diff options
Diffstat (limited to 'binutils-2.17/gas/config/tc-i370.c')
| -rw-r--r-- | binutils-2.17/gas/config/tc-i370.c | 2712 |
1 files changed, 0 insertions, 2712 deletions
diff --git a/binutils-2.17/gas/config/tc-i370.c b/binutils-2.17/gas/config/tc-i370.c deleted file mode 100644 index d87d2d9f..00000000 --- a/binutils-2.17/gas/config/tc-i370.c +++ /dev/null @@ -1,2712 +0,0 @@ -/* tc-i370.c -- Assembler for the IBM 360/370/390 instruction set. - Loosely based on the ppc files by Linas Vepstas <linas@linas.org> 1998, 99 - Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, - 2004, 2005, 2006 Free Software Foundation, Inc. - Written by Ian Lance Taylor, Cygnus Support. - - This file is part of GAS, the GNU Assembler. - - GAS is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - - GAS is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with GAS; see the file COPYING. If not, write to the Free - Software Foundation, 51 Franklin Street - Fifth Floor, Boston, MA - 02110-1301, USA. */ - -/* This assembler implements a very hacked version of an elf-like thing - that gcc emits (when gcc is suitably hacked). To make it behave more - HLASM-like, try turning on the -M or --mri flag (as there are various - similarities between HLASM and the MRI assemblers, such as section - names, lack of leading . in pseudo-ops, DC and DS, etc. */ - -#include <stdio.h> -#include "as.h" -#include "safe-ctype.h" -#include "subsegs.h" -#include "struc-symbol.h" - -#include "opcode/i370.h" - -#ifdef OBJ_ELF -#include "elf/i370.h" -#endif - -/* This is the assembler for the System/390 Architecture. */ - -/* Tell the main code what the endianness is. */ -extern int target_big_endian; - - -/* Generic assembler global variables which must be defined by all - targets. */ - -#ifdef OBJ_ELF -/* This string holds the chars that always start a comment. If the - pre-processor is disabled, these aren't very useful. The macro - tc_comment_chars points to this. We use this, rather than the - usual comment_chars, so that we can switch for Solaris conventions. */ -static const char i370_eabi_comment_chars[] = "#"; - -const char *i370_comment_chars = i370_eabi_comment_chars; -#else -const char comment_chars[] = "#"; -#endif - -/* Characters which start a comment at the beginning of a line. */ -const char line_comment_chars[] = "#*"; - -/* Characters which may be used to separate multiple commands on a - single line. */ -const char line_separator_chars[] = ";"; - -/* Characters which are used to indicate an exponent in a floating - point number. */ -const char EXP_CHARS[] = "eE"; - -/* Characters which mean that a number is a floating point constant, - as in 0d1.0. */ -const char FLT_CHARS[] = "dD"; - -void -md_show_usage (FILE *stream) -{ - fprintf (stream, "\ -S/370 options: (these have not yet been tested and may not work) \n\ --u ignored\n\ --mregnames Allow symbolic names for registers\n\ --mno-regnames Do not allow symbolic names for registers\n"); -#ifdef OBJ_ELF - fprintf (stream, "\ --mrelocatable support for GCC's -mrelocatble option\n\ --mrelocatable-lib support for GCC's -mrelocatble-lib option\n\ --V print assembler version number\n"); -#endif -} - -/* Whether to use user friendly register names. */ -#define TARGET_REG_NAMES_P TRUE - -static bfd_boolean reg_names_p = TARGET_REG_NAMES_P; - - -/* Predefined register names if -mregnames - In general, there are lots of them, in an attempt to be compatible - with a number of assemblers. */ - -/* Structure to hold information about predefined registers. */ -struct pd_reg - { - char *name; - int value; - }; - -/* List of registers that are pre-defined: - - Each general register has predefined names of the form: - 1. r<reg_num> which has the value <reg_num>. - 2. r.<reg_num> which has the value <reg_num>. - - Each floating point register has predefined names of the form: - 1. f<reg_num> which has the value <reg_num>. - 2. f.<reg_num> which has the value <reg_num>. - - There are only four floating point registers, and these are - commonly labelled 0,2,4 and 6. Thus, there is no f1, f3, etc. - - There are individual registers as well: - rbase or r.base has the value 3 (base register) - rpgt or r.pgt has the value 4 (page origin table pointer) - rarg or r.arg has the value 11 (argument pointer) - rtca or r.tca has the value 12 (table of contents pointer) - rtoc or r.toc has the value 12 (table of contents pointer) - sp or r.sp has the value 13 (stack pointer) - dsa or r.dsa has the value 13 (stack pointer) - lr has the value 14 (link reg) - - The table is sorted. Suitable for searching by a binary search. */ - -static const struct pd_reg pre_defined_registers[] = -{ - { "arg", 11 }, /* Argument Pointer. */ - { "base", 3 }, /* Base Reg. */ - - { "f.0", 0 }, /* Floating point registers. */ - { "f.2", 2 }, - { "f.4", 4 }, - { "f.6", 6 }, - - { "f0", 0 }, - { "f2", 2 }, - { "f4", 4 }, - { "f6", 6 }, - - { "dsa",13 }, /* Stack pointer. */ - { "lr", 14 }, /* Link Register. */ - { "pgt", 4 }, /* Page Origin Table Pointer. */ - - { "r.0", 0 }, /* General Purpose Registers. */ - { "r.1", 1 }, - { "r.10", 10 }, - { "r.11", 11 }, - { "r.12", 12 }, - { "r.13", 13 }, - { "r.14", 14 }, - { "r.15", 15 }, - { "r.2", 2 }, - { "r.3", 3 }, - { "r.4", 4 }, - { "r.5", 5 }, - { "r.6", 6 }, - { "r.7", 7 }, - { "r.8", 8 }, - { "r.9", 9 }, - - { "r.arg", 11 }, /* Argument Pointer. */ - { "r.base", 3 }, /* Base Reg. */ - { "r.dsa", 13 }, /* Stack Pointer. */ - { "r.pgt", 4 }, /* Page Origin Table Pointer. */ - { "r.sp", 13 }, /* Stack Pointer. */ - - { "r.tca", 12 }, /* Pointer to the table of contents. */ - { "r.toc", 12 }, /* Pointer to the table of contents. */ - - { "r0", 0 }, /* More general purpose registers. */ - { "r1", 1 }, - { "r10", 10 }, - { "r11", 11 }, - { "r12", 12 }, - { "r13", 13 }, - { "r14", 14 }, - { "r15", 15 }, - { "r2", 2 }, - { "r3", 3 }, - { "r4", 4 }, - { "r5", 5 }, - { "r6", 6 }, - { "r7", 7 }, - { "r8", 8 }, - { "r9", 9 }, - - { "rbase", 3 }, /* Base Reg. */ - - { "rtca", 12 }, /* Pointer to the table of contents. */ - { "rtoc", 12 }, /* Pointer to the table of contents. */ - - { "sp", 13 }, /* Stack Pointer. */ - -}; - -#define REG_NAME_CNT (sizeof (pre_defined_registers) / sizeof (struct pd_reg)) - -/* Given NAME, find the register number associated with that name, return - the integer value associated with the given name or -1 on failure. */ - -static int -reg_name_search (const struct pd_reg *regs, - int regcount, - const char *name) -{ - int middle, low, high; - int cmp; - - low = 0; - high = regcount - 1; - - do - { - middle = (low + high) / 2; - cmp = strcasecmp (name, regs[middle].name); - if (cmp < 0) - high = middle - 1; - else if (cmp > 0) - low = middle + 1; - else - return regs[middle].value; - } - while (low <= high); - - return -1; -} - -/* Summary of register_name(). - - in: Input_line_pointer points to 1st char of operand. - - out: An expressionS. - The operand may have been a register: in this case, X_op == O_register, - X_add_number is set to the register number, and truth is returned. - Input_line_pointer->(next non-blank) char after operand, or is in its - original state. */ - -static bfd_boolean -register_name (expressionS *expressionP) -{ - int reg_number; - char *name; - char *start; - char c; - - /* Find the spelling of the operand. */ - start = name = input_line_pointer; - if (name[0] == '%' && ISALPHA (name[1])) - name = ++input_line_pointer; - - else if (!reg_names_p) - return FALSE; - - while (' ' == *name) - name = ++input_line_pointer; - - /* If it's a number, treat it as a number. If it's alpha, look to - see if it's in the register table. */ - if (!ISALPHA (name[0])) - reg_number = get_single_number (); - else - { - c = get_symbol_end (); - reg_number = reg_name_search (pre_defined_registers, REG_NAME_CNT, name); - - /* Put back the delimiting char. */ - *input_line_pointer = c; - } - - /* If numeric, make sure its not out of bounds. */ - if ((0 <= reg_number) && (16 >= reg_number)) - { - expressionP->X_op = O_register; - expressionP->X_add_number = reg_number; - - /* Make the rest nice. */ - expressionP->X_add_symbol = NULL; - expressionP->X_op_symbol = NULL; - return TRUE; - } - - /* Reset the line as if we had not done anything. */ - input_line_pointer = start; - return FALSE; -} - -/* Local variables. */ - -/* The type of processor we are assembling for. This is one or more - of the I370_OPCODE flags defined in opcode/i370.h. */ -static int i370_cpu = 0; - -/* The base register to use for opcode with optional operands. - We define two of these: "text" and "other". Normally, "text" - would get used in the .text section for branches, while "other" - gets used in the .data section for address constants. - - The idea of a second base register in a different section - is foreign to the usual HLASM-style semantics; however, it - allows us to provide support for dynamically loaded libraries, - by allowing us to place address constants in a section other - than the text section. The "other" section need not be the - .data section, it can be any section that isn't the .text section. - - Note that HLASM defines a multiple, concurrent .using semantic - that we do not: in calculating offsets, it uses either the most - recent .using directive, or the one with the smallest displacement. - This allows HLASM to support a quasi-block-scope-like behaviour. - Handy for people writing assembly by hand ... but not supported - by us. */ -static int i370_using_text_regno = -1; -static int i370_using_other_regno = -1; - -/* The base address for address literals. */ -static expressionS i370_using_text_baseaddr; -static expressionS i370_using_other_baseaddr; - -/* the "other" section, used only for syntax error detection. */ -static segT i370_other_section = undefined_section; - -/* Opcode hash table. */ -static struct hash_control *i370_hash; - -/* Macro hash table. */ -static struct hash_control *i370_macro_hash; - -#ifdef OBJ_ELF -/* What type of shared library support to use. */ -static enum { SHLIB_NONE, SHLIB_PIC, SHILB_MRELOCATABLE } shlib = SHLIB_NONE; -#endif - -/* Flags to set in the elf header. */ -static flagword i370_flags = 0; - -#ifndef WORKING_DOT_WORD -int md_short_jump_size = 4; -int md_long_jump_size = 4; -#endif - -#ifdef OBJ_ELF -const char *md_shortopts = "l:um:K:VQ:"; -#else -const char *md_shortopts = "um:"; -#endif -struct option md_longopts[] = -{ - {NULL, no_argument, NULL, 0} -}; -size_t md_longopts_size = sizeof (md_longopts); - -int -md_parse_option (int c, char *arg) -{ - switch (c) - { - case 'u': - /* -u means that any undefined symbols should be treated as - external, which is the default for gas anyhow. */ - break; - -#ifdef OBJ_ELF - case 'K': - /* Recognize -K PIC */ - if (strcmp (arg, "PIC") == 0 || strcmp (arg, "pic") == 0) - { - shlib = SHLIB_PIC; - i370_flags |= EF_I370_RELOCATABLE_LIB; - } - else - return 0; - - break; -#endif - - case 'm': - - /* -m360 mean to assemble for the ancient 360 architecture. */ - if (strcmp (arg, "360") == 0 || strcmp (arg, "i360") == 0) - i370_cpu = I370_OPCODE_360; - /* -mxa means to assemble for the IBM 370 XA. */ - else if (strcmp (arg, "xa") == 0) - i370_cpu = I370_OPCODE_370_XA; - /* -many means to assemble for any architecture (370/XA). */ - else if (strcmp (arg, "any") == 0) - i370_cpu = I370_OPCODE_370; - - else if (strcmp (arg, "regnames") == 0) - reg_names_p = TRUE; - - else if (strcmp (arg, "no-regnames") == 0) - reg_names_p = FALSE; - -#ifdef OBJ_ELF - /* -mrelocatable/-mrelocatable-lib -- warn about - initializations that require relocation. */ - else if (strcmp (arg, "relocatable") == 0) - { - shlib = SHILB_MRELOCATABLE; - i370_flags |= EF_I370_RELOCATABLE; - } - else if (strcmp (arg, "relocatable-lib") == 0) - { - shlib = SHILB_MRELOCATABLE; - i370_flags |= EF_I370_RELOCATABLE_LIB; - } -#endif - else - { - as_bad ("invalid switch -m%s", arg); - return 0; - } - break; - -#ifdef OBJ_ELF - /* -V: SVR4 argument to print version ID. */ - case 'V': - print_version_id (); - break; - - /* -Qy, -Qn: SVR4 arguments controlling whether a .comment section - should be emitted or not. FIXME: Not implemented. */ - case 'Q': - break; - -#endif - - default: - return 0; - } - - return 1; -} - - -/* Set i370_cpu if it is not already set. - Currently defaults to the reasonable superset; - but can be made more fine grained if desred. */ - -static void -i370_set_cpu (void) -{ - const char *default_os = TARGET_OS; - const char *default_cpu = TARGET_CPU; - - /* Override with the superset for the moment. */ - i370_cpu = I370_OPCODE_ESA390_SUPERSET; - if (i370_cpu == 0) - { - if (strcmp (default_cpu, "i360") == 0) - i370_cpu = I370_OPCODE_360; - else if (strcmp (default_cpu, "i370") == 0) - i370_cpu = I370_OPCODE_370; - else if (strcmp (default_cpu, "XA") == 0) - i370_cpu = I370_OPCODE_370_XA; - else - as_fatal ("Unknown default cpu = %s, os = %s", default_cpu, default_os); - } -} - -/* Figure out the BFD architecture to use. - FIXME: specify the different 370 architectures. */ - -enum bfd_architecture -i370_arch (void) -{ - return bfd_arch_i370; -} - -/* This function is called when the assembler starts up. It is called - after the options have been parsed and the output file has been - opened. */ - -void -md_begin (void) -{ - const struct i370_opcode *op; - const struct i370_opcode *op_end; - const struct i370_macro *macro; - const struct i370_macro *macro_end; - bfd_boolean dup_insn = FALSE; - - i370_set_cpu (); - -#ifdef OBJ_ELF - /* Set the ELF flags if desired. */ - if (i370_flags) - bfd_set_private_flags (stdoutput, i370_flags); -#endif - - /* Insert the opcodes into a hash table. */ - i370_hash = hash_new (); - - op_end = i370_opcodes + i370_num_opcodes; - for (op = i370_opcodes; op < op_end; op++) - { - know ((op->opcode.i[0] & op->mask.i[0]) == op->opcode.i[0] - && (op->opcode.i[1] & op->mask.i[1]) == op->opcode.i[1]); - - if ((op->flags & i370_cpu) != 0) - { - const char *retval; - - retval = hash_insert (i370_hash, op->name, (void *) op); - if (retval != (const char *) NULL) - { - as_bad ("Internal assembler error for instruction %s", op->name); - dup_insn = TRUE; - } - } - } - - /* Insert the macros into a hash table. */ - i370_macro_hash = hash_new (); - - macro_end = i370_macros + i370_num_macros; - for (macro = i370_macros; macro < macro_end; macro++) - { - if ((macro->flags & i370_cpu) != 0) - { - const char *retval; - - retval = hash_insert (i370_macro_hash, macro->name, (void *) macro); - if (retval != (const char *) NULL) - { - as_bad ("Internal assembler error for macro %s", macro->name); - dup_insn = TRUE; - } - } - } - - if (dup_insn) - abort (); -} - -/* Insert an operand value into an instruction. */ - -static i370_insn_t -i370_insert_operand (i370_insn_t insn, - const struct i370_operand *operand, - offsetT val) -{ - if (operand->insert) - { - const char *errmsg; - - /* Used for 48-bit insn's. */ - errmsg = NULL; - insn = (*operand->insert) (insn, (long) val, &errmsg); - if (errmsg) - as_bad ("%s", errmsg); - } - else - /* This is used only for 16, 32 bit insn's. */ - insn.i[0] |= (((long) val & ((1 << operand->bits) - 1)) - << operand->shift); - - return insn; -} - - -#ifdef OBJ_ELF -/* Parse @got, etc. and return the desired relocation. - Currently, i370 does not support (don't really need to support) any - of these fancier markups ... for example, no one is going to - write 'L 6,=V(bogus)@got' it just doesn't make sense (at least to me). - So basically, we could get away with this routine returning - BFD_RELOC_UNUSED in all circumstances. However, I'll leave - in for now in case someone ambitious finds a good use for this stuff ... - this routine was pretty much just copied from the powerpc code ... */ - -static bfd_reloc_code_real_type -i370_elf_suffix (char **str_p, expressionS *exp_p) -{ - struct map_bfd - { - char *string; - int length; - bfd_reloc_code_real_type reloc; - }; - - char ident[20]; - char *str = *str_p; - char *str2; - int ch; - int len; - struct map_bfd *ptr; - -#define MAP(str,reloc) { str, sizeof (str) - 1, reloc } - - static struct map_bfd mapping[] = - { - /* warnings with -mrelocatable. */ - MAP ("fixup", BFD_RELOC_CTOR), - { (char *)0, 0, BFD_RELOC_UNUSED } - }; - - if (*str++ != '@') - return BFD_RELOC_UNUSED; - - for (ch = *str, str2 = ident; - (str2 < ident + sizeof (ident) - 1 - && (ISALNUM (ch) || ch == '@')); - ch = *++str) - *str2++ = TOLOWER (ch); - - *str2 = '\0'; - len = str2 - ident; - - ch = ident[0]; - for (ptr = &mapping[0]; ptr->length > 0; ptr++) - if (ch == ptr->string[0] - && len == ptr->length - && memcmp (ident, ptr->string, ptr->length) == 0) - { - if (exp_p->X_add_number != 0 - && (ptr->reloc == BFD_RELOC_16_GOTOFF - || ptr->reloc == BFD_RELOC_LO16_GOTOFF - || ptr->reloc == BFD_RELOC_HI16_GOTOFF - || ptr->reloc == BFD_RELOC_HI16_S_GOTOFF)) - as_warn ("identifier+constant@got means identifier@got+constant"); - - /* Now check for identifier@suffix+constant */ - if (*str == '-' || *str == '+') - { - char *orig_line = input_line_pointer; - expressionS new_exp; - - input_line_pointer = str; - expression (&new_exp); - if (new_exp.X_op == O_constant) - { - exp_p->X_add_number += new_exp.X_add_number; - str = input_line_pointer; - } - - if (&input_line_pointer != str_p) - input_line_pointer = orig_line; - } - - *str_p = str; - return ptr->reloc; - } - - return BFD_RELOC_UNUSED; -} - -/* Like normal .long/.short/.word, except support @got, etc. - Clobbers input_line_pointer, checks end-of-line. */ - -static void -i370_elf_cons (int nbytes) /* 1=.byte, 2=.word, 4=.long. */ -{ - expressionS exp; - bfd_reloc_code_real_type reloc; - - if (is_it_end_of_statement ()) - { - demand_empty_rest_of_line (); - return; - } - - do - { - expression (&exp); - - if (exp.X_op == O_symbol - && *input_line_pointer == '@' - && (reloc = i370_elf_suffix (&input_line_pointer, &exp)) != BFD_RELOC_UNUSED) - { - reloc_howto_type *reloc_howto = bfd_reloc_type_lookup (stdoutput, reloc); - int size = bfd_get_reloc_size (reloc_howto); - - if (size > nbytes) - as_bad ("%s relocations do not fit in %d bytes\n", reloc_howto->name, nbytes); - else - { - char *p = frag_more ((int) nbytes); - int offset = nbytes - size; - - fix_new_exp (frag_now, p - frag_now->fr_literal + offset, size, &exp, 0, reloc); - } - } - else - emit_expr (&exp, (unsigned int) nbytes); - } - while (*input_line_pointer++ == ','); - - input_line_pointer--; /* Put terminator back into stream. */ - demand_empty_rest_of_line (); -} - - -/* ASCII to EBCDIC conversion table. */ -static unsigned char ascebc[256] = -{ - /*00 NL SH SX EX ET NQ AK BL */ - 0x00, 0x01, 0x02, 0x03, 0x37, 0x2D, 0x2E, 0x2F, - /*08 BS HT LF VT FF CR SO SI */ - 0x16, 0x05, 0x15, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F, - /*10 DL D1 D2 D3 D4 NK SN EB */ - 0x10, 0x11, 0x12, 0x13, 0x3C, 0x3D, 0x32, 0x26, - /*18 CN EM SB EC FS GS RS US */ - 0x18, 0x19, 0x3F, 0x27, 0x1C, 0x1D, 0x1E, 0x1F, - /*20 SP ! " # $ % & ' */ - 0x40, 0x5A, 0x7F, 0x7B, 0x5B, 0x6C, 0x50, 0x7D, - /*28 ( ) * + , - . / */ - 0x4D, 0x5D, 0x5C, 0x4E, 0x6B, 0x60, 0x4B, 0x61, - /*30 0 1 2 3 4 5 6 7 */ - 0xF0, 0xF1, 0xF2, 0xF3, 0xF4, 0xF5, 0xF6, 0xF7, - /*38 8 9 : ; < = > ? */ - 0xF8, 0xF9, 0x7A, 0x5E, 0x4C, 0x7E, 0x6E, 0x6F, - /*40 @ A B C D E F G */ - 0x7C, 0xC1, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7, - /*48 H I J K L M N O */ - 0xC8, 0xC9, 0xD1, 0xD2, 0xD3, 0xD4, 0xD5, 0xD6, - /*50 P Q R S T U V W */ - 0xD7, 0xD8, 0xD9, 0xE2, 0xE3, 0xE4, 0xE5, 0xE6, - /*58 X Y Z [ \ ] ^ _ */ - 0xE7, 0xE8, 0xE9, 0xAD, 0xE0, 0xBD, 0x5F, 0x6D, - /*60 ` a b c d e f g */ - 0x79, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, - /*68 h i j k l m n o */ - 0x88, 0x89, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, - /*70 p q r s t u v w */ - 0x97, 0x98, 0x99, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, - /*78 x y z { | } ~ DL */ - 0xA7, 0xA8, 0xA9, 0xC0, 0x4F, 0xD0, 0xA1, 0x07, - 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, - 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, - 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, - 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, - 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, - 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, - 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, - 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, - 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, - 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, - 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, - 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, - 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, - 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, - 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, - 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0xFF -}; - -/* EBCDIC to ASCII conversion table. */ -unsigned char ebcasc[256] = -{ - /*00 NU SH SX EX PF HT LC DL */ - 0x00, 0x01, 0x02, 0x03, 0x00, 0x09, 0x00, 0x7F, - /*08 SM VT FF CR SO SI */ - 0x00, 0x00, 0x00, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F, - /*10 DE D1 D2 TM RS NL BS IL */ - 0x10, 0x11, 0x12, 0x13, 0x14, 0x0A, 0x08, 0x00, - /*18 CN EM CC C1 FS GS RS US */ - 0x18, 0x19, 0x00, 0x00, 0x1C, 0x1D, 0x1E, 0x1F, - /*20 DS SS FS BP LF EB EC */ - 0x00, 0x00, 0x00, 0x00, 0x00, 0x0A, 0x17, 0x1B, - /*28 SM C2 EQ AK BL */ - 0x00, 0x00, 0x00, 0x00, 0x05, 0x06, 0x07, 0x00, - /*30 SY PN RS UC ET */ - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x04, - /*38 C3 D4 NK SU */ - 0x00, 0x00, 0x00, 0x00, 0x14, 0x15, 0x00, 0x1A, - /*40 SP */ - 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - /*48 . < ( + | */ - 0x00, 0x00, 0x00, 0x2E, 0x3C, 0x28, 0x2B, 0x7C, - /*50 & */ - 0x26, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - /*58 ! $ * ) ; ^ */ - 0x00, 0x00, 0x21, 0x24, 0x2A, 0x29, 0x3B, 0x5E, - /*60 - / */ - 0x2D, 0x2F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - /*68 , % _ > ? */ - 0x00, 0x00, 0x00, 0x2C, 0x25, 0x5F, 0x3E, 0x3F, - /*70 */ - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - /*78 ` : # @ ' = " */ - 0x00, 0x60, 0x3A, 0x23, 0x40, 0x27, 0x3D, 0x22, - /*80 a b c d e f g */ - 0x00, 0x61, 0x62, 0x63, 0x64, 0x65, 0x66, 0x67, - /*88 h i { */ - 0x68, 0x69, 0x00, 0x7B, 0x00, 0x00, 0x00, 0x00, - /*90 j k l m n o p */ - 0x00, 0x6A, 0x6B, 0x6C, 0x6D, 0x6E, 0x6F, 0x70, - /*98 q r } */ - 0x71, 0x72, 0x00, 0x7D, 0x00, 0x00, 0x00, 0x00, - /*A0 ~ s t u v w x */ - 0x00, 0x7E, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78, - /*A8 y z [ */ - 0x79, 0x7A, 0x00, 0x00, 0x00, 0x5B, 0x00, 0x00, - /*B0 */ - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - /*B8 ] */ - 0x00, 0x00, 0x00, 0x00, 0x00, 0x5D, 0x00, 0x00, - /*C0 { A B C D E F G */ - 0x7B, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46, 0x47, - /*C8 H I */ - 0x48, 0x49, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - /*D0 } J K L M N O P */ - 0x7D, 0x4A, 0x4B, 0x4C, 0x4D, 0x4E, 0x4F, 0x50, - /*D8 Q R */ - 0x51, 0x52, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - /*E0 \ S T U V W X */ - 0x5C, 0x00, 0x53, 0x54, 0x55, 0x56, 0x57, 0x58, - /*E8 Y Z */ - 0x59, 0x5A, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - /*F0 0 1 2 3 4 5 6 7 */ - 0x30, 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0x37, - /*F8 8 9 */ - 0x38, 0x39, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF -}; - -/* EBCDIC translation tables needed for 3270 support. */ - -static void -i370_ebcdic (int unused ATTRIBUTE_UNUSED) -{ - char *p, *end; - char delim = 0; - size_t nbytes; - - nbytes = strlen (input_line_pointer); - end = input_line_pointer + nbytes; - while ('\r' == *end) end --; - while ('\n' == *end) end --; - - delim = *input_line_pointer; - if (('\'' == delim) || ('\"' == delim)) - { - input_line_pointer ++; - end = rindex (input_line_pointer, delim); - } - - if (end > input_line_pointer) - { - nbytes = end - input_line_pointer +1; - p = frag_more (nbytes); - while (end > input_line_pointer) - { - *p = ascebc [(unsigned char) (*input_line_pointer)]; - ++p; ++input_line_pointer; - } - *p = '\0'; - } - if (delim == *input_line_pointer) ++input_line_pointer; -} - - -/* Stub out a couple of routines. */ - -static void -i370_rmode (int unused ATTRIBUTE_UNUSED) -{ - as_tsktsk ("rmode ignored"); -} - -static void -i370_dsect (int sect) -{ - char *save_line = input_line_pointer; - static char section[] = ".data\n"; - - /* Just pretend this is .section .data. */ - input_line_pointer = section; - obj_elf_section (sect); - - input_line_pointer = save_line; -} - -static void -i370_csect (int unused ATTRIBUTE_UNUSED) -{ - as_tsktsk ("csect not supported"); -} - - -/* DC Define Const is only partially supported. - For samplecode on what to do, look at i370_elf_cons() above. - This code handles pseudoops of the style - DC D'3.141592653' # in sysv4, .double 3.14159265 - DC F'1' # in sysv4, .long 1. */ - -static void -i370_dc (int unused ATTRIBUTE_UNUSED) -{ - char * p, tmp[50]; - int nbytes=0; - expressionS exp; - char type=0; - - if (is_it_end_of_statement ()) - { - demand_empty_rest_of_line (); - return; - } - - /* Figure out the size. */ - type = *input_line_pointer++; - switch (type) - { - case 'H': /* 16-bit */ - nbytes = 2; - break; - case 'E': /* 32-bit */ - case 'F': /* 32-bit */ - nbytes = 4; - break; - case 'D': /* 64-bit */ - nbytes = 8; - break; - default: - as_bad ("unsupported DC type"); - return; - } - - /* Get rid of pesky quotes. */ - if ('\'' == *input_line_pointer) - { - char * close; - - ++input_line_pointer; - close = strchr (input_line_pointer, '\''); - if (close) - *close= ' '; - else - as_bad ("missing end-quote"); - } - - if ('\"' == *input_line_pointer) - { - char * close; - - ++input_line_pointer; - close = strchr (input_line_pointer, '\"'); - if (close) - *close= ' '; - else - as_bad ("missing end-quote"); - } - - switch (type) - { - case 'H': /* 16-bit */ - case 'F': /* 32-bit */ - expression (&exp); - emit_expr (&exp, nbytes); - break; - case 'E': /* 32-bit */ - case 'D': /* 64-bit */ - md_atof (type, tmp, &nbytes); - p = frag_more (nbytes); - memcpy (p, tmp, nbytes); - break; - default: - as_bad ("unsupported DC type"); - return; - } - - demand_empty_rest_of_line (); -} - - -/* Provide minimal support for DS Define Storage. */ - -static void -i370_ds (int unused ATTRIBUTE_UNUSED) -{ - /* DS 0H or DS 0F or DS 0D. */ - if ('0' == *input_line_pointer) - { - int alignment = 0; /* Left shift 1 << align. */ - input_line_pointer ++; - switch (*input_line_pointer++) - { - case 'H': /* 16-bit */ - alignment = 1; - break; - case 'F': /* 32-bit */ - alignment = 2; - break; - case 'D': /* 64-bit */ - alignment = 3; - break; - default: - as_bad ("unsupported alignment"); - return; - } - frag_align (alignment, 0, 0); - record_alignment (now_seg, alignment); - } - else - as_bad ("this DS form not yet supported"); -} - -/* Solaris pseudo op to change to the .rodata section. */ - -static void -i370_elf_rdata (int sect) -{ - char *save_line = input_line_pointer; - static char section[] = ".rodata\n"; - - /* Just pretend this is .section .rodata. */ - input_line_pointer = section; - obj_elf_section (sect); - - input_line_pointer = save_line; -} - -/* Pseudo op to make file scope bss items. */ - -static void -i370_elf_lcomm (int unused ATTRIBUTE_UNUSED) -{ - char *name; - char c; - char *p; - offsetT size; - symbolS *symbolP; - offsetT align; - segT old_sec; - int old_subsec; - char *pfrag; - int align2; - - name = input_line_pointer; - c = get_symbol_end (); - - /* Just after name is now '\0'. */ - p = input_line_pointer; - *p = c; - SKIP_WHITESPACE (); - if (*input_line_pointer != ',') - { - as_bad ("Expected comma after symbol-name: rest of line ignored."); - ignore_rest_of_line (); - return; - } - - /* Skip ','. */ - input_line_pointer++; - if ((size = get_absolute_expression ()) < 0) - { - as_warn (".COMMon length (%ld.) <0! Ignored.", (long) size); - ignore_rest_of_line (); - return; - } - - /* The third argument to .lcomm is the alignment. */ - if (*input_line_pointer != ',') - align = 8; - else - { - ++input_line_pointer; - align = get_absolute_expression (); - if (align <= 0) - { - as_warn ("ignoring bad alignment"); - align = 8; - } - } - - *p = 0; - symbolP = symbol_find_or_make (name); - *p = c; - - if (S_IS_DEFINED (symbolP) && ! S_IS_COMMON (symbolP)) - { - as_bad ("Ignoring attempt to re-define symbol `%s'.", - S_GET_NAME (symbolP)); - ignore_rest_of_line (); - return; - } - - if (S_GET_VALUE (symbolP) && S_GET_VALUE (symbolP) != (valueT) size) - { - as_bad ("Length of .lcomm \"%s\" is already %ld. Not changed to %ld.", - S_GET_NAME (symbolP), - (long) S_GET_VALUE (symbolP), - (long) size); - - ignore_rest_of_line (); - return; - } - - /* Allocate_bss: */ - old_sec = now_seg; - old_subsec = now_subseg; - if (align) - { - /* Convert to a power of 2 alignment. */ - for (align2 = 0; (align & 1) == 0; align >>= 1, ++align2) - ; - if (align != 1) - { - as_bad ("Common alignment not a power of 2"); - ignore_rest_of_line (); - return; - } - } - else - align2 = 0; - - record_alignment (bss_section, align2); - subseg_set (bss_section, 0); - if (align2) - frag_align (align2, 0, 0); - if (S_GET_SEGMENT (symbolP) == bss_section) - symbol_get_frag (symbolP)->fr_symbol = 0; - symbol_set_frag (symbolP, frag_now); - pfrag = frag_var (rs_org, 1, 1, (relax_substateT) 0, symbolP, size, - (char *) 0); - *pfrag = 0; - S_SET_SIZE (symbolP, size); - S_SET_SEGMENT (symbolP, bss_section); - subseg_set (old_sec, old_subsec); - demand_empty_rest_of_line (); -} - -/* Validate any relocations emitted for -mrelocatable, possibly adding - fixups for word relocations in writable segments, so we can adjust - them at runtime. */ - -static void -i370_elf_validate_fix (fixS *fixp, segT seg) -{ - if (fixp->fx_done || fixp->fx_pcrel) - return; - - switch (shlib) - { - case SHLIB_NONE: - case SHLIB_PIC: - return; - - case SHILB_MRELOCATABLE: - if (fixp->fx_r_type <= BFD_RELOC_UNUSED - && fixp->fx_r_type != BFD_RELOC_16_GOTOFF - && fixp->fx_r_type != BFD_RELOC_HI16_GOTOFF - && fixp->fx_r_type != BFD_RELOC_LO16_GOTOFF - && fixp->fx_r_type != BFD_RELOC_HI16_S_GOTOFF - && fixp->fx_r_type != BFD_RELOC_32_BASEREL - && fixp->fx_r_type != BFD_RELOC_LO16_BASEREL - && fixp->fx_r_type != BFD_RELOC_HI16_BASEREL - && fixp->fx_r_type != BFD_RELOC_HI16_S_BASEREL - && strcmp (segment_name (seg), ".got2") != 0 - && strcmp (segment_name (seg), ".dtors") != 0 - && strcmp (segment_name (seg), ".ctors") != 0 - && strcmp (segment_name (seg), ".fixup") != 0 - && strcmp (segment_name (seg), ".stab") != 0 - && strcmp (segment_name (seg), ".gcc_except_table") != 0 - && strcmp (segment_name (seg), ".ex_shared") != 0) - { - if ((seg->flags & (SEC_READONLY | SEC_CODE)) != 0 - || fixp->fx_r_type != BFD_RELOC_CTOR) - as_bad_where (fixp->fx_file, fixp->fx_line, - "Relocation cannot be done when using -mrelocatable"); - } - return; - default: - break; - } -} -#endif /* OBJ_ELF */ - - -#define LITERAL_POOL_SUPPORT -#ifdef LITERAL_POOL_SUPPORT -/* Provide support for literal pools within the text section. - Loosely based on similar code from tc-arm.c. - We will use four symbols to locate four parts of the literal pool. - These four sections contain 64,32,16 and 8-bit constants; we use - four sections so that all memory access can be appropriately aligned. - That is, we want to avoid mixing these together so that we don't - waste space padding out to alignments. The four pointers - longlong_poolP, word_poolP, etc. point to a symbol labeling the - start of each pool part. - - lit_pool_num increments from zero to infinity and uniquely id's - -- its used to generate the *_poolP symbol name. */ - -#define MAX_LITERAL_POOL_SIZE 1024 - -typedef struct literalS -{ - struct expressionS exp; - char * sym_name; - char size; /* 1,2,4 or 8 */ - short offset; -} literalT; - -literalT literals[MAX_LITERAL_POOL_SIZE]; -int next_literal_pool_place = 0; /* Next free entry in the pool. */ - -static symbolS *longlong_poolP = NULL; /* 64-bit pool entries. */ -static symbolS *word_poolP = NULL; /* 32-bit pool entries. */ -static symbolS *short_poolP = NULL; /* 16-bit pool entries. */ -static symbolS *byte_poolP = NULL; /* 8-bit pool entries. */ - -static int lit_pool_num = 1; - -/* Create a new, empty symbol. */ -static symbolS * -symbol_make_empty (void) -{ - return symbol_create (FAKE_LABEL_NAME, undefined_section, - (valueT) 0, &zero_address_frag); -} - -/* Make the first argument an address-relative expression - by subtracting the second argument. */ - -static void -i370_make_relative (expressionS *exx, expressionS *baseaddr) -{ - if (O_constant == baseaddr->X_op) - { - exx->X_op = O_symbol; - exx->X_add_number -= baseaddr->X_add_number; - } - else if (O_symbol == baseaddr->X_op) - { - exx->X_op = O_subtract; - exx->X_op_symbol = baseaddr->X_add_symbol; - exx->X_add_number -= baseaddr->X_add_number; - } - else if (O_uminus == baseaddr->X_op) - { - exx->X_op = O_add; - exx->X_op_symbol = baseaddr->X_add_symbol; - exx->X_add_number += baseaddr->X_add_number; - } - else - as_bad ("Missing or bad .using directive"); -} -/* Add an expression to the literal pool. */ - -static void -add_to_lit_pool (expressionS *exx, char *name, int sz) -{ - int lit_count = 0; - int offset_in_pool = 0; - - /* Start a new pool, if necessary. */ - if (8 == sz && NULL == longlong_poolP) - longlong_poolP = symbol_make_empty (); - else if (4 == sz && NULL == word_poolP) - word_poolP = symbol_make_empty (); - else if (2 == sz && NULL == short_poolP) - short_poolP = symbol_make_empty (); - else if (1 == sz && NULL == byte_poolP) - byte_poolP = symbol_make_empty (); - - /* Check if this literal value is already in the pool. - FIXME: We should probably be checking expressions - of type O_symbol as well. - FIXME: This is probably(certainly?) broken for O_big, - which includes 64-bit long-longs. */ - while (lit_count < next_literal_pool_place) - { - if (exx->X_op == O_constant - && literals[lit_count].exp.X_op == exx->X_op - && literals[lit_count].exp.X_add_number == exx->X_add_number - && literals[lit_count].exp.X_unsigned == exx->X_unsigned - && literals[lit_count].size == sz) - break; - else if (literals[lit_count].sym_name - && name - && !strcmp (name, literals[lit_count].sym_name)) - break; - if (sz == literals[lit_count].size) - offset_in_pool += sz; - lit_count ++; - } - - if (lit_count == next_literal_pool_place) /* new entry */ - { - if (next_literal_pool_place > MAX_LITERAL_POOL_SIZE) - as_bad ("Literal Pool Overflow"); - - literals[next_literal_pool_place].exp = *exx; - literals[next_literal_pool_place].size = sz; - literals[next_literal_pool_place].offset = offset_in_pool; - if (name) - literals[next_literal_pool_place].sym_name = strdup (name); - else - literals[next_literal_pool_place].sym_name = NULL; - next_literal_pool_place++; - } - - /* ???_poolP points to the beginning of the literal pool. - X_add_number is the offset from the beginning of the - literal pool to this expr minus the location of the most - recent .using directive. Thus, the grand total value of the - expression is the distance from .using to the literal. */ - if (8 == sz) - exx->X_add_symbol = longlong_poolP; - else if (4 == sz) - exx->X_add_symbol = word_poolP; - else if (2 == sz) - exx->X_add_symbol = short_poolP; - else if (1 == sz) - exx->X_add_symbol = byte_poolP; - exx->X_add_number = offset_in_pool; - exx->X_op_symbol = NULL; - - /* If the user has set up a base reg in another section, - use that; otherwise use the text section. */ - if (0 < i370_using_other_regno) - i370_make_relative (exx, &i370_using_other_baseaddr); - else - i370_make_relative (exx, &i370_using_text_baseaddr); -} - -/* The symbol setup for the literal pool is done in two steps. First, - a symbol that represents the start of the literal pool is created, - above, in the add_to_pool() routine. This sym ???_poolP. - However, we don't know what fragment its in until a bit later. - So we defer the frag_now thing, and the symbol name, until .ltorg time. */ - -/* Can't use symbol_new here, so have to create a symbol and then at - a later date assign it a value. Thats what these functions do. */ - -static void -symbol_locate (symbolS *symbolP, - const char *name, /* It is copied, the caller can modify. */ - segT segment, /* Segment identifier (SEG_<something>). */ - valueT valu, /* Symbol value. */ - fragS *frag) /* Associated fragment. */ -{ - size_t name_length; - char *preserved_copy_of_name; - - name_length = strlen (name) + 1; /* +1 for \0 */ - obstack_grow (¬es, name, name_length); - preserved_copy_of_name = obstack_finish (¬es); - - S_SET_NAME (symbolP, preserved_copy_of_name); - - S_SET_SEGMENT (symbolP, segment); - S_SET_VALUE (symbolP, valu); - symbol_clear_list_pointers (symbolP); - - symbol_set_frag (symbolP, frag); - - /* Link to end of symbol chain. */ - { - extern int symbol_table_frozen; - - if (symbol_table_frozen) - abort (); - } - - symbol_append (symbolP, symbol_lastP, &symbol_rootP, &symbol_lastP); - - obj_symbol_new_hook (symbolP); - -#ifdef tc_symbol_new_hook - tc_symbol_new_hook (symbolP); -#endif - -#define DEBUG_SYMS -#ifdef DEBUG_SYMS - verify_symbol_chain(symbol_rootP, symbol_lastP); -#endif /* DEBUG_SYMS */ -} - -/* i370_addr_offset() will convert operand expressions - that appear to be absolute into thier base-register - relative form. These expressions come in two types: - - (1) of the form "* + const" * where "*" means - relative offset since the last using - i.e. "*" means ".-using_baseaddr" - - (2) labels, which are never absolute, but are always - relative to the last "using". Anything with an alpha - character is considered to be a label (since symbols - can never be operands), and since we've already handled - register operands. For example, "BL .L33" branch low - to .L33 RX form insn frequently terminates for-loops. */ - -static bfd_boolean -i370_addr_offset (expressionS *exx) -{ - char *dot, *lab; - int islabel = 0; - int all_digits = 0; - - /* Search for a label; anything with an alpha char will do. - Local labels consist of N digits followed by either b or f. */ - lab = input_line_pointer; - while (*lab && (',' != *lab) && ('(' != *lab)) - { - if (ISDIGIT (*lab)) - all_digits = 1; - else if (ISALPHA (*lab)) - { - if (!all_digits) - { - islabel = 1; - break; - } - else if (('f' == *lab) || ('b' == *lab)) - { - islabel = 1; - break; - } - if (all_digits) - break; - } - else if ('.' != *lab) - break; - ++lab; - } - - /* See if operand has a * in it. */ - dot = strchr (input_line_pointer, '*'); - - if (!dot && !islabel) - return FALSE; - - /* Replace * with . and let expr munch on it. */ - if (dot) - *dot = '.'; - expression (exx); - - /* OK, now we have to subtract the "using" location. - Normally branches appear in the text section only. */ - if (0 == strncmp (now_seg->name, ".text", 5) || 0 > i370_using_other_regno) - i370_make_relative (exx, &i370_using_text_baseaddr); - else - i370_make_relative (exx, &i370_using_other_baseaddr); - - /* Put the * back. */ - if (dot) - *dot = '*'; - - return TRUE; -} - -/* Handle address constants of various sorts. */ -/* The currently supported types are - =A(some_symb) - =V(some_extern) - =X'deadbeef' hexadecimal - =F'1234' 32-bit const int - =H'1234' 16-bit const int. */ - -static bfd_boolean -i370_addr_cons (expressionS *exp) -{ - char *name; - char *sym_name, delim; - int name_len; - int hex_len = 0; - int cons_len = 0; - - name = input_line_pointer; - sym_name = input_line_pointer; - /* Find the spelling of the operand. */ - if (name[0] == '=' && ISALPHA (name[1])) - name = ++input_line_pointer; - else - return FALSE; - - switch (name[0]) - { - case 'A': /* A == address-of. */ - case 'V': /* V == extern. */ - ++input_line_pointer; - expression (exp); - - /* We use a simple string name to collapse together - multiple refrences to the same address literal. */ - name_len = strcspn (sym_name, ", "); - delim = *(sym_name + name_len); - *(sym_name + name_len) = 0x0; - add_to_lit_pool (exp, sym_name, 4); - *(sym_name + name_len) = delim; - - break; - case 'H': - case 'F': - case 'X': - case 'E': /* Single-precision float point. */ - case 'D': /* Double-precision float point. */ - - /* H == 16-bit fixed-point const; expression must be const. */ - /* F == fixed-point const; expression must be const. */ - /* X == fixed-point const; expression must be const. */ - if ('H' == name[0]) cons_len = 2; - else if ('F' == name[0]) cons_len = 4; - else if ('X' == name[0]) cons_len = -1; - else if ('E' == name[0]) cons_len = 4; - else if ('D' == name[0]) cons_len = 8; - - /* Extract length, if it is present; - FIXME: assume single-digit length. */ - if ('L' == name[1]) - { - /* Should work for ASCII and EBCDIC. */ - cons_len = name[2] - '0'; - input_line_pointer += 2; - } - - ++input_line_pointer; - - /* Get rid of pesky quotes. */ - if ('\'' == *input_line_pointer) - { - char * close; - ++input_line_pointer; - close = strchr (input_line_pointer, '\''); - if (close) - *close= ' '; - else - as_bad ("missing end-quote"); - } - if ('\"' == *input_line_pointer) - { - char * close; - ++input_line_pointer; - close = strchr (input_line_pointer, '\"'); - if (close) - *close= ' '; - else - as_bad ("missing end-quote"); - } - if (('X' == name[0]) || ('E' == name[0]) || ('D' == name[0])) - { - char tmp[50]; - char *save; - - /* The length of hex constants is specified directly with L, - or implied through the number of hex digits. For example: - =X'AB' one byte - =X'abcd' two bytes - =X'000000AB' four bytes - =XL4'AB' four bytes, left-padded withn zero. */ - if (('X' == name[0]) && (0 > cons_len)) - { - save = input_line_pointer; - while (*save) - { - if (ISXDIGIT (*save)) - hex_len++; - save++; - } - cons_len = (hex_len+1) /2; - } - /* I believe this works even for =XL8'dada0000beeebaaa' - which should parse out to X_op == O_big - Note that floats and doubles get represented as - 0d3.14159265358979 or 0f 2.7. */ - tmp[0] = '0'; - tmp[1] = name[0]; - tmp[2] = 0; - strcat (tmp, input_line_pointer); - save = input_line_pointer; - input_line_pointer = tmp; - expression (exp); - input_line_pointer = save + (input_line_pointer-tmp-2); - - /* Fix up lengths for floats and doubles. */ - if (O_big == exp->X_op) - exp->X_add_number = cons_len / CHARS_PER_LITTLENUM; - } - else - expression (exp); - - /* O_big occurs when more than 4 bytes worth gets parsed. */ - if ((exp->X_op != O_constant) && (exp->X_op != O_big)) - { - as_bad ("expression not a constant"); - return FALSE; - } - add_to_lit_pool (exp, 0x0, cons_len); - break; - - default: - as_bad ("Unknown/unsupported address literal type"); - return FALSE; - } - - return TRUE; -} - - -/* Dump the contents of the literal pool that we've accumulated so far. - This aligns the pool to the size of the largest literal in the pool. */ - -static void -i370_ltorg (int ignore ATTRIBUTE_UNUSED) -{ - int litsize; - int lit_count = 0; - int biggest_literal_size = 0; - int biggest_align = 0; - char pool_name[20]; - - if (strncmp (now_seg->name, ".text", 5)) - { - if (i370_other_section == undefined_section) - as_bad (".ltorg without prior .using in section %s", - now_seg->name); - - if (i370_other_section != now_seg) - as_bad (".ltorg in section %s paired to .using in section %s", - now_seg->name, i370_other_section->name); - } - - if (! longlong_poolP - && ! word_poolP - && ! short_poolP - && ! byte_poolP) - /* Nothing to do. */ - return; - - /* Find largest literal .. 2 4 or 8. */ - lit_count = 0; - while (lit_count < next_literal_pool_place) - { - if (biggest_literal_size < literals[lit_count].size) - biggest_literal_size = literals[lit_count].size; - lit_count ++; - } - if (1 == biggest_literal_size) biggest_align = 0; - else if (2 == biggest_literal_size) biggest_align = 1; - else if (4 == biggest_literal_size) biggest_align = 2; - else if (8 == biggest_literal_size) biggest_align = 3; - else as_bad ("bad alignment of %d bytes in literal pool", biggest_literal_size); - if (0 == biggest_align) biggest_align = 1; - - /* Align pool for short, word, double word accesses. */ - frag_align (biggest_align, 0, 0); - record_alignment (now_seg, biggest_align); - - /* Note that the gas listing will print only the first five - entries in the pool .... wonder how to make it print more. */ - /* Output largest literals first, then the smaller ones. */ - for (litsize=8; litsize; litsize /=2) - { - symbolS *current_poolP = NULL; - switch (litsize) - { - case 8: - current_poolP = longlong_poolP; break; - case 4: - current_poolP = word_poolP; break; - case 2: - current_poolP = short_poolP; break; - case 1: - current_poolP = byte_poolP; break; - default: - as_bad ("bad literal size\n"); - } - if (NULL == current_poolP) - continue; - sprintf (pool_name, ".LITP%01d%06d", litsize, lit_pool_num); - symbol_locate (current_poolP, pool_name, now_seg, - (valueT) frag_now_fix (), frag_now); - symbol_table_insert (current_poolP); - - lit_count = 0; - while (lit_count < next_literal_pool_place) - { - if (litsize == literals[lit_count].size) - { -#define EMIT_ADDR_CONS_SYMBOLS -#ifdef EMIT_ADDR_CONS_SYMBOLS - /* Create a bogus symbol, add it to the pool ... - For the most part, I think this is a useless exercise, - except that having these symbol names in the objects - is vaguely useful for debugging. */ - if (literals[lit_count].sym_name) - { - symbolS * symP = symbol_make_empty (); - symbol_locate (symP, literals[lit_count].sym_name, now_seg, - (valueT) frag_now_fix (), frag_now); - symbol_table_insert (symP); - } -#endif /* EMIT_ADDR_CONS_SYMBOLS */ - - emit_expr (&(literals[lit_count].exp), literals[lit_count].size); - } - lit_count ++; - } - } - - next_literal_pool_place = 0; - longlong_poolP = NULL; - word_poolP = NULL; - short_poolP = NULL; - byte_poolP = NULL; - lit_pool_num++; -} - -#endif /* LITERAL_POOL_SUPPORT */ - - -/* Add support for the HLASM-like USING directive to indicate - the base register to use ... we don't support the full - hlasm semantics for this ... we merely pluck a base address - and a register number out. We print a warning if using is - called multiple times. I suppose we should check to see - if the regno is valid. */ - -static void -i370_using (int ignore ATTRIBUTE_UNUSED) -{ - expressionS ex, baseaddr; - int iregno; - char *star; - - /* If "*" appears in a using, it means "." - replace it with "." so that expr doesn't get confused. */ - star = strchr (input_line_pointer, '*'); - if (star) - *star = '.'; - - /* The first arg to using will usually be ".", but it can - be a more complex expression too. */ - expression (&baseaddr); - if (star) - *star = '*'; - if (O_constant != baseaddr.X_op - && O_symbol != baseaddr.X_op - && O_uminus != baseaddr.X_op) - as_bad (".using: base address expression illegal or too complex"); - - if (*input_line_pointer != '\0') ++input_line_pointer; - - /* The second arg to using had better be a register. */ - register_name (&ex); - demand_empty_rest_of_line (); - iregno = ex.X_add_number; - - if (0 == strncmp (now_seg->name, ".text", 5)) - { - i370_using_text_baseaddr = baseaddr; - i370_using_text_regno = iregno; - } - else - { - i370_using_other_baseaddr = baseaddr; - i370_using_other_regno = iregno; - i370_other_section = now_seg; - } -} - -static void -i370_drop (int ignore ATTRIBUTE_UNUSED) -{ - expressionS ex; - int iregno; - - register_name (&ex); - demand_empty_rest_of_line (); - iregno = ex.X_add_number; - - if (0 == strncmp (now_seg->name, ".text", 5)) - { - if (iregno != i370_using_text_regno) - as_bad ("droping register %d in section %s does not match using register %d", - iregno, now_seg->name, i370_using_text_regno); - - i370_using_text_regno = -1; - i370_using_text_baseaddr.X_op = O_absent; - } - else - { - if (iregno != i370_using_other_regno) - as_bad ("droping register %d in section %s does not match using register %d", - iregno, now_seg->name, i370_using_other_regno); - - if (i370_other_section != now_seg) - as_bad ("droping register %d in section %s previously used in section %s", - iregno, now_seg->name, i370_other_section->name); - - i370_using_other_regno = -1; - i370_using_other_baseaddr.X_op = O_absent; - i370_other_section = undefined_section; - } -} - - -/* We need to keep a list of fixups. We can't simply generate them as - we go, because that would require us to first create the frag, and - that would screw up references to ``.''. */ - -struct i370_fixup -{ - expressionS exp; - int opindex; - bfd_reloc_code_real_type reloc; -}; - -#define MAX_INSN_FIXUPS 5 - -/* Handle a macro. Gather all the operands, transform them as - described by the macro, and call md_assemble recursively. All the - operands are separated by commas; we don't accept parentheses - around operands here. */ - -static void -i370_macro (char *str, const struct i370_macro *macro) -{ - char *operands[10]; - unsigned int count; - char *s; - unsigned int len; - const char *format; - int arg; - char *send; - char *complete; - - /* Gather the users operands into the operands array. */ - count = 0; - s = str; - while (1) - { - if (count >= sizeof operands / sizeof operands[0]) - break; - operands[count++] = s; - s = strchr (s, ','); - if (s == (char *) NULL) - break; - *s++ = '\0'; - } - - if (count != macro->operands) - { - as_bad ("wrong number of operands"); - return; - } - - /* Work out how large the string must be (the size is unbounded - because it includes user input). */ - len = 0; - format = macro->format; - while (*format != '\0') - { - if (*format != '%') - { - ++len; - ++format; - } - else - { - arg = strtol (format + 1, &send, 10); - know (send != format && arg >= 0 && (unsigned) arg < count); - len += strlen (operands[arg]); - format = send; - } - } - - /* Put the string together. */ - complete = s = alloca (len + 1); - format = macro->format; - while (*format != '\0') - { - if (*format != '%') - *s++ = *format++; - else - { - arg = strtol (format + 1, &send, 10); - strcpy (s, operands[arg]); - s += strlen (s); - format = send; - } - } - *s = '\0'; - - /* Assemble the constructed instruction. */ - md_assemble (complete); -} - -/* This routine is called for each instruction to be assembled. */ - -void -md_assemble (char *str) -{ - char *s, *opcode_str; - const struct i370_opcode *opcode; - i370_insn_t insn; - const unsigned char *opindex_ptr; - int have_optional_index, have_optional_basereg, have_optional_reg; - int skip_optional_index, skip_optional_basereg, skip_optional_reg; - int use_text=0, use_other=0; - int off_by_one; - struct i370_fixup fixups[MAX_INSN_FIXUPS]; - int fc; - char *f; - int i; -#ifdef OBJ_ELF - bfd_reloc_code_real_type reloc; -#endif - - /* Get the opcode. */ - for (s = str; *s != '\0' && ! ISSPACE (*s); s++) - ; - if (*s != '\0') - *s++ = '\0'; - opcode_str = str; - - /* Look up the opcode in the hash table. */ - opcode = (const struct i370_opcode *) hash_find (i370_hash, str); - if (opcode == (const struct i370_opcode *) NULL) - { - const struct i370_macro *macro; - - assert (i370_macro_hash); - macro = (const struct i370_macro *) hash_find (i370_macro_hash, str); - if (macro == (const struct i370_macro *) NULL) - as_bad ("Unrecognized opcode: `%s'", str); - else - i370_macro (s, macro); - - return; - } - - insn = opcode->opcode; - - str = s; - while (ISSPACE (*str)) - ++str; - - /* I370 operands are either expressions or address constants. - Many operand types are optional. The optional operands - are always surrounded by parens, and are used to denote the base - register ... e.g. "A R1, D2" or "A R1, D2(,B2) as opposed to - the fully-formed "A R1, D2(X2,B2)". Note also the = sign, - such as A R1,=A(i) where the address-of operator =A implies - use of both a base register, and a missing index register. - - So, before we start seriously parsing the operands, we check - to see if we have an optional operand, and, if we do, we count - the number of commas to see which operand should be omitted. */ - - have_optional_index = have_optional_basereg = have_optional_reg = 0; - for (opindex_ptr = opcode->operands; *opindex_ptr != 0; opindex_ptr++) - { - const struct i370_operand *operand; - - operand = &i370_operands[*opindex_ptr]; - if ((operand->flags & I370_OPERAND_INDEX) != 0) - have_optional_index = 1; - if ((operand->flags & I370_OPERAND_BASE) != 0) - have_optional_basereg = 1; - if ((operand->flags & I370_OPERAND_OPTIONAL) != 0) - have_optional_reg = 1; - } - - skip_optional_index = skip_optional_basereg = skip_optional_reg = 0; - if (have_optional_index || have_optional_basereg) - { - unsigned int opcount, nwanted; - - /* There is an optional operand. Count the number of - commas and open-parens in the input line. */ - if (*str == '\0') - opcount = 0; - else - { - opcount = 1; - s = str; - while ((s = strpbrk (s, ",(=")) != (char *) NULL) - { - ++opcount; - ++s; - if (',' == *s) ++s; /* avoid counting things like (, */ - if ('=' == *s) { ++s; --opcount; } - } - } - - /* If there are fewer operands in the line then are called - for by the instruction, we want to skip the optional - operand. */ - nwanted = strlen ((char *) opcode->operands); - if (have_optional_index) - { - if (opcount < nwanted) - skip_optional_index = 1; - if (have_optional_basereg && ((opcount+1) < nwanted)) - skip_optional_basereg = 1; - if (have_optional_reg && ((opcount+1) < nwanted)) - skip_optional_reg = 1; - } - else - { - if (have_optional_basereg && (opcount < nwanted)) - skip_optional_basereg = 1; - if (have_optional_reg && (opcount < nwanted)) - skip_optional_reg = 1; - } - } - - /* Perform some off-by-one hacks on the length field of certain instructions. - Its such a shame to have to do this, but the problem is that HLASM got - defined so that the lengths differ by one from the actual machine instructions. - this code should probably be moved to a special inster-operand routine. - Sigh. Affected instructions are Compare Logical, Move and Exclusive OR - hack alert -- aren't *all* SS instructions affected ?? */ - off_by_one = 0; - if (0 == strcasecmp ("CLC", opcode->name) - || 0 == strcasecmp ("ED", opcode->name) - || 0 == strcasecmp ("EDMK", opcode->name) - || 0 == strcasecmp ("MVC", opcode->name) - || 0 == strcasecmp ("MVCIN", opcode->name) - || 0 == strcasecmp ("MVN", opcode->name) - || 0 == strcasecmp ("MVZ", opcode->name) - || 0 == strcasecmp ("NC", opcode->name) - || 0 == strcasecmp ("OC", opcode->name) - || 0 == strcasecmp ("XC", opcode->name)) - off_by_one = 1; - - /* Gather the operands. */ - fc = 0; - for (opindex_ptr = opcode->operands; *opindex_ptr != 0; opindex_ptr++) - { - const struct i370_operand *operand; - const char *errmsg; - char *hold; - expressionS ex; - - operand = &i370_operands[*opindex_ptr]; - errmsg = NULL; - - /* If this is an index operand, and we are skipping it, - just insert a zero. */ - if (skip_optional_index && - ((operand->flags & I370_OPERAND_INDEX) != 0)) - { - insn = i370_insert_operand (insn, operand, 0); - continue; - } - - /* If this is the base operand, and we are skipping it, - just insert the current using basreg. */ - if (skip_optional_basereg && - ((operand->flags & I370_OPERAND_BASE) != 0)) - { - int basereg = -1; - if (use_text) - { - if (0 == strncmp (now_seg->name, ".text", 5) - || 0 > i370_using_other_regno) - basereg = i370_using_text_regno; - else - basereg = i370_using_other_regno; - } - else if (use_other) - { - if (0 > i370_using_other_regno) - basereg = i370_using_text_regno; - else - basereg = i370_using_other_regno; - } - if (0 > basereg) - as_bad ("not using any base register"); - - insn = i370_insert_operand (insn, operand, basereg); - continue; - } - - /* If this is an optional operand, and we are skipping it, - Use zero (since a non-zero value would denote a register) */ - if (skip_optional_reg - && ((operand->flags & I370_OPERAND_OPTIONAL) != 0)) - { - insn = i370_insert_operand (insn, operand, 0); - continue; - } - - /* Gather the operand. */ - hold = input_line_pointer; - input_line_pointer = str; - - /* Register names are only allowed where there are registers. */ - if ((operand->flags & I370_OPERAND_GPR) != 0) - { - /* Quickie hack to get past things like (,r13). */ - if (skip_optional_index && (',' == *input_line_pointer)) - { - *input_line_pointer = ' '; - input_line_pointer ++; - } - - if (! register_name (&ex)) - as_bad ("expecting a register for operand %d", - (int) (opindex_ptr - opcode->operands + 1)); - } - - /* Check for an address constant expression. */ - /* We will put PSW-relative addresses in the text section, - and address literals in the .data (or other) section. */ - else if (i370_addr_cons (&ex)) - use_other = 1; - else if (i370_addr_offset (&ex)) - use_text = 1; - else expression (&ex); - - str = input_line_pointer; - input_line_pointer = hold; - - /* Perform some off-by-one hacks on the length field of certain instructions. - Its such a shame to have to do this, but the problem is that HLASM got - defined so that the programmer specifies a length that is one greater - than what the machine instruction wants. Sigh. */ - if (off_by_one && (0 == strcasecmp ("SS L", operand->name))) - ex.X_add_number --; - - if (ex.X_op == O_illegal) - as_bad ("illegal operand"); - else if (ex.X_op == O_absent) - as_bad ("missing operand"); - else if (ex.X_op == O_register) - insn = i370_insert_operand (insn, operand, ex.X_add_number); - else if (ex.X_op == O_constant) - { -#ifdef OBJ_ELF - /* Allow @HA, @L, @H on constants. - Well actually, no we don't; there really don't make sense - (at least not to me) for the i370. However, this code is - left here for any dubious future expansion reasons. */ - char *orig_str = str; - - if ((reloc = i370_elf_suffix (&str, &ex)) != BFD_RELOC_UNUSED) - switch (reloc) - { - default: - str = orig_str; - break; - - case BFD_RELOC_LO16: - /* X_unsigned is the default, so if the user has done - something which cleared it, we always produce a - signed value. */ - ex.X_add_number = (((ex.X_add_number & 0xffff) - ^ 0x8000) - - 0x8000); - break; - - case BFD_RELOC_HI16: - ex.X_add_number = (ex.X_add_number >> 16) & 0xffff; - break; - - case BFD_RELOC_HI16_S: - ex.X_add_number = (((ex.X_add_number >> 16) & 0xffff) - + ((ex.X_add_number >> 15) & 1)); - break; - } -#endif - insn = i370_insert_operand (insn, operand, ex.X_add_number); - } -#ifdef OBJ_ELF - else if ((reloc = i370_elf_suffix (&str, &ex)) != BFD_RELOC_UNUSED) - { - as_tsktsk ("md_assemble(): suffixed relocations not supported\n"); - - /* We need to generate a fixup for this expression. */ - if (fc >= MAX_INSN_FIXUPS) - as_fatal ("too many fixups"); - fixups[fc].exp = ex; - fixups[fc].opindex = 0; - fixups[fc].reloc = reloc; - ++fc; - } -#endif /* OBJ_ELF */ - else - { - /* We need to generate a fixup for this expression. */ - /* Typically, the expression will just be a symbol ... - printf ("insn %s needs fixup for %s \n", - opcode->name, ex.X_add_symbol->bsym->name); */ - - if (fc >= MAX_INSN_FIXUPS) - as_fatal ("too many fixups"); - fixups[fc].exp = ex; - fixups[fc].opindex = *opindex_ptr; - fixups[fc].reloc = BFD_RELOC_UNUSED; - ++fc; - } - - /* Skip over delimiter (close paren, or comma). */ - if ((')' == *str) && (',' == *(str+1))) - ++str; - if (*str != '\0') - ++str; - } - - while (ISSPACE (*str)) - ++str; - - if (*str != '\0') - as_bad ("junk at end of line: `%s'", str); - - /* Write out the instruction. */ - f = frag_more (opcode->len); - if (4 >= opcode->len) - md_number_to_chars (f, insn.i[0], opcode->len); - else - { - md_number_to_chars (f, insn.i[0], 4); - - if (6 == opcode->len) - md_number_to_chars ((f + 4), ((insn.i[1])>>16), 2); - else - { - /* Not used --- don't have any 8 byte instructions. */ - as_bad ("Internal Error: bad instruction length"); - md_number_to_chars ((f + 4), insn.i[1], opcode->len -4); - } - } - - /* Create any fixups. At this point we do not use a - bfd_reloc_code_real_type, but instead just use the - BFD_RELOC_UNUSED plus the operand index. This lets us easily - handle fixups for any operand type, although that is admittedly - not a very exciting feature. We pick a BFD reloc type in - md_apply_fix. */ - for (i = 0; i < fc; i++) - { - const struct i370_operand *operand; - - operand = &i370_operands[fixups[i].opindex]; - if (fixups[i].reloc != BFD_RELOC_UNUSED) - { - reloc_howto_type *reloc_howto = bfd_reloc_type_lookup (stdoutput, fixups[i].reloc); - int size; - fixS *fixP; - - if (!reloc_howto) - abort (); - - size = bfd_get_reloc_size (reloc_howto); - - if (size < 1 || size > 4) - abort (); - - printf (" gwana doo fixup %d \n", i); - fixP = fix_new_exp (frag_now, f - frag_now->fr_literal, size, - &fixups[i].exp, reloc_howto->pc_relative, - fixups[i].reloc); - - /* Turn off complaints that the addend is too large for things like - foo+100000@ha. */ - switch (fixups[i].reloc) - { - case BFD_RELOC_16_GOTOFF: - case BFD_RELOC_LO16: - case BFD_RELOC_HI16: - case BFD_RELOC_HI16_S: - fixP->fx_no_overflow = 1; - break; - default: - break; - } - } - else - { - fix_new_exp (frag_now, f - frag_now->fr_literal, opcode->len, - &fixups[i].exp, - (operand->flags & I370_OPERAND_RELATIVE) != 0, - ((bfd_reloc_code_real_type) - (fixups[i].opindex + (int) BFD_RELOC_UNUSED))); - } - } -} - - -/* Pseudo-op handling. */ - -/* The .byte pseudo-op. This is similar to the normal .byte - pseudo-op, but it can also take a single ASCII string. */ - -static void -i370_byte (int ignore ATTRIBUTE_UNUSED) -{ - if (*input_line_pointer != '\"') - { - cons (1); - return; - } - - /* Gather characters. A real double quote is doubled. Unusual - characters are not permitted. */ - ++input_line_pointer; - while (1) - { - char c; - - c = *input_line_pointer++; - - if (c == '\"') - { - if (*input_line_pointer != '\"') - break; - ++input_line_pointer; - } - - FRAG_APPEND_1_CHAR (c); - } - - demand_empty_rest_of_line (); -} - -/* The .tc pseudo-op. This is used when generating XCOFF and ELF. - This takes two or more arguments. - - When generating XCOFF output, the first argument is the name to - give to this location in the toc; this will be a symbol with class - TC. The rest of the arguments are 4 byte values to actually put at - this location in the TOC; often there is just one more argument, a - relocatable symbol reference. - - When not generating XCOFF output, the arguments are the same, but - the first argument is simply ignored. */ - -static void -i370_tc (int ignore ATTRIBUTE_UNUSED) -{ - - /* Skip the TOC symbol name. */ - while (is_part_of_name (*input_line_pointer) - || *input_line_pointer == '[' - || *input_line_pointer == ']' - || *input_line_pointer == '{' - || *input_line_pointer == '}') - ++input_line_pointer; - - /* Align to a four byte boundary. */ - frag_align (2, 0, 0); - record_alignment (now_seg, 2); - - if (*input_line_pointer != ',') - demand_empty_rest_of_line (); - else - { - ++input_line_pointer; - cons (4); - } -} - -/* Turn a string in input_line_pointer into a floating point constant - of type TYPE, and store the appropriate bytes in *LITP. The number - of LITTLENUMS emitted is stored in *SIZEP. An error message is - returned, or NULL on OK. */ - -char * -md_atof (int type, char *litp, int *sizep) -{ - int prec; - LITTLENUM_TYPE words[4]; - char *t; - int i; - - switch (type) - { - case 'f': - case 'E': - type = 'f'; - prec = 2; - break; - - case 'd': - case 'D': - type = 'd'; - prec = 4; - break; - - default: - *sizep = 0; - return "bad call to md_atof"; - } - - /* 360/370/390 have two float formats: an old, funky 360 single-precision - * format, and the ieee format. Support only the ieee format. */ - t = atof_ieee (input_line_pointer, type, words); - if (t) - input_line_pointer = t; - - *sizep = prec * 2; - - for (i = 0; i < prec; i++) - { - md_number_to_chars (litp, (valueT) words[i], 2); - litp += 2; - } - - return NULL; -} - -/* Write a value out to the object file, using the appropriate - endianness. */ - -void -md_number_to_chars (char *buf, valueT val, int n) -{ - number_to_chars_bigendian (buf, val, n); -} - -/* Align a section (I don't know why this is machine dependent). */ - -valueT -md_section_align (asection *seg, valueT addr) -{ - int align = bfd_get_section_alignment (stdoutput, seg); - - return (addr + (1 << align) - 1) & (-1 << align); -} - -/* We don't have any form of relaxing. */ - -int -md_estimate_size_before_relax (fragS *fragp ATTRIBUTE_UNUSED, - asection *seg ATTRIBUTE_UNUSED) -{ - abort (); - return 0; -} - -/* Convert a machine dependent frag. We never generate these. */ - -void -md_convert_frag (bfd *abfd ATTRIBUTE_UNUSED, - asection *sec ATTRIBUTE_UNUSED, - fragS *fragp ATTRIBUTE_UNUSED) -{ - abort (); -} - -/* We have no need to default values of symbols. */ - -symbolS * -md_undefined_symbol (char *name ATTRIBUTE_UNUSED) -{ - return 0; -} - -/* Functions concerning relocs. */ - -/* The location from which a PC relative jump should be calculated, - given a PC relative reloc. */ - -long -md_pcrel_from_section (fixS *fixp, segT sec ATTRIBUTE_UNUSED) -{ - return fixp->fx_frag->fr_address + fixp->fx_where; -} - -/* Apply a fixup to the object code. This is called for all the - fixups we generated by the call to fix_new_exp, above. In the call - above we used a reloc code which was the largest legal reloc code - plus the operand index. Here we undo that to recover the operand - index. At this point all symbol values should be fully resolved, - and we attempt to completely resolve the reloc. If we can not do - that, we determine the correct reloc code and put it back in the - fixup. - - See gas/cgen.c for more sample code and explanations of what's - going on here. */ - -void -md_apply_fix (fixS *fixP, valueT * valP, segT seg) -{ - valueT value = * valP; - - if (fixP->fx_addsy != NULL) - { -#ifdef DEBUG - printf ("\nmd_apply_fix: symbol %s at 0x%x (%s:%d) val=0x%x addend=0x%x\n", - S_GET_NAME (fixP->fx_addsy), - fixP->fx_frag->fr_address + fixP->fx_where, - fixP->fx_file, fixP->fx_line, - S_GET_VALUE (fixP->fx_addsy), value); -#endif - } - else - fixP->fx_done = 1; - - /* Apply fixups to operands. Note that there should be no relocations - for any operands, since no instruction ever takes an operand - that requires reloc. */ - if ((int) fixP->fx_r_type >= (int) BFD_RELOC_UNUSED) - { - int opindex; - const struct i370_operand *operand; - char *where; - i370_insn_t insn; - - opindex = (int) fixP->fx_r_type - (int) BFD_RELOC_UNUSED; - - operand = &i370_operands[opindex]; - -#ifdef DEBUG - printf ("\nmd_apply_fix: fixup operand %s at 0x%x in %s:%d addend=0x%x\n", - operand->name, - fixP->fx_frag->fr_address + fixP->fx_where, - fixP->fx_file, fixP->fx_line, - value); -#endif - /* Fetch the instruction, insert the fully resolved operand - value, and stuff the instruction back again. - fisxp->fx_size is the length of the instruction. */ - where = fixP->fx_frag->fr_literal + fixP->fx_where; - insn.i[0] = bfd_getb32 ((unsigned char *) where); - - if (6 <= fixP->fx_size) - /* Deal with 48-bit insn's. */ - insn.i[1] = bfd_getb32 (((unsigned char *) where)+4); - - insn = i370_insert_operand (insn, operand, (offsetT) value); - bfd_putb32 ((bfd_vma) insn.i[0], (unsigned char *) where); - - if (6 <= fixP->fx_size) - /* Deal with 48-bit insn's. */ - bfd_putb32 ((bfd_vma) insn.i[1], (((unsigned char *) where)+4)); - - /* We are done, right? right !! */ - fixP->fx_done = 1; - if (fixP->fx_done) - /* Nothing else to do here. */ - return; - - /* Determine a BFD reloc value based on the operand information. - We are only prepared to turn a few of the operands into - relocs. In fact, we support *zero* operand relocations ... - Why? Because we are not expecting the compiler to generate - any operands that need relocation. Due to the 12-bit naturew of - i370 addressing, this would be unusual. */ - { - char *sfile; - unsigned int sline; - - /* Use expr_symbol_where to see if this is an expression - symbol. */ - if (expr_symbol_where (fixP->fx_addsy, &sfile, &sline)) - as_bad_where (fixP->fx_file, fixP->fx_line, - "unresolved expression that must be resolved"); - else - as_bad_where (fixP->fx_file, fixP->fx_line, - "unsupported relocation type"); - fixP->fx_done = 1; - return; - } - } - else - { - /* We branch to here if the fixup is not to a symbol that - appears in an instruction operand, but is rather some - declared storage. */ -#ifdef OBJ_ELF - i370_elf_validate_fix (fixP, seg); -#endif -#ifdef DEBUG - printf ("md_apply_fix: reloc case %d in segment %s %s:%d\n", - fixP->fx_r_type, segment_name (seg), fixP->fx_file, fixP->fx_line); - printf ("\tcurrent fixup value is 0x%x \n", value); -#endif - switch (fixP->fx_r_type) - { - case BFD_RELOC_32: - case BFD_RELOC_CTOR: - if (fixP->fx_pcrel) - fixP->fx_r_type = BFD_RELOC_32_PCREL; - /* Fall through. */ - - case BFD_RELOC_RVA: - case BFD_RELOC_32_PCREL: - case BFD_RELOC_32_BASEREL: -#ifdef DEBUG - printf ("\t32 bit relocation at 0x%x\n", - fixP->fx_frag->fr_address + fixP->fx_where); -#endif - md_number_to_chars (fixP->fx_frag->fr_literal + fixP->fx_where, - value, 4); - break; - - case BFD_RELOC_LO16: - case BFD_RELOC_16: - if (fixP->fx_pcrel) - as_bad_where (fixP->fx_file, fixP->fx_line, - "cannot emit PC relative %s relocation%s%s", - bfd_get_reloc_code_name (fixP->fx_r_type), - fixP->fx_addsy != NULL ? " against " : "", - (fixP->fx_addsy != NULL - ? S_GET_NAME (fixP->fx_addsy) - : "")); - - md_number_to_chars (fixP->fx_frag->fr_literal + fixP->fx_where, - value, 2); - break; - - /* This case happens when you write, for example, - lis %r3,(L1-L2)@ha - where L1 and L2 are defined later. */ - case BFD_RELOC_HI16: - if (fixP->fx_pcrel) - abort (); - md_number_to_chars (fixP->fx_frag->fr_literal + fixP->fx_where, - value >> 16, 2); - break; - case BFD_RELOC_HI16_S: - if (fixP->fx_pcrel) - abort (); - md_number_to_chars (fixP->fx_frag->fr_literal + fixP->fx_where, - (value + 0x8000) >> 16, 2); - break; - - case BFD_RELOC_8: - if (fixP->fx_pcrel) - abort (); - - md_number_to_chars (fixP->fx_frag->fr_literal + fixP->fx_where, - value, 1); - break; - - default: - fprintf (stderr, - "Gas failure, reloc value %d\n", fixP->fx_r_type); - fflush (stderr); - abort (); - } - } - - fixP->fx_addnumber = value; -} - -/* Generate a reloc for a fixup. */ - -arelent * -tc_gen_reloc (asection *seg ATTRIBUTE_UNUSED, fixS *fixp) -{ - arelent *reloc; - - reloc = xmalloc (sizeof (arelent)); - - reloc->sym_ptr_ptr = xmalloc (sizeof (asymbol *)); - *reloc->sym_ptr_ptr = symbol_get_bfdsym (fixp->fx_addsy); - reloc->address = fixp->fx_frag->fr_address + fixp->fx_where; - reloc->howto = bfd_reloc_type_lookup (stdoutput, fixp->fx_r_type); - if (reloc->howto == (reloc_howto_type *) NULL) - { - as_bad_where (fixp->fx_file, fixp->fx_line, - "reloc %d not supported by object file format", (int)fixp->fx_r_type); - return NULL; - } - reloc->addend = fixp->fx_addnumber; - -#ifdef DEBUG - printf ("\ngen_reloc(): sym %s (%s:%d) at addr 0x%x addend=0x%x\n", - fixp->fx_addsy->bsym->name, - fixp->fx_file, fixp->fx_line, - reloc->address, reloc->addend); -#endif - - return reloc; -} - -/* The target specific pseudo-ops which we support. */ - -const pseudo_typeS md_pseudo_table[] = -{ - /* Pseudo-ops which must be overridden. */ - { "byte", i370_byte, 0 }, - - { "dc", i370_dc, 0 }, - { "ds", i370_ds, 0 }, - { "rmode", i370_rmode, 0 }, - { "csect", i370_csect, 0 }, - { "dsect", i370_dsect, 0 }, - - /* enable ebcdic strings e.g. for 3270 support */ - { "ebcdic", i370_ebcdic, 0 }, - -#ifdef OBJ_ELF - { "long", i370_elf_cons, 4 }, - { "word", i370_elf_cons, 4 }, - { "short", i370_elf_cons, 2 }, - { "rdata", i370_elf_rdata, 0 }, - { "rodata", i370_elf_rdata, 0 }, - { "lcomm", i370_elf_lcomm, 0 }, -#endif - - /* This pseudo-op is used even when not generating XCOFF output. */ - { "tc", i370_tc, 0 }, - - /* dump the literal pool */ - { "ltorg", i370_ltorg, 0 }, - - /* support the hlasm-style USING directive */ - { "using", i370_using, 0 }, - { "drop", i370_drop, 0 }, - - { NULL, NULL, 0 } -}; - |