diff options
Diffstat (limited to 'binutils-2.24/binutils/Makefile.am')
| -rw-r--r-- | binutils-2.24/binutils/Makefile.am | 547 |
1 files changed, 0 insertions, 547 deletions
diff --git a/binutils-2.24/binutils/Makefile.am b/binutils-2.24/binutils/Makefile.am deleted file mode 100644 index e2f86305..00000000 --- a/binutils-2.24/binutils/Makefile.am +++ /dev/null @@ -1,547 +0,0 @@ -## Process this file with automake to generate Makefile.in -# -# Copyright 2012 Free Software Foundation -# -# This file is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 3 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; see the file COPYING3. If not see -# <http://www.gnu.org/licenses/>. -# - -AUTOMAKE_OPTIONS = dejagnu no-dist foreign -ACLOCAL_AMFLAGS = -I .. -I ../config -I ../bfd - -SUBDIRS = doc po - -tooldir = $(exec_prefix)/$(target_alias) - -## These aren't set by automake, because they appear in -## bfd/acinclude.m4, which is included by binutils/acinclude.m4, and -## thus is not seen by automake. -CC_FOR_BUILD = @CC_FOR_BUILD@ -EXEEXT_FOR_BUILD = @EXEEXT_FOR_BUILD@ - -YACC = `if [ -f ../bison/bison ]; then echo ../bison/bison -y -L$(srcdir)/../bison/; else echo @YACC@; fi` -YFLAGS = -d -LEX = `if [ -f ../flex/flex ]; then echo ../flex/flex; else echo @LEX@; fi` -LEXLIB = @LEXLIB@ - -# Automake 1.10+ disables lex and yacc output file regeneration if -# maintainer mode is disabled. Avoid this. -am__skiplex = -am__skipyacc = - -WARN_CFLAGS = @WARN_CFLAGS@ -NO_WERROR = @NO_WERROR@ -AM_CFLAGS = $(WARN_CFLAGS) -LIBICONV = @LIBICONV@ - -# these two are almost the same program -AR_PROG=ar -RANLIB_PROG=ranlib - -# objcopy and strip should be the same program -OBJCOPY_PROG=objcopy -STRIP_PROG=strip-new - -STRINGS_PROG=strings - -READELF_PROG=readelf - -ELFEDIT_PROG=elfedit - -# These should all be the same program too. -SIZE_PROG=size -NM_PROG=nm-new -OBJDUMP_PROG=objdump - -# This is the demangler, as a standalone program. -# Note: This one is used as the installed name too, unlike the above. -DEMANGLER_PROG=cxxfilt - -ADDR2LINE_PROG=addr2line - -NLMCONV_PROG=nlmconv -DLLTOOL_PROG=dlltool -WINDRES_PROG=windres -WINDMC_PROG=windmc -DLLWRAP_PROG=dllwrap - -SRCONV_PROG=srconv$(EXEEXT) sysdump$(EXEEXT) coffdump$(EXEEXT) - -bin_PROGRAMS = $(SIZE_PROG) $(OBJDUMP_PROG) $(AR_PROG) $(STRINGS_PROG) $(RANLIB_PROG) $(OBJCOPY_PROG) @BUILD_NLMCONV@ @BUILD_SRCONV@ @BUILD_DLLTOOL@ @BUILD_WINDRES@ @BUILD_WINDMC@ $(ADDR2LINE_PROG) $(READELF_PROG) $(ELFEDIT_PROG) @BUILD_DLLWRAP@ - -bin_SCRIPTS = @BUILD_INSTALL_MISC@ -EXTRA_SCRIPTS = embedspu - -## Test programs. -BFDTEST1_PROG = bfdtest1 -BFDTEST2_PROG = bfdtest2 - -TEST_PROGS = $(BFDTEST1_PROG) $(BFDTEST2_PROG) - -## We need a special rule to install the programs which are built with -## -new, and to rename cxxfilt to c++filt. -RENAMED_PROGS = $(NM_PROG) $(STRIP_PROG) $(DEMANGLER_PROG) -noinst_PROGRAMS = $(RENAMED_PROGS) $(TEST_PROGS) @BUILD_MISC@ - -EXTRA_PROGRAMS = $(NLMCONV_PROG) srconv sysdump coffdump $(DLLTOOL_PROG) $(WINDRES_PROG) $(WINDMC_PROG) $(DLLWRAP_PROG) - -# Stuff that goes in tooldir/ if appropriate. -TOOL_PROGS = nm-new strip-new ar ranlib dlltool objdump objcopy - -BASEDIR = $(srcdir)/.. -BFDDIR = $(BASEDIR)/bfd -INCDIR = $(BASEDIR)/include - -AM_CPPFLAGS = -I. -I$(srcdir) -I../bfd -I$(BFDDIR) -I$(INCDIR) \ - @HDEFINES@ \ - @INCINTL@ \ - -DLOCALEDIR="\"$(datadir)/locale\"" \ - -Dbin_dummy_emulation=$(EMULATION_VECTOR) - -HFILES = \ - arsup.h binemul.h bucomm.h budbg.h \ - coffgrok.h debug.h dlltool.h dwarf.h elfcomm.h nlmconv.h \ - objdump.h sysdep.h unwind-ia64.h windres.h winduni.h windint.h \ - windmc.h - -GENERATED_HFILES = arparse.h sysroff.h sysinfo.h defparse.h rcparse.h mcparse.h -BUILT_SOURCES = $(GENERATED_HFILES) - -CFILES = \ - addr2line.c ar.c arsup.c bin2c.c binemul.c bucomm.c \ - coffdump.c coffgrok.c cxxfilt.c \ - dwarf.c debug.c dlltool.c dllwrap.c \ - elfcomm.c emul_aix.c emul_vanilla.c filemode.c \ - ieee.c is-ranlib.c is-strip.c maybe-ranlib.c maybe-strip.c \ - nlmconv.c nm.c not-ranlib.c not-strip.c \ - objcopy.c objdump.c prdbg.c \ - od-xcoff.c od-macho.c \ - rclex.c rdcoff.c rddbg.c readelf.c rename.c \ - resbin.c rescoff.c resrc.c resres.c \ - size.c srconv.c stabs.c strings.c sysdump.c \ - syslex_wrap.c unwind-ia64.c elfedit.c version.c \ - windres.c winduni.c wrstabs.c \ - windmc.c mclex.c - -GENERATED_CFILES = \ - arparse.c arlex.c sysroff.c sysinfo.c syslex.c \ - defparse.c deflex.c nlmheader.c rcparse.c mcparse.c - -DEBUG_SRCS = rddbg.c debug.c stabs.c ieee.c rdcoff.c -WRITE_DEBUG_SRCS = $(DEBUG_SRCS) wrstabs.c - -# Extra object files for objdump -OBJDUMP_PRIVATE_OFILES = @OBJDUMP_PRIVATE_OFILES@ - -# Code shared by all the binutils. -BULIBS = bucomm.c version.c filemode.c - -# Code shared by the ELF related programs. -ELFLIBS = elfcomm.c - -BFDLIB = ../bfd/libbfd.la - -OPCODES = ../opcodes/libopcodes.la - -LIBIBERTY = ../libiberty/libiberty.a - -POTFILES = $(CFILES) $(DEBUG_SRCS) $(HFILES) -po/POTFILES.in: @MAINT@ Makefile - for f in $(POTFILES); do echo $$f; done | LC_ALL=C sort > tmp \ - && mv tmp $(srcdir)/po/POTFILES.in - -EXPECT = expect -RUNTEST = runtest - -CC_FOR_TARGET = ` \ - if [ -f $$r/../gcc/xgcc ] ; then \ - if [ -f $$r/../newlib/Makefile ] ; then \ - echo $$r/../gcc/xgcc -B$$r/../gcc/ -idirafter $$r/../newlib/targ-include -idirafter $${srcroot}/../newlib/libc/include -nostdinc; \ - else \ - echo $$r/../gcc/xgcc -B$$r/../gcc/; \ - fi; \ - else \ - if [ "@host@" = "@target@" ] ; then \ - echo $(CC); \ - else \ - echo gcc | sed '$(transform)'; \ - fi; \ - fi` - -check-DEJAGNU: site.exp - srcdir=`cd $(srcdir) && pwd`; export srcdir; \ - r=`pwd`; export r; \ - LC_ALL=C; export LC_ALL; \ - EXPECT=$(EXPECT); export EXPECT; \ - runtest=$(RUNTEST); \ - if $(SHELL) -c "$$runtest --version" > /dev/null 2>&1; then \ - CC_FOR_TARGET="$(CC_FOR_TARGET)" CFLAGS_FOR_TARGET="$(CFLAGS)" \ - $$runtest --tool $(DEJATOOL) --srcdir $${srcdir}/testsuite \ - $(RUNTESTFLAGS); \ - else echo "WARNING: could not find \`runtest'" 1>&2; :;\ - fi - -installcheck-local: - /bin/sh $(srcdir)/sanity.sh $(bindir) - -# There's no global DEPENDENCIES. So, we must explicitly list everything -# which depends on libintl, since we don't know whether LIBINTL_DEP will be -# non-empty until configure time. Ugh! -size_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) -objdump_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) $(OPCODES) $(OBJDUMP_PRIVATE_OFILES) -nm_new_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) -ar_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) -strings_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) -strip_new_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) -ranlib_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) -cxxfilt_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) -objcopy_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) -nlmconv_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) -srconv_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) -sysdump_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) -coffdump_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) -dlltool_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) -windres_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) -windmc_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) -addr2line_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) -readelf_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) -elfedit_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) -dllwrap_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) -bfdtest1_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) -bfdtest2_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) - -LDADD = $(BFDLIB) $(LIBIBERTY) $(LIBINTL) - -size_SOURCES = size.c $(BULIBS) - -objcopy_SOURCES = objcopy.c not-strip.c rename.c $(WRITE_DEBUG_SRCS) $(BULIBS) - -strings_SOURCES = strings.c $(BULIBS) - -readelf_SOURCES = readelf.c version.c unwind-ia64.c dwarf.c $(ELFLIBS) -readelf_LDADD = $(LIBINTL) $(LIBIBERTY) - -elfedit_SOURCES = elfedit.c version.c $(ELFLIBS) -elfedit_LDADD = $(LIBINTL) $(LIBIBERTY) - -strip_new_SOURCES = objcopy.c is-strip.c rename.c $(WRITE_DEBUG_SRCS) $(BULIBS) - -nm_new_SOURCES = nm.c $(BULIBS) - -objdump_SOURCES = objdump.c dwarf.c prdbg.c $(DEBUG_SRCS) $(BULIBS) $(ELFLIBS) -EXTRA_objdump_SOURCES = od-xcoff.c -objdump_LDADD = $(OBJDUMP_PRIVATE_OFILES) $(OPCODES) $(BFDLIB) $(LIBIBERTY) $(LIBINTL) - -objdump.@OBJEXT@:objdump.c -if am__fastdepCC - $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(OBJDUMP_DEFS) $(srcdir)/objdump.c - mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -else -if AMDEP - source='objdump.c' object='$@' libtool=no @AMDEPBACKSLASH@ - DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -endif - $(COMPILE) -c $(OBJDUMP_DEFS) $(srcdir)/objdump.c -endif - -cxxfilt_SOURCES = cxxfilt.c $(BULIBS) - -ar_SOURCES = arparse.y arlex.l ar.c not-ranlib.c arsup.c rename.c binemul.c \ - emul_$(EMULATION).c $(BULIBS) -EXTRA_ar_SOURCES = $(CFILES) -ar_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL) - -ranlib_SOURCES = ar.c is-ranlib.c arparse.y arlex.l arsup.c rename.c \ - binemul.c emul_$(EMULATION).c $(BULIBS) -ranlib_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL) - -addr2line_SOURCES = addr2line.c $(BULIBS) - -# The following is commented out for the conversion to automake. -# This rule creates a single binary that switches between ar and ranlib -# by looking at argv[0]. Use this kludge to save some disk space. -# However, you have to install things by hand. -# (That is after 'make install', replace the installed ranlib by a link to ar.) -# Alternatively, you can install ranlib.sh as ranlib. -# ar_with_ranlib: $(ADDL_DEPS) ar.o maybe-ranlib.o -# $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(AR_PROG) ar.o maybe-ranlib.o $(ADDL_LIBS) $(EXTRALIBS) -# -rm -f $(RANLIB_PROG) -# -ln $(AR_PROG) $(RANLIB_PROG) -# -# objcopy and strip in one binary that uses argv[0] to decide its action. -# -#objcopy_with_strip: $(ADDL_DEPS) objcopy.o maybe-strip.o -# $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(OBJCOPY_PROG) objcopy.o maybe-strip.o $(ADDL_LIBS) $(EXTRALIBS) -# -rm -f $(STRIP_PROG) -# -ln $(OBJCOPY_PROG) $(STRIP_PROG) - -sysroff.c: sysinfo$(EXEEXT_FOR_BUILD) sysroff.info - ./sysinfo$(EXEEXT_FOR_BUILD) -c <$(srcdir)/sysroff.info >sysroff.c - ./sysinfo$(EXEEXT_FOR_BUILD) -i <$(srcdir)/sysroff.info >>sysroff.c - ./sysinfo$(EXEEXT_FOR_BUILD) -g <$(srcdir)/sysroff.info >>sysroff.c - -sysroff.h: sysinfo$(EXEEXT_FOR_BUILD) sysroff.info - ./sysinfo$(EXEEXT_FOR_BUILD) -d <$(srcdir)/sysroff.info >sysroff.h - -sysinfo$(EXEEXT_FOR_BUILD): sysinfo.@OBJEXT@ syslex_wrap.@OBJEXT@ - $(CC_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) -o $@ sysinfo.@OBJEXT@ syslex_wrap.@OBJEXT@ - -syslex_wrap.@OBJEXT@: syslex_wrap.c syslex.c sysinfo.h config.h - $(CC_FOR_BUILD) -c -I. -I$(srcdir) $(AM_CFLAGS) $(CFLAGS_FOR_BUILD) $(NO_WERROR) $(srcdir)/syslex_wrap.c - -sysinfo.@OBJEXT@: sysinfo.c - if [ -r sysinfo.c ]; then \ - $(CC_FOR_BUILD) -c -I. $(AM_CFLAGS) $(CFLAGS_FOR_BUILD) $(NO_WERROR) sysinfo.c ; \ - else \ - $(CC_FOR_BUILD) -c -I. $(AM_CFLAGS) $(CFLAGS_FOR_BUILD) $(NO_WERROR) $(srcdir)/sysinfo.c ; \ - fi - -bin2c$(EXEEXT_FOR_BUILD): bin2c.c - $(CC_FOR_BUILD) -o $@ $(AM_CPPFLAGS) $(AM_CFLAGS) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) $(srcdir)/bin2c.c - -embedspu: embedspu.sh Makefile - awk '/^program_transform_name=/ {print "program_transform_name=\"$(program_transform_name)\""; next} {print}' < $< > $@ - chmod a+x $@ - -# We need these for parallel make. -sysinfo.h: sysinfo.c - -# Disable -Werror, if it has been enabled, since old versions of bison/ -# yacc will produce working code which contain compile time warnings. -arparse.@OBJEXT@: arparse.c -if am__fastdepCC - $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f arparse.c || echo $(srcdir)/`arparse.c $(NO_WERROR) - mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -else -if AMDEP - source='arparse.c' object='$@' libtool=no @AMDEPBACKSLASH@ - DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -endif - $(COMPILE) -c `test -f arparse.c || echo $(srcdir)/`arparse.c $(NO_WERROR) -endif - -arlex.@OBJEXT@: arlex.c -if am__fastdepCC - $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f arlex.c || echo $(srcdir)/`arlex.c $(NO_WERROR) - mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -else -if AMDEP - source='arlex.c' object='$@' libtool=no @AMDEPBACKSLASH@ - DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -endif - $(COMPILE) -c `test -f arlex.c || echo $(srcdir)/`arlex.c $(NO_WERROR) -endif - -sysroff.@OBJEXT@: sysroff.c -if am__fastdepCC - $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f sysroff.c || echo $(srcdir)/`sysroff.c $(NO_WERROR) - mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -else -if AMDEP - source='sysroff.c' object='$@' libtool=no @AMDEPBACKSLASH@ - DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -endif - $(COMPILE) -c `test -f sysroff.c || echo $(srcdir)/`sysroff.c $(NO_WERROR) -endif - -defparse.@OBJEXT@: defparse.c -if am__fastdepCC - $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f defparse.c || echo $(srcdir)/`defparse.c $(NO_WERROR) - mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -else -if AMDEP - source='defparse.c' object='$@' libtool=no @AMDEPBACKSLASH@ - DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -endif - $(COMPILE) -c `test -f defparse.c || echo $(srcdir)/`defparse.c $(NO_WERROR) -endif - -deflex.@OBJEXT@: deflex.c -if am__fastdepCC - $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR) - mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -else -if AMDEP - source='deflex.c' object='$@' libtool=no @AMDEPBACKSLASH@ - DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -endif - $(COMPILE) -c `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR) -endif - -nlmheader.@OBJEXT@: nlmheader.c -if am__fastdepCC - $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f nlmheader.c || echo $(srcdir)/`nlmheader.c $(NO_WERROR) - mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -else -if AMDEP - source='nlmheader.c' object='$@' libtool=no @AMDEPBACKSLASH@ - DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -endif - $(COMPILE) -c `test -f nlmheader.c || echo $(srcdir)/`nlmheader.c $(NO_WERROR) -endif - -rcparse.@OBJEXT@: rcparse.c -if am__fastdepCC - $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR) - mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -else -if AMDEP - source='rcparse.c' object='$@' libtool=no @AMDEPBACKSLASH@ - DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -endif - $(COMPILE) -c `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR) -endif - -mcparse.@OBJEXT@: mcparse.c -if am__fastdepCC - $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f mcparse.c || echo $(srcdir)/`mcparse.c $(NO_WERROR) - mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -else -if AMDEP - source='mcparse.c' object='$@' libtool=no @AMDEPBACKSLASH@ - DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -endif - $(COMPILE) -c `test -f mcparse.c || echo $(srcdir)/`mcparse.c $(NO_WERROR) -endif - -rclex.@OBJEXT@: rclex.c -if am__fastdepCC - $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/rclex.c $(NO_WERROR) - mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -else -if AMDEP - source='rclex.c' object='$@' libtool=no @AMDEPBACKSLASH@ - DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -endif - $(COMPILE) -c $(srcdir)/rclex.c $(NO_WERROR) -endif - -mclex.@OBJEXT@: mclex.c -if am__fastdepCC - $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/mclex.c $(NO_WERROR) - mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -else -if AMDEP - source='mclex.c' object='$@' libtool=no @AMDEPBACKSLASH@ - DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -endif - $(COMPILE) -c $(srcdir)/mclex.c $(NO_WERROR) -endif - -srconv_SOURCES = srconv.c coffgrok.c $(BULIBS) -srconv.@OBJEXT@: sysroff.c - -dlltool_SOURCES = dlltool.c defparse.y deflex.l $(BULIBS) -dlltool_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL) - -dlltool.@OBJEXT@: -if am__fastdepCC - $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(DLLTOOL_DEFS) $(srcdir)/dlltool.c - mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -else -if AMDEP - source='dlltool.c' object='$@' libtool=no @AMDEPBACKSLASH@ - DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -endif - $(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/dlltool.c -endif - -rescoff.@OBJEXT@: -if am__fastdepCC - $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(DLLTOOL_DEFS) $(srcdir)/rescoff.c - mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -else -if AMDEP - source='rescoff.c' object='$@' libtool=no @AMDEPBACKSLASH@ - DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -endif - $(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/rescoff.c -endif - -coffdump_SOURCES = coffdump.c coffgrok.c $(BULIBS) - -sysdump_SOURCES = sysdump.c $(BULIBS) -sysdump.@OBJEXT@: sysroff.c - -# coff/sym.h and coff/ecoff.h won't be found by the automatic dependency -# scripts, since they are only included conditionally. -nlmconv.@OBJEXT@: nlmconv.c -if am__fastdepCC - ldname=`echo ld | sed '$(transform)'`; \ - $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ \ - -DLD_NAME="\"$${ldname}\"" @NLMCONV_DEFS@ $(srcdir)/nlmconv.c - mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -else -if AMDEP - source='nlmconv.c' object='$@' libtool=no @AMDEPBACKSLASH@ - DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -endif - ldname=`echo ld | sed '$(transform)'`; \ - $(COMPILE) -c -DLD_NAME="\"$${ldname}\"" @NLMCONV_DEFS@ $(srcdir)/nlmconv.c -endif - -nlmconv_SOURCES = nlmconv.c nlmheader.y $(BULIBS) - -windres_SOURCES = windres.c resrc.c rescoff.c resbin.c rcparse.y rclex.c \ - winduni.c resres.c $(BULIBS) -windres_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL) $(LIBICONV) - -windmc_SOURCES = windmc.c mcparse.y mclex.c \ - winduni.c $(BULIBS) -windmc_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL) $(LIBICONV) - -dllwrap_SOURCES = dllwrap.c version.c -dllwrap_LDADD = $(LIBIBERTY) $(LIBINTL) - - -EXTRA_DIST = arparse.c arparse.h arlex.c nlmheader.c sysinfo.c sysinfo.h \ - syslex.c deflex.c defparse.h defparse.c rcparse.h rcparse.c \ - mcparse.h mcparse.c embedspu.sh - -diststuff: $(EXTRA_DIST) info -all: info - -# We extract version from bfd/configure.in, make sure to rerun configure -# when BFD's version changes. -CONFIG_STATUS_DEPENDENCIES = $(BFDDIR)/configure.in - -DISTCLEANFILES = sysroff.c sysroff.h site.exp site.bak embedspu - -MOSTLYCLEANFILES = sysinfo$(EXEEXT_FOR_BUILD) bin2c$(EXEEXT_FOR_BUILD) \ - binutils.log binutils.sum abcdefgh* -mostlyclean-local: - -rm -rf tmpdir - -.PHONY: install-exec-local - -install-exec-local: install-binPROGRAMS $(bin_PROGRAMS) $(noinst_PROGRAMS) - @list='$(RENAMED_PROGS)'; for p in $$list; do \ - if test -f $$p$(EXEEXT); then \ - echo " $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p$(EXEEXT) $(bindir)/`echo $$p|sed -e 's/-new//' -e 's/cxxfilt/$(DEMANGLER_NAME)/'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \ - $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p$(EXEEXT) $(DESTDIR)$(bindir)/`echo $$p|sed -e 's/-new//' -e 's/cxxfilt/$(DEMANGLER_NAME)/'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \ - else :; fi; \ - done - $(mkinstalldirs) $(DESTDIR)$(tooldir)/bin - for i in $(TOOL_PROGS); do \ - if [ -f $$i$(EXEEXT) ]; then \ - j=`echo $$i | sed -e 's/-new//'`; \ - k=`echo $$j | sed '$(transform)'`; \ - if [ "$(bindir)/$$k" != "$(tooldir)/bin/$$j" ]; then \ - rm -f $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT); \ - ln $(DESTDIR)$(bindir)/$$k$(EXEEXT) $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT) >/dev/null 2>/dev/null \ - || $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$i$(EXEEXT) $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT); \ - fi; \ - else true; \ - fi; \ - done |