diff options
| author | Mike Frysinger <vapier@gentoo.org> | 2009-08-13 04:27:31 +0000 |
|---|---|---|
| committer | Mike Frysinger <vapier@gentoo.org> | 2009-09-16 22:10:24 -0400 |
| commit | 0198b3bcaed1374f454e56e46f0e1ca1fc24e0a1 (patch) | |
| tree | 883a78de3ff7c1b560ebf18cc6c78e9a7065431f /arch/blackfin/mach-bf533/boards/stamp.c | |
| parent | c4baebf2683d16f24a84a99268ef5f7318905337 (diff) | |
| download | kernel_samsung_smdk4412-0198b3bcaed1374f454e56e46f0e1ca1fc24e0a1.tar.gz kernel_samsung_smdk4412-0198b3bcaed1374f454e56e46f0e1ca1fc24e0a1.tar.bz2 kernel_samsung_smdk4412-0198b3bcaed1374f454e56e46f0e1ca1fc24e0a1.zip | |
Blackfin: drop board resources for dead devices (pbx/ad9960)
These hardware devices are dead and the drivers never cleaned up/merged,
so punt the useless board resource info.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Diffstat (limited to 'arch/blackfin/mach-bf533/boards/stamp.c')
| -rw-r--r-- | arch/blackfin/mach-bf533/boards/stamp.c | 28 |
1 files changed, 0 insertions, 28 deletions
diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c index f3dc2830631..3954baa00c6 100644 --- a/arch/blackfin/mach-bf533/boards/stamp.c +++ b/arch/blackfin/mach-bf533/boards/stamp.c @@ -219,15 +219,6 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = { }; #endif -#if defined(CONFIG_PBX) -static struct bfin5xx_spi_chip spi_si3xxx_chip_info = { - .ctl_reg = 0x4, /* send zero */ - .enable_dma = 0, - .bits_per_word = 8, - .cs_change_per_word = 1, -}; -#endif - #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) static struct bfin5xx_spi_chip spidev_chip_info = { .enable_dma = 0, @@ -298,25 +289,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_PBX) - { - .modalias = "fxs-spi", - .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 8 - CONFIG_J11_JUMPER, - .controller_data = &spi_si3xxx_chip_info, - .mode = SPI_MODE_3, - }, - { - .modalias = "fxo-spi", - .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 8 - CONFIG_J19_JUMPER, - .controller_data = &spi_si3xxx_chip_info, - .mode = SPI_MODE_3, - }, -#endif - #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) { .modalias = "spidev", |