diff options
| -rw-r--r-- | Documentation/filesystems/ext4.txt | 8 | ||||
| -rw-r--r-- | fs/Kconfig | 88 | ||||
| -rw-r--r-- | fs/Makefile | 2 | ||||
| -rw-r--r-- | fs/ext4/Makefile | 10 | ||||
| -rw-r--r-- | fs/ext4/acl.h | 6 | ||||
| -rw-r--r-- | fs/ext4/ext4_i.h | 4 | ||||
| -rw-r--r-- | fs/ext4/file.c | 2 | ||||
| -rw-r--r-- | fs/ext4/inode.c | 2 | ||||
| -rw-r--r-- | fs/ext4/namei.c | 6 | ||||
| -rw-r--r-- | fs/ext4/super.c | 63 | ||||
| -rw-r--r-- | fs/ext4/symlink.c | 4 | ||||
| -rw-r--r-- | fs/ext4/xattr.c | 8 | ||||
| -rw-r--r-- | fs/ext4/xattr.h | 8 |
13 files changed, 123 insertions, 88 deletions
diff --git a/Documentation/filesystems/ext4.txt b/Documentation/filesystems/ext4.txt index 289057958f9..74484e69640 100644 --- a/Documentation/filesystems/ext4.txt +++ b/Documentation/filesystems/ext4.txt @@ -32,9 +32,9 @@ Mailing list: linux-ext4@vger.kernel.org you will need to merge your changes with the version from e2fsprogs 1.41.x. - - Create a new filesystem using the ext4dev filesystem type: + - Create a new filesystem using the ext4 filesystem type: - # mke2fs -t ext4dev /dev/hda1 + # mke2fs -t ext4 /dev/hda1 Or configure an existing ext3 filesystem to support extents and set the test_fs flag to indicate that it's ok for an in-development @@ -47,13 +47,13 @@ Mailing list: linux-ext4@vger.kernel.org # tune2fs -I 256 /dev/hda1 - (Note: we currently do not have tools to convert an ext4dev + (Note: we currently do not have tools to convert an ext4 filesystem back to ext3; so please do not do try this on production filesystems.) - Mounting: - # mount -t ext4dev /dev/hda1 /wherever + # mount -t ext4 /dev/hda1 /wherever - When comparing performance with other filesystems, remember that ext3/4 by default offers higher data integrity guarantees than most. diff --git a/fs/Kconfig b/fs/Kconfig index abccb5dab9a..40183d94b68 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -136,37 +136,51 @@ config EXT3_FS_SECURITY If you are not using a security module that requires using extended attributes for file security labels, say N. -config EXT4DEV_FS - tristate "Ext4dev/ext4 extended fs support development (EXPERIMENTAL)" - depends on EXPERIMENTAL +config EXT4_FS + tristate "The Extended 4 (ext4) filesystem" select JBD2 select CRC16 help - Ext4dev is a predecessor filesystem of the next generation - extended fs ext4, based on ext3 filesystem code. It will be - renamed ext4 fs later, once ext4dev is mature and stabilized. + This is the next generation of the ext3 filesystem. Unlike the change from ext2 filesystem to ext3 filesystem, - the on-disk format of ext4dev is not the same as ext3 any more: - it is based on extent maps and it supports 48-bit physical block - numbers. These combined on-disk format changes will allow - ext4dev/ext4 to handle more than 16 TB filesystem volumes -- - a hard limit that ext3 cannot overcome without changing the - on-disk format. - - Other than extent maps and 48-bit block numbers, ext4dev also is - likely to have other new features such as persistent preallocation, - high resolution time stamps, and larger file support etc. These - features will be added to ext4dev gradually. + the on-disk format of ext4 is not forwards compatible with + ext3; it is based on extent maps and it supports 48-bit + physical block numbers. The ext4 filesystem also supports delayed + allocation, persistent preallocation, high resolution time stamps, + and a number of other features to improve performance and speed + up fsck time. For more information, please see the web pages at + http://ext4.wiki.kernel.org. + + The ext4 filesystem will support mounting an ext3 + filesystem; while there will be some performance gains from + the delayed allocation and inode table readahead, the best + performance gains will require enabling ext4 features in the + filesystem, or formating a new filesystem as an ext4 + filesystem initially. To compile this file system support as a module, choose M here. The module will be called ext4dev. If unsure, say N. -config EXT4DEV_FS_XATTR - bool "Ext4dev extended attributes" - depends on EXT4DEV_FS +config EXT4DEV_COMPAT + bool "Enable ext4dev compatibility" + depends on EXT4_FS + help + Starting with 2.6.28, the name of the ext4 filesystem was + renamed from ext4dev to ext4. Unfortunately there are some + lagecy userspace programs (such as klibc's fstype) have + "ext4dev" hardcoded. + + To enable backwards compatibility so that systems that are + still expecting to mount ext4 filesystems using ext4dev, + chose Y here. This feature will go away by 2.6.31, so + please arrange to get your userspace programs fixed! + +config EXT4_FS_XATTR + bool "Ext4 extended attributes" + depends on EXT4_FS default y help Extended attributes are name:value pairs associated with inodes by @@ -175,11 +189,11 @@ config EXT4DEV_FS_XATTR If unsure, say N. - You need this for POSIX ACL support on ext4dev/ext4. + You need this for POSIX ACL support on ext4. -config EXT4DEV_FS_POSIX_ACL - bool "Ext4dev POSIX Access Control Lists" - depends on EXT4DEV_FS_XATTR +config EXT4_FS_POSIX_ACL + bool "Ext4 POSIX Access Control Lists" + depends on EXT4_FS_XATTR select FS_POSIX_ACL help POSIX Access Control Lists (ACLs) support permissions for users and @@ -190,14 +204,14 @@ config EXT4DEV_FS_POSIX_ACL If you don't know what Access Control Lists are, say N -config EXT4DEV_FS_SECURITY - bool "Ext4dev Security Labels" - depends on EXT4DEV_FS_XATTR +config EXT4_FS_SECURITY + bool "Ext4 Security Labels" + depends on EXT4_FS_XATTR help Security labels support alternative access control models implemented by security modules like SELinux. This option enables an extended attribute handler for file security - labels in the ext4dev/ext4 filesystem. + labels in the ext4 filesystem. If you are not using a security module that requires using extended attributes for file security labels, say N. @@ -240,22 +254,22 @@ config JBD2 help This is a generic journaling layer for block devices that support both 32-bit and 64-bit block numbers. It is currently used by - the ext4dev/ext4 filesystem, but it could also be used to add + the ext4 filesystem, but it could also be used to add journal support to other file systems or block devices such as RAID or LVM. - If you are using ext4dev/ext4, you need to say Y here. If you are not - using ext4dev/ext4 then you will probably want to say N. + If you are using ext4, you need to say Y here. If you are not + using ext4 then you will probably want to say N. To compile this device as a module, choose M here. The module will be - called jbd2. If you are compiling ext4dev/ext4 into the kernel, + called jbd2. If you are compiling ext4 into the kernel, you cannot compile this code as a module. config JBD2_DEBUG - bool "JBD2 (ext4dev/ext4) debugging support" + bool "JBD2 (ext4) debugging support" depends on JBD2 && DEBUG_FS help - If you are using the ext4dev/ext4 journaled file system (or + If you are using the ext4 journaled file system (or potentially any other filesystem/device using JBD2), this option allows you to enable debugging output while the system is running, in order to help track down any problems you are having. @@ -270,9 +284,9 @@ config JBD2_DEBUG config FS_MBCACHE # Meta block cache for Extended Attributes (ext2/ext3/ext4) tristate - depends on EXT2_FS_XATTR || EXT3_FS_XATTR || EXT4DEV_FS_XATTR - default y if EXT2_FS=y || EXT3_FS=y || EXT4DEV_FS=y - default m if EXT2_FS=m || EXT3_FS=m || EXT4DEV_FS=m + depends on EXT2_FS_XATTR || EXT3_FS_XATTR || EXT4_FS_XATTR + default y if EXT2_FS=y || EXT3_FS=y || EXT4_FS=y + default m if EXT2_FS=m || EXT3_FS=m || EXT4_FS=m config REISERFS_FS tristate "Reiserfs support" diff --git a/fs/Makefile b/fs/Makefile index a1482a5eff1..de404b00eb0 100644 --- a/fs/Makefile +++ b/fs/Makefile @@ -69,7 +69,7 @@ obj-$(CONFIG_DLM) += dlm/ # Do not add any filesystems before this line obj-$(CONFIG_REISERFS_FS) += reiserfs/ obj-$(CONFIG_EXT3_FS) += ext3/ # Before ext2 so root fs can be ext3 -obj-$(CONFIG_EXT4DEV_FS) += ext4/ # Before ext2 so root fs can be ext4dev +obj-$(CONFIG_EXT4_FS) += ext4/ # Before ext2 so root fs can be ext4dev obj-$(CONFIG_JBD) += jbd/ obj-$(CONFIG_JBD2) += jbd2/ obj-$(CONFIG_EXT2_FS) += ext2/ diff --git a/fs/ext4/Makefile b/fs/ext4/Makefile index ac6fa8ca0a2..a8ff003a00f 100644 --- a/fs/ext4/Makefile +++ b/fs/ext4/Makefile @@ -2,12 +2,12 @@ # Makefile for the linux ext4-filesystem routines. # -obj-$(CONFIG_EXT4DEV_FS) += ext4dev.o +obj-$(CONFIG_EXT4_FS) += ext4.o -ext4dev-y := balloc.o bitmap.o dir.o file.o fsync.o ialloc.o inode.o \ +ext4-y := balloc.o bitmap.o dir.o file.o fsync.o ialloc.o inode.o \ ioctl.o namei.o super.o symlink.o hash.o resize.o extents.o \ ext4_jbd2.o migrate.o mballoc.o -ext4dev-$(CONFIG_EXT4DEV_FS_XATTR) += xattr.o xattr_user.o xattr_trusted.o -ext4dev-$(CONFIG_EXT4DEV_FS_POSIX_ACL) += acl.o -ext4dev-$(CONFIG_EXT4DEV_FS_SECURITY) += xattr_security.o +ext4-$(CONFIG_EXT4_FS_XATTR) += xattr.o xattr_user.o xattr_trusted.o +ext4-$(CONFIG_EXT4_FS_POSIX_ACL) += acl.o +ext4-$(CONFIG_EXT4_FS_SECURITY) += xattr_security.o diff --git a/fs/ext4/acl.h b/fs/ext4/acl.h index 4c9948f69f8..cb45257a246 100644 --- a/fs/ext4/acl.h +++ b/fs/ext4/acl.h @@ -51,7 +51,7 @@ static inline int ext4_acl_count(size_t size) } } -#ifdef CONFIG_EXT4DEV_FS_POSIX_ACL +#ifdef CONFIG_EXT4_FS_POSIX_ACL /* Value for inode->u.ext4_i.i_acl and inode->u.ext4_i.i_default_acl if the ACL has not been cached */ @@ -62,7 +62,7 @@ extern int ext4_permission(struct inode *, int); extern int ext4_acl_chmod(struct inode *); extern int ext4_init_acl(handle_t *, struct inode *, struct inode *); -#else /* CONFIG_EXT4DEV_FS_POSIX_ACL */ +#else /* CONFIG_EXT4_FS_POSIX_ACL */ #include <linux/sched.h> #define ext4_permission NULL @@ -77,5 +77,5 @@ ext4_init_acl(handle_t *handle, struct inode *inode, struct inode *dir) { return 0; } -#endif /* CONFIG_EXT4DEV_FS_POSIX_ACL */ +#endif /* CONFIG_EXT4_FS_POSIX_ACL */ diff --git a/fs/ext4/ext4_i.h b/fs/ext4/ext4_i.h index 2875eeca172..5c124c0ac6d 100644 --- a/fs/ext4/ext4_i.h +++ b/fs/ext4/ext4_i.h @@ -66,7 +66,7 @@ struct ext4_inode_info { __u32 i_state; /* Dynamic state flags for ext4 */ ext4_lblk_t i_dir_start_lookup; -#ifdef CONFIG_EXT4DEV_FS_XATTR +#ifdef CONFIG_EXT4_FS_XATTR /* * Extended attributes can be read independently of the main file * data. Taking i_mutex even when reading would cause contention @@ -76,7 +76,7 @@ struct ext4_inode_info { */ struct rw_semaphore xattr_sem; #endif -#ifdef CONFIG_EXT4DEV_FS_POSIX_ACL +#ifdef CONFIG_EXT4_FS_POSIX_ACL struct posix_acl *i_acl; struct posix_acl *i_default_acl; #endif diff --git a/fs/ext4/file.c b/fs/ext4/file.c index 6d5be156202..6bd11fba71f 100644 --- a/fs/ext4/file.c +++ b/fs/ext4/file.c @@ -165,7 +165,7 @@ const struct inode_operations ext4_file_inode_operations = { .truncate = ext4_truncate, .setattr = ext4_setattr, .getattr = ext4_getattr, -#ifdef CONFIG_EXT4DEV_FS_XATTR +#ifdef CONFIG_EXT4_FS_XATTR .setxattr = generic_setxattr, .getxattr = generic_getxattr, .listxattr = ext4_listxattr, diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index a4747867411..9b4ec9decfd 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -4041,7 +4041,7 @@ struct inode *ext4_iget(struct super_block *sb, unsigned long ino) return inode; ei = EXT4_I(inode); -#ifdef CONFIG_EXT4DEV_FS_POSIX_ACL +#ifdef CONFIG_EXT4_FS_POSIX_ACL ei->i_acl = EXT4_ACL_NOT_CACHED; ei->i_default_acl = EXT4_ACL_NOT_CACHED; #endif diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c index 5295a9225cf..92db9e94514 100644 --- a/fs/ext4/namei.c +++ b/fs/ext4/namei.c @@ -1773,7 +1773,7 @@ retry: err = PTR_ERR(inode); if (!IS_ERR(inode)) { init_special_inode(inode, inode->i_mode, rdev); -#ifdef CONFIG_EXT4DEV_FS_XATTR +#ifdef CONFIG_EXT4_FS_XATTR inode->i_op = &ext4_special_inode_operations; #endif err = ext4_add_nondir(handle, dentry, inode); @@ -2456,7 +2456,7 @@ const struct inode_operations ext4_dir_inode_operations = { .mknod = ext4_mknod, .rename = ext4_rename, .setattr = ext4_setattr, -#ifdef CONFIG_EXT4DEV_FS_XATTR +#ifdef CONFIG_EXT4_FS_XATTR .setxattr = generic_setxattr, .getxattr = generic_getxattr, .listxattr = ext4_listxattr, @@ -2467,7 +2467,7 @@ const struct inode_operations ext4_dir_inode_operations = { const struct inode_operations ext4_special_inode_operations = { .setattr = ext4_setattr, -#ifdef CONFIG_EXT4DEV_FS_XATTR +#ifdef CONFIG_EXT4_FS_XATTR .setxattr = generic_setxattr, .getxattr = generic_getxattr, .listxattr = ext4_listxattr, diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 7d865608e81..0e661c56966 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -569,7 +569,7 @@ static struct inode *ext4_alloc_inode(struct super_block *sb) ei = kmem_cache_alloc(ext4_inode_cachep, GFP_NOFS); if (!ei) return NULL; -#ifdef CONFIG_EXT4DEV_FS_POSIX_ACL +#ifdef CONFIG_EXT4_FS_POSIX_ACL ei->i_acl = EXT4_ACL_NOT_CACHED; ei->i_default_acl = EXT4_ACL_NOT_CACHED; #endif @@ -605,7 +605,7 @@ static void init_once(void *foo) struct ext4_inode_info *ei = (struct ext4_inode_info *) foo; INIT_LIST_HEAD(&ei->i_orphan); -#ifdef CONFIG_EXT4DEV_FS_XATTR +#ifdef CONFIG_EXT4_FS_XATTR init_rwsem(&ei->xattr_sem); #endif init_rwsem(&ei->i_data_sem); @@ -631,7 +631,7 @@ static void destroy_inodecache(void) static void ext4_clear_inode(struct inode *inode) { -#ifdef CONFIG_EXT4DEV_FS_POSIX_ACL +#ifdef CONFIG_EXT4_FS_POSIX_ACL if (EXT4_I(inode)->i_acl && EXT4_I(inode)->i_acl != EXT4_ACL_NOT_CACHED) { posix_acl_release(EXT4_I(inode)->i_acl); @@ -720,7 +720,7 @@ static int ext4_show_options(struct seq_file *seq, struct vfsmount *vfs) seq_puts(seq, ",debug"); if (test_opt(sb, OLDALLOC)) seq_puts(seq, ",oldalloc"); -#ifdef CONFIG_EXT4DEV_FS_XATTR +#ifdef CONFIG_EXT4_FS_XATTR if (test_opt(sb, XATTR_USER) && !(def_mount_opts & EXT4_DEFM_XATTR_USER)) seq_puts(seq, ",user_xattr"); @@ -729,7 +729,7 @@ static int ext4_show_options(struct seq_file *seq, struct vfsmount *vfs) seq_puts(seq, ",nouser_xattr"); } #endif -#ifdef CONFIG_EXT4DEV_FS_POSIX_ACL +#ifdef CONFIG_EXT4_FS_POSIX_ACL if (test_opt(sb, POSIX_ACL) && !(def_mount_opts & EXT4_DEFM_ACL)) seq_puts(seq, ",acl"); if (!test_opt(sb, POSIX_ACL) && (def_mount_opts & EXT4_DEFM_ACL)) @@ -1078,7 +1078,7 @@ static int parse_options(char *options, struct super_block *sb, case Opt_orlov: clear_opt(sbi->s_mount_opt, OLDALLOC); break; -#ifdef CONFIG_EXT4DEV_FS_XATTR +#ifdef CONFIG_EXT4_FS_XATTR case Opt_user_xattr: set_opt(sbi->s_mount_opt, XATTR_USER); break; @@ -1092,7 +1092,7 @@ static int parse_options(char *options, struct super_block *sb, "not supported\n"); break; #endif -#ifdef CONFIG_EXT4DEV_FS_POSIX_ACL +#ifdef CONFIG_EXT4_FS_POSIX_ACL case Opt_acl: set_opt(sbi->s_mount_opt, POSIX_ACL); break; @@ -1987,11 +1987,11 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent) set_opt(sbi->s_mount_opt, GRPID); if (def_mount_opts & EXT4_DEFM_UID16) set_opt(sbi->s_mount_opt, NO_UID32); -#ifdef CONFIG_EXT4DEV_FS_XATTR +#ifdef CONFIG_EXT4_FS_XATTR if (def_mount_opts & EXT4_DEFM_XATTR_USER) set_opt(sbi->s_mount_opt, XATTR_USER); #endif -#ifdef CONFIG_EXT4DEV_FS_POSIX_ACL +#ifdef CONFIG_EXT4_FS_POSIX_ACL if (def_mount_opts & EXT4_DEFM_ACL) set_opt(sbi->s_mount_opt, POSIX_ACL); #endif @@ -2050,16 +2050,6 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent) "running e2fsck is recommended\n"); /* - * Since ext4 is still considered development code, we require - * that the TEST_FILESYS flag in s->flags be set. - */ - if (!(le32_to_cpu(es->s_flags) & EXT2_FLAGS_TEST_FILESYS)) { - printk(KERN_WARNING "EXT4-fs: %s: not marked " - "OK to use with test code.\n", sb->s_id); - goto failed_mount; - } - - /* * Check feature flags regardless of the revision level, since we * previously didn't change the revision level when setting the flags, * so there is a chance incompat flags are set on a rev 0 filesystem. @@ -3580,13 +3570,34 @@ const struct file_operations ext4_ui_proc_fops = { }; #endif +static struct file_system_type ext4_fs_type = { + .owner = THIS_MODULE, + .name = "ext4", + .get_sb = ext4_get_sb, + .kill_sb = kill_block_super, + .fs_flags = FS_REQUIRES_DEV, +}; + +#ifdef CONFIG_EXT4DEV_COMPAT +static int ext4dev_get_sb(struct file_system_type *fs_type, + int flags, const char *dev_name, void *data, struct vfsmount *mnt) +{ + printk(KERN_WARNING "EXT4-fs: Update your userspace programs " + "to mount using ext4\n"); + printk(KERN_WARNING "EXT4-fs: ext4dev backwards compatibility " + "will go away by 2.6.31\n"); + return get_sb_bdev(fs_type, flags, dev_name, data, ext4_fill_super, mnt); +} + static struct file_system_type ext4dev_fs_type = { .owner = THIS_MODULE, .name = "ext4dev", - .get_sb = ext4_get_sb, + .get_sb = ext4dev_get_sb, .kill_sb = kill_block_super, .fs_flags = FS_REQUIRES_DEV, }; +MODULE_ALIAS("ext4dev"); +#endif static int __init init_ext4_fs(void) { @@ -3603,9 +3614,16 @@ static int __init init_ext4_fs(void) err = init_inodecache(); if (err) goto out1; - err = register_filesystem(&ext4dev_fs_type); + err = register_filesystem(&ext4_fs_type); if (err) goto out; +#ifdef CONFIG_EXT4DEV_COMPAT + err = register_filesystem(&ext4dev_fs_type); + if (err) { + unregister_filesystem(&ext4_fs_type); + goto out; + } +#endif return 0; out: destroy_inodecache(); @@ -3618,7 +3636,10 @@ out2: static void __exit exit_ext4_fs(void) { + unregister_filesystem(&ext4_fs_type); +#ifdef CONFIG_EXT4DEV_COMPAT unregister_filesystem(&ext4dev_fs_type); +#endif destroy_inodecache(); exit_ext4_xattr(); exit_ext4_mballoc(); diff --git a/fs/ext4/symlink.c b/fs/ext4/symlink.c index 0013d52f73b..00740cb32be 100644 --- a/fs/ext4/symlink.c +++ b/fs/ext4/symlink.c @@ -34,7 +34,7 @@ const struct inode_operations ext4_symlink_inode_operations = { .readlink = generic_readlink, .follow_link = page_follow_link_light, .put_link = page_put_link, -#ifdef CONFIG_EXT4DEV_FS_XATTR +#ifdef CONFIG_EXT4_FS_XATTR .setxattr = generic_setxattr, .getxattr = generic_getxattr, .listxattr = ext4_listxattr, @@ -45,7 +45,7 @@ const struct inode_operations ext4_symlink_inode_operations = { const struct inode_operations ext4_fast_symlink_inode_operations = { .readlink = generic_readlink, .follow_link = ext4_follow_link, -#ifdef CONFIG_EXT4DEV_FS_XATTR +#ifdef CONFIG_EXT4_FS_XATTR .setxattr = generic_setxattr, .getxattr = generic_getxattr, .listxattr = ext4_listxattr, diff --git a/fs/ext4/xattr.c b/fs/ext4/xattr.c index 362b0edd3db..80626d516fe 100644 --- a/fs/ext4/xattr.c +++ b/fs/ext4/xattr.c @@ -99,12 +99,12 @@ static struct mb_cache *ext4_xattr_cache; static struct xattr_handler *ext4_xattr_handler_map[] = { [EXT4_XATTR_INDEX_USER] = &ext4_xattr_user_handler, -#ifdef CONFIG_EXT4DEV_FS_POSIX_ACL +#ifdef CONFIG_EXT4_FS_POSIX_ACL [EXT4_XATTR_INDEX_POSIX_ACL_ACCESS] = &ext4_xattr_acl_access_handler, [EXT4_XATTR_INDEX_POSIX_ACL_DEFAULT] = &ext4_xattr_acl_default_handler, #endif [EXT4_XATTR_INDEX_TRUSTED] = &ext4_xattr_trusted_handler, -#ifdef CONFIG_EXT4DEV_FS_SECURITY +#ifdef CONFIG_EXT4_FS_SECURITY [EXT4_XATTR_INDEX_SECURITY] = &ext4_xattr_security_handler, #endif }; @@ -112,11 +112,11 @@ static struct xattr_handler *ext4_xattr_handler_map[] = { struct xattr_handler *ext4_xattr_handlers[] = { &ext4_xattr_user_handler, &ext4_xattr_trusted_handler, -#ifdef CONFIG_EXT4DEV_FS_POSIX_ACL +#ifdef CONFIG_EXT4_FS_POSIX_ACL &ext4_xattr_acl_access_handler, &ext4_xattr_acl_default_handler, #endif -#ifdef CONFIG_EXT4DEV_FS_SECURITY +#ifdef CONFIG_EXT4_FS_SECURITY &ext4_xattr_security_handler, #endif NULL diff --git a/fs/ext4/xattr.h b/fs/ext4/xattr.h index 814ea58d4d5..8ede88b18c2 100644 --- a/fs/ext4/xattr.h +++ b/fs/ext4/xattr.h @@ -63,7 +63,7 @@ struct ext4_xattr_entry { EXT4_I(inode)->i_extra_isize)) #define IFIRST(hdr) ((struct ext4_xattr_entry *)((hdr)+1)) -# ifdef CONFIG_EXT4DEV_FS_XATTR +# ifdef CONFIG_EXT4_FS_XATTR extern struct xattr_handler ext4_xattr_user_handler; extern struct xattr_handler ext4_xattr_trusted_handler; @@ -88,7 +88,7 @@ extern void exit_ext4_xattr(void); extern struct xattr_handler *ext4_xattr_handlers[]; -# else /* CONFIG_EXT4DEV_FS_XATTR */ +# else /* CONFIG_EXT4_FS_XATTR */ static inline int ext4_xattr_get(struct inode *inode, int name_index, const char *name, @@ -141,9 +141,9 @@ ext4_expand_extra_isize_ea(struct inode *inode, int new_extra_isize, #define ext4_xattr_handlers NULL -# endif /* CONFIG_EXT4DEV_FS_XATTR */ +# endif /* CONFIG_EXT4_FS_XATTR */ -#ifdef CONFIG_EXT4DEV_FS_SECURITY +#ifdef CONFIG_EXT4_FS_SECURITY extern int ext4_init_security(handle_t *handle, struct inode *inode, struct inode *dir); #else |