diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/devicetree/bindings/i2c/mux.txt | 60 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/i2c/samsung-i2c.txt | 8 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/i2c/xiic.txt | 22 | ||||
| -rw-r--r-- | Documentation/i2c/muxes/i2c-mux-gpio (renamed from Documentation/i2c/muxes/gpio-i2cmux) | 12 |
4 files changed, 94 insertions, 8 deletions
diff --git a/Documentation/devicetree/bindings/i2c/mux.txt b/Documentation/devicetree/bindings/i2c/mux.txt new file mode 100644 index 00000000000..af84cce5cd7 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/mux.txt @@ -0,0 +1,60 @@ +Common i2c bus multiplexer/switch properties. + +An i2c bus multiplexer/switch will have several child busses that are +numbered uniquely in a device dependent manner. The nodes for an i2c bus +multiplexer/switch will have one child node for each child +bus. + +Required properties: +- #address-cells = <1>; +- #size-cells = <0>; + +Required properties for child nodes: +- #address-cells = <1>; +- #size-cells = <0>; +- reg : The sub-bus number. + +Optional properties for child nodes: +- Other properties specific to the multiplexer/switch hardware. +- Child nodes conforming to i2c bus binding + + +Example : + + /* + An NXP pca9548 8 channel I2C multiplexer at address 0x70 + with two NXP pca8574 GPIO expanders attached, one each to + ports 3 and 4. + */ + + mux@70 { + compatible = "nxp,pca9548"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + gpio1: gpio@38 { + compatible = "nxp,pca8574"; + reg = <0x38>; + #gpio-cells = <2>; + gpio-controller; + }; + }; + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + + gpio2: gpio@38 { + compatible = "nxp,pca8574"; + reg = <0x38>; + #gpio-cells = <2>; + gpio-controller; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/i2c/samsung-i2c.txt b/Documentation/devicetree/bindings/i2c/samsung-i2c.txt index 38832c71291..b6cb5a12c67 100644 --- a/Documentation/devicetree/bindings/i2c/samsung-i2c.txt +++ b/Documentation/devicetree/bindings/i2c/samsung-i2c.txt @@ -6,14 +6,18 @@ Required properties: - compatible: value should be either of the following. (a) "samsung, s3c2410-i2c", for i2c compatible with s3c2410 i2c. (b) "samsung, s3c2440-i2c", for i2c compatible with s3c2440 i2c. + (c) "samsung, s3c2440-hdmiphy-i2c", for s3c2440-like i2c used + inside HDMIPHY block found on several samsung SoCs - reg: physical base address of the controller and length of memory mapped region. - interrupts: interrupt number to the cpu. - samsung,i2c-sda-delay: Delay (in ns) applied to data line (SDA) edges. - - gpios: The order of the gpios should be the following: <SDA, SCL>. - The gpio specifier depends on the gpio controller. Optional properties: + - gpios: The order of the gpios should be the following: <SDA, SCL>. + The gpio specifier depends on the gpio controller. Required in all + cases except for "samsung,s3c2440-hdmiphy-i2c" whose input/output + lines are permanently wired to the respective client - samsung,i2c-slave-addr: Slave address in multi-master enviroment. If not specified, default value is 0. - samsung,i2c-max-bus-freq: Desired frequency in Hz of the bus. If not diff --git a/Documentation/devicetree/bindings/i2c/xiic.txt b/Documentation/devicetree/bindings/i2c/xiic.txt new file mode 100644 index 00000000000..ceabbe91ae4 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/xiic.txt @@ -0,0 +1,22 @@ +Xilinx IIC controller: + +Required properties: +- compatible : Must be "xlnx,xps-iic-2.00.a" +- reg : IIC register location and length +- interrupts : IIC controller unterrupt +- #address-cells = <1> +- #size-cells = <0> + +Optional properties: +- Child nodes conforming to i2c bus binding + +Example: + + axi_iic_0: i2c@40800000 { + compatible = "xlnx,xps-iic-2.00.a"; + interrupts = < 1 2 >; + reg = < 0x40800000 0x10000 >; + + #size-cells = <0>; + #address-cells = <1>; + }; diff --git a/Documentation/i2c/muxes/gpio-i2cmux b/Documentation/i2c/muxes/i2c-mux-gpio index 811cd78d4cd..bd9b2299b73 100644 --- a/Documentation/i2c/muxes/gpio-i2cmux +++ b/Documentation/i2c/muxes/i2c-mux-gpio @@ -1,11 +1,11 @@ -Kernel driver gpio-i2cmux +Kernel driver i2c-gpio-mux Author: Peter Korsgaard <peter.korsgaard@barco.com> Description ----------- -gpio-i2cmux is an i2c mux driver providing access to I2C bus segments +i2c-gpio-mux is an i2c mux driver providing access to I2C bus segments from a master I2C bus and a hardware MUX controlled through GPIO pins. E.G.: @@ -26,16 +26,16 @@ according to the settings of the GPIO pins 1..N. Usage ----- -gpio-i2cmux uses the platform bus, so you need to provide a struct +i2c-gpio-mux uses the platform bus, so you need to provide a struct platform_device with the platform_data pointing to a struct gpio_i2cmux_platform_data with the I2C adapter number of the master bus, the number of bus segments to create and the GPIO pins used -to control it. See include/linux/gpio-i2cmux.h for details. +to control it. See include/linux/i2c-gpio-mux.h for details. E.G. something like this for a MUX providing 4 bus segments controlled through 3 GPIO pins: -#include <linux/gpio-i2cmux.h> +#include <linux/i2c-gpio-mux.h> #include <linux/platform_device.h> static const unsigned myboard_gpiomux_gpios[] = { @@ -57,7 +57,7 @@ static struct gpio_i2cmux_platform_data myboard_i2cmux_data = { }; static struct platform_device myboard_i2cmux = { - .name = "gpio-i2cmux", + .name = "i2c-gpio-mux", .id = 0, .dev = { .platform_data = &myboard_i2cmux_data, |