diff options
| -rw-r--r-- | arch/powerpc/boot/dts/mgsuvd.dts | 163 | ||||
| -rw-r--r-- | arch/powerpc/configs/mgsuvd_defconfig | 81 | ||||
| -rw-r--r-- | arch/powerpc/platforms/8xx/Kconfig | 6 | ||||
| -rw-r--r-- | arch/powerpc/platforms/8xx/Makefile | 1 | ||||
| -rw-r--r-- | arch/powerpc/platforms/8xx/mgsuvd.c | 92 |
5 files changed, 0 insertions, 343 deletions
diff --git a/arch/powerpc/boot/dts/mgsuvd.dts b/arch/powerpc/boot/dts/mgsuvd.dts deleted file mode 100644 index e4fc53ab42b..00000000000 --- a/arch/powerpc/boot/dts/mgsuvd.dts +++ /dev/null @@ -1,163 +0,0 @@ -/* - * MGSUVD Device Tree Source - * - * Copyright 2008 DENX Software Engineering GmbH - * Heiko Schocher <hs@denx.de> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -/dts-v1/; -/ { - model = "MGSUVD"; - compatible = "keymile,mgsuvd"; - #address-cells = <1>; - #size-cells = <1>; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,852@0 { - device_type = "cpu"; - reg = <0>; - d-cache-line-size = <16>; - i-cache-line-size = <16>; - d-cache-size = <8192>; - i-cache-size = <8192>; - timebase-frequency = <0>; /* Filled in by u-boot */ - bus-frequency = <0>; /* Filled in by u-boot */ - clock-frequency = <0>; /* Filled in by u-boot */ - interrupts = <15 2>; /* decrementer interrupt */ - interrupt-parent = <&PIC>; - }; - }; - - memory { - device_type = "memory"; - reg = <00000000 0x4000000>; /* Filled in by u-boot */ - }; - - localbus@fff00100 { - compatible = "fsl,mpc852-localbus", "fsl,pq1-localbus", "simple-bus"; - #address-cells = <2>; - #size-cells = <1>; - reg = <0xfff00100 0x40>; - - ranges = <0 0 0xf0000000 0x01000000>; /* Filled in by u-boot */ - - flash@0,0 { - compatible = "cfi-flash"; - reg = <0 0 0x1000000>; - #address-cells = <1>; - #size-cells = <1>; - bank-width = <1>; - device-width = <1>; - partition@0 { - label = "u-boot"; - reg = <0 0x80000>; - }; - partition@80000 { - label = "env"; - reg = <0x80000 0x20000>; - }; - partition@a0000 { - label = "kernel"; - reg = <0xa0000 0x1e0000>; - }; - partition@280000 { - label = "dtb"; - reg = <0x280000 0x20000>; - }; - partition@2a0000 { - label = "root"; - reg = <0x2a0000 0x500000>; - }; - partition@7a0000 { - label = "user"; - reg = <0x7a0000 0x860000>; - }; - }; - }; - - soc@fff00000 { - compatible = "fsl,mpc852", "fsl,pq1-soc", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - ranges = <0 0xfff00000 0x00004000>; - - PIC: interrupt-controller@0 { - interrupt-controller; - #interrupt-cells = <2>; - reg = <0 24>; - compatible = "fsl,mpc852-pic", "fsl,pq1-pic"; - }; - - cpm@9c0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc852-cpm", "fsl,cpm1", "simple-bus"; - interrupts = <0>; /* cpm error interrupt */ - interrupt-parent = <&CPM_PIC>; - reg = <0x9c0 10>; - ranges; - - muram@2000 { - compatible = "fsl,cpm-muram"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x2000 0x2000>; - - data@0 { - compatible = "fsl,cpm-muram-data"; - reg = <0x800 0x1800>; - }; - }; - - brg@9f0 { - compatible = "fsl,mpc852-brg", - "fsl,cpm1-brg", - "fsl,cpm-brg"; - reg = <0x9f0 0x10>; - clock-frequency = <0>; /* Filled in by u-boot */ - }; - - CPM_PIC: interrupt-controller@930 { - interrupt-controller; - #interrupt-cells = <1>; - interrupts = <5 2 0 2>; - interrupt-parent = <&PIC>; - reg = <0x930 0x20>; - compatible = "fsl,cpm1-pic"; - }; - - /* MON-1 */ - serial@a80 { - device_type = "serial"; - compatible = "fsl,cpm1-smc-uart"; - reg = <0xa80 0x10 0x3fc0 0x40>; - interrupts = <4>; - interrupt-parent = <&CPM_PIC>; - fsl,cpm-brg = <1>; - fsl,cpm-command = <0x0090>; - current-speed = <0>; /* Filled in by u-boot */ - }; - - ethernet@a40 { - device_type = "network"; - compatible = "fsl,mpc866-scc-enet", - "fsl,cpm1-scc-enet"; - reg = <0xa40 0x18 0x3e00 0x100>; - local-mac-address = [ 00 00 00 00 00 00 ]; /* Filled in by u-boot */ - interrupts = <28>; - interrupt-parent = <&CPM_PIC>; - fsl,cpm-command = <0x80>; - fixed-link = <0 0 10 0 0>; - }; - }; - }; -}; diff --git a/arch/powerpc/configs/mgsuvd_defconfig b/arch/powerpc/configs/mgsuvd_defconfig deleted file mode 100644 index 2a490626015..00000000000 --- a/arch/powerpc/configs/mgsuvd_defconfig +++ /dev/null @@ -1,81 +0,0 @@ -CONFIG_PPC_8xx=y -CONFIG_EXPERIMENTAL=y -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_EXPERT=y -# CONFIG_SYSCTL_SYSCALL is not set -# CONFIG_HOTPLUG is not set -# CONFIG_BUG is not set -# CONFIG_BASE_FULL is not set -# CONFIG_EPOLL is not set -# CONFIG_VM_EVENT_COUNTERS is not set -CONFIG_SLAB=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_PPC_MGSUVD=y -CONFIG_8xx_COPYBACK=y -CONFIG_8xx_CPU6=y -CONFIG_I2C_SPI_SMC1_UCODE_PATCH=y -CONFIG_HZ_1000=y -CONFIG_MATH_EMULATION=y -CONFIG_SPARSE_IRQ=y -# CONFIG_SECCOMP is not set -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_PNP=y -CONFIG_SYN_COOKIES=y -# CONFIG_INET_LRO is not set -# CONFIG_IPV6 is not set -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_OF_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_GEOMETRY=y -# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_STAA=y -CONFIG_MTD_PHYSMAP_OF=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -# CONFIG_MISC_DEVICES is not set -CONFIG_NETDEVICES=y -CONFIG_FIXED_PHY=y -CONFIG_NET_ETHERNET=y -CONFIG_FS_ENET=y -# CONFIG_FS_ENET_HAS_FEC is not set -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_INPUT is not set -# CONFIG_SERIO is not set -# CONFIG_VT is not set -CONFIG_SERIAL_CPM=y -CONFIG_SERIAL_CPM_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set -CONFIG_GEN_RTC=y -# CONFIG_HWMON is not set -# CONFIG_USB_SUPPORT is not set -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set -CONFIG_INOTIFY=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_CRC_CCITT=y -CONFIG_DEBUG_FS=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -# CONFIG_CRYPTO_ANSI_CPRNG is not set diff --git a/arch/powerpc/platforms/8xx/Kconfig b/arch/powerpc/platforms/8xx/Kconfig index dd35ce081cf..ee56a9ea6a7 100644 --- a/arch/powerpc/platforms/8xx/Kconfig +++ b/arch/powerpc/platforms/8xx/Kconfig @@ -49,12 +49,6 @@ config PPC_ADDER875 This enables support for the Analogue & Micro Adder 875 board. -config PPC_MGSUVD - bool "MGSUVD" - select CPM1 - help - This enables support for the Keymile MGSUVD board. - config TQM8XX bool "TQM8XX" select CPM1 diff --git a/arch/powerpc/platforms/8xx/Makefile b/arch/powerpc/platforms/8xx/Makefile index a491fe6b94f..76a81c3350a 100644 --- a/arch/powerpc/platforms/8xx/Makefile +++ b/arch/powerpc/platforms/8xx/Makefile @@ -6,5 +6,4 @@ obj-$(CONFIG_MPC885ADS) += mpc885ads_setup.o obj-$(CONFIG_MPC86XADS) += mpc86xads_setup.o obj-$(CONFIG_PPC_EP88XC) += ep88xc.o obj-$(CONFIG_PPC_ADDER875) += adder875.o -obj-$(CONFIG_PPC_MGSUVD) += mgsuvd.o obj-$(CONFIG_TQM8XX) += tqm8xx_setup.o diff --git a/arch/powerpc/platforms/8xx/mgsuvd.c b/arch/powerpc/platforms/8xx/mgsuvd.c deleted file mode 100644 index ca3cb071772..00000000000 --- a/arch/powerpc/platforms/8xx/mgsuvd.c +++ /dev/null @@ -1,92 +0,0 @@ -/* - * - * Platform setup for the Keymile mgsuvd board - * - * Heiko Schocher <hs@denx.de> - * - * Copyright 2008 DENX Software Engineering GmbH - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -#include <linux/ioport.h> -#include <linux/of_platform.h> - -#include <asm/io.h> -#include <asm/machdep.h> -#include <asm/processor.h> -#include <asm/cpm1.h> -#include <asm/prom.h> -#include <asm/fs_pd.h> - -#include "mpc8xx.h" - -struct cpm_pin { - int port, pin, flags; -}; - -static __initdata struct cpm_pin mgsuvd_pins[] = { - /* SMC1 */ - {CPM_PORTB, 24, CPM_PIN_INPUT}, /* RX */ - {CPM_PORTB, 25, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */ - - /* SCC3 */ - {CPM_PORTA, 10, CPM_PIN_INPUT}, - {CPM_PORTA, 11, CPM_PIN_INPUT}, - {CPM_PORTA, 3, CPM_PIN_INPUT}, - {CPM_PORTA, 2, CPM_PIN_INPUT}, - {CPM_PORTC, 13, CPM_PIN_INPUT}, -}; - -static void __init init_ioports(void) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(mgsuvd_pins); i++) { - struct cpm_pin *pin = &mgsuvd_pins[i]; - cpm1_set_pin(pin->port, pin->pin, pin->flags); - } - - setbits16(&mpc8xx_immr->im_ioport.iop_pcso, 0x300); - cpm1_clk_setup(CPM_CLK_SCC3, CPM_CLK5, CPM_CLK_RX); - cpm1_clk_setup(CPM_CLK_SCC3, CPM_CLK6, CPM_CLK_TX); - cpm1_clk_setup(CPM_CLK_SMC1, CPM_BRG1, CPM_CLK_RTX); -} - -static void __init mgsuvd_setup_arch(void) -{ - cpm_reset(); - init_ioports(); -} - -static __initdata struct of_device_id of_bus_ids[] = { - { .compatible = "simple-bus" }, - {}, -}; - -static int __init declare_of_platform_devices(void) -{ - of_platform_bus_probe(NULL, of_bus_ids, NULL); - return 0; -} -machine_device_initcall(mgsuvd, declare_of_platform_devices); - -static int __init mgsuvd_probe(void) -{ - unsigned long root = of_get_flat_dt_root(); - return of_flat_dt_is_compatible(root, "keymile,mgsuvd"); -} - -define_machine(mgsuvd) { - .name = "MGSUVD", - .probe = mgsuvd_probe, - .setup_arch = mgsuvd_setup_arch, - .init_IRQ = mpc8xx_pics_init, - .get_irq = mpc8xx_get_irq, - .restart = mpc8xx_restart, - .calibrate_decr = mpc8xx_calibrate_decr, - .set_rtc_time = mpc8xx_set_rtc_time, - .get_rtc_time = mpc8xx_get_rtc_time, -}; |