diff options
Diffstat (limited to 'binutils-2.25/binutils/Makefile.am')
| -rw-r--r-- | binutils-2.25/binutils/Makefile.am | 547 |
1 files changed, 547 insertions, 0 deletions
diff --git a/binutils-2.25/binutils/Makefile.am b/binutils-2.25/binutils/Makefile.am new file mode 100644 index 00000000..e2f86305 --- /dev/null +++ b/binutils-2.25/binutils/Makefile.am @@ -0,0 +1,547 @@ +## Process this file with automake to generate Makefile.in +# +# Copyright 2012 Free Software Foundation +# +# This file is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; see the file COPYING3. If not see +# <http://www.gnu.org/licenses/>. +# + +AUTOMAKE_OPTIONS = dejagnu no-dist foreign +ACLOCAL_AMFLAGS = -I .. -I ../config -I ../bfd + +SUBDIRS = doc po + +tooldir = $(exec_prefix)/$(target_alias) + +## These aren't set by automake, because they appear in +## bfd/acinclude.m4, which is included by binutils/acinclude.m4, and +## thus is not seen by automake. +CC_FOR_BUILD = @CC_FOR_BUILD@ +EXEEXT_FOR_BUILD = @EXEEXT_FOR_BUILD@ + +YACC = `if [ -f ../bison/bison ]; then echo ../bison/bison -y -L$(srcdir)/../bison/; else echo @YACC@; fi` +YFLAGS = -d +LEX = `if [ -f ../flex/flex ]; then echo ../flex/flex; else echo @LEX@; fi` +LEXLIB = @LEXLIB@ + +# Automake 1.10+ disables lex and yacc output file regeneration if +# maintainer mode is disabled. Avoid this. +am__skiplex = +am__skipyacc = + +WARN_CFLAGS = @WARN_CFLAGS@ +NO_WERROR = @NO_WERROR@ +AM_CFLAGS = $(WARN_CFLAGS) +LIBICONV = @LIBICONV@ + +# these two are almost the same program +AR_PROG=ar +RANLIB_PROG=ranlib + +# objcopy and strip should be the same program +OBJCOPY_PROG=objcopy +STRIP_PROG=strip-new + +STRINGS_PROG=strings + +READELF_PROG=readelf + +ELFEDIT_PROG=elfedit + +# These should all be the same program too. +SIZE_PROG=size +NM_PROG=nm-new +OBJDUMP_PROG=objdump + +# This is the demangler, as a standalone program. +# Note: This one is used as the installed name too, unlike the above. +DEMANGLER_PROG=cxxfilt + +ADDR2LINE_PROG=addr2line + +NLMCONV_PROG=nlmconv +DLLTOOL_PROG=dlltool +WINDRES_PROG=windres +WINDMC_PROG=windmc +DLLWRAP_PROG=dllwrap + +SRCONV_PROG=srconv$(EXEEXT) sysdump$(EXEEXT) coffdump$(EXEEXT) + +bin_PROGRAMS = $(SIZE_PROG) $(OBJDUMP_PROG) $(AR_PROG) $(STRINGS_PROG) $(RANLIB_PROG) $(OBJCOPY_PROG) @BUILD_NLMCONV@ @BUILD_SRCONV@ @BUILD_DLLTOOL@ @BUILD_WINDRES@ @BUILD_WINDMC@ $(ADDR2LINE_PROG) $(READELF_PROG) $(ELFEDIT_PROG) @BUILD_DLLWRAP@ + +bin_SCRIPTS = @BUILD_INSTALL_MISC@ +EXTRA_SCRIPTS = embedspu + +## Test programs. +BFDTEST1_PROG = bfdtest1 +BFDTEST2_PROG = bfdtest2 + +TEST_PROGS = $(BFDTEST1_PROG) $(BFDTEST2_PROG) + +## We need a special rule to install the programs which are built with +## -new, and to rename cxxfilt to c++filt. +RENAMED_PROGS = $(NM_PROG) $(STRIP_PROG) $(DEMANGLER_PROG) +noinst_PROGRAMS = $(RENAMED_PROGS) $(TEST_PROGS) @BUILD_MISC@ + +EXTRA_PROGRAMS = $(NLMCONV_PROG) srconv sysdump coffdump $(DLLTOOL_PROG) $(WINDRES_PROG) $(WINDMC_PROG) $(DLLWRAP_PROG) + +# Stuff that goes in tooldir/ if appropriate. +TOOL_PROGS = nm-new strip-new ar ranlib dlltool objdump objcopy + +BASEDIR = $(srcdir)/.. +BFDDIR = $(BASEDIR)/bfd +INCDIR = $(BASEDIR)/include + +AM_CPPFLAGS = -I. -I$(srcdir) -I../bfd -I$(BFDDIR) -I$(INCDIR) \ + @HDEFINES@ \ + @INCINTL@ \ + -DLOCALEDIR="\"$(datadir)/locale\"" \ + -Dbin_dummy_emulation=$(EMULATION_VECTOR) + +HFILES = \ + arsup.h binemul.h bucomm.h budbg.h \ + coffgrok.h debug.h dlltool.h dwarf.h elfcomm.h nlmconv.h \ + objdump.h sysdep.h unwind-ia64.h windres.h winduni.h windint.h \ + windmc.h + +GENERATED_HFILES = arparse.h sysroff.h sysinfo.h defparse.h rcparse.h mcparse.h +BUILT_SOURCES = $(GENERATED_HFILES) + +CFILES = \ + addr2line.c ar.c arsup.c bin2c.c binemul.c bucomm.c \ + coffdump.c coffgrok.c cxxfilt.c \ + dwarf.c debug.c dlltool.c dllwrap.c \ + elfcomm.c emul_aix.c emul_vanilla.c filemode.c \ + ieee.c is-ranlib.c is-strip.c maybe-ranlib.c maybe-strip.c \ + nlmconv.c nm.c not-ranlib.c not-strip.c \ + objcopy.c objdump.c prdbg.c \ + od-xcoff.c od-macho.c \ + rclex.c rdcoff.c rddbg.c readelf.c rename.c \ + resbin.c rescoff.c resrc.c resres.c \ + size.c srconv.c stabs.c strings.c sysdump.c \ + syslex_wrap.c unwind-ia64.c elfedit.c version.c \ + windres.c winduni.c wrstabs.c \ + windmc.c mclex.c + +GENERATED_CFILES = \ + arparse.c arlex.c sysroff.c sysinfo.c syslex.c \ + defparse.c deflex.c nlmheader.c rcparse.c mcparse.c + +DEBUG_SRCS = rddbg.c debug.c stabs.c ieee.c rdcoff.c +WRITE_DEBUG_SRCS = $(DEBUG_SRCS) wrstabs.c + +# Extra object files for objdump +OBJDUMP_PRIVATE_OFILES = @OBJDUMP_PRIVATE_OFILES@ + +# Code shared by all the binutils. +BULIBS = bucomm.c version.c filemode.c + +# Code shared by the ELF related programs. +ELFLIBS = elfcomm.c + +BFDLIB = ../bfd/libbfd.la + +OPCODES = ../opcodes/libopcodes.la + +LIBIBERTY = ../libiberty/libiberty.a + +POTFILES = $(CFILES) $(DEBUG_SRCS) $(HFILES) +po/POTFILES.in: @MAINT@ Makefile + for f in $(POTFILES); do echo $$f; done | LC_ALL=C sort > tmp \ + && mv tmp $(srcdir)/po/POTFILES.in + +EXPECT = expect +RUNTEST = runtest + +CC_FOR_TARGET = ` \ + if [ -f $$r/../gcc/xgcc ] ; then \ + if [ -f $$r/../newlib/Makefile ] ; then \ + echo $$r/../gcc/xgcc -B$$r/../gcc/ -idirafter $$r/../newlib/targ-include -idirafter $${srcroot}/../newlib/libc/include -nostdinc; \ + else \ + echo $$r/../gcc/xgcc -B$$r/../gcc/; \ + fi; \ + else \ + if [ "@host@" = "@target@" ] ; then \ + echo $(CC); \ + else \ + echo gcc | sed '$(transform)'; \ + fi; \ + fi` + +check-DEJAGNU: site.exp + srcdir=`cd $(srcdir) && pwd`; export srcdir; \ + r=`pwd`; export r; \ + LC_ALL=C; export LC_ALL; \ + EXPECT=$(EXPECT); export EXPECT; \ + runtest=$(RUNTEST); \ + if $(SHELL) -c "$$runtest --version" > /dev/null 2>&1; then \ + CC_FOR_TARGET="$(CC_FOR_TARGET)" CFLAGS_FOR_TARGET="$(CFLAGS)" \ + $$runtest --tool $(DEJATOOL) --srcdir $${srcdir}/testsuite \ + $(RUNTESTFLAGS); \ + else echo "WARNING: could not find \`runtest'" 1>&2; :;\ + fi + +installcheck-local: + /bin/sh $(srcdir)/sanity.sh $(bindir) + +# There's no global DEPENDENCIES. So, we must explicitly list everything +# which depends on libintl, since we don't know whether LIBINTL_DEP will be +# non-empty until configure time. Ugh! +size_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) +objdump_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) $(OPCODES) $(OBJDUMP_PRIVATE_OFILES) +nm_new_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) +ar_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) +strings_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) +strip_new_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) +ranlib_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) +cxxfilt_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) +objcopy_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) +nlmconv_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) +srconv_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) +sysdump_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) +coffdump_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) +dlltool_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) +windres_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) +windmc_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) +addr2line_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) +readelf_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) +elfedit_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) +dllwrap_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) +bfdtest1_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) +bfdtest2_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) + +LDADD = $(BFDLIB) $(LIBIBERTY) $(LIBINTL) + +size_SOURCES = size.c $(BULIBS) + +objcopy_SOURCES = objcopy.c not-strip.c rename.c $(WRITE_DEBUG_SRCS) $(BULIBS) + +strings_SOURCES = strings.c $(BULIBS) + +readelf_SOURCES = readelf.c version.c unwind-ia64.c dwarf.c $(ELFLIBS) +readelf_LDADD = $(LIBINTL) $(LIBIBERTY) + +elfedit_SOURCES = elfedit.c version.c $(ELFLIBS) +elfedit_LDADD = $(LIBINTL) $(LIBIBERTY) + +strip_new_SOURCES = objcopy.c is-strip.c rename.c $(WRITE_DEBUG_SRCS) $(BULIBS) + +nm_new_SOURCES = nm.c $(BULIBS) + +objdump_SOURCES = objdump.c dwarf.c prdbg.c $(DEBUG_SRCS) $(BULIBS) $(ELFLIBS) +EXTRA_objdump_SOURCES = od-xcoff.c +objdump_LDADD = $(OBJDUMP_PRIVATE_OFILES) $(OPCODES) $(BFDLIB) $(LIBIBERTY) $(LIBINTL) + +objdump.@OBJEXT@:objdump.c +if am__fastdepCC + $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(OBJDUMP_DEFS) $(srcdir)/objdump.c + mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +else +if AMDEP + source='objdump.c' object='$@' libtool=no @AMDEPBACKSLASH@ + DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +endif + $(COMPILE) -c $(OBJDUMP_DEFS) $(srcdir)/objdump.c +endif + +cxxfilt_SOURCES = cxxfilt.c $(BULIBS) + +ar_SOURCES = arparse.y arlex.l ar.c not-ranlib.c arsup.c rename.c binemul.c \ + emul_$(EMULATION).c $(BULIBS) +EXTRA_ar_SOURCES = $(CFILES) +ar_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL) + +ranlib_SOURCES = ar.c is-ranlib.c arparse.y arlex.l arsup.c rename.c \ + binemul.c emul_$(EMULATION).c $(BULIBS) +ranlib_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL) + +addr2line_SOURCES = addr2line.c $(BULIBS) + +# The following is commented out for the conversion to automake. +# This rule creates a single binary that switches between ar and ranlib +# by looking at argv[0]. Use this kludge to save some disk space. +# However, you have to install things by hand. +# (That is after 'make install', replace the installed ranlib by a link to ar.) +# Alternatively, you can install ranlib.sh as ranlib. +# ar_with_ranlib: $(ADDL_DEPS) ar.o maybe-ranlib.o +# $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(AR_PROG) ar.o maybe-ranlib.o $(ADDL_LIBS) $(EXTRALIBS) +# -rm -f $(RANLIB_PROG) +# -ln $(AR_PROG) $(RANLIB_PROG) +# +# objcopy and strip in one binary that uses argv[0] to decide its action. +# +#objcopy_with_strip: $(ADDL_DEPS) objcopy.o maybe-strip.o +# $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(OBJCOPY_PROG) objcopy.o maybe-strip.o $(ADDL_LIBS) $(EXTRALIBS) +# -rm -f $(STRIP_PROG) +# -ln $(OBJCOPY_PROG) $(STRIP_PROG) + +sysroff.c: sysinfo$(EXEEXT_FOR_BUILD) sysroff.info + ./sysinfo$(EXEEXT_FOR_BUILD) -c <$(srcdir)/sysroff.info >sysroff.c + ./sysinfo$(EXEEXT_FOR_BUILD) -i <$(srcdir)/sysroff.info >>sysroff.c + ./sysinfo$(EXEEXT_FOR_BUILD) -g <$(srcdir)/sysroff.info >>sysroff.c + +sysroff.h: sysinfo$(EXEEXT_FOR_BUILD) sysroff.info + ./sysinfo$(EXEEXT_FOR_BUILD) -d <$(srcdir)/sysroff.info >sysroff.h + +sysinfo$(EXEEXT_FOR_BUILD): sysinfo.@OBJEXT@ syslex_wrap.@OBJEXT@ + $(CC_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) -o $@ sysinfo.@OBJEXT@ syslex_wrap.@OBJEXT@ + +syslex_wrap.@OBJEXT@: syslex_wrap.c syslex.c sysinfo.h config.h + $(CC_FOR_BUILD) -c -I. -I$(srcdir) $(AM_CFLAGS) $(CFLAGS_FOR_BUILD) $(NO_WERROR) $(srcdir)/syslex_wrap.c + +sysinfo.@OBJEXT@: sysinfo.c + if [ -r sysinfo.c ]; then \ + $(CC_FOR_BUILD) -c -I. $(AM_CFLAGS) $(CFLAGS_FOR_BUILD) $(NO_WERROR) sysinfo.c ; \ + else \ + $(CC_FOR_BUILD) -c -I. $(AM_CFLAGS) $(CFLAGS_FOR_BUILD) $(NO_WERROR) $(srcdir)/sysinfo.c ; \ + fi + +bin2c$(EXEEXT_FOR_BUILD): bin2c.c + $(CC_FOR_BUILD) -o $@ $(AM_CPPFLAGS) $(AM_CFLAGS) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) $(srcdir)/bin2c.c + +embedspu: embedspu.sh Makefile + awk '/^program_transform_name=/ {print "program_transform_name=\"$(program_transform_name)\""; next} {print}' < $< > $@ + chmod a+x $@ + +# We need these for parallel make. +sysinfo.h: sysinfo.c + +# Disable -Werror, if it has been enabled, since old versions of bison/ +# yacc will produce working code which contain compile time warnings. +arparse.@OBJEXT@: arparse.c +if am__fastdepCC + $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f arparse.c || echo $(srcdir)/`arparse.c $(NO_WERROR) + mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +else +if AMDEP + source='arparse.c' object='$@' libtool=no @AMDEPBACKSLASH@ + DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +endif + $(COMPILE) -c `test -f arparse.c || echo $(srcdir)/`arparse.c $(NO_WERROR) +endif + +arlex.@OBJEXT@: arlex.c +if am__fastdepCC + $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f arlex.c || echo $(srcdir)/`arlex.c $(NO_WERROR) + mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +else +if AMDEP + source='arlex.c' object='$@' libtool=no @AMDEPBACKSLASH@ + DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +endif + $(COMPILE) -c `test -f arlex.c || echo $(srcdir)/`arlex.c $(NO_WERROR) +endif + +sysroff.@OBJEXT@: sysroff.c +if am__fastdepCC + $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f sysroff.c || echo $(srcdir)/`sysroff.c $(NO_WERROR) + mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +else +if AMDEP + source='sysroff.c' object='$@' libtool=no @AMDEPBACKSLASH@ + DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +endif + $(COMPILE) -c `test -f sysroff.c || echo $(srcdir)/`sysroff.c $(NO_WERROR) +endif + +defparse.@OBJEXT@: defparse.c +if am__fastdepCC + $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f defparse.c || echo $(srcdir)/`defparse.c $(NO_WERROR) + mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +else +if AMDEP + source='defparse.c' object='$@' libtool=no @AMDEPBACKSLASH@ + DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +endif + $(COMPILE) -c `test -f defparse.c || echo $(srcdir)/`defparse.c $(NO_WERROR) +endif + +deflex.@OBJEXT@: deflex.c +if am__fastdepCC + $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR) + mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +else +if AMDEP + source='deflex.c' object='$@' libtool=no @AMDEPBACKSLASH@ + DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +endif + $(COMPILE) -c `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR) +endif + +nlmheader.@OBJEXT@: nlmheader.c +if am__fastdepCC + $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f nlmheader.c || echo $(srcdir)/`nlmheader.c $(NO_WERROR) + mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +else +if AMDEP + source='nlmheader.c' object='$@' libtool=no @AMDEPBACKSLASH@ + DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +endif + $(COMPILE) -c `test -f nlmheader.c || echo $(srcdir)/`nlmheader.c $(NO_WERROR) +endif + +rcparse.@OBJEXT@: rcparse.c +if am__fastdepCC + $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR) + mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +else +if AMDEP + source='rcparse.c' object='$@' libtool=no @AMDEPBACKSLASH@ + DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +endif + $(COMPILE) -c `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR) +endif + +mcparse.@OBJEXT@: mcparse.c +if am__fastdepCC + $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f mcparse.c || echo $(srcdir)/`mcparse.c $(NO_WERROR) + mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +else +if AMDEP + source='mcparse.c' object='$@' libtool=no @AMDEPBACKSLASH@ + DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +endif + $(COMPILE) -c `test -f mcparse.c || echo $(srcdir)/`mcparse.c $(NO_WERROR) +endif + +rclex.@OBJEXT@: rclex.c +if am__fastdepCC + $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/rclex.c $(NO_WERROR) + mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +else +if AMDEP + source='rclex.c' object='$@' libtool=no @AMDEPBACKSLASH@ + DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +endif + $(COMPILE) -c $(srcdir)/rclex.c $(NO_WERROR) +endif + +mclex.@OBJEXT@: mclex.c +if am__fastdepCC + $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/mclex.c $(NO_WERROR) + mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +else +if AMDEP + source='mclex.c' object='$@' libtool=no @AMDEPBACKSLASH@ + DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +endif + $(COMPILE) -c $(srcdir)/mclex.c $(NO_WERROR) +endif + +srconv_SOURCES = srconv.c coffgrok.c $(BULIBS) +srconv.@OBJEXT@: sysroff.c + +dlltool_SOURCES = dlltool.c defparse.y deflex.l $(BULIBS) +dlltool_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL) + +dlltool.@OBJEXT@: +if am__fastdepCC + $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(DLLTOOL_DEFS) $(srcdir)/dlltool.c + mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +else +if AMDEP + source='dlltool.c' object='$@' libtool=no @AMDEPBACKSLASH@ + DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +endif + $(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/dlltool.c +endif + +rescoff.@OBJEXT@: +if am__fastdepCC + $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(DLLTOOL_DEFS) $(srcdir)/rescoff.c + mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +else +if AMDEP + source='rescoff.c' object='$@' libtool=no @AMDEPBACKSLASH@ + DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +endif + $(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/rescoff.c +endif + +coffdump_SOURCES = coffdump.c coffgrok.c $(BULIBS) + +sysdump_SOURCES = sysdump.c $(BULIBS) +sysdump.@OBJEXT@: sysroff.c + +# coff/sym.h and coff/ecoff.h won't be found by the automatic dependency +# scripts, since they are only included conditionally. +nlmconv.@OBJEXT@: nlmconv.c +if am__fastdepCC + ldname=`echo ld | sed '$(transform)'`; \ + $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ \ + -DLD_NAME="\"$${ldname}\"" @NLMCONV_DEFS@ $(srcdir)/nlmconv.c + mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +else +if AMDEP + source='nlmconv.c' object='$@' libtool=no @AMDEPBACKSLASH@ + DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +endif + ldname=`echo ld | sed '$(transform)'`; \ + $(COMPILE) -c -DLD_NAME="\"$${ldname}\"" @NLMCONV_DEFS@ $(srcdir)/nlmconv.c +endif + +nlmconv_SOURCES = nlmconv.c nlmheader.y $(BULIBS) + +windres_SOURCES = windres.c resrc.c rescoff.c resbin.c rcparse.y rclex.c \ + winduni.c resres.c $(BULIBS) +windres_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL) $(LIBICONV) + +windmc_SOURCES = windmc.c mcparse.y mclex.c \ + winduni.c $(BULIBS) +windmc_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL) $(LIBICONV) + +dllwrap_SOURCES = dllwrap.c version.c +dllwrap_LDADD = $(LIBIBERTY) $(LIBINTL) + + +EXTRA_DIST = arparse.c arparse.h arlex.c nlmheader.c sysinfo.c sysinfo.h \ + syslex.c deflex.c defparse.h defparse.c rcparse.h rcparse.c \ + mcparse.h mcparse.c embedspu.sh + +diststuff: $(EXTRA_DIST) info +all: info + +# We extract version from bfd/configure.in, make sure to rerun configure +# when BFD's version changes. +CONFIG_STATUS_DEPENDENCIES = $(BFDDIR)/configure.in + +DISTCLEANFILES = sysroff.c sysroff.h site.exp site.bak embedspu + +MOSTLYCLEANFILES = sysinfo$(EXEEXT_FOR_BUILD) bin2c$(EXEEXT_FOR_BUILD) \ + binutils.log binutils.sum abcdefgh* +mostlyclean-local: + -rm -rf tmpdir + +.PHONY: install-exec-local + +install-exec-local: install-binPROGRAMS $(bin_PROGRAMS) $(noinst_PROGRAMS) + @list='$(RENAMED_PROGS)'; for p in $$list; do \ + if test -f $$p$(EXEEXT); then \ + echo " $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p$(EXEEXT) $(bindir)/`echo $$p|sed -e 's/-new//' -e 's/cxxfilt/$(DEMANGLER_NAME)/'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \ + $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p$(EXEEXT) $(DESTDIR)$(bindir)/`echo $$p|sed -e 's/-new//' -e 's/cxxfilt/$(DEMANGLER_NAME)/'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \ + else :; fi; \ + done + $(mkinstalldirs) $(DESTDIR)$(tooldir)/bin + for i in $(TOOL_PROGS); do \ + if [ -f $$i$(EXEEXT) ]; then \ + j=`echo $$i | sed -e 's/-new//'`; \ + k=`echo $$j | sed '$(transform)'`; \ + if [ "$(bindir)/$$k" != "$(tooldir)/bin/$$j" ]; then \ + rm -f $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT); \ + ln $(DESTDIR)$(bindir)/$$k$(EXEEXT) $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT) >/dev/null 2>/dev/null \ + || $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$i$(EXEEXT) $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT); \ + fi; \ + else true; \ + fi; \ + done |