ARM: mach-stmp378x: remove mach

This mach has not seen any updates since the initial inclusion besides
generic cleanup. Furthermore:

- The i.MX23 covered in mach-mxs is just a renamed version of the
  STMP378x.

- mach-stmp378x has a lot of reinvented interfaces, leaking all sorts of
  mach-related includes into the drivers. One example is the dmaengine
  which does not use the linux dmaengine-API but some privately exported
  symbols. So drivers cannot be reused. mach-mxs does it better.

- There is only one board defined (which I couldn't find any trace of
  despite being a development board). It has been converted to
  mach-mxs in a previous patch.

Since the only user of this mach was converted, it means that
mach-stmp378x can go.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@freescale.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

45 files changed, 0 insertions, 3585 deletions

diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 23ecbdad660..ca473b1669a 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -185,7 +185,6 @@ machine-$(CONFIG_ARCH_EXYNOS4)		:= exynos4
 machine-$(CONFIG_ARCH_SA1100)		:= sa1100
 machine-$(CONFIG_ARCH_SHARK)		:= shark
 machine-$(CONFIG_ARCH_SHMOBILE) 	:= shmobile
-machine-$(CONFIG_ARCH_STMP378X)		:= stmp378x
 machine-$(CONFIG_ARCH_TCC8K)		:= tcc8k
 machine-$(CONFIG_ARCH_TEGRA)		:= tegra
 machine-$(CONFIG_ARCH_U300)		:= u300
diff --git a/arch/arm/configs/stmp378x_defconfig b/arch/arm/configs/stmp378x_defconfig
deleted file mode 100644
index 1079c2b6eb3..00000000000
--- a/arch/arm/configs/stmp378x_defconfig
+++ /dev/null
@@ -1,128 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOCALVERSION="-default"
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_STMP3XXX=y
-CONFIG_ARCH_STMP378X=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_HIGHMEM=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttySDBG0,115200 mem=32M"
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_NET_SCHED=y
-# CONFIG_WIRELESS is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_STANDALONE is not set
-CONFIG_MTD=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_GLUEBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=4
-CONFIG_BLK_DEV_RAM_SIZE=6144
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_INPUT_POLLDEV=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_INPUT_MISC=y
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_DEBUG_GPIO=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_TMPFS=y
-CONFIG_CONFIGFS_FS=m
-# CONFIG_MISC_FILESYSTEMS is not set
-# CONFIG_NETWORK_FILESYSTEMS is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_STRIP_ASM_SYMS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_SHIRQ=y
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_DEBUG_OBJECTS=y
-CONFIG_DEBUG_OBJECTS_SELFTEST=y
-CONFIG_DEBUG_OBJECTS_FREE=y
-CONFIG_DEBUG_OBJECTS_TIMERS=y
-CONFIG_DEBUG_SLAB=y
-CONFIG_DEBUG_SLAB_LEAK=y
-CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_PROVE_LOCKING=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-CONFIG_DEBUG_KOBJECT=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_BOOT_TRACER=y
-CONFIG_STACK_TRACER=y
-CONFIG_BLK_DEV_IO_TRACE=y
-CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
-CONFIG_SECURITY=y
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_LZO=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=y
diff --git a/arch/arm/mach-stmp378x/Makefile b/arch/arm/mach-stmp378x/Makefile
deleted file mode 100644
index d156f76b379..00000000000
--- a/arch/arm/mach-stmp378x/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
-obj-$(CONFIG_ARCH_STMP378X) += stmp378x.o
-obj-$(CONFIG_MACH_STMP378X) += stmp378x_devb.o
diff --git a/arch/arm/mach-stmp378x/Makefile.boot b/arch/arm/mach-stmp378x/Makefile.boot
deleted file mode 100644
index 1568ad404d5..00000000000
--- a/arch/arm/mach-stmp378x/Makefile.boot
+++ /dev/null
@@ -1,3 +0,0 @@
-   zreladdr-y	:= 0x40008000
-params_phys-y	:= 0x40000100
-initrd_phys-y	:= 0x40800000
diff --git a/arch/arm/mach-stmp378x/include/mach/entry-macro.S b/arch/arm/mach-stmp378x/include/mach/entry-macro.S
deleted file mode 100644
index 731a92286da..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/entry-macro.S
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Low-level IRQ helper macros for Freescale STMP378X
- *
- * Embedded Alley Solutions, Inc <source@embeddedalley.com>
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-		.macro	disable_fiq
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-
-	        mov	\base, #0xf0000000	@ vm address of IRQ controller
-		ldr	\irqnr, [\base, #0x70]	@ HW_ICOLL_STAT
-		cmp	\irqnr, #0x7f
-		moveqs	\irqnr, #0		@ Zero flag set for no IRQ
-
-		.endm
-
-                .macro  get_irqnr_preamble, base, tmp
-                .endm
-
-                .macro  arch_ret_to_user, tmp1, tmp2
-                .endm
diff --git a/arch/arm/mach-stmp378x/include/mach/irqs.h b/arch/arm/mach-stmp378x/include/mach/irqs.h
deleted file mode 100644
index cc59673becd..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/irqs.h
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * Freescale STMP378X interrupts
- *
- * Copyright (C) 2005 Sigmatel Inc
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#define IRQ_DEBUG_UART			0
-#define IRQ_COMMS_RX			1
-#define IRQ_COMMS_TX			1
-#define IRQ_SSP2_ERROR			2
-#define IRQ_VDD5V			3
-#define IRQ_HEADPHONE_SHORT		4
-#define IRQ_DAC_DMA			5
-#define IRQ_DAC_ERROR			6
-#define IRQ_ADC_DMA			7
-#define IRQ_ADC_ERROR			8
-#define IRQ_SPDIF_DMA			9
-#define IRQ_SAIF2_DMA			9
-#define IRQ_SPDIF_ERROR			10
-#define IRQ_SAIF1_IRQ			10
-#define IRQ_SAIF2_IRQ			10
-#define IRQ_USB_CTRL			11
-#define IRQ_USB_WAKEUP			12
-#define IRQ_GPMI_DMA			13
-#define IRQ_SSP1_DMA			14
-#define IRQ_SSP_ERROR			15
-#define IRQ_GPIO0			16
-#define IRQ_GPIO1			17
-#define IRQ_GPIO2			18
-#define IRQ_SAIF1_DMA			19
-#define IRQ_SSP2_DMA			20
-#define IRQ_ECC8_IRQ			21
-#define IRQ_RTC_ALARM			22
-#define IRQ_UARTAPP_TX_DMA		23
-#define IRQ_UARTAPP_INTERNAL		24
-#define IRQ_UARTAPP_RX_DMA		25
-#define IRQ_I2C_DMA			26
-#define IRQ_I2C_ERROR			27
-#define IRQ_TIMER0			28
-#define IRQ_TIMER1			29
-#define IRQ_TIMER2			30
-#define IRQ_TIMER3			31
-#define IRQ_BATT_BRNOUT			32
-#define IRQ_VDDD_BRNOUT			33
-#define IRQ_VDDIO_BRNOUT		34
-#define IRQ_VDD18_BRNOUT		35
-#define IRQ_TOUCH_DETECT		36
-#define IRQ_LRADC_CH0			37
-#define IRQ_LRADC_CH1			38
-#define IRQ_LRADC_CH2			39
-#define IRQ_LRADC_CH3			40
-#define IRQ_LRADC_CH4			41
-#define IRQ_LRADC_CH5			42
-#define IRQ_LRADC_CH6			43
-#define IRQ_LRADC_CH7			44
-#define IRQ_LCDIF_DMA			45
-#define IRQ_LCDIF_ERROR			46
-#define IRQ_DIGCTL_DEBUG_TRAP		47
-#define IRQ_RTC_1MSEC			48
-#define IRQ_DRI_DMA			49
-#define IRQ_DRI_ATTENTION		50
-#define IRQ_GPMI_ATTENTION		51
-#define IRQ_IR				52
-#define IRQ_DCP_VMI			53
-#define IRQ_DCP				54
-#define IRQ_BCH				56
-#define IRQ_PXP				57
-#define IRQ_UARTAPP2_TX_DMA		58
-#define IRQ_UARTAPP2_INTERNAL		59
-#define IRQ_UARTAPP2_RX_DMA		60
-#define IRQ_VDAC_DETECT			61
-#define IRQ_VDD5V_DROOP			64
-#define IRQ_DCDC4P2_BO			65
-
-
-#define NR_REAL_IRQS	128
-#define NR_IRQS		(NR_REAL_IRQS + 32 * 3)
-
-/* All interrupts are FIQ capable */
-#define FIQ_START		IRQ_DEBUG_UART
-
-/* Hard disk IRQ is a GPMI attention IRQ */
-#define IRQ_HARDDISK		IRQ_GPMI_ATTENTION
diff --git a/arch/arm/mach-stmp378x/include/mach/pins.h b/arch/arm/mach-stmp378x/include/mach/pins.h
deleted file mode 100644
index 93f952d3596..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/pins.h
+++ /dev/null
@@ -1,151 +0,0 @@
-/*
- * Freescale STMP378X SoC pin multiplexing
- *
- * Author: Vladislav Buzov <vbuzov@embeddedalley.com>
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#ifndef __ASM_ARCH_PINS_H
-#define __ASM_ARCH_PINS_H
-
-/*
- * Define all STMP378x pins, a pin name corresponds to a STMP378x hardware
- * interface  this pin belongs to.
- */
-
-/* Bank 0 */
-#define PINID_GPMI_D00		STMP3XXX_PINID(0, 0)
-#define PINID_GPMI_D01		STMP3XXX_PINID(0, 1)
-#define PINID_GPMI_D02		STMP3XXX_PINID(0, 2)
-#define PINID_GPMI_D03		STMP3XXX_PINID(0, 3)
-#define PINID_GPMI_D04		STMP3XXX_PINID(0, 4)
-#define PINID_GPMI_D05		STMP3XXX_PINID(0, 5)
-#define PINID_GPMI_D06		STMP3XXX_PINID(0, 6)
-#define PINID_GPMI_D07		STMP3XXX_PINID(0, 7)
-#define PINID_GPMI_D08		STMP3XXX_PINID(0, 8)
-#define PINID_GPMI_D09		STMP3XXX_PINID(0, 9)
-#define PINID_GPMI_D10		STMP3XXX_PINID(0, 10)
-#define PINID_GPMI_D11		STMP3XXX_PINID(0, 11)
-#define PINID_GPMI_D12		STMP3XXX_PINID(0, 12)
-#define PINID_GPMI_D13		STMP3XXX_PINID(0, 13)
-#define PINID_GPMI_D14		STMP3XXX_PINID(0, 14)
-#define PINID_GPMI_D15		STMP3XXX_PINID(0, 15)
-#define PINID_GPMI_CLE		STMP3XXX_PINID(0, 16)
-#define PINID_GPMI_ALE		STMP3XXX_PINID(0, 17)
-#define PINID_GMPI_CE2N		STMP3XXX_PINID(0, 18)
-#define PINID_GPMI_RDY0		STMP3XXX_PINID(0, 19)
-#define PINID_GPMI_RDY1		STMP3XXX_PINID(0, 20)
-#define PINID_GPMI_RDY2		STMP3XXX_PINID(0, 21)
-#define PINID_GPMI_RDY3		STMP3XXX_PINID(0, 22)
-#define PINID_GPMI_WPN		STMP3XXX_PINID(0, 23)
-#define PINID_GPMI_WRN		STMP3XXX_PINID(0, 24)
-#define PINID_GPMI_RDN		STMP3XXX_PINID(0, 25)
-#define PINID_AUART1_CTS	STMP3XXX_PINID(0, 26)
-#define PINID_AUART1_RTS	STMP3XXX_PINID(0, 27)
-#define PINID_AUART1_RX		STMP3XXX_PINID(0, 28)
-#define PINID_AUART1_TX		STMP3XXX_PINID(0, 29)
-#define PINID_I2C_SCL		STMP3XXX_PINID(0, 30)
-#define PINID_I2C_SDA		STMP3XXX_PINID(0, 31)
-
-/* Bank 1 */
-#define PINID_LCD_D00		STMP3XXX_PINID(1, 0)
-#define PINID_LCD_D01		STMP3XXX_PINID(1, 1)
-#define PINID_LCD_D02		STMP3XXX_PINID(1, 2)
-#define PINID_LCD_D03		STMP3XXX_PINID(1, 3)
-#define PINID_LCD_D04		STMP3XXX_PINID(1, 4)
-#define PINID_LCD_D05		STMP3XXX_PINID(1, 5)
-#define PINID_LCD_D06		STMP3XXX_PINID(1, 6)
-#define PINID_LCD_D07		STMP3XXX_PINID(1, 7)
-#define PINID_LCD_D08		STMP3XXX_PINID(1, 8)
-#define PINID_LCD_D09		STMP3XXX_PINID(1, 9)
-#define PINID_LCD_D10		STMP3XXX_PINID(1, 10)
-#define PINID_LCD_D11		STMP3XXX_PINID(1, 11)
-#define PINID_LCD_D12		STMP3XXX_PINID(1, 12)
-#define PINID_LCD_D13		STMP3XXX_PINID(1, 13)
-#define PINID_LCD_D14		STMP3XXX_PINID(1, 14)
-#define PINID_LCD_D15		STMP3XXX_PINID(1, 15)
-#define PINID_LCD_D16		STMP3XXX_PINID(1, 16)
-#define PINID_LCD_D17		STMP3XXX_PINID(1, 17)
-#define PINID_LCD_RESET		STMP3XXX_PINID(1, 18)
-#define PINID_LCD_RS		STMP3XXX_PINID(1, 19)
-#define PINID_LCD_WR		STMP3XXX_PINID(1, 20)
-#define PINID_LCD_CS		STMP3XXX_PINID(1, 21)
-#define PINID_LCD_DOTCK		STMP3XXX_PINID(1, 22)
-#define PINID_LCD_ENABLE	STMP3XXX_PINID(1, 23)
-#define PINID_LCD_HSYNC		STMP3XXX_PINID(1, 24)
-#define PINID_LCD_VSYNC		STMP3XXX_PINID(1, 25)
-#define PINID_PWM0		STMP3XXX_PINID(1, 26)
-#define PINID_PWM1		STMP3XXX_PINID(1, 27)
-#define PINID_PWM2		STMP3XXX_PINID(1, 28)
-#define PINID_PWM3		STMP3XXX_PINID(1, 29)
-#define PINID_PWM4		STMP3XXX_PINID(1, 30)
-
-/* Bank 2 */
-#define PINID_SSP1_CMD		STMP3XXX_PINID(2, 0)
-#define PINID_SSP1_DETECT	STMP3XXX_PINID(2, 1)
-#define PINID_SSP1_DATA0	STMP3XXX_PINID(2, 2)
-#define PINID_SSP1_DATA1	STMP3XXX_PINID(2, 3)
-#define PINID_SSP1_DATA2	STMP3XXX_PINID(2, 4)
-#define PINID_SSP1_DATA3	STMP3XXX_PINID(2, 5)
-#define PINID_SSP1_SCK		STMP3XXX_PINID(2, 6)
-#define PINID_ROTARYA		STMP3XXX_PINID(2, 7)
-#define PINID_ROTARYB		STMP3XXX_PINID(2, 8)
-#define PINID_EMI_A00		STMP3XXX_PINID(2, 9)
-#define PINID_EMI_A01		STMP3XXX_PINID(2, 10)
-#define PINID_EMI_A02		STMP3XXX_PINID(2, 11)
-#define PINID_EMI_A03		STMP3XXX_PINID(2, 12)
-#define PINID_EMI_A04		STMP3XXX_PINID(2, 13)
-#define PINID_EMI_A05		STMP3XXX_PINID(2, 14)
-#define PINID_EMI_A06		STMP3XXX_PINID(2, 15)
-#define PINID_EMI_A07		STMP3XXX_PINID(2, 16)
-#define PINID_EMI_A08		STMP3XXX_PINID(2, 17)
-#define PINID_EMI_A09		STMP3XXX_PINID(2, 18)
-#define PINID_EMI_A10		STMP3XXX_PINID(2, 19)
-#define PINID_EMI_A11		STMP3XXX_PINID(2, 20)
-#define PINID_EMI_A12		STMP3XXX_PINID(2, 21)
-#define PINID_EMI_BA0		STMP3XXX_PINID(2, 22)
-#define PINID_EMI_BA1		STMP3XXX_PINID(2, 23)
-#define PINID_EMI_CASN		STMP3XXX_PINID(2, 24)
-#define PINID_EMI_CE0N		STMP3XXX_PINID(2, 25)
-#define PINID_EMI_CE1N		STMP3XXX_PINID(2, 26)
-#define PINID_GPMI_CE1N		STMP3XXX_PINID(2, 27)
-#define PINID_GPMI_CE0N		STMP3XXX_PINID(2, 28)
-#define PINID_EMI_CKE		STMP3XXX_PINID(2, 29)
-#define PINID_EMI_RASN		STMP3XXX_PINID(2, 30)
-#define PINID_EMI_WEN		STMP3XXX_PINID(2, 31)
-
-/* Bank 3 */
-#define PINID_EMI_D00		STMP3XXX_PINID(3, 0)
-#define PINID_EMI_D01		STMP3XXX_PINID(3, 1)
-#define PINID_EMI_D02		STMP3XXX_PINID(3, 2)
-#define PINID_EMI_D03		STMP3XXX_PINID(3, 3)
-#define PINID_EMI_D04		STMP3XXX_PINID(3, 4)
-#define PINID_EMI_D05		STMP3XXX_PINID(3, 5)
-#define PINID_EMI_D06		STMP3XXX_PINID(3, 6)
-#define PINID_EMI_D07		STMP3XXX_PINID(3, 7)
-#define PINID_EMI_D08		STMP3XXX_PINID(3, 8)
-#define PINID_EMI_D09		STMP3XXX_PINID(3, 9)
-#define PINID_EMI_D10		STMP3XXX_PINID(3, 10)
-#define PINID_EMI_D11		STMP3XXX_PINID(3, 11)
-#define PINID_EMI_D12		STMP3XXX_PINID(3, 12)
-#define PINID_EMI_D13		STMP3XXX_PINID(3, 13)
-#define PINID_EMI_D14		STMP3XXX_PINID(3, 14)
-#define PINID_EMI_D15		STMP3XXX_PINID(3, 15)
-#define PINID_EMI_DQM0		STMP3XXX_PINID(3, 16)
-#define PINID_EMI_DQM1		STMP3XXX_PINID(3, 17)
-#define PINID_EMI_DQS0		STMP3XXX_PINID(3, 18)
-#define PINID_EMI_DQS1		STMP3XXX_PINID(3, 19)
-#define PINID_EMI_CLK		STMP3XXX_PINID(3, 20)
-#define PINID_EMI_CLKN		STMP3XXX_PINID(3, 21)
-
-#endif /* __ASM_ARCH_PINS_H */
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-apbh.h b/arch/arm/mach-stmp378x/include/mach/regs-apbh.h
deleted file mode 100644
index dbcf85b6ac2..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-apbh.h
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * stmp378x: APBH register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-#ifndef _MACH_REGS_APBH
-#define _MACH_REGS_APBH
-
-#define REGS_APBH_BASE	(STMP3XXX_REGS_BASE + 0x4000)
-#define REGS_APBH_PHYS	0x80004000
-#define REGS_APBH_SIZE	0x2000
-
-#define HW_APBH_CTRL0		0x0
-#define BM_APBH_CTRL0_RESET_CHANNEL	0x00FF0000
-#define BP_APBH_CTRL0_RESET_CHANNEL	16
-#define BM_APBH_CTRL0_CLKGATE	0x40000000
-#define BM_APBH_CTRL0_SFTRST	0x80000000
-
-#define HW_APBH_CTRL1		0x10
-#define BM_APBH_CTRL1_CH0_CMDCMPLT_IRQ	0x00000001
-#define BP_APBH_CTRL1_CH0_CMDCMPLT_IRQ	0
-
-#define HW_APBH_CTRL2		0x20
-
-#define HW_APBH_DEVSEL		0x30
-
-#define HW_APBH_CH0_NXTCMDAR	(0x50 + 0 * 0x70)
-#define HW_APBH_CH1_NXTCMDAR	(0x50 + 1 * 0x70)
-#define HW_APBH_CH2_NXTCMDAR	(0x50 + 2 * 0x70)
-#define HW_APBH_CH3_NXTCMDAR	(0x50 + 3 * 0x70)
-#define HW_APBH_CH4_NXTCMDAR	(0x50 + 4 * 0x70)
-#define HW_APBH_CH5_NXTCMDAR	(0x50 + 5 * 0x70)
-#define HW_APBH_CH6_NXTCMDAR	(0x50 + 6 * 0x70)
-#define HW_APBH_CH7_NXTCMDAR	(0x50 + 7 * 0x70)
-#define HW_APBH_CH8_NXTCMDAR	(0x50 + 8 * 0x70)
-#define HW_APBH_CH9_NXTCMDAR	(0x50 + 9 * 0x70)
-#define HW_APBH_CH10_NXTCMDAR	(0x50 + 10 * 0x70)
-#define HW_APBH_CH11_NXTCMDAR	(0x50 + 11 * 0x70)
-#define HW_APBH_CH12_NXTCMDAR	(0x50 + 12 * 0x70)
-#define HW_APBH_CH13_NXTCMDAR	(0x50 + 13 * 0x70)
-#define HW_APBH_CH14_NXTCMDAR	(0x50 + 14 * 0x70)
-#define HW_APBH_CH15_NXTCMDAR	(0x50 + 15 * 0x70)
-
-#define HW_APBH_CHn_NXTCMDAR	0x50
-
-#define BV_APBH_CHn_CMD_COMMAND__NO_DMA_XFER	 0
-#define BV_APBH_CHn_CMD_COMMAND__DMA_WRITE	 1
-#define BV_APBH_CHn_CMD_COMMAND__DMA_READ	 2
-#define BV_APBH_CHn_CMD_COMMAND__DMA_SENSE	 3
-#define BM_APBH_CHn_CMD_COMMAND	0x00000003
-#define BP_APBH_CHn_CMD_COMMAND	0
-#define BM_APBH_CHn_CMD_CHAIN	0x00000004
-#define BM_APBH_CHn_CMD_IRQONCMPLT	0x00000008
-#define BM_APBH_CHn_CMD_NANDLOCK	0x00000010
-#define BM_APBH_CHn_CMD_NANDWAIT4READY	0x00000020
-#define BM_APBH_CHn_CMD_SEMAPHORE	0x00000040
-#define BM_APBH_CHn_CMD_WAIT4ENDCMD	0x00000080
-#define BM_APBH_CHn_CMD_CMDWORDS	0x0000F000
-#define BP_APBH_CHn_CMD_CMDWORDS	12
-#define BM_APBH_CHn_CMD_XFER_COUNT	0xFFFF0000
-#define BP_APBH_CHn_CMD_XFER_COUNT	16
-
-#define HW_APBH_CH0_SEMA	(0x80 + 0 * 0x70)
-#define HW_APBH_CH1_SEMA	(0x80 + 1 * 0x70)
-#define HW_APBH_CH2_SEMA	(0x80 + 2 * 0x70)
-#define HW_APBH_CH3_SEMA	(0x80 + 3 * 0x70)
-#define HW_APBH_CH4_SEMA	(0x80 + 4 * 0x70)
-#define HW_APBH_CH5_SEMA	(0x80 + 5 * 0x70)
-#define HW_APBH_CH6_SEMA	(0x80 + 6 * 0x70)
-#define HW_APBH_CH7_SEMA	(0x80 + 7 * 0x70)
-#define HW_APBH_CH8_SEMA	(0x80 + 8 * 0x70)
-#define HW_APBH_CH9_SEMA	(0x80 + 9 * 0x70)
-#define HW_APBH_CH10_SEMA	(0x80 + 10 * 0x70)
-#define HW_APBH_CH11_SEMA	(0x80 + 11 * 0x70)
-#define HW_APBH_CH12_SEMA	(0x80 + 12 * 0x70)
-#define HW_APBH_CH13_SEMA	(0x80 + 13 * 0x70)
-#define HW_APBH_CH14_SEMA	(0x80 + 14 * 0x70)
-#define HW_APBH_CH15_SEMA	(0x80 + 15 * 0x70)
-
-#define HW_APBH_CHn_SEMA	0x80
-#define BM_APBH_CHn_SEMA_INCREMENT_SEMA	0x000000FF
-#define BP_APBH_CHn_SEMA_INCREMENT_SEMA	0
-#define BM_APBH_CHn_SEMA_PHORE	0x00FF0000
-#define BP_APBH_CHn_SEMA_PHORE	16
-
-#endif
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-apbx.h b/arch/arm/mach-stmp378x/include/mach/regs-apbx.h
deleted file mode 100644
index 3b934a4d27f..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-apbx.h
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * stmp378x: APBX register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-#ifndef _MACH_REGS_APBX
-#define _MACH_REGS_APBX
-
-#define REGS_APBX_BASE	(STMP3XXX_REGS_BASE + 0x24000)
-#define REGS_APBX_PHYS	0x80024000
-#define REGS_APBX_SIZE	0x2000
-
-#define HW_APBX_CTRL0		0x0
-#define BM_APBX_CTRL0_CLKGATE	0x40000000
-#define BM_APBX_CTRL0_SFTRST	0x80000000
-
-#define HW_APBX_CTRL1		0x10
-
-#define HW_APBX_CTRL2		0x20
-
-#define HW_APBX_CHANNEL_CTRL	0x30
-#define BM_APBX_CHANNEL_CTRL_RESET_CHANNEL	0xFFFF0000
-#define BP_APBX_CHANNEL_CTRL_RESET_CHANNEL	16
-
-#define HW_APBX_DEVSEL		0x40
-
-#define HW_APBX_CH0_NXTCMDAR	(0x110 + 0 * 0x70)
-#define HW_APBX_CH1_NXTCMDAR	(0x110 + 1 * 0x70)
-#define HW_APBX_CH2_NXTCMDAR	(0x110 + 2 * 0x70)
-#define HW_APBX_CH3_NXTCMDAR	(0x110 + 3 * 0x70)
-#define HW_APBX_CH4_NXTCMDAR	(0x110 + 4 * 0x70)
-#define HW_APBX_CH5_NXTCMDAR	(0x110 + 5 * 0x70)
-#define HW_APBX_CH6_NXTCMDAR	(0x110 + 6 * 0x70)
-#define HW_APBX_CH7_NXTCMDAR	(0x110 + 7 * 0x70)
-#define HW_APBX_CH8_NXTCMDAR	(0x110 + 8 * 0x70)
-#define HW_APBX_CH9_NXTCMDAR	(0x110 + 9 * 0x70)
-#define HW_APBX_CH10_NXTCMDAR	(0x110 + 10 * 0x70)
-#define HW_APBX_CH11_NXTCMDAR	(0x110 + 11 * 0x70)
-#define HW_APBX_CH12_NXTCMDAR	(0x110 + 12 * 0x70)
-#define HW_APBX_CH13_NXTCMDAR	(0x110 + 13 * 0x70)
-#define HW_APBX_CH14_NXTCMDAR	(0x110 + 14 * 0x70)
-#define HW_APBX_CH15_NXTCMDAR	(0x110 + 15 * 0x70)
-
-#define HW_APBX_CHn_NXTCMDAR	0x110
-#define BM_APBX_CHn_CMD_COMMAND	0x00000003
-#define BP_APBX_CHn_CMD_COMMAND	0
-#define BV_APBX_CHn_CMD_COMMAND__NO_DMA_XFER	 0
-#define BV_APBX_CHn_CMD_COMMAND__DMA_WRITE	 1
-#define BV_APBX_CHn_CMD_COMMAND__DMA_READ	 2
-#define BV_APBX_CHn_CMD_COMMAND__DMA_SENSE	 3
-#define BM_APBX_CHn_CMD_CHAIN	0x00000004
-#define BM_APBX_CHn_CMD_IRQONCMPLT	0x00000008
-#define BM_APBX_CHn_CMD_SEMAPHORE	0x00000040
-#define BM_APBX_CHn_CMD_WAIT4ENDCMD	0x00000080
-#define BM_APBX_CHn_CMD_HALTONTERMINATE	0x00000100
-#define BM_APBX_CHn_CMD_CMDWORDS	0x0000F000
-#define BP_APBX_CHn_CMD_CMDWORDS	12
-#define BM_APBX_CHn_CMD_XFER_COUNT	0xFFFF0000
-#define BP_APBX_CHn_CMD_XFER_COUNT	16
-
-#define HW_APBX_CH0_BAR		(0x130 + 0 * 0x70)
-#define HW_APBX_CH1_BAR		(0x130 + 1 * 0x70)
-#define HW_APBX_CH2_BAR		(0x130 + 2 * 0x70)
-#define HW_APBX_CH3_BAR		(0x130 + 3 * 0x70)
-#define HW_APBX_CH4_BAR		(0x130 + 4 * 0x70)
-#define HW_APBX_CH5_BAR		(0x130 + 5 * 0x70)
-#define HW_APBX_CH6_BAR		(0x130 + 6 * 0x70)
-#define HW_APBX_CH7_BAR		(0x130 + 7 * 0x70)
-#define HW_APBX_CH8_BAR		(0x130 + 8 * 0x70)
-#define HW_APBX_CH9_BAR		(0x130 + 9 * 0x70)
-#define HW_APBX_CH10_BAR		(0x130 + 10 * 0x70)
-#define HW_APBX_CH11_BAR		(0x130 + 11 * 0x70)
-#define HW_APBX_CH12_BAR		(0x130 + 12 * 0x70)
-#define HW_APBX_CH13_BAR		(0x130 + 13 * 0x70)
-#define HW_APBX_CH14_BAR		(0x130 + 14 * 0x70)
-#define HW_APBX_CH15_BAR		(0x130 + 15 * 0x70)
-
-#define HW_APBX_CHn_BAR		0x130
-
-#define HW_APBX_CH0_SEMA	(0x140 + 0 * 0x70)
-#define HW_APBX_CH1_SEMA	(0x140 + 1 * 0x70)
-#define HW_APBX_CH2_SEMA	(0x140 + 2 * 0x70)
-#define HW_APBX_CH3_SEMA	(0x140 + 3 * 0x70)
-#define HW_APBX_CH4_SEMA	(0x140 + 4 * 0x70)
-#define HW_APBX_CH5_SEMA	(0x140 + 5 * 0x70)
-#define HW_APBX_CH6_SEMA	(0x140 + 6 * 0x70)
-#define HW_APBX_CH7_SEMA	(0x140 + 7 * 0x70)
-#define HW_APBX_CH8_SEMA	(0x140 + 8 * 0x70)
-#define HW_APBX_CH9_SEMA	(0x140 + 9 * 0x70)
-#define HW_APBX_CH10_SEMA	(0x140 + 10 * 0x70)
-#define HW_APBX_CH11_SEMA	(0x140 + 11 * 0x70)
-#define HW_APBX_CH12_SEMA	(0x140 + 12 * 0x70)
-#define HW_APBX_CH13_SEMA	(0x140 + 13 * 0x70)
-#define HW_APBX_CH14_SEMA	(0x140 + 14 * 0x70)
-#define HW_APBX_CH15_SEMA	(0x140 + 15 * 0x70)
-
-#define HW_APBX_CHn_SEMA	0x140
-#define BM_APBX_CHn_SEMA_INCREMENT_SEMA	0x000000FF
-#define BP_APBX_CHn_SEMA_INCREMENT_SEMA	0
-#define BM_APBX_CHn_SEMA_PHORE	0x00FF0000
-#define BP_APBX_CHn_SEMA_PHORE	16
-
-#endif
-
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-audioin.h b/arch/arm/mach-stmp378x/include/mach/regs-audioin.h
deleted file mode 100644
index 641ac6126f8..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-audioin.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * stmp378x: AUDIOIN register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-#define REGS_AUDIOIN_BASE	(STMP3XXX_REGS_BASE + 0x4C000)
-#define REGS_AUDIOIN_PHYS	0x8004C000
-#define REGS_AUDIOIN_SIZE	0x2000
-
-#define HW_AUDIOIN_CTRL		0x0
-#define BM_AUDIOIN_CTRL_RUN	0x00000001
-#define BP_AUDIOIN_CTRL_RUN	0
-#define BM_AUDIOIN_CTRL_FIFO_ERROR_IRQ_EN	0x00000002
-#define BM_AUDIOIN_CTRL_FIFO_OVERFLOW_IRQ	0x00000004
-#define BM_AUDIOIN_CTRL_FIFO_UNDERFLOW_IRQ	0x00000008
-#define BM_AUDIOIN_CTRL_WORD_LENGTH	0x00000020
-#define BM_AUDIOIN_CTRL_CLKGATE	0x40000000
-#define BM_AUDIOIN_CTRL_SFTRST	0x80000000
-
-#define HW_AUDIOIN_STAT		0x10
-
-#define HW_AUDIOIN_ADCSRR	0x20
-
-#define HW_AUDIOIN_ADCVOLUME	0x30
-#define BM_AUDIOIN_ADCVOLUME_VOLUME_RIGHT	0x000000FF
-#define BP_AUDIOIN_ADCVOLUME_VOLUME_RIGHT	0
-#define BM_AUDIOIN_ADCVOLUME_VOLUME_LEFT	0x00FF0000
-#define BP_AUDIOIN_ADCVOLUME_VOLUME_LEFT	16
-
-#define HW_AUDIOIN_ADCDEBUG	0x40
-
-#define HW_AUDIOIN_ADCVOL	0x50
-#define BM_AUDIOIN_ADCVOL_GAIN_RIGHT	0x0000000F
-#define BP_AUDIOIN_ADCVOL_GAIN_RIGHT	0
-#define BM_AUDIOIN_ADCVOL_SELECT_RIGHT	0x00000030
-#define BP_AUDIOIN_ADCVOL_SELECT_RIGHT	4
-#define BM_AUDIOIN_ADCVOL_GAIN_LEFT	0x00000F00
-#define BP_AUDIOIN_ADCVOL_GAIN_LEFT	8
-#define BM_AUDIOIN_ADCVOL_SELECT_LEFT	0x00003000
-#define BP_AUDIOIN_ADCVOL_SELECT_LEFT	12
-#define BM_AUDIOIN_ADCVOL_MUTE	0x01000000
-
-#define HW_AUDIOIN_MICLINE	0x60
-
-#define HW_AUDIOIN_ANACLKCTRL	0x70
-#define BM_AUDIOIN_ANACLKCTRL_CLKGATE	0x80000000
-
-#define HW_AUDIOIN_DATA		0x80
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-audioout.h b/arch/arm/mach-stmp378x/include/mach/regs-audioout.h
deleted file mode 100644
index f533e23694a..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-audioout.h
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
- * stmp378x: AUDIOOUT register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-#define REGS_AUDIOOUT_BASE	(STMP3XXX_REGS_BASE + 0x48000)
-#define REGS_AUDIOOUT_PHYS	0x80048000
-#define REGS_AUDIOOUT_SIZE	0x2000
-
-#define HW_AUDIOOUT_CTRL	0x0
-#define BM_AUDIOOUT_CTRL_RUN	0x00000001
-#define BP_AUDIOOUT_CTRL_RUN	0
-#define BM_AUDIOOUT_CTRL_FIFO_ERROR_IRQ_EN	0x00000002
-#define BM_AUDIOOUT_CTRL_FIFO_OVERFLOW_IRQ	0x00000004
-#define BM_AUDIOOUT_CTRL_FIFO_UNDERFLOW_IRQ	0x00000008
-#define BM_AUDIOOUT_CTRL_WORD_LENGTH	0x00000040
-#define BM_AUDIOOUT_CTRL_CLKGATE	0x40000000
-#define BM_AUDIOOUT_CTRL_SFTRST	0x80000000
-
-#define HW_AUDIOOUT_STAT	0x10
-
-#define HW_AUDIOOUT_DACSRR	0x20
-#define BM_AUDIOOUT_DACSRR_SRC_FRAC	0x00001FFF
-#define BP_AUDIOOUT_DACSRR_SRC_FRAC	0
-#define BM_AUDIOOUT_DACSRR_SRC_INT	0x001F0000
-#define BP_AUDIOOUT_DACSRR_SRC_INT	16
-#define BM_AUDIOOUT_DACSRR_SRC_HOLD	0x07000000
-#define BP_AUDIOOUT_DACSRR_SRC_HOLD	24
-#define BM_AUDIOOUT_DACSRR_BASEMULT	0x70000000
-#define BP_AUDIOOUT_DACSRR_BASEMULT	28
-
-#define HW_AUDIOOUT_DACVOLUME	0x30
-#define BM_AUDIOOUT_DACVOLUME_MUTE_RIGHT	0x00000100
-#define BM_AUDIOOUT_DACVOLUME_MUTE_LEFT	0x01000000
-#define BM_AUDIOOUT_DACVOLUME_EN_ZCD	0x02000000
-
-#define HW_AUDIOOUT_DACDEBUG	0x40
-
-#define HW_AUDIOOUT_HPVOL	0x50
-#define BM_AUDIOOUT_HPVOL_MUTE	0x01000000
-#define BM_AUDIOOUT_HPVOL_EN_MSTR_ZCD	0x02000000
-
-#define HW_AUDIOOUT_PWRDN	0x70
-#define BM_AUDIOOUT_PWRDN_HEADPHONE	0x00000001
-#define BP_AUDIOOUT_PWRDN_HEADPHONE	0
-#define BM_AUDIOOUT_PWRDN_CAPLESS	0x00000010
-#define BM_AUDIOOUT_PWRDN_ADC	0x00000100
-#define BM_AUDIOOUT_PWRDN_DAC	0x00001000
-#define BM_AUDIOOUT_PWRDN_RIGHT_ADC	0x00010000
-#define BM_AUDIOOUT_PWRDN_SPEAKER	0x01000000
-
-#define HW_AUDIOOUT_REFCTRL	0x80
-#define BM_AUDIOOUT_REFCTRL_VAG_VAL	0x000000F0
-#define BP_AUDIOOUT_REFCTRL_VAG_VAL	4
-#define BM_AUDIOOUT_REFCTRL_ADC_REFVAL	0x00000F00
-#define BP_AUDIOOUT_REFCTRL_ADC_REFVAL	8
-#define BM_AUDIOOUT_REFCTRL_ADJ_VAG	0x00001000
-#define BM_AUDIOOUT_REFCTRL_ADJ_ADC	0x00002000
-#define BM_AUDIOOUT_REFCTRL_BIAS_CTRL	0x00030000
-#define BP_AUDIOOUT_REFCTRL_BIAS_CTRL	16
-#define BM_AUDIOOUT_REFCTRL_LOW_PWR	0x00080000
-#define BM_AUDIOOUT_REFCTRL_VBG_ADJ	0x00700000
-#define BP_AUDIOOUT_REFCTRL_VBG_ADJ	20
-#define BM_AUDIOOUT_REFCTRL_XTAL_BGR_BIAS	0x01000000
-#define BM_AUDIOOUT_REFCTRL_RAISE_REF	0x02000000
-
-#define HW_AUDIOOUT_ANACTRL	0x90
-#define BM_AUDIOOUT_ANACTRL_HP_CLASSAB	0x00000010
-#define BM_AUDIOOUT_ANACTRL_HP_HOLD_GND	0x00000020
-
-#define HW_AUDIOOUT_TEST	0xA0
-#define BM_AUDIOOUT_TEST_HP_I1_ADJ	0x00C00000
-#define BP_AUDIOOUT_TEST_HP_I1_ADJ	22
-
-#define HW_AUDIOOUT_BISTCTRL	0xB0
-
-#define HW_AUDIOOUT_BISTSTAT0	0xC0
-
-#define HW_AUDIOOUT_BISTSTAT1	0xD0
-
-#define HW_AUDIOOUT_ANACLKCTRL	0xE0
-#define BM_AUDIOOUT_ANACLKCTRL_CLKGATE	0x80000000
-
-#define HW_AUDIOOUT_DATA	0xF0
-
-#define HW_AUDIOOUT_SPEAKERCTRL	0x100
-#define BM_AUDIOOUT_SPEAKERCTRL_MUTE	0x01000000
-
-#define HW_AUDIOOUT_VERSION	0x200
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-bch.h b/arch/arm/mach-stmp378x/include/mach/regs-bch.h
deleted file mode 100644
index 532d2465071..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-bch.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * stmp378x: BCH register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-#define REGS_BCH_BASE	(STMP3XXX_REGS_BASE + 0xA000)
-#define REGS_BCH_PHYS	0x8000A000
-#define REGS_BCH_SIZE	0x2000
-
-#define HW_BCH_CTRL		0x0
-#define BM_BCH_CTRL_COMPLETE_IRQ	0x00000001
-#define BP_BCH_CTRL_COMPLETE_IRQ	0
-#define BM_BCH_CTRL_COMPLETE_IRQ_EN	0x00000100
-
-#define HW_BCH_STATUS0		0x10
-#define BM_BCH_STATUS0_UNCORRECTABLE	0x00000004
-#define BM_BCH_STATUS0_CORRECTED	0x00000008
-#define BM_BCH_STATUS0_STATUS_BLK0	0x0000FF00
-#define BP_BCH_STATUS0_STATUS_BLK0	8
-#define BM_BCH_STATUS0_COMPLETED_CE	0x000F0000
-#define BP_BCH_STATUS0_COMPLETED_CE	16
-
-#define HW_BCH_LAYOUTSELECT	0x70
-
-#define HW_BCH_FLASH0LAYOUT0	0x80
-#define BM_BCH_FLASH0LAYOUT0_DATA0_SIZE	0x00000FFF
-#define BP_BCH_FLASH0LAYOUT0_DATA0_SIZE	0
-#define BM_BCH_FLASH0LAYOUT0_ECC0	0x0000F000
-#define BP_BCH_FLASH0LAYOUT0_ECC0	12
-#define BM_BCH_FLASH0LAYOUT0_META_SIZE	0x00FF0000
-#define BP_BCH_FLASH0LAYOUT0_META_SIZE	16
-#define BM_BCH_FLASH0LAYOUT0_NBLOCKS	0xFF000000
-#define BP_BCH_FLASH0LAYOUT0_NBLOCKS	24
-#define BM_BCH_FLASH0LAYOUT1_DATAN_SIZE	0x00000FFF
-#define BP_BCH_FLASH0LAYOUT1_DATAN_SIZE	0
-#define BM_BCH_FLASH0LAYOUT1_ECCN	0x0000F000
-#define BP_BCH_FLASH0LAYOUT1_ECCN	12
-#define BM_BCH_FLASH0LAYOUT1_PAGE_SIZE	0xFFFF0000
-#define BP_BCH_FLASH0LAYOUT1_PAGE_SIZE	16
-
-#define HW_BCH_BLOCKNAME	0x150
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-clkctrl.h b/arch/arm/mach-stmp378x/include/mach/regs-clkctrl.h
deleted file mode 100644
index 7c546afd57a..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-clkctrl.h
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * stmp378x: CLKCTRL register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-#ifndef _MACH_REGS_CLKCTRL
-#define _MACH_REGS_CLKCTRL
-
-#define REGS_CLKCTRL_BASE	(STMP3XXX_REGS_BASE + 0x40000)
-#define REGS_CLKCTRL_PHYS	0x80040000
-#define REGS_CLKCTRL_SIZE	0x2000
-
-#define HW_CLKCTRL_PLLCTRL0	0x0
-#define BM_CLKCTRL_PLLCTRL0_EN_USB_CLKS	0x00040000
-
-#define HW_CLKCTRL_CPU		0x20
-#define BM_CLKCTRL_CPU_DIV_CPU	0x0000003F
-#define BP_CLKCTRL_CPU_DIV_CPU	0
-
-#define HW_CLKCTRL_HBUS		0x30
-#define BM_CLKCTRL_HBUS_DIV	0x0000001F
-#define BP_CLKCTRL_HBUS_DIV	0
-#define BM_CLKCTRL_HBUS_DIV_FRAC_EN	0x00000020
-
-#define HW_CLKCTRL_XBUS		0x40
-
-#define HW_CLKCTRL_XTAL		0x50
-#define BM_CLKCTRL_XTAL_DRI_CLK24M_GATE	0x10000000
-
-#define HW_CLKCTRL_PIX		0x60
-#define BM_CLKCTRL_PIX_DIV	0x00000FFF
-#define BP_CLKCTRL_PIX_DIV	0
-#define BM_CLKCTRL_PIX_CLKGATE	0x80000000
-
-#define HW_CLKCTRL_SSP		0x70
-
-#define HW_CLKCTRL_GPMI		0x80
-
-#define HW_CLKCTRL_SPDIF	0x90
-
-#define HW_CLKCTRL_EMI		0xA0
-#define BM_CLKCTRL_EMI_DIV_EMI	0x0000003F
-#define BP_CLKCTRL_EMI_DIV_EMI	0
-#define BM_CLKCTRL_EMI_DCC_RESYNC_ENABLE	0x00010000
-#define BM_CLKCTRL_EMI_BUSY_DCC_RESYNC	0x00020000
-#define BM_CLKCTRL_EMI_BUSY_REF_EMI	0x10000000
-#define BM_CLKCTRL_EMI_BUSY_REF_XTAL	0x20000000
-
-#define HW_CLKCTRL_IR		0xB0
-
-#define HW_CLKCTRL_SAIF		0xC0
-
-#define HW_CLKCTRL_TV		0xD0
-
-#define HW_CLKCTRL_ETM		0xE0
-
-#define HW_CLKCTRL_FRAC		0xF0
-#define BM_CLKCTRL_FRAC_EMIFRAC	0x00003F00
-#define BP_CLKCTRL_FRAC_EMIFRAC	8
-#define BM_CLKCTRL_FRAC_PIXFRAC	0x003F0000
-#define BP_CLKCTRL_FRAC_PIXFRAC	16
-#define BM_CLKCTRL_FRAC_CLKGATEPIX	0x00800000
-
-#define HW_CLKCTRL_FRAC1	0x100
-
-#define HW_CLKCTRL_CLKSEQ	0x110
-#define BM_CLKCTRL_CLKSEQ_BYPASS_PIX	0x00000002
-
-#define HW_CLKCTRL_RESET	0x120
-#define BM_CLKCTRL_RESET_DIG	0x00000001
-#define BP_CLKCTRL_RESET_DIG	0
-
-#endif
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-dcp.h b/arch/arm/mach-stmp378x/include/mach/regs-dcp.h
deleted file mode 100644
index fdedd00c0e2..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-dcp.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * stmp378x: DCP register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-#define REGS_DCP_BASE	(STMP3XXX_REGS_BASE + 0x28000)
-#define REGS_DCP_PHYS	0x80028000
-#define REGS_DCP_SIZE	0x2000
-
-#define HW_DCP_CTRL		0x0
-#define BM_DCP_CTRL_CHANNEL_INTERRUPT_ENABLE	0x000000FF
-#define BP_DCP_CTRL_CHANNEL_INTERRUPT_ENABLE	0
-#define BM_DCP_CTRL_ENABLE_CONTEXT_CACHING	0x00400000
-#define BM_DCP_CTRL_GATHER_RESIDUAL_WRITES	0x00800000
-#define BM_DCP_CTRL_CLKGATE	0x40000000
-#define BM_DCP_CTRL_SFTRST	0x80000000
-
-#define HW_DCP_STAT		0x10
-#define BM_DCP_STAT_IRQ		0x0000000F
-#define BP_DCP_STAT_IRQ		0
-
-#define HW_DCP_CHANNELCTRL	0x20
-#define BM_DCP_CHANNELCTRL_ENABLE_CHANNEL	0x000000FF
-#define BP_DCP_CHANNELCTRL_ENABLE_CHANNEL	0
-
-#define HW_DCP_CONTEXT		0x50
-#define BM_DCP_PACKET1_INTERRUPT	0x00000001
-#define BP_DCP_PACKET1_INTERRUPT	0
-#define BM_DCP_PACKET1_DECR_SEMAPHORE	0x00000002
-#define BM_DCP_PACKET1_CHAIN	0x00000004
-#define BM_DCP_PACKET1_CHAIN_CONTIGUOUS	0x00000008
-#define BM_DCP_PACKET1_ENABLE_CIPHER	0x00000020
-#define BM_DCP_PACKET1_ENABLE_HASH	0x00000040
-#define BM_DCP_PACKET1_CIPHER_ENCRYPT	0x00000100
-#define BM_DCP_PACKET1_CIPHER_INIT	0x00000200
-#define BM_DCP_PACKET1_OTP_KEY	0x00000400
-#define BM_DCP_PACKET1_PAYLOAD_KEY	0x00000800
-#define BM_DCP_PACKET1_HASH_INIT	0x00001000
-#define BM_DCP_PACKET1_HASH_TERM	0x00002000
-#define BM_DCP_PACKET2_CIPHER_SELECT	0x0000000F
-#define BP_DCP_PACKET2_CIPHER_SELECT	0
-#define BM_DCP_PACKET2_CIPHER_MODE	0x000000F0
-#define BP_DCP_PACKET2_CIPHER_MODE	4
-#define BM_DCP_PACKET2_KEY_SELECT	0x0000FF00
-#define BP_DCP_PACKET2_KEY_SELECT	8
-#define BM_DCP_PACKET2_HASH_SELECT	0x000F0000
-#define BP_DCP_PACKET2_HASH_SELECT	16
-#define BM_DCP_PACKET2_CIPHER_CFG	0xFF000000
-#define BP_DCP_PACKET2_CIPHER_CFG	24
-
-#define HW_DCP_CH0CMDPTR	(0x100 + 0 * 0x40)
-#define HW_DCP_CH1CMDPTR	(0x100 + 1 * 0x40)
-#define HW_DCP_CH2CMDPTR	(0x100 + 2 * 0x40)
-#define HW_DCP_CH3CMDPTR	(0x100 + 3 * 0x40)
-
-#define HW_DCP_CHnCMDPTR	0x100
-
-#define HW_DCP_CH0SEMA		(0x110 + 0 * 0x40)
-#define HW_DCP_CH1SEMA		(0x110 + 1 * 0x40)
-#define HW_DCP_CH2SEMA		(0x110 + 2 * 0x40)
-#define HW_DCP_CH3SEMA		(0x110 + 3 * 0x40)
-
-#define HW_DCP_CHnSEMA		0x110
-#define BM_DCP_CHnSEMA_INCREMENT	0x000000FF
-#define BP_DCP_CHnSEMA_INCREMENT	0
-
-#define HW_DCP_CH0STAT		(0x120 + 0 * 0x40)
-#define HW_DCP_CH1STAT		(0x120 + 1 * 0x40)
-#define HW_DCP_CH2STAT		(0x120 + 2 * 0x40)
-#define HW_DCP_CH3STAT		(0x120 + 3 * 0x40)
-
-#define HW_DCP_CHnSTAT		0x120
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-digctl.h b/arch/arm/mach-stmp378x/include/mach/regs-digctl.h
deleted file mode 100644
index 5293005523b..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-digctl.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * stmp378x: DIGCTL register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-#define REGS_DIGCTL_BASE	(STMP3XXX_REGS_BASE + 0x1C000)
-#define REGS_DIGCTL_PHYS	0x8001C000
-#define REGS_DIGCTL_SIZE	0x2000
-
-#define HW_DIGCTL_CTRL		0x0
-#define BM_DIGCTL_CTRL_USB_CLKGATE	0x00000004
-
-#define HW_DIGCTL_ARMCACHE	0x2B0
-#define BM_DIGCTL_ARMCACHE_ITAG_SS	0x00000003
-#define BP_DIGCTL_ARMCACHE_ITAG_SS	0
-#define BM_DIGCTL_ARMCACHE_DTAG_SS	0x00000030
-#define BP_DIGCTL_ARMCACHE_DTAG_SS	4
-#define BM_DIGCTL_ARMCACHE_CACHE_SS	0x00000300
-#define BP_DIGCTL_ARMCACHE_CACHE_SS	8
-#define BM_DIGCTL_ARMCACHE_DRTY_SS	0x00003000
-#define BP_DIGCTL_ARMCACHE_DRTY_SS	12
-#define BM_DIGCTL_ARMCACHE_VALID_SS	0x00030000
-#define BP_DIGCTL_ARMCACHE_VALID_SS	16
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-dram.h b/arch/arm/mach-stmp378x/include/mach/regs-dram.h
deleted file mode 100644
index 02851431677..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-dram.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * stmp378x: DRAM register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-#define REGS_DRAM_BASE	(STMP3XXX_REGS_BASE + 0xE0000)
-#define REGS_DRAM_PHYS	0x800E0000
-#define REGS_DRAM_SIZE	0x2000
-
-#define HW_DRAM_CTL06		0x18
-
-#define HW_DRAM_CTL08		0x20
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-dri.h b/arch/arm/mach-stmp378x/include/mach/regs-dri.h
deleted file mode 100644
index da25f7e397e..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-dri.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * stmp378x: DRI register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-#define REGS_DRI_BASE	(STMP3XXX_REGS_BASE + 0x74000)
-#define REGS_DRI_PHYS	0x80074000
-#define REGS_DRI_SIZE	0x2000
-
-#define HW_DRI_CTRL		0x0
-#define BM_DRI_CTRL_RUN		0x00000001
-#define BP_DRI_CTRL_RUN		0
-#define BM_DRI_CTRL_ATTENTION_IRQ	0x00000002
-#define BM_DRI_CTRL_PILOT_SYNC_LOSS_IRQ	0x00000004
-#define BM_DRI_CTRL_OVERFLOW_IRQ	0x00000008
-#define BM_DRI_CTRL_ATTENTION_IRQ_EN	0x00000200
-#define BM_DRI_CTRL_PILOT_SYNC_LOSS_IRQ_EN	0x00000400
-#define BM_DRI_CTRL_OVERFLOW_IRQ_EN	0x00000800
-#define BM_DRI_CTRL_REACQUIRE_PHASE	0x00008000
-#define BM_DRI_CTRL_STOP_ON_PILOT_ERROR	0x02000000
-#define BM_DRI_CTRL_STOP_ON_OFLOW_ERROR	0x04000000
-#define BM_DRI_CTRL_ENABLE_INPUTS	0x20000000
-#define BM_DRI_CTRL_CLKGATE	0x40000000
-#define BM_DRI_CTRL_SFTRST	0x80000000
-
-#define HW_DRI_TIMING		0x10
-#define BM_DRI_TIMING_GAP_DETECTION_INTERVAL	0x000000FF
-#define BP_DRI_TIMING_GAP_DETECTION_INTERVAL	0
-#define BM_DRI_TIMING_PILOT_REP_RATE	0x000F0000
-#define BP_DRI_TIMING_PILOT_REP_RATE	16
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-ecc8.h b/arch/arm/mach-stmp378x/include/mach/regs-ecc8.h
deleted file mode 100644
index cc353bec331..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-ecc8.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * stmp378x: ECC8 register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-#define REGS_ECC8_BASE	(STMP3XXX_REGS_BASE + 0x8000)
-#define REGS_ECC8_PHYS	0x80008000
-#define REGS_ECC8_SIZE	0x2000
-
-#define HW_ECC8_CTRL		0x0
-#define BM_ECC8_CTRL_COMPLETE_IRQ	0x00000001
-#define BP_ECC8_CTRL_COMPLETE_IRQ	0
-#define BM_ECC8_CTRL_COMPLETE_IRQ_EN	0x00000100
-#define BM_ECC8_CTRL_AHBM_SFTRST	0x20000000
-
-#define HW_ECC8_STATUS0		0x10
-#define BM_ECC8_STATUS0_UNCORRECTABLE	0x00000004
-#define BM_ECC8_STATUS0_CORRECTED	0x00000008
-#define BM_ECC8_STATUS0_STATUS_AUX	0x00000F00
-#define BP_ECC8_STATUS0_STATUS_AUX	8
-#define BM_ECC8_STATUS0_COMPLETED_CE	0x000F0000
-#define BP_ECC8_STATUS0_COMPLETED_CE	16
-
-#define HW_ECC8_STATUS1		0x20
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-emi.h b/arch/arm/mach-stmp378x/include/mach/regs-emi.h
deleted file mode 100644
index 98773fc33d7..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-emi.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * stmp378x: EMI register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-#define REGS_EMI_BASE	(STMP3XXX_REGS_BASE + 0x20000)
-#define REGS_EMI_PHYS	0x80020000
-#define REGS_EMI_SIZE	0x2000
-
-#define HW_EMI_STAT		0x10
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-gpmi.h b/arch/arm/mach-stmp378x/include/mach/regs-gpmi.h
deleted file mode 100644
index 2cc8bbe9168..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-gpmi.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * stmp378x: GPMI register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-#define REGS_GPMI_BASE	(STMP3XXX_REGS_BASE + 0xC000)
-#define REGS_GPMI_PHYS	0x8000C000
-#define REGS_GPMI_SIZE	0x2000
-
-#define HW_GPMI_CTRL0		0x0
-#define BM_GPMI_CTRL0_XFER_COUNT	0x0000FFFF
-#define BP_GPMI_CTRL0_XFER_COUNT	0
-#define BM_GPMI_CTRL0_CS	0x00300000
-#define BP_GPMI_CTRL0_CS	20
-#define BM_GPMI_CTRL0_LOCK_CS	0x00400000
-#define BM_GPMI_CTRL0_WORD_LENGTH	0x00800000
-#define BM_GPMI_CTRL0_ADDRESS      0x000E0000
-#define BP_GPMI_CTRL0_ADDRESS      17
-#define BV_GPMI_CTRL0_ADDRESS__NAND_DATA  0x0
-#define BV_GPMI_CTRL0_ADDRESS__NAND_CLE   0x1
-#define BV_GPMI_CTRL0_ADDRESS__NAND_ALE   0x2
-#define BM_GPMI_CTRL0_ADDRESS_INCREMENT      0x00010000
-#define BM_GPMI_CTRL0_COMMAND_MODE	0x03000000
-#define BP_GPMI_CTRL0_COMMAND_MODE	24
-#define BV_GPMI_CTRL0_COMMAND_MODE__WRITE	    0x0
-#define BV_GPMI_CTRL0_COMMAND_MODE__READ	     0x1
-#define BV_GPMI_CTRL0_COMMAND_MODE__READ_AND_COMPARE 0x2
-#define BV_GPMI_CTRL0_COMMAND_MODE__WAIT_FOR_READY   0x3
-#define BM_GPMI_CTRL0_RUN	0x20000000
-#define BM_GPMI_CTRL0_CLKGATE	0x40000000
-#define BM_GPMI_CTRL0_SFTRST	0x80000000
-#define BM_GPMI_ECCCTRL_BUFFER_MASK	0x000001FF
-#define BP_GPMI_ECCCTRL_BUFFER_MASK	0
-#define BM_GPMI_ECCCTRL_ENABLE_ECC	0x00001000
-#define BM_GPMI_ECCCTRL_ECC_CMD	0x00006000
-#define BP_GPMI_ECCCTRL_ECC_CMD	13
-#define BV_GPMI_ECCCTRL_ECC_CMD__DECODE_4_BIT			0
-#define BV_GPMI_ECCCTRL_ECC_CMD__ENCODE_4_BIT			1
-#define BV_GPMI_ECCCTRL_ECC_CMD__DECODE_8_BIT			2
-#define BV_GPMI_ECCCTRL_ECC_CMD__ENCODE_8_BIT			3
-
-#define HW_GPMI_CTRL1		0x60
-#define BM_GPMI_CTRL1_GPMI_MODE	0x00000001
-#define BP_GPMI_CTRL1_GPMI_MODE	0
-#define BM_GPMI_CTRL1_ATA_IRQRDY_POLARITY	0x00000004
-#define BM_GPMI_CTRL1_DEV_RESET	0x00000008
-#define BM_GPMI_CTRL1_TIMEOUT_IRQ	0x00000200
-#define BM_GPMI_CTRL1_DEV_IRQ	0x00000400
-#define BM_GPMI_CTRL1_RDN_DELAY	0x0000F000
-#define BP_GPMI_CTRL1_RDN_DELAY	12
-#define BM_GPMI_CTRL1_BCH_MODE	0x00040000
-
-#define HW_GPMI_TIMING0		0x70
-#define BM_GPMI_TIMING0_DATA_SETUP	0x000000FF
-#define BP_GPMI_TIMING0_DATA_SETUP	0
-#define BM_GPMI_TIMING0_DATA_HOLD	0x0000FF00
-#define BP_GPMI_TIMING0_DATA_HOLD	8
-#define BM_GPMI_TIMING0_ADDRESS_SETUP	0x00FF0000
-#define BP_GPMI_TIMING0_ADDRESS_SETUP	16
-
-#define HW_GPMI_TIMING1		0x80
-#define BM_GPMI_TIMING1_DEVICE_BUSY_TIMEOUT	0xFFFF0000
-#define BP_GPMI_TIMING1_DEVICE_BUSY_TIMEOUT	16
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-i2c.h b/arch/arm/mach-stmp378x/include/mach/regs-i2c.h
deleted file mode 100644
index 13a234c9943..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-i2c.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * stmp378x: I2C register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-#define REGS_I2C_BASE	(STMP3XXX_REGS_BASE + 0x58000)
-#define REGS_I2C_PHYS	0x80058000
-#define REGS_I2C_SIZE	0x2000
-
-#define HW_I2C_CTRL0		0x0
-#define BM_I2C_CTRL0_XFER_COUNT	0x0000FFFF
-#define BP_I2C_CTRL0_XFER_COUNT	0
-#define BM_I2C_CTRL0_DIRECTION	0x00010000
-#define BM_I2C_CTRL0_MASTER_MODE	0x00020000
-#define BM_I2C_CTRL0_PRE_SEND_START	0x00080000
-#define BM_I2C_CTRL0_POST_SEND_STOP	0x00100000
-#define BM_I2C_CTRL0_RETAIN_CLOCK	0x00200000
-#define BM_I2C_CTRL0_SEND_NAK_ON_LAST	0x02000000
-#define BM_I2C_CTRL0_CLKGATE	0x40000000
-#define BM_I2C_CTRL0_SFTRST	0x80000000
-
-#define HW_I2C_TIMING0		0x10
-
-#define HW_I2C_TIMING1		0x20
-
-#define HW_I2C_TIMING2		0x30
-
-#define HW_I2C_CTRL1		0x40
-#define BM_I2C_CTRL1_SLAVE_IRQ	0x00000001
-#define BP_I2C_CTRL1_SLAVE_IRQ	0
-#define BM_I2C_CTRL1_SLAVE_STOP_IRQ	0x00000002
-#define BM_I2C_CTRL1_MASTER_LOSS_IRQ	0x00000004
-#define BM_I2C_CTRL1_EARLY_TERM_IRQ	0x00000008
-#define BM_I2C_CTRL1_OVERSIZE_XFER_TERM_IRQ	0x00000010
-#define BM_I2C_CTRL1_NO_SLAVE_ACK_IRQ	0x00000020
-#define BM_I2C_CTRL1_DATA_ENGINE_CMPLT_IRQ	0x00000040
-#define BM_I2C_CTRL1_BUS_FREE_IRQ	0x00000080
-#define BM_I2C_CTRL1_CLR_GOT_A_NAK	0x10000000
-
-#define HW_I2C_VERSION		0x90
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-icoll.h b/arch/arm/mach-stmp378x/include/mach/regs-icoll.h
deleted file mode 100644
index f996e80f40e..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-icoll.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * stmp378x: ICOLL register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-#ifndef _MACH_REGS_ICOLL
-#define _MACH_REGS_ICOLL
-
-#define REGS_ICOLL_BASE	(STMP3XXX_REGS_BASE + 0x0)
-#define REGS_ICOLL_PHYS	0x80000000
-#define REGS_ICOLL_SIZE	0x2000
-
-#define HW_ICOLL_VECTOR		0x0
-
-#define HW_ICOLL_LEVELACK	0x10
-#define BM_ICOLL_LEVELACK_IRQLEVELACK	0x0000000F
-#define BP_ICOLL_LEVELACK_IRQLEVELACK	0
-
-#define HW_ICOLL_CTRL		0x20
-#define BM_ICOLL_CTRL_CLKGATE	0x40000000
-#define BM_ICOLL_CTRL_SFTRST	0x80000000
-
-#define HW_ICOLL_STAT		0x70
-
-#define HW_ICOLL_INTERRUPTn	0x120
-
-#define HW_ICOLL_INTERRUPTn	0x120
-#define BM_ICOLL_INTERRUPTn_ENABLE	0x00000004
-
-#endif
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-ir.h b/arch/arm/mach-stmp378x/include/mach/regs-ir.h
deleted file mode 100644
index a5b4ef10fab..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-ir.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * stmp378x: IR register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-#define REGS_IR_BASE	(STMP3XXX_REGS_BASE + 0x78000)
-#define REGS_IR_PHYS	0x80078000
-#define REGS_IR_SIZE	0x2000
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-lcdif.h b/arch/arm/mach-stmp378x/include/mach/regs-lcdif.h
deleted file mode 100644
index 9cdbef4badc..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-lcdif.h
+++ /dev/null
@@ -1,195 +0,0 @@
-/*
- * stmp378x: LCDIF register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-#define REGS_LCDIF_BASE	(STMP3XXX_REGS_BASE + 0x30000)
-#define REGS_LCDIF_PHYS	0x80030000
-#define REGS_LCDIF_SIZE	0x2000
-
-#define HW_LCDIF_CTRL		0x0
-#define BM_LCDIF_CTRL_RUN	0x00000001
-#define BP_LCDIF_CTRL_RUN	0
-#define BM_LCDIF_CTRL_LCDIF_MASTER	0x00000020
-#define BM_LCDIF_CTRL_RGB_TO_YCBCR422_CSC	0x00000080
-#define BM_LCDIF_CTRL_WORD_LENGTH	0x00000300
-#define BP_LCDIF_CTRL_WORD_LENGTH	8
-#define BM_LCDIF_CTRL_LCD_DATABUS_WIDTH	0x00000C00
-#define BP_LCDIF_CTRL_LCD_DATABUS_WIDTH	10
-#define BM_LCDIF_CTRL_INPUT_DATA_SWIZZLE	0x0000C000
-#define BP_LCDIF_CTRL_INPUT_DATA_SWIZZLE	14
-#define BM_LCDIF_CTRL_DATA_SELECT	0x00010000
-#define BM_LCDIF_CTRL_DOTCLK_MODE	0x00020000
-#define BM_LCDIF_CTRL_VSYNC_MODE	0x00040000
-#define BM_LCDIF_CTRL_BYPASS_COUNT	0x00080000
-#define BM_LCDIF_CTRL_DVI_MODE	0x00100000
-#define BM_LCDIF_CTRL_SHIFT_NUM_BITS	0x03E00000
-#define BP_LCDIF_CTRL_SHIFT_NUM_BITS	21
-#define BM_LCDIF_CTRL_DATA_SHIFT_DIR	0x04000000
-#define BM_LCDIF_CTRL_WAIT_FOR_VSYNC_EDGE	0x08000000
-#define BM_LCDIF_CTRL_CLKGATE	0x40000000
-#define BM_LCDIF_CTRL_SFTRST	0x80000000
-
-#define HW_LCDIF_CTRL1		0x10
-#define BM_LCDIF_CTRL1_RESET	0x00000001
-#define BP_LCDIF_CTRL1_RESET	0
-#define BM_LCDIF_CTRL1_MODE86	0x00000002
-#define BM_LCDIF_CTRL1_BUSY_ENABLE	0x00000004
-#define BM_LCDIF_CTRL1_VSYNC_EDGE_IRQ	0x00000100
-#define BM_LCDIF_CTRL1_CUR_FRAME_DONE_IRQ	0x00000200
-#define BM_LCDIF_CTRL1_UNDERFLOW_IRQ	0x00000400
-#define BM_LCDIF_CTRL1_OVERFLOW_IRQ	0x00000800
-#define BM_LCDIF_CTRL1_VSYNC_EDGE_IRQ_EN	0x00001000
-#define BM_LCDIF_CTRL1_BYTE_PACKING_FORMAT	0x000F0000
-#define BP_LCDIF_CTRL1_BYTE_PACKING_FORMAT	16
-#define BM_LCDIF_CTRL1_INTERLACE_FIELDS	0x00800000
-#define BM_LCDIF_CTRL1_RECOVER_ON_UNDERFLOW	0x01000000
-
-#define HW_LCDIF_TRANSFER_COUNT	0x20
-#define BM_LCDIF_TRANSFER_COUNT_H_COUNT	0x0000FFFF
-#define BP_LCDIF_TRANSFER_COUNT_H_COUNT	0
-#define BM_LCDIF_TRANSFER_COUNT_V_COUNT	0xFFFF0000
-#define BP_LCDIF_TRANSFER_COUNT_V_COUNT	16
-
-#define HW_LCDIF_CUR_BUF	0x30
-
-#define HW_LCDIF_NEXT_BUF	0x40
-
-#define HW_LCDIF_TIMING		0x60
-
-#define HW_LCDIF_VDCTRL0	0x70
-#define BM_LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH	0x0003FFFF
-#define BP_LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH	0
-#define BM_LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH_UNIT	0x00100000
-#define BM_LCDIF_VDCTRL0_VSYNC_PERIOD_UNIT	0x00200000
-#define BM_LCDIF_VDCTRL0_ENABLE_POL	0x01000000
-#define BM_LCDIF_VDCTRL0_DOTCLK_POL	0x02000000
-#define BM_LCDIF_VDCTRL0_HSYNC_POL	0x04000000
-#define BM_LCDIF_VDCTRL0_VSYNC_POL	0x08000000
-#define BM_LCDIF_VDCTRL0_ENABLE_PRESENT	0x10000000
-#define BM_LCDIF_VDCTRL0_VSYNC_OEB	0x20000000
-
-#define HW_LCDIF_VDCTRL1	0x80
-#define BM_LCDIF_VDCTRL1_VSYNC_PERIOD	0xFFFFFFFF
-#define BP_LCDIF_VDCTRL1_VSYNC_PERIOD	0
-
-#define HW_LCDIF_VDCTRL2	0x90
-#define BM_LCDIF_VDCTRL2_HSYNC_PERIOD	0x0003FFFF
-#define BP_LCDIF_VDCTRL2_HSYNC_PERIOD	0
-#define BM_LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH	0xFF000000
-#define BP_LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH	24
-
-#define HW_LCDIF_VDCTRL3	0xA0
-#define BM_LCDIF_VDCTRL3_VERTICAL_WAIT_CNT	0x0000FFFF
-#define BP_LCDIF_VDCTRL3_VERTICAL_WAIT_CNT	0
-#define BM_LCDIF_VDCTRL3_HORIZONTAL_WAIT_CNT	0x0FFF0000
-#define BP_LCDIF_VDCTRL3_HORIZONTAL_WAIT_CNT	16
-
-#define HW_LCDIF_VDCTRL4	0xB0
-#define BM_LCDIF_VDCTRL4_DOTCLK_H_VALID_DATA_CNT	0x0003FFFF
-#define BP_LCDIF_VDCTRL4_DOTCLK_H_VALID_DATA_CNT	0
-#define BM_LCDIF_VDCTRL4_SYNC_SIGNALS_ON	0x00040000
-
-#define HW_LCDIF_DVICTRL0	0xC0
-#define BM_LCDIF_DVICTRL0_V_LINES_CNT	0x000003FF
-#define BP_LCDIF_DVICTRL0_V_LINES_CNT	0
-#define BM_LCDIF_DVICTRL0_H_BLANKING_CNT	0x000FFC00
-#define BP_LCDIF_DVICTRL0_H_BLANKING_CNT	10
-#define BM_LCDIF_DVICTRL0_H_ACTIVE_CNT	0x7FF00000
-#define BP_LCDIF_DVICTRL0_H_ACTIVE_CNT	20
-
-#define HW_LCDIF_DVICTRL1	0xD0
-#define BM_LCDIF_DVICTRL1_F2_START_LINE	0x000003FF
-#define BP_LCDIF_DVICTRL1_F2_START_LINE	0
-#define BM_LCDIF_DVICTRL1_F1_END_LINE	0x000FFC00
-#define BP_LCDIF_DVICTRL1_F1_END_LINE	10
-#define BM_LCDIF_DVICTRL1_F1_START_LINE	0x3FF00000
-#define BP_LCDIF_DVICTRL1_F1_START_LINE	20
-
-#define HW_LCDIF_DVICTRL2	0xE0
-#define BM_LCDIF_DVICTRL2_V1_BLANK_END_LINE	0x000003FF
-#define BP_LCDIF_DVICTRL2_V1_BLANK_END_LINE	0
-#define BM_LCDIF_DVICTRL2_V1_BLANK_START_LINE	0x000FFC00
-#define BP_LCDIF_DVICTRL2_V1_BLANK_START_LINE	10
-#define BM_LCDIF_DVICTRL2_F2_END_LINE	0x3FF00000
-#define BP_LCDIF_DVICTRL2_F2_END_LINE	20
-
-#define HW_LCDIF_DVICTRL3	0xF0
-#define BM_LCDIF_DVICTRL3_V2_BLANK_END_LINE	0x000003FF
-#define BP_LCDIF_DVICTRL3_V2_BLANK_END_LINE	0
-#define BM_LCDIF_DVICTRL3_V2_BLANK_START_LINE	0x03FF0000
-#define BP_LCDIF_DVICTRL3_V2_BLANK_START_LINE	16
-
-#define HW_LCDIF_DVICTRL4	0x100
-#define BM_LCDIF_DVICTRL4_H_FILL_CNT	0x000000FF
-#define BP_LCDIF_DVICTRL4_H_FILL_CNT	0
-#define BM_LCDIF_DVICTRL4_CR_FILL_VALUE	0x0000FF00
-#define BP_LCDIF_DVICTRL4_CR_FILL_VALUE	8
-#define BM_LCDIF_DVICTRL4_CB_FILL_VALUE	0x00FF0000
-#define BP_LCDIF_DVICTRL4_CB_FILL_VALUE	16
-#define BM_LCDIF_DVICTRL4_Y_FILL_VALUE	0xFF000000
-#define BP_LCDIF_DVICTRL4_Y_FILL_VALUE	24
-
-#define HW_LCDIF_CSC_COEFF0	0x110
-#define BM_LCDIF_CSC_COEFF0_CSC_SUBSAMPLE_FILTER	0x00000003
-#define BP_LCDIF_CSC_COEFF0_CSC_SUBSAMPLE_FILTER	0
-#define BM_LCDIF_CSC_COEFF0_C0	0x03FF0000
-#define BP_LCDIF_CSC_COEFF0_C0	16
-
-#define HW_LCDIF_CSC_COEFF1	0x120
-#define BM_LCDIF_CSC_COEFF1_C1	0x000003FF
-#define BP_LCDIF_CSC_COEFF1_C1	0
-#define BM_LCDIF_CSC_COEFF1_C2	0x03FF0000
-#define BP_LCDIF_CSC_COEFF1_C2	16
-
-#define HW_LCDIF_CSC_COEFF2	0x130
-#define BM_LCDIF_CSC_COEFF2_C3	0x000003FF
-#define BP_LCDIF_CSC_COEFF2_C3	0
-#define BM_LCDIF_CSC_COEFF2_C4	0x03FF0000
-#define BP_LCDIF_CSC_COEFF2_C4	16
-
-#define HW_LCDIF_CSC_COEFF3	0x140
-#define BM_LCDIF_CSC_COEFF3_C5	0x000003FF
-#define BP_LCDIF_CSC_COEFF3_C5	0
-#define BM_LCDIF_CSC_COEFF3_C6	0x03FF0000
-#define BP_LCDIF_CSC_COEFF3_C6	16
-
-#define HW_LCDIF_CSC_COEFF4	0x150
-#define BM_LCDIF_CSC_COEFF4_C7	0x000003FF
-#define BP_LCDIF_CSC_COEFF4_C7	0
-#define BM_LCDIF_CSC_COEFF4_C8	0x03FF0000
-#define BP_LCDIF_CSC_COEFF4_C8	16
-
-#define HW_LCDIF_CSC_OFFSET	0x160
-#define BM_LCDIF_CSC_OFFSET_Y_OFFSET	0x000001FF
-#define BP_LCDIF_CSC_OFFSET_Y_OFFSET	0
-#define BM_LCDIF_CSC_OFFSET_CBCR_OFFSET	0x01FF0000
-#define BP_LCDIF_CSC_OFFSET_CBCR_OFFSET	16
-
-#define HW_LCDIF_CSC_LIMIT	0x170
-#define BM_LCDIF_CSC_LIMIT_Y_MAX	0x000000FF
-#define BP_LCDIF_CSC_LIMIT_Y_MAX	0
-#define BM_LCDIF_CSC_LIMIT_Y_MIN	0x0000FF00
-#define BP_LCDIF_CSC_LIMIT_Y_MIN	8
-#define BM_LCDIF_CSC_LIMIT_CBCR_MAX	0x00FF0000
-#define BP_LCDIF_CSC_LIMIT_CBCR_MAX	16
-#define BM_LCDIF_CSC_LIMIT_CBCR_MIN	0xFF000000
-#define BP_LCDIF_CSC_LIMIT_CBCR_MIN	24
-
-#define HW_LCDIF_STAT		0x1D0
-#define BM_LCDIF_STAT_TXFIFO_EMPTY	0x04000000
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-lradc.h b/arch/arm/mach-stmp378x/include/mach/regs-lradc.h
deleted file mode 100644
index cb8cb06f827..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-lradc.h
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * stmp378x: LRADC register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-#define REGS_LRADC_BASE	(STMP3XXX_REGS_BASE + 0x50000)
-#define REGS_LRADC_PHYS	0x80050000
-#define REGS_LRADC_SIZE	0x2000
-
-#define HW_LRADC_CTRL0		0x0
-#define BM_LRADC_CTRL0_SCHEDULE	0x000000FF
-#define BP_LRADC_CTRL0_SCHEDULE	0
-#define BM_LRADC_CTRL0_XPLUS_ENABLE	0x00010000
-#define BM_LRADC_CTRL0_YPLUS_ENABLE	0x00020000
-#define BM_LRADC_CTRL0_XMINUS_ENABLE	0x00040000
-#define BM_LRADC_CTRL0_YMINUS_ENABLE	0x00080000
-#define BM_LRADC_CTRL0_TOUCH_DETECT_ENABLE	0x00100000
-#define BM_LRADC_CTRL0_ONCHIP_GROUNDREF	0x00200000
-#define BM_LRADC_CTRL0_CLKGATE	0x40000000
-#define BM_LRADC_CTRL0_SFTRST	0x80000000
-
-#define HW_LRADC_CTRL1		0x10
-#define BM_LRADC_CTRL1_LRADC0_IRQ	0x00000001
-#define BP_LRADC_CTRL1_LRADC0_IRQ	0
-#define BM_LRADC_CTRL1_LRADC5_IRQ	0x00000020
-#define BM_LRADC_CTRL1_LRADC6_IRQ	0x00000040
-#define BM_LRADC_CTRL1_TOUCH_DETECT_IRQ	0x00000100
-#define BM_LRADC_CTRL1_LRADC0_IRQ_EN	0x00010000
-#define BM_LRADC_CTRL1_LRADC5_IRQ_EN	0x00200000
-#define BM_LRADC_CTRL1_TOUCH_DETECT_IRQ_EN	0x01000000
-
-#define HW_LRADC_CTRL2		0x20
-#define BM_LRADC_CTRL2_BL_BRIGHTNESS	0x001F0000
-#define BP_LRADC_CTRL2_BL_BRIGHTNESS	16
-#define BM_LRADC_CTRL2_BL_MUX_SELECT	0x00200000
-#define BM_LRADC_CTRL2_BL_ENABLE	0x00400000
-#define BM_LRADC_CTRL2_DIVIDE_BY_TWO	0xFF000000
-#define BP_LRADC_CTRL2_DIVIDE_BY_TWO	24
-
-#define HW_LRADC_CTRL3		0x30
-#define BM_LRADC_CTRL3_CYCLE_TIME	0x00000300
-#define BP_LRADC_CTRL3_CYCLE_TIME	8
-
-#define HW_LRADC_STATUS		0x40
-#define BM_LRADC_STATUS_TOUCH_DETECT_RAW	0x00000001
-#define BP_LRADC_STATUS_TOUCH_DETECT_RAW	0
-
-#define HW_LRADC_CH0		(0x50 + 0 * 0x10)
-#define HW_LRADC_CH1		(0x50 + 1 * 0x10)
-#define HW_LRADC_CH2		(0x50 + 2 * 0x10)
-#define HW_LRADC_CH3		(0x50 + 3 * 0x10)
-#define HW_LRADC_CH4		(0x50 + 4 * 0x10)
-#define HW_LRADC_CH5		(0x50 + 5 * 0x10)
-#define HW_LRADC_CH6		(0x50 + 6 * 0x10)
-#define HW_LRADC_CH7		(0x50 + 7 * 0x10)
-
-#define HW_LRADC_CHn		0x50
-#define BM_LRADC_CHn_VALUE	0x0003FFFF
-#define BP_LRADC_CHn_VALUE	0
-#define BM_LRADC_CHn_NUM_SAMPLES	0x1F000000
-#define BP_LRADC_CHn_NUM_SAMPLES	24
-#define BM_LRADC_CHn_ACCUMULATE	0x20000000
-
-#define HW_LRADC_DELAY0		(0xD0 + 0 * 0x10)
-#define HW_LRADC_DELAY1		(0xD0 + 1 * 0x10)
-#define HW_LRADC_DELAY2		(0xD0 + 2 * 0x10)
-#define HW_LRADC_DELAY3		(0xD0 + 3 * 0x10)
-
-#define HW_LRADC_DELAYn		0xD0
-#define BM_LRADC_DELAYn_DELAY	0x000007FF
-#define BP_LRADC_DELAYn_DELAY	0
-#define BM_LRADC_DELAYn_LOOP_COUNT	0x0000F800
-#define BP_LRADC_DELAYn_LOOP_COUNT	11
-#define BM_LRADC_DELAYn_TRIGGER_DELAYS	0x000F0000
-#define BP_LRADC_DELAYn_TRIGGER_DELAYS	16
-#define BM_LRADC_DELAYn_KICK	0x00100000
-#define BM_LRADC_DELAYn_TRIGGER_LRADCS	0xFF000000
-#define BP_LRADC_DELAYn_TRIGGER_LRADCS	24
-
-#define HW_LRADC_CTRL4		0x140
-#define BM_LRADC_CTRL4_LRADC6SELECT	0x0F000000
-#define BP_LRADC_CTRL4_LRADC6SELECT	24
-#define BM_LRADC_CTRL4_LRADC7SELECT	0xF0000000
-#define BP_LRADC_CTRL4_LRADC7SELECT	28
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-ocotp.h b/arch/arm/mach-stmp378x/include/mach/regs-ocotp.h
deleted file mode 100644
index f0af64d9937..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-ocotp.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * stmp378x: OCOTP register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-#define REGS_OCOTP_BASE	(STMP3XXX_REGS_BASE + 0x2C000)
-#define REGS_OCOTP_PHYS	0x8002C000
-#define REGS_OCOTP_SIZE	0x2000
-
-#define HW_OCOTP_CTRL		0x0
-#define BM_OCOTP_CTRL_BUSY	0x00000100
-#define BM_OCOTP_CTRL_ERROR	0x00000200
-#define BM_OCOTP_CTRL_RD_BANK_OPEN	0x00001000
-#define BM_OCOTP_CTRL_RELOAD_SHADOWS	0x00002000
-#define BM_OCOTP_CTRL_WR_UNLOCK	0xFFFF0000
-#define BP_OCOTP_CTRL_WR_UNLOCK	16
-
-#define HW_OCOTP_DATA		0x10
-
-#define HW_OCOTP_CUST0		(0x20 + 0 * 0x10)
-#define HW_OCOTP_CUST1		(0x20 + 1 * 0x10)
-#define HW_OCOTP_CUST2		(0x20 + 2 * 0x10)
-#define HW_OCOTP_CUST3		(0x20 + 3 * 0x10)
-
-#define HW_OCOTP_CUSTn		0x20
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-pinctrl.h b/arch/arm/mach-stmp378x/include/mach/regs-pinctrl.h
deleted file mode 100644
index 50d90ea1b13..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-pinctrl.h
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- * stmp378x: PINCTRL register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-#ifndef _MACH_REGS_PINCTRL
-#define _MACH_REGS_PINCTRL
-
-#define REGS_PINCTRL_BASE	(STMP3XXX_REGS_BASE + 0x18000)
-#define REGS_PINCTRL_PHYS	0x80018000
-#define REGS_PINCTRL_SIZE	0x2000
-
-#define HW_PINCTRL_MUXSEL0	0x100
-#define HW_PINCTRL_MUXSEL1	0x110
-#define HW_PINCTRL_MUXSEL2	0x120
-#define HW_PINCTRL_MUXSEL3	0x130
-#define HW_PINCTRL_MUXSEL4	0x140
-#define HW_PINCTRL_MUXSEL5	0x150
-#define HW_PINCTRL_MUXSEL6	0x160
-#define HW_PINCTRL_MUXSEL7	0x170
-
-#define HW_PINCTRL_DRIVE0	0x200
-#define HW_PINCTRL_DRIVE1	0x210
-#define HW_PINCTRL_DRIVE2	0x220
-#define HW_PINCTRL_DRIVE3	0x230
-#define HW_PINCTRL_DRIVE4	0x240
-#define HW_PINCTRL_DRIVE5	0x250
-#define HW_PINCTRL_DRIVE6	0x260
-#define HW_PINCTRL_DRIVE7	0x270
-#define HW_PINCTRL_DRIVE8	0x280
-#define HW_PINCTRL_DRIVE9	0x290
-#define HW_PINCTRL_DRIVE10	0x2A0
-#define HW_PINCTRL_DRIVE11	0x2B0
-#define HW_PINCTRL_DRIVE12	0x2C0
-#define HW_PINCTRL_DRIVE13	0x2D0
-#define HW_PINCTRL_DRIVE14	0x2E0
-
-#define HW_PINCTRL_PULL0	0x400
-#define HW_PINCTRL_PULL1	0x410
-#define HW_PINCTRL_PULL2	0x420
-#define HW_PINCTRL_PULL3	0x430
-
-#define HW_PINCTRL_DOUT0	0x500
-#define HW_PINCTRL_DOUT1	0x510
-#define HW_PINCTRL_DOUT2	0x520
-
-#define HW_PINCTRL_DIN0		0x600
-#define HW_PINCTRL_DIN1		0x610
-#define HW_PINCTRL_DIN2		0x620
-
-#define HW_PINCTRL_DOE0		0x700
-#define HW_PINCTRL_DOE1		0x710
-#define HW_PINCTRL_DOE2		0x720
-
-#define HW_PINCTRL_PIN2IRQ0	0x800
-#define HW_PINCTRL_PIN2IRQ1	0x810
-#define HW_PINCTRL_PIN2IRQ2	0x820
-
-#define HW_PINCTRL_IRQEN0	0x900
-#define HW_PINCTRL_IRQEN1	0x910
-#define HW_PINCTRL_IRQEN2	0x920
-
-#define HW_PINCTRL_IRQLEVEL0	0xA00
-#define HW_PINCTRL_IRQLEVEL1	0xA10
-#define HW_PINCTRL_IRQLEVEL2	0xA20
-
-#define HW_PINCTRL_IRQPOL0	0xB00
-#define HW_PINCTRL_IRQPOL1	0xB10
-#define HW_PINCTRL_IRQPOL2	0xB20
-
-#define HW_PINCTRL_IRQSTAT0	0xC00
-#define HW_PINCTRL_IRQSTAT1	0xC10
-#define HW_PINCTRL_IRQSTAT2	0xC20
-
-#endif
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-power.h b/arch/arm/mach-stmp378x/include/mach/regs-power.h
deleted file mode 100644
index e454c830f07..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-power.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * stmp378x: POWER register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-#ifndef _MACH_REGS_POWER
-#define _MACH_REGS_POWER
-
-#define REGS_POWER_BASE	(STMP3XXX_REGS_BASE + 0x44000)
-#define REGS_POWER_PHYS	0x80044000
-#define REGS_POWER_SIZE	0x2000
-
-#define HW_POWER_CTRL		0x0
-#define BM_POWER_CTRL_ENIRQ_VDD5V_GT_VDDIO	0x00000001
-#define BP_POWER_CTRL_ENIRQ_VDD5V_GT_VDDIO	0
-#define BM_POWER_CTRL_ENIRQ_PSWITCH	0x00020000
-#define BM_POWER_CTRL_PSWITCH_IRQ	0x00100000
-#define BM_POWER_CTRL_CLKGATE	0x40000000
-
-#define HW_POWER_5VCTRL		0x10
-#define BM_POWER_5VCTRL_ENABLE_LINREG_ILIMIT	0x00000040
-
-#define HW_POWER_MINPWR		0x20
-
-#define HW_POWER_CHARGE		0x30
-
-#define HW_POWER_VDDDCTRL	0x40
-
-#define HW_POWER_VDDACTRL	0x50
-
-#define HW_POWER_VDDIOCTRL	0x60
-#define BM_POWER_VDDIOCTRL_TRG	0x0000001F
-#define BP_POWER_VDDIOCTRL_TRG	0
-
-#define HW_POWER_STS		0xC0
-#define BM_POWER_STS_VBUSVALID	0x00000002
-#define BM_POWER_STS_BVALID	0x00000004
-#define BM_POWER_STS_AVALID	0x00000008
-#define BM_POWER_STS_DC_OK	0x00000200
-
-#define HW_POWER_RESET		0x100
-
-#define HW_POWER_DEBUG		0x110
-#define BM_POWER_DEBUG_BVALIDPIOLOCK	0x00000002
-#define BM_POWER_DEBUG_AVALIDPIOLOCK	0x00000004
-#define BM_POWER_DEBUG_VBUSVALIDPIOLOCK	0x00000008
-
-#endif
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-pwm.h b/arch/arm/mach-stmp378x/include/mach/regs-pwm.h
deleted file mode 100644
index 0d0f9e56ec7..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-pwm.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * stmp378x: PWM register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-#define REGS_PWM_BASE	(STMP3XXX_REGS_BASE + 0x64000)
-#define REGS_PWM_PHYS	0x80064000
-#define REGS_PWM_SIZE	0x2000
-
-#define HW_PWM_CTRL		0x0
-#define BM_PWM_CTRL_PWM2_ENABLE	0x00000004
-#define BM_PWM_CTRL_PWM2_ANA_CTRL_ENABLE	0x00000020
-
-#define HW_PWM_ACTIVE0		(0x10 + 0 * 0x20)
-#define HW_PWM_ACTIVE1		(0x10 + 1 * 0x20)
-#define HW_PWM_ACTIVE2		(0x10 + 2 * 0x20)
-#define HW_PWM_ACTIVE3		(0x10 + 3 * 0x20)
-
-#define HW_PWM_ACTIVEn		0x10
-#define BM_PWM_ACTIVEn_ACTIVE	0x0000FFFF
-#define BP_PWM_ACTIVEn_ACTIVE	0
-#define BM_PWM_ACTIVEn_INACTIVE	0xFFFF0000
-#define BP_PWM_ACTIVEn_INACTIVE	16
-
-#define HW_PWM_PERIOD0		(0x20 + 0 * 0x20)
-#define HW_PWM_PERIOD1		(0x20 + 1 * 0x20)
-#define HW_PWM_PERIOD2		(0x20 + 2 * 0x20)
-#define HW_PWM_PERIOD3		(0x20 + 3 * 0x20)
-
-#define HW_PWM_PERIODn		0x20
-#define BM_PWM_PERIODn_PERIOD	0x0000FFFF
-#define BP_PWM_PERIODn_PERIOD	0
-#define BM_PWM_PERIODn_ACTIVE_STATE	0x00030000
-#define BP_PWM_PERIODn_ACTIVE_STATE	16
-#define BM_PWM_PERIODn_INACTIVE_STATE	0x000C0000
-#define BP_PWM_PERIODn_INACTIVE_STATE	18
-#define BM_PWM_PERIODn_CDIV	0x00700000
-#define BP_PWM_PERIODn_CDIV	20
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-pxp.h b/arch/arm/mach-stmp378x/include/mach/regs-pxp.h
deleted file mode 100644
index 54d297896de..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-pxp.h
+++ /dev/null
@@ -1,140 +0,0 @@
-/*
- * stmp378x: PXP register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-#define REGS_PXP_BASE	(STMP3XXX_REGS_BASE + 0x2A000)
-#define REGS_PXP_PHYS	0x8002A000
-#define REGS_PXP_SIZE	0x2000
-
-#define HW_PXP_CTRL		0x0
-#define BM_PXP_CTRL_ENABLE	0x00000001
-#define BP_PXP_CTRL_ENABLE	0
-#define BM_PXP_CTRL_IRQ_ENABLE	0x00000002
-#define BM_PXP_CTRL_OUTPUT_RGB_FORMAT	0x000000F0
-#define BP_PXP_CTRL_OUTPUT_RGB_FORMAT	4
-#define BM_PXP_CTRL_ROTATE	0x00000300
-#define BP_PXP_CTRL_ROTATE	8
-#define BM_PXP_CTRL_HFLIP	0x00000400
-#define BM_PXP_CTRL_VFLIP	0x00000800
-#define BM_PXP_CTRL_S0_FORMAT	0x0000F000
-#define BP_PXP_CTRL_S0_FORMAT	12
-#define BM_PXP_CTRL_SCALE	0x00040000
-#define BM_PXP_CTRL_CROP	0x00080000
-
-#define HW_PXP_STAT		0x10
-#define BM_PXP_STAT_IRQ		0x00000001
-#define BP_PXP_STAT_IRQ		0
-
-#define HW_PXP_RGBBUF		0x20
-
-#define HW_PXP_RGBSIZE		0x40
-#define BM_PXP_RGBSIZE_HEIGHT	0x00000FFF
-#define BP_PXP_RGBSIZE_HEIGHT	0
-#define BM_PXP_RGBSIZE_WIDTH	0x00FFF000
-#define BP_PXP_RGBSIZE_WIDTH	12
-
-#define HW_PXP_S0BUF		0x50
-
-#define HW_PXP_S0UBUF		0x60
-
-#define HW_PXP_S0VBUF		0x70
-
-#define HW_PXP_S0PARAM		0x80
-#define BM_PXP_S0PARAM_HEIGHT	0x000000FF
-#define BP_PXP_S0PARAM_HEIGHT	0
-#define BM_PXP_S0PARAM_WIDTH	0x0000FF00
-#define BP_PXP_S0PARAM_WIDTH	8
-#define BM_PXP_S0PARAM_YBASE	0x00FF0000
-#define BP_PXP_S0PARAM_YBASE	16
-#define BM_PXP_S0PARAM_XBASE	0xFF000000
-#define BP_PXP_S0PARAM_XBASE	24
-
-#define HW_PXP_S0BACKGROUND	0x90
-
-#define HW_PXP_S0CROP		0xA0
-#define BM_PXP_S0CROP_HEIGHT	0x000000FF
-#define BP_PXP_S0CROP_HEIGHT	0
-#define BM_PXP_S0CROP_WIDTH	0x0000FF00
-#define BP_PXP_S0CROP_WIDTH	8
-#define BM_PXP_S0CROP_YBASE	0x00FF0000
-#define BP_PXP_S0CROP_YBASE	16
-#define BM_PXP_S0CROP_XBASE	0xFF000000
-#define BP_PXP_S0CROP_XBASE	24
-
-#define HW_PXP_S0SCALE		0xB0
-#define BM_PXP_S0SCALE_XSCALE	0x00003FFF
-#define BP_PXP_S0SCALE_XSCALE	0
-#define BM_PXP_S0SCALE_YSCALE	0x3FFF0000
-#define BP_PXP_S0SCALE_YSCALE	16
-
-#define HW_PXP_CSCCOEFF0	0xD0
-
-#define HW_PXP_CSCCOEFF1	0xE0
-
-#define HW_PXP_CSCCOEFF2	0xF0
-
-#define HW_PXP_S0COLORKEYLOW	0x180
-
-#define HW_PXP_S0COLORKEYHIGH	0x190
-
-#define HW_PXP_OL0		(0x200 + 0 * 0x40)
-#define HW_PXP_OL1		(0x200 + 1 * 0x40)
-#define HW_PXP_OL2		(0x200 + 2 * 0x40)
-#define HW_PXP_OL3		(0x200 + 3 * 0x40)
-#define HW_PXP_OL4		(0x200 + 4 * 0x40)
-#define HW_PXP_OL5		(0x200 + 5 * 0x40)
-#define HW_PXP_OL6		(0x200 + 6 * 0x40)
-#define HW_PXP_OL7		(0x200 + 7 * 0x40)
-
-#define HW_PXP_OLn		0x200
-
-#define HW_PXP_OL0SIZE		(0x210 + 0 * 0x40)
-#define HW_PXP_OL1SIZE		(0x210 + 1 * 0x40)
-#define HW_PXP_OL2SIZE		(0x210 + 2 * 0x40)
-#define HW_PXP_OL3SIZE		(0x210 + 3 * 0x40)
-#define HW_PXP_OL4SIZE		(0x210 + 4 * 0x40)
-#define HW_PXP_OL5SIZE		(0x210 + 5 * 0x40)
-#define HW_PXP_OL6SIZE		(0x210 + 6 * 0x40)
-#define HW_PXP_OL7SIZE		(0x210 + 7 * 0x40)
-
-#define HW_PXP_OLnSIZE		0x210
-#define BM_PXP_OLnSIZE_HEIGHT	0x000000FF
-#define BP_PXP_OLnSIZE_HEIGHT	0
-#define BM_PXP_OLnSIZE_WIDTH	0x0000FF00
-#define BP_PXP_OLnSIZE_WIDTH	8
-
-#define HW_PXP_OL0PARAM		(0x220 + 0 * 0x40)
-#define HW_PXP_OL1PARAM		(0x220 + 1 * 0x40)
-#define HW_PXP_OL2PARAM		(0x220 + 2 * 0x40)
-#define HW_PXP_OL3PARAM		(0x220 + 3 * 0x40)
-#define HW_PXP_OL4PARAM		(0x220 + 4 * 0x40)
-#define HW_PXP_OL5PARAM		(0x220 + 5 * 0x40)
-#define HW_PXP_OL6PARAM		(0x220 + 6 * 0x40)
-#define HW_PXP_OL7PARAM		(0x220 + 7 * 0x40)
-
-#define HW_PXP_OLnPARAM		0x220
-#define BM_PXP_OLnPARAM_ENABLE	0x00000001
-#define BP_PXP_OLnPARAM_ENABLE	0
-#define BM_PXP_OLnPARAM_ALPHA_CNTL	0x00000006
-#define BP_PXP_OLnPARAM_ALPHA_CNTL	1
-#define BM_PXP_OLnPARAM_ENABLE_COLORKEY	0x00000008
-#define BM_PXP_OLnPARAM_FORMAT	0x000000F0
-#define BP_PXP_OLnPARAM_FORMAT	4
-#define BM_PXP_OLnPARAM_ALPHA	0x0000FF00
-#define BP_PXP_OLnPARAM_ALPHA	8
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-rtc.h b/arch/arm/mach-stmp378x/include/mach/regs-rtc.h
deleted file mode 100644
index b8dbd6742d9..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-rtc.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * stmp378x: RTC register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-#define REGS_RTC_BASE	(STMP3XXX_REGS_BASE + 0x5C000)
-#define REGS_RTC_PHYS	0x8005C000
-#define REGS_RTC_SIZE	0x2000
-
-#define HW_RTC_CTRL		0x0
-#define BM_RTC_CTRL_ALARM_IRQ_EN	0x00000001
-#define BP_RTC_CTRL_ALARM_IRQ_EN	0
-#define BM_RTC_CTRL_ONEMSEC_IRQ_EN	0x00000002
-#define BM_RTC_CTRL_ALARM_IRQ	0x00000004
-#define BM_RTC_CTRL_ONEMSEC_IRQ	0x00000008
-#define BM_RTC_CTRL_WATCHDOGEN	0x00000010
-
-#define HW_RTC_STAT		0x10
-#define BM_RTC_STAT_NEW_REGS	0x0000FF00
-#define BP_RTC_STAT_NEW_REGS	8
-#define BM_RTC_STAT_STALE_REGS	0x00FF0000
-#define BP_RTC_STAT_STALE_REGS	16
-#define BM_RTC_STAT_RTC_PRESENT	0x80000000
-
-#define HW_RTC_SECONDS		0x30
-
-#define HW_RTC_ALARM		0x40
-
-#define HW_RTC_WATCHDOG		0x50
-
-#define HW_RTC_PERSISTENT0	0x60
-#define BM_RTC_PERSISTENT0_ALARM_WAKE_EN	0x00000002
-#define BM_RTC_PERSISTENT0_ALARM_EN	0x00000004
-#define BM_RTC_PERSISTENT0_XTAL24MHZ_PWRUP	0x00000010
-#define BM_RTC_PERSISTENT0_XTAL32KHZ_PWRUP	0x00000020
-#define BM_RTC_PERSISTENT0_ALARM_WAKE	0x00000080
-#define BM_RTC_PERSISTENT0_SPARE_ANALOG	0xFFFC0000
-#define BP_RTC_PERSISTENT0_SPARE_ANALOG	18
-
-#define HW_RTC_PERSISTENT1	0x70
-#define BM_RTC_PERSISTENT1_GENERAL	0xFFFFFFFF
-#define BP_RTC_PERSISTENT1_GENERAL	0
-
-#define HW_RTC_VERSION		0xD0
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-saif.h b/arch/arm/mach-stmp378x/include/mach/regs-saif.h
deleted file mode 100644
index 6df41762c2a..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-saif.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * stmp378x: SAIF register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-#define REGS_SAIF_SIZE	0x2000
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-spdif.h b/arch/arm/mach-stmp378x/include/mach/regs-spdif.h
deleted file mode 100644
index 801539848c2..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-spdif.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * stmp378x: SPDIF register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-#define REGS_SPDIF_BASE	(STMP3XXX_REGS_BASE + 0x54000)
-#define REGS_SPDIF_PHYS	0x80054000
-#define REGS_SPDIF_SIZE	0x2000
-
-#define HW_SPDIF_CTRL		0x0
-#define BM_SPDIF_CTRL_RUN	0x00000001
-#define BP_SPDIF_CTRL_RUN	0
-#define BM_SPDIF_CTRL_FIFO_ERROR_IRQ_EN	0x00000002
-#define BM_SPDIF_CTRL_FIFO_OVERFLOW_IRQ	0x00000004
-#define BM_SPDIF_CTRL_FIFO_UNDERFLOW_IRQ	0x00000008
-#define BM_SPDIF_CTRL_WORD_LENGTH	0x00000010
-#define BM_SPDIF_CTRL_CLKGATE	0x40000000
-#define BM_SPDIF_CTRL_SFTRST	0x80000000
-
-#define HW_SPDIF_STAT		0x10
-
-#define HW_SPDIF_FRAMECTRL	0x20
-
-#define HW_SPDIF_SRR		0x30
-#define BM_SPDIF_SRR_RATE	0x000FFFFF
-#define BP_SPDIF_SRR_RATE	0
-#define BM_SPDIF_SRR_BASEMULT	0x70000000
-#define BP_SPDIF_SRR_BASEMULT	28
-
-#define HW_SPDIF_DEBUG		0x40
-
-#define HW_SPDIF_DATA		0x50
-
-#define HW_SPDIF_VERSION	0x60
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-ssp.h b/arch/arm/mach-stmp378x/include/mach/regs-ssp.h
deleted file mode 100644
index 28aacf0f58e..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-ssp.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * stmp378x: SSP register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-#define REGS_SSP1_BASE	(STMP3XXX_REGS_BASE + 0x10000)
-#define REGS_SSP1_PHYS	0x80010000
-#define REGS_SSP2_BASE	(STMP3XXX_REGS_BASE + 0x34000)
-#define REGS_SSP2_PHYS	0x80034000
-#define REGS_SSP_SIZE	0x2000
-
-#define HW_SSP_CTRL0		0x0
-#define BM_SSP_CTRL0_XFER_COUNT	0x0000FFFF
-#define BP_SSP_CTRL0_XFER_COUNT	0
-#define BM_SSP_CTRL0_ENABLE	0x00010000
-#define BM_SSP_CTRL0_GET_RESP	0x00020000
-#define BM_SSP_CTRL0_LONG_RESP	0x00080000
-#define BM_SSP_CTRL0_WAIT_FOR_CMD	0x00100000
-#define BM_SSP_CTRL0_WAIT_FOR_IRQ	0x00200000
-#define BM_SSP_CTRL0_BUS_WIDTH	0x00C00000
-#define BP_SSP_CTRL0_BUS_WIDTH	22
-#define BM_SSP_CTRL0_DATA_XFER	0x01000000
-#define BM_SSP_CTRL0_READ	0x02000000
-#define BM_SSP_CTRL0_IGNORE_CRC	0x04000000
-#define BM_SSP_CTRL0_LOCK_CS	0x08000000
-#define BM_SSP_CTRL0_RUN	0x20000000
-#define BM_SSP_CTRL0_CLKGATE	0x40000000
-#define BM_SSP_CTRL0_SFTRST	0x80000000
-
-#define HW_SSP_CMD0		0x10
-#define BM_SSP_CMD0_CMD		0x000000FF
-#define BP_SSP_CMD0_CMD		0
-#define BM_SSP_CMD0_BLOCK_COUNT	0x0000FF00
-#define BP_SSP_CMD0_BLOCK_COUNT	8
-#define BM_SSP_CMD0_BLOCK_SIZE	0x000F0000
-#define BP_SSP_CMD0_BLOCK_SIZE	16
-#define BM_SSP_CMD0_APPEND_8CYC	0x00100000
-#define BM_SSP_CMD1_CMD_ARG	0xFFFFFFFF
-#define BP_SSP_CMD1_CMD_ARG	0
-
-#define HW_SSP_TIMING		0x50
-#define BM_SSP_TIMING_CLOCK_RATE	0x000000FF
-#define BP_SSP_TIMING_CLOCK_RATE	0
-#define BM_SSP_TIMING_CLOCK_DIVIDE	0x0000FF00
-#define BP_SSP_TIMING_CLOCK_DIVIDE	8
-#define BM_SSP_TIMING_TIMEOUT	0xFFFF0000
-#define BP_SSP_TIMING_TIMEOUT	16
-
-#define HW_SSP_CTRL1		0x60
-#define BM_SSP_CTRL1_SSP_MODE	0x0000000F
-#define BP_SSP_CTRL1_SSP_MODE	0
-#define BM_SSP_CTRL1_WORD_LENGTH	0x000000F0
-#define BP_SSP_CTRL1_WORD_LENGTH	4
-#define BM_SSP_CTRL1_POLARITY	0x00000200
-#define BM_SSP_CTRL1_PHASE	0x00000400
-#define BM_SSP_CTRL1_DMA_ENABLE	0x00002000
-#define BM_SSP_CTRL1_FIFO_OVERRUN_IRQ	0x00008000
-#define BM_SSP_CTRL1_RECV_TIMEOUT_IRQ_EN	0x00010000
-#define BM_SSP_CTRL1_RECV_TIMEOUT_IRQ	0x00020000
-#define BM_SSP_CTRL1_FIFO_UNDERRUN_IRQ	0x00200000
-#define BM_SSP_CTRL1_DATA_CRC_IRQ_EN	0x00400000
-#define BM_SSP_CTRL1_DATA_CRC_IRQ	0x00800000
-#define BM_SSP_CTRL1_DATA_TIMEOUT_IRQ_EN	0x01000000
-#define BM_SSP_CTRL1_DATA_TIMEOUT_IRQ	0x02000000
-#define BM_SSP_CTRL1_RESP_TIMEOUT_IRQ_EN	0x04000000
-#define BM_SSP_CTRL1_RESP_TIMEOUT_IRQ	0x08000000
-#define BM_SSP_CTRL1_RESP_ERR_IRQ_EN	0x10000000
-#define BM_SSP_CTRL1_RESP_ERR_IRQ	0x20000000
-#define BM_SSP_CTRL1_SDIO_IRQ	0x80000000
-
-#define HW_SSP_DATA		0x70
-
-#define HW_SSP_SDRESP0		0x80
-
-#define HW_SSP_SDRESP1		0x90
-
-#define HW_SSP_SDRESP2		0xA0
-
-#define HW_SSP_SDRESP3		0xB0
-
-#define HW_SSP_STATUS		0xC0
-#define BM_SSP_STATUS_FIFO_EMPTY	0x00000020
-#define BM_SSP_STATUS_TIMEOUT	0x00001000
-#define BM_SSP_STATUS_RESP_TIMEOUT	0x00004000
-#define BM_SSP_STATUS_RESP_ERR	0x00008000
-#define BM_SSP_STATUS_RESP_CRC_ERR	0x00010000
-#define BM_SSP_STATUS_CARD_DETECT	0x10000000
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-sydma.h b/arch/arm/mach-stmp378x/include/mach/regs-sydma.h
deleted file mode 100644
index 08343a8b556..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-sydma.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * stmp378x: SYDMA register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-#define REGS_SYDMA_BASE	(STMP3XXX_REGS_BASE + 0x26000)
-#define REGS_SYDMA_PHYS	0x80026000
-#define REGS_SYDMA_SIZE	0x2000
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-timrot.h b/arch/arm/mach-stmp378x/include/mach/regs-timrot.h
deleted file mode 100644
index b5527957c67..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-timrot.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * stmp378x: TIMROT register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-#ifndef _MACH_REGS_TIMROT
-#define _MACH_REGS_TIMROT
-
-#define REGS_TIMROT_BASE	(STMP3XXX_REGS_BASE + 0x68000)
-#define REGS_TIMROT_PHYS	0x80068000
-#define REGS_TIMROT_SIZE	0x2000
-
-#define HW_TIMROT_ROTCTRL	0x0
-#define BM_TIMROT_ROTCTRL_SELECT_A	0x00000007
-#define BP_TIMROT_ROTCTRL_SELECT_A	0
-#define BM_TIMROT_ROTCTRL_SELECT_B	0x00000070
-#define BP_TIMROT_ROTCTRL_SELECT_B	4
-#define BM_TIMROT_ROTCTRL_POLARITY_A	0x00000100
-#define BM_TIMROT_ROTCTRL_POLARITY_B	0x00000200
-#define BM_TIMROT_ROTCTRL_OVERSAMPLE	0x00000C00
-#define BP_TIMROT_ROTCTRL_OVERSAMPLE	10
-#define BM_TIMROT_ROTCTRL_RELATIVE	0x00001000
-#define BM_TIMROT_ROTCTRL_DIVIDER	0x003F0000
-#define BP_TIMROT_ROTCTRL_DIVIDER	16
-#define BM_TIMROT_ROTCTRL_ROTARY_PRESENT	0x20000000
-#define BM_TIMROT_ROTCTRL_CLKGATE	0x40000000
-#define BM_TIMROT_ROTCTRL_SFTRST	0x80000000
-
-#define HW_TIMROT_ROTCOUNT	0x10
-#define BM_TIMROT_ROTCOUNT_UPDOWN	0x0000FFFF
-#define BP_TIMROT_ROTCOUNT_UPDOWN	0
-
-#define HW_TIMROT_TIMCTRL0	(0x20 + 0 * 0x20)
-#define HW_TIMROT_TIMCTRL1	(0x20 + 1 * 0x20)
-#define HW_TIMROT_TIMCTRL2	(0x20 + 2 * 0x20)
-
-#define HW_TIMROT_TIMCTRLn	0x20
-#define BM_TIMROT_TIMCTRLn_SELECT	0x0000000F
-#define BP_TIMROT_TIMCTRLn_SELECT	0
-#define BM_TIMROT_TIMCTRLn_PRESCALE	0x00000030
-#define BP_TIMROT_TIMCTRLn_PRESCALE	4
-#define BM_TIMROT_TIMCTRLn_RELOAD	0x00000040
-#define BM_TIMROT_TIMCTRLn_UPDATE	0x00000080
-#define BM_TIMROT_TIMCTRLn_IRQ_EN	0x00004000
-#define BM_TIMROT_TIMCTRLn_IRQ	0x00008000
-
-#define HW_TIMROT_TIMCOUNT0	(0x30 + 0 * 0x20)
-#define HW_TIMROT_TIMCOUNT1	(0x30 + 1 * 0x20)
-#define HW_TIMROT_TIMCOUNT2	(0x30 + 2 * 0x20)
-
-#define HW_TIMROT_TIMCOUNTn	0x30
-
-#endif
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-tvenc.h b/arch/arm/mach-stmp378x/include/mach/regs-tvenc.h
deleted file mode 100644
index 7f895cb3435..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-tvenc.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * stmp378x: TVENC register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-#define REGS_TVENC_BASE	(STMP3XXX_REGS_BASE + 0x38000)
-#define REGS_TVENC_PHYS	0x80038000
-#define REGS_TVENC_SIZE	0x2000
-
-#define HW_TVENC_CTRL		0x0
-#define BM_TVENC_CTRL_CLKGATE	0x40000000
-#define BM_TVENC_CTRL_SFTRST	0x80000000
-
-#define HW_TVENC_CONFIG		0x10
-#define BM_TVENC_CONFIG_ENCD_MODE	0x00000007
-#define BP_TVENC_CONFIG_ENCD_MODE	0
-#define BM_TVENC_CONFIG_SYNC_MODE	0x00000070
-#define BP_TVENC_CONFIG_SYNC_MODE	4
-#define BM_TVENC_CONFIG_FSYNC_PHS	0x00000200
-#define BM_TVENC_CONFIG_CGAIN	0x0000C000
-#define BP_TVENC_CONFIG_CGAIN	14
-#define BM_TVENC_CONFIG_YGAIN_SEL	0x00030000
-#define BP_TVENC_CONFIG_YGAIN_SEL	16
-#define BM_TVENC_CONFIG_PAL_SHAPE	0x00100000
-
-#define HW_TVENC_SYNCOFFSET	0x30
-
-#define HW_TVENC_COLORSUB0	0xC0
-
-#define HW_TVENC_COLORBURST	0x140
-#define BM_TVENC_COLORBURST_PBA	0x00FF0000
-#define BP_TVENC_COLORBURST_PBA	16
-#define BM_TVENC_COLORBURST_NBA	0xFF000000
-#define BP_TVENC_COLORBURST_NBA	24
-
-#define HW_TVENC_MACROVISION0	0x150
-
-#define HW_TVENC_MACROVISION1	0x160
-
-#define HW_TVENC_MACROVISION2	0x170
-
-#define HW_TVENC_MACROVISION3	0x180
-
-#define HW_TVENC_MACROVISION4	0x190
-
-#define HW_TVENC_DACCTRL	0x1A0
-#define BM_TVENC_DACCTRL_RVAL	0x00000070
-#define BP_TVENC_DACCTRL_RVAL	4
-#define BM_TVENC_DACCTRL_DUMP_TOVDD1	0x00000100
-#define BM_TVENC_DACCTRL_PWRUP1	0x00001000
-#define BM_TVENC_DACCTRL_GAINUP	0x00040000
-#define BM_TVENC_DACCTRL_GAINDN	0x00080000
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-uartapp.h b/arch/arm/mach-stmp378x/include/mach/regs-uartapp.h
deleted file mode 100644
index a251e68bb3a..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-uartapp.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * stmp378x: UARTAPP register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-#define REGS_UARTAPP1_BASE	(STMP3XXX_REGS_BASE + 0x6C000)
-#define REGS_UARTAPP1_PHYS	0x8006C000
-#define REGS_UARTAPP2_BASE	(STMP3XXX_REGS_BASE + 0x6E000)
-#define REGS_UARTAPP2_PHYS	0x8006E000
-#define REGS_UARTAPP_SIZE	0x2000
-
-#define HW_UARTAPP_CTRL0	0x0
-#define BM_UARTAPP_CTRL0_XFER_COUNT	0x0000FFFF
-#define BP_UARTAPP_CTRL0_XFER_COUNT	0
-#define BM_UARTAPP_CTRL0_RXTIMEOUT	0x07FF0000
-#define BP_UARTAPP_CTRL0_RXTIMEOUT	16
-#define BM_UARTAPP_CTRL0_RXTO_ENABLE	0x08000000
-#define BM_UARTAPP_CTRL0_RUN	0x20000000
-#define BM_UARTAPP_CTRL0_SFTRST	0x80000000
-#define BM_UARTAPP_CTRL1_XFER_COUNT	0x0000FFFF
-#define BP_UARTAPP_CTRL1_XFER_COUNT	0
-#define BM_UARTAPP_CTRL1_RUN	0x10000000
-
-#define HW_UARTAPP_CTRL2	0x20
-#define BM_UARTAPP_CTRL2_UARTEN	0x00000001
-#define BP_UARTAPP_CTRL2_UARTEN	0
-#define BM_UARTAPP_CTRL2_TXE	0x00000100
-#define BM_UARTAPP_CTRL2_RXE	0x00000200
-#define BM_UARTAPP_CTRL2_RTS	0x00000800
-#define BM_UARTAPP_CTRL2_RTSEN	0x00004000
-#define BM_UARTAPP_CTRL2_CTSEN	0x00008000
-#define BM_UARTAPP_CTRL2_RXDMAE	0x01000000
-#define BM_UARTAPP_CTRL2_TXDMAE	0x02000000
-#define BM_UARTAPP_CTRL2_DMAONERR	0x04000000
-
-#define HW_UARTAPP_LINECTRL	0x30
-#define BM_UARTAPP_LINECTRL_BRK	0x00000001
-#define BP_UARTAPP_LINECTRL_BRK	0
-#define BM_UARTAPP_LINECTRL_PEN	0x00000002
-#define BM_UARTAPP_LINECTRL_EPS	0x00000004
-#define BM_UARTAPP_LINECTRL_STP2	0x00000008
-#define BM_UARTAPP_LINECTRL_FEN	0x00000010
-#define BM_UARTAPP_LINECTRL_WLEN	0x00000060
-#define BP_UARTAPP_LINECTRL_WLEN	5
-#define BM_UARTAPP_LINECTRL_SPS	0x00000080
-#define BM_UARTAPP_LINECTRL_BAUD_DIVFRAC	0x00003F00
-#define BP_UARTAPP_LINECTRL_BAUD_DIVFRAC	8
-#define BM_UARTAPP_LINECTRL_BAUD_DIVINT	0xFFFF0000
-#define BP_UARTAPP_LINECTRL_BAUD_DIVINT	16
-
-#define HW_UARTAPP_INTR		0x50
-#define BM_UARTAPP_INTR_CTSMIS	0x00000002
-#define BM_UARTAPP_INTR_RTIS	0x00000040
-#define BM_UARTAPP_INTR_CTSMIEN	0x00020000
-#define BM_UARTAPP_INTR_RXIEN	0x00100000
-#define BM_UARTAPP_INTR_RTIEN	0x00400000
-
-#define HW_UARTAPP_DATA		0x60
-
-#define HW_UARTAPP_STAT		0x70
-#define BM_UARTAPP_STAT_RXCOUNT	0x0000FFFF
-#define BP_UARTAPP_STAT_RXCOUNT	0
-#define BM_UARTAPP_STAT_FERR	0x00010000
-#define BM_UARTAPP_STAT_PERR	0x00020000
-#define BM_UARTAPP_STAT_BERR	0x00040000
-#define BM_UARTAPP_STAT_OERR	0x00080000
-#define BM_UARTAPP_STAT_RXFE	0x01000000
-#define BM_UARTAPP_STAT_TXFF	0x02000000
-#define BM_UARTAPP_STAT_TXFE	0x08000000
-#define BM_UARTAPP_STAT_CTS	0x10000000
-
-#define HW_UARTAPP_VERSION	0x90
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-uartdbg.h b/arch/arm/mach-stmp378x/include/mach/regs-uartdbg.h
deleted file mode 100644
index b810deb552a..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-uartdbg.h
+++ /dev/null
@@ -1,268 +0,0 @@
-/*
- * stmp378x: UARTDBG register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-#define REGS_UARTDBG_BASE	(STMP3XXX_REGS_BASE + 0x70000)
-#define REGS_UARTDBG_PHYS	0x80070000
-#define REGS_UARTDBG_SIZE	0x2000
-
-#define HW_UARTDBGDR 0x00000000
-#define BP_UARTDBGDR_UNAVAILABLE      16
-#define BM_UARTDBGDR_UNAVAILABLE 0xFFFF0000
-#define BF_UARTDBGDR_UNAVAILABLE(v) \
-	(((v) << 16) & BM_UARTDBGDR_UNAVAILABLE)
-#define BP_UARTDBGDR_RESERVED      12
-#define BM_UARTDBGDR_RESERVED 0x0000F000
-#define BF_UARTDBGDR_RESERVED(v)  \
-	(((v) << 12) & BM_UARTDBGDR_RESERVED)
-#define BM_UARTDBGDR_OE 0x00000800
-#define BM_UARTDBGDR_BE 0x00000400
-#define BM_UARTDBGDR_PE 0x00000200
-#define BM_UARTDBGDR_FE 0x00000100
-#define BP_UARTDBGDR_DATA      0
-#define BM_UARTDBGDR_DATA 0x000000FF
-#define BF_UARTDBGDR_DATA(v)  \
-	(((v) << 0) & BM_UARTDBGDR_DATA)
-#define HW_UARTDBGRSR_ECR 0x00000004
-#define BP_UARTDBGRSR_ECR_UNAVAILABLE      8
-#define BM_UARTDBGRSR_ECR_UNAVAILABLE 0xFFFFFF00
-#define BF_UARTDBGRSR_ECR_UNAVAILABLE(v) \
-	(((v) << 8) & BM_UARTDBGRSR_ECR_UNAVAILABLE)
-#define BP_UARTDBGRSR_ECR_EC      4
-#define BM_UARTDBGRSR_ECR_EC 0x000000F0
-#define BF_UARTDBGRSR_ECR_EC(v)  \
-	(((v) << 4) & BM_UARTDBGRSR_ECR_EC)
-#define BM_UARTDBGRSR_ECR_OE 0x00000008
-#define BM_UARTDBGRSR_ECR_BE 0x00000004
-#define BM_UARTDBGRSR_ECR_PE 0x00000002
-#define BM_UARTDBGRSR_ECR_FE 0x00000001
-#define HW_UARTDBGFR 0x00000018
-#define BP_UARTDBGFR_UNAVAILABLE      16
-#define BM_UARTDBGFR_UNAVAILABLE 0xFFFF0000
-#define BF_UARTDBGFR_UNAVAILABLE(v) \
-	(((v) << 16) & BM_UARTDBGFR_UNAVAILABLE)
-#define BP_UARTDBGFR_RESERVED      9
-#define BM_UARTDBGFR_RESERVED 0x0000FE00
-#define BF_UARTDBGFR_RESERVED(v)  \
-	(((v) << 9) & BM_UARTDBGFR_RESERVED)
-#define BM_UARTDBGFR_RI 0x00000100
-#define BM_UARTDBGFR_TXFE 0x00000080
-#define BM_UARTDBGFR_RXFF 0x00000040
-#define BM_UARTDBGFR_TXFF 0x00000020
-#define BM_UARTDBGFR_RXFE 0x00000010
-#define BM_UARTDBGFR_BUSY 0x00000008
-#define BM_UARTDBGFR_DCD 0x00000004
-#define BM_UARTDBGFR_DSR 0x00000002
-#define BM_UARTDBGFR_CTS 0x00000001
-#define HW_UARTDBGILPR 0x00000020
-#define BP_UARTDBGILPR_UNAVAILABLE      8
-#define BM_UARTDBGILPR_UNAVAILABLE 0xFFFFFF00
-#define BF_UARTDBGILPR_UNAVAILABLE(v) \
-	(((v) << 8) & BM_UARTDBGILPR_UNAVAILABLE)
-#define BP_UARTDBGILPR_ILPDVSR      0
-#define BM_UARTDBGILPR_ILPDVSR 0x000000FF
-#define BF_UARTDBGILPR_ILPDVSR(v)  \
-	(((v) << 0) & BM_UARTDBGILPR_ILPDVSR)
-#define HW_UARTDBGIBRD 0x00000024
-#define BP_UARTDBGIBRD_UNAVAILABLE      16
-#define BM_UARTDBGIBRD_UNAVAILABLE 0xFFFF0000
-#define BF_UARTDBGIBRD_UNAVAILABLE(v) \
-	(((v) << 16) & BM_UARTDBGIBRD_UNAVAILABLE)
-#define BP_UARTDBGIBRD_BAUD_DIVINT      0
-#define BM_UARTDBGIBRD_BAUD_DIVINT 0x0000FFFF
-#define BF_UARTDBGIBRD_BAUD_DIVINT(v)  \
-	(((v) << 0) & BM_UARTDBGIBRD_BAUD_DIVINT)
-#define HW_UARTDBGFBRD 0x00000028
-#define BP_UARTDBGFBRD_UNAVAILABLE      8
-#define BM_UARTDBGFBRD_UNAVAILABLE 0xFFFFFF00
-#define BF_UARTDBGFBRD_UNAVAILABLE(v) \
-	(((v) << 8) & BM_UARTDBGFBRD_UNAVAILABLE)
-#define BP_UARTDBGFBRD_RESERVED      6
-#define BM_UARTDBGFBRD_RESERVED 0x000000C0
-#define BF_UARTDBGFBRD_RESERVED(v)  \
-	(((v) << 6) & BM_UARTDBGFBRD_RESERVED)
-#define BP_UARTDBGFBRD_BAUD_DIVFRAC      0
-#define BM_UARTDBGFBRD_BAUD_DIVFRAC 0x0000003F
-#define BF_UARTDBGFBRD_BAUD_DIVFRAC(v)  \
-	(((v) << 0) & BM_UARTDBGFBRD_BAUD_DIVFRAC)
-#define HW_UARTDBGLCR_H 0x0000002c
-#define BP_UARTDBGLCR_H_UNAVAILABLE      16
-#define BM_UARTDBGLCR_H_UNAVAILABLE 0xFFFF0000
-#define BF_UARTDBGLCR_H_UNAVAILABLE(v) \
-	(((v) << 16) & BM_UARTDBGLCR_H_UNAVAILABLE)
-#define BP_UARTDBGLCR_H_RESERVED      8
-#define BM_UARTDBGLCR_H_RESERVED 0x0000FF00
-#define BF_UARTDBGLCR_H_RESERVED(v)  \
-	(((v) << 8) & BM_UARTDBGLCR_H_RESERVED)
-#define BM_UARTDBGLCR_H_SPS 0x00000080
-#define BP_UARTDBGLCR_H_WLEN      5
-#define BM_UARTDBGLCR_H_WLEN 0x00000060
-#define BF_UARTDBGLCR_H_WLEN(v)  \
-	(((v) << 5) & BM_UARTDBGLCR_H_WLEN)
-#define BM_UARTDBGLCR_H_FEN 0x00000010
-#define BM_UARTDBGLCR_H_STP2 0x00000008
-#define BM_UARTDBGLCR_H_EPS 0x00000004
-#define BM_UARTDBGLCR_H_PEN 0x00000002
-#define BM_UARTDBGLCR_H_BRK 0x00000001
-#define HW_UARTDBGCR 0x00000030
-#define BP_UARTDBGCR_UNAVAILABLE      16
-#define BM_UARTDBGCR_UNAVAILABLE 0xFFFF0000
-#define BF_UARTDBGCR_UNAVAILABLE(v) \
-	(((v) << 16) & BM_UARTDBGCR_UNAVAILABLE)
-#define BM_UARTDBGCR_CTSEN 0x00008000
-#define BM_UARTDBGCR_RTSEN 0x00004000
-#define BM_UARTDBGCR_OUT2 0x00002000
-#define BM_UARTDBGCR_OUT1 0x00001000
-#define BM_UARTDBGCR_RTS 0x00000800
-#define BM_UARTDBGCR_DTR 0x00000400
-#define BM_UARTDBGCR_RXE 0x00000200
-#define BM_UARTDBGCR_TXE 0x00000100
-#define BM_UARTDBGCR_LBE 0x00000080
-#define BP_UARTDBGCR_RESERVED      3
-#define BM_UARTDBGCR_RESERVED 0x00000078
-#define BF_UARTDBGCR_RESERVED(v)  \
-	(((v) << 3) & BM_UARTDBGCR_RESERVED)
-#define BM_UARTDBGCR_SIRLP 0x00000004
-#define BM_UARTDBGCR_SIREN 0x00000002
-#define BM_UARTDBGCR_UARTEN 0x00000001
-#define HW_UARTDBGIFLS 0x00000034
-#define BP_UARTDBGIFLS_UNAVAILABLE      16
-#define BM_UARTDBGIFLS_UNAVAILABLE 0xFFFF0000
-#define BF_UARTDBGIFLS_UNAVAILABLE(v) \
-	(((v) << 16) & BM_UARTDBGIFLS_UNAVAILABLE)
-#define BP_UARTDBGIFLS_RESERVED      6
-#define BM_UARTDBGIFLS_RESERVED 0x0000FFC0
-#define BF_UARTDBGIFLS_RESERVED(v)  \
-	(((v) << 6) & BM_UARTDBGIFLS_RESERVED)
-#define BP_UARTDBGIFLS_RXIFLSEL      3
-#define BM_UARTDBGIFLS_RXIFLSEL 0x00000038
-#define BF_UARTDBGIFLS_RXIFLSEL(v)  \
-	(((v) << 3) & BM_UARTDBGIFLS_RXIFLSEL)
-#define BV_UARTDBGIFLS_RXIFLSEL__NOT_EMPTY      0x0
-#define BV_UARTDBGIFLS_RXIFLSEL__ONE_QUARTER    0x1
-#define BV_UARTDBGIFLS_RXIFLSEL__ONE_HALF       0x2
-#define BV_UARTDBGIFLS_RXIFLSEL__THREE_QUARTERS 0x3
-#define BV_UARTDBGIFLS_RXIFLSEL__SEVEN_EIGHTHS  0x4
-#define BV_UARTDBGIFLS_RXIFLSEL__INVALID5       0x5
-#define BV_UARTDBGIFLS_RXIFLSEL__INVALID6       0x6
-#define BV_UARTDBGIFLS_RXIFLSEL__INVALID7       0x7
-#define BP_UARTDBGIFLS_TXIFLSEL      0
-#define BM_UARTDBGIFLS_TXIFLSEL 0x00000007
-#define BF_UARTDBGIFLS_TXIFLSEL(v)  \
-	(((v) << 0) & BM_UARTDBGIFLS_TXIFLSEL)
-#define BV_UARTDBGIFLS_TXIFLSEL__EMPTY	  0x0
-#define BV_UARTDBGIFLS_TXIFLSEL__ONE_QUARTER    0x1
-#define BV_UARTDBGIFLS_TXIFLSEL__ONE_HALF       0x2
-#define BV_UARTDBGIFLS_TXIFLSEL__THREE_QUARTERS 0x3
-#define BV_UARTDBGIFLS_TXIFLSEL__SEVEN_EIGHTHS  0x4
-#define BV_UARTDBGIFLS_TXIFLSEL__INVALID5       0x5
-#define BV_UARTDBGIFLS_TXIFLSEL__INVALID6       0x6
-#define BV_UARTDBGIFLS_TXIFLSEL__INVALID7       0x7
-#define HW_UARTDBGIMSC 0x00000038
-#define BP_UARTDBGIMSC_UNAVAILABLE      16
-#define BM_UARTDBGIMSC_UNAVAILABLE 0xFFFF0000
-#define BF_UARTDBGIMSC_UNAVAILABLE(v) \
-	(((v) << 16) & BM_UARTDBGIMSC_UNAVAILABLE)
-#define BP_UARTDBGIMSC_RESERVED      11
-#define BM_UARTDBGIMSC_RESERVED 0x0000F800
-#define BF_UARTDBGIMSC_RESERVED(v)  \
-	(((v) << 11) & BM_UARTDBGIMSC_RESERVED)
-#define BM_UARTDBGIMSC_OEIM 0x00000400
-#define BM_UARTDBGIMSC_BEIM 0x00000200
-#define BM_UARTDBGIMSC_PEIM 0x00000100
-#define BM_UARTDBGIMSC_FEIM 0x00000080
-#define BM_UARTDBGIMSC_RTIM 0x00000040
-#define BM_UARTDBGIMSC_TXIM 0x00000020
-#define BM_UARTDBGIMSC_RXIM 0x00000010
-#define BM_UARTDBGIMSC_DSRMIM 0x00000008
-#define BM_UARTDBGIMSC_DCDMIM 0x00000004
-#define BM_UARTDBGIMSC_CTSMIM 0x00000002
-#define BM_UARTDBGIMSC_RIMIM 0x00000001
-#define HW_UARTDBGRIS 0x0000003c
-#define BP_UARTDBGRIS_UNAVAILABLE      16
-#define BM_UARTDBGRIS_UNAVAILABLE 0xFFFF0000
-#define BF_UARTDBGRIS_UNAVAILABLE(v) \
-	(((v) << 16) & BM_UARTDBGRIS_UNAVAILABLE)
-#define BP_UARTDBGRIS_RESERVED      11
-#define BM_UARTDBGRIS_RESERVED 0x0000F800
-#define BF_UARTDBGRIS_RESERVED(v)  \
-	(((v) << 11) & BM_UARTDBGRIS_RESERVED)
-#define BM_UARTDBGRIS_OERIS 0x00000400
-#define BM_UARTDBGRIS_BERIS 0x00000200
-#define BM_UARTDBGRIS_PERIS 0x00000100
-#define BM_UARTDBGRIS_FERIS 0x00000080
-#define BM_UARTDBGRIS_RTRIS 0x00000040
-#define BM_UARTDBGRIS_TXRIS 0x00000020
-#define BM_UARTDBGRIS_RXRIS 0x00000010
-#define BM_UARTDBGRIS_DSRRMIS 0x00000008
-#define BM_UARTDBGRIS_DCDRMIS 0x00000004
-#define BM_UARTDBGRIS_CTSRMIS 0x00000002
-#define BM_UARTDBGRIS_RIRMIS 0x00000001
-#define HW_UARTDBGMIS 0x00000040
-#define BP_UARTDBGMIS_UNAVAILABLE      16
-#define BM_UARTDBGMIS_UNAVAILABLE 0xFFFF0000
-#define BF_UARTDBGMIS_UNAVAILABLE(v) \
-	(((v) << 16) & BM_UARTDBGMIS_UNAVAILABLE)
-#define BP_UARTDBGMIS_RESERVED      11
-#define BM_UARTDBGMIS_RESERVED 0x0000F800
-#define BF_UARTDBGMIS_RESERVED(v)  \
-	(((v) << 11) & BM_UARTDBGMIS_RESERVED)
-#define BM_UARTDBGMIS_OEMIS 0x00000400
-#define BM_UARTDBGMIS_BEMIS 0x00000200
-#define BM_UARTDBGMIS_PEMIS 0x00000100
-#define BM_UARTDBGMIS_FEMIS 0x00000080
-#define BM_UARTDBGMIS_RTMIS 0x00000040
-#define BM_UARTDBGMIS_TXMIS 0x00000020
-#define BM_UARTDBGMIS_RXMIS 0x00000010
-#define BM_UARTDBGMIS_DSRMMIS 0x00000008
-#define BM_UARTDBGMIS_DCDMMIS 0x00000004
-#define BM_UARTDBGMIS_CTSMMIS 0x00000002
-#define BM_UARTDBGMIS_RIMMIS 0x00000001
-#define HW_UARTDBGICR 0x00000044
-#define BP_UARTDBGICR_UNAVAILABLE      16
-#define BM_UARTDBGICR_UNAVAILABLE 0xFFFF0000
-#define BF_UARTDBGICR_UNAVAILABLE(v) \
-	(((v) << 16) & BM_UARTDBGICR_UNAVAILABLE)
-#define BP_UARTDBGICR_RESERVED      11
-#define BM_UARTDBGICR_RESERVED 0x0000F800
-#define BF_UARTDBGICR_RESERVED(v)  \
-	(((v) << 11) & BM_UARTDBGICR_RESERVED)
-#define BM_UARTDBGICR_OEIC 0x00000400
-#define BM_UARTDBGICR_BEIC 0x00000200
-#define BM_UARTDBGICR_PEIC 0x00000100
-#define BM_UARTDBGICR_FEIC 0x00000080
-#define BM_UARTDBGICR_RTIC 0x00000040
-#define BM_UARTDBGICR_TXIC 0x00000020
-#define BM_UARTDBGICR_RXIC 0x00000010
-#define BM_UARTDBGICR_DSRMIC 0x00000008
-#define BM_UARTDBGICR_DCDMIC 0x00000004
-#define BM_UARTDBGICR_CTSMIC 0x00000002
-#define BM_UARTDBGICR_RIMIC 0x00000001
-#define HW_UARTDBGDMACR 0x00000048
-#define BP_UARTDBGDMACR_UNAVAILABLE      16
-#define BM_UARTDBGDMACR_UNAVAILABLE 0xFFFF0000
-#define BF_UARTDBGDMACR_UNAVAILABLE(v) \
-	(((v) << 16) & BM_UARTDBGDMACR_UNAVAILABLE)
-#define BP_UARTDBGDMACR_RESERVED      3
-#define BM_UARTDBGDMACR_RESERVED 0x0000FFF8
-#define BF_UARTDBGDMACR_RESERVED(v)  \
-	(((v) << 3) & BM_UARTDBGDMACR_RESERVED)
-#define BM_UARTDBGDMACR_DMAONERR 0x00000004
-#define BM_UARTDBGDMACR_TXDMAE 0x00000002
-#define BM_UARTDBGDMACR_RXDMAE 0x00000001
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-usbctrl.h b/arch/arm/mach-stmp378x/include/mach/regs-usbctrl.h
deleted file mode 100644
index 25112c1aa60..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-usbctrl.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * stmp378x: USBCTRL register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-#define REGS_USBCTRL_BASE	(STMP3XXX_REGS_BASE + 0x80000)
-#define REGS_USBCTRL_PHYS	0x80080000
-#define REGS_USBCTRL_SIZE	0x2000
-
-#define HW_USBCTRL_USBCMD	0x140
-#define BM_USBCTRL_USBCMD_RS	0x00000001
-#define BP_USBCTRL_USBCMD_RS	0
-#define BM_USBCTRL_USBCMD_RST	0x00000002
-
-#define HW_USBCTRL_USBINTR	0x148
-#define BM_USBCTRL_USBINTR_UE	0x00000001
-#define BP_USBCTRL_USBINTR_UE	0
-
-#define HW_USBCTRL_PORTSC1	0x184
-#define BM_USBCTRL_PORTSC1_PHCD	0x00800000
-
-#define HW_USBCTRL_OTGSC	0x1A4
-#define BM_USBCTRL_OTGSC_ID	0x00000100
-#define BM_USBCTRL_OTGSC_IDIS	0x00010000
-#define BM_USBCTRL_OTGSC_IDIE	0x01000000
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-usbphy.h b/arch/arm/mach-stmp378x/include/mach/regs-usbphy.h
deleted file mode 100644
index 11f3b732dc9..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-usbphy.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * stmp378x: USBPHY register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-#define REGS_USBPHY_BASE	(STMP3XXX_REGS_BASE + 0x7C000)
-#define REGS_USBPHY_PHYS	0x8007C000
-#define REGS_USBPHY_SIZE	0x2000
-
-#define HW_USBPHY_PWD		0x0
-
-#define HW_USBPHY_CTRL		0x30
-#define BM_USBPHY_CTRL_ENHOSTDISCONDETECT	0x00000002
-#define BM_USBPHY_CTRL_ENDEVPLUGINDETECT	0x00000010
-#define BM_USBPHY_CTRL_ENOTGIDDETECT	0x00000080
-#define BM_USBPHY_CTRL_ENIRQDEVPLUGIN	0x00000800
-#define BM_USBPHY_CTRL_CLKGATE	0x40000000
-#define BM_USBPHY_CTRL_SFTRST	0x80000000
-
-#define HW_USBPHY_STATUS	0x40
-#define BM_USBPHY_STATUS_DEVPLUGIN_STATUS	0x00000040
-#define BM_USBPHY_STATUS_OTGID_STATUS	0x00000100
diff --git a/arch/arm/mach-stmp378x/stmp378x.c b/arch/arm/mach-stmp378x/stmp378x.c
deleted file mode 100644
index c2f9fe04c11..00000000000
--- a/arch/arm/mach-stmp378x/stmp378x.c
+++ /dev/null
@@ -1,299 +0,0 @@
-/*
- * Freescale STMP378X platform support
- *
- * Embedded Alley Solutions, Inc <source@embeddedalley.com>
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/dma-mapping.h>
-
-#include <asm/dma.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-
-#include <mach/pins.h>
-#include <mach/pinmux.h>
-#include <mach/dma.h>
-#include <mach/hardware.h>
-#include <mach/system.h>
-#include <mach/platform.h>
-#include <mach/stmp3xxx.h>
-#include <mach/regs-icoll.h>
-#include <mach/regs-apbh.h>
-#include <mach/regs-apbx.h>
-#include <mach/regs-pxp.h>
-#include <mach/regs-i2c.h>
-
-#include "stmp378x.h"
-/*
- * IRQ handling
- */
-static void stmp378x_ack_irq(struct irq_data *d)
-{
-	/* Tell ICOLL to release IRQ line */
-	__raw_writel(0, REGS_ICOLL_BASE + HW_ICOLL_VECTOR);
-
-	/* ACK current interrupt */
-	__raw_writel(0x01 /* BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0 */,
-			REGS_ICOLL_BASE + HW_ICOLL_LEVELACK);
-
-	/* Barrier */
-	(void)__raw_readl(REGS_ICOLL_BASE + HW_ICOLL_STAT);
-}
-
-static void stmp378x_mask_irq(struct irq_data *d)
-{
-	/* IRQ disable */
-	stmp3xxx_clearl(BM_ICOLL_INTERRUPTn_ENABLE,
-			REGS_ICOLL_BASE + HW_ICOLL_INTERRUPTn + d->irq * 0x10);
-}
-
-static void stmp378x_unmask_irq(struct irq_data *d)
-{
-	/* IRQ enable */
-	stmp3xxx_setl(BM_ICOLL_INTERRUPTn_ENABLE,
-		      REGS_ICOLL_BASE + HW_ICOLL_INTERRUPTn + d->irq * 0x10);
-}
-
-static struct irq_chip stmp378x_chip = {
-	.irq_ack	= stmp378x_ack_irq,
-	.irq_mask	= stmp378x_mask_irq,
-	.irq_unmask	= stmp378x_unmask_irq,
-};
-
-void __init stmp378x_init_irq(void)
-{
-	stmp3xxx_init_irq(&stmp378x_chip);
-}
-
-/*
- * DMA interrupt handling
- */
-void stmp3xxx_arch_dma_enable_interrupt(int channel)
-{
-	void __iomem *c1, *c2;
-
-	switch (STMP3XXX_DMA_BUS(channel)) {
-	case STMP3XXX_BUS_APBH:
-		c1 = REGS_APBH_BASE + HW_APBH_CTRL1;
-		c2 = REGS_APBH_BASE + HW_APBH_CTRL2;
-		break;
-
-	case STMP3XXX_BUS_APBX:
-		c1 = REGS_APBX_BASE + HW_APBX_CTRL1;
-		c2 = REGS_APBX_BASE + HW_APBX_CTRL2;
-		break;
-
-	default:
-		return;
-	}
-	stmp3xxx_setl(1 << (16 + STMP3XXX_DMA_CHANNEL(channel)), c1);
-	stmp3xxx_setl(1 << (16 + STMP3XXX_DMA_CHANNEL(channel)), c2);
-}
-EXPORT_SYMBOL(stmp3xxx_arch_dma_enable_interrupt);
-
-void stmp3xxx_arch_dma_clear_interrupt(int channel)
-{
-	void __iomem *c1, *c2;
-
-	switch (STMP3XXX_DMA_BUS(channel)) {
-	case STMP3XXX_BUS_APBH:
-		c1 = REGS_APBH_BASE + HW_APBH_CTRL1;
-		c2 = REGS_APBH_BASE + HW_APBH_CTRL2;
-		break;
-
-	case STMP3XXX_BUS_APBX:
-		c1 = REGS_APBX_BASE + HW_APBX_CTRL1;
-		c2 = REGS_APBX_BASE + HW_APBX_CTRL2;
-		break;
-
-	default:
-		return;
-	}
-	stmp3xxx_clearl(1 << STMP3XXX_DMA_CHANNEL(channel), c1);
-	stmp3xxx_clearl(1 << STMP3XXX_DMA_CHANNEL(channel), c2);
-}
-EXPORT_SYMBOL(stmp3xxx_arch_dma_clear_interrupt);
-
-int stmp3xxx_arch_dma_is_interrupt(int channel)
-{
-	int r = 0;
-
-	switch (STMP3XXX_DMA_BUS(channel)) {
-	case STMP3XXX_BUS_APBH:
-		r = __raw_readl(REGS_APBH_BASE + HW_APBH_CTRL1) &
-			(1 << STMP3XXX_DMA_CHANNEL(channel));
-		break;
-
-	case STMP3XXX_BUS_APBX:
-		r = __raw_readl(REGS_APBX_BASE + HW_APBX_CTRL1) &
-			(1 << STMP3XXX_DMA_CHANNEL(channel));
-		break;
-	}
-	return r;
-}
-EXPORT_SYMBOL(stmp3xxx_arch_dma_is_interrupt);
-
-void stmp3xxx_arch_dma_reset_channel(int channel)
-{
-	unsigned chbit = 1 << STMP3XXX_DMA_CHANNEL(channel);
-	void __iomem *c0;
-	u32 mask;
-
-	switch (STMP3XXX_DMA_BUS(channel)) {
-	case STMP3XXX_BUS_APBH:
-		c0 = REGS_APBH_BASE + HW_APBH_CTRL0;
-		mask = chbit << BP_APBH_CTRL0_RESET_CHANNEL;
-		break;
-	case STMP3XXX_BUS_APBX:
-		c0 = REGS_APBX_BASE + HW_APBX_CHANNEL_CTRL;
-		mask = chbit << BP_APBX_CHANNEL_CTRL_RESET_CHANNEL;
-		break;
-	default:
-		return;
-	}
-
-	/* Reset channel and wait for it to complete */
-	stmp3xxx_setl(mask, c0);
-	while (__raw_readl(c0) & mask)
-		cpu_relax();
-}
-EXPORT_SYMBOL(stmp3xxx_arch_dma_reset_channel);
-
-void stmp3xxx_arch_dma_freeze(int channel)
-{
-	unsigned chbit = 1 << STMP3XXX_DMA_CHANNEL(channel);
-	u32 mask = 1 << chbit;
-
-	switch (STMP3XXX_DMA_BUS(channel)) {
-	case STMP3XXX_BUS_APBH:
-		stmp3xxx_setl(mask, REGS_APBH_BASE + HW_APBH_CTRL0);
-		break;
-	case STMP3XXX_BUS_APBX:
-		stmp3xxx_setl(mask, REGS_APBX_BASE + HW_APBX_CHANNEL_CTRL);
-		break;
-	}
-}
-EXPORT_SYMBOL(stmp3xxx_arch_dma_freeze);
-
-void stmp3xxx_arch_dma_unfreeze(int channel)
-{
-	unsigned chbit = 1 << STMP3XXX_DMA_CHANNEL(channel);
-	u32 mask = 1 << chbit;
-
-	switch (STMP3XXX_DMA_BUS(channel)) {
-	case STMP3XXX_BUS_APBH:
-		stmp3xxx_clearl(mask, REGS_APBH_BASE + HW_APBH_CTRL0);
-		break;
-	case STMP3XXX_BUS_APBX:
-		stmp3xxx_clearl(mask, REGS_APBX_BASE + HW_APBX_CHANNEL_CTRL);
-		break;
-	}
-}
-EXPORT_SYMBOL(stmp3xxx_arch_dma_unfreeze);
-
-/*
- * The registers are all very closely mapped, so we might as well map them all
- * with a single mapping
- *
- * Logical      Physical
- * f0000000	80000000	On-chip registers
- * f1000000	00000000	32k on-chip SRAM
- */
-
-static struct map_desc stmp378x_io_desc[] __initdata = {
-	{
-		.virtual	= (u32)STMP3XXX_REGS_BASE,
-		.pfn		= __phys_to_pfn(STMP3XXX_REGS_PHBASE),
-		.length		= STMP3XXX_REGS_SIZE,
-		.type		= MT_DEVICE,
-	},
-	{
-		.virtual	= (u32)STMP3XXX_OCRAM_BASE,
-		.pfn		= __phys_to_pfn(STMP3XXX_OCRAM_PHBASE),
-		.length		= STMP3XXX_OCRAM_SIZE,
-		.type		= MT_DEVICE,
-	},
-};
-
-
-static u64 common_dmamask = DMA_BIT_MASK(32);
-
-/*
- * devices that are present only on stmp378x, not on all 3xxx boards:
- * 	PxP
- * 	I2C
- */
-static struct resource pxp_resource[] = {
-	{
-		.flags	= IORESOURCE_MEM,
-		.start	= REGS_PXP_PHYS,
-		.end	= REGS_PXP_PHYS + REGS_PXP_SIZE,
-	}, {
-		.flags	= IORESOURCE_IRQ,
-		.start	= IRQ_PXP,
-		.end	= IRQ_PXP,
-	},
-};
-
-struct platform_device stmp378x_pxp = {
-	.name		= "stmp3xxx-pxp",
-	.id		= -1,
-	.dev		= {
-		.dma_mask		= &common_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.num_resources	= ARRAY_SIZE(pxp_resource),
-	.resource	= pxp_resource,
-};
-
-static struct resource i2c_resources[] = {
-	{
-		.flags = IORESOURCE_IRQ,
-		.start = IRQ_I2C_ERROR,
-		.end = IRQ_I2C_ERROR,
-	}, {
-		.flags = IORESOURCE_MEM,
-		.start = REGS_I2C_PHYS,
-		.end = REGS_I2C_PHYS + REGS_I2C_SIZE,
-	}, {
-		.flags = IORESOURCE_DMA,
-		.start = STMP3XXX_DMA(3, STMP3XXX_BUS_APBX),
-		.end = STMP3XXX_DMA(3, STMP3XXX_BUS_APBX),
-	},
-};
-
-struct platform_device stmp378x_i2c = {
-	.name = "i2c_stmp3xxx",
-	.id = 0,
-	.dev	= {
-		.dma_mask	= &common_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.resource = i2c_resources,
-	.num_resources = ARRAY_SIZE(i2c_resources),
-};
-
-void __init stmp378x_map_io(void)
-{
-	iotable_init(stmp378x_io_desc, ARRAY_SIZE(stmp378x_io_desc));
-}
diff --git a/arch/arm/mach-stmp378x/stmp378x.h b/arch/arm/mach-stmp378x/stmp378x.h
deleted file mode 100644
index 0dc15b3c891..00000000000
--- a/arch/arm/mach-stmp378x/stmp378x.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * Freescale STMP37XX/STMP378X internal functions and data declarations
- *
- * Embedded Alley Solutions, Inc <source@embeddedalley.com>
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#ifndef __MACH_STMP378X_H
-#define __MACH_STMP378X_H
-
-void stmp378x_map_io(void);
-void stmp378x_init_irq(void);
-
-extern struct platform_device stmp378x_pxp, stmp378x_i2c;
-#endif /* __MACH_STMP378X_COMMON_H */
diff --git a/arch/arm/mach-stmp378x/stmp378x_devb.c b/arch/arm/mach-stmp378x/stmp378x_devb.c
deleted file mode 100644
index 06158848afd..00000000000
--- a/arch/arm/mach-stmp378x/stmp378x_devb.c
+++ /dev/null
@@ -1,332 +0,0 @@
-/*
- * Freescale STMP378X development board support
- *
- * Embedded Alley Solutions, Inc <source@embeddedalley.com>
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/spi/spi.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/pins.h>
-#include <mach/pinmux.h>
-#include <mach/platform.h>
-#include <mach/stmp3xxx.h>
-#include <mach/mmc.h>
-#include <mach/gpmi.h>
-
-#include "stmp378x.h"
-
-static struct platform_device *devices[] = {
-	&stmp3xxx_dbguart,
-	&stmp3xxx_appuart,
-	&stmp3xxx_watchdog,
-	&stmp3xxx_touchscreen,
-	&stmp3xxx_rtc,
-	&stmp3xxx_keyboard,
-	&stmp3xxx_framebuffer,
-	&stmp3xxx_backlight,
-	&stmp3xxx_rotdec,
-	&stmp3xxx_persistent,
-	&stmp3xxx_dcp_bootstream,
-	&stmp3xxx_dcp,
-	&stmp3xxx_battery,
-	&stmp378x_pxp,
-	&stmp378x_i2c,
-};
-
-static struct pin_desc i2c_pins_desc[] = {
-	{ PINID_I2C_SCL, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
-	{ PINID_I2C_SDA, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
-};
-
-static struct pin_group i2c_pins = {
-	.pins		= i2c_pins_desc,
-	.nr_pins	= ARRAY_SIZE(i2c_pins_desc),
-};
-
-static struct pin_desc dbguart_pins_0[] = {
-	{ PINID_PWM0, PIN_FUN3, },
-	{ PINID_PWM1, PIN_FUN3, },
-};
-
-static struct pin_group dbguart_pins[] = {
-	[0] = {
-		.pins		= dbguart_pins_0,
-		.nr_pins	= ARRAY_SIZE(dbguart_pins_0),
-	},
-};
-
-static int dbguart_pins_control(int id, int request)
-{
-	int r = 0;
-
-	if (request)
-		r = stmp3xxx_request_pin_group(&dbguart_pins[id], "debug uart");
-	else
-		stmp3xxx_release_pin_group(&dbguart_pins[id], "debug uart");
-	return r;
-}
-
-static struct pin_desc appuart_pins_0[] = {
-	{ PINID_AUART1_CTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
-	{ PINID_AUART1_RTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
-	{ PINID_AUART1_RX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
-	{ PINID_AUART1_TX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
-};
-
-static struct pin_desc appuart_pins_1[] = {
-#if 0 /* enable these when second appuart will be connected */
-	{ PINID_AUART2_CTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
-	{ PINID_AUART2_RTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
-	{ PINID_AUART2_RX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
-	{ PINID_AUART2_TX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
-#endif
-};
-
-static struct pin_desc mmc_pins_desc[] = {
-	{ PINID_SSP1_DATA0, PIN_FUN1, PIN_8MA, PIN_3_3V, 1 },
-	{ PINID_SSP1_DATA1, PIN_FUN1, PIN_8MA, PIN_3_3V, 1 },
-	{ PINID_SSP1_DATA2, PIN_FUN1, PIN_8MA, PIN_3_3V, 1 },
-	{ PINID_SSP1_DATA3, PIN_FUN1, PIN_8MA, PIN_3_3V, 1 },
-	{ PINID_SSP1_CMD, PIN_FUN1, PIN_8MA, PIN_3_3V, 1 },
-	{ PINID_SSP1_SCK, PIN_FUN1, PIN_8MA, PIN_3_3V, 0 },
-	{ PINID_SSP1_DETECT, PIN_FUN1, PIN_8MA, PIN_3_3V, 0 },
-};
-
-static struct pin_group mmc_pins = {
-	.pins		= mmc_pins_desc,
-	.nr_pins	= ARRAY_SIZE(mmc_pins_desc),
-};
-
-static int stmp3xxxmmc_get_wp(void)
-{
-	return gpio_get_value(PINID_PWM4);
-}
-
-static int stmp3xxxmmc_hw_init_ssp1(void)
-{
-	int ret;
-
-	ret = stmp3xxx_request_pin_group(&mmc_pins, "mmc");
-	if (ret)
-		goto out;
-
-	/* Configure write protect GPIO pin */
-	ret = gpio_request(PINID_PWM4, "mmc wp");
-	if (ret)
-		goto out_wp;
-
-	gpio_direction_input(PINID_PWM4);
-
-	/* Configure POWER pin as gpio to drive power to MMC slot */
-	ret = gpio_request(PINID_PWM3, "mmc power");
-	if (ret)
-		goto out_power;
-
-	gpio_direction_output(PINID_PWM3, 0);
-	mdelay(100);
-
-	return 0;
-
-out_power:
-	gpio_free(PINID_PWM4);
-out_wp:
-	stmp3xxx_release_pin_group(&mmc_pins, "mmc");
-out:
-	return ret;
-}
-
-static void stmp3xxxmmc_hw_release_ssp1(void)
-{
-	gpio_free(PINID_PWM3);
-	gpio_free(PINID_PWM4);
-	stmp3xxx_release_pin_group(&mmc_pins, "mmc");
-}
-
-static void stmp3xxxmmc_cmd_pullup_ssp1(int enable)
-{
-	stmp3xxx_pin_pullup(PINID_SSP1_CMD, enable, "mmc");
-}
-
-static unsigned long
-stmp3xxxmmc_setclock_ssp1(void __iomem *base, unsigned long hz)
-{
-	struct clk *ssp, *parent;
-	char *p;
-	long r;
-
-	ssp = clk_get(NULL, "ssp");
-
-	/* using SSP1, no timeout, clock rate 1 */
-	writel(BF(2, SSP_TIMING_CLOCK_DIVIDE) |
-	       BF(0xFFFF, SSP_TIMING_TIMEOUT),
-	       base + HW_SSP_TIMING);
-
-	p = (hz > 1000000) ? "io" : "osc_24M";
-	parent = clk_get(NULL, p);
-	clk_set_parent(ssp, parent);
-	r = clk_set_rate(ssp, 2 * hz / 1000);
-	clk_put(parent);
-	clk_put(ssp);
-
-	return hz;
-}
-
-static struct stmp3xxxmmc_platform_data mmc_data = {
-	.hw_init	= stmp3xxxmmc_hw_init_ssp1,
-	.hw_release	= stmp3xxxmmc_hw_release_ssp1,
-	.get_wp		= stmp3xxxmmc_get_wp,
-	.cmd_pullup	= stmp3xxxmmc_cmd_pullup_ssp1,
-	.setclock	= stmp3xxxmmc_setclock_ssp1,
-};
-
-
-static struct pin_group appuart_pins[] = {
-	[0] = {
-		.pins		= appuart_pins_0,
-		.nr_pins	= ARRAY_SIZE(appuart_pins_0),
-	},
-	[1] = {
-		.pins		= appuart_pins_1,
-		.nr_pins	= ARRAY_SIZE(appuart_pins_1),
-	},
-};
-
-static struct pin_desc ssp1_pins_desc[] = {
-	{ PINID_SSP1_SCK,	PIN_FUN1, PIN_8MA, PIN_3_3V, 0, },
-	{ PINID_SSP1_CMD,	PIN_FUN1, PIN_4MA, PIN_3_3V, 0, },
-	{ PINID_SSP1_DATA0,	PIN_FUN1, PIN_4MA, PIN_3_3V, 0, },
-	{ PINID_SSP1_DATA3,	PIN_FUN1, PIN_4MA, PIN_3_3V, 0, },
-};
-
-static struct pin_desc ssp2_pins_desc[] = {
-	{ PINID_GPMI_WRN,	PIN_FUN3, PIN_8MA, PIN_3_3V, 0, },
-	{ PINID_GPMI_RDY1,	PIN_FUN3, PIN_4MA, PIN_3_3V, 0, },
-	{ PINID_GPMI_D00,	PIN_FUN3, PIN_4MA, PIN_3_3V, 0, },
-	{ PINID_GPMI_D03,	PIN_FUN3, PIN_4MA, PIN_3_3V, 0, },
-};
-
-static struct pin_group ssp1_pins = {
-	.pins = ssp1_pins_desc,
-	.nr_pins = ARRAY_SIZE(ssp1_pins_desc),
-};
-
-static struct pin_group ssp2_pins = {
-	.pins = ssp1_pins_desc,
-	.nr_pins = ARRAY_SIZE(ssp2_pins_desc),
-};
-
-static struct pin_desc gpmi_pins_desc[] = {
-	{ PINID_GPMI_CE0N, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
-	{ PINID_GPMI_CE1N, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
-	{ PINID_GMPI_CE2N, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
-	{ PINID_GPMI_CLE, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
-	{ PINID_GPMI_ALE, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
-	{ PINID_GPMI_WPN, PIN_FUN1, PIN_12MA, PIN_3_3V, 0 },
-	{ PINID_GPMI_RDY1, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
-	{ PINID_GPMI_D00, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
-	{ PINID_GPMI_D01, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
-	{ PINID_GPMI_D02, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
-	{ PINID_GPMI_D03, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
-	{ PINID_GPMI_D04, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
-	{ PINID_GPMI_D05, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
-	{ PINID_GPMI_D06, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
-	{ PINID_GPMI_D07, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
-	{ PINID_GPMI_RDY0, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
-	{ PINID_GPMI_RDY2, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
-	{ PINID_GPMI_RDY3, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
-	{ PINID_GPMI_WRN, PIN_FUN1, PIN_12MA, PIN_3_3V, 0 },
-	{ PINID_GPMI_RDN, PIN_FUN1, PIN_12MA, PIN_3_3V, 0 },
-};
-
-static struct pin_group gpmi_pins = {
-	.pins		= gpmi_pins_desc,
-	.nr_pins	= ARRAY_SIZE(gpmi_pins_desc),
-};
-
-static struct mtd_partition gpmi_partitions[] = {
-	[0] = {
-		.name	= "boot",
-		.size	= 10 * SZ_1M,
-		.offset	= 0,
-	},
-	[1] = {
-		.name	= "data",
-		.size	= MTDPART_SIZ_FULL,
-		.offset	= MTDPART_OFS_APPEND,
-	},
-};
-
-static struct gpmi_platform_data gpmi_data = {
-	.pins = &gpmi_pins,
-	.nr_parts = ARRAY_SIZE(gpmi_partitions),
-	.parts = gpmi_partitions,
-	.part_types = { "cmdline", NULL },
-};
-
-static struct spi_board_info spi_board_info[] __initdata = {
-#if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE)
-	{
-		.modalias       = "enc28j60",
-		.max_speed_hz   = 6 * 1000 * 1000,
-		.bus_num	= 1,
-		.chip_select    = 0,
-		.platform_data  = NULL,
-	},
-#endif
-};
-
-static void __init stmp378x_devb_init(void)
-{
-	stmp3xxx_pinmux_init(NR_REAL_IRQS);
-
-	/* init stmp3xxx platform */
-	stmp3xxx_init();
-
-	stmp3xxx_dbguart.dev.platform_data = dbguart_pins_control;
-	stmp3xxx_appuart.dev.platform_data = appuart_pins;
-	stmp3xxx_mmc.dev.platform_data = &mmc_data;
-	stmp3xxx_gpmi.dev.platform_data = &gpmi_data;
-	stmp3xxx_spi1.dev.platform_data = &ssp1_pins;
-	stmp3xxx_spi2.dev.platform_data = &ssp2_pins;
-	stmp378x_i2c.dev.platform_data = &i2c_pins;
-
-	/* register spi devices */
-	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
-
-	/* add board's devices */
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-
-	/* add devices selected by command line ssp1= and ssp2= options */
-	stmp3xxx_ssp1_device_register();
-	stmp3xxx_ssp2_device_register();
-}
-
-MACHINE_START(STMP378X, "STMP378X")
-	.boot_params	= 0x40000100,
-	.map_io		= stmp378x_map_io,
-	.init_irq	= stmp378x_init_irq,
-	.timer		= &stmp3xxx_timer,
-	.init_machine	= stmp378x_devb_init,
-MACHINE_END
diff --git a/arch/arm/plat-stmp3xxx/Kconfig b/arch/arm/plat-stmp3xxx/Kconfig
index dcdbe327fed..e6e312b6bdb 100644
--- a/arch/arm/plat-stmp3xxx/Kconfig
+++ b/arch/arm/plat-stmp3xxx/Kconfig
@@ -2,26 +2,6 @@ if ARCH_STMP3XXX
 
 menu "Freescale STMP3xxx implementations"
 
-choice
-	prompt "Select STMP3xxx chip family"
-
-config ARCH_STMP378X
-	bool "Freescale STMP378x"
-	select CPU_ARM926T
-	---help---
-	 STMP378x refers to 3780 through 3789 chips
-
-endchoice
-
-choice
-	prompt "Select STMP3xxx board type"
-
-config MACH_STMP378X
-	depends on ARCH_STMP378X
-	bool "Freescale STMP378x development board"
-
-endchoice
-
 endmenu
 
 endif