Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (158 commits)
  [SCSI] Fix printing of failed 32-byte commands
  [SCSI] Fix printing of variable length commands
  [SCSI] libsrp: fix bug in ADDITIONAL CDB LENGTH interpretation
  [SCSI] scsi_dh_alua: Add IBM Power Virtual SCSI ALUA device to dev list
  [SCSI] scsi_dh_alua: add netapp to dev list
  [SCSI] qla2xxx: Update version number to 8.03.02-k1.
  [SCSI] qla2xxx: EEH: Restore PCI saved state during pci slot reset.
  [SCSI] qla2xxx: Add firmware ETS burst support.
  [SCSI] qla2xxx: Correct loop-resync issues during SNS scans.
  [SCSI] qla2xxx: Correct use-after-free issue in terminate_rport_io callback.
  [SCSI] qla2xxx: Correct EH bus-reset handling.
  [SCSI] qla2xxx: Proper clean-up of BSG requests when request times out.
  [SCSI] qla2xxx: Initialize payload receive length in failure path of vendor commands
  [SCSI] fix duplicate removal on error path in scsi_sysfs_add_sdev
  [SCSI] fix refcounting bug in scsi_get_host_dev
  [SCSI] fix memory leak in scsi_report_lun_scan
  [SCSI] lpfc: correct PPC build failure
  [SCSI] raid_class: add raid1e
  [SCSI] mpt2sas: Do not call sas_is_tlr_enabled for RAID volumes.
  [SCSI] zfcp: Introduce header file for qdio structs and inline functions
  ...

1 files changed, 105 insertions, 6 deletions

diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c
index a9afd8b94b6..6c4dce1a30c 100644
--- a/drivers/scsi/lpfc/lpfc_mbox.c
+++ b/drivers/scsi/lpfc/lpfc_mbox.c
@@ -1707,7 +1707,8 @@ lpfc_sli4_config(struct lpfc_hba *phba, struct lpfcMboxq *mbox,
 				alloc_len - sizeof(union  lpfc_sli4_cfg_shdr);
 	}
 	/* The sub-header is in DMA memory, which needs endian converstion */
-	lpfc_sli_pcimem_bcopy(cfg_shdr, cfg_shdr,
+	if (cfg_shdr)
+		lpfc_sli_pcimem_bcopy(cfg_shdr, cfg_shdr,
 			      sizeof(union  lpfc_sli4_cfg_shdr));
 
 	return alloc_len;
@@ -1747,6 +1748,65 @@ lpfc_sli4_mbox_opcode_get(struct lpfc_hba *phba, struct lpfcMboxq *mbox)
 }
 
 /**
+ * lpfc_sli4_mbx_read_fcf_record - Allocate and construct read fcf mbox cmd
+ * @phba: pointer to lpfc hba data structure.
+ * @fcf_index: index to fcf table.
+ *
+ * This routine routine allocates and constructs non-embedded mailbox command
+ * for reading a FCF table entry refered by @fcf_index.
+ *
+ * Return: pointer to the mailbox command constructed if successful, otherwise
+ * NULL.
+ **/
+int
+lpfc_sli4_mbx_read_fcf_record(struct lpfc_hba *phba,
+			      struct lpfcMboxq *mboxq,
+			      uint16_t fcf_index)
+{
+	void *virt_addr;
+	dma_addr_t phys_addr;
+	uint8_t *bytep;
+	struct lpfc_mbx_sge sge;
+	uint32_t alloc_len, req_len;
+	struct lpfc_mbx_read_fcf_tbl *read_fcf;
+
+	if (!mboxq)
+		return -ENOMEM;
+
+	req_len = sizeof(struct fcf_record) +
+		  sizeof(union lpfc_sli4_cfg_shdr) + 2 * sizeof(uint32_t);
+
+	/* Set up READ_FCF SLI4_CONFIG mailbox-ioctl command */
+	alloc_len = lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_FCOE,
+			LPFC_MBOX_OPCODE_FCOE_READ_FCF_TABLE, req_len,
+			LPFC_SLI4_MBX_NEMBED);
+
+	if (alloc_len < req_len) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
+				"0291 Allocated DMA memory size (x%x) is "
+				"less than the requested DMA memory "
+				"size (x%x)\n", alloc_len, req_len);
+		return -ENOMEM;
+	}
+
+	/* Get the first SGE entry from the non-embedded DMA memory. This
+	 * routine only uses a single SGE.
+	 */
+	lpfc_sli4_mbx_sge_get(mboxq, 0, &sge);
+	phys_addr = getPaddr(sge.pa_hi, sge.pa_lo);
+	virt_addr = mboxq->sge_array->addr[0];
+	read_fcf = (struct lpfc_mbx_read_fcf_tbl *)virt_addr;
+
+	/* Set up command fields */
+	bf_set(lpfc_mbx_read_fcf_tbl_indx, &read_fcf->u.request, fcf_index);
+	/* Perform necessary endian conversion */
+	bytep = virt_addr + sizeof(union lpfc_sli4_cfg_shdr);
+	lpfc_sli_pcimem_bcopy(bytep, bytep, sizeof(uint32_t));
+
+	return 0;
+}
+
+/**
  * lpfc_request_features: Configure SLI4 REQUEST_FEATURES mailbox
  * @mboxq: pointer to lpfc mbox command.
  *
@@ -1946,13 +2006,14 @@ lpfc_reg_fcfi(struct lpfc_hba *phba, struct lpfcMboxq *mbox)
 	bf_set(lpfc_reg_fcfi_rq_id1, reg_fcfi, REG_FCF_INVALID_QID);
 	bf_set(lpfc_reg_fcfi_rq_id2, reg_fcfi, REG_FCF_INVALID_QID);
 	bf_set(lpfc_reg_fcfi_rq_id3, reg_fcfi, REG_FCF_INVALID_QID);
-	bf_set(lpfc_reg_fcfi_info_index, reg_fcfi, phba->fcf.fcf_indx);
+	bf_set(lpfc_reg_fcfi_info_index, reg_fcfi,
+	       phba->fcf.current_rec.fcf_indx);
 	/* reg_fcf addr mode is bit wise inverted value of fcf addr_mode */
-	bf_set(lpfc_reg_fcfi_mam, reg_fcfi,
-		(~phba->fcf.addr_mode) & 0x3);
-	if (phba->fcf.fcf_flag & FCF_VALID_VLAN) {
+	bf_set(lpfc_reg_fcfi_mam, reg_fcfi, (~phba->fcf.addr_mode) & 0x3);
+	if (phba->fcf.current_rec.vlan_id != 0xFFFF) {
 		bf_set(lpfc_reg_fcfi_vv, reg_fcfi, 1);
-		bf_set(lpfc_reg_fcfi_vlan_tag, reg_fcfi, phba->fcf.vlan_id);
+		bf_set(lpfc_reg_fcfi_vlan_tag, reg_fcfi,
+		       phba->fcf.current_rec.vlan_id);
 	}
 }
 
@@ -1992,3 +2053,41 @@ lpfc_resume_rpi(struct lpfcMboxq *mbox, struct lpfc_nodelist *ndlp)
 	bf_set(lpfc_resume_rpi_ii, resume_rpi, RESUME_INDEX_RPI);
 	resume_rpi->event_tag = ndlp->phba->fc_eventTag;
 }
+
+/**
+ * lpfc_supported_pages - Initialize the PORT_CAPABILITIES supported pages
+ *                        mailbox command.
+ * @mbox: pointer to lpfc mbox command to initialize.
+ *
+ * The PORT_CAPABILITIES supported pages mailbox command is issued to
+ * retrieve the particular feature pages supported by the port.
+ **/
+void
+lpfc_supported_pages(struct lpfcMboxq *mbox)
+{
+	struct lpfc_mbx_supp_pages *supp_pages;
+
+	memset(mbox, 0, sizeof(*mbox));
+	supp_pages = &mbox->u.mqe.un.supp_pages;
+	bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_PORT_CAPABILITIES);
+	bf_set(cpn, supp_pages, LPFC_SUPP_PAGES);
+}
+
+/**
+ * lpfc_sli4_params - Initialize the PORT_CAPABILITIES SLI4 Params
+ *                    mailbox command.
+ * @mbox: pointer to lpfc mbox command to initialize.
+ *
+ * The PORT_CAPABILITIES SLI4 parameters mailbox command is issued to
+ * retrieve the particular SLI4 features supported by the port.
+ **/
+void
+lpfc_sli4_params(struct lpfcMboxq *mbox)
+{
+	struct lpfc_mbx_sli4_params *sli4_params;
+
+	memset(mbox, 0, sizeof(*mbox));
+	sli4_params = &mbox->u.mqe.un.sli4_params;
+	bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_PORT_CAPABILITIES);
+	bf_set(cpn, sli4_params, LPFC_SLI4_PARAMETERS);
+}