diff options
Diffstat (limited to 'Documentation/usb')
| -rw-r--r-- | Documentation/usb/power-management.txt | 22 |
1 files changed, 17 insertions, 5 deletions
diff --git a/Documentation/usb/power-management.txt b/Documentation/usb/power-management.txt index e48ea1d5101..ad642615ad4 100644 --- a/Documentation/usb/power-management.txt +++ b/Documentation/usb/power-management.txt @@ -313,11 +313,13 @@ three of the methods listed above. In addition, a driver indicates that it supports autosuspend by setting the .supports_autosuspend flag in its usb_driver structure. It is then responsible for informing the USB core whenever one of its interfaces becomes busy or idle. The -driver does so by calling these three functions: +driver does so by calling these five functions: int usb_autopm_get_interface(struct usb_interface *intf); void usb_autopm_put_interface(struct usb_interface *intf); int usb_autopm_set_interface(struct usb_interface *intf); + int usb_autopm_get_interface_async(struct usb_interface *intf); + void usb_autopm_put_interface_async(struct usb_interface *intf); The functions work by maintaining a counter in the usb_interface structure. When intf->pm_usage_count is > 0 then the interface is @@ -330,10 +332,12 @@ associated with the device itself rather than any of its interfaces. This field is used only by the USB core.) The driver owns intf->pm_usage_count; it can modify the value however -and whenever it likes. A nice aspect of the usb_autopm_* routines is -that the changes they make are protected by the usb_device structure's -PM mutex (udev->pm_mutex); however drivers may change pm_usage_count -without holding the mutex. +and whenever it likes. A nice aspect of the non-async usb_autopm_* +routines is that the changes they make are protected by the usb_device +structure's PM mutex (udev->pm_mutex); however drivers may change +pm_usage_count without holding the mutex. Drivers using the async +routines are responsible for their own synchronization and mutual +exclusion. usb_autopm_get_interface() increments pm_usage_count and attempts an autoresume if the new value is > 0 and the @@ -348,6 +352,14 @@ without holding the mutex. is suspended, and it attempts an autosuspend if the value is <= 0 and the device isn't suspended. + usb_autopm_get_interface_async() and + usb_autopm_put_interface_async() do almost the same things as + their non-async counterparts. The differences are: they do + not acquire the PM mutex, and they use a workqueue to do their + jobs. As a result they can be called in an atomic context, + such as an URB's completion handler, but when they return the + device will not generally not yet be in the desired state. + There also are a couple of utility routines drivers can use: usb_autopm_enable() sets pm_usage_cnt to 0 and then calls |