diff options
Diffstat (limited to 'binutils-2.24/bfd/mep-relocs.pl')
-rwxr-xr-x | binutils-2.24/bfd/mep-relocs.pl | 275 |
1 files changed, 0 insertions, 275 deletions
diff --git a/binutils-2.24/bfd/mep-relocs.pl b/binutils-2.24/bfd/mep-relocs.pl deleted file mode 100755 index a4f10d38..00000000 --- a/binutils-2.24/bfd/mep-relocs.pl +++ /dev/null @@ -1,275 +0,0 @@ -#!/usr/bin/perl -# -*- perl -*- -# -# Toshiba MeP Media Engine Relocation Generator -# Copyright (C) 2001, 2007 Free Software Foundation, Inc. -# This file is part of BFD. -# Originally written by DJ Delorie <dj@redhat.com> -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 3 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, -# MA 02110-1301, USA. - - -# Usage: Run this anywhere inside your source tree. It will read -# include/elf/mep.h and scan the comments therein. It will renumber -# the relocs to be sequential (this is needed so that bfd/elf32-mep.h -# works) if needed. It will then update the reloc list in bfd/reloc.c -# and the howto, mapping, and apply routines in bfd/elf32-mep.c. You -# can then regenerate bfd-in2.h and check everything in. - -# FIXME: After the relocation list is finalized, change this to -# *verify* the reloc list, rather than resequence it. - -while (! -f "include/elf/mep.h" && ! -f "bfd/reloc.c") { - chdir ".."; - $pwd = `pwd`; - if ($pwd !~ m@/.*/@) { - print STDERR "Cannot find include/elf/mep.h or bfd/reloc.h\n"; - exit 1; - } -} -$pwd = `pwd`; -print "srctop is $pwd"; - -printf "Reading include/elf/mep.h ...\n"; -open(MEPH, "include/elf/mep.h"); -open(MEPHO, "> include/elf/mep.h.new") || die("mep.h.new create: $!"); -$val = 0; -while (<MEPH>) { - if (($pre,$rel,$rest) = /(.*RELOC_NUMBER \()([^,]+), *\d+(.*)/) { - $rest =~ s/[\r\n]+$//; - print (MEPHO "$pre$rel, $val$rest\n") || die("mep.h.new write: $!"); - $val ++; - $rel =~ s/R_MEP_//; - push(@relocs, $rel); - - $rest =~ s@.*/\* @@; - ($pattern, $sign, $attrs) = $rest =~ m@(.*) ([US]) (.*)\*/@; - $pattern =~ s/ //g; - push(@pattern, $pattern); - push(@sign, $sign); - push(@attrs, $attrs); - - printf "%4d $rel p=`$pattern' s=`$sign' a=`$attrs'\n", $#pattern; - - } else { - print(MEPHO) || die("mep.h.new write: $!"); - } -} -close(MEPH); -close(MEPHO) || die("mep.h.new close: $!"); - -&swapfile("include/elf/mep.h"); - -redo_file ("bfd/reloc.c", - "", - "ENUMDOC\n Toshiba Media Processor Relocations.\n\nCOMMENT\n", - "ENUM\n BFD_RELOC_MEP_%s\n", - ""); - -$autogen = " /* This section generated from bfd/mep-relocs.pl from include/elf/mep.h. */\n"; - -redo_file ("bfd/elf32-mep.c", - "MEPRELOC:HOWTO", - $autogen, - "MEPRELOC:END", - "", - "&emit_howto();", - "MEPRELOC:MAP", - $autogen, - "MEPRELOC:END", - "", - " MAP(%s);\n", - "MEPRELOC:APPLY", - $autogen, - "MEPRELOC:END", - "", - "&emit_apply();", - ); - -sub mask2shifts { - my ($mask) = @_; - my ($bits, $left, $right, $ci, $c, $cv); - $bits = 0; - $left = 0; - $right = 32; - for ($ci=0; $ci<length($mask); $ci++) { - $c = substr($mask, $ci, 1); - $left++; - next if $c eq '-'; - $left = 0; - $cv = ord($c) - ord('0'); - $cv -= ord('a') - ord('9') - 1 if $cv > 9; - $right = $cv unless $right < $cv; - $bits = $cv+1 unless $bits > $cv+1; - } - $mask =~ tr/-/1/c; - $mask =~ tr/-/0/; - ($rmask = $mask) =~ tr/01/10/; - $mask = unpack("H*", pack("B*", $mask)); - $rmask = unpack("H*", pack("B*", $rmask)); - return ($bits, $left, $right, $mask, $rmask); -} - -sub emit_howto { - for ($i=2; $i<=$#relocs; $i++) { - $mask = $pattern[$i]; - - if (length($mask) == 8) { $bytesize = 0; } - elsif (length($mask) == 16) { $bytesize = 1; } - elsif (length($mask) == 32) { $bytesize = 2; } - - ($bits, $left, $right, $mask) = mask2shifts ($mask); - $bits[$i] = $bits; - $pcrel = 0; - $pcrel = 1 if $attrs[$i] =~ /pc-rel/i; - $overflow = $sign[$i]; - $overflow = 'N' if $attrs[$i] =~ /no-overflow/; - - $c = "$relocs[$i],"; - printf(NEW " MEPREL (R_MEP_%-10s%d,%3d,%2d,%2d,%2d,%2s, 0x%s),\n", - $c, $bytesize, $bits, $left, $right, $pcrel, $overflow, $mask); - } -} - -sub emit_apply { - for ($i=2; $i<=$#relocs; $i++) { - $v = "u"; - $v = "s" if $sign[$i] =~ /S/; - if (length($pattern[$i]) == 8) { - $e = ''; # no endian swap for bytes - } elsif ($pattern[$i] =~ /-/ || length($pattern[$i]) == 16) { - $e = '^e2'; # endian swap - 2byte words only - } else { - $e = '^e4' # endian swap for data - } - print NEW " case R_MEP_$relocs[$i]: /* $pattern[$i] */\n"; - if ($attrs[$i] =~ /tp-rel/i) { - print NEW " $v -= mep_tpoff_base(rel->r_offset);\n"; - } - if ($attrs[$i] =~ /gp-rel/i) { - print NEW " $v -= mep_sdaoff_base(rel->r_offset);\n"; - } - if ($attrs[$i] !~ /no-overflow/ && $bits[$i] < 32) { - if ($v eq "u") { - $max = (1 << $bits[$i]) - 1; - print NEW " if (u > $max) r = bfd_reloc_overflow;\n"; - } else { - $min = -(1 << ($bits[$i]-1)); - $max = (1 << ($bits[$i]-1)) - 1; - print NEW " if ($min > s || s > $max) r = bfd_reloc_overflow;\n"; - } - } - for ($b=0; $b<length($pattern[$i]); $b += 8) { - $mask = substr($pattern[$i], $b, 8); - ($bits, $left, $right, $mask, $rmask) = mask2shifts ($mask); - if ($left > $right) { $left -= $right; $right = 0; } - else { $right -= $left; $left = 0; } - - if ($mask ne "00") { - $bb = $b / 8; - print NEW " byte[$bb$e] = "; - print NEW "(byte[$bb$e] & 0x$rmask) | " if $rmask ne "00"; - if ($left) { - print NEW "(($v << $left) & 0x$mask)"; - } elsif ($right) { - print NEW "(($v >> $right) & 0x$mask)"; - } else { - print NEW "($v & 0x$mask)"; - } - print NEW ";\n"; - } - } - print NEW " break;\n"; - } -} - - -#----------------------------------------------------------------------------- - -sub redo_file { - my ($file, @control) = @_; - open(OLD, $file); - open(NEW, "> $file.new") || die("$file.new create: $!"); - - print "Scanning file $file ...\n"; - - while (1) { - $start = shift @control; - $prefix = shift @control; - $end = shift @control; - $suffix = shift @control; - $pattern = shift @control; - - if (!$start) { - print NEW while <OLD>; - last; - } - - print " looking for $start\n"; - while (<OLD>) { - print NEW; - last if /\Q$start\E/; - } - print "can't find $start\n" unless $_; - last unless $_; - - print NEW $prefix; - if ($pattern =~ /^\&/) { - eval $pattern; - die("$pattern: $@") if $@; - } else { - for $i (2..$#relocs) { - printf (NEW "$pattern", $relocs[$i]) || die("$file.new write: $!"); - $pattern =~ s/^ENUM\n/ENUMX\n/; - } - } - print NEW $suffix; - while (<OLD>) { - last if /\Q$end\E/; - } - print NEW; - } - - close(OLD); - close(NEW) || die("$file.new close: $!"); - &swapfile($file); -} - -#----------------------------------------------------------------------------- - -sub swapfile { - my ($f) = @_; - if ( ! -f "$f.save") { - system "cp $f $f.save"; - } - open(ORIG, $f); - open(NEW, "$f.new"); - while (<ORIG>) { - $n = <NEW>; - if ($n ne $_) { - close(ORIG); - close(NEW); - print " Updating $f\n"; - rename "$f", "$f.old"; - rename "$f.new", "$f"; - return; - } - } - close(ORIG); - close(NEW); - print " No change to $f\n"; - unlink "$f.new"; -} |