diff options
author | Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> | 2009-07-22 05:22:28 +0200 |
---|---|---|
committer | Mark Brown <broonie@opensource.wolfsonmicro.com> | 2009-07-23 11:08:29 +0100 |
commit | 459dc35233c88d9eb7c5d0e6c086122751e64750 (patch) | |
tree | 8e2e4f645a2e23ce80b11d52a46d0e18d8c99ac3 /sound/soc/codecs/cx20442.h | |
parent | c30853df9834bccc2841798b0ab8f151929ae500 (diff) | |
download | kernel_samsung_smdk4412-459dc35233c88d9eb7c5d0e6c086122751e64750.tar.gz kernel_samsung_smdk4412-459dc35233c88d9eb7c5d0e6c086122751e64750.tar.bz2 kernel_samsung_smdk4412-459dc35233c88d9eb7c5d0e6c086122751e64750.zip |
ASoC: Add support for Conexant CX20442-11 voice modem codec
This patch adds support for Conexant CX20442-11 voice modem codec, suitable
for use by the ASoC board driver for Amstrad E3 (Delta) videophone. Related
sound card driver will follow.
This codec is an optional part of the Conexant SmartV three chip modem design.
As such, documentation for its proprietary digital audio interface is not
available. However, on Amstrad Delta board, thanks to Mark Underwood who
created an initial, omap-alsa based sound driver a few years ago[1], the codec
has been discovered to be accessible not only from the modem side, but also
over the OMAP McBSP based CPU DAI. Thus, the driver can be used by any sound
card that can access the codec DAI directly. The DAI configuration parameters
(sample rate and format, number of channels) has been selected out empirically
for best user experience.
The codec analogue interface consists of two pairs of analogue I/O pins:
speakerphone interface or telephone handset/headset interface. Furthermore, it
seams to provide two operation modes for speakerphone I/O: standard and
advanced, with automatic gain control and echo cancelation. Even if the codec
control interface is unknown and not available, all those interfaces and modes
can be selected over the modem chip using V.253 commands. The driver is able
to issue necessary commands over a suitable hw_write function if provided by a
sound card driver. Otherwise, the codec can be controlled over the modem from
userspace while inactive.
Even if nothig is known about the codec internal power management
capabilities, DAPM widgets has been used to model the codec audio map.
Automatically performed powering up/down of those virtual widgets results in
corresponding V.253 commands being issued.
Some driver features/oddities may be board specific, but I have no way to
verify that with any board other than Amstrad Delta.
[1] http://www.earth.li/pipermail/e3-hacking/2006-April/000481.html
Created and tested against linux-2.6.31-rc3.
Applies and works with linux-omap-2.6 commit
7c5cb7862d32cb344be7831d466535d5255e35ac as well.
Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Diffstat (limited to 'sound/soc/codecs/cx20442.h')
-rw-r--r-- | sound/soc/codecs/cx20442.h | 19 |
1 files changed, 19 insertions, 0 deletions
diff --git a/sound/soc/codecs/cx20442.h b/sound/soc/codecs/cx20442.h new file mode 100644 index 00000000000..d0a4f297aef --- /dev/null +++ b/sound/soc/codecs/cx20442.h @@ -0,0 +1,19 @@ +/* + * cx20442.h -- audio driver for CX20442 + * + * Copyright 2009 Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef _CX20442_CODEC_H +#define _CX20442_CODEC_H + +extern struct snd_soc_dai cx20442_dai; +extern struct snd_soc_codec_device cx20442_codec_dev; + +#endif |