diff options
| -rw-r--r-- | Documentation/dvb/README.flexcop | 279 | ||||
| -rw-r--r-- | drivers/media/dvb/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/media/dvb/b2c2/Kconfig | 37 | ||||
| -rw-r--r-- | drivers/media/dvb/b2c2/Makefile | 11 | ||||
| -rw-r--r-- | drivers/media/dvb/b2c2/flexcop-common.h | 161 | ||||
| -rw-r--r-- | drivers/media/dvb/b2c2/flexcop-dma.c | 149 | ||||
| -rw-r--r-- | drivers/media/dvb/b2c2/flexcop-eeprom.c | 157 | ||||
| -rw-r--r-- | drivers/media/dvb/b2c2/flexcop-fe-tuner.c | 403 | ||||
| -rw-r--r-- | drivers/media/dvb/b2c2/flexcop-hw-filter.c | 198 | ||||
| -rw-r--r-- | drivers/media/dvb/b2c2/flexcop-i2c.c | 204 | ||||
| -rw-r--r-- | drivers/media/dvb/b2c2/flexcop-misc.c | 66 | ||||
| -rw-r--r-- | drivers/media/dvb/b2c2/flexcop-pci.c | 365 | ||||
| -rw-r--r-- | drivers/media/dvb/b2c2/flexcop-reg.h | 700 | ||||
| -rw-r--r-- | drivers/media/dvb/b2c2/flexcop-sram.c | 403 | ||||
| -rw-r--r-- | drivers/media/dvb/b2c2/flexcop-usb.c | 530 | ||||
| -rw-r--r-- | drivers/media/dvb/b2c2/flexcop-usb.h | 116 | ||||
| -rw-r--r-- | drivers/media/dvb/b2c2/flexcop.c | 288 | ||||
| -rw-r--r-- | drivers/media/dvb/b2c2/flexcop.h | 30 |
18 files changed, 4098 insertions, 1 deletions
diff --git a/Documentation/dvb/README.flexcop b/Documentation/dvb/README.flexcop new file mode 100644 index 00000000000..9ec735714e4 --- /dev/null +++ b/Documentation/dvb/README.flexcop @@ -0,0 +1,279 @@ +This README escorted the skystar2-driver rewriting procedure. It describes the +state of the new flexcop-driver set and some internals are written down here +too. + +How to do something in here? +============================ + +make -f Makefile.t +make -C ../build-2.6 +./in.sh # load the drivers +./rm.sh # unload the drivers + +Please read this file, if you want to contribute. + +This document hopefully describes things about the flexcop and its +device-offsprings. Goal is to write a easy-to-write and easy-to-read set of +drivers based on the skystar2.c and other information. + +This directory is temporary. It is used for rewriting the skystar2.c and to +create shared code, which then can be used by the usb box as well. + +Remark: flexcop-pci.c was a copy of skystar2.c, but every line has been +touched and rewritten. + +General coding processing +========================= + +We should proceed as follows (as long as no one complains): + +0) Think before start writing code! + +1) rewriting the skystar2.c with the help of the flexcop register descriptions +and splitting up the files to a pci-bus-part and a flexcop-part. +The new driver will be called b2c2-flexcop-pci.ko/b2c2-flexcop-usb.ko for the +device-specific part and b2c2-flexcop.ko for the common flexcop-functions. + +2) Search for errors in the leftover of flexcop-pci.c (compare with pluto2.c +and other pci drivers) + +3) make some beautification (see 'Improvements when rewriting (refactoring) is +done') + +4) Testing the new driver and maybe substitute the skystar2.c with it, to reach +a wider tester audience. + +5) creating an usb-bus-part using the already written flexcop code for the pci +card. + +Idea: create a kernel-object for the flexcop and export all important +functions. This option saves kernel-memory, but maybe a lot of functions have +to be exported to kernel namespace. + + +Current situation +================= + +0) Done :) +1) Done (some minor issues left) +2) Done +3) Not ready yet, more information is necessary +4) next to be done (see the table below) +5) USB driver is working (yes, there are some minor issues) + +What seems to be ready? +----------------------- + +1) Rewriting +1a) i2c is cut off from the flexcop-pci.c and seems to work +1b) moved tuner and demod stuff from flexcop-pci.c to flexcop-tuner-fe.c +1c) moved lnb and diseqc stuff from flexcop-pci.c to flexcop-tuner-fe.c +1e) eeprom (reading MAC address) +1d) sram (no dynamic sll size detection (commented out) (using default as JJ told me)) +1f) misc. register accesses for reading parameters (e.g. resetting, revision) +1g) pid/mac filter (flexcop-hw-filter.c) +1i) dvb-stuff initialization in flexcop.c (done) +1h) dma stuff (now just using the size-irq, instead of all-together, to be done) +1j) remove flexcop initialization from flexcop-pci.c completely (done) +1l) use a well working dma IRQ method (done, see 'Known bugs and problems and TODO') +1k) cleanup flexcop-files (remove unused EXPORT_SYMBOLs, make static from +non-static where possible, moved code to proper places) + +2) Search for errors in the leftover of flexcop-pci.c (partially done) +5a) add MAC address reading + +What to do in the near future? +-------------------------------------- +(no special order here) + + +5) USB driver +5b) optimize isoc-transfer (submitting/killing isoc URBs when transfer is starting) +5c) feeding of ISOC data to the software demux (format of the isochronous data +and speed optimization, no real error) + +Testing changes +--------------- + +O = item is working +P = item is partially working +X = item is not working +N = item does not apply here +<empty field> = item need to be examined + + | PCI | USB +item | mt352 | nxt2002 | stv0299 | mt312 | mt352 | nxt2002 | stv0299 | mt312 +-------+-------+---------+---------+-------+-------+---------+---------+------- +1a) | O | | | | N | N | N | N +1b) | O | | | | | | O | +1c) | N | N | | | N | N | O | +1d) | O | O +1e) | O | O +1f) | P +1g) | O +1h) | P | +1i) | O | N +1j) | O | N +1l) | O | N +2) | O | N +5a) | N | O +5b)* | N | +5c)* | N | + +* - not done yet + +Known bugs and problems and TODO +-------------------------------- + +1g/h/l) when pid filtering is enabled on the pci card + +DMA usage currently: + The DMA is splitted in 2 equal-sized subbuffers. The Flexcop writes to first + address and triggers an IRQ when it's full and starts writing to the second + address. When the second address is full, the IRQ is triggered again, and + the flexcop writes to first address again, and so on. + The buffersize of each address is currently 640*188 bytes. + + Problem is, when using hw-pid-filtering and doing some low-bandwidth + operation (like scanning) the buffers won't be filled enough to trigger + the IRQ. That's why: + + When PID filtering is activated, the timer IRQ is used. Every 1.97 ms the IRQ + is triggered. Is the current write address of DMA1 different to the one + during the last IRQ, then the data is passed to the demuxer. + + There is an additional DMA-IRQ-method: packet count IRQ. This isn't + implemented correctly yet. + + The solution is to disable HW PID filtering, but I don't know how the DVB + API software demux behaves on slow systems with 45MBit/s TS. + +Solved bugs :) +-------------- +1g) pid-filtering (somehow pid index 4 and 5 (EMM_PID and ECM_PID) aren't +working) +SOLUTION: also index 0 was affected, because net_translation is done for +these indexes by default + +5b) isochronous transfer does only work in the first attempt (for the Sky2PC USB, +Air2PC is working) +SOLUTION: the flexcop was going asleep and never really woke up again (don't +know if this need fixes, see flexcop-fe-tuner.c:flexcop_sleep) + +Improvements when rewriting (refactoring) is done +================================================= + +- split sleeping of the flexcop (misc_204.ACPI3_sig = 1;) from lnb_control + (enable sleeping for other demods than dvb-s) +- add support for CableStar (stv0297 Microtune 203x/ALPS) + +Debugging +--------- +- add verbose debugging to skystar2.c (dump the reg_dw_data) and compare it + with this flexcop, this is important, because i2c is now using the + flexcop_ibi_value union from flexcop-reg.h (do you have a better idea for + that, please tell us so). + +Everything which is identical in the following table, can be put into a common +flexcop-module. + + PCI USB +------------------------------------------------------------------------------- +Different: +Register access: accessing IO memory USB control message +I2C bus: I2C bus of the FC USB control message +Data transfer: DMA isochronous transfer +EEPROM transfer: through i2c bus not clear yet + +Identical: +Streaming: accessing registers +PID Filtering: accessing registers +Sram destinations: accessing registers +Tuner/Demod: I2C bus +DVB-stuff: can be written for common use + +Restrictions: +============ + +We need to create a bus-specific-struct and a flexcop-struct. + +bus-specific-struct: + +struct flexcop_pci +... + +struct flexcop_usb +... + + +struct flexcop_device { + void *bus_specific; /* container for bus-specific struct */ +... +} + +PCI i2c can read/write max 4 bytes at a time, USB can more + +Functions +========= + +Syntax +------ + +- Flexcop functions will be called "flexcop(_[a-z0-9]+)+" and exported as such + if needed. +- Flexcop-device functions will be called "flexcop_device(_[a-z0-9]+)+" and + exported as such if needed. +- Both will be compiled to b2c2-flexcop.ko and their source can be found in the + flexcop*.[hc] + +Callbacks and exports +--------------------- + +Bus-specific functions will be given as callbacks (function pointers) to the +flexcop-module. (within the flexcop_device-struct) + +Initialization process +====================== + +b2c2-flexcop.ko is loaded +b2c2-flexcop-<bus>.ko is loaded + +suppose a device is found: +malloc flexcop and the bus-specific variables (via flexcop_device_malloc) +fill the bus-specific variable +fill the flexcop variable (especially the bus-specific callbacks) +bus-specific initialization + - ... +do the common initialization (via flexcop_device_initialize) + - reset the card + - determine flexcop type (II, IIB, III) + - hw_filters (bus dependent) + - 0x204 + - set sram size + - create the dvb-stuff + - create i2c stuff + - frontend-initialization +done +bus specific: + - media_destination (this and the following 3 are bus specific) + - cai_dest + - cao_dest + - net_destination + +Bugs fixed while rewriting the driver +===================================== + +- EEPROM access (to read the MAC address) was fixed to death some time last + year. (fixed here and in skystar2.c) (Bjarne, this was the piece of code + (fix-chipaddr) we were wondering about) + + +Acknowledgements (just for the rewriting part) +================ + +Bjarne Steinsbo thought a lot in the first place of the pci part for this code +sharing idea. + +Andreas Oberritter for providing a recent PCI initialization template (pluto2.c). + +comments, critics and ideas to linux-dvb@linuxtv.org or patrick.boettcher@desy.de diff --git a/drivers/media/dvb/Kconfig b/drivers/media/dvb/Kconfig index 883ec08490f..4983e1b1bb1 100644 --- a/drivers/media/dvb/Kconfig +++ b/drivers/media/dvb/Kconfig @@ -33,7 +33,7 @@ source "drivers/media/dvb/dibusb/Kconfig" source "drivers/media/dvb/cinergyT2/Kconfig" comment "Supported FlexCopII (B2C2) Adapters" - depends on DVB_CORE && PCI + depends on DVB_CORE && (PCI || USB) source "drivers/media/dvb/b2c2/Kconfig" comment "Supported BT878 Adapters" diff --git a/drivers/media/dvb/b2c2/Kconfig b/drivers/media/dvb/b2c2/Kconfig index f1f6187b7c1..99bd675df95 100644 --- a/drivers/media/dvb/b2c2/Kconfig +++ b/drivers/media/dvb/b2c2/Kconfig @@ -1,3 +1,40 @@ +config DVB_B2C2_FLEXCOP + tristate "Technisat/B2C2 FlexCopII(b) and FlexCopIII adapters" + depends on DVB_CORE + select DVB_STV0299 + select DVB_MT352 + select DVB_MT312 + select DVB_NXT2002 + select DVB_STV0297 + help + Support for the digital TV receiver chip made by B2C2 Inc. included in + Technisats PCI cards and USB boxes. + + Say Y if you own such a device and want to use it. + +config DVB_B2C2_FLEXCOP_PCI + tristate "Technisat/B2C2 Air/Sky/Cable2PC PCI" + depends on DVB_B2C2_FLEXCOP && PCI + help + Support for the Air/Sky/CableStar2 PCI card (DVB/ATSC) by Technisat/B2C2. + + Say Y if you own such a device and want to use it. + +config DVB_B2C2_FLEXCOP_USB + tristate "Technisat/B2C2 Air/Sky/Cable2PC USB" + depends on DVB_B2C2_FLEXCOP && USB + help + Support for the Air/Sky/Cable2PC USB1.1 box (DVB/ATSC) by Technisat/B2C2, + + Say Y if you own such a device and want to use it. + +config DVB_B2C2_FLEXCOP_DEBUG + bool "Enable debug for the B2C2 FlexCop drivers" + depends on DVB_B2C2_FLEXCOP + help + Say Y if you want to enable the module option to control debug messages + of all B2C2 FlexCop drivers. + config DVB_B2C2_SKYSTAR tristate "B2C2/Technisat Air/Sky/CableStar 2 PCI" depends on DVB_CORE && PCI diff --git a/drivers/media/dvb/b2c2/Makefile b/drivers/media/dvb/b2c2/Makefile index f9cdc6f052d..7703812af34 100644 --- a/drivers/media/dvb/b2c2/Makefile +++ b/drivers/media/dvb/b2c2/Makefile @@ -1,3 +1,14 @@ +b2c2-flexcop-objs = flexcop.o flexcop-fe-tuner.o flexcop-i2c.o \ + flexcop-sram.o flexcop-eeprom.o flexcop-misc.o flexcop-hw-filter.o \ + flexcop-dma.o +obj-$(CONFIG_DVB_B2C2_FLEXCOP) += b2c2-flexcop.o + +b2c2-flexcop-pci-objs = flexcop-pci.o +obj-$(CONFIG_DVB_B2C2_FLEXCOP_PCI) += b2c2-flexcop-pci.o + +b2c2-flexcop-usb-objs = flexcop-usb.o +obj-$(CONFIG_DVB_B2C2_FLEXCOP_USB) += b2c2-flexcop-usb.o + obj-$(CONFIG_DVB_B2C2_SKYSTAR) += skystar2.o EXTRA_CFLAGS = -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/ diff --git a/drivers/media/dvb/b2c2/flexcop-common.h b/drivers/media/dvb/b2c2/flexcop-common.h new file mode 100644 index 00000000000..82b7f8fa7b9 --- /dev/null +++ b/drivers/media/dvb/b2c2/flexcop-common.h @@ -0,0 +1,161 @@ +/* + * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III + * + * flexcop-common.h - common header file for device-specific source files also. + * + * see flexcop.c for copyright information. + */ +#ifndef __FLEXCOP_COMMON_H__ +#define __FLEXCOP_COMMON_H__ + +#include <linux/config.h> +#include <linux/pci.h> + +#include "flexcop-reg.h" + +#include "dmxdev.h" +#include "dvb_demux.h" +#include "dvb_filter.h" +#include "dvb_net.h" +#include "dvb_frontend.h" + +#define FC_MAX_FEED 256 + +#ifndef FC_LOG_PREFIX +#warning please define a log prefix for your file, using a default one +#define FC_LOG_PREFIX "b2c2-undef" +#endif + +/* Steal from usb.h */ +#undef err +#define err(format, arg...) printk(KERN_ERR FC_LOG_PREFIX ": " format "\n" , ## arg) +#undef info +#define info(format, arg...) printk(KERN_INFO FC_LOG_PREFIX ": " format "\n" , ## arg) +#undef warn +#define warn(format, arg...) printk(KERN_WARNING FC_LOG_PREFIX ": " format "\n" , ## arg) + +struct flexcop_dma { + struct pci_dev *pdev; + + u8 *cpu_addr0; + dma_addr_t dma_addr0; + u8 *cpu_addr1; + dma_addr_t dma_addr1; + u32 size; /* size of each address in bytes */ +}; + +/* Control structure for data definitions that are common to + * the B2C2-based PCI and USB devices. + */ +struct flexcop_device { + /* general */ + struct device *dev; /* for firmware_class */ + +#define FC_STATE_DVB_INIT 0x01 +#define FC_STATE_I2C_INIT 0x02 +#define FC_STATE_FE_INIT 0x04 + int init_state; + + /* device information */ + u8 mac_address[6]; + int has_32_hw_pid_filter; + flexcop_revision_t rev; + flexcop_device_type_t dev_type; + flexcop_bus_t bus_type; + + /* dvb stuff */ + struct dvb_adapter dvb_adapter; + struct dvb_frontend *fe; + struct dvb_net dvbnet; + struct dvb_demux demux; + struct dmxdev dmxdev; + struct dmx_frontend hw_frontend; + struct dmx_frontend mem_frontend; + int (*fe_sleep) (struct dvb_frontend *); + + struct i2c_adapter i2c_adap; + struct semaphore i2c_sem; + + /* options and status */ + int feedcount; + int pid_filtering; + + /* bus specific callbacks */ + flexcop_ibi_value (*read_ibi_reg) (struct flexcop_device *, flexcop_ibi_register); + int (*write_ibi_reg) (struct flexcop_device *, flexcop_ibi_register, flexcop_ibi_value); + + + int (*i2c_request) (struct flexcop_device*, flexcop_access_op_t, flexcop_i2c_port_t, u8 chipaddr, u8 addr, u8 *buf, u16 len); + int (*stream_control) (struct flexcop_device*, int); + + int (*get_mac_addr) (struct flexcop_device *fc, int extended); + + void *bus_specific; +}; + +/* exported prototypes */ + +/* from flexcop.c */ +void flexcop_pass_dmx_data(struct flexcop_device *fc, u8 *buf, u32 len); +void flexcop_pass_dmx_packets(struct flexcop_device *fc, u8 *buf, u32 no); + +struct flexcop_device *flexcop_device_kmalloc(size_t bus_specific_len); +void flexcop_device_kfree(struct flexcop_device*); + +int flexcop_device_initialize(struct flexcop_device*); +void flexcop_device_exit(struct flexcop_device *fc); + +/* from flexcop-dma.c */ +int flexcop_dma_allocate(struct pci_dev *pdev, struct flexcop_dma *dma, u32 size); +void flexcop_dma_free(struct flexcop_dma *dma); + +int flexcop_dma_control_timer_irq(struct flexcop_device *fc, flexcop_dma_index_t no, int onoff); +int flexcop_dma_control_size_irq(struct flexcop_device *fc, flexcop_dma_index_t no, int onoff); +int flexcop_dma_control_packet_irq(struct flexcop_device *fc, flexcop_dma_index_t no, int onoff); +int flexcop_dma_config(struct flexcop_device *fc, struct flexcop_dma *dma, flexcop_dma_index_t dma_idx,flexcop_dma_addr_index_t index); +int flexcop_dma_config_timer(struct flexcop_device *fc, flexcop_dma_index_t dma_idx, u8 cycles); +int flexcop_dma_config_packet_count(struct flexcop_device *fc, flexcop_dma_index_t dma_idx, u8 packets); + +/* from flexcop-eeprom.c */ +/* the PCI part uses this call to get the MAC address, the USB part has its own */ +int flexcop_eeprom_check_mac_addr(struct flexcop_device *fc, int extended); + +/* from flexcop-i2c.c */ +/* the PCI part uses this a i2c_request callback, whereas the usb part has its own + * one. We have it in flexcop-i2c.c, because it is going via the actual + * I2C-channel of the flexcop. + */ +int flexcop_i2c_request(struct flexcop_device*, flexcop_access_op_t, + flexcop_i2c_port_t, u8 chipaddr, u8 addr, u8 *buf, u16 len); + +/* from flexcop-sram.c */ +int flexcop_sram_set_dest(struct flexcop_device *fc, flexcop_sram_dest_t dest, flexcop_sram_dest_target_t target); +void flexcop_wan_set_speed(struct flexcop_device *fc, flexcop_wan_speed_t s); +void flexcop_sram_ctrl(struct flexcop_device *fc, int usb_wan, int sramdma, int maximumfill); + +/* global prototypes for the flexcop-chip */ +/* from flexcop-fe-tuner.c */ +int flexcop_frontend_init(struct flexcop_device *card); +void flexcop_frontend_exit(struct flexcop_device *fc); + +/* from flexcop-i2c.c */ +int flexcop_i2c_init(struct flexcop_device *fc); +void flexcop_i2c_exit(struct flexcop_device *fc); + +/* from flexcop-sram.c */ +int flexcop_sram_init(struct flexcop_device *fc); + +/* from flexcop-misc.c */ +void flexcop_determine_revision(struct flexcop_device *fc); +void flexcop_device_name(struct flexcop_device *fc,const char *prefix,const char *suffix); + +/* from flexcop-hw-filter.c */ +int flexcop_pid_feed_control(struct flexcop_device *fc, struct dvb_demux_feed *dvbdmxfeed, int onoff); +void flexcop_hw_filter_init(struct flexcop_device *fc); + +void flexcop_smc_ctrl(struct flexcop_device *fc, int onoff); + +void flexcop_set_mac_filter(struct flexcop_device *fc, u8 mac[6]); +void flexcop_mac_filter_ctrl(struct flexcop_device *fc, int onoff); + +#endif diff --git a/drivers/media/dvb/b2c2/flexcop-dma.c b/drivers/media/dvb/b2c2/flexcop-dma.c new file mode 100644 index 00000000000..8d270607536 --- /dev/null +++ b/drivers/media/dvb/b2c2/flexcop-dma.c @@ -0,0 +1,149 @@ +/* + * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III + * + * flexcop-dma.c - methods for configuring and controlling the DMA of the FlexCop. + * + * see flexcop.c for copyright information. + */ +#include "flexcop.h" + +int flexcop_dma_allocate(struct pci_dev *pdev, struct flexcop_dma *dma, u32 size) +{ + u8 *tcpu; + dma_addr_t tdma; + + if (size % 2) { + err("dma buffersize has to be even."); + return -EINVAL; + } + + if ((tcpu = pci_alloc_consistent(pdev, size, &tdma)) != NULL) { + dma->pdev = pdev; + dma->cpu_addr0 = tcpu; + dma->dma_addr0 = tdma; + dma->cpu_addr1 = tcpu + size/2; + dma->dma_addr1 = tdma + size/2; + dma->size = size/2; + return 0; + } + return -ENOMEM; +} +EXPORT_SYMBOL(flexcop_dma_allocate); + +void flexcop_dma_free(struct flexcop_dma *dma) +{ + pci_free_consistent(dma->pdev, dma->size*2,dma->cpu_addr0, dma->dma_addr0); + memset(dma,0,sizeof(struct flexcop_dma)); +} +EXPORT_SYMBOL(flexcop_dma_free); + +int flexcop_dma_control_timer_irq(struct flexcop_device *fc, flexcop_dma_index_t no, int onoff) +{ + flexcop_ibi_value v = fc->read_ibi_reg(fc,ctrl_208); + + if (no & FC_DMA_1) + v.ctrl_208.DMA1_Timer_Enable_sig = onoff; + + if (no & FC_DMA_2) + v.ctrl_208.DMA2_Timer_Enable_sig = onoff; + + fc->write_ibi_reg(fc,ctrl_208,v); + return 0; +} +EXPORT_SYMBOL(flexcop_dma_control_timer_irq); + +int flexcop_dma_control_size_irq(struct flexcop_device *fc, flexcop_dma_index_t no, int onoff) +{ + flexcop_ibi_value v = fc->read_ibi_reg(fc,ctrl_208); + + if (no & FC_DMA_1) + v.ctrl_208.DMA1_IRQ_Enable_sig = onoff; + + if (no & FC_DMA_2) + v.ctrl_208.DMA2_IRQ_Enable_sig = onoff; + + fc->write_ibi_reg(fc,ctrl_208,v); + return 0; +} +EXPORT_SYMBOL(flexcop_dma_control_size_irq); + +int flexcop_dma_control_packet_irq(struct flexcop_device *fc, flexcop_dma_index_t no, int onoff) +{ + flexcop_ibi_value v = fc->read_ibi_reg(fc,ctrl_208); + + if (no & FC_DMA_1) + v.ctrl_208.DMA1_Size_IRQ_Enable_sig = onoff; + + if (no & FC_DMA_2) + v.ctrl_208.DMA2_Size_IRQ_Enable_sig = onoff; + + fc->write_ibi_reg(fc,ctrl_208,v); + return 0; +} +EXPORT_SYMBOL(flexcop_dma_control_packet_irq); + +int flexcop_dma_config(struct flexcop_device *fc, struct flexcop_dma *dma, flexcop_dma_index_t dma_idx,flexcop_dma_addr_index_t index) +{ + + flexcop_ibi_value v0x0,v0x4,v0xc; + v0x0.raw = v0x4.raw = v0xc.raw = 0; + + v0x0.dma_0x0.dma_address0 = dma->dma_addr0 >> 2; + v0xc.dma_0xc.dma_address1 = dma->dma_addr1 >> 2; + v0x4.dma_0x4_write.dma_addr_size = dma->size / 4; + + if (index & FC_DMA_SUBADDR_0) + v0x0.dma_0x0.dma_0start = 1; + + if (index & FC_DMA_SUBADDR_1) + v0xc.dma_0xc.dma_1start = 1; + + if (dma_idx & FC_DMA_1) { + fc->write_ibi_reg(fc,dma1_000,v0x0); + fc->write_ibi_reg(fc,dma1_004,v0x4); + fc->write_ibi_reg(fc,dma1_00c,v0xc); + } else { /* (dma_idx & FC_DMA_2) */ + fc->write_ibi_reg(fc,dma2_010,v0x0); + fc->write_ibi_reg(fc,dma2_014,v0x4); + fc->write_ibi_reg(fc,dma2_01c,v0xc); + } + + return 0; +} +EXPORT_SYMBOL(flexcop_dma_config); + +static int flexcop_dma_remap(struct flexcop_device *fc, flexcop_dma_index_t dma_idx, int onoff) +{ + flexcop_ibi_register r = (dma_idx & FC_DMA_1) ? dma1_00c : dma2_01c; + flexcop_ibi_value v = fc->read_ibi_reg(fc,r); + v.dma_0xc.remap_enable = onoff; + fc->write_ibi_reg(fc,r,v); + return 0; +} + +/* 1 cycles = 1.97 msec */ +int flexcop_dma_config_timer(struct flexcop_device *fc, flexcop_dma_index_t dma_idx, u8 cycles) +{ + flexcop_ibi_register r = (dma_idx & FC_DMA_1) ? dma1_004 : dma2_014; + flexcop_ibi_value v = fc->read_ibi_reg(fc,r); + + flexcop_dma_remap(fc,dma_idx,0); + + v.dma_0x4_write.dmatimer = cycles >> 1; + fc->write_ibi_reg(fc,r,v); + return 0; +} +EXPORT_SYMBOL(flexcop_dma_config_timer); + +int flexcop_dma_config_packet_count(struct flexcop_device *fc, flexcop_dma_index_t dma_idx, u8 packets) +{ + flexcop_ibi_register r = (dma_idx & FC_DMA_1) ? dma1_004 : dma2_014; + flexcop_ibi_value v = fc->read_ibi_reg(fc,r); + + flexcop_dma_remap(fc,dma_idx,1); + + v.dma_0x4_remap.DMA_maxpackets = packets; + fc->write_ibi_reg(fc,r,v); + return 0; +} +EXPORT_SYMBOL(flexcop_dma_config_packet_count); diff --git a/drivers/media/dvb/b2c2/flexcop-eeprom.c b/drivers/media/dvb/b2c2/flexcop-eeprom.c new file mode 100644 index 00000000000..4dbedd81973 --- /dev/null +++ b/drivers/media/dvb/b2c2/flexcop-eeprom.c @@ -0,0 +1,157 @@ +/* + * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III + * + * flexcop-eeprom.c - eeprom access methods (currently only MAC address reading is used) + * + * see flexcop.c for copyright information. + */ +#include "flexcop.h" + +#if 0 +/*EEPROM (Skystar2 has one "24LC08B" chip on board) */ +static int eeprom_write(struct adapter *adapter, u16 addr, u8 *buf, u16 len) +{ + return flex_i2c_write(adapter, 0x20000000, 0x50, addr, buf, len); +} + +static int eeprom_lrc_write(struct adapter *adapter, u32 addr, u32 len, u8 *wbuf, u8 *rbuf, int retries) +{ + int i; + + for (i = 0; i < retries; i++) { + if (eeprom_write(adapter, addr, wbuf, len) == len) { + if (eeprom_lrc_read(adapter, addr, len, rbuf, retries) == 1) + return 1; + } + } + + return 0; +} + +/* These functions could be used to unlock SkyStar2 cards. */ + +static int eeprom_writeKey(struct adapter *adapter, u8 *key, u32 len) +{ + u8 rbuf[20]; + u8 wbuf[20]; + + if (len != 16) + return 0; + + memcpy(wbuf, key, len); + + wbuf[16] = 0; + wbuf[17] = 0; + wbuf[18] = 0; + wbuf[19] = calc_lrc(wbuf, 19); + + return eeprom_lrc_write(adapter, 0x3e4, 20, wbuf, rbuf, 4); +} + +static int eeprom_readKey(struct adapter *adapter, u8 *key, u32 len) +{ + u8 buf[20]; + + if (len != 16) + return 0; + + if (eeprom_lrc_read(adapter, 0x3e4, 20, buf, 4) == 0) + return 0; + + memcpy(key, buf, len); + + return 1; +} + +static char eeprom_set_mac_addr(struct adapter *adapter, char type, u8 *mac) +{ + u8 tmp[8]; + + if (type != 0) { + tmp[0] = mac[0]; + tmp[1] = mac[1]; + tmp[2] = mac[2]; + tmp[3] = mac[5]; + tmp[4] = mac[6]; + tmp[5] = mac[7]; + + } else { + + tmp[0] = mac[0]; + tmp[1] = mac[1]; + tmp[2] = mac[2]; + tmp[3] = mac[3]; + tmp[4] = mac[4]; + tmp[5] = mac[5]; + } + + tmp[6] = 0; + tmp[7] = calc_lrc(tmp, 7); + + if (eeprom_write(adapter, 0x3f8, tmp, 8) == 8) + return 1; + + return 0; +} + +static int flexcop_eeprom_read(struct flexcop_device *fc, u16 addr, u8 *buf, u16 len) +{ + return fc->i2c_request(fc,FC_READ,FC_I2C_PORT_EEPROM,0x50,addr,buf,len); +} + +#endif + +static u8 calc_lrc(u8 *buf, int len) +{ + int i; + u8 sum = 0; + for (i = 0; i < len; i++) + sum = sum ^ buf[i]; + return sum; +} + +static int flexcop_eeprom_request(struct flexcop_device *fc, flexcop_access_op_t op, u16 addr, u8 *buf, u16 len, int retries) +{ + int i,ret = 0; + u8 chipaddr = 0x50 | ((addr >> 8) & 3); + for (i = 0; i < retries; i++) + if ((ret = fc->i2c_request(fc,op,FC_I2C_PORT_EEPROM,chipaddr,addr & 0xff,buf,len)) == 0) + break; + return ret; +} + +static int flexcop_eeprom_lrc_read(struct flexcop_device *fc, u16 addr, u8 *buf, u16 len, int retries) +{ + int ret = flexcop_eeprom_request(fc,FC_READ,addr,buf,len,retries); + if (ret == 0) + if (calc_lrc(buf, len - 1) != buf[len - 1]) + ret = -EINVAL; + return ret; +} + +/* TODO how is it handled in USB */ + +/* JJ's comment about extended == 1: it is not presently used anywhere but was + * added to the low-level functions for possible support of EUI64 + */ +int flexcop_eeprom_check_mac_addr(struct flexcop_device *fc, int extended) +{ + u8 buf[8]; + int ret = 0; + + memset(fc->mac_address,0,6); + + if ((ret = flexcop_eeprom_lrc_read(fc,0x3f8,buf,8,4)) == 0) { + if (extended != 0) { + err("TODO: extended (EUI64) MAC addresses aren't completely supported yet"); + ret = -EINVAL; +/* memcpy(fc->mac_address,buf,3); + mac[3] = 0xfe; + mac[4] = 0xff; + memcpy(&fc->mac_address[3],&buf[5],3); */ + } else + memcpy(fc->mac_address,buf,6); + } + return ret; +} +EXPORT_SYMBOL(flexcop_eeprom_check_mac_addr); diff --git a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c new file mode 100644 index 00000000000..b3dd16fb5bb --- /dev/null +++ b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c @@ -0,0 +1,403 @@ +/* + * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III + * + * flexcop-fe-tuner.c - methods for attaching a frontend and controlling DiSEqC. + * + * see flexcop.c for copyright information. + */ +#include "flexcop.h" + +#include "stv0299.h" +#include "mt352.h" +#include "nxt2002.h" +#include "stv0297.h" +#include "mt312.h" + +/* lnb control */ + +static int flexcop_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) +{ + struct flexcop_device *fc = fe->dvb->priv; + flexcop_ibi_value v; + deb_tuner("polarity/voltage = %u\n", voltage); + + v = fc->read_ibi_reg(fc, misc_204); + switch (voltage) { + case SEC_VOLTAGE_OFF: + v.misc_204.ACPI1_sig = 1; + break; + case SEC_VOLTAGE_13: + v.misc_204.ACPI1_sig = 0; + v.misc_204.LNB_L_H_sig = 0; + break; + case SEC_VOLTAGE_18: + v.misc_204.ACPI1_sig = 0; + v.misc_204.LNB_L_H_sig = 1; + break; + default: + err("unknown SEC_VOLTAGE value"); + return -EINVAL; + } + return fc->write_ibi_reg(fc, misc_204, v); +} + +static int flexcop_sleep(struct dvb_frontend* fe) +{ + struct flexcop_device *fc = fe->dvb->priv; +/* flexcop_ibi_value v = fc->read_ibi_reg(fc,misc_204); */ + + if (fc->fe_sleep) + return fc->fe_sleep(fe); + +/* v.misc_204.ACPI3_sig = 1; + fc->write_ibi_reg(fc,misc_204,v);*/ + + return 0; +} + +static int flexcop_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone) +{ + /* u16 wz_half_period_for_45_mhz[] = { 0x01ff, 0x0154, 0x00ff, 0x00cc }; */ + struct flexcop_device *fc = fe->dvb->priv; + flexcop_ibi_value v; + u16 ax; + v.raw = 0; + + deb_tuner("tone = %u\n",tone); + + switch (tone) { + case SEC_TONE_ON: + ax = 0x01ff; + break; + case SEC_TONE_OFF: + ax = 0; + break; + default: + err("unknown SEC_TONE value"); + return -EINVAL; + } + + v.lnb_switch_freq_200.LNB_CTLPrescaler_sig = 1; /* divide by 2 */ + + v.lnb_switch_freq_200.LNB_CTLHighCount_sig = + v.lnb_switch_freq_200.LNB_CTLLowCount_sig = ax; + + return fc->write_ibi_reg(fc,lnb_switch_freq_200,v); +} + +static void flexcop_diseqc_send_bit(struct dvb_frontend* fe, int data) +{ + flexcop_set_tone(fe, SEC_TONE_ON); + udelay(data ? 500 : 1000); + flexcop_set_tone(fe, SEC_TONE_OFF); + udelay(data ? 1000 : 500); +} + +static void flexcop_diseqc_send_byte(struct dvb_frontend* fe, int data) +{ + int i, par = 1, d; + + for (i = 7; i >= 0; i--) { + d = (data >> i) & 1; + par ^= d; + flexcop_diseqc_send_bit(fe, d); + } + + flexcop_diseqc_send_bit(fe, par); +} + +static int flexcop_send_diseqc_msg(struct dvb_frontend* fe, int len, u8 *msg, unsigned long burst) +{ + int i; + + flexcop_set_tone(fe, SEC_TONE_OFF); + mdelay(16); + + for (i = 0; i < len; i++) + flexcop_diseqc_send_byte(fe,msg[i]); + + mdelay(16); + + if (burst != -1) { + if (burst) + flexcop_diseqc_send_byte(fe, 0xff); + else { + flexcop_set_tone(fe, SEC_TONE_ON); + udelay(12500); + flexcop_set_tone(fe, SEC_TONE_OFF); + } + msleep(20); + } + return 0; +} + +static int flexcop_diseqc_send_master_cmd(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd) +{ + return flexcop_send_diseqc_msg(fe, cmd->msg_len, cmd->msg, 0); +} + +static int flexcop_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t minicmd) +{ + return flexcop_send_diseqc_msg(fe, 0, NULL, minicmd); +} + +/* dvb-s stv0299 */ +static int samsung_tbmu24112_set_symbol_rate(struct dvb_frontend* fe, u32 srate, u32 ratio) +{ + u8 aclk = 0; + u8 bclk = 0; + + if (srate < 1500000) { aclk = 0xb7; bclk = 0x47; } + else if (srate < 3000000) { aclk = 0xb7; bclk = 0x4b; } + else if (srate < 7000000) { aclk = 0xb7; bclk = 0x4f; } + else if (srate < 14000000) { aclk = 0xb7; bclk = 0x53; } + else if (srate < 30000000) { aclk = 0xb6; bclk = 0x53; } + else if (srate < 45000000) { aclk = 0xb4; bclk = 0x51; } + + stv0299_writereg (fe, 0x13, aclk); + stv0299_writereg (fe, 0x14, bclk); + stv0299_writereg (fe, 0x1f, (ratio >> 16) & 0xff); + stv0299_writereg (fe, 0x20, (ratio >> 8) & 0xff); + stv0299_writereg (fe, 0x21, (ratio ) & 0xf0); + + return 0; +} + +static int samsung_tbmu24112_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params) +{ + u8 buf[4]; + u32 div; + struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) }; + struct flexcop_device *fc = fe->dvb->priv; + + div = params->frequency / 125; + + buf[0] = (div >> 8) & 0x7f; + buf[1] = div & 0xff; + buf[2] = 0x84; /* 0xC4 */ + buf[3] = 0x08; + + if (params->frequency < 1500000) buf[3] |= 0x10; + + if (i2c_transfer(&fc->i2c_adap, &msg, 1) != 1) + return -EIO; + return 0; +} + +static u8 samsung_tbmu24112_inittab[] = { + 0x01, 0x15, + 0x02, 0x30, + 0x03, 0x00, + 0x04, 0x7D, + 0x05, 0x35, + 0x06, 0x02, + 0x07, 0x00, + 0x08, 0xC3, + 0x0C, 0x00, + 0x0D, 0x81, + 0x0E, 0x23, + 0x0F, 0x12, + 0x10, 0x7E, + 0x11, 0x84, + 0x12, 0xB9, + 0x13, 0x88, + 0x14, 0x89, + 0x15, 0xC9, + 0x16, 0x00, + 0x17, 0x5C, + 0x18, 0x00, + 0x19, 0x00, + 0x1A, 0x00, + 0x1C, 0x00, + 0x1D, 0x00, + 0x1E, 0x00, + 0x1F, 0x3A, + 0x20, 0x2E, + 0x21, 0x80, + 0x22, 0xFF, + 0x23, 0xC1, + 0x28, 0x00, + 0x29, 0x1E, + 0x2A, 0x14, + 0x2B, 0x0F, + 0x2C, 0x09, + 0x2D, 0x05, + 0x31, 0x1F, + 0x32, 0x19, + 0x33, 0xFE, + 0x34, 0x93, + 0xff, 0xff, +}; + +static struct stv0299_config samsung_tbmu24112_config = { + .demod_address = 0x68, + .inittab = samsung_tbmu24112_inittab, + .mclk = 88000000UL, + .invert = 0, + .enhanced_tuning = 0, + .skip_reinit = 0, + .lock_output = STV0229_LOCKOUTPUT_LK, + .volt13_op0_op1 = STV0299_VOLT13_OP1, + .min_delay_ms = 100, + .set_symbol_rate = samsung_tbmu24112_set_symbol_rate, + .pll_set = samsung_tbmu24112_pll_set, +}; + +/* dvb-t mt352 */ +static int samsung_tdtc9251dh0_demod_init(struct dvb_frontend* fe) +{ + static u8 mt352_clock_config [] = { 0x89, 0x18, 0x2d }; + static u8 mt352_reset [] = { 0x50, 0x80 }; + static u8 mt352_adc_ctl_1_cfg [] = { 0x8E, 0x40 }; + static u8 mt352_agc_cfg [] = { 0x67, 0x28, 0xa1 }; + static u8 mt352_capt_range_cfg[] = { 0x75, 0x32 }; + + mt352_write(fe, mt352_clock_config, sizeof(mt352_clock_config)); + udelay(2000); + mt352_write(fe, mt352_reset, sizeof(mt352_reset)); + mt352_write(fe, mt352_adc_ctl_1_cfg, sizeof(mt352_adc_ctl_1_cfg)); + + mt352_write(fe, mt352_agc_cfg, sizeof(mt352_agc_cfg)); + mt352_write(fe, mt352_capt_range_cfg, sizeof(mt352_capt_range_cfg)); + + return 0; +} + +static int samsung_tdtc9251dh0_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params, u8* pllbuf) +{ + u32 div; + unsigned char bs = 0; + + #define IF_FREQUENCYx6 217 /* 6 * 36.16666666667MHz */ + div = (((params->frequency + 83333) * 3) / 500000) + IF_FREQUENCYx6; + + if (params->frequency >= 48000000 && params->frequency <= 154000000) bs = 0x09; + if (params->frequency >= 161000000 && params->frequency <= 439000000) bs = 0x0a; + if (params->frequency >= 447000000 && params->frequency <= 863000000) bs = 0x08; + + pllbuf[0] = 0xc2; /* Note: non-linux standard PLL i2c address */ + pllbuf[1] = div >> 8; + pllbuf[2] = div & 0xff; + pllbuf[3] = 0xcc; + pllbuf[4] = bs; + + return 0; +} + +static struct mt352_config samsung_tdtc9251dh0_config = { + + .demod_address = 0x0f, + .demod_init = samsung_tdtc9251dh0_demod_init, + .pll_set = samsung_tdtc9251dh0_pll_set, +}; + +static int nxt2002_request_firmware(struct dvb_frontend* fe, const struct firmware **fw, char* name) +{ + struct flexcop_device *fc = fe->dvb->priv; + return request_firmware(fw, name, fc->dev); +} + +static struct nxt2002_config samsung_tbmv_config = { + .demod_address = 0x0a, + .request_firmware = nxt2002_request_firmware, +}; + +static int skystar23_samsung_tbdu18132_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params) +{ + u8 buf[4]; + u32 div; + struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) }; + struct flexcop_device *fc = fe->dvb->priv; + + div = (params->frequency + (125/2)) / 125; + + buf[0] = (div >> 8) & 0x7f; + buf[1] = (div >> 0) & 0xff; + buf[2] = 0x84 | ((div >> 10) & 0x60); + buf[3] = 0x80; + + if (params->frequency < 1550000) + buf[3] |= 0x02; + + if (i2c_transfer(&fc->i2c_adap, &msg, 1) != 1) + return -EIO; + return 0; +} + +static struct mt312_config skystar23_samsung_tbdu18132_config = { + + .demod_address = 0x0e, + .pll_set = skystar23_samsung_tbdu18132_pll_set, +}; + +static struct stv0297_config alps_tdee4_stv0297_config = { + .demod_address = 0x1c, +// .invert = 1, +// .pll_set = alps_tdee4_stv0297_pll_set, +}; + +/* try to figure out the frontend, each card/box can have on of the following list */ +int flexcop_frontend_init(struct flexcop_device *fc) +{ + /* try the sky v2.6 (stv0299/Samsung tbmu24112(sl1935)) */ + if ((fc->fe = stv0299_attach(&samsung_tbmu24112_config, &fc->i2c_adap)) != NULL) { + fc->fe->ops->set_voltage = flexcop_set_voltage; + + fc->fe_sleep = fc->fe->ops->sleep; + fc->fe->ops->sleep = flexcop_sleep; + + fc->dev_type = FC_SKY; + info("found the stv0299 at i2c address: 0x%02x",samsung_tbmu24112_config.demod_address); + } else + /* try the air dvb-t (mt352/Samsung tdtc9251dh0(??)) */ + if ((fc->fe = mt352_attach(&samsung_tdtc9251dh0_config, &fc->i2c_adap)) != NULL ) { + fc->dev_type = FC_AIR_DVB; + info("found the mt352 at i2c address: 0x%02x",samsung_tdtc9251dh0_config.demod_address); + } else + /* try the air atsc (nxt2002) */ + if ((fc->fe = nxt2002_attach(&samsung_tbmv_config, &fc->i2c_adap)) != NULL) { + fc->dev_type = FC_AIR_ATSC; + info("found the nxt2002 at i2c address: 0x%02x",samsung_tbmv_config.demod_address); + } else + /* try the cable dvb (stv0297) */ + if ((fc->fe = stv0297_attach(&alps_tdee4_stv0297_config, &fc->i2c_adap, 0xf8)) != NULL) { + fc->dev_type = FC_CABLE; + info("found the stv0297 at i2c address: 0x%02x",alps_tdee4_stv0297_config.demod_address); + } else + /* try the sky v2.3 (vp310/Samsung tbdu18132(tsa5059)) */ + if ((fc->fe = vp310_attach(&skystar23_samsung_tbdu18132_config, &fc->i2c_adap)) != NULL) { + fc->fe->ops->diseqc_send_master_cmd = flexcop_diseqc_send_master_cmd; + fc->fe->ops->diseqc_send_burst = flexcop_diseqc_send_burst; + fc->fe->ops->set_tone = flexcop_set_tone; + fc->fe->ops->set_voltage = flexcop_set_voltage; + + fc->fe_sleep = fc->fe->ops->sleep; + fc->fe->ops->sleep = flexcop_sleep; + + fc->dev_type = FC_SKY_OLD; + info("found the vp310 (aka mt312) at i2c address: 0x%02x",skystar23_samsung_tbdu18132_config.demod_address); + } + + if (fc->fe == NULL) { + err("no frontend driver found for this B2C2/FlexCop adapter"); + return -ENODEV; + } else { + if (dvb_register_frontend(&fc->dvb_adapter, fc->fe)) { + err("frontend registration failed!"); + if (fc->fe->ops->release != NULL) + fc->fe->ops->release(fc->fe); + fc->fe = NULL; + return -EINVAL; + } + } + fc->init_state |= FC_STATE_FE_INIT; + return 0; +} + +void flexcop_frontend_exit(struct flexcop_device *fc) +{ + if (fc->init_state & FC_STATE_FE_INIT) + dvb_unregister_frontend(fc->fe); + + fc->init_state &= ~FC_STATE_FE_INIT; +} diff --git a/drivers/media/dvb/b2c2/flexcop-hw-filter.c b/drivers/media/dvb/b2c2/flexcop-hw-filter.c new file mode 100644 index 00000000000..db983d704ff --- /dev/null +++ b/drivers/media/dvb/b2c2/flexcop-hw-filter.c @@ -0,0 +1,198 @@ +/* + * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III + * + * flexcop-hw-filter.c - pid and mac address filtering and corresponding control functions. + * + * see flexcop.c for copyright information. + */ +#include "flexcop.h" + +static void flexcop_rcv_data_ctrl(struct flexcop_device *fc, int onoff) +{ + flexcop_set_ibi_value(ctrl_208,Rcv_Data_sig,onoff); +} + +void flexcop_smc_ctrl(struct flexcop_device *fc, int onoff) +{ + flexcop_set_ibi_value(ctrl_208,SMC_Enable_sig,onoff); +} + +void flexcop_null_filter_ctrl(struct flexcop_device *fc, int onoff) +{ + flexcop_set_ibi_value(ctrl_208,Null_filter_sig,onoff); +} + +void flexcop_set_mac_filter(struct flexcop_device *fc, u8 mac[6]) +{ + flexcop_ibi_value v418,v41c; + v41c = fc->read_ibi_reg(fc,mac_address_41c); + + v418.mac_address_418.MAC1 = mac[0]; + v418.mac_address_418.MAC2 = mac[1]; + v418.mac_address_418.MAC3 = mac[2]; + v418.mac_address_418.MAC6 = mac[3]; + v41c.mac_address_41c.MAC7 = mac[4]; + v41c.mac_address_41c.MAC8 = mac[5]; + + fc->write_ibi_reg(fc,mac_address_418,v418); + fc->write_ibi_reg(fc,mac_address_41c,v41c); +} + +void flexcop_mac_filter_ctrl(struct flexcop_device *fc, int onoff) +{ + flexcop_set_ibi_value(ctrl_208,MAC_filter_Mode_sig,onoff); +} + +static void flexcop_pid_group_filter(struct flexcop_device *fc, u16 pid, u16 mask) +{ + /* index_reg_310.extra_index_reg need to 0 or 7 to work */ + flexcop_ibi_value v30c; + v30c.pid_filter_30c_ext_ind_0_7.Group_PID = pid; + v30c.pid_filter_30c_ext_ind_0_7.Group_mask = mask; + fc->write_ibi_reg(fc,pid_filter_30c,v30c); +} + +static void flexcop_pid_group_filter_ctrl(struct flexcop_device *fc, int onoff) +{ + flexcop_set_ibi_value(ctrl_208,Mask_filter_sig,onoff); +} + +/* this fancy define reduces the code size of the quite similar PID controlling of + * the first 6 PIDs + */ + +#define pid_ctrl(vregname,field,enablefield,trans_field,transval) \ + flexcop_ibi_value vpid = fc->read_ibi_reg(fc, vregname), \ + v208 = fc->read_ibi_reg(fc, ctrl_208); \ +\ + vpid.vregname.field = onoff ? pid : 0x1fff; \ + vpid.vregname.trans_field = transval; \ + v208.ctrl_208.enablefield = onoff; \ +\ + fc->write_ibi_reg(fc,vregname,vpid); \ + fc->write_ibi_reg(fc,ctrl_208,v208); + +static void flexcop_pid_Stream1_PID_ctrl(struct flexcop_device *fc, u16 pid, int onoff) +{ + pid_ctrl(pid_filter_300,Stream1_PID,Stream1_filter_sig,Stream1_trans,0); +} + +static void flexcop_pid_Stream2_PID_ctrl(struct flexcop_device *fc, u16 pid, int onoff) +{ + pid_ctrl(pid_filter_300,Stream2_PID,Stream2_filter_sig,Stream2_trans,0); +} + +static void flexcop_pid_PCR_PID_ctrl(struct flexcop_device *fc, u16 pid, int onoff) +{ + pid_ctrl(pid_filter_304,PCR_PID,PCR_filter_sig,PCR_trans,0); +} + +static void flexcop_pid_PMT_PID_ctrl(struct flexcop_device *fc, u16 pid, int onoff) +{ + pid_ctrl(pid_filter_304,PMT_PID,PMT_filter_sig,PMT_trans,0); +} + +static void flexcop_pid_EMM_PID_ctrl(struct flexcop_device *fc, u16 pid, int onoff) +{ + pid_ctrl(pid_filter_308,EMM_PID,EMM_filter_sig,EMM_trans,0); +} + +static void flexcop_pid_ECM_PID_ctrl(struct flexcop_device *fc, u16 pid, int onoff) +{ + pid_ctrl(pid_filter_308,ECM_PID,ECM_filter_sig,ECM_trans,0); +} + +static void flexcop_pid_control(struct flexcop_device *fc, int index, u16 pid,int onoff) +{ + deb_ts("setting pid: %5d %04x at index %d '%s'\n",pid,pid,index,onoff ? "on" : "off"); + + /* We could use bit magic here to reduce source code size. + * I decided against it, but to use the real register names */ + switch (index) { + case 0: flexcop_pid_Stream1_PID_ctrl(fc,pid,onoff); break; + case 1: flexcop_pid_Stream2_PID_ctrl(fc,pid,onoff); break; + case 2: flexcop_pid_PCR_PID_ctrl(fc,pid,onoff); break; + case 3: flexcop_pid_PMT_PID_ctrl(fc,pid,onoff); break; + case 4: flexcop_pid_EMM_PID_ctrl(fc,pid,onoff); break; + case 5: flexcop_pid_ECM_PID_ctrl(fc,pid,onoff); break; + default: + if (fc->has_32_hw_pid_filter && index < 38) { + flexcop_ibi_value vpid,vid; + + /* set the index */ + vid = fc->read_ibi_reg(fc,index_reg_310); + vid.index_reg_310.index_reg = index - 6; + fc->write_ibi_reg(fc,index_reg_310, vid); + + vpid = fc->read_ibi_reg(fc,pid_n_reg_314); + vpid.pid_n_reg_314.PID = onoff ? pid : 0x1fff; + vpid.pid_n_reg_314.PID_enable_bit = onoff; + fc->write_ibi_reg(fc,pid_n_reg_314, vpid); + } + break; + } +} + +int flexcop_pid_feed_control(struct flexcop_device *fc, struct dvb_demux_feed *dvbdmxfeed, int onoff) +{ + int max_pid_filter = 6 + fc->has_32_hw_pid_filter*32; + + fc->feedcount += (onoff ? 1 : -1); + + /* when doing hw pid filtering, set the pid */ + if (fc->pid_filtering) + flexcop_pid_control(fc,dvbdmxfeed->index,dvbdmxfeed->pid,onoff); + + /* if it was the first feed request */ + if (fc->feedcount == onoff && onoff) { + if (!fc->pid_filtering) { + deb_ts("enabling full TS transfer\n"); + flexcop_pid_group_filter(fc, 0,0); + flexcop_pid_group_filter_ctrl(fc,1); + } + + if (fc->stream_control) + fc->stream_control(fc,1); + flexcop_rcv_data_ctrl(fc,1); + + /* if there is no more feed left to feed */ + } else if (fc->feedcount == onoff && !onoff) { + if (!fc->pid_filtering) { + deb_ts("disabling full TS transfer\n"); + flexcop_pid_group_filter(fc, 0x1fe0,0); + flexcop_pid_group_filter_ctrl(fc,0); + } + + flexcop_rcv_data_ctrl(fc,0); + if (fc->stream_control) + fc->stream_control(fc,0); + } + + /* if pid_filtering is on and more pids than the hw-filter can provide are + * requested enable the whole bandwidth. + */ + if (fc->pid_filtering && fc->feedcount > max_pid_filter) { + flexcop_pid_group_filter(fc, 0,0); + flexcop_pid_group_filter_ctrl(fc,1); + } else if (fc->pid_filtering && fc->feedcount <= max_pid_filter) { + flexcop_pid_group_filter(fc, 0x1fe0,0); + flexcop_pid_group_filter_ctrl(fc,0); + } + + return 0; +} + +void flexcop_hw_filter_init(struct flexcop_device *fc) +{ + int i; + flexcop_ibi_value v; + for (i = 0; i < 6 + 32*fc->has_32_hw_pid_filter; i++) + flexcop_pid_control(fc,i,0x1fff,0); + + flexcop_pid_group_filter(fc, 0x1fe0,0); + + v = fc->read_ibi_reg(fc,pid_filter_308); + v.pid_filter_308.EMM_filter_4 = 1; + v.pid_filter_308.EMM_filter_6 = 0; + fc->write_ibi_reg(fc,pid_filter_308,v); +} diff --git a/drivers/media/dvb/b2c2/flexcop-i2c.c b/drivers/media/dvb/b2c2/flexcop-i2c.c new file mode 100644 index 00000000000..736251f393c --- /dev/null +++ b/drivers/media/dvb/b2c2/flexcop-i2c.c @@ -0,0 +1,204 @@ +/* + * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III + * + * flexcop-i2c.c - flexcop internal 2Wire bus (I2C) and dvb i2c initialization + * + * see flexcop.c for copyright information. + */ +#include "flexcop.h" + +#define FC_MAX_I2C_RETRIES 100000 + +static int flexcop_i2c_operation(struct flexcop_device *fc, flexcop_ibi_value *r100, int max_ack_errors) +{ + int i,ack_errors = 0; + flexcop_ibi_value r; + + r100->tw_sm_c_100.working_start = 1; + deb_i2c("r100 before: %08x\n",r100->raw); + + fc->write_ibi_reg(fc, tw_sm_c_100, ibi_zero); + fc->write_ibi_reg(fc, tw_sm_c_100, *r100); /* initiating i2c operation */ + + for (i = 0; i < FC_MAX_I2C_RETRIES; i++) { + r = fc->read_ibi_reg(fc, tw_sm_c_100); + + if (!r.tw_sm_c_100.no_base_addr_ack_error) { + if (r.tw_sm_c_100.st_done) { /* && !r.tw_sm_c_100.working_start */ + *r100 = r; + deb_i2c("i2c success\n"); + return 0; + } + } else { + deb_i2c("suffering from an i2c ack_error\n"); + if (++ack_errors >= max_ack_errors) + break; + + fc->write_ibi_reg(fc, tw_sm_c_100, ibi_zero); + fc->write_ibi_reg(fc, tw_sm_c_100, *r100); + } + } + deb_i2c("tried %d times i2c operation, never finished or too many ack errors.\n",i); + return -EREMOTEIO; +} + +static int flexcop_i2c_read4(struct flexcop_device *fc, flexcop_ibi_value r100, u8 *buf) +{ + flexcop_ibi_value r104; + int len = r100.tw_sm_c_100.total_bytes, /* remember total_bytes is buflen-1 */ + ret; + + if ((ret = flexcop_i2c_operation(fc,&r100,30)) != 0) + return ret; + + r104 = fc->read_ibi_reg(fc,tw_sm_c_104); + + deb_i2c("read: r100: %08x, r104: %08x\n",r100.raw,r104.raw); + + /* there is at least one byte, otherwise we wouldn't be here */ + buf[0] = r100.tw_sm_c_100.data1_reg; + + if (len > 0) buf[1] = r104.tw_sm_c_104.data2_reg; + if (len > 1) buf[2] = r104.tw_sm_c_104.data3_reg; + if (len > 2) buf[3] = r104.tw_sm_c_104.data4_reg; + + return 0; +} + +static int flexcop_i2c_write4(struct flexcop_device *fc, flexcop_ibi_value r100, u8 *buf) +{ + flexcop_ibi_value r104; + int len = r100.tw_sm_c_100.total_bytes; /* remember total_bytes is buflen-1 */ + r104.raw = 0; + + /* there is at least one byte, otherwise we wouldn't be here */ + r100.tw_sm_c_100.data1_reg = buf[0]; + + r104.tw_sm_c_104.data2_reg = len > 0 ? buf[1] : 0; + r104.tw_sm_c_104.data3_reg = len > 1 ? buf[2] : 0; + r104.tw_sm_c_104.data4_reg = len > 2 ? buf[3] : 0; + + deb_i2c("write: r100: %08x, r104: %08x\n",r100.raw,r104.raw); + + /* write the additional i2c data before doing the actual i2c operation */ + fc->write_ibi_reg(fc,tw_sm_c_104,r104); + + return flexcop_i2c_operation(fc,&r100,30); +} + +/* master xfer callback for demodulator */ +static int flexcop_master_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg msgs[], int num) +{ + struct flexcop_device *fc = i2c_get_adapdata(i2c_adap); + int i, ret = 0; + + if (down_interruptible(&fc->i2c_sem)) + return -ERESTARTSYS; + + /* reading */ + if (num == 2 && + msgs[0].flags == 0 && + msgs[1].flags == I2C_M_RD && + msgs[0].buf != NULL && + msgs[1].buf != NULL) { + + ret = fc->i2c_request(fc, FC_READ, FC_I2C_PORT_DEMOD, msgs[0].addr, msgs[0].buf[0], msgs[1].buf, msgs[1].len); + + } else for (i = 0; i < num; i++) { /* writing command */ + if (msgs[i].flags != 0 || msgs[i].buf == NULL || msgs[i].len < 2) { + ret = -EINVAL; + break; + } + + ret = fc->i2c_request(fc, FC_WRITE, FC_I2C_PORT_DEMOD, msgs[i].addr, msgs[i].buf[0], &msgs[i].buf[1], msgs[i].len - 1); + } + + if (ret < 0) + err("i2c master_xfer failed"); + else + ret = num; + + up(&fc->i2c_sem); + + return ret; +} + +int flexcop_i2c_request(struct flexcop_device *fc, flexcop_access_op_t op, + flexcop_i2c_port_t port, u8 chipaddr, u8 addr, u8 *buf, u16 len) +{ + int ret; + u16 bytes_to_transfer; + flexcop_ibi_value r100; + + deb_i2c("op = %d\n",op); + r100.raw = 0; + r100.tw_sm_c_100.chipaddr = chipaddr; + r100.tw_sm_c_100.twoWS_rw = op; + r100.tw_sm_c_100.twoWS_port_reg = port; + + while (len != 0) { + bytes_to_transfer = len > 4 ? 4 : len; + + r100.tw_sm_c_100.total_bytes = bytes_to_transfer - 1; + r100.tw_sm_c_100.baseaddr = addr; + + if (op == FC_READ) + ret = flexcop_i2c_read4(fc, r100, buf); + else + ret = flexcop_i2c_write4(fc,r100, buf); + + if (ret < 0) + return ret; + + buf += bytes_to_transfer; + addr += bytes_to_transfer; + len -= bytes_to_transfer; + }; + + return 0; +} +/* exported for PCI i2c */ +EXPORT_SYMBOL(flexcop_i2c_request); + +static u32 flexcop_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C; +} + +static struct i2c_algorithm flexcop_algo = { + .name = "FlexCop I2C algorithm", + .id = I2C_ALGO_BIT, + .master_xfer = flexcop_master_xfer, + .functionality = flexcop_i2c_func, +}; + +int flexcop_i2c_init(struct flexcop_device *fc) +{ + int ret; + + sema_init(&fc->i2c_sem,1); + + memset(&fc->i2c_adap, 0, sizeof(struct i2c_adapter)); + strncpy(fc->i2c_adap.name, "B2C2 FlexCop device",I2C_NAME_SIZE); + + i2c_set_adapdata(&fc->i2c_adap,fc); + + fc->i2c_adap.class = I2C_CLASS_TV_DIGITAL; + fc->i2c_adap.algo = &flexcop_algo; + fc->i2c_adap.algo_data = NULL; + fc->i2c_adap.id = I2C_ALGO_BIT; + + if ((ret = i2c_add_adapter(&fc->i2c_adap)) < 0) + return ret; + + fc->init_state |= FC_STATE_I2C_INIT; + return 0; +} + +void flexcop_i2c_exit(struct flexcop_device *fc) +{ + if (fc->init_state & FC_STATE_I2C_INIT) + i2c_del_adapter(&fc->i2c_adap); + + fc->init_state &= ~FC_STATE_I2C_INIT; +} diff --git a/drivers/media/dvb/b2c2/flexcop-misc.c b/drivers/media/dvb/b2c2/flexcop-misc.c new file mode 100644 index 00000000000..19e06da4677 --- /dev/null +++ b/drivers/media/dvb/b2c2/flexcop-misc.c @@ -0,0 +1,66 @@ +/* + * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III + * + * flexcop-misc.c - miscellaneous functions. + * + * see flexcop.c for copyright information. + */ +#include "flexcop.h" + +void flexcop_determine_revision(struct flexcop_device *fc) +{ + flexcop_ibi_value v = fc->read_ibi_reg(fc,misc_204); + + switch (v.misc_204.Rev_N_sig_revision_hi) { + case 0x2: + deb_info("found a FlexCopII.\n"); + fc->rev = FLEXCOP_II; + break; + case 0x3: + deb_info("found a FlexCopIIb.\n"); + fc->rev = FLEXCOP_IIB; + break; + case 0x0: + deb_info("found a FlexCopIII.\n"); + fc->rev = FLEXCOP_III; + break; + default: + err("unkown FlexCop Revision: %x. Please report the linux-dvb@linuxtv.org.",v.misc_204.Rev_N_sig_revision_hi); + break; + } + + if ((fc->has_32_hw_pid_filter = v.misc_204.Rev_N_sig_caps)) + deb_info("this FlexCop has the additional 32 hardware pid filter.\n"); + else + deb_info("this FlexCop has only the 6 basic main hardware pid filter.\n"); + /* bus parts have to decide if hw pid filtering is used or not. */ +} + +const char *flexcop_revision_names[] = { + "Unkown chip", + "FlexCopII", + "FlexCopIIb", + "FlexCopIII", +}; + +const char *flexcop_device_names[] = { + "Unkown device", + "AirStar 2 DVB-T", + "AirStar 2 ATSC", + "SkyStar 2 DVB-S", + "SkyStar 2 DVB-S (old version)", + "CableStar 2 DVB-C", +}; + +const char *flexcop_bus_names[] = { + "USB", + "PCI", +}; + +void flexcop_device_name(struct flexcop_device *fc,const char *prefix,const + char *suffix) +{ + info("%s '%s' at the '%s' bus controlled by a '%s' %s",prefix, + flexcop_device_names[fc->dev_type],flexcop_bus_names[fc->bus_type], + flexcop_revision_names[fc->rev],suffix); +} diff --git a/drivers/media/dvb/b2c2/flexcop-pci.c b/drivers/media/dvb/b2c2/flexcop-pci.c new file mode 100644 index 00000000000..693af41f337 --- /dev/null +++ b/drivers/media/dvb/b2c2/flexcop-pci.c @@ -0,0 +1,365 @@ +/* + * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III + * + * flexcop-pci.c - covers the PCI part including DMA transfers. + * + * see flexcop.c for copyright information. + */ + +#define FC_LOG_PREFIX "flexcop-pci" +#include "flexcop-common.h" + +static int enable_pid_filtering = 0; +module_param(enable_pid_filtering, int, 0444); +MODULE_PARM_DESC(enable_pid_filtering, "enable hardware pid filtering: supported values: 0 (fullts), 1"); + +#ifdef CONFIG_DVB_B2C2_FLEXCOP_DEBUG +#define dprintk(level,args...) \ + do { if ((debug & level)) printk(args); } while (0) +#define DEBSTATUS "" +#else +#define dprintk(level,args...) +#define DEBSTATUS " (debugging is not enabled)" +#endif + +#define deb_info(args...) dprintk(0x01,args) +#define deb_reg(args...) dprintk(0x02,args) +#define deb_ts(args...) dprintk(0x04,args) +#define deb_irq(args...) dprintk(0x08,args) + +static int debug = 0; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "set debug level (1=info,2=regs,4=TS,8=irqdma (|-able))." DEBSTATUS); + +#define DRIVER_VERSION "0.1" +#define DRIVER_NAME "Technisat/B2C2 FlexCop II/IIb/III Digital TV PCI Driver" +#define DRIVER_AUTHOR "Patrick Boettcher <patrick.boettcher@desy.de>" + +struct flexcop_pci { + struct pci_dev *pdev; + +#define FC_PCI_INIT 0x01 +#define FC_PCI_DMA_INIT 0x02 + int init_state; + + void __iomem *io_mem; + u32 irq; +/* buffersize (at least for DMA1, need to be % 188 == 0, + * this is logic is required */ +#define FC_DEFAULT_DMA1_BUFSIZE (1280 * 188) +#define FC_DEFAULT_DMA2_BUFSIZE (10 * 188) + struct flexcop_dma dma[2]; + + int active_dma1_addr; /* 0 = addr0 of dma1; 1 = addr1 of dma1 */ + u32 last_dma1_cur_pos; /* position of the pointer last time the timer/packet irq occured */ + + struct flexcop_device *fc_dev; +}; + +static int lastwreg,lastwval,lastrreg,lastrval; + +static flexcop_ibi_value flexcop_pci_read_ibi_reg (struct flexcop_device *fc, flexcop_ibi_register r) +{ + struct flexcop_pci *fc_pci = fc->bus_specific; + flexcop_ibi_value v; + v.raw = readl(fc_pci->io_mem + r); + + if (lastrreg != r || lastrval != v.raw) { + lastrreg = r; lastrval = v.raw; + deb_reg("new rd: %3x: %08x\n",r,v.raw); + } + + return v; +} + +static int flexcop_pci_write_ibi_reg(struct flexcop_device *fc, flexcop_ibi_register r, flexcop_ibi_value v) +{ + struct flexcop_pci *fc_pci = fc->bus_specific; + + if (lastwreg != r || lastwval != v.raw) { + lastwreg = r; lastwval = v.raw; + deb_reg("new wr: %3x: %08x\n",r,v.raw); + } + + writel(v.raw, fc_pci->io_mem + r); + return 0; +} + +/* When PID filtering is turned on, we use the timer IRQ, because small amounts + * of data need to be passed to the user space instantly as well. When PID + * filtering is turned off, we use the page-change-IRQ */ +static irqreturn_t flexcop_pci_irq(int irq, void *dev_id, struct pt_regs *regs) +{ + struct flexcop_pci *fc_pci = dev_id; + struct flexcop_device *fc = fc_pci->fc_dev; + flexcop_ibi_value v = fc->read_ibi_reg(fc,irq_20c); + + deb_irq("irq: %08x cur_addr: %08x (%d), our addrs. 1: %08x 2: %08x; 0x000: " + "%08x, 0x00c: %08x\n",v.raw, + fc->read_ibi_reg(fc,dma1_008).dma_0x8.dma_cur_addr << 2, + fc_pci->active_dma1_addr, + fc_pci->dma[0].dma_addr0,fc_pci->dma[0].dma_addr1, + fc->read_ibi_reg(fc,dma1_000).raw, + fc->read_ibi_reg(fc,dma1_00c).raw); + + if (v.irq_20c.DMA1_IRQ_Status == 1) { + if (fc_pci->active_dma1_addr == 0) + flexcop_pass_dmx_packets(fc_pci->fc_dev,fc_pci->dma[0].cpu_addr0,fc_pci->dma[0].size / 188); + else + flexcop_pass_dmx_packets(fc_pci->fc_dev,fc_pci->dma[0].cpu_addr1,fc_pci->dma[0].size / 188); + + deb_irq("page change to page: %d\n",!fc_pci->active_dma1_addr); + fc_pci->active_dma1_addr = !fc_pci->active_dma1_addr; + } else if (v.irq_20c.DMA1_Timer_Status == 1) { + /* for the timer IRQ we only can use buffer dmx feeding, because we don't have + * complete TS packets when reading from the DMA memory */ + dma_addr_t cur_addr = + fc->read_ibi_reg(fc,dma1_008).dma_0x8.dma_cur_addr << 2; + u32 cur_pos = cur_addr - fc_pci->dma[0].dma_addr0; + + /* buffer end was reached, restarted from the beginning + * pass the data from last_cur_pos to the buffer end to the demux + */ + if (cur_pos < fc_pci->last_dma1_cur_pos) { + flexcop_pass_dmx_data(fc_pci->fc_dev, + fc_pci->dma[0].cpu_addr0 + fc_pci->last_dma1_cur_pos, + (fc_pci->dma[0].size*2 - 1) - fc_pci->last_dma1_cur_pos); + fc_pci->last_dma1_cur_pos = 0; + } + + if (cur_pos > fc_pci->last_dma1_cur_pos) { + flexcop_pass_dmx_data(fc_pci->fc_dev, + fc_pci->dma[0].cpu_addr0 + fc_pci->last_dma1_cur_pos, + cur_pos - fc_pci->last_dma1_cur_pos); + } + + fc_pci->last_dma1_cur_pos = cur_pos; + } + +/* packet count would be ideal for hw filtering, but it isn't working. Either + * the data book is wrong, or I'm unable to read it correctly */ + +/* if (v.irq_20c.DMA1_Size_IRQ_Status == 1) { packet counter */ + + return IRQ_HANDLED; +} + +static int flexcop_pci_stream_control(struct flexcop_device *fc, int onoff) +{ + struct flexcop_pci *fc_pci = fc->bus_specific; + if (onoff) { + flexcop_dma_config(fc,&fc_pci->dma[0],FC_DMA_1,FC_DMA_SUBADDR_0 | FC_DMA_SUBADDR_1); + flexcop_dma_config(fc,&fc_pci->dma[1],FC_DMA_2,FC_DMA_SUBADDR_0 | FC_DMA_SUBADDR_1); + flexcop_dma_config_timer(fc,FC_DMA_1,1); + + if (fc_pci->fc_dev->pid_filtering) { + fc_pci->last_dma1_cur_pos = 0; + flexcop_dma_control_timer_irq(fc,FC_DMA_1,1); + } else { + fc_pci->active_dma1_addr = 0; + flexcop_dma_control_size_irq(fc,FC_DMA_1,1); + } + +/* flexcop_dma_config_packet_count(fc,FC_DMA_1,0xc0); + flexcop_dma_control_packet_irq(fc,FC_DMA_1,1); */ + + deb_irq("irqs enabled\n"); + } else { + if (fc_pci->fc_dev->pid_filtering) + flexcop_dma_control_timer_irq(fc,FC_DMA_1,0); + else + flexcop_dma_control_size_irq(fc,FC_DMA_1,0); + +// flexcop_dma_control_packet_irq(fc,FC_DMA_1,0); + deb_irq("irqs disabled\n"); + } + + return 0; +} + +static int flexcop_pci_dma_init(struct flexcop_pci *fc_pci) +{ + int ret; + if ((ret = flexcop_dma_allocate(fc_pci->pdev,&fc_pci->dma[0],FC_DEFAULT_DMA1_BUFSIZE)) != 0) + return ret; + + if ((ret = flexcop_dma_allocate(fc_pci->pdev,&fc_pci->dma[1],FC_DEFAULT_DMA2_BUFSIZE)) != 0) + goto dma1_free; + + flexcop_sram_set_dest(fc_pci->fc_dev,FC_SRAM_DEST_MEDIA | FC_SRAM_DEST_NET, FC_SRAM_DEST_TARGET_DMA1); + flexcop_sram_set_dest(fc_pci->fc_dev,FC_SRAM_DEST_CAO | FC_SRAM_DEST_CAI, FC_SRAM_DEST_TARGET_DMA2); + + fc_pci->init_state |= FC_PCI_DMA_INIT; + goto success; +dma1_free: + flexcop_dma_free(&fc_pci->dma[0]); + +success: + return ret; +} + +static void flexcop_pci_dma_exit(struct flexcop_pci *fc_pci) +{ + if (fc_pci->init_state & FC_PCI_DMA_INIT) { + flexcop_dma_free(&fc_pci->dma[0]); + flexcop_dma_free(&fc_pci->dma[1]); + } + fc_pci->init_state &= ~FC_PCI_DMA_INIT; +} + +static int flexcop_pci_init(struct flexcop_pci *fc_pci) +{ + int ret; + u8 card_rev; + + pci_read_config_byte(fc_pci->pdev, PCI_CLASS_REVISION, &card_rev); + info("card revision %x", card_rev); + + if ((ret = pci_enable_device(fc_pci->pdev)) != 0) + return ret; + + pci_set_master(fc_pci->pdev); + + /* enable interrupts */ + // pci_write_config_dword(pdev, 0x6c, 0x8000); + + if ((ret = pci_request_regions(fc_pci->pdev, DRIVER_NAME)) != 0) + goto err_pci_disable_device; + + fc_pci->io_mem = pci_iomap(fc_pci->pdev, 0, 0x800); + + if (!fc_pci->io_mem) { + err("cannot map io memory\n"); + ret = -EIO; + goto err_pci_release_regions; + } + + pci_set_drvdata(fc_pci->pdev, fc_pci); + + if ((ret = request_irq(fc_pci->pdev->irq, flexcop_pci_irq, + SA_SHIRQ, DRIVER_NAME, fc_pci)) != 0) + goto err_pci_iounmap; + + fc_pci->init_state |= FC_PCI_INIT; + goto success; + +err_pci_iounmap: + pci_iounmap(fc_pci->pdev, fc_pci->io_mem); + pci_set_drvdata(fc_pci->pdev, NULL); +err_pci_release_regions: + pci_release_regions(fc_pci->pdev); +err_pci_disable_device: + pci_disable_device(fc_pci->pdev); + +success: + return ret; +} + +static void flexcop_pci_exit(struct flexcop_pci *fc_pci) +{ + if (fc_pci->init_state & FC_PCI_INIT) { + free_irq(fc_pci->pdev->irq, fc_pci); + pci_iounmap(fc_pci->pdev, fc_pci->io_mem); + pci_set_drvdata(fc_pci->pdev, NULL); + pci_release_regions(fc_pci->pdev); + pci_disable_device(fc_pci->pdev); + } + fc_pci->init_state &= ~FC_PCI_INIT; +} + + +static int flexcop_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + struct flexcop_device *fc; + struct flexcop_pci *fc_pci; + int ret = -ENOMEM; + + if ((fc = flexcop_device_kmalloc(sizeof(struct flexcop_pci))) == NULL) { + err("out of memory\n"); + return -ENOMEM; + } + +/* general flexcop init */ + fc_pci = fc->bus_specific; + fc_pci->fc_dev = fc; + + fc->read_ibi_reg = flexcop_pci_read_ibi_reg; + fc->write_ibi_reg = flexcop_pci_write_ibi_reg; + fc->i2c_request = flexcop_i2c_request; + fc->get_mac_addr = flexcop_eeprom_check_mac_addr; + + fc->stream_control = flexcop_pci_stream_control; + + fc->pid_filtering = enable_pid_filtering; + fc->bus_type = FC_PCI; + + fc->dev = &pdev->dev; + +/* bus specific part */ + fc_pci->pdev = pdev; + if ((ret = flexcop_pci_init(fc_pci)) != 0) + goto err_kfree; + +/* init flexcop */ + if ((ret = flexcop_device_initialize(fc)) != 0) + goto err_pci_exit; + +/* init dma */ + if ((ret = flexcop_pci_dma_init(fc_pci)) != 0) + goto err_fc_exit; + + goto success; +err_fc_exit: + flexcop_device_exit(fc); +err_pci_exit: + flexcop_pci_exit(fc_pci); +err_kfree: + flexcop_device_kfree(fc); +success: + return ret; +} + +/* in theory every _exit function should be called exactly two times, + * here and in the bail-out-part of the _init-function + */ +static void flexcop_pci_remove(struct pci_dev *pdev) +{ + struct flexcop_pci *fc_pci = pci_get_drvdata(pdev); + + flexcop_pci_dma_exit(fc_pci); + flexcop_device_exit(fc_pci->fc_dev); + flexcop_pci_exit(fc_pci); + flexcop_device_kfree(fc_pci->fc_dev); +} + +static struct pci_device_id flexcop_pci_tbl[] = { + { PCI_DEVICE(0x13d0, 0x2103) }, +/* { PCI_DEVICE(0x13d0, 0x2200) }, PCI FlexCopIII ? */ + { }, +}; + +MODULE_DEVICE_TABLE(pci, flexcop_pci_tbl); + +static struct pci_driver flexcop_pci_driver = { + .name = "Technisat/B2C2 FlexCop II/IIb/III PCI", + .id_table = flexcop_pci_tbl, + .probe = flexcop_pci_probe, + .remove = flexcop_pci_remove, +}; + +static int __init flexcop_pci_module_init(void) +{ + return pci_register_driver(&flexcop_pci_driver); +} + +static void __exit flexcop_pci_module_exit(void) +{ + pci_unregister_driver(&flexcop_pci_driver); +} + +module_init(flexcop_pci_module_init); +module_exit(flexcop_pci_module_exit); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_NAME); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/b2c2/flexcop-reg.h b/drivers/media/dvb/b2c2/flexcop-reg.h new file mode 100644 index 00000000000..41835c5280a --- /dev/null +++ b/drivers/media/dvb/b2c2/flexcop-reg.h @@ -0,0 +1,700 @@ +/* + * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III + * + * flexcop-reg.h - register abstraction for FlexCopII, FlexCopIIb and FlexCopIII + * + * see flexcop.c for copyright information. + */ +#ifndef __FLEXCOP_REG_H__ +#define __FLEXCOP_REG_H__ + + +typedef enum { + FLEXCOP_UNK = 0, + FLEXCOP_II, + FLEXCOP_IIB, + FLEXCOP_III, +} flexcop_revision_t; + +extern const char *flexcop_revision_names[]; + +typedef enum { + FC_UNK = 0, + FC_AIR_DVB, + FC_AIR_ATSC, + FC_SKY, + FC_SKY_OLD, + FC_CABLE, +} flexcop_device_type_t; + +typedef enum { + FC_USB = 0, + FC_PCI, +} flexcop_bus_t; + +extern const char *flexcop_device_names[]; + +/* FlexCop IBI Registers */ + +/* flexcop_ibi_reg - a huge union representing the register structure */ +typedef union { + u32 raw; + +/* DMA 0x000 to 0x01c + * DMA1 0x000 to 0x00c + * DMA2 0x010 to 0x01c + */ + struct { + u32 dma_0start : 1; /* set: data will be delivered to dma1_address0 */ + u32 dma_0No_update : 1; /* set: dma1_cur_address will be updated, unset: no update */ + u32 dma_address0 :30; /* physical/virtual host memory address0 DMA */ + } dma_0x0; + + struct { + u32 DMA_maxpackets : 8; /* (remapped) PCI DMA1 Packet Count Interrupt. This variable + is able to be read and written while bit(1) of register + 0x00c (remap_enable) is set. This variable represents + the number of packets that will be transmitted to the PCI + host using PCI DMA1 before an interrupt to the PCI is + asserted. This functionality may be enabled using bit(20) + of register 0x208. N=0 disables the IRQ. */ + u32 dma_addr_size :24; /* size of memory buffer in DWORDs (bytesize / 4) for DMA */ + } dma_0x4_remap; + + struct { + u32 dma1timer : 7; /* reading PCI DMA1 timer ... when remap_enable is 0 */ + u32 unused : 1; + u32 dma_addr_size :24; + } dma_0x4_read; + + struct { + u32 unused : 1; + u32 dmatimer : 7; /* writing PCI DMA1 timer ... when remap_enable is 0 */ + u32 dma_addr_size :24; + } dma_0x4_write; + + struct { + u32 unused : 2; + u32 dma_cur_addr :30; /* current physical host memory address pointer for DMA */ + } dma_0x8; + + struct { + u32 dma_1start : 1; /* set: data will be delivered to dma_address1, when dma_address0 is full */ + u32 remap_enable : 1; /* remap enable for 0x0x4(7:0) */ + u32 dma_address1 :30; /* Physical/virtual address 1 on DMA */ + } dma_0xc; + +/* Two-wire Serial Master and Clock 0x100-0x110 */ + struct { +// u32 slave_transmitter : 1; /* ???*/ + u32 chipaddr : 7; /* two-line serial address of the target slave */ + u32 reserved1 : 1; + u32 baseaddr : 8; /* address of the location of the read/write operation */ + u32 data1_reg : 8; /* first byte in two-line serial read/write operation */ + u32 working_start : 1; /* when doing a write operation this indicator is 0 when ready + * set to 1 when doing a write operation */ + u32 twoWS_rw : 1; /* read/write indicator (1 = read, 0 write) */ + u32 total_bytes : 2; /* number of data bytes in each two-line serial transaction (0 = 1 byte, 11 = 4byte)*/ + u32 twoWS_port_reg : 2; /* port selection: 01 - Front End/Demod, 10 - EEPROM, 11 - Tuner */ + u32 no_base_addr_ack_error : 1; /* writing: write-req: frame is produced w/o baseaddr, read-req: read-cycles w/o + * preceding address assignment write frame + * ACK_ERROR = 1 when no ACK from slave in the last transaction */ + u32 st_done : 1; /* indicator for transaction is done */ + } tw_sm_c_100; + + struct { + u32 data2_reg : 8; /* 2nd data byte */ + u32 data3_reg : 8; /* 3rd data byte */ + u32 data4_reg : 8; /* 4th data byte */ + u32 exlicit_stops : 1; /* when set, transactions are produced w/o trailing STOP flag, then send isolated STOP flags */ + u32 force_stop : 1; /* isolated stop flag */ + u32 unused : 6; + } tw_sm_c_104; + +/* Clock. The register allows the FCIII to convert an incoming Master clock + * (MCLK) signal into a lower frequency clock through the use of a LowCounter + * (TLO) and a High- Counter (THI). The time counts for THI and TLO are + * measured in MCLK; each count represents 4 MCLK input clock cycles. + * + * The default output for port #1 is set for Front End Demod communication. (0x108) + * The default output for port #2 is set for EEPROM communication. (0x10c) + * The default output for port #3 is set for Tuner communication. (0x110) + */ + struct { + u32 thi1 : 6; /* Thi for port #1 (def: 100110b; 38) */ + u32 reserved1 : 2; + u32 tlo1 : 5; /* Tlo for port #1 (def: 11100b; 28) */ + u32 reserved2 :19; + } tw_sm_c_108; + + struct { + u32 thi1 : 6; /* Thi for port #2 (def: 111001b; 57) */ + u32 reserved1 : 2; + u32 tlo1 : 5; /* Tlo for port #2 (def: 11100b; 28) */ + u32 reserved2 :19; + } tw_sm_c_10c; + + struct { + u32 thi1 : 6; /* Thi for port #3 (def: 111001b; 57) */ + u32 reserved1 : 2; + u32 tlo1 : 5; /* Tlo for port #3 (def: 11100b; 28) */ + u32 reserved2 :19; + } tw_sm_c_110; + +/* LNB Switch Frequency 0x200 + * Clock that creates the LNB switch tone. The default is set to have a fixed + * low output (not oscillating) to the LNB_CTL line. + */ + struct { + u32 LNB_CTLHighCount_sig :15; /* It is the number of pre-scaled clock cycles that will be low. */ + u32 LNB_CTLLowCount_sig :15; /* For example, to obtain a 22KHz output given a 45 Mhz Master + Clock signal (MCLK), set PreScalar=01 and LowCounter value to 0x1ff. */ + u32 LNB_CTLPrescaler_sig : 2; /* pre-scaler divides MCLK: 00 (no division), 01 by 2, 10 by 4, 11 by 12 */ + } lnb_switch_freq_200; + +/* ACPI, Peripheral Reset, LNB Polarity + * ACPI power conservation mode, LNB polarity selection (low or high voltage), + * and peripheral reset. + */ + struct { + u32 ACPI1_sig : 1; /* turn of the power of tuner and LNB, not implemented in FCIII */ + u32 ACPI3_sig : 1; /* turn of power of the complete satelite receiver board (except FCIII) */ + u32 LNB_L_H_sig : 1; /* low or high voltage for LNB. (0 = low, 1 = high) */ + u32 Per_reset_sig : 1; /* misc. init reset (default: 1), to reset set to low and back to high */ + u32 reserved :20; + u32 Rev_N_sig_revision_hi : 4;/* 0xc in case of FCIII */ + u32 Rev_N_sig_reserved1 : 2; + u32 Rev_N_sig_caps : 1; /* if 1, FCIII has 32 PID- and MAC-filters and is capable of IP multicast */ + u32 Rev_N_sig_reserved2 : 1; + } misc_204; + +/* Control and Status 0x208 to 0x21c */ +/* Gross enable and disable control */ + struct { + u32 Stream1_filter_sig : 1; /* Stream1 PID filtering */ + u32 Stream2_filter_sig : 1; /* Stream2 PID filtering */ + u32 PCR_filter_sig : 1; /* PCR PID filter */ + u32 PMT_filter_sig : 1; /* PMT PID filter */ + + u32 EMM_filter_sig : 1; /* EMM PID filter */ + u32 ECM_filter_sig : 1; /* ECM PID filter */ + u32 Null_filter_sig : 1; /* Filters null packets, PID=0x1fff. */ + u32 Mask_filter_sig : 1; /* mask PID filter */ + + u32 WAN_Enable_sig : 1; /* WAN output line through V8 memory space is activated. */ + u32 WAN_CA_Enable_sig : 1; /* not in FCIII */ + u32 CA_Enable_sig : 1; /* not in FCIII */ + u32 SMC_Enable_sig : 1; /* CI stream data (CAI) goes directly to the smart card intf (opposed IBI 0x600 or SC-cmd buf). */ + + u32 Per_CA_Enable_sig : 1; /* not in FCIII */ + u32 Multi2_Enable_sig : 1; /* ? */ + u32 MAC_filter_Mode_sig : 1; /* (MAC_filter_enable) Globally enables MAC filters for Net PID filteres. */ + u32 Rcv_Data_sig : 1; /* PID filtering module enable. When this bit is a one, the PID filter will + examine and process packets according to all other (individual) PID + filtering controls. If it a zero, no packet processing of any kind will + take place. All data from the tuner will be thrown away. */ + + u32 DMA1_IRQ_Enable_sig : 1; /* When set, a DWORD counter is enabled on PCI DMA1 that asserts the PCI + * interrupt after the specified count for filling the buffer. */ + u32 DMA1_Timer_Enable_sig : 1; /* When set, a timer is enabled on PCI DMA1 that asserts the PCI interrupt + after a specified amount of time. */ + u32 DMA2_IRQ_Enable_sig : 1; /* same as DMA1_IRQ_Enable_sig but for DMA2 */ + u32 DMA2_Timer_Enable_sig : 1; /* same as DMA1_Timer_Enable_sig but for DMA2 */ + + u32 DMA1_Size_IRQ_Enable_sig : 1; /* When set, a packet count detector is enabled on PCI DMA1 that asserts the PCI interrupt. */ + u32 DMA2_Size_IRQ_Enable_sig : 1; /* When set, a packet count detector is enabled on PCI DMA2 that asserts the PCI interrupt. */ + u32 Mailbox_from_V8_Enable_sig: 1; /* When set, writes to the mailbox register produce an interrupt to the + PCI host to indicate that mailbox data is available. */ + + u32 unused : 9; + } ctrl_208; + +/* General status. When a PCI interrupt occurs, this register is read to + * discover the reason for the interrupt. + */ + struct { + u32 DMA1_IRQ_Status : 1; /* When set(1) the DMA1 counter had generated an IRQ. Read Only. */ + u32 DMA1_Timer_Status : 1; /* When set(1) the DMA1 timer had generated an IRQ. Read Only. */ + u32 DMA2_IRQ_Status : 1; /* When set(1) the DMA2 counter had generated an IRQ. Read Only. */ + u32 DMA2_Timer_Status : 1; /* When set(1) the DMA2 timer had generated an IRQ. Read Only. */ + u32 DMA1_Size_IRQ_Status : 1; /* (Read only). This register is read after an interrupt to */ + u32 DMA2_Size_IRQ_Status : 1; /* find out why we had an IRQ. Reading this register will clear this bit. Packet count*/ + u32 Mailbox_from_V8_Status_sig: 1; /* Same as above. Reading this register will clear this bit. */ + u32 Data_receiver_error : 1; /* 1 indicate an error in the receiver Front End (Tuner module) */ + u32 Continuity_error_flag : 1; /* 1 indicates a continuity error in the TS stream. */ + u32 LLC_SNAP_FLAG_set : 1; /* 1 indicates that the LCC_SNAP_FLAG was set. */ + u32 Transport_Error : 1; /* When set indicates that an unexpected packet was received. */ + u32 reserved :21; + } irq_20c; + + +/* Software reset register */ + struct { + u32 reset_blocks : 8; /* Enabled when Block_reset_enable = 0xB2 and 0x208 bits 15:8 = 0x00. + Each bit location represents a 0x100 block of registers. Writing + a one in a bit location resets that block of registers and the logic + that it controls. */ + u32 Block_reset_enable : 8; /* This variable is set to 0xB2 when the register is written. */ + u32 Special_controls :16; /* Asserts Reset_V8 => 0xC258; Turns on pci encryption => 0xC25A; + Turns off pci encryption => 0xC259 Note: pci_encryption default + at power-up is ON. */ + } sw_reset_210; + + struct { + u32 vuart_oe_sig : 1; /* When clear, the V8 processor has sole control of the serial UART + (RS-232 Smart Card interface). When set, the IBI interface + defined by register 0x600 controls the serial UART. */ + u32 v2WS_oe_sig : 1; /* When clear, the V8 processor has direct control of the Two-line + Serial Master EEPROM target. When set, the Two-line Serial Master + EEPROM target interface is controlled by IBI register 0x100. */ + u32 halt_V8_sig : 1; /* When set, contiguous wait states are applied to the V8-space + bus masters. Once this signal is cleared, normal V8-space + operations resume. */ + u32 section_pkg_enable_sig: 1; /* When set, this signal enables the front end translation circuitry + to process section packed transport streams. */ + u32 s2p_sel_sig : 1; /* Serial to parallel conversion. When set, polarized transport data + within the FlexCop3 front end circuitry is converted from a serial + stream into parallel data before downstream processing otherwise + interprets the data. */ + u32 unused1 : 3; + u32 polarity_PS_CLK_sig: 1; /* This signal is used to invert the input polarity of the tranport + stream CLOCK signal before any processing occurs on the transport + stream within FlexCop3. */ + u32 polarity_PS_VALID_sig: 1; /* This signal is used to invert the input polarity of the tranport + stream VALID signal before any processing occurs on the transport + stream within FlexCop3. */ + u32 polarity_PS_SYNC_sig: 1; /* This signal is used to invert the input polarity of the tranport + stream SYNC signal before any processing occurs on the transport + stream within FlexCop3. */ + u32 polarity_PS_ERR_sig: 1; /* This signal is used to invert the input polarity of the tranport + stream ERROR signal before any processing occurs on the transport + stream within FlexCop3. */ + u32 unused2 :20; + } misc_214; + +/* Mailbox from V8 to host */ + struct { + u32 Mailbox_from_V8 :32; /* When this register is written by either the V8 processor or by an + end host, an interrupt is generated to the PCI host to indicate + that mailbox data is available. Reading register 20c will clear + the IRQ. */ + } mbox_v8_to_host_218; + +/* Mailbox from host to v8 Mailbox_to_V8 + * Mailbox_to_V8 mailbox storage register + * used to send messages from PCI to V8. Writing to this register will send an + * IRQ to the V8. Then it can read the data from here. Reading this register + * will clear the IRQ. If the V8 is halted and bit 31 of this register is set, + * then this register is used instead as a direct interface to access the + * V8space memory. + */ + struct { + u32 sysramaccess_data : 8; /* Data byte written or read from the specified address in V8 SysRAM. */ + u32 sysramaccess_addr :15; /* 15 bit address used to access V8 Sys-RAM. */ + u32 unused : 7; + u32 sysramaccess_write: 1; /* Write flag used to latch data into the V8 SysRAM. */ + u32 sysramaccess_busmuster: 1; /* Setting this bit when the V8 is halted at 0x214 Bit(2) allows + this IBI register interface to directly drive the V8-space memory. */ + } mbox_host_to_v8_21c; + + +/* PIDs, Translation Bit, SMC Filter Select 0x300 to 0x31c */ + struct { + u32 Stream1_PID :13; /* Primary use is receiving Net data, so these 13 bits normally + hold the PID value for the desired network stream. */ + u32 Stream1_trans : 1; /* When set, Net translation will take place for Net data ferried in TS packets. */ + u32 MAC_Multicast_filter : 1; /* When clear, multicast MAC filtering is not allowed for Stream1 and PID_n filters. */ + u32 debug_flag_pid_saved : 1; + u32 Stream2_PID :13; /* 13 bits for Stream 2 PID filter value. General use. */ + u32 Stream2_trans : 1; /* When set Tables/CAI translation will take place for the data ferried in + Stream2_PID TS packets. */ + u32 debug_flag_write_status00 : 1; + u32 debug_fifo_problem : 1; + } pid_filter_300; + + struct { + u32 PCR_PID :13; /* PCR stream PID filter value. Primary use is Program Clock Reference stream filtering. */ + u32 PCR_trans : 1; /* When set, Tables/CAI translation will take place for these packets. */ + u32 debug_overrun3 : 1; + u32 debug_overrun2 : 1; + u32 PMT_PID :13; /* stream PID filter value. Primary use is Program Management Table segment filtering. */ + u32 PMT_trans : 1; /* When set, Tables/CAI translation will take place for these packets. */ + u32 reserved : 2; + } pid_filter_304; + + struct { + u32 EMM_PID :13; /* EMM PID filter value. Primary use is Entitlement Management Messaging for + conditional access-related data. */ + u32 EMM_trans : 1; /* When set, Tables/CAI translation will take place for these packets. */ + u32 EMM_filter_4 : 1; /* When set will pass only EMM data possessing the same ID code as the + first four bytes (32 bits) of the end-user s 6-byte Smart Card ID number Select */ + u32 EMM_filter_6 : 1; /* When set will pass only EMM data possessing the same 6-byte code as the end-users + complete 6-byte Smart Card ID number. */ + u32 ECM_PID :13; /* ECM PID filter value. Primary use is Entitlement Control Messaging for conditional + access-related data. */ + u32 ECM_trans : 1; /* When set, Tables/CAI translation will take place for these packets. */ + u32 reserved : 2; + } pid_filter_308; + + struct { + u32 Group_PID :13; /* PID value for group filtering. */ + u32 Group_trans : 1; /* When set, Tables/CAI translation will take place for these packets. */ + u32 unused1 : 2; + u32 Group_mask :13; /* Mask value used in logical "and" equation that defines group filtering */ + u32 unused2 : 3; + } pid_filter_30c_ext_ind_0_7; + + struct { + u32 net_master_read :17; + u32 unused :15; + } pid_filter_30c_ext_ind_1; + + struct { + u32 net_master_write :17; + u32 unused :15; + } pid_filter_30c_ext_ind_2; + + struct { + u32 next_net_master_write :17; + u32 unused :15; + } pid_filter_30c_ext_ind_3; + + struct { + u32 unused1 : 1; + u32 state_write :10; + u32 reserved1 : 6; /* default: 000100 */ + u32 stack_read :10; + u32 reserved2 : 5; /* default: 00100 */ + } pid_filter_30c_ext_ind_4; + + struct { + u32 stack_cnt :10; + u32 unused :22; + } pid_filter_30c_ext_ind_5; + + struct { + u32 pid_fsm_save_reg0 : 2; + u32 pid_fsm_save_reg1 : 2; + u32 pid_fsm_save_reg2 : 2; + u32 pid_fsm_save_reg3 : 2; + u32 pid_fsm_save_reg4 : 2; + u32 pid_fsm_save_reg300 : 2; + u32 write_status1 : 2; + u32 write_status4 : 2; + u32 data_size_reg :12; + u32 unused : 4; + } pid_filter_30c_ext_ind_6; + + struct { + u32 index_reg : 5; /* (Index pointer) Points at an internal PIDn register. A binary code + representing one of 32 internal PIDn registers as well as its + corresponding internal MAC_lown register. */ + u32 extra_index_reg : 3; /* This vector is used to select between sets of debug signals routed to register 0x30c. */ + u32 AB_select : 1; /* Used in conjunction with 0x31c. read/write to the MAC_highA or MAC_highB register + 0=MAC_highB register, 1=MAC_highA */ + u32 pass_alltables : 1; /* 1=Net packets are not filtered against the Network Table ID found in register 0x400. + All types of networks (DVB, ATSC, ISDB) are passed. */ + u32 unused :22; + } index_reg_310; + + struct { + u32 PID :13; /* PID value */ + u32 PID_trans : 1; /* translation will take place for packets filtered */ + u32 PID_enable_bit : 1; /* When set this PID filter is enabled */ + u32 reserved :17; + } pid_n_reg_314; + + struct { + u32 A4_byte : 8; + u32 A5_byte : 8; + u32 A6_byte : 8; + u32 Enable_bit : 1; /* enabled (1) or disabled (1) */ + u32 HighAB_bit : 1; /* use MAC_highA (1) or MAC_highB (0) as MSB */ + u32 reserved : 6; + } mac_low_reg_318; + + struct { + u32 A1_byte : 8; + u32 A2_byte : 8; + u32 A3_byte : 8; + u32 reserved : 8; + } mac_high_reg_31c; + +/* Table, SMCID,MACDestination Filters 0x400 to 0x41c */ + struct { + u32 reserved :16; +#define fc_data_Tag_ID_DVB 0x3e +#define fc_data_Tag_ID_ATSC 0x3f +#define fc_data_Tag_ID_IDSB 0x8b + u32 data_Tag_ID :16; + } data_tag_400; + + struct { + u32 Card_IDbyte6 : 8; + u32 Card_IDbyte5 : 8; + u32 Card_IDbyte4 : 8; + u32 Card_IDbyte3 : 8; + } card_id_408; + + struct { + u32 Card_IDbyte2 : 8; + u32 Card_IDbyte1 : 8; + } card_id_40c; + + /* holding the unique mac address of the receiver which houses the FlexCopIII */ + struct { + u32 MAC1 : 8; + u32 MAC2 : 8; + u32 MAC3 : 8; + u32 MAC6 : 8; + } mac_address_418; + + struct { + u32 MAC7 : 8; + u32 MAC8 : 8; + u32 reserved : 16; + } mac_address_41c; + + struct { + u32 transmitter_data_byte : 8; + u32 ReceiveDataReady : 1; + u32 ReceiveByteFrameError: 1; + u32 txbuffempty : 1; + u32 reserved :21; + } ci_600; + + struct { + u32 pi_d : 8; + u32 pi_ha :20; + u32 pi_rw : 1; + u32 pi_component_reg : 3; + } pi_604; + + struct { + u32 serialReset : 1; + u32 oncecycle_read : 1; + u32 Timer_Read_req : 1; + u32 Timer_Load_req : 1; + u32 timer_data : 7; + u32 unused : 1; /* ??? not mentioned in data book */ + u32 Timer_addr : 5; + u32 reserved : 3; + u32 pcmcia_a_mod_pwr_n : 1; + u32 pcmcia_b_mod_pwr_n : 1; + u32 config_Done_stat : 1; + u32 config_Init_stat : 1; + u32 config_Prog_n : 1; + u32 config_wr_n : 1; + u32 config_cs_n : 1; + u32 config_cclk : 1; + u32 pi_CiMax_IRQ_n : 1; + u32 pi_timeout_status : 1; + u32 pi_wait_n : 1; + u32 pi_busy_n : 1; + } pi_608; + + struct { + u32 PID :13; + u32 key_enable : 1; +#define fc_key_code_default 0x1 +#define fc_key_code_even 0x2 +#define fc_key_code_odd 0x3 + u32 key_code : 2; + u32 key_array_col : 3; + u32 key_array_row : 5; + u32 dvb_en : 1; /* 0=TS bypasses the Descrambler */ + u32 rw_flag : 1; + u32 reserved : 6; + } dvb_reg_60c; + +/* SRAM and Output Destination 0x700 to 0x714 */ + struct { + u32 sram_addr :15; + u32 sram_rw : 1; /* 0=write, 1=read */ + u32 sram_data : 8; + u32 sc_xfer_bit : 1; + u32 reserved1 : 3; + u32 oe_pin_reg : 1; + u32 ce_pin_reg : 1; + u32 reserved2 : 1; + u32 start_sram_ibi : 1; + } sram_ctrl_reg_700; + + struct { + u32 net_addr_read :16; + u32 net_addr_write :16; + } net_buf_reg_704; + + struct { + u32 cai_read :11; + u32 reserved1 : 5; + u32 cai_write :11; + u32 reserved2 : 6; + u32 cai_cnt : 4; + } cai_buf_reg_708; + + struct { + u32 cao_read :11; + u32 reserved1 : 5; + u32 cap_write :11; + u32 reserved2 : 6; + u32 cao_cnt : 4; + } cao_buf_reg_70c; + + struct { + u32 media_read :11; + u32 reserved1 : 5; + u32 media_write :11; + u32 reserved2 : 6; + u32 media_cnt : 4; + } media_buf_reg_710; + + struct { + u32 NET_Dest : 2; + u32 CAI_Dest : 2; + u32 CAO_Dest : 2; + u32 MEDIA_Dest : 2; + u32 net_ovflow_error : 1; + u32 media_ovflow_error : 1; + u32 cai_ovflow_error : 1; + u32 cao_ovflow_error : 1; + u32 ctrl_usb_wan : 1; + u32 ctrl_sramdma : 1; + u32 ctrl_maximumfill : 1; + u32 reserved :17; + } sram_dest_reg_714; + + struct { + u32 net_cnt :12; + u32 reserved1 : 4; + u32 net_addr_read : 1; + u32 reserved2 : 3; + u32 net_addr_write : 1; + u32 reserved3 :11; + } net_buf_reg_718; + + struct { + u32 wan_speed_sig : 2; + u32 reserved1 : 6; + u32 wan_wait_state : 8; + u32 sram_chip : 2; + u32 sram_memmap : 2; + u32 reserved2 : 4; + u32 wan_pkt_frame : 4; + u32 reserved3 : 4; + } wan_ctrl_reg_71c; +} flexcop_ibi_value; + +extern flexcop_ibi_value ibi_zero; + +typedef enum { + FC_I2C_PORT_DEMOD = 1, + FC_I2C_PORT_EEPROM = 2, + FC_I2C_PORT_TUNER = 3, +} flexcop_i2c_port_t; + +typedef enum { + FC_WRITE = 0, + FC_READ = 1, +} flexcop_access_op_t; + +typedef enum { + FC_SRAM_DEST_NET = 1, + FC_SRAM_DEST_CAI = 2, + FC_SRAM_DEST_CAO = 4, + FC_SRAM_DEST_MEDIA = 8 +} flexcop_sram_dest_t; + +typedef enum { + FC_SRAM_DEST_TARGET_WAN_USB = 0, + FC_SRAM_DEST_TARGET_DMA1 = 1, + FC_SRAM_DEST_TARGET_DMA2 = 2, + FC_SRAM_DEST_TARGET_FC3_CA = 3 +} flexcop_sram_dest_target_t; + +typedef enum { + FC_SRAM_2_32KB = 0, /* 64KB */ + FC_SRAM_1_32KB = 1, /* 32KB - default fow FCII */ + FC_SRAM_1_128KB = 2, /* 128KB */ + FC_SRAM_1_48KB = 3, /* 48KB - default for FCIII */ +} flexcop_sram_type_t; + +typedef enum { + FC_WAN_SPEED_4MBITS = 0, + FC_WAN_SPEED_8MBITS = 1, + FC_WAN_SPEED_12MBITS = 2, + FC_WAN_SPEED_16MBITS = 3, +} flexcop_wan_speed_t; + +typedef enum { + FC_DMA_1 = 1, + FC_DMA_2 = 2, +} flexcop_dma_index_t; + +typedef enum { + FC_DMA_SUBADDR_0 = 1, + FC_DMA_SUBADDR_1 = 2, +} flexcop_dma_addr_index_t; + +/* names of the particular registers */ +typedef enum { + dma1_000 = 0x000, + dma1_004 = 0x004, + dma1_008 = 0x008, + dma1_00c = 0x00c, + dma2_010 = 0x010, + dma2_014 = 0x014, + dma2_018 = 0x018, + dma2_01c = 0x01c, + + tw_sm_c_100 = 0x100, + tw_sm_c_104 = 0x104, + tw_sm_c_108 = 0x108, + tw_sm_c_10c = 0x10c, + tw_sm_c_110 = 0x110, + + lnb_switch_freq_200 = 0x200, + misc_204 = 0x204, + ctrl_208 = 0x208, + irq_20c = 0x20c, + sw_reset_210 = 0x210, + misc_214 = 0x214, + mbox_v8_to_host_218 = 0x218, + mbox_host_to_v8_21c = 0x21c, + + pid_filter_300 = 0x300, + pid_filter_304 = 0x304, + pid_filter_308 = 0x308, + pid_filter_30c = 0x30c, + index_reg_310 = 0x310, + pid_n_reg_314 = 0x314, + mac_low_reg_318 = 0x318, + mac_high_reg_31c = 0x31c, + + data_tag_400 = 0x400, + card_id_408 = 0x408, + card_id_40c = 0x40c, + mac_address_418 = 0x418, + mac_address_41c = 0x41c, + + ci_600 = 0x600, + pi_604 = 0x604, + pi_608 = 0x608, + dvb_reg_60c = 0x60c, + + sram_ctrl_reg_700 = 0x700, + net_buf_reg_704 = 0x704, + cai_buf_reg_708 = 0x708, + cao_buf_reg_70c = 0x70c, + media_buf_reg_710 = 0x710, + sram_dest_reg_714 = 0x714, + net_buf_reg_718 = 0x718, + wan_ctrl_reg_71c = 0x71c, +} flexcop_ibi_register; + +#define flexcop_set_ibi_value(reg,attr,val) \ + flexcop_ibi_value v = fc->read_ibi_reg(fc,reg); \ + v.reg.attr = val; \ + fc->write_ibi_reg(fc,reg,v); \ + +#endif diff --git a/drivers/media/dvb/b2c2/flexcop-sram.c b/drivers/media/dvb/b2c2/flexcop-sram.c new file mode 100644 index 00000000000..01570ec8096 --- /dev/null +++ b/drivers/media/dvb/b2c2/flexcop-sram.c @@ -0,0 +1,403 @@ +/* + * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III + * + * flexcop-sram.c - functions for controlling the SRAM. + * + * see flexcop.c for copyright information. + */ +#include "flexcop.h" + +static void flexcop_sram_set_chip (struct flexcop_device *fc, flexcop_sram_type_t type) +{ + flexcop_set_ibi_value(wan_ctrl_reg_71c,sram_chip,type); +} + +int flexcop_sram_init(struct flexcop_device *fc) +{ + switch (fc->rev) { + case FLEXCOP_II: + case FLEXCOP_IIB: + flexcop_sram_set_chip(fc,FC_SRAM_1_32KB); + break; + case FLEXCOP_III: + flexcop_sram_set_chip(fc,FC_SRAM_1_48KB); + break; + default: + return -EINVAL; + } + return 0; +} + +int flexcop_sram_set_dest(struct flexcop_device *fc, flexcop_sram_dest_t dest, flexcop_sram_dest_target_t target) +{ + flexcop_ibi_value v; + + v = fc->read_ibi_reg(fc,sram_dest_reg_714); + + if (fc->rev != FLEXCOP_III && target == FC_SRAM_DEST_TARGET_FC3_CA) { + err("SRAM destination target to available on FlexCopII(b)\n"); + return -EINVAL; + } + + deb_sram("sram dest: %x target: %x\n",dest, target); + + if (dest & FC_SRAM_DEST_NET) + v.sram_dest_reg_714.NET_Dest = target; + if (dest & FC_SRAM_DEST_CAI) + v.sram_dest_reg_714.CAI_Dest = target; + if (dest & FC_SRAM_DEST_CAO) + v.sram_dest_reg_714.CAO_Dest = target; + if (dest & FC_SRAM_DEST_MEDIA) + v.sram_dest_reg_714.MEDIA_Dest = target; + + fc->write_ibi_reg(fc,sram_dest_reg_714,v); + udelay(1000); /* TODO delay really necessary */ + + return 0; +} +EXPORT_SYMBOL(flexcop_sram_set_dest); + +void flexcop_wan_set_speed(struct flexcop_device *fc, flexcop_wan_speed_t s) +{ + flexcop_set_ibi_value(wan_ctrl_reg_71c,wan_speed_sig,s); +} +EXPORT_SYMBOL(flexcop_wan_set_speed); + +void flexcop_sram_ctrl(struct flexcop_device *fc, int usb_wan, int sramdma, int maximumfill) +{ + flexcop_ibi_value v = fc->read_ibi_reg(fc,sram_dest_reg_714); + v.sram_dest_reg_714.ctrl_usb_wan = usb_wan; + v.sram_dest_reg_714.ctrl_sramdma = sramdma; + v.sram_dest_reg_714.ctrl_maximumfill = maximumfill; + fc->write_ibi_reg(fc,sram_dest_reg_714,v); +} +EXPORT_SYMBOL(flexcop_sram_ctrl); + +#if 0 +static void flexcop_sram_write(struct adapter *adapter, u32 bank, u32 addr, u8 *buf, u32 len) +{ + int i, retries; + u32 command; + + for (i = 0; i < len; i++) { + command = bank | addr | 0x04000000 | (*buf << 0x10); + + retries = 2; + + while (((read_reg_dw(adapter, 0x700) & 0x80000000) != 0) && (retries > 0)) { + mdelay(1); + retries--; + }; + + if (retries == 0) + printk("%s: SRAM timeout\n", __FUNCTION__); + + write_reg_dw(adapter, 0x700, command); + + buf++; + addr++; + } +} + +static void flex_sram_read(struct adapter *adapter, u32 bank, u32 addr, u8 *buf, u32 len) +{ + int i, retries; + u32 command, value; + + for (i = 0; i < len; i++) { + command = bank | addr | 0x04008000; + + retries = 10000; + + while (((read_reg_dw(adapter, 0x700) & 0x80000000) != 0) && (retries > 0)) { + mdelay(1); + retries--; + }; + + if (retries == 0) + printk("%s: SRAM timeout\n", __FUNCTION__); + + write_reg_dw(adapter, 0x700, command); + + retries = 10000; + + while (((read_reg_dw(adapter, 0x700) & 0x80000000) != 0) && (retries > 0)) { + mdelay(1); + retries--; + }; + + if (retries == 0) + printk("%s: SRAM timeout\n", __FUNCTION__); + + value = read_reg_dw(adapter, 0x700) >> 0x10; + + *buf = (value & 0xff); + + addr++; + buf++; + } +} + +static void sram_write_chunk(struct adapter *adapter, u32 addr, u8 *buf, u16 len) +{ + u32 bank; + + bank = 0; + + if (adapter->dw_sram_type == 0x20000) { + bank = (addr & 0x18000) << 0x0d; + } + + if (adapter->dw_sram_type == 0x00000) { + if ((addr >> 0x0f) == 0) + bank = 0x20000000; + else + bank = 0x10000000; + } + + flex_sram_write(adapter, bank, addr & 0x7fff, buf, len); +} + +static void sram_read_chunk(struct adapter *adapter, u32 addr, u8 *buf, u16 len) +{ + u32 bank; + + bank = 0; + + if (adapter->dw_sram_type == 0x20000) { + bank = (addr & 0x18000) << 0x0d; + } + + if (adapter->dw_sram_type == 0x00000) { + if ((addr >> 0x0f) == 0) + bank = 0x20000000; + else + bank = 0x10000000; + } + + flex_sram_read(adapter, bank, addr & 0x7fff, buf, len); +} + +static void sram_read(struct adapter *adapter, u32 addr, u8 *buf, u32 len) +{ + u32 length; + + while (len != 0) { + length = len; + + // check if the address range belongs to the same + // 32K memory chip. If not, the data is read from + // one chip at a time. + if ((addr >> 0x0f) != ((addr + len - 1) >> 0x0f)) { + length = (((addr >> 0x0f) + 1) << 0x0f) - addr; + } + + sram_read_chunk(adapter, addr, buf, length); + + addr = addr + length; + buf = buf + length; + len = len - length; + } +} + +static void sram_write(struct adapter *adapter, u32 addr, u8 *buf, u32 len) +{ + u32 length; + + while (len != 0) { + length = len; + + // check if the address range belongs to the same + // 32K memory chip. If not, the data is written to + // one chip at a time. + if ((addr >> 0x0f) != ((addr + len - 1) >> 0x0f)) { + length = (((addr >> 0x0f) + 1) << 0x0f) - addr; + } + + sram_write_chunk(adapter, addr, buf, length); + + addr = addr + length; + buf = buf + length; + len = len - length; + } +} + +static void sram_set_size(struct adapter *adapter, u32 mask) +{ + write_reg_dw(adapter, 0x71c, (mask | (~0x30000 & read_reg_dw(adapter, 0x71c)))); +} + +static void sram_init(struct adapter *adapter) +{ + u32 tmp; + + tmp = read_reg_dw(adapter, 0x71c); + + write_reg_dw(adapter, 0x71c, 1); + + if (read_reg_dw(adapter, 0x71c) != 0) { + write_reg_dw(adapter, 0x71c, tmp); + + adapter->dw_sram_type = tmp & 0x30000; + + ddprintk("%s: dw_sram_type = %x\n", __FUNCTION__, adapter->dw_sram_type); + + } else { + + adapter->dw_sram_type = 0x10000; + + ddprintk("%s: dw_sram_type = %x\n", __FUNCTION__, adapter->dw_sram_type); + } + + /* return value is never used? */ +/* return adapter->dw_sram_type; */ +} + +static int sram_test_location(struct adapter *adapter, u32 mask, u32 addr) +{ + u8 tmp1, tmp2; + + dprintk("%s: mask = %x, addr = %x\n", __FUNCTION__, mask, addr); + + sram_set_size(adapter, mask); + sram_init(adapter); + + tmp2 = 0xa5; + tmp1 = 0x4f; + + sram_write(adapter, addr, &tmp2, 1); + sram_write(adapter, addr + 4, &tmp1, 1); + + tmp2 = 0; + + mdelay(20); + + sram_read(adapter, addr, &tmp2, 1); + sram_read(adapter, addr, &tmp2, 1); + + dprintk("%s: wrote 0xa5, read 0x%2x\n", __FUNCTION__, tmp2); + + if (tmp2 != 0xa5) + return 0; + + tmp2 = 0x5a; + tmp1 = 0xf4; + + sram_write(adapter, addr, &tmp2, 1); + sram_write(adapter, addr + 4, &tmp1, 1); + + tmp2 = 0; + + mdelay(20); + + sram_read(adapter, addr, &tmp2, 1); + sram_read(adapter, addr, &tmp2, 1); + + dprintk("%s: wrote 0x5a, read 0x%2x\n", __FUNCTION__, tmp2); + + if (tmp2 != 0x5a) + return 0; + + return 1; +} + +static u32 sram_length(struct adapter *adapter) +{ + if (adapter->dw_sram_type == 0x10000) + return 32768; // 32K + if (adapter->dw_sram_type == 0x00000) + return 65536; // 64K + if (adapter->dw_sram_type == 0x20000) + return 131072; // 128K + + return 32768; // 32K +} + +/* FlexcopII can work with 32K, 64K or 128K of external SRAM memory. + - for 128K there are 4x32K chips at bank 0,1,2,3. + - for 64K there are 2x32K chips at bank 1,2. + - for 32K there is one 32K chip at bank 0. + + FlexCop works only with one bank at a time. The bank is selected + by bits 28-29 of the 0x700 register. + + bank 0 covers addresses 0x00000-0x07fff + bank 1 covers addresses 0x08000-0x0ffff + bank 2 covers addresses 0x10000-0x17fff + bank 3 covers addresses 0x18000-0x1ffff +*/ + +static int flexcop_sram_detect(struct flexcop_device *fc) +{ + flexcop_ibi_value r208,r71c_0,vr71c_1; + + r208 = fc->read_ibi_reg(fc, ctrl_208); + fc->write_ibi_reg(fc, ctrl_208, ibi_zero); + + r71c_0 = fc->read_ibi_reg(fc, wan_ctrl_reg_71c); + + write_reg_dw(adapter, 0x71c, 1); + + tmp3 = read_reg_dw(adapter, 0x71c); + + dprintk("%s: tmp3 = %x\n", __FUNCTION__, tmp3); + + write_reg_dw(adapter, 0x71c, tmp2); + + // check for internal SRAM ??? + tmp3--; + if (tmp3 != 0) { + sram_set_size(adapter, 0x10000); + sram_init(adapter); + write_reg_dw(adapter, 0x208, tmp); + + dprintk("%s: sram size = 32K\n", __FUNCTION__); + + return 32; + } + + if (sram_test_location(adapter, 0x20000, 0x18000) != 0) { + sram_set_size(adapter, 0x20000); + sram_init(adapter); + write_reg_dw(adapter, 0x208, tmp); + + dprintk("%s: sram size = 128K\n", __FUNCTION__); + + return 128; + } + + if (sram_test_location(adapter, 0x00000, 0x10000) != 0) { + sram_set_size(adapter, 0x00000); + sram_init(adapter); + write_reg_dw(adapter, 0x208, tmp); + + dprintk("%s: sram size = 64K\n", __FUNCTION__); + + return 64; + } + + if (sram_test_location(adapter, 0x10000, 0x00000) != 0) { + sram_set_size(adapter, 0x10000); + sram_init(adapter); + write_reg_dw(adapter, 0x208, tmp); + + dprintk("%s: sram size = 32K\n", __FUNCTION__); + + return 32; + } + + sram_set_size(adapter, 0x10000); + sram_init(adapter); + write_reg_dw(adapter, 0x208, tmp); + + dprintk("%s: SRAM detection failed. Set to 32K \n", __FUNCTION__); + + return 0; +} + +static void sll_detect_sram_size(struct adapter *adapter) +{ + sram_detect_for_flex2(adapter); +} + +#endif diff --git a/drivers/media/dvb/b2c2/flexcop-usb.c b/drivers/media/dvb/b2c2/flexcop-usb.c new file mode 100644 index 00000000000..5fa68febf3a --- /dev/null +++ b/drivers/media/dvb/b2c2/flexcop-usb.c @@ -0,0 +1,530 @@ +/* + * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III + * + * flexcop-usb.c - covers the USB part. + * + * see flexcop.c for copyright information. + */ + +#define FC_LOG_PREFIX "flexcop_usb" +#include "flexcop-usb.h" +#include "flexcop-common.h" + +/* Version information */ +#define DRIVER_VERSION "0.1" +#define DRIVER_NAME "Technisat/B2C2 FlexCop II/IIb/III Digital TV USB Driver" +#define DRIVER_AUTHOR "Patrick Boettcher <patrick.boettcher@desy.de>" + +/* debug */ +#ifdef CONFIG_DVB_B2C2_FLEXCOP_DEBUG +#define dprintk(level,args...) \ + do { if ((debug & level)) { printk(args); } } while (0) +#define debug_dump(b,l,method) {\ + int i; \ + for (i = 0; i < l; i++) method("%02x ", b[i]); \ + method("\n");\ +} + +#define DEBSTATUS "" +#else +#define dprintk(level,args...) +#define debug_dump(b,l,method) +#define DEBSTATUS " (debugging is not enabled)" +#endif + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level (1=info,ts=2,ctrl=4,i2c=8,v8mem=16 (or-able))." DEBSTATUS); +#undef DEBSTATUS + +#define deb_info(args...) dprintk(0x01,args) +#define deb_ts(args...) dprintk(0x02,args) +#define deb_ctrl(args...) dprintk(0x04,args) +#define deb_i2c(args...) dprintk(0x08,args) +#define deb_v8(args...) dprintk(0x10,args) + +/* JLP 111700: we will include the 1 bit gap between the upper and lower 3 bits + * in the IBI address, to make the V8 code simpler. + * PCI ADDRESS FORMAT: 0x71C -> 0000 0111 0001 1100 (these are the six bits used) + * in general: 0000 0HHH 000L LL00 + * IBI ADDRESS FORMAT: RHHH BLLL + * + * where R is the read(1)/write(0) bit, B is the busy bit + * and HHH and LLL are the two sets of three bits from the PCI address. + */ +#define B2C2_FLEX_PCIOFFSET_TO_INTERNALADDR(usPCI) (u8) (((usPCI >> 2) & 0x07) + ((usPCI >> 4) & 0x70)) +#define B2C2_FLEX_INTERNALADDR_TO_PCIOFFSET(ucAddr) (u16) (((ucAddr & 0x07) << 2) + ((ucAddr & 0x70) << 4)) + +/* + * DKT 020228 + * - forget about this VENDOR_BUFFER_SIZE, read and write register + * deal with DWORD or 4 bytes, that should be should from now on + * - from now on, we don't support anything older than firm 1.00 + * I eliminated the write register as a 2 trip of writing hi word and lo word + * and force this to write only 4 bytes at a time. + * NOTE: this should work with all the firmware from 1.00 and newer + */ +static int flexcop_usb_readwrite_dw(struct flexcop_device *fc, u16 wRegOffsPCI, u32 *val, u8 read) +{ + struct flexcop_usb *fc_usb = fc->bus_specific; + u8 request = read ? B2C2_USB_READ_REG : B2C2_USB_WRITE_REG; + u8 request_type = (read ? USB_DIR_IN : USB_DIR_OUT) | USB_TYPE_VENDOR; + u8 wAddress = B2C2_FLEX_PCIOFFSET_TO_INTERNALADDR(wRegOffsPCI) | (read ? 0x80 : 0); + + int len = usb_control_msg(fc_usb->udev, + read ? B2C2_USB_CTRL_PIPE_IN : B2C2_USB_CTRL_PIPE_OUT, + request, + request_type, /* 0xc0 read or 0x40 write*/ + wAddress, + 0, + val, + sizeof(u32), + B2C2_WAIT_FOR_OPERATION_RDW * HZ); + + if (len != sizeof(u32)) { + err("error while %s dword from %d (%d).",read ? "reading" : "writing", + wAddress,wRegOffsPCI); + return -EIO; + } + return 0; +} + +/* + * DKT 010817 - add support for V8 memory read/write and flash update + */ +static int flexcop_usb_v8_memory_req(struct flexcop_usb *fc_usb, + flexcop_usb_request_t req, u8 page, u16 wAddress, + u8 *pbBuffer,u32 buflen) +{ +// u8 dwRequestType; + u8 request_type = USB_TYPE_VENDOR; + u16 wIndex; + int nWaitTime,pipe,len; + + wIndex = page << 8; + + switch (req) { + case B2C2_USB_READ_V8_MEM: + nWaitTime = B2C2_WAIT_FOR_OPERATION_V8READ; + request_type |= USB_DIR_IN; +// dwRequestType = (u8) RTYPE_READ_V8_MEMORY; + pipe = B2C2_USB_CTRL_PIPE_IN; + break; + case B2C2_USB_WRITE_V8_MEM: + wIndex |= pbBuffer[0]; + request_type |= USB_DIR_OUT; + nWaitTime = B2C2_WAIT_FOR_OPERATION_V8WRITE; +// dwRequestType = (u8) RTYPE_WRITE_V8_MEMORY; + pipe = B2C2_USB_CTRL_PIPE_OUT; + break; + case B2C2_USB_FLASH_BLOCK: + request_type |= USB_DIR_OUT; + nWaitTime = B2C2_WAIT_FOR_OPERATION_V8FLASH; +// dwRequestType = (u8) RTYPE_WRITE_V8_FLASH; + pipe = B2C2_USB_CTRL_PIPE_OUT; + break; + default: + deb_info("unsupported request for v8_mem_req %x.\n",req); + return -EINVAL; + } + deb_v8("v8mem: %02x %02x %04x %04x, len: %d\n",request_type,req, + wAddress,wIndex,buflen); + + len = usb_control_msg(fc_usb->udev,pipe, + req, + request_type, + wAddress, + wIndex, + pbBuffer, + buflen, + nWaitTime * HZ); + + debug_dump(pbBuffer,len,deb_v8); + + return len == buflen ? 0 : -EIO; +} + +#define bytes_left_to_read_on_page(paddr,buflen) \ + ((V8_MEMORY_PAGE_SIZE - (paddr & V8_MEMORY_PAGE_MASK)) > buflen \ + ? buflen : (V8_MEMORY_PAGE_SIZE - (paddr & V8_MEMORY_PAGE_MASK))) + +static int flexcop_usb_memory_req(struct flexcop_usb *fc_usb,flexcop_usb_request_t req, + flexcop_usb_mem_page_t page_start, u32 addr, int extended, u8 *buf, u32 len) +{ + int i,ret = 0; + u16 wMax; + u32 pagechunk = 0; + + switch(req) { + case B2C2_USB_READ_V8_MEM: wMax = USB_MEM_READ_MAX; break; + case B2C2_USB_WRITE_V8_MEM: wMax = USB_MEM_WRITE_MAX; break; + case B2C2_USB_FLASH_BLOCK: wMax = USB_FLASH_MAX; break; + default: + return -EINVAL; + break; + } + for (i = 0; i < len;) { + pagechunk = wMax < bytes_left_to_read_on_page(addr,len) ? wMax : bytes_left_to_read_on_page(addr,len); + deb_info("%x\n",(addr & V8_MEMORY_PAGE_MASK) | (V8_MEMORY_EXTENDED*extended)); + if ((ret = flexcop_usb_v8_memory_req(fc_usb,req, + page_start + (addr / V8_MEMORY_PAGE_SIZE), /* actual page */ + (addr & V8_MEMORY_PAGE_MASK) | (V8_MEMORY_EXTENDED*extended), + &buf[i],pagechunk)) < 0) + return ret; + + addr += pagechunk; + len -= pagechunk; + } + return 0; +} + +static int flexcop_usb_get_mac_addr(struct flexcop_device *fc, int extended) +{ + return flexcop_usb_memory_req(fc->bus_specific,B2C2_USB_READ_V8_MEM,V8_MEMORY_PAGE_FLASH,0x1f010,1,fc->mac_address,6); +} + +#if 0 +static int flexcop_usb_utility_req(struct flexcop_usb *fc_usb, int set, + flexcop_usb_utility_function_t func, u8 extra, u16 wIndex, + u16 buflen, u8 *pvBuffer) +{ + u16 wValue; + u8 request_type = (set ? USB_DIR_OUT : USB_DIR_IN) | USB_TYPE_VENDOR; +// u8 dwRequestType = (u8) RTYPE_GENERIC, + int nWaitTime = 2, + pipe = set ? B2C2_USB_CTRL_PIPE_OUT : B2C2_USB_CTRL_PIPE_IN, + len; + + wValue = (func << 8) | extra; + + len = usb_control_msg(fc_usb->udev,pipe, + B2C2_USB_UTILITY, + request_type, + wValue, + wIndex, + pvBuffer, + buflen, + nWaitTime * HZ); + return len == buflen ? 0 : -EIO; +} +#endif + +/* usb i2c stuff */ +static int flexcop_usb_i2c_req(struct flexcop_usb *fc_usb, + flexcop_usb_request_t req, flexcop_usb_i2c_function_t func, + flexcop_i2c_port_t port, u8 chipaddr, u8 addr, u8 *buf, u8 buflen) +{ + u16 wValue, wIndex; + int nWaitTime,pipe,len; +// u8 dwRequestType; + u8 request_type = USB_TYPE_VENDOR; + + switch (func) { + case USB_FUNC_I2C_WRITE: + case USB_FUNC_I2C_MULTIWRITE: + case USB_FUNC_I2C_REPEATWRITE: + /* DKT 020208 - add this to support special case of DiSEqC */ + case USB_FUNC_I2C_CHECKWRITE: + pipe = B2C2_USB_CTRL_PIPE_OUT; + nWaitTime = 2; +// dwRequestType = (u8) RTYPE_GENERIC; + request_type |= USB_DIR_OUT; + break; + case USB_FUNC_I2C_READ: + case USB_FUNC_I2C_REPEATREAD: + pipe = B2C2_USB_CTRL_PIPE_IN; + nWaitTime = 2; +// dwRequestType = (u8) RTYPE_GENERIC; + request_type |= USB_DIR_IN; + break; + default: + deb_info("unsupported function for i2c_req %x\n",func); + return -EINVAL; + } + wValue = (func << 8 ) | (port << 4); + wIndex = (chipaddr << 8 ) | addr; + + deb_i2c("i2c %2d: %02x %02x %02x %02x %02x %02x\n",func,request_type,req, + ((wValue && 0xff) << 8),wValue >> 8,((wIndex && 0xff) << 8),wIndex >> 8); + + len = usb_control_msg(fc_usb->udev,pipe, + req, + request_type, + wValue, + wIndex, + buf, + buflen, + nWaitTime * HZ); + + return len == buflen ? 0 : -EREMOTEIO; +} + +/* actual bus specific access functions, make sure prototype are/will be equal to pci */ +static flexcop_ibi_value flexcop_usb_read_ibi_reg(struct flexcop_device *fc, flexcop_ibi_register reg) +{ + flexcop_ibi_value val; + val.raw = 0; + flexcop_usb_readwrite_dw(fc,reg, &val.raw, 1); + return val; +} + +static int flexcop_usb_write_ibi_reg(struct flexcop_device *fc, flexcop_ibi_register reg, flexcop_ibi_value val) +{ + return flexcop_usb_readwrite_dw(fc,reg, &val.raw, 0); +} + +static int flexcop_usb_i2c_request(struct flexcop_device *fc, flexcop_access_op_t op, + flexcop_i2c_port_t port, u8 chipaddr, u8 addr, u8 *buf, u16 len) +{ + if (op == FC_READ) + return flexcop_usb_i2c_req(fc->bus_specific,B2C2_USB_I2C_REQUEST,USB_FUNC_I2C_READ,port,chipaddr,addr,buf,len); + else + return flexcop_usb_i2c_req(fc->bus_specific,B2C2_USB_I2C_REQUEST,USB_FUNC_I2C_WRITE,port,chipaddr,addr,buf,len); +} + +static void flexcop_usb_urb_complete(struct urb *urb, struct pt_regs *ptregs) +{ + struct flexcop_usb *fc_usb = urb->context; + int i; + + if (urb->actual_length > 0) + deb_ts("urb completed, bufsize: %d actlen; %d\n",urb->transfer_buffer_length, urb->actual_length); + + for (i = 0; i < urb->number_of_packets; i++) { + if (urb->iso_frame_desc[i].status < 0) { + err("iso frame descriptor %d has an error: %d\n",i,urb->iso_frame_desc[i].status); + } else + if (urb->iso_frame_desc[i].actual_length > 0) { + deb_ts("passed %d bytes to the demux\n",urb->iso_frame_desc[i].actual_length); + + flexcop_pass_dmx_data(fc_usb->fc_dev, + urb->transfer_buffer + urb->iso_frame_desc[i].offset, + urb->iso_frame_desc[i].actual_length); + } + urb->iso_frame_desc[i].status = 0; + urb->iso_frame_desc[i].actual_length = 0; + } + + usb_submit_urb(urb,GFP_ATOMIC); +} + +static int flexcop_usb_stream_control(struct flexcop_device *fc, int onoff) +{ + /* submit/kill iso packets */ + return 0; +} + +static void flexcop_usb_transfer_exit(struct flexcop_usb *fc_usb) +{ + int i; + for (i = 0; i < B2C2_USB_NUM_ISO_URB; i++) + if (fc_usb->iso_urb[i] != NULL) { + deb_ts("unlinking/killing urb no. %d\n",i); + usb_kill_urb(fc_usb->iso_urb[i]); + usb_free_urb(fc_usb->iso_urb[i]); + } + + if (fc_usb->iso_buffer != NULL) + pci_free_consistent(NULL,fc_usb->buffer_size, fc_usb->iso_buffer, fc_usb->dma_addr); +} + +static int flexcop_usb_transfer_init(struct flexcop_usb *fc_usb) +{ + u16 frame_size = fc_usb->uintf->cur_altsetting->endpoint[0].desc.wMaxPacketSize; + int bufsize = B2C2_USB_NUM_ISO_URB * B2C2_USB_FRAMES_PER_ISO * frame_size,i,j,ret; + int buffer_offset = 0; + + deb_ts("creating %d iso-urbs with %d frames each of %d bytes size = %d.\n", + B2C2_USB_NUM_ISO_URB, B2C2_USB_FRAMES_PER_ISO, frame_size,bufsize); + + fc_usb->iso_buffer = pci_alloc_consistent(NULL,bufsize,&fc_usb->dma_addr); + if (fc_usb->iso_buffer == NULL) + return -ENOMEM; + memset(fc_usb->iso_buffer, 0, bufsize); + fc_usb->buffer_size = bufsize; + + /* creating iso urbs */ + for (i = 0; i < B2C2_USB_NUM_ISO_URB; i++) + if (!(fc_usb->iso_urb[i] = usb_alloc_urb(B2C2_USB_FRAMES_PER_ISO,GFP_ATOMIC))) { + ret = -ENOMEM; + goto urb_error; + } + /* initialising and submitting iso urbs */ + for (i = 0; i < B2C2_USB_NUM_ISO_URB; i++) { + int frame_offset = 0; + struct urb *urb = fc_usb->iso_urb[i]; + deb_ts("initializing and submitting urb no. %d (buf_offset: %d).\n",i,buffer_offset); + + urb->dev = fc_usb->udev; + urb->context = fc_usb; + urb->complete = flexcop_usb_urb_complete; + urb->pipe = B2C2_USB_DATA_PIPE; + urb->transfer_flags = URB_ISO_ASAP; + urb->interval = 1; + urb->number_of_packets = B2C2_USB_FRAMES_PER_ISO; + urb->transfer_buffer_length = frame_size * B2C2_USB_FRAMES_PER_ISO; + urb->transfer_buffer = fc_usb->iso_buffer + buffer_offset; + + buffer_offset += frame_size * B2C2_USB_FRAMES_PER_ISO; + for (j = 0; j < B2C2_USB_FRAMES_PER_ISO; j++) { + deb_ts("urb no: %d, frame: %d, frame_offset: %d\n",i,j,frame_offset); + urb->iso_frame_desc[j].offset = frame_offset; + urb->iso_frame_desc[j].length = frame_size; + frame_offset += frame_size; + } + + if ((ret = usb_submit_urb(fc_usb->iso_urb[i],GFP_ATOMIC))) { + err("submitting urb %d failed with %d.",i,ret); + goto urb_error; + } + deb_ts("submitted urb no. %d.\n",i); + } + +/* SRAM */ + + flexcop_sram_set_dest(fc_usb->fc_dev,FC_SRAM_DEST_MEDIA | FC_SRAM_DEST_NET | + FC_SRAM_DEST_CAO | FC_SRAM_DEST_CAI, FC_SRAM_DEST_TARGET_WAN_USB); + flexcop_wan_set_speed(fc_usb->fc_dev,FC_WAN_SPEED_8MBITS); + flexcop_sram_ctrl(fc_usb->fc_dev,1,1,1); + + ret = 0; + goto success; +urb_error: + flexcop_usb_transfer_exit(fc_usb); +success: + return ret; +} + +static int flexcop_usb_init(struct flexcop_usb *fc_usb) +{ + /* use the alternate setting with the larges buffer */ + usb_set_interface(fc_usb->udev,0,1); + switch (fc_usb->udev->speed) { + case USB_SPEED_LOW: + err("cannot handle USB speed because it is to sLOW."); + return -ENODEV; + break; + case USB_SPEED_FULL: + info("running at FULL speed."); + break; + case USB_SPEED_HIGH: + info("running at HIGH speed."); + break; + case USB_SPEED_UNKNOWN: /* fall through */ + default: + err("cannot handle USB speed because it is unkown."); + return -ENODEV; + } + usb_set_intfdata(fc_usb->uintf, fc_usb); + return 0; +} + +static void flexcop_usb_exit(struct flexcop_usb *fc_usb) +{ + usb_set_intfdata(fc_usb->uintf, NULL); +} + +static int flexcop_usb_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct usb_device *udev = interface_to_usbdev(intf); + struct flexcop_usb *fc_usb = NULL; + struct flexcop_device *fc = NULL; + int ret; + + if ((fc = flexcop_device_kmalloc(sizeof(struct flexcop_usb))) == NULL) { + err("out of memory\n"); + return -ENOMEM; + } + +/* general flexcop init */ + fc_usb = fc->bus_specific; + fc_usb->fc_dev = fc; + + fc->read_ibi_reg = flexcop_usb_read_ibi_reg; + fc->write_ibi_reg = flexcop_usb_write_ibi_reg; + fc->i2c_request = flexcop_usb_i2c_request; + fc->get_mac_addr = flexcop_usb_get_mac_addr; + + fc->stream_control = flexcop_usb_stream_control; + + fc->pid_filtering = 1; + fc->bus_type = FC_USB; + + fc->dev = &udev->dev; + +/* bus specific part */ + fc_usb->udev = udev; + fc_usb->uintf = intf; + if ((ret = flexcop_usb_init(fc_usb)) != 0) + goto err_kfree; + +/* init flexcop */ + if ((ret = flexcop_device_initialize(fc)) != 0) + goto err_usb_exit; + +/* xfer init */ + if ((ret = flexcop_usb_transfer_init(fc_usb)) != 0) + goto err_fc_exit; + + info("%s successfully initialized and connected.",DRIVER_NAME); + ret = 0; + goto success; +err_fc_exit: + flexcop_device_exit(fc); +err_usb_exit: + flexcop_usb_exit(fc_usb); +err_kfree: + flexcop_device_kfree(fc); +success: + return ret; +} + +static void flexcop_usb_disconnect(struct usb_interface *intf) +{ + struct flexcop_usb *fc_usb = usb_get_intfdata(intf); + flexcop_usb_transfer_exit(fc_usb); + flexcop_device_exit(fc_usb->fc_dev); + flexcop_usb_exit(fc_usb); + flexcop_device_kfree(fc_usb->fc_dev); + info("%s successfully deinitialized and disconnected.",DRIVER_NAME); +} + +static struct usb_device_id flexcop_usb_table [] = { + { USB_DEVICE(0x0af7, 0x0101) }, + { } +}; + +/* usb specific object needed to register this driver with the usb subsystem */ +static struct usb_driver flexcop_usb_driver = { + .owner = THIS_MODULE, + .name = "Technisat/B2C2 FlexCop II/IIb/III USB", + .probe = flexcop_usb_probe, + .disconnect = flexcop_usb_disconnect, + .id_table = flexcop_usb_table, +}; + +/* module stuff */ +static int __init flexcop_usb_module_init(void) +{ + int result; + if ((result = usb_register(&flexcop_usb_driver))) { + err("usb_register failed. (%d)",result); + return result; + } + + return 0; +} + +static void __exit flexcop_usb_module_exit(void) +{ + /* deregister this driver from the USB subsystem */ + usb_deregister(&flexcop_usb_driver); +} + +module_init(flexcop_usb_module_init); +module_exit(flexcop_usb_module_exit); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_NAME); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/b2c2/flexcop-usb.h b/drivers/media/dvb/b2c2/flexcop-usb.h new file mode 100644 index 00000000000..bfcec25ff2d --- /dev/null +++ b/drivers/media/dvb/b2c2/flexcop-usb.h @@ -0,0 +1,116 @@ +#ifndef __FLEXCOP_USB_H_INCLUDED__ +#define __FLEXCOP_USB_H_INCLUDED__ + +#include <linux/usb.h> + +/* transfer parameters */ +#define B2C2_USB_FRAMES_PER_ISO 4 +#define B2C2_USB_NUM_ISO_URB 4 + +#define B2C2_USB_CTRL_PIPE_IN usb_rcvctrlpipe(fc_usb->udev,0) +#define B2C2_USB_CTRL_PIPE_OUT usb_sndctrlpipe(fc_usb->udev,0) +#define B2C2_USB_DATA_PIPE usb_rcvisocpipe(fc_usb->udev,0x81) + +struct flexcop_usb { + struct usb_device *udev; + struct usb_interface *uintf; + + u8 *iso_buffer; + int buffer_size; + dma_addr_t dma_addr; + struct urb *iso_urb[B2C2_USB_NUM_ISO_URB]; + + struct flexcop_device *fc_dev; +}; + +#if 0 +/* request types TODO What is its use?*/ +typedef enum { + +/* something is wrong with this part + RTYPE_READ_DW = (1 << 6), + RTYPE_WRITE_DW_1 = (3 << 6), + RTYPE_READ_V8_MEMORY = (6 << 6), + RTYPE_WRITE_V8_MEMORY = (7 << 6), + RTYPE_WRITE_V8_FLASH = (8 << 6), + RTYPE_GENERIC = (9 << 6), +*/ +} flexcop_usb_request_type_t; +#endif + +/* request */ +typedef enum { + B2C2_USB_WRITE_V8_MEM = 0x04, + B2C2_USB_READ_V8_MEM = 0x05, + B2C2_USB_READ_REG = 0x08, + B2C2_USB_WRITE_REG = 0x0A, +/* B2C2_USB_WRITEREGLO = 0x0A, */ + B2C2_USB_WRITEREGHI = 0x0B, + B2C2_USB_FLASH_BLOCK = 0x10, + B2C2_USB_I2C_REQUEST = 0x11, + B2C2_USB_UTILITY = 0x12, +} flexcop_usb_request_t; + +/* function definition for I2C_REQUEST */ +typedef enum { + USB_FUNC_I2C_WRITE = 0x01, + USB_FUNC_I2C_MULTIWRITE = 0x02, + USB_FUNC_I2C_READ = 0x03, + USB_FUNC_I2C_REPEATWRITE = 0x04, + USB_FUNC_GET_DESCRIPTOR = 0x05, + USB_FUNC_I2C_REPEATREAD = 0x06, +/* DKT 020208 - add this to support special case of DiSEqC */ + USB_FUNC_I2C_CHECKWRITE = 0x07, + USB_FUNC_I2C_CHECKRESULT = 0x08, +} flexcop_usb_i2c_function_t; + +/* + * function definition for UTILITY request 0x12 + * DKT 020304 - new utility function + */ +typedef enum { + UTILITY_SET_FILTER = 0x01, + UTILITY_DATA_ENABLE = 0x02, + UTILITY_FLEX_MULTIWRITE = 0x03, + UTILITY_SET_BUFFER_SIZE = 0x04, + UTILITY_FLEX_OPERATOR = 0x05, + UTILITY_FLEX_RESET300_START = 0x06, + UTILITY_FLEX_RESET300_STOP = 0x07, + UTILITY_FLEX_RESET300 = 0x08, + UTILITY_SET_ISO_SIZE = 0x09, + UTILITY_DATA_RESET = 0x0A, + UTILITY_GET_DATA_STATUS = 0x10, + UTILITY_GET_V8_REG = 0x11, +/* DKT 020326 - add function for v1.14 */ + UTILITY_SRAM_WRITE = 0x12, + UTILITY_SRAM_READ = 0x13, + UTILITY_SRAM_TESTFILL = 0x14, + UTILITY_SRAM_TESTSET = 0x15, + UTILITY_SRAM_TESTVERIFY = 0x16, +} flexcop_usb_utility_function_t; + +#define B2C2_WAIT_FOR_OPERATION_RW 1*HZ /* 1 s */ +#define B2C2_WAIT_FOR_OPERATION_RDW 3*HZ /* 3 s */ +#define B2C2_WAIT_FOR_OPERATION_WDW 1*HZ /* 1 s */ + +#define B2C2_WAIT_FOR_OPERATION_V8READ 3*HZ /* 3 s */ +#define B2C2_WAIT_FOR_OPERATION_V8WRITE 3*HZ /* 3 s */ +#define B2C2_WAIT_FOR_OPERATION_V8FLASH 3*HZ /* 3 s */ + +typedef enum { + V8_MEMORY_PAGE_DVB_CI = 0x20, + V8_MEMORY_PAGE_DVB_DS = 0x40, + V8_MEMORY_PAGE_MULTI2 = 0x60, + V8_MEMORY_PAGE_FLASH = 0x80 +} flexcop_usb_mem_page_t; + +#define V8_MEMORY_EXTENDED (1 << 15) + +#define USB_MEM_READ_MAX 32 +#define USB_MEM_WRITE_MAX 1 +#define USB_FLASH_MAX 8 + +#define V8_MEMORY_PAGE_SIZE 0x8000 // 32K +#define V8_MEMORY_PAGE_MASK 0x7FFF + +#endif diff --git a/drivers/media/dvb/b2c2/flexcop.c b/drivers/media/dvb/b2c2/flexcop.c new file mode 100644 index 00000000000..1998267207f --- /dev/null +++ b/drivers/media/dvb/b2c2/flexcop.c @@ -0,0 +1,288 @@ +/* + * flexcop.c - driver for digital TV devices equipped with B2C2 FlexcopII(b)/III + * + * Copyright (C) 2004-5 Patrick Boettcher <patrick.boettcher@desy.de> + * + * based on the skystar2-driver + * Copyright (C) 2003 Vadim Catana, skystar@moldova.cc + * + * Acknowledgements: + * John Jurrius from BBTI, Inc. for extensive support with + * code examples and data books + * + * Bjarne Steinsbo, bjarne at steinsbo.com (some ideas for rewriting) + * + * Contributions to the skystar2-driver have been done by + * Vincenzo Di Massa, hawk.it at tiscalinet.it (several DiSEqC fixes) + * Roberto Ragusa, r.ragusa at libero.it (polishing, restyling the code) + * Niklas Peinecke, peinecke at gdv.uni-hannover.de (hardware pid/mac filtering) + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public License + * as published by the Free Software Foundation; either version 2.1 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#include "flexcop.h" + +#define DRIVER_NAME "B2C2 FlexcopII/II(b)/III digital TV receiver chip" +#define DRIVER_AUTHOR "Patrick Boettcher <patrick.boettcher@desy.de" + +#ifdef CONFIG_DVB_B2C2_FLEXCOP_DEBUG +#define DEBSTATUS "" +#else +#define DEBSTATUS " (debugging is not enabled)" +#endif + +int b2c2_flexcop_debug; +module_param_named(debug, b2c2_flexcop_debug, int, 0644); +MODULE_PARM_DESC(debug, "set debug level (1=info,2=tuner,4=i2c,8=ts,16=sram (|-able))." DEBSTATUS); +#undef DEBSTATUS + +/* global zero for ibi values */ +flexcop_ibi_value ibi_zero; + +static int flexcop_dvb_start_feed(struct dvb_demux_feed *dvbdmxfeed) +{ + struct flexcop_device *fc = dvbdmxfeed->demux->priv; + return flexcop_pid_feed_control(fc,dvbdmxfeed,1); +} + +static int flexcop_dvb_stop_feed(struct dvb_demux_feed *dvbdmxfeed) +{ + struct flexcop_device *fc = dvbdmxfeed->demux->priv; + return flexcop_pid_feed_control(fc,dvbdmxfeed,0); +} + +static int flexcop_dvb_init(struct flexcop_device *fc) +{ + int ret; + if ((ret = dvb_register_adapter(&fc->dvb_adapter,"FlexCop Digital TV device",THIS_MODULE)) < 0) { + err("error registering DVB adapter"); + return ret; + } + fc->dvb_adapter.priv = fc; + + fc->demux.dmx.capabilities = (DMX_TS_FILTERING | DMX_SECTION_FILTERING | DMX_MEMORY_BASED_FILTERING); + fc->demux.priv = fc; + + fc->demux.filternum = fc->demux.feednum = FC_MAX_FEED; + + fc->demux.start_feed = flexcop_dvb_start_feed; + fc->demux.stop_feed = flexcop_dvb_stop_feed; + fc->demux.write_to_decoder = NULL; + + if ((ret = dvb_dmx_init(&fc->demux)) < 0) { + err("dvb_dmx failed: error %d",ret); + goto err_dmx; + } + + fc->hw_frontend.source = DMX_FRONTEND_0; + + fc->dmxdev.filternum = fc->demux.feednum; + fc->dmxdev.demux = &fc->demux.dmx; + fc->dmxdev.capabilities = 0; + if ((ret = dvb_dmxdev_init(&fc->dmxdev, &fc->dvb_adapter)) < 0) { + err("dvb_dmxdev_init failed: error %d",ret); + goto err_dmx_dev; + } + + if ((ret = fc->demux.dmx.add_frontend(&fc->demux.dmx, &fc->hw_frontend)) < 0) { + err("adding hw_frontend to dmx failed: error %d",ret); + goto err_dmx_add_hw_frontend; + } + + fc->mem_frontend.source = DMX_MEMORY_FE; + if ((ret = fc->demux.dmx.add_frontend(&fc->demux.dmx, &fc->mem_frontend)) < 0) { + err("adding mem_frontend to dmx failed: error %d",ret); + goto err_dmx_add_mem_frontend; + } + + if ((ret = fc->demux.dmx.connect_frontend(&fc->demux.dmx, &fc->hw_frontend)) < 0) { + err("connect frontend failed: error %d",ret); + goto err_connect_frontend; + } + + dvb_net_init(&fc->dvb_adapter, &fc->dvbnet, &fc->demux.dmx); + + fc->init_state |= FC_STATE_DVB_INIT; + goto success; + +err_connect_frontend: + fc->demux.dmx.remove_frontend(&fc->demux.dmx,&fc->mem_frontend); +err_dmx_add_mem_frontend: + fc->demux.dmx.remove_frontend(&fc->demux.dmx,&fc->hw_frontend); +err_dmx_add_hw_frontend: + dvb_dmxdev_release(&fc->dmxdev); +err_dmx_dev: + dvb_dmx_release(&fc->demux); +err_dmx: + dvb_unregister_adapter(&fc->dvb_adapter); + return ret; + +success: + return 0; +} + +static void flexcop_dvb_exit(struct flexcop_device *fc) +{ + if (fc->init_state & FC_STATE_DVB_INIT) { + dvb_net_release(&fc->dvbnet); + + fc->demux.dmx.close(&fc->demux.dmx); + fc->demux.dmx.remove_frontend(&fc->demux.dmx,&fc->mem_frontend); + fc->demux.dmx.remove_frontend(&fc->demux.dmx,&fc->hw_frontend); + dvb_dmxdev_release(&fc->dmxdev); + dvb_dmx_release(&fc->demux); + dvb_unregister_adapter(&fc->dvb_adapter); + + deb_info("deinitialized dvb stuff\n"); + } + fc->init_state &= ~FC_STATE_DVB_INIT; +} + +/* these methods are necessary to achieve the long-term-goal of hiding the + * struct flexcop_device from the bus-parts */ +void flexcop_pass_dmx_data(struct flexcop_device *fc, u8 *buf, u32 len) +{ + dvb_dmx_swfilter(&fc->demux, buf, len); +} +EXPORT_SYMBOL(flexcop_pass_dmx_data); + +void flexcop_pass_dmx_packets(struct flexcop_device *fc, u8 *buf, u32 no) +{ + dvb_dmx_swfilter_packets(&fc->demux, buf, no); +} +EXPORT_SYMBOL(flexcop_pass_dmx_packets); + +static void flexcop_reset(struct flexcop_device *fc) +{ + flexcop_ibi_value v210,v204; + +/* reset the flexcop itself */ + fc->write_ibi_reg(fc,ctrl_208,ibi_zero); + + v210.raw = 0; + v210.sw_reset_210.reset_blocks = 0xff; + v210.sw_reset_210.Block_reset_enable = 0xb2; + fc->write_ibi_reg(fc,sw_reset_210,v210); + +/* reset the periphical devices */ + + v204 = fc->read_ibi_reg(fc,misc_204); + v204.misc_204.Per_reset_sig = 0; + fc->write_ibi_reg(fc,misc_204,v204); + v204.misc_204.Per_reset_sig = 1; + fc->write_ibi_reg(fc,misc_204,v204); + +/* v208.raw = 0; + v208.ctrl_208.Null_filter_sig = 1; + fc->write_ibi_reg(fc,ctrl_208,v208);*/ +} + +struct flexcop_device *flexcop_device_kmalloc(size_t bus_specific_len) +{ + void *bus; + struct flexcop_device *fc = kmalloc(sizeof(struct flexcop_device), GFP_KERNEL); + if (!fc) { + err("no memory"); + return NULL; + } + memset(fc, 0, sizeof(struct flexcop_device)); + + bus = kmalloc(bus_specific_len, GFP_KERNEL); + if (!bus) { + err("no memory"); + kfree(fc); + return NULL; + } + memset(bus, 0, bus_specific_len); + + fc->bus_specific = bus; + + return fc; +} +EXPORT_SYMBOL(flexcop_device_kmalloc); + +void flexcop_device_kfree(struct flexcop_device *fc) +{ + kfree(fc->bus_specific); + kfree(fc); +} +EXPORT_SYMBOL(flexcop_device_kfree); + +int flexcop_device_initialize(struct flexcop_device *fc) +{ + int ret; + ibi_zero.raw = 0; + + flexcop_reset(fc); + flexcop_determine_revision(fc); + flexcop_sram_init(fc); + flexcop_hw_filter_init(fc); + + flexcop_smc_ctrl(fc, 0); + + if (fc->get_mac_addr(fc, 0) == 0) { + u8 *b = fc->mac_address; + info("MAC address = %02x:%02x:%02x:%02x:%02x:%02x", b[0],b[1],b[2],b[3],b[4],b[5]); + flexcop_set_mac_filter(fc,fc->mac_address); + flexcop_mac_filter_ctrl(fc,1); + } else + warn("reading of MAC address failed.\n"); + + if ((ret = flexcop_dvb_init(fc))) + goto error; + + if ((ret = flexcop_i2c_init(fc))) + goto error; + + if ((ret = flexcop_frontend_init(fc))) + goto error; + + flexcop_device_name(fc,"initialization of","complete"); + + ret = 0; + goto success; +error: + flexcop_device_exit(fc); +success: + return ret; +} +EXPORT_SYMBOL(flexcop_device_initialize); + +void flexcop_device_exit(struct flexcop_device *fc) +{ + flexcop_frontend_exit(fc); + flexcop_i2c_exit(fc); + flexcop_dvb_exit(fc); +} +EXPORT_SYMBOL(flexcop_device_exit); + +static int flexcop_module_init(void) +{ + info(DRIVER_NAME " loaded successfully"); + return 0; +} + +static void flexcop_module_cleanup(void) +{ + info(DRIVER_NAME " unloaded successfully"); +} + +module_init(flexcop_module_init); +module_exit(flexcop_module_cleanup); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_NAME); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/b2c2/flexcop.h b/drivers/media/dvb/b2c2/flexcop.h new file mode 100644 index 00000000000..caa343a97bd --- /dev/null +++ b/drivers/media/dvb/b2c2/flexcop.h @@ -0,0 +1,30 @@ +/* + * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III + * + * flexcop.h - private header file for all flexcop-chip-source files. + * + * see flexcop.c for copyright information. + */ +#ifndef __FLEXCOP_H__ +#define __FLEXCOP_H___ + +#define FC_LOG_PREFIX "b2c2-flexcop" +#include "flexcop-common.h" + +extern int b2c2_flexcop_debug; + +/* debug */ +#ifdef CONFIG_DVB_B2C2_FLEXCOP_DEBUG +#define dprintk(level,args...) \ + do { if ((b2c2_flexcop_debug & level)) printk(args); } while (0) +#else +#define dprintk(level,args...) +#endif + +#define deb_info(args...) dprintk(0x01,args) +#define deb_tuner(args...) dprintk(0x02,args) +#define deb_i2c(args...) dprintk(0x04,args) +#define deb_ts(args...) dprintk(0x08,args) +#define deb_sram(args...) dprintk(0x10,args) + +#endif |