diff options
author | H. Peter Anvin <hpa@zytor.com> | 2010-03-03 13:38:48 -0800 |
---|---|---|
committer | H. Peter Anvin <hpa@zytor.com> | 2010-03-03 13:44:19 -0800 |
commit | c7bbf52aa4fa332b84c4f2bb33e69561ee6870b4 (patch) | |
tree | 5fe882bc5588c86a918934ba134e5ff13ae9cc90 /arch/x86/kernel/apb_timer.c | |
parent | 3010673ef5f7bef4b4685566a0713de1b4306c93 (diff) | |
download | kernel_samsung_smdk4412-c7bbf52aa4fa332b84c4f2bb33e69561ee6870b4.tar.gz kernel_samsung_smdk4412-c7bbf52aa4fa332b84c4f2bb33e69561ee6870b4.tar.bz2 kernel_samsung_smdk4412-c7bbf52aa4fa332b84c4f2bb33e69561ee6870b4.zip |
x86, mrst: Fix whitespace breakage in apb_timer.c
Checkin bb24c4716185f6e116c440462c65c1f56649183b:
"Moorestown APB system timer driver" suffered from severe whitespace
damage in arch/x86/kernel/apb_timer.c due to using Microsoft Lookout
to send a patch. Fix the whitespace breakage.
Reported-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Diffstat (limited to 'arch/x86/kernel/apb_timer.c')
-rw-r--r-- | arch/x86/kernel/apb_timer.c | 1068 |
1 files changed, 534 insertions, 534 deletions
diff --git a/arch/x86/kernel/apb_timer.c b/arch/x86/kernel/apb_timer.c index 6f27f8b7579..2afa27d0129 100644 --- a/arch/x86/kernel/apb_timer.c +++ b/arch/x86/kernel/apb_timer.c @@ -43,11 +43,11 @@ #include <asm/fixmap.h> #include <asm/apb_timer.h> -#define APBT_MASK CLOCKSOURCE_MASK(32) -#define APBT_SHIFT 22 -#define APBT_CLOCKEVENT_RATING 150 -#define APBT_CLOCKSOURCE_RATING 250 -#define APBT_MIN_DELTA_USEC 200 +#define APBT_MASK CLOCKSOURCE_MASK(32) +#define APBT_SHIFT 22 +#define APBT_CLOCKEVENT_RATING 150 +#define APBT_CLOCKSOURCE_RATING 250 +#define APBT_MIN_DELTA_USEC 200 #define EVT_TO_APBT_DEV(evt) container_of(evt, struct apbt_dev, evt) #define APBT_CLOCKEVENT0_NUM (0) @@ -65,21 +65,21 @@ static int phy_cs_timer_id; static uint64_t apbt_freq; static void apbt_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt); + struct clock_event_device *evt); static int apbt_next_event(unsigned long delta, - struct clock_event_device *evt); + struct clock_event_device *evt); static cycle_t apbt_read_clocksource(struct clocksource *cs); static void apbt_restart_clocksource(void); struct apbt_dev { - struct clock_event_device evt; - unsigned int num; - int cpu; - unsigned int irq; - unsigned int tick; - unsigned int count; - unsigned int flags; - char name[10]; + struct clock_event_device evt; + unsigned int num; + int cpu; + unsigned int irq; + unsigned int tick; + unsigned int count; + unsigned int flags; + char name[10]; }; int disable_apbt_percpu __cpuinitdata; @@ -91,77 +91,77 @@ static unsigned int apbt_num_timers_used; static struct apbt_dev *apbt_devs; #endif -static inline unsigned long apbt_readl_reg(unsigned long a) +static inline unsigned long apbt_readl_reg(unsigned long a) { - return readl(apbt_virt_address + a); + return readl(apbt_virt_address + a); } static inline void apbt_writel_reg(unsigned long d, unsigned long a) { - writel(d, apbt_virt_address + a); + writel(d, apbt_virt_address + a); } static inline unsigned long apbt_readl(int n, unsigned long a) { - return readl(apbt_virt_address + a + n * APBTMRS_REG_SIZE); + return readl(apbt_virt_address + a + n * APBTMRS_REG_SIZE); } static inline void apbt_writel(int n, unsigned long d, unsigned long a) { - writel(d, apbt_virt_address + a + n * APBTMRS_REG_SIZE); + writel(d, apbt_virt_address + a + n * APBTMRS_REG_SIZE); } static inline void apbt_set_mapping(void) { - struct sfi_timer_table_entry *mtmr; - - if (apbt_virt_address) { - pr_debug("APBT base already mapped\n"); - return; - } - mtmr = sfi_get_mtmr(APBT_CLOCKEVENT0_NUM); - if (mtmr == NULL) { - printk(KERN_ERR "Failed to get MTMR %d from SFI\n", - APBT_CLOCKEVENT0_NUM); - return; - } - apbt_address = (unsigned long)mtmr->phys_addr; - if (!apbt_address) { - printk(KERN_WARNING "No timer base from SFI, use default\n"); - apbt_address = APBT_DEFAULT_BASE; - } - apbt_virt_address = ioremap_nocache(apbt_address, APBT_MMAP_SIZE); - if (apbt_virt_address) { - pr_debug("Mapped APBT physical addr %p at virtual addr %p\n",\ - (void *)apbt_address, (void *)apbt_virt_address); - } else { - pr_debug("Failed mapping APBT phy address at %p\n",\ - (void *)apbt_address); - goto panic_noapbt; - } - apbt_freq = mtmr->freq_hz / USEC_PER_SEC; - sfi_free_mtmr(mtmr); - - /* Now figure out the physical timer id for clocksource device */ - mtmr = sfi_get_mtmr(APBT_CLOCKSOURCE_NUM); - if (mtmr == NULL) - goto panic_noapbt; - - /* Now figure out the physical timer id */ - phy_cs_timer_id = (unsigned int)(mtmr->phys_addr & 0xff) - / APBTMRS_REG_SIZE; - pr_debug("Use timer %d for clocksource\n", phy_cs_timer_id); - return; + struct sfi_timer_table_entry *mtmr; + + if (apbt_virt_address) { + pr_debug("APBT base already mapped\n"); + return; + } + mtmr = sfi_get_mtmr(APBT_CLOCKEVENT0_NUM); + if (mtmr == NULL) { + printk(KERN_ERR "Failed to get MTMR %d from SFI\n", + APBT_CLOCKEVENT0_NUM); + return; + } + apbt_address = (unsigned long)mtmr->phys_addr; + if (!apbt_address) { + printk(KERN_WARNING "No timer base from SFI, use default\n"); + apbt_address = APBT_DEFAULT_BASE; + } + apbt_virt_address = ioremap_nocache(apbt_address, APBT_MMAP_SIZE); + if (apbt_virt_address) { + pr_debug("Mapped APBT physical addr %p at virtual addr %p\n",\ + (void *)apbt_address, (void *)apbt_virt_address); + } else { + pr_debug("Failed mapping APBT phy address at %p\n",\ + (void *)apbt_address); + goto panic_noapbt; + } + apbt_freq = mtmr->freq_hz / USEC_PER_SEC; + sfi_free_mtmr(mtmr); + + /* Now figure out the physical timer id for clocksource device */ + mtmr = sfi_get_mtmr(APBT_CLOCKSOURCE_NUM); + if (mtmr == NULL) + goto panic_noapbt; + + /* Now figure out the physical timer id */ + phy_cs_timer_id = (unsigned int)(mtmr->phys_addr & 0xff) + / APBTMRS_REG_SIZE; + pr_debug("Use timer %d for clocksource\n", phy_cs_timer_id); + return; panic_noapbt: - panic("Failed to setup APB system timer\n"); + panic("Failed to setup APB system timer\n"); } static inline void apbt_clear_mapping(void) { - iounmap(apbt_virt_address); - apbt_virt_address = NULL; + iounmap(apbt_virt_address); + apbt_virt_address = NULL; } /* @@ -169,28 +169,28 @@ static inline void apbt_clear_mapping(void) */ static inline int is_apbt_capable(void) { - return apbt_virt_address ? 1 : 0; + return apbt_virt_address ? 1 : 0; } static struct clocksource clocksource_apbt = { - .name = "apbt", - .rating = APBT_CLOCKSOURCE_RATING, - .read = apbt_read_clocksource, - .mask = APBT_MASK, - .shift = APBT_SHIFT, - .flags = CLOCK_SOURCE_IS_CONTINUOUS, - .resume = apbt_restart_clocksource, + .name = "apbt", + .rating = APBT_CLOCKSOURCE_RATING, + .read = apbt_read_clocksource, + .mask = APBT_MASK, + .shift = APBT_SHIFT, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, + .resume = apbt_restart_clocksource, }; /* boot APB clock event device */ static struct clock_event_device apbt_clockevent = { - .name = "apbt0", - .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .set_mode = apbt_set_mode, - .set_next_event = apbt_next_event, - .shift = APBT_SHIFT, - .irq = 0, - .rating = APBT_CLOCKEVENT_RATING, + .name = "apbt0", + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .set_mode = apbt_set_mode, + .set_next_event = apbt_next_event, + .shift = APBT_SHIFT, + .irq = 0, + .rating = APBT_CLOCKEVENT_RATING, }; /* @@ -199,20 +199,20 @@ static struct clock_event_device apbt_clockevent = { */ static inline int __init setup_x86_mrst_timer(char *arg) { - if (!arg) - return -EINVAL; - - if (strcmp("apbt_only", arg) == 0) - disable_apbt_percpu = 0; - else if (strcmp("lapic_and_apbt", arg) == 0) - disable_apbt_percpu = 1; - else { - pr_warning("X86 MRST timer option %s not recognised" - " use x86_mrst_timer=apbt_only or lapic_and_apbt\n", - arg); - return -EINVAL; - } - return 0; + if (!arg) + return -EINVAL; + + if (strcmp("apbt_only", arg) == 0) + disable_apbt_percpu = 0; + else if (strcmp("lapic_and_apbt", arg) == 0) + disable_apbt_percpu = 1; + else { + pr_warning("X86 MRST timer option %s not recognised" + " use x86_mrst_timer=apbt_only or lapic_and_apbt\n", + arg); + return -EINVAL; + } + return 0; } __setup("x86_mrst_timer=", setup_x86_mrst_timer); @@ -222,176 +222,176 @@ __setup("x86_mrst_timer=", setup_x86_mrst_timer); */ static void apbt_start_counter(int n) { - unsigned long ctrl = apbt_readl(n, APBTMR_N_CONTROL); - - ctrl &= ~APBTMR_CONTROL_ENABLE; - apbt_writel(n, ctrl, APBTMR_N_CONTROL); - apbt_writel(n, ~0, APBTMR_N_LOAD_COUNT); - /* enable, mask interrupt */ - ctrl &= ~APBTMR_CONTROL_MODE_PERIODIC; - ctrl |= (APBTMR_CONTROL_ENABLE | APBTMR_CONTROL_INT); - apbt_writel(n, ctrl, APBTMR_N_CONTROL); - /* read it once to get cached counter value initialized */ - apbt_read_clocksource(&clocksource_apbt); + unsigned long ctrl = apbt_readl(n, APBTMR_N_CONTROL); + + ctrl &= ~APBTMR_CONTROL_ENABLE; + apbt_writel(n, ctrl, APBTMR_N_CONTROL); + apbt_writel(n, ~0, APBTMR_N_LOAD_COUNT); + /* enable, mask interrupt */ + ctrl &= ~APBTMR_CONTROL_MODE_PERIODIC; + ctrl |= (APBTMR_CONTROL_ENABLE | APBTMR_CONTROL_INT); + apbt_writel(n, ctrl, APBTMR_N_CONTROL); + /* read it once to get cached counter value initialized */ + apbt_read_clocksource(&clocksource_apbt); } static irqreturn_t apbt_interrupt_handler(int irq, void *data) { - struct apbt_dev *dev = (struct apbt_dev *)data; - struct clock_event_device *aevt = &dev->evt; - - if (!aevt->event_handler) { - printk(KERN_INFO "Spurious APBT timer interrupt on %d\n", - dev->num); - return IRQ_NONE; - } - aevt->event_handler(aevt); - return IRQ_HANDLED; + struct apbt_dev *dev = (struct apbt_dev *)data; + struct clock_event_device *aevt = &dev->evt; + + if (!aevt->event_handler) { + printk(KERN_INFO "Spurious APBT timer interrupt on %d\n", + dev->num); + return IRQ_NONE; + } + aevt->event_handler(aevt); + return IRQ_HANDLED; } static void apbt_restart_clocksource(void) { - apbt_start_counter(phy_cs_timer_id); + apbt_start_counter(phy_cs_timer_id); } /* Setup IRQ routing via IOAPIC */ #ifdef CONFIG_SMP static void apbt_setup_irq(struct apbt_dev *adev) { - struct irq_chip *chip; - struct irq_desc *desc; - - /* timer0 irq has been setup early */ - if (adev->irq == 0) - return; - desc = irq_to_desc(adev->irq); - chip = get_irq_chip(adev->irq); - disable_irq(adev->irq); - desc->status |= IRQ_MOVE_PCNTXT; - irq_set_affinity(adev->irq, cpumask_of(adev->cpu)); - /* APB timer irqs are set up as mp_irqs, timer is edge triggerred */ - set_irq_chip_and_handler_name(adev->irq, chip, handle_edge_irq, "edge"); - enable_irq(adev->irq); - if (system_state == SYSTEM_BOOTING) - if (request_irq(adev->irq, apbt_interrupt_handler, - IRQF_TIMER | IRQF_DISABLED | IRQF_NOBALANCING, - adev->name, adev)) { - printk(KERN_ERR "Failed request IRQ for APBT%d\n", - adev->num); - } + struct irq_chip *chip; + struct irq_desc *desc; + + /* timer0 irq has been setup early */ + if (adev->irq == 0) + return; + desc = irq_to_desc(adev->irq); + chip = get_irq_chip(adev->irq); + disable_irq(adev->irq); + desc->status |= IRQ_MOVE_PCNTXT; + irq_set_affinity(adev->irq, cpumask_of(adev->cpu)); + /* APB timer irqs are set up as mp_irqs, timer is edge triggerred */ + set_irq_chip_and_handler_name(adev->irq, chip, handle_edge_irq, "edge"); + enable_irq(adev->irq); + if (system_state == SYSTEM_BOOTING) + if (request_irq(adev->irq, apbt_interrupt_handler, + IRQF_TIMER | IRQF_DISABLED | IRQF_NOBALANCING, + adev->name, adev)) { + printk(KERN_ERR "Failed request IRQ for APBT%d\n", + adev->num); + } } #endif static void apbt_enable_int(int n) { - unsigned long ctrl = apbt_readl(n, APBTMR_N_CONTROL); - /* clear pending intr */ - apbt_readl(n, APBTMR_N_EOI); - ctrl &= ~APBTMR_CONTROL_INT; - apbt_writel(n, ctrl, APBTMR_N_CONTROL); + unsigned long ctrl = apbt_readl(n, APBTMR_N_CONTROL); + /* clear pending intr */ + apbt_readl(n, APBTMR_N_EOI); + ctrl &= ~APBTMR_CONTROL_INT; + apbt_writel(n, ctrl, APBTMR_N_CONTROL); } static void apbt_disable_int(int n) { - unsigned long ctrl = apbt_readl(n, APBTMR_N_CONTROL); + unsigned long ctrl = apbt_readl(n, APBTMR_N_CONTROL); - ctrl |= APBTMR_CONTROL_INT; - apbt_writel(n, ctrl, APBTMR_N_CONTROL); + ctrl |= APBTMR_CONTROL_INT; + apbt_writel(n, ctrl, APBTMR_N_CONTROL); } static int __init apbt_clockevent_register(void) { - struct sfi_timer_table_entry *mtmr; - struct apbt_dev *adev = &__get_cpu_var(cpu_apbt_dev); - - mtmr = sfi_get_mtmr(APBT_CLOCKEVENT0_NUM); - if (mtmr == NULL) { - printk(KERN_ERR "Failed to get MTMR %d from SFI\n", - APBT_CLOCKEVENT0_NUM); - return -ENODEV; - } - - /* - * We need to calculate the scaled math multiplication factor for - * nanosecond to apbt tick conversion. - * mult = (nsec/cycle)*2^APBT_SHIFT - */ - apbt_clockevent.mult = div_sc((unsigned long) mtmr->freq_hz - , NSEC_PER_SEC, APBT_SHIFT); - - /* Calculate the min / max delta */ - apbt_clockevent.max_delta_ns = clockevent_delta2ns(0x7FFFFFFF, - &apbt_clockevent); - apbt_clockevent.min_delta_ns = clockevent_delta2ns( - APBT_MIN_DELTA_USEC*apbt_freq, - &apbt_clockevent); - /* - * Start apbt with the boot cpu mask and make it - * global if not used for per cpu timer. - */ - apbt_clockevent.cpumask = cpumask_of(smp_processor_id()); - adev->num = smp_processor_id(); - memcpy(&adev->evt, &apbt_clockevent, sizeof(struct clock_event_device)); - - if (disable_apbt_percpu) { - apbt_clockevent.rating = APBT_CLOCKEVENT_RATING - 100; + struct sfi_timer_table_entry *mtmr; + struct apbt_dev *adev = &__get_cpu_var(cpu_apbt_dev); + + mtmr = sfi_get_mtmr(APBT_CLOCKEVENT0_NUM); + if (mtmr == NULL) { + printk(KERN_ERR "Failed to get MTMR %d from SFI\n", + APBT_CLOCKEVENT0_NUM); + return -ENODEV; + } + + /* + * We need to calculate the scaled math multiplication factor for + * nanosecond to apbt tick conversion. + * mult = (nsec/cycle)*2^APBT_SHIFT + */ + apbt_clockevent.mult = div_sc((unsigned long) mtmr->freq_hz + , NSEC_PER_SEC, APBT_SHIFT); + + /* Calculate the min / max delta */ + apbt_clockevent.max_delta_ns = clockevent_delta2ns(0x7FFFFFFF, + &apbt_clockevent); + apbt_clockevent.min_delta_ns = clockevent_delta2ns( + APBT_MIN_DELTA_USEC*apbt_freq, + &apbt_clockevent); + /* + * Start apbt with the boot cpu mask and make it + * global if not used for per cpu timer. + */ + apbt_clockevent.cpumask = cpumask_of(smp_processor_id()); + adev->num = smp_processor_id(); + memcpy(&adev->evt, &apbt_clockevent, sizeof(struct clock_event_device)); + + if (disable_apbt_percpu) { + apbt_clockevent.rating = APBT_CLOCKEVENT_RATING - 100; global_clock_event = &adev->evt; - printk(KERN_DEBUG "%s clockevent registered as global\n", - global_clock_event->name); - } - - if (request_irq(apbt_clockevent.irq, apbt_interrupt_handler, - IRQF_TIMER | IRQF_DISABLED | IRQF_NOBALANCING, - apbt_clockevent.name, adev)) { - printk(KERN_ERR "Failed request IRQ for APBT%d\n", - apbt_clockevent.irq); - } - - clockevents_register_device(&adev->evt); - /* Start APBT 0 interrupts */ - apbt_enable_int(APBT_CLOCKEVENT0_NUM); - - sfi_free_mtmr(mtmr); - return 0; + printk(KERN_DEBUG "%s clockevent registered as global\n", + global_clock_event->name); + } + + if (request_irq(apbt_clockevent.irq, apbt_interrupt_handler, + IRQF_TIMER | IRQF_DISABLED | IRQF_NOBALANCING, + apbt_clockevent.name, adev)) { + printk(KERN_ERR "Failed request IRQ for APBT%d\n", + apbt_clockevent.irq); + } + + clockevents_register_device(&adev->evt); + /* Start APBT 0 interrupts */ + apbt_enable_int(APBT_CLOCKEVENT0_NUM); + + sfi_free_mtmr(mtmr); + return 0; } #ifdef CONFIG_SMP /* Should be called with per cpu */ void apbt_setup_secondary_clock(void) { - struct apbt_dev *adev; - struct clock_event_device *aevt; - int cpu; - - /* Don't register boot CPU clockevent */ - cpu = smp_processor_id(); - if (cpu == boot_cpu_id) - return; - /* - * We need to calculate the scaled math multiplication factor for - * nanosecond to apbt tick conversion. - * mult = (nsec/cycle)*2^APBT_SHIFT - */ - printk(KERN_INFO "Init per CPU clockevent %d\n", cpu); - adev = &per_cpu(cpu_apbt_dev, cpu); - aevt = &adev->evt; - - memcpy(aevt, &apbt_clockevent, sizeof(*aevt)); - aevt->cpumask = cpumask_of(cpu); - aevt->name = adev->name; - aevt->mode = CLOCK_EVT_MODE_UNUSED; - - printk(KERN_INFO "Registering CPU %d clockevent device %s, mask %08x\n", - cpu, aevt->name, *(u32 *)aevt->cpumask); - - apbt_setup_irq(adev); - - clockevents_register_device(aevt); - - apbt_enable_int(cpu); - - return; + struct apbt_dev *adev; + struct clock_event_device *aevt; + int cpu; + + /* Don't register boot CPU clockevent */ + cpu = smp_processor_id(); + if (cpu == boot_cpu_id) + return; + /* + * We need to calculate the scaled math multiplication factor for + * nanosecond to apbt tick conversion. + * mult = (nsec/cycle)*2^APBT_SHIFT + */ + printk(KERN_INFO "Init per CPU clockevent %d\n", cpu); + adev = &per_cpu(cpu_apbt_dev, cpu); + aevt = &adev->evt; + + memcpy(aevt, &apbt_clockevent, sizeof(*aevt)); + aevt->cpumask = cpumask_of(cpu); + aevt->name = adev->name; + aevt->mode = CLOCK_EVT_MODE_UNUSED; + + printk(KERN_INFO "Registering CPU %d clockevent device %s, mask %08x\n", + cpu, aevt->name, *(u32 *)aevt->cpumask); + + apbt_setup_irq(adev); + + clockevents_register_device(aevt); + + apbt_enable_int(cpu); + + return; } /* @@ -405,34 +405,34 @@ void apbt_setup_secondary_clock(void) * the extra interrupt is harmless. */ static int apbt_cpuhp_notify(struct notifier_block *n, - unsigned long action, void *hcpu) + unsigned long action, void *hcpu) { - unsigned long cpu = (unsigned long)hcpu; - struct apbt_dev *adev = &per_cpu(cpu_apbt_dev, cpu); - - switch (action & 0xf) { - case CPU_DEAD: - apbt_disable_int(cpu); - if (system_state == SYSTEM_RUNNING) - pr_debug("skipping APBT CPU %lu offline\n", cpu); - else if (adev) { - pr_debug("APBT clockevent for cpu %lu offline\n", cpu); - free_irq(adev->irq, adev); - } - break; - default: - pr_debug(KERN_INFO "APBT notified %lu, no action\n", action); - } - return NOTIFY_OK; + unsigned long cpu = (unsigned long)hcpu; + struct apbt_dev *adev = &per_cpu(cpu_apbt_dev, cpu); + + switch (action & 0xf) { + case CPU_DEAD: + apbt_disable_int(cpu); + if (system_state == SYSTEM_RUNNING) + pr_debug("skipping APBT CPU %lu offline\n", cpu); + else if (adev) { + pr_debug("APBT clockevent for cpu %lu offline\n", cpu); + free_irq(adev->irq, adev); + } + break; + default: + pr_debug(KERN_INFO "APBT notified %lu, no action\n", action); + } + return NOTIFY_OK; } static __init int apbt_late_init(void) { - if (disable_apbt_percpu) - return 0; - /* This notifier should be called after workqueue is ready */ - hotcpu_notifier(apbt_cpuhp_notify, -20); - return 0; + if (disable_apbt_percpu) + return 0; + /* This notifier should be called after workqueue is ready */ + hotcpu_notifier(apbt_cpuhp_notify, -20); + return 0; } fs_initcall(apbt_late_init); #else @@ -442,93 +442,93 @@ void apbt_setup_secondary_clock(void) {} #endif /* CONFIG_SMP */ static void apbt_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt) + struct clock_event_device *evt) { - unsigned long ctrl; - uint64_t delta; - int timer_num; - struct apbt_dev *adev = EVT_TO_APBT_DEV(evt); - - timer_num = adev->num; - pr_debug("%s CPU %d timer %d mode=%d\n", - __func__, first_cpu(*evt->cpumask), timer_num, mode); - - switch (mode) { - case CLOCK_EVT_MODE_PERIODIC: - delta = ((uint64_t)(NSEC_PER_SEC/HZ)) * apbt_clockevent.mult; - delta >>= apbt_clockevent.shift; - ctrl = apbt_readl(timer_num, APBTMR_N_CONTROL); - ctrl |= APBTMR_CONTROL_MODE_PERIODIC; - apbt_writel(timer_num, ctrl, APBTMR_N_CONTROL); - /* - * DW APB p. 46, have to disable timer before load counter, - * may cause sync problem. - */ - ctrl &= ~APBTMR_CONTROL_ENABLE; - apbt_writel(timer_num, ctrl, APBTMR_N_CONTROL); - udelay(1); - pr_debug("Setting clock period %d for HZ %d\n", (int)delta, HZ); - apbt_writel(timer_num, delta, APBTMR_N_LOAD_COUNT); - ctrl |= APBTMR_CONTROL_ENABLE; - apbt_writel(timer_num, ctrl, APBTMR_N_CONTROL); - break; - /* APB timer does not have one-shot mode, use free running mode */ - case CLOCK_EVT_MODE_ONESHOT: - ctrl = apbt_readl(timer_num, APBTMR_N_CONTROL); - /* - * set free running mode, this mode will let timer reload max - * timeout which will give time (3min on 25MHz clock) to rearm - * the next event, therefore emulate the one-shot mode. - */ - ctrl &= ~APBTMR_CONTROL_ENABLE; - ctrl &= ~APBTMR_CONTROL_MODE_PERIODIC; - - apbt_writel(timer_num, ctrl, APBTMR_N_CONTROL); - /* write again to set free running mode */ - apbt_writel(timer_num, ctrl, APBTMR_N_CONTROL); - - /* - * DW APB p. 46, load counter with all 1s before starting free - * running mode. - */ - apbt_writel(timer_num, ~0, APBTMR_N_LOAD_COUNT); - ctrl &= ~APBTMR_CONTROL_INT; - ctrl |= APBTMR_CONTROL_ENABLE; - apbt_writel(timer_num, ctrl, APBTMR_N_CONTROL); - break; - - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_SHUTDOWN: - apbt_disable_int(timer_num); - ctrl = apbt_readl(timer_num, APBTMR_N_CONTROL); - ctrl &= ~APBTMR_CONTROL_ENABLE; - apbt_writel(timer_num, ctrl, APBTMR_N_CONTROL); - break; - - case CLOCK_EVT_MODE_RESUME: - apbt_enable_int(timer_num); - break; - } + unsigned long ctrl; + uint64_t delta; + int timer_num; + struct apbt_dev *adev = EVT_TO_APBT_DEV(evt); + + timer_num = adev->num; + pr_debug("%s CPU %d timer %d mode=%d\n", + __func__, first_cpu(*evt->cpumask), timer_num, mode); + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + delta = ((uint64_t)(NSEC_PER_SEC/HZ)) * apbt_clockevent.mult; + delta >>= apbt_clockevent.shift; + ctrl = apbt_readl(timer_num, APBTMR_N_CONTROL); + ctrl |= APBTMR_CONTROL_MODE_PERIODIC; + apbt_writel(timer_num, ctrl, APBTMR_N_CONTROL); + /* + * DW APB p. 46, have to disable timer before load counter, + * may cause sync problem. + */ + ctrl &= ~APBTMR_CONTROL_ENABLE; + apbt_writel(timer_num, ctrl, APBTMR_N_CONTROL); + udelay(1); + pr_debug("Setting clock period %d for HZ %d\n", (int)delta, HZ); + apbt_writel(timer_num, delta, APBTMR_N_LOAD_COUNT); + ctrl |= APBTMR_CONTROL_ENABLE; + apbt_writel(timer_num, ctrl, APBTMR_N_CONTROL); + break; + /* APB timer does not have one-shot mode, use free running mode */ + case CLOCK_EVT_MODE_ONESHOT: + ctrl = apbt_readl(timer_num, APBTMR_N_CONTROL); + /* + * set free running mode, this mode will let timer reload max + * timeout which will give time (3min on 25MHz clock) to rearm + * the next event, therefore emulate the one-shot mode. + */ + ctrl &= ~APBTMR_CONTROL_ENABLE; + ctrl &= ~APBTMR_CONTROL_MODE_PERIODIC; + + apbt_writel(timer_num, ctrl, APBTMR_N_CONTROL); + /* write again to set free running mode */ + apbt_writel(timer_num, ctrl, APBTMR_N_CONTROL); + + /* + * DW APB p. 46, load counter with all 1s before starting free + * running mode. + */ + apbt_writel(timer_num, ~0, APBTMR_N_LOAD_COUNT); + ctrl &= ~APBTMR_CONTROL_INT; + ctrl |= APBTMR_CONTROL_ENABLE; + apbt_writel(timer_num, ctrl, APBTMR_N_CONTROL); + break; + + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + apbt_disable_int(timer_num); + ctrl = apbt_readl(timer_num, APBTMR_N_CONTROL); + ctrl &= ~APBTMR_CONTROL_ENABLE; + apbt_writel(timer_num, ctrl, APBTMR_N_CONTROL); + break; + + case CLOCK_EVT_MODE_RESUME: + apbt_enable_int(timer_num); + break; + } } static int apbt_next_event(unsigned long delta, - struct clock_event_device *evt) + struct clock_event_device *evt) { - unsigned long ctrl; - int timer_num; - - struct apbt_dev *adev = EVT_TO_APBT_DEV(evt); - - timer_num = adev->num; - /* Disable timer */ - ctrl = apbt_readl(timer_num, APBTMR_N_CONTROL); - ctrl &= ~APBTMR_CONTROL_ENABLE; - apbt_writel(timer_num, ctrl, APBTMR_N_CONTROL); - /* write new count */ - apbt_writel(timer_num, delta, APBTMR_N_LOAD_COUNT); - ctrl |= APBTMR_CONTROL_ENABLE; - apbt_writel(timer_num, ctrl, APBTMR_N_CONTROL); - return 0; + unsigned long ctrl; + int timer_num; + + struct apbt_dev *adev = EVT_TO_APBT_DEV(evt); + + timer_num = adev->num; + /* Disable timer */ + ctrl = apbt_readl(timer_num, APBTMR_N_CONTROL); + ctrl &= ~APBTMR_CONTROL_ENABLE; + apbt_writel(timer_num, ctrl, APBTMR_N_CONTROL); + /* write new count */ + apbt_writel(timer_num, delta, APBTMR_N_LOAD_COUNT); + ctrl |= APBTMR_CONTROL_ENABLE; + apbt_writel(timer_num, ctrl, APBTMR_N_CONTROL); + return 0; } /* @@ -540,94 +540,94 @@ static int apbt_next_event(unsigned long delta, */ static cycle_t apbt_read_clocksource(struct clocksource *cs) { - unsigned long t0, t1, t2; - static unsigned long last_read; + unsigned long t0, t1, t2; + static unsigned long last_read; bad_count: - t1 = apbt_readl(phy_cs_timer_id, - APBTMR_N_CURRENT_VALUE); - t2 = apbt_readl(phy_cs_timer_id, - APBTMR_N_CURRENT_VALUE); - if (unlikely(t1 < t2)) { - pr_debug("APBT: read current count error %lx:%lx:%lx\n", - t1, t2, t2 - t1); - goto bad_count; - } - /* - * check against cached last read, makes sure time does not go back. - * it could be a normal rollover but we will do tripple check anyway - */ - if (unlikely(t2 > last_read)) { - /* check if we have a normal rollover */ - unsigned long raw_intr_status = - apbt_readl_reg(APBTMRS_RAW_INT_STATUS); - /* - * cs timer interrupt is masked but raw intr bit is set if - * rollover occurs. then we read EOI reg to clear it. - */ - if (raw_intr_status & (1 << phy_cs_timer_id)) { - apbt_readl(phy_cs_timer_id, APBTMR_N_EOI); - goto out; - } - pr_debug("APB CS going back %lx:%lx:%lx ", - t2, last_read, t2 - last_read); + t1 = apbt_readl(phy_cs_timer_id, + APBTMR_N_CURRENT_VALUE); + t2 = apbt_readl(phy_cs_timer_id, + APBTMR_N_CURRENT_VALUE); + if (unlikely(t1 < t2)) { + pr_debug("APBT: read current count error %lx:%lx:%lx\n", + t1, t2, t2 - t1); + goto bad_count; + } + /* + * check against cached last read, makes sure time does not go back. + * it could be a normal rollover but we will do tripple check anyway + */ + if (unlikely(t2 > last_read)) { + /* check if we have a normal rollover */ + unsigned long raw_intr_status = + apbt_readl_reg(APBTMRS_RAW_INT_STATUS); + /* + * cs timer interrupt is masked but raw intr bit is set if + * rollover occurs. then we read EOI reg to clear it. + */ + if (raw_intr_status & (1 << phy_cs_timer_id)) { + apbt_readl(phy_cs_timer_id, APBTMR_N_EOI); + goto out; + } + pr_debug("APB CS going back %lx:%lx:%lx ", + t2, last_read, t2 - last_read); bad_count_x3: - pr_debug(KERN_INFO "tripple check enforced\n"); - t0 = apbt_readl(phy_cs_timer_id, - APBTMR_N_CURRENT_VALUE); - udelay(1); - t1 = apbt_readl(phy_cs_timer_id, - APBTMR_N_CURRENT_VALUE); - udelay(1); - t2 = apbt_readl(phy_cs_timer_id, - APBTMR_N_CURRENT_VALUE); - if ((t2 > t1) || (t1 > t0)) { - printk(KERN_ERR "Error: APB CS tripple check failed\n"); - goto bad_count_x3; - } - } + pr_debug(KERN_INFO "tripple check enforced\n"); + t0 = apbt_readl(phy_cs_timer_id, + APBTMR_N_CURRENT_VALUE); + udelay(1); + t1 = apbt_readl(phy_cs_timer_id, + APBTMR_N_CURRENT_VALUE); + udelay(1); + t2 = apbt_readl(phy_cs_timer_id, + APBTMR_N_CURRENT_VALUE); + if ((t2 > t1) || (t1 > t0)) { + printk(KERN_ERR "Error: APB CS tripple check failed\n"); + goto bad_count_x3; + } + } out: - last_read = t2; - return (cycle_t)~t2; + last_read = t2; + return (cycle_t)~t2; } static int apbt_clocksource_register(void) { - u64 start, now; - cycle_t t1; - - /* Start the counter, use timer 2 as source, timer 0/1 for event */ - apbt_start_counter(phy_cs_timer_id); - - /* Verify whether apbt counter works */ - t1 = apbt_read_clocksource(&clocksource_apbt); - rdtscll(start); - - /* - * We don't know the TSC frequency yet, but waiting for - * 200000 TSC cycles is safe: - * 4 GHz == 50us - * 1 GHz == 200us - */ - do { - rep_nop(); - rdtscll(now); - } while ((now - start) < 200000UL); - - /* APBT is the only always on clocksource, it has to work! */ - if (t1 == apbt_read_clocksource(&clocksource_apbt)) - panic("APBT counter not counting. APBT disabled\n"); - - /* - * initialize and register APBT clocksource - * convert that to ns/clock cycle - * mult = (ns/c) * 2^APBT_SHIFT - */ - clocksource_apbt.mult = div_sc(MSEC_PER_SEC, - (unsigned long) apbt_freq, APBT_SHIFT); - clocksource_register(&clocksource_apbt); - - return 0; + u64 start, now; + cycle_t t1; + + /* Start the counter, use timer 2 as source, timer 0/1 for event */ + apbt_start_counter(phy_cs_timer_id); + + /* Verify whether apbt counter works */ + t1 = apbt_read_clocksource(&clocksource_apbt); + rdtscll(start); + + /* + * We don't know the TSC frequency yet, but waiting for + * 200000 TSC cycles is safe: + * 4 GHz == 50us + * 1 GHz == 200us + */ + do { + rep_nop(); + rdtscll(now); + } while ((now - start) < 200000UL); + + /* APBT is the only always on clocksource, it has to work! */ + if (t1 == apbt_read_clocksource(&clocksource_apbt)) + panic("APBT counter not counting. APBT disabled\n"); + + /* + * initialize and register APBT clocksource + * convert that to ns/clock cycle + * mult = (ns/c) * 2^APBT_SHIFT + */ + clocksource_apbt.mult = div_sc(MSEC_PER_SEC, + (unsigned long) apbt_freq, APBT_SHIFT); + clocksource_register(&clocksource_apbt); + + return 0; } /* @@ -640,145 +640,145 @@ static int apbt_clocksource_register(void) void __init apbt_time_init(void) { #ifdef CONFIG_SMP - int i; - struct sfi_timer_table_entry *p_mtmr; - unsigned int percpu_timer; - struct apbt_dev *adev; + int i; + struct sfi_timer_table_entry *p_mtmr; + unsigned int percpu_timer; + struct apbt_dev *adev; #endif - if (apb_timer_block_enabled) - return; - apbt_set_mapping(); - if (apbt_virt_address) { - pr_debug("Found APBT version 0x%lx\n",\ - apbt_readl_reg(APBTMRS_COMP_VERSION)); - } else - goto out_noapbt; - /* - * Read the frequency and check for a sane value, for ESL model - * we extend the possible clock range to allow time scaling. - */ - - if (apbt_freq < APBT_MIN_FREQ || apbt_freq > APBT_MAX_FREQ) { - pr_debug("APBT has invalid freq 0x%llx\n", apbt_freq); - goto out_noapbt; - } - if (apbt_clocksource_register()) { - pr_debug("APBT has failed to register clocksource\n"); - goto out_noapbt; - } - if (!apbt_clockevent_register()) - apb_timer_block_enabled = 1; - else { - pr_debug("APBT has failed to register clockevent\n"); - goto out_noapbt; - } + if (apb_timer_block_enabled) + return; + apbt_set_mapping(); + if (apbt_virt_address) { + pr_debug("Found APBT version 0x%lx\n",\ + apbt_readl_reg(APBTMRS_COMP_VERSION)); + } else + goto out_noapbt; + /* + * Read the frequency and check for a sane value, for ESL model + * we extend the possible clock range to allow time scaling. + */ + + if (apbt_freq < APBT_MIN_FREQ || apbt_freq > APBT_MAX_FREQ) { + pr_debug("APBT has invalid freq 0x%llx\n", apbt_freq); + goto out_noapbt; + } + if (apbt_clocksource_register()) { + pr_debug("APBT has failed to register clocksource\n"); + goto out_noapbt; + } + if (!apbt_clockevent_register()) + apb_timer_block_enabled = 1; + else { + pr_debug("APBT has failed to register clockevent\n"); + goto out_noapbt; + } #ifdef CONFIG_SMP - /* kernel cmdline disable apb timer, so we will use lapic timers */ - if (disable_apbt_percpu) { - printk(KERN_INFO "apbt: disabled per cpu timer\n"); - return; - } - pr_debug("%s: %d CPUs online\n", __func__, num_online_cpus()); - if (num_possible_cpus() <= sfi_mtimer_num) { - percpu_timer = 1; - apbt_num_timers_used = num_possible_cpus(); - } else { - percpu_timer = 0; - apbt_num_timers_used = 1; - adev = &per_cpu(cpu_apbt_dev, 0); - adev->flags &= ~APBT_DEV_USED; - } - pr_debug("%s: %d APB timers used\n", __func__, apbt_num_timers_used); - - /* here we set up per CPU timer data structure */ - apbt_devs = kzalloc(sizeof(struct apbt_dev) * apbt_num_timers_used, - GFP_KERNEL); - if (!apbt_devs) { - printk(KERN_ERR "Failed to allocate APB timer devices\n"); - return; - } - for (i = 0; i < apbt_num_timers_used; i++) { - adev = &per_cpu(cpu_apbt_dev, i); - adev->num = i; - adev->cpu = i; - p_mtmr = sfi_get_mtmr(i); - if (p_mtmr) { - adev->tick = p_mtmr->freq_hz; - adev->irq = p_mtmr->irq; - } else - printk(KERN_ERR "Failed to get timer for cpu %d\n", i); - adev->count = 0; - sprintf(adev->name, "apbt%d", i); - } + /* kernel cmdline disable apb timer, so we will use lapic timers */ + if (disable_apbt_percpu) { + printk(KERN_INFO "apbt: disabled per cpu timer\n"); + return; + } + pr_debug("%s: %d CPUs online\n", __func__, num_online_cpus()); + if (num_possible_cpus() <= sfi_mtimer_num) { + percpu_timer = 1; + apbt_num_timers_used = num_possible_cpus(); + } else { + percpu_timer = 0; + apbt_num_timers_used = 1; + adev = &per_cpu(cpu_apbt_dev, 0); + adev->flags &= ~APBT_DEV_USED; + } + pr_debug("%s: %d APB timers used\n", __func__, apbt_num_timers_used); + + /* here we set up per CPU timer data structure */ + apbt_devs = kzalloc(sizeof(struct apbt_dev) * apbt_num_timers_used, + GFP_KERNEL); + if (!apbt_devs) { + printk(KERN_ERR "Failed to allocate APB timer devices\n"); + return; + } + for (i = 0; i < apbt_num_timers_used; i++) { + adev = &per_cpu(cpu_apbt_dev, i); + adev->num = i; + adev->cpu = i; + p_mtmr = sfi_get_mtmr(i); + if (p_mtmr) { + adev->tick = p_mtmr->freq_hz; + adev->irq = p_mtmr->irq; + } else + printk(KERN_ERR "Failed to get timer for cpu %d\n", i); + adev->count = 0; + sprintf(adev->name, "apbt%d", i); + } #endif - return; + return; out_noapbt: - apbt_clear_mapping(); - apb_timer_block_enabled = 0; - panic("failed to enable APB timer\n"); + apbt_clear_mapping(); + apb_timer_block_enabled = 0; + panic("failed to enable APB timer\n"); } static inline void apbt_disable(int n) { - if (is_apbt_capable()) { - unsigned long ctrl = apbt_readl(n, APBTMR_N_CONTROL); - ctrl &= ~APBTMR_CONTROL_ENABLE; - apbt_writel(n, ctrl, APBTMR_N_CONTROL); - } + if (is_apbt_capable()) { + unsigned long ctrl = apbt_readl(n, APBTMR_N_CONTROL); + ctrl &= ~APBTMR_CONTROL_ENABLE; + apbt_writel(n, ctrl, APBTMR_N_CONTROL); + } } /* called before apb_timer_enable, use early map */ unsigned long apbt_quick_calibrate() { - int i, scale; - u64 old, new; - cycle_t t1, t2; - unsigned long khz = 0; - u32 loop, shift; - - apbt_set_mapping(); - apbt_start_counter(phy_cs_timer_id); - - /* check if the timer can count down, otherwise return */ - old = apbt_read_clocksource(&clocksource_apbt); - i = 10000; - while (--i) { - if (old != apbt_read_clocksource(&clocksource_apbt)) - break; - } - if (!i) - goto failed; - - /* count 16 ms */ - loop = (apbt_freq * 1000) << 4; - - /* restart the timer to ensure it won't get to 0 in the calibration */ - apbt_start_counter(phy_cs_timer_id); - - old = apbt_read_clocksource(&clocksource_apbt); - old += loop; - - t1 = __native_read_tsc(); - - do { - new = apbt_read_clocksource(&clocksource_apbt); - } while (new < old); - - t2 = __native_read_tsc(); - - shift = 5; - if (unlikely(loop >> shift == 0)) { - printk(KERN_INFO - "APBT TSC calibration failed, not enough resolution\n"); - return 0; - } - scale = (int)div_u64((t2 - t1), loop >> shift); - khz = (scale * apbt_freq * 1000) >> shift; - printk(KERN_INFO "TSC freq calculated by APB timer is %lu khz\n", khz); - return khz; + int i, scale; + u64 old, new; + cycle_t t1, t2; + unsigned long khz = 0; + u32 loop, shift; + + apbt_set_mapping(); + apbt_start_counter(phy_cs_timer_id); + + /* check if the timer can count down, otherwise return */ + old = apbt_read_clocksource(&clocksource_apbt); + i = 10000; + while (--i) { + if (old != apbt_read_clocksource(&clocksource_apbt)) + break; + } + if (!i) + goto failed; + + /* count 16 ms */ + loop = (apbt_freq * 1000) << 4; + + /* restart the timer to ensure it won't get to 0 in the calibration */ + apbt_start_counter(phy_cs_timer_id); + + old = apbt_read_clocksource(&clocksource_apbt); + old += loop; + + t1 = __native_read_tsc(); + + do { + new = apbt_read_clocksource(&clocksource_apbt); + } while (new < old); + + t2 = __native_read_tsc(); + + shift = 5; + if (unlikely(loop >> shift == 0)) { + printk(KERN_INFO + "APBT TSC calibration failed, not enough resolution\n"); + return 0; + } + scale = (int)div_u64((t2 - t1), loop >> shift); + khz = (scale * apbt_freq * 1000) >> shift; + printk(KERN_INFO "TSC freq calculated by APB timer is %lu khz\n", khz); + return khz; failed: - return 0; + return 0; } |