Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
  Update broken web addresses in arch directory.
  Update broken web addresses in the kernel.
  Revert "drivers/usb: Remove unnecessary return's from void functions" for musb gadget
  Revert "Fix typo: configuation => configuration" partially
  ida: document IDA_BITMAP_LONGS calculation
  ext2: fix a typo on comment in ext2/inode.c
  drivers/scsi: Remove unnecessary casts of private_data
  drivers/s390: Remove unnecessary casts of private_data
  net/sunrpc/rpc_pipe.c: Remove unnecessary casts of private_data
  drivers/infiniband: Remove unnecessary casts of private_data
  drivers/gpu/drm: Remove unnecessary casts of private_data
  kernel/pm_qos_params.c: Remove unnecessary casts of private_data
  fs/ecryptfs: Remove unnecessary casts of private_data
  fs/seq_file.c: Remove unnecessary casts of private_data
  arm: uengine.c: remove C99 comments
  arm: scoop.c: remove C99 comments
  Fix typo configue => configure in comments
  Fix typo: configuation => configuration
  Fix typo interrest[ing|ed] => interest[ing|ed]
  Fix various typos of valid in comments
  ...

Fix up trivial conflicts in:
	drivers/char/ipmi/ipmi_si_intf.c
	drivers/usb/gadget/rndis.c
	net/irda/irnet/irnet_ppp.c

29 files changed, 43 insertions, 45 deletions

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 7ca1fc8a3a7..77c1fab7d77 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -924,7 +924,7 @@ config SMC91X
 	  including the SMC91C94 and the SMC91C111. Say Y if you want it
 	  compiled into the kernel, and read the file
 	  <file:Documentation/networking/smc9.txt>  and the Ethernet-HOWTO,
-	  available from  <http://www.linuxdoc.org/docs.html#howto>.
+	  available from  <http://www.tldp.org/docs.html#howto>.
 
 	  This driver is also available as a module ( = code which can be
 	  inserted in and removed from the running kernel whenever you want).
@@ -1034,7 +1034,7 @@ config SMC911X
 	  including the new LAN9115, LAN9116, LAN9117, and LAN9118.
 	  Say Y if you want it compiled into the kernel, 
 	  and read the Ethernet-HOWTO, available from
-	  <http://www.linuxdoc.org/docs.html#howto>.
+	  <http://www.tldp.org/docs.html#howto>.
 
 	  This driver is also available as a module. The module will be 
 	  called smc911x.  If you want to compile it as a module, say M 
@@ -1516,7 +1516,7 @@ config E100
 
 	  For the latest Intel PRO/100 network driver for Linux, see:
 
-	  <http://appsr.intel.com/scripts-df/support_intel.asp>
+	  <http://www.intel.com/p/en_US/support/highlights/network/pro100plus>
 
 	  More specific information on configuring the driver is in 
 	  <file:Documentation/networking/e100.txt>.
@@ -1542,9 +1542,8 @@ config FEALNX
 	select CRC32
 	select MII
 	help
-	  Say Y here to support the Mysom MTD-800 family of PCI-based Ethernet
-	  cards. Specifications and data at
-	  <http://www.myson.com.hk/mtd/datasheet/>.
+	  Say Y here to support the Myson MTD-800 family of PCI-based Ethernet 
+	  cards. <http://www.myson.com.tw/>
 
 config NATSEMI
 	tristate "National Semiconductor DP8381x series PCI Ethernet support"
@@ -1718,7 +1717,7 @@ config SMSC9420
 	  This is a driver for SMSC's LAN9420 PCI ethernet adapter.
 	  Say Y if you want it compiled into the kernel,
 	  and read the Ethernet-HOWTO, available from
-	  <http://www.linuxdoc.org/docs.html#howto>.
+	  <http://www.tldp.org/docs.html#howto>.
 
 	  This driver is also available as a module. The module will be
 	  called smsc9420.  If you want to compile it as a module, say M
@@ -2565,7 +2564,7 @@ config CHELSIO_T1
           our website at <http://www.chelsio.com>.
 
           For customer support, please visit our customer support page at
-          <http://www.chelsio.com/support.htm>.
+          <http://www.chelsio.com/support.html>.
 
           Please send feedback to <linux-bugs@chelsio.com>.
 
@@ -2597,7 +2596,7 @@ config CHELSIO_T3
 	  our website at <http://www.chelsio.com>.
 
 	  For customer support, please visit our customer support page at
-	  <http://www.chelsio.com/support.htm>.
+	  <http://www.chelsio.com/support.html>.
 
 	  Please send feedback to <linux-bugs@chelsio.com>.
 
@@ -2622,7 +2621,7 @@ config CHELSIO_T4
 	  our website at <http://www.chelsio.com>.
 
 	  For customer support, please visit our customer support page at
-	  <http://www.chelsio.com/support.htm>.
+	  <http://www.chelsio.com/support.html>.
 
 	  Please send feedback to <linux-bugs@chelsio.com>.
 
@@ -2645,7 +2644,7 @@ config CHELSIO_T4VF
 	  our website at <http://www.chelsio.com>.
 
 	  For customer support, please visit our customer support page at
-	  <http://www.chelsio.com/support.htm>.
+	  <http://www.chelsio.com/support.html>.
 
 	  Please send feedback to <linux-bugs@chelsio.com>.
 
diff --git a/drivers/net/appletalk/Kconfig b/drivers/net/appletalk/Kconfig
index 20f97e7017c..0b376a99097 100644
--- a/drivers/net/appletalk/Kconfig
+++ b/drivers/net/appletalk/Kconfig
@@ -19,7 +19,7 @@ config ATALK
 
 	  General information about how to connect Linux, Windows machines and
 	  Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>.  The
-	  NET-3-HOWTO, available from
+	  NET3-4-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>, contains valuable
 	  information as well.
 
diff --git a/drivers/net/atp.c b/drivers/net/atp.c
index dfd96b20547..f3459798b0e 100644
--- a/drivers/net/atp.c
+++ b/drivers/net/atp.c
@@ -68,7 +68,7 @@ static int xcvr[NUM_UNITS]; 			/* The data transfer mode. */
 
 	In 1997 Realtek made available the documentation for the second generation
 	RTL8012 chip, which has lead to several driver improvements.
-	  http://www.realtek.com.tw/cn/cn.html
+	  http://www.realtek.com.tw/
 
 					Theory of Operation
 
diff --git a/drivers/net/depca.c b/drivers/net/depca.c
index 44c0694c1f4..91b3846ffc8 100644
--- a/drivers/net/depca.c
+++ b/drivers/net/depca.c
@@ -1487,7 +1487,7 @@ static void __init depca_platform_probe (void)
 		if (!pldev->dev.driver) {
 		/* The driver was not bound to this device, there was
 		 * no hardware at this address. Unregister it, as the
-		 * release fuction will take care of freeing the
+		 * release function will take care of freeing the
 		 * allocated structure */
 
 			depca_io_ports[i].device = NULL;
diff --git a/drivers/net/epic100.c b/drivers/net/epic100.c
index 32543a300b8..aa56963ad55 100644
--- a/drivers/net/epic100.c
+++ b/drivers/net/epic100.c
@@ -131,8 +131,8 @@ IIIa. Ring buffers
 
 IVb. References
 
-http://www.smsc.com/main/tools/discontinued/83c171.pdf
-http://www.smsc.com/main/tools/discontinued/83c175.pdf
+http://www.smsc.com/media/Downloads_Public/discontinued/83c171.pdf
+http://www.smsc.com/media/Downloads_Public/discontinued/83c175.pdf
 http://scyld.com/expert/NWay.html
 http://www.national.com/pf/DP/DP83840A.html
 
diff --git a/drivers/net/hamradio/Kconfig b/drivers/net/hamradio/Kconfig
index 62d5d5cfd6a..95dbcfdf131 100644
--- a/drivers/net/hamradio/Kconfig
+++ b/drivers/net/hamradio/Kconfig
@@ -73,7 +73,7 @@ config DMASCC
 	  certain parameters, such as channel access timing, clock mode, and
 	  DMA channel. This is accomplished with a small utility program,
 	  dmascc_cfg, available at
-	  <http://cacofonix.nt.tuwien.ac.at/~oe1kib/Linux/>. Please be sure to
+	  <http://www.linux-ax25.org/wiki/Ax25-tools>. Please be sure to
 	  get at least version 1.27 of dmascc_cfg, as older versions will not
 	  work with the current driver.
 
diff --git a/drivers/net/ibmlana.c b/drivers/net/ibmlana.c
index 0037a696cd0..94d9969ec0b 100644
--- a/drivers/net/ibmlana.c
+++ b/drivers/net/ibmlana.c
@@ -23,7 +23,7 @@ paper sources:
   'LAN Technical Reference Ethernet Adapter Interface Version 1 Release 1.0
    Document Number SC30-3661-00' by IBM for info on the adapter itself
 
-  Also see http://www.natsemi.com/
+  Also see http://www.national.com/analog 
 
 special acknowledgements to:
   - Bob Eager for helping me out with documentation from IBM
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index 75155a27fdd..14db09e2fa8 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -3540,7 +3540,7 @@ enum latency_range {
  *      Stores a new ITR value based on strictly on packet size.  This
  *      algorithm is less sophisticated than that used in igb_update_itr,
  *      due to the difficulty of synchronizing statistics across multiple
- *      receive rings.  The divisors and thresholds used by this fuction
+ *      receive rings.  The divisors and thresholds used by this function
  *      were determined based on theoretical maximum wire speed and testing
  *      data, in order to minimize response time while increasing bulk
  *      throughput.
diff --git a/drivers/net/irda/ali-ircc.c b/drivers/net/irda/ali-ircc.c
index a3cb109006a..92631eb6f6a 100644
--- a/drivers/net/irda/ali-ircc.c
+++ b/drivers/net/irda/ali-ircc.c
@@ -142,7 +142,7 @@ static void SetCOMInterrupts(struct ali_ircc_cb *self , unsigned char enable);
  * Function ali_ircc_init ()
  *
  *    Initialize chip. Find out whay kinds of chips we are dealing with
- *    and their configuation registers address
+ *    and their configuration registers address
  */
 static int __init ali_ircc_init(void)
 {
diff --git a/drivers/net/irda/donauboe.h b/drivers/net/irda/donauboe.h
index 36c3060411d..4dc39e5f015 100644
--- a/drivers/net/irda/donauboe.h
+++ b/drivers/net/irda/donauboe.h
@@ -54,7 +54,7 @@
 /* anyone who has. HOWEVER the chip bears a striking resemblence */
 /* to the IrDA controller in the Toshiba RISC TMPR3922 chip      */
 /* the documentation for this is freely available at             */
-/* http://www.toshiba.com/taec/components/Generic/TMPR3922.shtml */
+/* http://www.madingley.org/james/resources/toshoboe/TMPR3922.pdf */
 /* The mapping between the registers in that document and the    */
 /* Registers in the 701 oboe chip are as follows    */
 
diff --git a/drivers/net/pci-skeleton.c b/drivers/net/pci-skeleton.c
index 8dd03439d99..1766dc4f07e 100644
--- a/drivers/net/pci-skeleton.c
+++ b/drivers/net/pci-skeleton.c
@@ -78,7 +78,7 @@ that almost all frames will need to be copied to an alignment buffer.
 
 IVb. References
 
-http://www.realtek.com.tw/cn/cn.html
+http://www.realtek.com.tw/
 http://www.scyld.com/expert/NWay.html
 
 IVc. Errata
diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c
index 2807a0fcadc..321b12f8264 100644
--- a/drivers/net/pcmcia/3c574_cs.c
+++ b/drivers/net/pcmcia/3c574_cs.c
@@ -62,7 +62,7 @@ invalid ramWidth is Very Bad.
 V. References
 
 http://www.scyld.com/expert/NWay.html
-http://www.national.com/pf/DP/DP83840.html
+http://www.national.com/opf/DP/DP83840A.html
 
 Thanks to Terry Murphy of 3Com for providing development information for
 earlier 3Com products.
diff --git a/drivers/net/ps3_gelic_net.c b/drivers/net/ps3_gelic_net.c
index 5526ab4895e..5ecfa4b1e75 100644
--- a/drivers/net/ps3_gelic_net.c
+++ b/drivers/net/ps3_gelic_net.c
@@ -642,7 +642,7 @@ static inline void gelic_card_disable_rxdmac(struct gelic_card *card)
 	status = lv1_net_stop_rx_dma(bus_id(card), dev_id(card), 0);
 	if (status)
 		dev_err(ctodev(card),
-			"lv1_net_stop_rx_dma faild, %d\n", status);
+			"lv1_net_stop_rx_dma failed, %d\n", status);
 }
 
 /**
@@ -660,7 +660,7 @@ static inline void gelic_card_disable_txdmac(struct gelic_card *card)
 	status = lv1_net_stop_tx_dma(bus_id(card), dev_id(card), 0);
 	if (status)
 		dev_err(ctodev(card),
-			"lv1_net_stop_tx_dma faild, status=%d\n", status);
+			"lv1_net_stop_tx_dma failed, status=%d\n", status);
 }
 
 /**
diff --git a/drivers/net/sb1250-mac.c b/drivers/net/sb1250-mac.c
index d8249d7653c..d96d2f7a3f1 100644
--- a/drivers/net/sb1250-mac.c
+++ b/drivers/net/sb1250-mac.c
@@ -95,7 +95,7 @@ MODULE_PARM_DESC(int_timeout_rx, "RX timeout value");
 #include <asm/sibyte/sb1250_regs.h>
 #include <asm/sibyte/sb1250_int.h>
 #else
-#error invalid SiByte MAC configuation
+#error invalid SiByte MAC configuration
 #endif
 #include <asm/sibyte/sb1250_scd.h>
 #include <asm/sibyte/sb1250_mac.h>
@@ -106,7 +106,7 @@ MODULE_PARM_DESC(int_timeout_rx, "RX timeout value");
 #elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
 #define UNIT_INT(n)		(K_INT_MAC_0 + (n))
 #else
-#error invalid SiByte MAC configuation
+#error invalid SiByte MAC configuration
 #endif
 
 #ifdef K_INT_PHY
@@ -1568,7 +1568,7 @@ static void sbmac_channel_start(struct sbmac_softc *s)
 		       M_MAC_RX_ENABLE |
 		       M_MAC_TX_ENABLE, s->sbm_macenable);
 #else
-#error invalid SiByte MAC configuation
+#error invalid SiByte MAC configuration
 #endif
 
 #ifdef CONFIG_SBMAC_COALESCE
diff --git a/drivers/net/sc92031.c b/drivers/net/sc92031.c
index 31b92f5f32c..417adf37282 100644
--- a/drivers/net/sc92031.c
+++ b/drivers/net/sc92031.c
@@ -15,7 +15,7 @@
  *  Rewritten for 2.6 by Cesar Eduardo Barros
  *
  *  A datasheet for this chip can be found at
- *  http://www.silan.com.cn/english/products/pdf/SC92031AY.pdf
+ *  http://www.silan.com.cn/english/product/pdf/SC92031AY.pdf 
  */
 
 /* Note about set_mac_address: I don't know how to change the hardware
diff --git a/drivers/net/skfp/hwt.c b/drivers/net/skfp/hwt.c
index e6baa53307c..c0798fd2ca6 100644
--- a/drivers/net/skfp/hwt.c
+++ b/drivers/net/skfp/hwt.c
@@ -221,7 +221,7 @@ u_long hwt_quick_read(struct s_smc *smc)
  * para	start		start time
  *	duration	time to wait
  *
- * NOTE: The fuction will return immediately, if the timer is not 
+ * NOTE: The function will return immediately, if the timer is not
  *	 started
  ************************/
 void hwt_wait_time(struct s_smc *smc, u_long start, long int duration)
diff --git a/drivers/net/skfp/skfddi.c b/drivers/net/skfp/skfddi.c
index ba2e8339fe9..0a66fed52e8 100644
--- a/drivers/net/skfp/skfddi.c
+++ b/drivers/net/skfp/skfddi.c
@@ -33,7 +33,7 @@
  *   The driver architecture is based on the DEC FDDI driver by
  *   Lawrence V. Stefani and several ethernet drivers.
  *   I also used an existing Windows NT miniport driver.
- *   All hardware dependent fuctions are handled by the SysKonnect
+ *   All hardware dependent functions are handled by the SysKonnect
  *   Hardware Module.
  *   The only headerfiles that are directly related to this source
  *   are skfddi.c, h/types.h, h/osdef1st.h, h/targetos.h.
diff --git a/drivers/net/tlan.c b/drivers/net/tlan.c
index ec8c804a795..f8e463cd8ec 100644
--- a/drivers/net/tlan.c
+++ b/drivers/net/tlan.c
@@ -78,7 +78,7 @@
  * 			     - Updated tlan.txt accordingly.
  * 			     - Adjusted minimum/maximum frame length.
  * 			     - There is now a TLAN website up at
- * 			       http://tlan.kernel.dk
+ * 			       http://hp.sourceforge.net/ 
  *
  * 	v1.7 April 07, 2000  - Started to implement custom ioctls. Driver now
  * 			       reports PHY information when used with Donald
diff --git a/drivers/net/tokenring/tms380tr.c b/drivers/net/tokenring/tms380tr.c
index c83f4f6e39e..663b8860a53 100644
--- a/drivers/net/tokenring/tms380tr.c
+++ b/drivers/net/tokenring/tms380tr.c
@@ -5,7 +5,7 @@
  *  Originally sktr.c: Written 1997 by Christoph Goos
  *
  *  A fine result of the Linux Systems Network Architecture Project.
- *  http://www.linux-sna.org
+ *  http://www.vanheusden.com/sna/ 
  *
  *  This software may be used and distributed according to the terms
  *  of the GNU General Public License, incorporated herein by reference.
diff --git a/drivers/net/tulip/Kconfig b/drivers/net/tulip/Kconfig
index f3035951422..1f8d4a8d8ea 100644
--- a/drivers/net/tulip/Kconfig
+++ b/drivers/net/tulip/Kconfig
@@ -151,7 +151,7 @@ config ULI526X
 	select CRC32
 	---help---
 	  This driver is for ULi M5261/M5263 10/100M Ethernet Controller
-	  (<http://www.uli.com.tw/>).
+	  (<http://www.nvidia.com/page/uli_drivers.html>).
 
 	  To compile this driver as a module, choose M here. The module will
 	  be called uli526x.
diff --git a/drivers/net/tulip/pnic2.c b/drivers/net/tulip/pnic2.c
index b8197666021..4690c8e6920 100644
--- a/drivers/net/tulip/pnic2.c
+++ b/drivers/net/tulip/pnic2.c
@@ -59,7 +59,7 @@
  * Bit 14:12 - autonegotiation state (write 001 to start autonegotiate)
  * Bit 3     - Autopolarity state
  * Bit 2     - LS10B - link state of 10baseT 0 - good, 1 - failed
- * Bit 1     - LS100B - link state of 100baseT 0 - good, 1- faild
+ * Bit 1     - LS100B - link state of 100baseT 0 - good, 1 - failed
  *
  *
  * Data Port Selection Info
diff --git a/drivers/net/usb/plusb.c b/drivers/net/usb/plusb.c
index 08555f8b15f..08ad269f6b4 100644
--- a/drivers/net/usb/plusb.c
+++ b/drivers/net/usb/plusb.c
@@ -32,7 +32,7 @@
 
 
 /*
- * Prolific PL-2301/PL-2302 driver ... http://www.prolifictech.com
+ * Prolific PL-2301/PL-2302 driver ... http://www.prolific.com.tw/ 
  *
  * The protocol and handshaking used here should be bug-compatible
  * with the Linux 2.2 "plusb" driver, by Deti Fliegl.
diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
index d08ce6a264c..423eb26386c 100644
--- a/drivers/net/wan/Kconfig
+++ b/drivers/net/wan/Kconfig
@@ -409,7 +409,7 @@ config CYCLADES_SYNC
 	tristate "Cyclom 2X(tm) cards (EXPERIMENTAL)"
 	depends on WAN_ROUTER_DRIVERS && (PCI || ISA)
 	---help---
-	  Cyclom 2X from Cyclades Corporation <http://www.cyclades.com/> is an
+	  Cyclom 2X from Cyclades Corporation <http://www.avocent.com/> is an
 	  intelligent multiprotocol WAN adapter with data transfer rates up to
 	  512 Kbps. These cards support the X.25 and SNA related protocols.
 
diff --git a/drivers/net/wan/hdlc.c b/drivers/net/wan/hdlc.c
index 9937bbab938..5d4bb615ccc 100644
--- a/drivers/net/wan/hdlc.c
+++ b/drivers/net/wan/hdlc.c
@@ -109,7 +109,7 @@ static int hdlc_device_event(struct notifier_block *this, unsigned long event,
 		return NOTIFY_DONE; /* not an HDLC device */
 
 	if (event != NETDEV_CHANGE)
-		return NOTIFY_DONE; /* Only interrested in carrier changes */
+		return NOTIFY_DONE; /* Only interested in carrier changes */
 
 	on = netif_carrier_ok(dev);
 
diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h
index 4a367cdb3eb..308b79e1ff0 100644
--- a/drivers/net/wireless/ath/ath5k/ath5k.h
+++ b/drivers/net/wireless/ath/ath5k/ath5k.h
@@ -348,7 +348,7 @@ struct ath5k_srev_name {
 /*
  * Some of this information is based on Documentation from:
  *
- * http://madwifi.org/wiki/ChipsetFeatures/SuperAG
+ * http://madwifi-project.org/wiki/ChipsetFeatures/SuperAG 
  *
  * Modulation for Atheros' eXtended Range - range enhancing extension that is
  * supposed to double the distance an Atheros client device can keep a
diff --git a/drivers/net/wireless/ath/ath5k/reg.h b/drivers/net/wireless/ath/ath5k/reg.h
index a34929f0653..ca79ecd832f 100644
--- a/drivers/net/wireless/ath/ath5k/reg.h
+++ b/drivers/net/wireless/ath/ath5k/reg.h
@@ -26,7 +26,6 @@
  * Atheros presentations and papers like these:
  *
  * 5210 - http://nova.stanford.edu/~bbaas/ps/isscc2002_slides.pdf
- *        http://www.it.iitb.ac.in/~janak/wifire/01222734.pdf
  *
  * 5211 - http://www.hotchips.org/archives/hc14/3_Tue/16_mcfarland.pdf
  *
diff --git a/drivers/net/wireless/hostap/hostap_hw.c b/drivers/net/wireless/hostap/hostap_hw.c
index e9d9d622a9b..b7cb165d612 100644
--- a/drivers/net/wireless/hostap/hostap_hw.c
+++ b/drivers/net/wireless/hostap/hostap_hw.c
@@ -2621,7 +2621,7 @@ static irqreturn_t prism2_interrupt(int irq, void *dev_id)
 	iface = netdev_priv(dev);
 	local = iface->local;
 
-	/* Detect early interrupt before driver is fully configued */
+	/* Detect early interrupt before driver is fully configured */
 	spin_lock(&local->irq_init_lock);
 	if (!dev->base_addr) {
 		if (net_ratelimit()) {
diff --git a/drivers/net/wireless/p54/Kconfig b/drivers/net/wireless/p54/Kconfig
index e5f45cb2a7a..25f965ffc88 100644
--- a/drivers/net/wireless/p54/Kconfig
+++ b/drivers/net/wireless/p54/Kconfig
@@ -9,7 +9,7 @@ config P54_COMMON
 	  also need to be enabled in order to support any devices.
 
 	  These devices require softmac firmware which can be found at
-	  http://prism54.org/
+	  <http://wireless.kernel.org/en/users/Drivers/p54>
 
 	  If you choose to build a module, it'll be called p54common.
 
@@ -21,7 +21,7 @@ config P54_USB
 	  This driver is for USB isl38xx based wireless cards.
 
 	  These devices require softmac firmware which can be found at
-	  http://prism54.org/
+	  <http://wireless.kernel.org/en/users/Drivers/p54>
 
 	  If you choose to build a module, it'll be called p54usb.
 
@@ -35,7 +35,7 @@ config P54_PCI
 	  supported by the fullmac driver/firmware.
 
 	  This driver requires softmac firmware which can be found at
-	  http://prism54.org/
+	  <http://wireless.kernel.org/en/users/Drivers/p54>
 
 	  If you choose to build a module, it'll be called p54pci.
 
diff --git a/drivers/net/wireless/prism54/islpci_hotplug.c b/drivers/net/wireless/prism54/islpci_hotplug.c
index dc14420a9ad..b5e64d71b7a 100644
--- a/drivers/net/wireless/prism54/islpci_hotplug.c
+++ b/drivers/net/wireless/prism54/islpci_hotplug.c
@@ -38,7 +38,7 @@ module_param(init_pcitm, int, 0);
 /* In this order: vendor, device, subvendor, subdevice, class, class_mask,
  * driver_data
  * If you have an update for this please contact prism54-devel@prism54.org
- * The latest list can be found at http://prism54.org/supported_cards.php */
+ * The latest list can be found at http://wireless.kernel.org/en/users/Drivers/p54 */
 static DEFINE_PCI_DEVICE_TABLE(prism54_id_tbl) = {
 	/* Intersil PRISM Duette/Prism GT Wireless LAN adapter */
 	{