aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/scsi/mpt2sas/mpt2sas_base.c
Commit message (Collapse)AuthorAgeFilesLines
* SCSI: mpt2sas: Fix for issue - Unable to boot from the drive connected to HBAsreekanth.reddy@lsi.com2012-10-021-0/+7
| | | | | | | | | | | | | | commit 10cce6d8b5af0b32bc4254ae4a28423a74c0921c upstream. This patch checks whether HBA is SAS2008 B0 controller. if it is a SAS2008 B0 controller then it use IO-APIC interrupt instead of MSIX, as SAS2008 B0 controller doesn't support MSIX interrupts. [jejb: fix whitespace problems] Signed-off-by: Sreekanth Reddy <sreekanth.reddy@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* SCSI: mpt2sas: Fix for Driver oops, when loading driver with max_queue_depth ↵sreekanth.reddy@lsi.com2012-09-141-5/+8
| | | | | | | | | | | | | | | | | | | | | | | | | command line option to a very small value commit 338b131a3269881c7431234855c93c219b0979b6 upstream. If the specified max_queue_depth setting is less than the expected number of internal commands, then driver will calculate the queue depth size to a negitive number. This negitive number is actually a very large number because variable is unsigned 16bit integer. So, the driver will ask for a very large amount of memory for message frames and resulting into oops as memory allocation routines will not able to handle such a large request. So, in order to limit this kind of oops, The driver need to set the max_queue_depth to a scsi mid layer's can_queue value. Then the overall message frames required for IO is minimum of either (max_queue_depth plus internal commands) or the IOC global credits. Signed-off-by: Sreekanth Reddy <sreekanth.reddy@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* SCSI: mpt2sas: Fix for panic happening because of improper memory allocationnagalakshmi.nandigama@lsi.com2012-06-011-3/+3
| | | | | | | | | | | | | | | | | | | | commit e42fafc25fa86c61824e8d4c5e7582316415d24f upstream. The ioc->pfacts member in the IOC structure is getting set to zero following a call to _base_get_ioc_facts due to the memset in that routine. So if the ioc->pfacts was read after a host reset, there would be a NULL pointer dereference. The routine _base_get_ioc_facts is called from context of host reset. The problem in _base_get_ioc_facts is the size of Mpi2IOCFactsReply is 64, whereas the sizeof "struct mpt2sas_facts" is 60, so there is a four byte overflow resulting from the memset. Also, there is memset in _base_get_port_facts using the incorrect structure, it should be "struct mpt2sas_port_facts" instead of Mpi2PortFactsReply. Signed-off-by: Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* SCSI: mpt2sas : Fix for memory allocation error for large host creditsnagalakshmi.nandigama@lsi.com2012-01-251-56/+27
| | | | | | | | | | | | | | | | | | | | commit aff132d95ffe14eca96cab90597cdd010b457af7 upstream. The amount of memory required for tracking chain buffers is rather large, and when the host credit count is big, memory allocation failure occurs inside __get_free_pages. The fix is to limit the number of chains to 100,000. In addition, the number of host credits is limited to 30,000 IOs. However this limitation can be overridden this using the command line option max_queue_depth. The algorithm for calculating the reply_post_queue_depth is changed so that it is equal to (reply_free_queue_depth + 16), previously it was (reply_free_queue_depth * 2). Signed-off-by: Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* mpt2sas: fix non-x86 crash on shutdownNagalakshmi Nandigama2012-01-061-57/+2
| | | | | | | | | | | | | | Upstrem commit: 911ae9434f83e7355d343f6c2be3ef5b00ea7aed There's a bug in the MSIX backup and restore routines that cause a crash on non-x86 (direct access to PCI space not via read/write). These routines are unnecessary and were removed by the above commit, so also remove them from stable to fix the crash. Signed-off-by: Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* mpt2sas: Adding support for customer specific brandingKashyap, Desai2011-10-031-2/+17
| | | | | | | | | commit ab3e5f60d1fc8fe725d02510ff820ff207a8dbef upstream. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* mpt2sas: Fixed Big Indian Issues on 32 bit PPCKashyap, Desai2011-08-151-40/+25
| | | | | | | | | | | | | commit c97951ec46d4b076c2236b77db34eeed6dddb8eb upstream. This patch addresses many endian issues solved by runing sparse with the option __CHECK_ENDIAN__ turned on. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [SCSI] mpt2sas : WarpDrive New product SSS6200 support addedKashyap, Desai2011-05-011-10/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch has Support for the new solid state device product SSS6200 from LSI and relavent features w.r.t SSS6200. The major feature added in this driver is supporting Direct-I/O to the SSS6200 storage.There are some additional changes done to avoid exposing the RAID member disks to the OS and hiding/exposing drives based on the OEM Specific Flag in Manufacturing Page10 (this is required to handle specific changes in the SSS6200 firmware). Each and every changes are listed below. 1. Hiding IR related messages. For SSS6200, the driver is modified not to print IR related events. Even if the debugging is enabled the IR related messages will not be displayed. In some places if there is a need to display a message related to IR the string "IR" is replaced with string "DD" and the string "volume" is replaced with "direct drive". But the function names are not changed hence there are some places where the reference to volume can be seen if debug level is set. 2. Removed RAID transport support In Linux the user can retrieve RAID volume information from the sysfs directory. This support is removed for SSS6200. 3. Direct I/O support. The driver tries to enable direct I/O when a volume is reported to the driver by the firmware through IRCC events and the driver does this just before reporting to the OS, hence all the OS issued I/O can go through direct path if they can, The first validation is to see whether the manufacturing page10 flag is set to expose all drives always. If that is set, the driver will not enable direct I/O and displays the message "DDIO" is disabled globally as drives are exposed. The driver checks whether there is more than one volume in the controller, if so the direct I/O will be disabled globally for all volumes in the controller and the message displayed will be "DDIO is disabled globally as number of drives > 1. If retrieving number of PD is failed the driver will not enable direct I/O and displays the message Failure in computing number of drives DDIO disabled. If memory allocation for RAIDVolumePage0 is failed, the driver will not enable direct I/O and displays the message Memory allocation failure for RVPG0 DDIO disabled. If retrieving RAIDVolumePage0 is failed the driver will not enable direct I/O and displays the message Failure in retrieving RVPG0 DDIO disabled If the number of PD in a volume is greater than 8, then the direct I/O will be disabled. If any of individual drives handle retrieval is failed then the DD-IO will be disabled. If the volume is not RAID0 or if the block size is not 512 then the DD-IO will be disabled. If the volume size is greater than 2TB then the DD-IO will be disabled. If the driver is not able to find a valid stripe exponent using the configured stripe size then the DD-IO will be disabled When the DD-IO is enabled the driver will check every I/O request issued to the storage and checks whether the request is either READ6/WRITE6/READ10/WRITE10, if it is and if the complete I/O transfer is within a stripe size then the I/O is redirected to the drive directly instead of the volume. On completion of every I/O, if the completion is failure means if the reply is address reply with a reply frame associated with it, then the type of I/O will be checked, if the I/O is direct then the I/O will be retried to the volume once. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Reviewed-by: Eric Moore <eric.moore@lsi.com> Reviewed-by: Sathya Prakash <sathya.prakash@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* Fix common misspellingsLucas De Marchi2011-03-311-6/+6
| | | | | | Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
* [SCSI] mpt2sas : Added customer specific display supportKashyap, Desai2011-03-231-0/+49
| | | | | | | Added Vendor specific branding message support. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds2011-03-171-52/+76
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (170 commits) [SCSI] scsi_dh_rdac: Add MD36xxf into device list [SCSI] scsi_debug: add consecutive medium errors [SCSI] libsas: fix ata list corruption issue [SCSI] hpsa: export resettable host attribute [SCSI] hpsa: move device attributes to avoid forward declarations [SCSI] scsi_debug: Logical Block Provisioning (SBC3r26) [SCSI] sd: Logical Block Provisioning update [SCSI] Include protection operation in SCSI command trace [SCSI] hpsa: fix incorrect PCI IDs and add two new ones (2nd try) [SCSI] target: Fix volume size misreporting for volumes > 2TB [SCSI] bnx2fc: Broadcom FCoE offload driver [SCSI] fcoe: fix broken fcoe interface reset [SCSI] fcoe: precedence bug in fcoe_filter_frames() [SCSI] libfcoe: Remove stale fcoe-netdev entries [SCSI] libfcoe: Move FCOE_MTU definition from fcoe.h to libfcoe.h [SCSI] libfc: introduce __fc_fill_fc_hdr that accepts fc_hdr as an argument [SCSI] fcoe, libfc: initialize EM anchors list and then update npiv EMs [SCSI] Revert "[SCSI] libfc: fix exchange being deleted when the abort itself is timed out" [SCSI] libfc: Fixing a memory leak when destroying an interface [SCSI] megaraid_sas: Version and Changelog update ... Fix up trivial conflicts due to whitespace differences in drivers/scsi/libsas/{sas_ata.c,sas_scsi_host.c}
| * [SCSI] mpt2sas: Basic Code Cleanup in mpt2sas_baseKashyap, Desai2011-01-241-52/+50
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Basic Code Cleanup: (1) _base_get_cb_idx and mpt2sas_base_free_smid were reorganized in similar fashion so the order of obtaining the cbx and smid are scsiio, hi_priority, and internal. (2) The hi_priority and internal request queue struct was made smaller by removing the scmd and chain_tracker, thus saving memory allocation. (3) For scsiio request, a new structure was created having the same elements from the former request tracker struct. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * [SCSI] mpt2sas: Add support for Customer specific branding messagesKashyap, Desai2011-01-241-0/+26
| | | | | | | | | | | | | | | | Add support for Customer specific branding messages when device driver loads, based on specific customer subsystem vendor and device Ids Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | [SCSI] mpt2sas: Kernel Panic during Large Topology discovery Kashyap, Desai2011-01-241-2/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There was a configuration page timing out during the initial port enable at driver load time. The port enable would fail, and this would result in the driver unloading itself, meanwhile the driver was accessing freed memory in another context resulting in the panic. The fix is to prevent access to freed memory once the driver had issued the diag reset which woke up the sleeping port enable process. The routine _base_reset_handler was reorganized so the last sleeping process woken up was the port_enable. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Cc: stable@kernel.org Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | [SCSI] mpt2sas: Correct resizing calculation for max_queue_depthKashyap, Desai2011-01-241-3/+3
|/ | | | | | | | | | | | | The ioc->hba_queue_depth is not properly resized when the controller firmware reports that it supports more outstanding IO than what can be fit inside the reply descriptor pool depth. This is reproduced by setting the controller global credits larger than 30,000. The bug results in an incorrect sizing of the queues. The fix is to resize the queue_size by dividing queue_diff by two. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Cc: stable@kernel.org Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: Remove code for TASK_SET_FULL from driver.Kashyap, Desai2010-12-211-4/+0
| | | | | | | | | | | | | | remove support for MPI2_EVENT_TASK_SET_FULL This event is obsoleted, so this processing of this event needs to be removed from the driver. The controller firmware is going to handle TASK_SET_FULL, the driver doesn't need to do anything. Even though we are removing the EVENT handling, the behavour has not changed between driver versions becuase fimrware will still be handling queue throttling, and retrying of commands when the target device queues are full. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: Create a pool of chain buffer instead of dedicated per IOsKashyap, Desai2010-12-211-17/+70
| | | | | | | | | | | | | | Create a pool of chain buffers, instead of dedicated per IO: This enahancment is to address memory allocation failure when asking for more than 2300 IOs per host. There is just not enough contiquious DMA physical memory to make one single allocation to hold both message frames and chain buffers when asking for more than 2300 request. In order to address this problem we will have to allocate memory for each chain buffer in a seperate individual memory allocation, placing each chain element of 128 bytes onto a pool of available chains, which can be shared amoung all request. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: Added loadtime para for IOMissingDelay and DMDKashyap, Desai2010-12-211-0/+100
| | | | | | | | | | | | | Ability to override/set the ReportDeviceMissingDelay and IODeviceMissingDelay from driver: Add new command line option missing_delay, this is an array, where the first element is the device missing delay, and the second element is io missing delay. The driver will program sas iounit page 1 with the new setting when the driver loads. This is programmed to the current and persistent configuration page so this takes immediately, as will be sticky across host reboots. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: Added sanity check for cb_idx and smid access.Kashyap, Desai2010-12-211-1/+7
| | | | | | | | | | | | | | | | | | | | Sometime it is seen that controller firmware returns an invalid system message id (smid). the oops is occurring becuase mpt_callbacks pointer is referenced to either null or invalid virtual address. this is due to cb_idx set incorrectly from routine _base_get_cb_idx. the cb_idx was set incorrectly becuase there is no check to make sure smid is less than maxiumum anticapted smid. to fix this issue, we add a check in _base_get_cb_idx to make sure smid is not greater than ioc->hba_queue_depth. in addition, a similar check was added to make sure the reply address was less than the largest anticapated address. Newer firmware has sovled this issue, however it good to have this sanity check. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] drivers/scsi: Adjust confusing if indentationJulia Lawall2010-09-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Outdent the code following the if. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable braces4@ position p1,p2; statement S1,S2; @@ ( if (...) { ... } | if (...) S1@p1 S2@p2 ) @script:python@ p1 << r.p1; p2 << r.p2; @@ if (p1[0].column == p2[0].column): cocci.print_main("branch",p1) cocci.print_secs("after",p2) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Nick Cheng <nick.cheng@areca.com.tw> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: driver fails to recover from injected PCIe bus errorsEric Moore2010-07-271-0/+13
| | | | | | | | | | | | | | | | | | fixes surrounding PCIe enhanced error handling: (1) We need to reject all request generated internaly inside the driver as well as request arriving from the scsi mid layer when PCIe EEH is active. The fix is to add a per adapter flag called pci_error_recovery which is checked thru out the driver when request are generated. (2) We don't need to call the pci_driver->remove directly from the PCIe callbacks becuase its already called from the PCIe EEH code. In its place we are shutting down the watchdog timer, and flushing back all pending IO. (3) We need to save and restore the pci state across PCIe EEH handling. Signed-off-by: Eric Moore <eric.moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: Copy sense buffer instead of working on direct memory locationKashyap, Desai2010-07-271-1/+5
| | | | | | | | | | | (1) driver was not setting the sense data size prior to sending SCSI_IO, resulting in the 0x31190000 loginfo (2) The driver needs to copy the sense data to local buffer prior to releasing the request message frame. If not, the sense buffer gets overwritten by the next SCSI_IO request. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: Added -ENOMEM return type when allocation failsKashyap, Desai2010-07-271-1/+10
| | | | | | | | | In the driver mpt2sas_base_attach subroutine, we need to add support to return the proper error code when there are memory allocation failures, e.g. returning -ENOMEM. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: Redesign Raid devices event handling using pd_handles per HBAKashyap, Desai2010-07-271-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Actual problem : Driver may receiving the top level expander removal event prior to all the individual PD removal events, hence the driver is breaking down all the PDs in advanced to the actaul PD UNHIDE event. Driver sends multiple Target Resets to the same volume handle for each individual PD removal. FIX DESCRIPTION: To fix this issue, the entire PD device handshake protocal has to be moved to interrupt context so the breakdown occurs immediately after the actual UNHIDE event arrives. The driver will only issue one Target Reset to the volume handle, occurring after the FAILED or MISSING volume status event arrives from interrupt context. For the PD UNHIDE event, the driver will issue target resets to the PD handles, followed by OP_REMOVE. The driver will set the "deteleted" flag during interrupt context. A "pd_handle" bitmask was introduced so the driver has a list of known pds during entire life of the PD; this replaces the "hidden_raid_component" flag handle in the sas_device object. Each bit in the bitmask represents a device handle. The bit in the bitmask would be toggled ON/OFF when the HIDE/UNHIDE events arrive; also this pd_handle bitmask would bould be refreshed across host resets. Here we kept older behavior of sending target reset to volume when there is a single drive pull, wait for the reply, then send target resets to the PDs. We kept this behavior so the driver will behave the same for older versions of firmware. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: print level KERN_DEBUG is replaced by KERN_INFOKashyap, Desai2010-07-271-41/+41
| | | | | | | Converting print level from MPT2SAS_DEBUG_FMT to MPT2SAS_INFO_FMT. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: Added sysfs support for trace bufferKashyap, Desai2010-07-271-4/+6
| | | | | | | | | | | | | | | | | | | Added support so the diag ring buffer can be pulled via sysfs Added three new shost attributes: host_trace_buffer, host_trace_buffer_enable, and host_trace_buffer_size. The host_trace_buffer_enable attribute is used to either post or release the trace buffers. The host_trace_buffer_size attribute contains the size of the trace buffer. The host_trace_buffer atttribute contains a maximum 4KB window of the buffer. In order to read the entire host buffer, you will need to write the offset to host_trace_buffer prior to reading it. release the host buffer, then write the entire host buffer contents to a file. In addition to this enhancement, we moved the automatic posting of host buffers at driver load time to be called prior to port_enable, instead of after. That way discovery is available in the host buffer. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: Added sysfs counter for ioc resetKashyap, Desai2010-07-271-2/+7
| | | | | | | | Added a new sysfs shost attribute called ioc_reset_count. This will keep count of host resets (both diagnostic and message unit). Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: staged device discovery. disable_discovery module parameter ↵Kashyap, Desai2010-07-271-0/+7
| | | | | | | | | | | | | | | is added. Added command line option called disable_discovery. When enabled on the command line, the driver will not send a port_enable when loaded for the first time. If port_enable is not called, then there is no discovery of devices, as well as the sas topology. Then later if one desires to invoke discovery, then they will need to issue a diagnostic reset. A diagnostic reset can be issued various ways. One of the way is throught sysfs. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: Hold Controller reset when another reset is in progressKashyap, Desai2010-07-271-7/+22
| | | | | | | | | | | | | Driver should not allow multiple host reset when already host reset is in progress. It is possible that host reset was sent by scsi mid layer while there was already an host reset active, either issued via IOCTL interface or internaly, like a config page timeout. Since there was a host reset active, the driver would return a FAILED response to the scsi mid layer. The solution is make sure pending host resets will wait for the active host reset to complete before returning control back up the call stack. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* kernel-wide: replace USHORT_MAX, SHORT_MAX and SHORT_MIN with USHRT_MAX, ↵Alexey Dobriyan2010-05-251-1/+1
| | | | | | | | | | | | | | | | SHRT_MAX and SHRT_MIN - C99 knows about USHRT_MAX/SHRT_MAX/SHRT_MIN, not USHORT_MAX/SHORT_MAX/SHORT_MIN. - Make SHRT_MIN of type s16, not int, for consistency. [akpm@linux-foundation.org: fix drivers/dma/timb_dma.c] [akpm@linux-foundation.org: fix security/keys/keyring.c] Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [SCSI] mpt2sas: Check for NULL pointer before free_pages is added.Kashyap, Desai2010-04-111-1/+4
| | | | | | | Added check before free_pages just to make sure ioc->scsi_lookup is not NULL. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: Added support for PCIe Advanced Error Recovery.Kashyap, Desai2010-04-111-0/+6
| | | | | | | | | | | | Added support in the driver to support EEH and PCIe Advanced Error Recovery. This involves adding new pci_error_handler interface for recovering the controller from PCI Bus errors, such as SERR and PERR. Some tools are available for simulating PCI errors in order to validate this interface: http://www.kernel.org/pub/linux/utils/pci/aer-inject Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: Copyright 2010.Kashyap, Desai2010-04-111-1/+1
| | | | | | | Copyright changes for year 2010. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: return -ENOMEM if memory allocation failed.Kashyap, Desai2010-04-111-1/+10
| | | | | | | Added proper return type values in case memory allocation failed. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: Fix for little endianKashyap, Desai2010-04-111-3/+19
| | | | | | | | 1. Fixes for little endian issues. 2. Now Debug info for Discovery event is more readable. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: Early return from function if shost is in recovery.Kashyap, Desai2010-04-111-0/+2
| | | | | | | Aded checks for shost_recovery flag for early return from function. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: Use of get_free_pages for huge memorary allocation.Kashyap, Desai2010-04-111-5/+7
| | | | | | | | | | use the get_free_pages API for larger contigious physical memory chunk. Also, the ioc->chain_depth need to be changed from a 16bit to 32bit variable because the number of chains will exceed 64k when the queue depth is large. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: Corrected time stampKashyap, Desai2010-04-111-2/+2
| | | | | | | | | | | | incorrect timestamp on 32 bit platforms: The upper 32 bit of the timestamp was getting truncated when converting seconds to milliseconds, which was due to the variable being long. To fix the problem, the variable needs to be u64. Also the microseconds conversion to milliseconds was incorrect; it should be divide by 1000 instead of divide by 8. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: use correct pci_resource_flag for comparisonRichard A Lary2010-04-111-10/+13
| | | | | | | | | | This patch replaces incorrect base address space flag with correct IO resource flag. Also, performs check of memory resource to validate resource before using. Signed-off-by: Richard A Lary <rlary@linux.vnet.ibm.com> Acked-by: "Desai, Kashyap" <Kashyap.Desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: RESCAN Barrier work is added in case of HBA reset.Kashyap, Desai2010-04-111-2/+3
| | | | | | | | | | | | | | | | | | Add the cancel_pending_work flag from the fw_event_work structure, and then to set the flag during host reset, check the flag later from work threads context and if cancel_pending_work_flag is set ingore those events. Now Rescan after host reset is changed. Added special task MPT2SAS_RESCAN_AFTER_HOST_RESET. This task will be queued at the time of HBA reset. this task is treated as barrier. All work after MPT2SAS_RESCAN_AFTER_HOST_RESET will be treated as new work and will be server by callback handle. If host_recovery is going on while running RESCAN task, it will wait for shos_recovery_done completion which will be called from HBA reset DONE context. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Reviewed-by: Eric Moore <eric.moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: Set ioc->fwfault_debug to the cmd line option ↵Kashyap, Desai2010-02-081-2/+3
| | | | | | | | | | | | mpt2sas_fwfault_debug. (1) change the formentioned string from logging_level to fwfault_debug (2) set ioc->fwfault_debug to the command line option mpt2sas_fwfault_debug setting at driver load time. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Reviewed-by: Eric Moore <eric.moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: User resource_size_t instead of unsigned longKashyap, Desai2010-02-081-5/+8
| | | | | | | | | | | | | Use resource_size_t to define the type resource for the system interface register set. The existing implementation was using "unsigned long" which would be 32 bit in 32 bit OS. If 32 bit OS is using 64 bit physical address space for the system interface register set, we need to shift to using resource_size_t which takes care of physical address space. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Reviewed-by: Eric Moore <eric.moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: add missing initialization of scsih_cmdsKashyap, Desai2009-12-101-0/+5
| | | | | | | | Internal command scsih_cmds init is included in mpt2sas_base_attach. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Cc: Stable Tree <stable@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas : PPC (power pc) endian bug fix'sKashyap, Desai2009-10-291-1/+3
| | | | | | | | | | | | | | | | | | (1) EEDP(End to End data protection) was not working. This was due to not setting EEDP BlockSize and Flags to little endian format in the message frame. (2) Some expander sysfs attributes were not getting set properly. The sas format was not getting set due to endian issues with sas_format field in the struct rep_manu_reply. Since sas_format was not set properly, the component_vendor_id, component_revision_id, and component_id were not set. (3) In _transport_smp_handler: we don't need to convert the smid from little endian to cpu prior to calling mpt2sas_base_free_smid, because its allready in cpu format. (4) Some loginfos and ioc status were not xonverted from little endian to cpu. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: Eric Moore <Eric.moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: mpt2sas_base_get_sense_buffer_dma should be returning little ↵Kashyap, Desai2009-10-291-3/+4
| | | | | | | | | | | | | endian cpu_to_le64 when calculating the physical dma address. This will properly handle endianess on big endian systems. The return value of this function was changed from dma_addr_t to __le64. Remove the typecasting of u32 when setting the SenseBufferLowAddress, since its already in __le32 format. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: Eric Moore <Eric.moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: Retrieve the ioc facts prior to putting the controller into ↵Kashyap, Desai2009-10-291-2/+2
| | | | | | | | | | | | | | READY state The driver needs to retrieve the ioc facts prior to putting the controller into READY state. The current design is calling ioc facts after putting the controller into READY state, which means the driver is sending a diag reset instead of message unit reset becuase the capability information is not yet available. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: Eric Moore <Eric.moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: Added support to set the TimeStamp when sending ioc_initKashyap, Desai2009-10-291-0/+9
| | | | | | | Added support to set the TimeStamp when sending ioc_init. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: Eric Moore <Eric.moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: Add Extended Type for Diagnostic Buffer supportKashyap, Desai2009-10-291-4/+11
| | | | | | | | | | | Added tests for registry entries of EXBuffSize, EXImmed, and EXType to support the new Extended diag buffer type. Modified code where necessary to handle the new ExtendedType field in the F/W diagnostic Post and Release messages. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: Eric Moore <Eric.moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: Added command line option diag_buffer_enable.Kashyap, Desai2009-10-291-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | Added command line option diag_buffer_enable. When the command line option is set, the driver will automatically post diag buffers at driver load time. The command line option diag_buffer_enable is bitwise, so it's possible to enable both and/or snapshot + trace buffers. For trace, the driver will allocate 1MB buffer, whereas for snapshot its 2MB. The purpose for this is so the enduser doesn't have to manually use an application to setup diag buffers for debugging firmware related issues. Here is some examples trace: # insmod mpt2sas.ko diag_buffer_enable=1 snapshot: # insmod mpt2sas.ko diag_buffer_enable=2 both trace and snapshot: # insmod mpt2sas.ko diag_buffer_enable=3 Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: Eric Moore <Eric.moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: Fixed some of the commentKashyap, Desai2009-10-291-10/+10
| | | | | | | | | Fixed some of the comments sections for some of the function so "@ioc: pointer to scsi command object" was changed to "@ioc: per adapter object" Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: Eric Moore <Eric.moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-21 11:24:16 +0000