 (reg, reg, GEN_INT (offset))); + + m68hc11_split_move (gen_rtx_MEM (GET_MODE (to), reg), from, scratch); + if (code == POST_DEC) + emit_insn (gen_addhi3 (reg, reg, GEN_INT (offset))); + return; + } + + /* The source and destination auto increment modes must be compatible + with each other: same direction. */ + if ((autoinc_to != autoinc_from + && autoinc_to != CONST && autoinc_from != CONST) + /* The destination address register must not be used within + the source operand because the source address would change + while doing the copy. */ + || (autoinc_to != CONST + && reg_mentioned_p (XEXP (XEXP (to, 0), 0), from) + && !IS_STACK_PUSH (to))) + { + /* Must change the destination. */ + code = GET_CODE (XEXP (to, 0)); + reg = XEXP (XEXP (to, 0), 0); + offset = GET_MODE_SIZE (GET_MODE (to)); + if (code == PRE_DEC || code == POST_DEC) + offset = -offset; + + if (code == PRE_DEC || code == PRE_INC) + emit_insn (gen_addhi3 (reg, reg, GEN_INT (offset))); + m68hc11_split_move (gen_rtx_MEM (GET_MODE (to), reg), from, scratch); + if (code == POST_DEC || code == POST_INC) + emit_insn (gen_addhi3 (reg, reg, GEN_INT (offset))); + + return; + } + + /* Likewise, the source address register must not be used within + the destination operand. */ + if (autoinc_from != CONST + && reg_mentioned_p (XEXP (XEXP (from, 0), 0), to) + && !IS_STACK_PUSH (to)) + { + /* Must change the source. */ + code = GET_CODE (XEXP (from, 0)); + reg = XEXP (XEXP (from, 0), 0); + offset = GET_MODE_SIZE (GET_MODE (from)); + if (code == PRE_DEC || code == POST_DEC) + offset = -offset; + + if (code == PRE_DEC || code == PRE_INC) + emit_insn (gen_addhi3 (reg, reg, GEN_INT (offset))); + m68hc11_split_move (to, gen_rtx_MEM (GET_MODE (from), reg), scratch); + if (code == POST_DEC || code == POST_INC) + emit_insn (gen_addhi3 (reg, reg, GEN_INT (offset))); + + return; + } + } + + if (GET_MODE_SIZE (mode) == 8) + mode = SImode; + else if (GET_MODE_SIZE (mode) == 4) + mode = HImode; + else + mode = QImode; + + if (TARGET_M6812 + && IS_STACK_PUSH (to) + && reg_mentioned_p (gen_rtx_REG (HImode, HARD_SP_REGNUM), from)) + { + if (mode == SImode) + { + offset = 4; + } + else if (mode == HImode) + { + offset = 2; + } + else + offset = 0; + } + + low_to = m68hc11_gen_lowpart (mode, to); + high_to = m68hc11_gen_highpart (mode, to); + + low_from = m68hc11_gen_lowpart (mode, from); + high_from = m68hc11_gen_highpart (mode, from); + + if (offset) + { + high_from = adjust_address (high_from, mode, offset); + low_from = high_from; + } + + /* When copying with a POST_INC mode, we must copy the + high part and then the low part to guarantee a correct + 32/64-bit copy. */ + if (TARGET_M6812 + && GET_MODE_SIZE (mode) >= 2 + && autoinc_from != autoinc_to + && (autoinc_from == POST_INC || autoinc_to == POST_INC)) + { + rtx swap; + + swap = low_to; + low_to = high_to; + high_to = swap; + + swap = low_from; + low_from = high_from; + high_from = swap; + } + if (mode == SImode) + { + m68hc11_split_move (low_to, low_from, scratch); + m68hc11_split_move (high_to, high_from, scratch); + } + else if (H_REG_P (to) || H_REG_P (from) + || (low_from == const0_rtx + && high_from == const0_rtx + && ! push_operand (to, GET_MODE (to)) + && ! H_REG_P (scratch)) + || (TARGET_M6812 + && (!m68hc11_register_indirect_p (from, GET_MODE (from)) + || m68hc11_small_indexed_indirect_p (from, + GET_MODE (from))) + && (!m68hc11_register_indirect_p (to, GET_MODE (to)) + || m68hc11_small_indexed_indirect_p (to, GET_MODE (to))))) + { + insn = emit_move_insn (low_to, low_from); + for_each_rtx (&PATTERN (insn), m68hc11_make_autoinc_notes, insn); + + insn = emit_move_insn (high_to, high_from); + for_each_rtx (&PATTERN (insn), m68hc11_make_autoinc_notes, insn); + } + else + { + insn = emit_move_insn (scratch, low_from); + for_each_rtx (&PATTERN (insn), m68hc11_make_autoinc_notes, insn); + insn = emit_move_insn (low_to, scratch); + for_each_rtx (&PATTERN (insn), m68hc11_make_autoinc_notes, insn); + + insn = emit_move_insn (scratch, high_from); + for_each_rtx (&PATTERN (insn), m68hc11_make_autoinc_notes, insn); + insn = emit_move_insn (high_to, scratch); + for_each_rtx (&PATTERN (insn), m68hc11_make_autoinc_notes, insn); + } +} + +static rtx +simplify_logical (enum machine_mode mode, int code, rtx operand, rtx *result) +{ + int val; + int mask; + + *result = 0; + if (GET_CODE (operand) != CONST_INT) + return operand; + + if (mode == HImode) + mask = 0x0ffff; + else + mask = 0x0ff; + + val = INTVAL (operand); + switch (code) + { + case IOR: + if ((val & mask) == 0) + return 0; + if ((val & mask) == mask) + *result = constm1_rtx; + break; + + case AND: + if ((val & mask) == 0) + *result = const0_rtx; + if ((val & mask) == mask) + return 0; + break; + + case XOR: + if ((val & mask) == 0) + return 0; + break; + } + return operand; +} + +static void +m68hc11_emit_logical (enum machine_mode mode, int code, rtx *operands) +{ + rtx result; + int need_copy; + + need_copy = (rtx_equal_p (operands[0], operands[1]) + || rtx_equal_p (operands[0], operands[2])) ? 0 : 1; + + operands[1] = simplify_logical (mode, code, operands[1], &result); + operands[2] = simplify_logical (mode, code, operands[2], &result); + + if (result && GET_CODE (result) == CONST_INT) + { + if (!H_REG_P (operands[0]) && operands[3] + && (INTVAL (result) != 0 || IS_STACK_PUSH (operands[0]))) + { + emit_move_insn (operands[3], result); + emit_move_insn (operands[0], operands[3]); + } + else + { + emit_move_insn (operands[0], result); + } + } + else if (operands[1] != 0 && operands[2] != 0) + { + rtx insn; + + if (!H_REG_P (operands[0]) && operands[3]) + { + emit_move_insn (operands[3], operands[1]); + emit_insn (gen_rtx_SET (mode, + operands[3], + gen_rtx_fmt_ee (code, mode, + operands[3], operands[2]))); + insn = emit_move_insn (operands[0], operands[3]); + } + else + { + insn = emit_insn (gen_rtx_SET (mode, + operands[0], + gen_rtx_fmt_ee (code, mode, + operands[0], + operands[2]))); + } + } + + /* The logical operation is similar to a copy. */ + else if (need_copy) + { + rtx src; + + if (GET_CODE (operands[1]) == CONST_INT) + src = operands[2]; + else + src = operands[1]; + + if (!H_REG_P (operands[0]) && !H_REG_P (src)) + { + emit_move_insn (operands[3], src); + emit_move_insn (operands[0], operands[3]); + } + else + { + emit_move_insn (operands[0], src); + } + } +} + +void +m68hc11_split_logical (enum machine_mode mode, int code, rtx *operands) +{ + rtx low[4]; + rtx high[4]; + + low[0] = m68hc11_gen_lowpart (mode, operands[0]); + low[1] = m68hc11_gen_lowpart (mode, operands[1]); + low[2] = m68hc11_gen_lowpart (mode, operands[2]); + + high[0] = m68hc11_gen_highpart (mode, operands[0]); + high[1] = m68hc11_gen_highpart (mode, operands[1]); + high[2] = m68hc11_gen_highpart (mode, operands[2]); + + low[3] = operands[3]; + high[3] = operands[3]; + if (mode == SImode) + { + m68hc11_split_logical (HImode, code, low); + m68hc11_split_logical (HImode, code, high); + return; + } + + m68hc11_emit_logical (mode, code, low); + m68hc11_emit_logical (mode, code, high); +} + + +/* Code generation. */ + +void +m68hc11_output_swap (rtx insn ATTRIBUTE_UNUSED, rtx operands[]) +{ + /* We have to be careful with the cc_status. An address register swap + is generated for some comparison. The comparison is made with D + but the branch really uses the address register. See the split + pattern for compare. The xgdx/xgdy preserve the flags but after + the exchange, the flags will reflect to the value of X and not D. + Tell this by setting the cc_status according to the cc_prev_status. */ + if (X_REG_P (operands[1]) || X_REG_P (operands[0])) + { + if (cc_prev_status.value1 != 0 + && (D_REG_P (cc_prev_status.value1) + || X_REG_P (cc_prev_status.value1))) + { + cc_status = cc_prev_status; + if (D_REG_P (cc_status.value1)) + cc_status.value1 = gen_rtx_REG (GET_MODE (cc_status.value1), + HARD_X_REGNUM); + else + cc_status.value1 = gen_rtx_REG (GET_MODE (cc_status.value1), + HARD_D_REGNUM); + } + else + CC_STATUS_INIT; + + output_asm_insn ("xgdx", operands); + } + else + { + if (cc_prev_status.value1 != 0 + && (D_REG_P (cc_prev_status.value1) + || Y_REG_P (cc_prev_status.value1))) + { + cc_status = cc_prev_status; + if (D_REG_P (cc_status.value1)) + cc_status.value1 = gen_rtx_REG (GET_MODE (cc_status.value1), + HARD_Y_REGNUM); + else + cc_status.value1 = gen_rtx_REG (GET_MODE (cc_status.value1), + HARD_D_REGNUM); + } + else + CC_STATUS_INIT; + + output_asm_insn ("xgdy", operands); + } +} + +/* Returns 1 if the next insn after 'insn' is a test of the register 'reg'. + This is used to decide whether a move that set flags should be used + instead. */ +int +next_insn_test_reg (rtx insn, rtx reg) +{ + rtx body; + + insn = next_nonnote_insn (insn); + if (GET_CODE (insn) != INSN) + return 0; + + body = PATTERN (insn); + if (sets_cc0_p (body) != 1) + return 0; + + if (rtx_equal_p (XEXP (body, 1), reg) == 0) + return 0; + + return 1; +} + +/* Generate the code to move a 16-bit operand into another one. */ + +void +m68hc11_gen_movhi (rtx insn, rtx *operands) +{ + int reg; + + /* Move a register or memory to the same location. + This is possible because such insn can appear + in a non-optimizing mode. */ + if (operands[0] == operands[1] || rtx_equal_p (operands[0], operands[1])) + { + cc_status = cc_prev_status; + return; + } + + if (TARGET_M6812) + { + rtx from = operands[1]; + rtx to = operands[0]; + + if (IS_STACK_PUSH (to) && H_REG_P (from)) + { + cc_status = cc_prev_status; + switch (REGNO (from)) + { + case HARD_X_REGNUM: + case HARD_Y_REGNUM: + case HARD_D_REGNUM: + output_asm_insn ("psh%1", operands); + break; + case HARD_SP_REGNUM: + output_asm_insn ("sts\t2,-sp", operands); + break; + default: + gcc_unreachable (); + } + return; + } + if (IS_STACK_POP (from) && H_REG_P (to)) + { + cc_status = cc_prev_status; + switch (REGNO (to)) + { + case HARD_X_REGNUM: + case HARD_Y_REGNUM: + case HARD_D_REGNUM: + output_asm_insn ("pul%0", operands); + break; + default: + gcc_unreachable (); + } + return; + } + if (H_REG_P (operands[0]) && H_REG_P (operands[1])) + { + m68hc11_notice_keep_cc (operands[0]); + output_asm_insn ("tfr\t%1,%0", operands); + } + else if (H_REG_P (operands[0])) + { + if (SP_REG_P (operands[0])) + output_asm_insn ("lds\t%1", operands); + else + output_asm_insn ("ld%0\t%1", operands); + } + else if (H_REG_P (operands[1])) + { + if (SP_REG_P (operands[1])) + output_asm_insn ("sts\t%0", operands); + else + output_asm_insn ("st%1\t%0", operands); + } + + /* The 68hc12 does not support (MEM:HI (MEM:HI)) with the movw + instruction. We have to use a scratch register as temporary location. + Trying to use a specific pattern or constrain failed. */ + else if (GET_CODE (to) == MEM && GET_CODE (XEXP (to, 0)) == MEM) + { + rtx ops[4]; + + ops[0] = to; + ops[2] = from; + ops[3] = 0; + if (dead_register_here (insn, d_reg)) + ops[1] = d_reg; + else if (dead_register_here (insn, ix_reg)) + ops[1] = ix_reg; + else if (dead_register_here (insn, iy_reg)) + ops[1] = iy_reg; + else + { + ops[1] = d_reg; + ops[3] = d_reg; + output_asm_insn ("psh%3", ops); + } + + ops[0] = to; + ops[2] = from; + output_asm_insn ("ld%1\t%2", ops); + output_asm_insn ("st%1\t%0", ops); + if (ops[3]) + output_asm_insn ("pul%3", ops); + } + + /* Use movw for non-null constants or when we are clearing + a volatile memory reference. However, this is possible + only if the memory reference has a small offset or is an + absolute address. */ + else if (GET_CODE (from) == CONST_INT + && INTVAL (from) == 0 + && (MEM_VOLATILE_P (to) == 0 + || m68hc11_small_indexed_indirect_p (to, HImode) == 0)) + { + output_asm_insn ("clr\t%h0", operands); + output_asm_insn ("clr\t%b0", operands); + } + else + { + if ((m68hc11_register_indirect_p (from, GET_MODE (from)) + && !m68hc11_small_indexed_indirect_p (from, GET_MODE (from))) + || (m68hc11_register_indirect_p (to, GET_MODE (to)) + && !m68hc11_small_indexed_indirect_p (to, GET_MODE (to)))) + { + rtx ops[3]; + + if (operands[2]) + { + ops[0] = operands[2]; + ops[1] = from; + ops[2] = 0; + m68hc11_gen_movhi (insn, ops); + ops[0] = to; + ops[1] = operands[2]; + m68hc11_gen_movhi (insn, ops); + return; + } + else + { + /* !!!! SCz wrong here. */ + fatal_insn ("move insn not handled", insn); + } + } + else + { + m68hc11_notice_keep_cc (operands[0]); + output_asm_insn ("movw\t%1,%0", operands); + } + } + return; + } + + if (IS_STACK_POP (operands[1]) && H_REG_P (operands[0])) + { + cc_status = cc_prev_status; + switch (REGNO (operands[0])) + { + case HARD_X_REGNUM: + case HARD_Y_REGNUM: + output_asm_insn ("pul%0", operands); + break; + case HARD_D_REGNUM: + output_asm_insn ("pula", operands); + output_asm_insn ("pulb", operands); + break; + default: + gcc_unreachable (); + } + return; + } + /* Some moves to a hard register are special. Not all of them + are really supported and we have to use a temporary + location to provide them (either the stack of a temp var). */ + if (H_REG_P (operands[0])) + { + switch (REGNO (operands[0])) + { + case HARD_D_REGNUM: + if (X_REG_P (operands[1])) + { + if (optimize && find_regno_note (insn, REG_DEAD, HARD_X_REGNUM)) + { + m68hc11_output_swap (insn, operands); + } + else if (next_insn_test_reg (insn, operands[0])) + { + output_asm_insn ("stx\t%t0\n\tldd\t%t0", operands); + } + else + { + m68hc11_notice_keep_cc (operands[0]); + output_asm_insn ("pshx\n\tpula\n\tpulb", operands); + } + } + else if (Y_REG_P (operands[1])) + { + if (optimize && find_regno_note (insn, REG_DEAD, HARD_Y_REGNUM)) + { + m68hc11_output_swap (insn, operands); + } + else + { + /* %t means *ZTMP scratch register. */ + output_asm_insn ("sty\t%t1", operands); + output_asm_insn ("ldd\t%t1", operands); + } + } + else if (SP_REG_P (operands[1])) + { + CC_STATUS_INIT; + if (ix_reg == 0) + create_regs_rtx (); + if (optimize == 0 || dead_register_here (insn, ix_reg) == 0) + output_asm_insn ("xgdx", operands); + output_asm_insn ("tsx", operands); + output_asm_insn ("xgdx", operands); + } + else if (IS_STACK_POP (operands[1])) + { + output_asm_insn ("pula\n\tpulb", operands); + } + else if (GET_CODE (operands[1]) == CONST_INT + && INTVAL (operands[1]) == 0) + { + output_asm_insn ("clra\n\tclrb", operands); + } + else + { + output_asm_insn ("ldd\t%1", operands); + } + break; + + case HARD_X_REGNUM: + if (D_REG_P (operands[1])) + { + if (optimize && find_regno_note (insn, REG_DEAD, HARD_D_REGNUM)) + { + m68hc11_output_swap (insn, operands); + } + else if (next_insn_test_reg (insn, operands[0])) + { + output_asm_insn ("std\t%t0\n\tldx\t%t0", operands); + } + else + { + m68hc11_notice_keep_cc (operands[0]); + output_asm_insn ("pshb", operands); + output_asm_insn ("psha", operands); + output_asm_insn ("pulx", operands); + } + } + else if (Y_REG_P (operands[1])) + { + /* When both D and Y are dead, use the sequence xgdy, xgdx + to move Y into X. The D and Y registers are modified. */ + if (optimize && find_regno_note (insn, REG_DEAD, HARD_Y_REGNUM) + && dead_register_here (insn, d_reg)) + { + output_asm_insn ("xgdy", operands); + output_asm_insn ("xgdx", operands); + CC_STATUS_INIT; + } + else if (!optimize_size) + { + output_asm_insn ("sty\t%t1", operands); + output_asm_insn ("ldx\t%t1", operands); + } + else + { + CC_STATUS_INIT; + output_asm_insn ("pshy", operands); + output_asm_insn ("pulx", operands); + } + } + else if (SP_REG_P (operands[1])) + { + /* tsx, tsy preserve the flags */ + cc_status = cc_prev_status; + output_asm_insn ("tsx", operands); + } + else + { + output_asm_insn ("ldx\t%1", operands); + } + break; + + case HARD_Y_REGNUM: + if (D_REG_P (operands[1])) + { + if (optimize && find_regno_note (insn, REG_DEAD, HARD_D_REGNUM)) + { + m68hc11_output_swap (insn, operands); + } + else + { + output_asm_insn ("std\t%t1", operands); + output_asm_insn ("ldy\t%t1", operands); + } + } + else if (X_REG_P (operands[1])) + { + /* When both D and X are dead, use the sequence xgdx, xgdy + to move X into Y. The D and X registers are modified. */ + if (optimize && find_regno_note (insn, REG_DEAD, HARD_X_REGNUM) + && dead_register_here (insn, d_reg)) + { + output_asm_insn ("xgdx", operands); + output_asm_insn ("xgdy", operands); + CC_STATUS_INIT; + } + else if (!optimize_size) + { + output_asm_insn ("stx\t%t1", operands); + output_asm_insn ("ldy\t%t1", operands); + } + else + { + CC_STATUS_INIT; + output_asm_insn ("pshx", operands); + output_asm_insn ("puly", operands); + } + } + else if (SP_REG_P (operands[1])) + { + /* tsx, tsy preserve the flags */ + cc_status = cc_prev_status; + output_asm_insn ("tsy", operands); + } + else + { + output_asm_insn ("ldy\t%1", operands); + } + break; + + case HARD_SP_REGNUM: + if (D_REG_P (operands[1])) + { + m68hc11_notice_keep_cc (operands[0]); + output_asm_insn ("xgdx", operands); + output_asm_insn ("txs", operands); + output_asm_insn ("xgdx", operands); + } + else if (X_REG_P (operands[1])) + { + /* tys, txs preserve the flags */ + cc_status = cc_prev_status; + output_asm_insn ("txs", operands); + } + else if (Y_REG_P (operands[1])) + { + /* tys, txs preserve the flags */ + cc_status = cc_prev_status; + output_asm_insn ("tys", operands); + } + else + { + /* lds sets the flags but the des does not. */ + CC_STATUS_INIT; + output_asm_insn ("lds\t%1", operands); + output_asm_insn ("des", operands); + } + break; + + default: + fatal_insn ("invalid register in the move instruction", insn); + break; + } + return; + } + if (SP_REG_P (operands[1]) && REG_P (operands[0]) + && REGNO (operands[0]) == HARD_FRAME_POINTER_REGNUM) + { + output_asm_insn ("sts\t%0", operands); + return; + } + + if (IS_STACK_PUSH (operands[0]) && H_REG_P (operands[1])) + { + cc_status = cc_prev_status; + switch (REGNO (operands[1])) + { + case HARD_X_REGNUM: + case HARD_Y_REGNUM: + output_asm_insn ("psh%1", operands); + break; + case HARD_D_REGNUM: + output_asm_insn ("pshb", operands); + output_asm_insn ("psha", operands); + break; + default: + gcc_unreachable (); + } + return; + } + + /* Operand 1 must be a hard register. */ + if (!H_REG_P (operands[1])) + { + fatal_insn ("invalid operand in the instruction", insn); + } + + reg = REGNO (operands[1]); + switch (reg) + { + case HARD_D_REGNUM: + output_asm_insn ("std\t%0", operands); + break; + + case HARD_X_REGNUM: + output_asm_insn ("stx\t%0", operands); + break; + + case HARD_Y_REGNUM: + output_asm_insn ("sty\t%0", operands); + break; + + case HARD_SP_REGNUM: + if (ix_reg == 0) + create_regs_rtx (); + + if (REG_P (operands[0]) && REGNO (operands[0]) == SOFT_TMP_REGNUM) + { + output_asm_insn ("pshx", operands); + output_asm_insn ("tsx", operands); + output_asm_insn ("inx", operands); + output_asm_insn ("inx", operands); + output_asm_insn ("stx\t%0", operands); + output_asm_insn ("pulx", operands); + } + + else if (reg_mentioned_p (ix_reg, operands[0])) + { + output_asm_insn ("sty\t%t0", operands); + output_asm_insn ("tsy", operands); + output_asm_insn ("sty\t%0", operands); + output_asm_insn ("ldy\t%t0", operands); + } + else + { + output_asm_insn ("stx\t%t0", operands); + output_asm_insn ("tsx", operands); + output_asm_insn ("stx\t%0", operands); + output_asm_insn ("ldx\t%t0", operands); + } + CC_STATUS_INIT; + break; + + default: + fatal_insn ("invalid register in the move instruction", insn); + break; + } +} + +void +m68hc11_gen_movqi (rtx insn, rtx *operands) +{ + /* Move a register or memory to the same location. + This is possible because such insn can appear + in a non-optimizing mode. */ + if (operands[0] == operands[1] || rtx_equal_p (operands[0], operands[1])) + { + cc_status = cc_prev_status; + return; + } + + if (TARGET_M6812) + { + + if (H_REG_P (operands[0]) && H_REG_P (operands[1])) + { + m68hc11_notice_keep_cc (operands[0]); + output_asm_insn ("tfr\t%1,%0", operands); + } + else if (H_REG_P (operands[0])) + { + if (IS_STACK_POP (operands[1])) + output_asm_insn ("pul%b0", operands); + else if (Q_REG_P (operands[0])) + output_asm_insn ("lda%0\t%b1", operands); + else if (D_REG_P (operands[0])) + output_asm_insn ("ldab\t%b1", operands); + else + goto m6811_move; + } + else if (H_REG_P (operands[1])) + { + if (Q_REG_P (operands[1])) + output_asm_insn ("sta%1\t%b0", operands); + else if (D_REG_P (operands[1])) + output_asm_insn ("stab\t%b0", operands); + else + goto m6811_move; + } + else + { + rtx from = operands[1]; + rtx to = operands[0]; + + if ((m68hc11_register_indirect_p (from, GET_MODE (from)) + && !m68hc11_small_indexed_indirect_p (from, GET_MODE (from))) + || (m68hc11_register_indirect_p (to, GET_MODE (to)) + && !m68hc11_small_indexed_indirect_p (to, GET_MODE (to)))) + { + rtx ops[3]; + + if (operands[2]) + { + ops[0] = operands[2]; + ops[1] = from; + ops[2] = 0; + m68hc11_gen_movqi (insn, ops); + ops[0] = to; + ops[1] = operands[2]; + m68hc11_gen_movqi (insn, ops); + } + else + { + /* !!!! SCz wrong here. */ + fatal_insn ("move insn not handled", insn); + } + } + else + { + if (GET_CODE (from) == CONST_INT && INTVAL (from) == 0) + { + output_asm_insn ("clr\t%b0", operands); + } + else + { + m68hc11_notice_keep_cc (operands[0]); + output_asm_insn ("movb\t%b1,%b0", operands); + } + } + } + return; + } + + m6811_move: + if (H_REG_P (operands[0])) + { + switch (REGNO (operands[0])) + { + case HARD_B_REGNUM: + case HARD_D_REGNUM: + if (X_REG_P (operands[1])) + { + if (optimize && find_regno_note (insn, REG_DEAD, HARD_X_REGNUM)) + { + m68hc11_output_swap (insn, operands); + } + else + { + output_asm_insn ("stx\t%t1", operands); + output_asm_insn ("ldab\t%T0", operands); + } + } + else if (Y_REG_P (operands[1])) + { + if (optimize && find_regno_note (insn, REG_DEAD, HARD_Y_REGNUM)) + { + m68hc11_output_swap (insn, operands); + } + else + { + output_asm_insn ("sty\t%t1", operands); + output_asm_insn ("ldab\t%T0", operands); + } + } + else if (!DB_REG_P (operands[1]) && !D_REG_P (operands[1]) + && !DA_REG_P (operands[1])) + { + output_asm_insn ("ldab\t%b1", operands); + } + else if (DA_REG_P (operands[1])) + { + output_asm_insn ("tab", operands); + } + else + { + cc_status = cc_prev_status; + return; + } + break; + + case HARD_A_REGNUM: + if (X_REG_P (operands[1])) + { + output_asm_insn ("stx\t%t1", operands); + output_asm_insn ("ldaa\t%T0", operands); + } + else if (Y_REG_P (operands[1])) + { + output_asm_insn ("sty\t%t1", operands); + output_asm_insn ("ldaa\t%T0", operands); + } + else if (!DB_REG_P (operands[1]) && !D_REG_P (operands[1]) + && !DA_REG_P (operands[1])) + { + output_asm_insn ("ldaa\t%b1", operands); + } + else if (!DA_REG_P (operands[1])) + { + output_asm_insn ("tba", operands); + } + else + { + cc_status = cc_prev_status; + } + break; + + case HARD_X_REGNUM: + if (D_REG_P (operands[1])) + { + if (optimize && find_regno_note (insn, REG_DEAD, HARD_D_REGNUM)) + { + m68hc11_output_swap (insn, operands); + } + else + { + output_asm_insn ("stab\t%T1", operands); + output_asm_insn ("ldx\t%t1", operands); + } + CC_STATUS_INIT; + } + else if (Y_REG_P (operands[1])) + { + output_asm_insn ("sty\t%t0", operands); + output_asm_insn ("ldx\t%t0", operands); + } + else if (GET_CODE (operands[1]) == CONST_INT) + { + output_asm_insn ("ldx\t%1", operands); + } + else if (dead_register_here (insn, d_reg)) + { + output_asm_insn ("ldab\t%b1", operands); + output_asm_insn ("xgdx", operands); + } + else if (!reg_mentioned_p (operands[0], operands[1])) + { + output_asm_insn ("xgdx", operands); + output_asm_insn ("ldab\t%b1", operands); + output_asm_insn ("xgdx", operands); + } + else + { + output_asm_insn ("pshb", operands); + output_asm_insn ("ldab\t%b1", operands); + output_asm_insn ("stab\t%T1", operands); + output_asm_insn ("ldx\t%t1", operands); + output_asm_insn ("pulb", operands); + CC_STATUS_INIT; + } + break; + + case HARD_Y_REGNUM: + if (D_REG_P (operands[1])) + { + output_asm_insn ("stab\t%T1", operands); + output_asm_insn ("ldy\t%t1", operands); + CC_STATUS_INIT; + } + else if (X_REG_P (operands[1])) + { + output_asm_insn ("stx\t%t1", operands); + output_asm_insn ("ldy\t%t1", operands); + CC_STATUS_INIT; + } + else if (GET_CODE (operands[1]) == CONST_INT) + { + output_asm_insn ("ldy\t%1", operands); + } + else if (dead_register_here (insn, d_reg)) + { + output_asm_insn ("ldab\t%b1", operands); + output_asm_insn ("xgdy", operands); + } + else if (!reg_mentioned_p (operands[0], operands[1])) + { + output_asm_insn ("xgdy", operands); + output_asm_insn ("ldab\t%b1", operands); + output_asm_insn ("xgdy", operands); + } + else + { + output_asm_insn ("pshb", operands); + output_asm_insn ("ldab\t%b1", operands); + output_asm_insn ("stab\t%T1", operands); + output_asm_insn ("ldy\t%t1", operands); + output_asm_insn ("pulb", operands); + CC_STATUS_INIT; + } + break; + + default: + fatal_insn ("invalid register in the instruction", insn); + break; + } + } + else if (H_REG_P (operands[1])) + { + switch (REGNO (operands[1])) + { + case HARD_D_REGNUM: + case HARD_B_REGNUM: + output_asm_insn ("stab\t%b0", operands); + break; + + case HARD_A_REGNUM: + output_asm_insn ("staa\t%b0", operands); + break; + + case HARD_X_REGNUM: + output_asm_insn ("xgdx\n\tstab\t%b0\n\txgdx", operands); + break; + + case HARD_Y_REGNUM: + output_asm_insn ("xgdy\n\tstab\t%b0\n\txgdy", operands); + break; + + default: + fatal_insn ("invalid register in the move instruction", insn); + break; + } + return; + } + else + { + fatal_insn ("operand 1 must be a hard register", insn); + } +} + +/* Generate the code for a ROTATE or ROTATERT on a QI or HI mode. + The source and destination must be D or A and the shift must + be a constant. */ +void +m68hc11_gen_rotate (enum rtx_code code, rtx insn, rtx operands[]) +{ + int val; + + if (GET_CODE (operands[2]) != CONST_INT + || (!D_REG_P (operands[0]) && !DA_REG_P (operands[0]))) + fatal_insn ("invalid rotate insn", insn); + + val = INTVAL (operands[2]); + if (code == ROTATERT) + val = GET_MODE_SIZE (GET_MODE (operands[0])) * BITS_PER_UNIT - val; + + if (GET_MODE (operands[0]) != QImode) + CC_STATUS_INIT; + + /* Rotate by 8-bits if the shift is within [5..11]. */ + if (val >= 5 && val <= 11) + { + if (TARGET_M6812) + output_asm_insn ("exg\ta,b", operands); + else + { + output_asm_insn ("psha", operands); + output_asm_insn ("tba", operands); + output_asm_insn ("pulb", operands); + } + val -= 8; + } + + /* If the shift is big, invert the rotation. */ + else if (val >= 12) + { + val = val - 16; + } + + if (val > 0) + { + while (--val >= 0) + { + /* Set the carry to bit-15, but don't change D yet. */ + if (GET_MODE (operands[0]) != QImode) + { + output_asm_insn ("asra", operands); + output_asm_insn ("rola", operands); + } + + /* Rotate B first to move the carry to bit-0. */ + if (D_REG_P (operands[0])) + output_asm_insn ("rolb", operands); + + if (GET_MODE (operands[0]) != QImode || DA_REG_P (operands[0])) + output_asm_insn ("rola", operands); + } + } + else + { + while (++val <= 0) + { + /* Set the carry to bit-8 of D. */ + if (GET_MODE (operands[0]) != QImode) + output_asm_insn ("tap", operands); + + /* Rotate B first to move the carry to bit-7. */ + if (D_REG_P (operands[0])) + output_asm_insn ("rorb", operands); + + if (GET_MODE (operands[0]) != QImode || DA_REG_P (operands[0])) + output_asm_insn ("rora", operands); + } + } +} + + + +/* Store in cc_status the expressions that the condition codes will + describe after execution of an instruction whose pattern is EXP. + Do not alter them if the instruction would not alter the cc's. */ + +void +m68hc11_notice_update_cc (rtx exp, rtx insn ATTRIBUTE_UNUSED) +{ + /* recognize SET insn's. */ + if (GET_CODE (exp) == SET) + { + /* Jumps do not alter the cc's. */ + if (SET_DEST (exp) == pc_rtx) + ; + + /* NOTE: most instructions don't affect the carry bit, but the + bhi/bls/bhs/blo instructions use it. This isn't mentioned in + the conditions.h header. */ + + /* Function calls clobber the cc's. */ + else if (GET_CODE (SET_SRC (exp)) == CALL) + { + CC_STATUS_INIT; + } + + /* Tests and compares set the cc's in predictable ways. */ + else if (SET_DEST (exp) == cc0_rtx) + { + cc_status.flags = 0; + cc_status.value1 = XEXP (exp, 0); + cc_status.value2 = XEXP (exp, 1); + } + else + { + /* All other instructions affect the condition codes. */ + cc_status.flags = 0; + cc_status.value1 = XEXP (exp, 0); + cc_status.value2 = XEXP (exp, 1); + } + } + else + { + /* Default action if we haven't recognized something + and returned earlier. */ + CC_STATUS_INIT; + } + + if (cc_status.value2 != 0) + switch (GET_CODE (cc_status.value2)) + { + /* These logical operations can generate several insns. + The flags are setup according to what is generated. */ + case IOR: + case XOR: + case AND: + break; + + /* The (not ...) generates several 'com' instructions for + non QImode. We have to invalidate the flags. */ + case NOT: + if (GET_MODE (cc_status.value2) != QImode) + CC_STATUS_INIT; + break; + + case PLUS: + case MINUS: + case MULT: + case DIV: + case UDIV: + case MOD: + case UMOD: + case NEG: + if (GET_MODE (cc_status.value2) != VOIDmode) + cc_status.flags |= CC_NO_OVERFLOW; + break; + + /* The asl sets the overflow bit in such a way that this + makes the flags unusable for a next compare insn. */ + case ASHIFT: + case ROTATE: + case ROTATERT: + if (GET_MODE (cc_status.value2) != VOIDmode) + cc_status.flags |= CC_NO_OVERFLOW; + break; + + /* A load/store instruction does not affect the carry. */ + case MEM: + case SYMBOL_REF: + case REG: + case CONST_INT: + cc_status.flags |= CC_NO_OVERFLOW; + break; + + default: + break; + } + if (cc_status.value1 && GET_CODE (cc_status.value1) == REG + && cc_status.value2 + && reg_overlap_mentioned_p (cc_status.value1, cc_status.value2)) + cc_status.value2 = 0; + + else if (cc_status.value1 && side_effects_p (cc_status.value1)) + cc_status.value1 = 0; + + else if (cc_status.value2 && side_effects_p (cc_status.value2)) + cc_status.value2 = 0; +} + +/* The current instruction does not affect the flags but changes + the register 'reg'. See if the previous flags can be kept for the + next instruction to avoid a comparison. */ +void +m68hc11_notice_keep_cc (rtx reg) +{ + if (reg == 0 + || cc_prev_status.value1 == 0 + || rtx_equal_p (reg, cc_prev_status.value1) + || (cc_prev_status.value2 + && reg_mentioned_p (reg, cc_prev_status.value2))) + CC_STATUS_INIT; + else + cc_status = cc_prev_status; +} + + + +/* Machine Specific Reorg. */ + +/* Z register replacement: + + GCC treats the Z register as an index base address register like + X or Y. In general, it uses it during reload to compute the address + of some operand. This helps the reload pass to avoid to fall into the + register spill failure. + + The Z register is in the A_REGS class. In the machine description, + the 'A' constraint matches it. The 'x' or 'y' constraints do not. + + It can appear everywhere an X or Y register can appear, except for + some templates in the clobber section (when a clobber of X or Y is asked). + For a given instruction, the template must ensure that no more than + 2 'A' registers are used. Otherwise, the register replacement is not + possible. + + To replace the Z register, the algorithm is not terrific: + 1. Insns that do not use the Z register are not changed + 2. When a Z register is used, we scan forward the insns to see + a potential register to use: either X or Y and sometimes D. + We stop when a call, a label or a branch is seen, or when we + detect that both X and Y are used (probably at different times, but it does + not matter). + 3. The register that will be used for the replacement of Z is saved + in a .page0 register or on the stack. If the first instruction that + used Z, uses Z as an input, the value is loaded from another .page0 + register. The replacement register is pushed on the stack in the + rare cases where a compare insn uses Z and we couldn't find if X/Y + are dead. + 4. The Z register is replaced in all instructions until we reach + the end of the Z-block, as detected by step 2. + 5. If we detect that Z is still alive, its value is saved. + If the replacement register is alive, its old value is loaded. + + The Z register can be disabled with -ffixed-z. +*/ + +struct replace_info +{ + rtx first; + rtx replace_reg; + int need_save_z; + int must_load_z; + int must_save_reg; + int must_restore_reg; + rtx last; + int regno; + int x_used; + int y_used; + int can_use_d; + int found_call; + int z_died; + int z_set_count; + rtx z_value; + int must_push_reg; + int save_before_last; + int z_loaded_with_sp; +}; + +static int m68hc11_check_z_replacement (rtx, struct replace_info *); +static void m68hc11_find_z_replacement (rtx, struct replace_info *); +static void m68hc11_z_replacement (rtx); +static void m68hc11_reassign_regs (rtx); + +int z_replacement_completed = 0; + +/* Analyze the insn to find out which replacement register to use and + the boundaries of the replacement. + Returns 0 if we reached the last insn to be replaced, 1 if we can + continue replacement in next insns. */ + +static int +m68hc11_check_z_replacement (rtx insn, struct replace_info *info) +{ + int this_insn_uses_ix; + int this_insn_uses_iy; + int this_insn_uses_z; + int this_insn_uses_z_in_dst; + int this_insn_uses_d; + rtx body; + int z_dies_here; + + /* A call is said to clobber the Z register, we don't need + to save the value of Z. We also don't need to restore + the replacement register (unless it is used by the call). */ + if (GET_CODE (insn) == CALL_INSN) + { + body = PATTERN (insn); + + info->can_use_d = 0; + + /* If the call is an indirect call with Z, we have to use the + Y register because X can be used as an input (D+X). + We also must not save Z nor restore Y. */ + if (reg_mentioned_p (z_reg, body)) + { + insn = NEXT_INSN (insn); + info->x_used = 1; + info->y_used = 0; + info->found_call = 1; + info->must_restore_reg = 0; + info->last = NEXT_INSN (insn); + } + info->need_save_z = 0; + return 0; + } + if (GET_CODE (insn) == CODE_LABEL + || GET_CODE (insn) == BARRIER || GET_CODE (insn) == ASM_INPUT) + return 0; + + if (GET_CODE (insn) == JUMP_INSN) + { + if (reg_mentioned_p (z_reg, insn) == 0) + return 0; + + info->can_use_d = 0; + info->must_save_reg = 0; + info->must_restore_reg = 0; + info->need_save_z = 0; + info->last = NEXT_INSN (insn); + return 0; + } + if (GET_CODE (insn) != INSN && GET_CODE (insn) != JUMP_INSN) + { + return 1; + } + + /* Z register dies here. */ + z_dies_here = find_regno_note (insn, REG_DEAD, HARD_Z_REGNUM) != NULL; + + body = PATTERN (insn); + if (GET_CODE (body) == SET) + { + rtx src = XEXP (body, 1); + rtx dst = XEXP (body, 0); + + /* Condition code is set here. We have to restore the X/Y and + save into Z before any test/compare insn because once we save/restore + we can change the condition codes. When the compare insn uses Z and + we can't use X/Y, the comparison is made with the *ZREG soft register + (this is supported by cmphi, cmpqi, tsthi, tstqi patterns). */ + if (dst == cc0_rtx) + { + if ((GET_CODE (src) == REG && REGNO (src) == HARD_Z_REGNUM) + || (GET_CODE (src) == COMPARE && + ((rtx_equal_p (XEXP (src, 0), z_reg) + && H_REG_P (XEXP (src, 1))) + || (rtx_equal_p (XEXP (src, 1), z_reg) + && H_REG_P (XEXP (src, 0)))))) + { + if (insn == info->first) + { + info->must_load_z = 0; + info->must_save_reg = 0; + info->must_restore_reg = 0; + info->need_save_z = 0; + info->found_call = 1; + info->regno = SOFT_Z_REGNUM; + info->last = NEXT_INSN (insn); + } + return 0; + } + if (reg_mentioned_p (z_reg, src) == 0) + { + info->can_use_d = 0; + return 0; + } + + if (insn != info->first) + return 0; + + /* Compare insn which uses Z. We have to save/restore the X/Y + register without modifying the condition codes. For this + we have to use a push/pop insn. */ + info->must_push_reg = 1; + info->last = insn; + } + + /* Z reg is set to something new. We don't need to load it. */ + if (Z_REG_P (dst)) + { + if (!reg_mentioned_p (z_reg, src)) + { + /* Z reg is used before being set. Treat this as + a new sequence of Z register replacement. */ + if (insn != info->first) + { + return 0; + } + info->must_load_z = 0; + } + info->z_set_count++; + info->z_value = src; + if (SP_REG_P (src)) + info->z_loaded_with_sp = 1; + } + else if (reg_mentioned_p (z_reg, dst)) + info->can_use_d = 0; + + this_insn_uses_d = reg_mentioned_p (d_reg, src) + | reg_mentioned_p (d_reg, dst); + this_insn_uses_ix = reg_mentioned_p (ix_reg, src) + | reg_mentioned_p (ix_reg, dst); + this_insn_uses_iy = reg_mentioned_p (iy_reg, src) + | reg_mentioned_p (iy_reg, dst); + this_insn_uses_z = reg_mentioned_p (z_reg, src); + + /* If z is used as an address operand (like (MEM (reg z))), + we can't replace it with d. */ + if (this_insn_uses_z && !Z_REG_P (src) + && !(m68hc11_arith_operator (src, GET_MODE (src)) + && Z_REG_P (XEXP (src, 0)) + && !reg_mentioned_p (z_reg, XEXP (src, 1)) + && insn == info->first + && dead_register_here (insn, d_reg))) + info->can_use_d = 0; + + this_insn_uses_z_in_dst = reg_mentioned_p (z_reg, dst); + if (TARGET_M6812 && !z_dies_here + && ((this_insn_uses_z && side_effects_p (src)) + || (this_insn_uses_z_in_dst && side_effects_p (dst)))) + { + info->need_save_z = 1; + info->z_set_count++; + } + this_insn_uses_z |= this_insn_uses_z_in_dst; + + if (this_insn_uses_z && this_insn_uses_ix && this_insn_uses_iy) + { + fatal_insn ("registers IX, IY and Z used in the same INSN", insn); + } + + if (this_insn_uses_d) + info->can_use_d = 0; + + /* IX and IY are used at the same time, we have to restore + the value of the scratch register before this insn. */ + if (this_insn_uses_ix && this_insn_uses_iy) + { + return 0; + } + + if (this_insn_uses_ix && X_REG_P (dst) && GET_MODE (dst) == SImode) + info->can_use_d = 0; + + if (info->x_used == 0 && this_insn_uses_ix) + { + if (info->y_used) + { + /* We have a (set (REG:HI X) (REG:HI Z)). + Since we use Z as the replacement register, this insn + is no longer necessary. We turn it into a note. We must + not reload the old value of X. */ + if (X_REG_P (dst) && rtx_equal_p (src, z_reg)) + { + if (z_dies_here) + { + info->need_save_z = 0; + info->z_died = 1; + } + info->must_save_reg = 0; + info->must_restore_reg = 0; + info->found_call = 1; + info->can_use_d = 0; + SET_INSN_DELETED (insn); + info->last = NEXT_INSN (insn); + return 0; + } + + if (X_REG_P (dst) + && (rtx_equal_p (src, z_reg) + || (z_dies_here && !reg_mentioned_p (ix_reg, src)))) + { + if (z_dies_here) + { + info->need_save_z = 0; + info->z_died = 1; + } + info->last = NEXT_INSN (insn); + info->must_save_reg = 0; + info->must_restore_reg = 0; + } + else if (X_REG_P (dst) && reg_mentioned_p (z_reg, src) + && !reg_mentioned_p (ix_reg, src)) + { + if (z_dies_here) + { + info->z_died = 1; + info->need_save_z = 0; + } + else if (TARGET_M6812 && side_effects_p (src)) + { + info->last = 0; + info->must_restore_reg = 0; + return 0; + } + else + { + info->save_before_last = 1; + } + info->must_restore_reg = 0; + info->last = NEXT_INSN (insn); + } + else if (info->can_use_d) + { + info->last = NEXT_INSN (insn); + info->x_used = 1; + } + return 0; + } + info->x_used = 1; + if (z_dies_here && !reg_mentioned_p (ix_reg, src) + && GET_CODE (dst) == REG && REGNO (dst) == HARD_X_REGNUM) + { + info->need_save_z = 0; + info->z_died = 1; + info->last = NEXT_INSN (insn); + info->regno = HARD_X_REGNUM; + info->must_save_reg = 0; + info->must_restore_reg = 0; + return 0; + } + if (rtx_equal_p (src, z_reg) && rtx_equal_p (dst, ix_reg)) + { + info->regno = HARD_X_REGNUM; + info->must_restore_reg = 0; + info->must_save_reg = 0; + return 0; + } + } + if (info->y_used == 0 && this_insn_uses_iy) + { + if (info->x_used) + { + if (Y_REG_P (dst) && rtx_equal_p (src, z_reg)) + { + if (z_dies_here) + { + info->need_save_z = 0; + info->z_died = 1; + } + info->must_save_reg = 0; + info->must_restore_reg = 0; + info->found_call = 1; + info->can_use_d = 0; + SET_INSN_DELETED (insn); + info->last = NEXT_INSN (insn); + return 0; + } + + if (Y_REG_P (dst) + && (rtx_equal_p (src, z_reg) + || (z_dies_here && !reg_mentioned_p (iy_reg, src)))) + { + if (z_dies_here) + { + info->z_died = 1; + info->need_save_z = 0; + } + info->last = NEXT_INSN (insn); + info->must_save_reg = 0; + info->must_restore_reg = 0; + } + else if (Y_REG_P (dst) && reg_mentioned_p (z_reg, src) + && !reg_mentioned_p (iy_reg, src)) + { + if (z_dies_here) + { + info->z_died = 1; + info->need_save_z = 0; + } + else if (TARGET_M6812 && side_effects_p (src)) + { + info->last = 0; + info->must_restore_reg = 0; + return 0; + } + else + { + info->save_before_last = 1; + } + info->must_restore_reg = 0; + info->last = NEXT_INSN (insn); + } + else if (info->can_use_d) + { + info->last = NEXT_INSN (insn); + info->y_used = 1; + } + + return 0; + } + info->y_used = 1; + if (z_dies_here && !reg_mentioned_p (iy_reg, src) + && GET_CODE (dst) == REG && REGNO (dst) == HARD_Y_REGNUM) + { + info->need_save_z = 0; + info->z_died = 1; + info->last = NEXT_INSN (insn); + info->regno = HARD_Y_REGNUM; + info->must_save_reg = 0; + info->must_restore_reg = 0; + return 0; + } + if (rtx_equal_p (src, z_reg) && rtx_equal_p (dst, iy_reg)) + { + info->regno = HARD_Y_REGNUM; + info->must_restore_reg = 0; + info->must_save_reg = 0; + return 0; + } + } + if (z_dies_here) + { + info->need_save_z = 0; + info->z_died = 1; + if (info->last == 0) + info->last = NEXT_INSN (insn); + return 0; + } + return info->last != NULL_RTX ? 0 : 1; + } + if (GET_CODE (body) == PARALLEL) + { + int i; + char ix_clobber = 0; + char iy_clobber = 0; + char z_clobber = 0; + this_insn_uses_iy = 0; + this_insn_uses_ix = 0; + this_insn_uses_z = 0; + + for (i = XVECLEN (body, 0) - 1; i >= 0; i--) + { + rtx x; + int uses_ix, uses_iy, uses_z; + + x = XVECEXP (body, 0, i); + + if (info->can_use_d && reg_mentioned_p (d_reg, x)) + info->can_use_d = 0; + + uses_ix = reg_mentioned_p (ix_reg, x); + uses_iy = reg_mentioned_p (iy_reg, x); + uses_z = reg_mentioned_p (z_reg, x); + if (GET_CODE (x) == CLOBBER) + { + ix_clobber |= uses_ix; + iy_clobber |= uses_iy; + z_clobber |= uses_z; + } + else + { + this_insn_uses_ix |= uses_ix; + this_insn_uses_iy |= uses_iy; + this_insn_uses_z |= uses_z; + } + if (uses_z && GET_CODE (x) == SET) + { + rtx dst = XEXP (x, 0); + + if (Z_REG_P (dst)) + info->z_set_count++; + } + if (TARGET_M6812 && uses_z && side_effects_p (x)) + info->need_save_z = 1; + + if (z_clobber) + info->need_save_z = 0; + } + if (debug_m6811) + { + printf ("Uses X:%d Y:%d Z:%d CX:%d CY:%d CZ:%d\n", + this_insn_uses_ix, this_insn_uses_iy, + this_insn_uses_z, ix_clobber, iy_clobber, z_clobber); + debug_rtx (insn); + } + if (this_insn_uses_z) + info->can_use_d = 0; + + if (z_clobber && info->first != insn) + { + info->need_save_z = 0; + info->last = insn; + return 0; + } + if (z_clobber && info->x_used == 0 && info->y_used == 0) + { + if (this_insn_uses_z == 0 && insn == info->first) + { + info->must_load_z = 0; + } + if (dead_register_here (insn, d_reg)) + { + info->regno = HARD_D_REGNUM; + info->must_save_reg = 0; + info->must_restore_reg = 0; + } + else if (dead_register_here (insn, ix_reg)) + { + info->regno = HARD_X_REGNUM; + info->must_save_reg = 0; + info->must_restore_reg = 0; + } + else if (dead_register_here (insn, iy_reg)) + { + info->regno = HARD_Y_REGNUM; + info->must_save_reg = 0; + info->must_restore_reg = 0; + } + if (info->regno >= 0) + { + info->last = NEXT_INSN (insn); + return 0; + } + if (this_insn_uses_ix == 0) + { + info->regno = HARD_X_REGNUM; + info->must_save_reg = 1; + info->must_restore_reg = 1; + } + else if (this_insn_uses_iy == 0) + { + info->regno = HARD_Y_REGNUM; + info->must_save_reg = 1; + info->must_restore_reg = 1; + } + else + { + info->regno = HARD_D_REGNUM; + info->must_save_reg = 1; + info->must_restore_reg = 1; + } + info->last = NEXT_INSN (insn); + return 0; + } + + if (((info->x_used || this_insn_uses_ix) && iy_clobber) + || ((info->y_used || this_insn_uses_iy) && ix_clobber)) + { + if (this_insn_uses_z) + { + if (info->y_used == 0 && iy_clobber) + { + info->regno = HARD_Y_REGNUM; + info->must_save_reg = 0; + info->must_restore_reg = 0; + } + if (info->first != insn + && ((info->y_used && ix_clobber) + || (info->x_used && iy_clobber))) + info->last = insn; + else + info->last = NEXT_INSN (insn); + info->save_before_last = 1; + } + return 0; + } + if (this_insn_uses_ix && this_insn_uses_iy) + { + if (this_insn_uses_z) + { + fatal_insn ("cannot do z-register replacement", insn); + } + return 0; + } + if (info->x_used == 0 && (this_insn_uses_ix || ix_clobber)) + { + if (info->y_used) + { + return 0; + } + info->x_used = 1; + if (iy_clobber || z_clobber) + { + info->last = NEXT_INSN (insn); + info->save_before_last = 1; + return 0; + } + } + + if (info->y_used == 0 && (this_insn_uses_iy || iy_clobber)) + { + if (info->x_used) + { + return 0; + } + info->y_used = 1; + if (ix_clobber || z_clobber) + { + info->last = NEXT_INSN (insn); + info->save_before_last = 1; + return 0; + } + } + if (z_dies_here) + { + info->z_died = 1; + info->need_save_z = 0; + } + return 1; + } + if (GET_CODE (body) == CLOBBER) + { + + /* IX and IY are used at the same time, we have to restore + the value of the scratch register before this insn. */ + if (this_insn_uses_ix && this_insn_uses_iy) + { + return 0; + } + if (info->x_used == 0 && this_insn_uses_ix) + { + if (info->y_used) + { + return 0; + } + info->x_used = 1; + } + if (info->y_used == 0 && this_insn_uses_iy) + { + if (info->x_used) + { + return 0; + } + info->y_used = 1; + } + return 1; + } + return 1; +} + +static void +m68hc11_find_z_replacement (rtx insn, struct replace_info *info) +{ + int reg; + + info->replace_reg = NULL_RTX; + info->must_load_z = 1; + info->need_save_z = 1; + info->must_save_reg = 1; + info->must_restore_reg = 1; + info->first = insn; + info->x_used = 0; + info->y_used = 0; + info->can_use_d = TARGET_M6811 ? 1 : 0; + info->found_call = 0; + info->z_died = 0; + info->last = 0; + info->regno = -1; + info->z_set_count = 0; + info->z_value = NULL_RTX; + info->must_push_reg = 0; + info->save_before_last = 0; + info->z_loaded_with_sp = 0; + + /* Scan the insn forward to find an address register that is not used. + Stop when: + - the flow of the program changes, + - when we detect that both X and Y are necessary, + - when the Z register dies, + - when the condition codes are set. */ + + for (; insn && info->z_died == 0; insn = NEXT_INSN (insn)) + { + if (m68hc11_check_z_replacement (insn, info) == 0) + break; + } + + /* May be we can use Y or X if they contain the same value as Z. + This happens very often after the reload. */ + if (info->z_set_count == 1) + { + rtx p = info->first; + rtx v = 0; + + if (info->x_used) + { + v = find_last_value (iy_reg, &p, insn, 1); + } + else if (info->y_used) + { + v = find_last_value (ix_reg, &p, insn, 1); + } + if (v && (v != iy_reg && v != ix_reg) && rtx_equal_p (v, info->z_value)) + { + if (info->x_used) + info->regno = HARD_Y_REGNUM; + else + info->regno = HARD_X_REGNUM; + info->must_load_z = 0; + info->must_save_reg = 0; + info->must_restore_reg = 0; + info->found_call = 1; + } + } + if (info->z_set_count == 0) + info->need_save_z = 0; + + if (insn == 0) + info->need_save_z = 0; + + if (info->last == 0) + info->last = insn; + + if (info->regno >= 0) + { + reg = info->regno; + info->replace_reg = gen_rtx_REG (HImode, reg); + } + else if (info->can_use_d) + { + reg = HARD_D_REGNUM; + info->replace_reg = d_reg; + } + else if (info->x_used) + { + reg = HARD_Y_REGNUM; + info->replace_reg = iy_reg; + } + else + { + reg = HARD_X_REGNUM; + info->replace_reg = ix_reg; + } + info->regno = reg; + + if (info->must_save_reg && info->must_restore_reg) + { + if (insn && dead_register_here (insn, info->replace_reg)) + { + info->must_save_reg = 0; + info->must_restore_reg = 0; + } + } +} + +/* The insn uses the Z register. Find a replacement register for it + (either X or Y) and replace it in the insn and the next ones until + the flow changes or the replacement register is used. Instructions + are emitted before and after the Z-block to preserve the value of + Z and of the replacement register. */ + +static void +m68hc11_z_replacement (rtx insn) +{ + rtx replace_reg_qi; + rtx replace_reg; + struct replace_info info; + + /* Find trivial case where we only need to replace z with the + equivalent soft register. */ + if (GET_CODE (insn) == INSN && GET_CODE (PATTERN (insn)) == SET) + { + rtx body = PATTERN (insn); + rtx src = XEXP (body, 1); + rtx dst = XEXP (body, 0); + + if (Z_REG_P (dst) && (H_REG_P (src) && !SP_REG_P (src))) + { + XEXP (body, 0) = gen_rtx_REG (GET_MODE (dst), SOFT_Z_REGNUM); + return; + } + else if (Z_REG_P (src) + && ((H_REG_P (dst) && !SP_REG_P (src)) || dst == cc0_rtx)) + { + XEXP (body, 1) = gen_rtx_REG (GET_MODE (src), SOFT_Z_REGNUM); + return; + } + else if (D_REG_P (dst) + && m68hc11_arith_operator (src, GET_MODE (src)) + && D_REG_P (XEXP (src, 0)) && Z_REG_P (XEXP (src, 1))) + { + XEXP (src, 1) = gen_rtx_REG (GET_MODE (src), SOFT_Z_REGNUM); + return; + } + else if (Z_REG_P (dst) && GET_CODE (src) == CONST_INT + && INTVAL (src) == 0) + { + XEXP (body, 0) = gen_rtx_REG (GET_MODE (dst), SOFT_Z_REGNUM); + /* Force it to be re-recognized. */ + INSN_CODE (insn) = -1; + return; + } + } + + m68hc11_find_z_replacement (insn, &info); + + replace_reg = info.replace_reg; + replace_reg_qi = NULL_RTX; + + /* Save the X register in a .page0 location. */ + if (info.must_save_reg && !info.must_push_reg) + { + rtx dst; + + if (info.must_push_reg && 0) + dst = gen_rtx_MEM (HImode, + gen_rtx_PRE_DEC (HImode, + gen_rtx_REG (HImode, HARD_SP_REGNUM))); + else + dst = gen_rtx_REG (HImode, SOFT_SAVED_XY_REGNUM); + + emit_insn_before (gen_movhi (dst, + gen_rtx_REG (HImode, info.regno)), insn); + } + if (info.must_load_z && !info.must_push_reg) + { + emit_insn_before (gen_movhi (gen_rtx_REG (HImode, info.regno), + gen_rtx_REG (HImode, SOFT_Z_REGNUM)), + insn); + } + + + /* Replace all occurrence of Z by replace_reg. + Stop when the last instruction to replace is reached. + Also stop when we detect a change in the flow (but it's not + necessary; just safeguard). */ + + for (; insn && insn != info.last; insn = NEXT_INSN (insn)) + { + rtx body; + + if (GET_CODE (insn) == CODE_LABEL || GET_CODE (insn) == BARRIER) + break; + + if (GET_CODE (insn) != INSN + && GET_CODE (insn) != CALL_INSN && GET_CODE (insn) != JUMP_INSN) + continue; + + body = PATTERN (insn); + if (GET_CODE (body) == SET || GET_CODE (body) == PARALLEL + || GET_CODE (body) == ASM_OPERANDS + || GET_CODE (insn) == CALL_INSN || GET_CODE (insn) == JUMP_INSN) + { + rtx note; + + if (debug_m6811 && reg_mentioned_p (replace_reg, body)) + { + printf ("Reg mentioned here...:\n"); + fflush (stdout); + debug_rtx (insn); + } + + /* Stack pointer was decremented by 2 due to the push. + Correct that by adding 2 to the destination. */ + if (info.must_push_reg + && info.z_loaded_with_sp && GET_CODE (body) == SET) + { + rtx src, dst; + + src = SET_SRC (body); + dst = SET_DEST (body); + if (SP_REG_P (src) && Z_REG_P (dst)) + emit_insn_after (gen_addhi3 (dst, dst, const2_rtx), insn); + } + + /* Replace any (REG:HI Z) occurrence by either X or Y. */ + if (!validate_replace_rtx (z_reg, replace_reg, insn)) + { + INSN_CODE (insn) = -1; + if (!validate_replace_rtx (z_reg, replace_reg, insn)) + fatal_insn ("cannot do z-register replacement", insn); + } + + /* Likewise for (REG:QI Z). */ + if (reg_mentioned_p (z_reg, insn)) + { + if (replace_reg_qi == NULL_RTX) + replace_reg_qi = gen_rtx_REG (QImode, REGNO (replace_reg)); + validate_replace_rtx (z_reg_qi, replace_reg_qi, insn); + } + + /* If there is a REG_INC note on Z, replace it with a + REG_INC note on the replacement register. This is necessary + to make sure that the flow pass will identify the change + and it will not remove a possible insn that saves Z. */ + for (note = REG_NOTES (insn); note; note = XEXP (note, 1)) + { + if (REG_NOTE_KIND (note) == REG_INC + && GET_CODE (XEXP (note, 0)) == REG + && REGNO (XEXP (note, 0)) == REGNO (z_reg)) + { + XEXP (note, 0) = replace_reg; + } + } + } + if (GET_CODE (insn) == CALL_INSN || GET_CODE (insn) == JUMP_INSN) + break; + } + + /* Save Z before restoring the old value. */ + if (insn && info.need_save_z && !info.must_push_reg) + { + rtx save_pos_insn = insn; + + /* If Z is clobber by the last insn, we have to save its value + before the last instruction. */ + if (info.save_before_last) + save_pos_insn = PREV_INSN (save_pos_insn); + + emit_insn_before (gen_movhi (gen_rtx_REG (HImode, SOFT_Z_REGNUM), + gen_rtx_REG (HImode, info.regno)), + save_pos_insn); + } + + if (info.must_push_reg && info.last) + { + rtx new_body, body; + + body = PATTERN (info.last); + new_body = gen_rtx_PARALLEL (VOIDmode, + gen_rtvec (3, body, + gen_rtx_USE (VOIDmode, + replace_reg), + gen_rtx_USE (VOIDmode, + gen_rtx_REG (HImode, + SOFT_Z_REGNUM)))); + PATTERN (info.last) = new_body; + + /* Force recognition on insn since we changed it. */ + INSN_CODE (insn) = -1; + + if (!validate_replace_rtx (z_reg, replace_reg, info.last)) + { + fatal_insn ("invalid Z register replacement for insn", insn); + } + insn = NEXT_INSN (info.last); + } + + /* Restore replacement register unless it was died. */ + if (insn && info.must_restore_reg && !info.must_push_reg) + { + rtx dst; + + if (info.must_push_reg && 0) + dst = gen_rtx_MEM (HImode, + gen_rtx_POST_INC (HImode, + gen_rtx_REG (HImode, HARD_SP_REGNUM))); + else + dst = gen_rtx_REG (HImode, SOFT_SAVED_XY_REGNUM); + + emit_insn_before (gen_movhi (gen_rtx_REG (HImode, info.regno), + dst), insn); + } + +} + + +/* Scan all the insn and re-affects some registers + - The Z register (if it was used), is affected to X or Y depending + on the instruction. */ + +static void +m68hc11_reassign_regs (rtx first) +{ + rtx insn; + + ix_reg = gen_rtx_REG (HImode, HARD_X_REGNUM); + iy_reg = gen_rtx_REG (HImode, HARD_Y_REGNUM); + z_reg = gen_rtx_REG (HImode, HARD_Z_REGNUM); + z_reg_qi = gen_rtx_REG (QImode, HARD_Z_REGNUM); + + /* Scan all insns to replace Z by X or Y preserving the old value + of X/Y and restoring it afterward. */ + + for (insn = first; insn; insn = NEXT_INSN (insn)) + { + rtx body; + + if (GET_CODE (insn) == CODE_LABEL + || GET_CODE (insn) == NOTE || GET_CODE (insn) == BARRIER) + continue; + + if (!INSN_P (insn)) + continue; + + body = PATTERN (insn); + if (GET_CODE (body) == CLOBBER || GET_CODE (body) == USE) + continue; + + if (GET_CODE (body) == CONST_INT || GET_CODE (body) == ASM_INPUT + || GET_CODE (body) == ASM_OPERANDS + || GET_CODE (body) == UNSPEC || GET_CODE (body) == UNSPEC_VOLATILE) + continue; + + if (GET_CODE (body) == SET || GET_CODE (body) == PARALLEL + || GET_CODE (insn) == CALL_INSN || GET_CODE (insn) == JUMP_INSN) + { + + /* If Z appears in this insn, replace it in the current insn + and the next ones until the flow changes or we have to + restore back the replacement register. */ + + if (reg_mentioned_p (z_reg, body)) + { + m68hc11_z_replacement (insn); + } + } + else + { + printf ("insn not handled by Z replacement:\n"); + fflush (stdout); + debug_rtx (insn); + } + } +} + + +/* Machine-dependent reorg pass. + Specific optimizations are defined here: + - this pass changes the Z register into either X or Y + (it preserves X/Y previous values in a memory slot in page0). + + When this pass is finished, the global variable + 'z_replacement_completed' is set to 2. */ + +static void +m68hc11_reorg (void) +{ + int split_done = 0; + rtx first; + + z_replacement_completed = 0; + z_reg = gen_rtx_REG (HImode, HARD_Z_REGNUM); + first = get_insns (); + + /* Some RTX are shared at this point. This breaks the Z register + replacement, unshare everything. */ + unshare_all_rtl_again (first); + + /* Force a split of all splittable insn. This is necessary for the + Z register replacement mechanism because we end up with basic insns. */ + split_all_insns_noflow (); + split_done = 1; + + z_replacement_completed = 1; + m68hc11_reassign_regs (first); + + if (optimize) + compute_bb_for_insn (); + + /* After some splitting, there are some opportunities for CSE pass. + This happens quite often when 32-bit or above patterns are split. */ + if (optimize > 0 && split_done) + { + reload_cse_regs (first); + } + + /* Re-create the REG_DEAD notes. These notes are used in the machine + description to use the best assembly directives. */ + if (optimize) + { + df_note_add_problem (); + df_analyze (); + df_remove_problem (df_note); + } + + z_replacement_completed = 2; + + /* If optimizing, then go ahead and split insns that must be + split after Z register replacement. This gives more opportunities + for peephole (in particular for consecutives xgdx/xgdy). */ + if (optimize > 0) + split_all_insns_noflow (); + + /* Once insns are split after the z_replacement_completed == 2, + we must not re-run the life_analysis. The xgdx/xgdy patterns + are not recognized and the life_analysis pass removes some + insns because it thinks some (SETs) are noops or made to dead + stores (which is false due to the swap). + + Do a simple pass to eliminate the noop set that the final + split could generate (because it was easier for split definition). */ + { + rtx insn; + + for (insn = first; insn; insn = NEXT_INSN (insn)) + { + rtx body; + + if (INSN_DELETED_P (insn)) + continue; + if (!INSN_P (insn)) + continue; + + /* Remove the (set (R) (R)) insns generated by some splits. */ + body = PATTERN (insn); + if (GET_CODE (body) == SET + && rtx_equal_p (SET_SRC (body), SET_DEST (body))) + { + SET_INSN_DELETED (insn); + continue; + } + } + } +} + +/* Override memcpy */ + +static void +m68hc11_init_libfuncs (void) +{ + memcpy_libfunc = init_one_libfunc ("__memcpy"); + memcmp_libfunc = init_one_libfunc ("__memcmp"); + memset_libfunc = init_one_libfunc ("__memset"); +} + + + +/* Cost functions. */ + +/* Cost of moving memory. */ +int +m68hc11_memory_move_cost (enum machine_mode mode, enum reg_class rclass, + int in ATTRIBUTE_UNUSED) +{ + if (rclass <= H_REGS && rclass > NO_REGS) + { + if (GET_MODE_SIZE (mode) <= 2) + return COSTS_N_INSNS (1) + (reload_completed | reload_in_progress); + else + return COSTS_N_INSNS (2) + (reload_completed | reload_in_progress); + } + else + { + if (GET_MODE_SIZE (mode) <= 2) + return COSTS_N_INSNS (3); + else + return COSTS_N_INSNS (4); + } +} + + +/* Cost of moving data from a register of class 'from' to on in class 'to'. + Reload does not check the constraint of set insns when the two registers + have a move cost of 2. Setting a higher cost will force reload to check + the constraints. */ +int +m68hc11_register_move_cost (enum machine_mode mode, enum reg_class from, + enum reg_class to) +{ + /* All costs are symmetric, so reduce cases by putting the + lower number class as the destination. */ + if (from < to) + { + enum reg_class tmp = to; + to = from, from = tmp; + } + if (to >= S_REGS) + return m68hc11_memory_move_cost (mode, S_REGS, 0); + else if (from <= S_REGS) + return COSTS_N_INSNS (1) + (reload_completed | reload_in_progress); + else + return COSTS_N_INSNS (2); +} + + +/* Provide the costs of an addressing mode that contains ADDR. + If ADDR is not a valid address, its cost is irrelevant. */ + +static int +m68hc11_address_cost (rtx addr, bool speed ATTRIBUTE_UNUSED) +{ + int cost = 4; + + switch (GET_CODE (addr)) + { + case REG: + /* Make the cost of hard registers and specially SP, FP small. */ + if (REGNO (addr) < FIRST_PSEUDO_REGISTER) + cost = 0; + else + cost = 1; + break; + + case SYMBOL_REF: + cost = 8; + break; + + case LABEL_REF: + case CONST: + cost = 0; + break; + + case PLUS: + { + register rtx plus0 = XEXP (addr, 0); + register rtx plus1 = XEXP (addr, 1); + + if (GET_CODE (plus0) != REG) + break; + + switch (GET_CODE (plus1)) + { + case CONST_INT: + if (INTVAL (plus1) >= 2 * m68hc11_max_offset + || INTVAL (plus1) < m68hc11_min_offset) + cost = 3; + else if (INTVAL (plus1) >= m68hc11_max_offset) + cost = 2; + else + cost = 1; + if (REGNO (plus0) < FIRST_PSEUDO_REGISTER) + cost += 0; + else + cost += 1; + break; + + case SYMBOL_REF: + cost = 8; + break; + + case CONST: + case LABEL_REF: + cost = 0; + break; + + default: + break; + } + break; + } + case PRE_DEC: + case PRE_INC: + if (SP_REG_P (XEXP (addr, 0))) + cost = 1; + break; + + default: + break; + } + if (debug_m6811) + { + printf ("Address cost: %d for :", cost); + fflush (stdout); + debug_rtx (addr); + } + + return cost; +} + +static int +m68hc11_shift_cost (enum machine_mode mode, rtx x, int shift) +{ + int total; + + total = rtx_cost (x, SET, !optimize_size); + if (mode == QImode) + total += m68hc11_cost->shiftQI_const[shift % 8]; + else if (mode == HImode) + total += m68hc11_cost->shiftHI_const[shift % 16]; + else if (shift == 8 || shift == 16 || shift == 32) + total += m68hc11_cost->shiftHI_const[8]; + else if (shift != 0 && shift != 16 && shift != 32) + { + total += m68hc11_cost->shiftHI_const[1] * shift; + } + + /* For SI and others, the cost is higher. */ + if (GET_MODE_SIZE (mode) > 2 && (shift % 16) != 0) + total *= GET_MODE_SIZE (mode) / 2; + + /* When optimizing for size, make shift more costly so that + multiplications are preferred. */ + if (optimize_size && (shift % 8) != 0) + total *= 2; + + return total; +} + +static int +m68hc11_rtx_costs_1 (rtx x, enum rtx_code code, + enum rtx_code outer_code ATTRIBUTE_UNUSED) +{ + enum machine_mode mode = GET_MODE (x); + int extra_cost = 0; + int total; + + switch (code) + { + case ROTATE: + case ROTATERT: + case ASHIFT: + case LSHIFTRT: + case ASHIFTRT: + if (GET_CODE (XEXP (x, 1)) == CONST_INT) + { + return m68hc11_shift_cost (mode, XEXP (x, 0), INTVAL (XEXP (x, 1))); + } + + total = rtx_cost (XEXP (x, 0), code, !optimize_size) + rtx_cost (XEXP (x, 1), code, !optimize_size); + total += m68hc11_cost->shift_var; + return total; + + case AND: + case XOR: + case IOR: + total = rtx_cost (XEXP (x, 0), code, !optimize_size) + rtx_cost (XEXP (x, 1), code, !optimize_size); + total += m68hc11_cost->logical; + + /* Logical instructions are byte instructions only. */ + total *= GET_MODE_SIZE (mode); + return total; + + case MINUS: + case PLUS: + total = rtx_cost (XEXP (x, 0), code, !optimize_size) + rtx_cost (XEXP (x, 1), code, !optimize_size); + total += m68hc11_cost->add; + if (GET_MODE_SIZE (mode) > 2) + { + total *= GET_MODE_SIZE (mode) / 2; + } + return total; + + case UDIV: + case DIV: + case MOD: + total = rtx_cost (XEXP (x, 0), code, !optimize_size) + rtx_cost (XEXP (x, 1), code, !optimize_size); + switch (mode) + { + case QImode: + total += m68hc11_cost->divQI; + break; + + case HImode: + total += m68hc11_cost->divHI; + break; + + case SImode: + default: + total += m68hc11_cost->divSI; + break; + } + return total; + + case MULT: + /* mul instruction produces 16-bit result. */ + if (mode == HImode && GET_CODE (XEXP (x, 0)) == ZERO_EXTEND + && GET_CODE (XEXP (x, 1)) == ZERO_EXTEND) + return m68hc11_cost->multQI + + rtx_cost (XEXP (XEXP (x, 0), 0), code, !optimize_size) + + rtx_cost (XEXP (XEXP (x, 1), 0), code, !optimize_size); + + /* emul instruction produces 32-bit result for 68HC12. */ + if (TARGET_M6812 && mode == SImode + && GET_CODE (XEXP (x, 0)) == ZERO_EXTEND + && GET_CODE (XEXP (x, 1)) == ZERO_EXTEND) + return m68hc11_cost->multHI + + rtx_cost (XEXP (XEXP (x, 0), 0), code, !optimize_size) + + rtx_cost (XEXP (XEXP (x, 1), 0), code, !optimize_size); + + total = rtx_cost (XEXP (x, 0), code, !optimize_size) + + rtx_cost (XEXP (x, 1), code, !optimize_size); + switch (mode) + { + case QImode: + total += m68hc11_cost->multQI; + break; + + case HImode: + total += m68hc11_cost->multHI; + break; + + case SImode: + default: + total += m68hc11_cost->multSI; + break; + } + return total; + + case NEG: + case SIGN_EXTEND: + extra_cost = COSTS_N_INSNS (2); + + /* Fall through */ + case NOT: + case COMPARE: + case ABS: + case ZERO_EXTEND: + total = extra_cost + rtx_cost (XEXP (x, 0), code, !optimize_size); + if (mode == QImode) + { + return total + COSTS_N_INSNS (1); + } + if (mode == HImode) + { + return total + COSTS_N_INSNS (2); + } + if (mode == SImode) + { + return total + COSTS_N_INSNS (4); + } + return total + COSTS_N_INSNS (8); + + case IF_THEN_ELSE: + if (GET_CODE (XEXP (x, 1)) == PC || GET_CODE (XEXP (x, 2)) == PC) + return COSTS_N_INSNS (1); + + return COSTS_N_INSNS (1); + + default: + return COSTS_N_INSNS (4); + } +} + +static bool +m68hc11_rtx_costs (rtx x, int code, int outer_code, int *total, + bool speed ATTRIBUTE_UNUSED) +{ + switch (code) + { + /* Constants are cheap. Moving them in registers must be avoided + because most instructions do not handle two register operands. */ + case CONST_INT: + case CONST: + case LABEL_REF: + case SYMBOL_REF: + case CONST_DOUBLE: + /* Logical and arithmetic operations with a constant operand are + better because they are not supported with two registers. */ + /* 'clr' is slow */ + if (outer_code == SET && x == const0_rtx) + /* After reload, the reload_cse pass checks the cost to change + a SET into a PLUS. Make const0 cheap then. */ + *total = 1 - reload_completed; + else + *total = 0; + return true; + + case ROTATE: + case ROTATERT: + case ASHIFT: + case LSHIFTRT: + case ASHIFTRT: + case MINUS: + case PLUS: + case AND: + case XOR: + case IOR: + case UDIV: + case DIV: + case MOD: + case MULT: + case NEG: + case SIGN_EXTEND: + case NOT: + case COMPARE: + case ZERO_EXTEND: + case IF_THEN_ELSE: + *total = m68hc11_rtx_costs_1 (x, code, outer_code); + return true; + + default: + return false; + } +} + + +/* Worker function for TARGET_ASM_FILE_START. */ + +static void +m68hc11_file_start (void) +{ + default_file_start (); + + fprintf (asm_out_file, "\t.mode %s\n", TARGET_SHORT ? "mshort" : "mlong"); +} + + +/* Worker function for TARGET_ASM_CONSTRUCTOR. */ + +static void +m68hc11_asm_out_constructor (rtx symbol, int priority) +{ + default_ctor_section_asm_out_constructor (symbol, priority); + fprintf (asm_out_file, "\t.globl\t__do_global_ctors\n"); +} + +/* Worker function for TARGET_ASM_DESTRUCTOR. */ + +static void +m68hc11_asm_out_destructor (rtx symbol, int priority) +{ + default_dtor_section_asm_out_destructor (symbol, priority); + fprintf (asm_out_file, "\t.globl\t__do_global_dtors\n"); +} + +/* Worker function for TARGET_STRUCT_VALUE_RTX. */ + +static rtx +m68hc11_struct_value_rtx (tree fntype ATTRIBUTE_UNUSED, + int incoming ATTRIBUTE_UNUSED) +{ + return gen_rtx_REG (Pmode, HARD_D_REGNUM); +} + +/* Return true if type TYPE should be returned in memory. + Blocks and data types largers than 4 bytes cannot be returned + in the register (D + X = 4). */ + +static bool +m68hc11_return_in_memory (const_tree type, const_tree fntype ATTRIBUTE_UNUSED) +{ + if (TYPE_MODE (type) == BLKmode) + { + HOST_WIDE_INT size = int_size_in_bytes (type); + return (size == -1 || size > 4); + } + else + return GET_MODE_SIZE (TYPE_MODE (type)) > 4; +} + +#include "gt-m68hc11.h" |