1 files changed, 0 insertions, 146 deletions
diff --git a/configs/nvram_mfg.txt b/configs/nvram_mfg.txt
deleted file mode 100644
index efb5cad..0000000
--- a/configs/nvram_mfg.txt
+++ /dev/null
@@ -1,146 +0,0 @@
-# Kona Rev0.1 2012.10.29-TSSI
-
-manfid=0x2d0
-prodid=0x05de
-vendid=0x14e4
-devid=0x4380
-boardtype=0x05de
-boardrev=0x1205
-boardnum=22
-macaddr=00:90:4c:c5:12:38
-sromrev=3
-#boardflags: 5GHz FEM: has ext 5GHz PA + LNA
-#            2.4GHz FEM: has ext 2.4GHz PA + SP3T
-#            2.4GHz FEM: SP3T switch share with BT
-#            keep original 0x200
-boardflags=0x10081a01
-xtalfreq=37400
-nocrc=1
-ag0=0
-aa2g=1
-ccode=ALL
-pa0itssit=0x20
-#PA parameters for 2.4GHz-10/29 R01 TSSI
-pa0b0=0x141E
-pa0b1=0xFD89
-pa0b2=0xFF57
-
-tssifloor2g=30
-extpagain2g=2
-extpagain5g=2
-
-# rssi params for 2.4GHz
-rssismf2g=0xf
-rssismc2g=0x8
-rssisav2g=0x1
-# rssi params(RFMD) for 2.4GHz
-#rssismf2g=0x3
-#rssismc2g=0xa
-#rssisav2g=0x1
-
-cckPwrOffset=3
-cckdigfilttype=24
-#PwrOffset40mhz2g=-10
-# rssi params for 5GHz
-rssismf5g=0xf
-rssismc5g=0x7
-rssisav5g=0x1
-#PA parameters for lower a-band-10/29 R01 TSSI
-pa1lob0=0x1A12
-pa1lob1=0xFCE0
-pa1lob2=0xFF53
-tssifloor5gl=30
-#PA parameters for midband-10/29 R01 TSSI
-pa1b0=0x1B2F
-pa1b1=0xFCBB
-pa1b2=0xFF4E
-tssifloor5gm=30
-#PA paramasdeters for high band-10/29 R01 TSSI
-pa1hib0=0x1BDC
-pa1hib1=0xFCA3
-pa1hib2=0xFF4B
-tssifloor5gh=30
-rxpo5g=0
-maxp2ga0=72
-# 2GTxPwr Backoff
-ofdm2gpo=0x66666666
-mcs2gpo0=0x8888
-mcs2gpo1=0x8888
-maxp5ga0=62
-maxp5gla0=58
-maxp5gha0=54
-# 5GTxPwr Backoff
-ofdm5gpo=0x33333333
-ofdm5glpo=0x33333333
-ofdm5ghpo=0x33333333
-mcs5gpo0=0x4444
-mcs5gpo1=0x4444
-mcs5glpo0=0x4444
-mcs5glpo1=0x4444
-mcs5ghpo0=0x4444
-mcs5ghpo1=0x4444
-# 5GTxPwr HT40 Backoff
-mcs5gpo2=0x6666
-mcs5gpo3=0x6666
-mcs5glpo2=0x6666
-mcs5glpo3=0x6666
-mcs5ghpo2=0x6666
-mcs5ghpo3=0x6666
-# 4334B1FCBGA -16, 4334B2FCBGA 4, 4334B2WLBGA -7
-PwrOffset40mhz5g=-1
-
-#ofdmdigfilttype=3
-ofdmdigfilttype2g=3
-ofdmdigfilttype5g=3
-#ofdm40digfilttype=5 -8/21-comment out
-
-il0macaddr=00:90:4c:c5:12:38
-wl0id=0x431b
-pagc2g=0x10
-
-# Parameters for DAC2x mode and ALPF bypass
-dacrate2xen=1
-txalpfbyp=1
-txalpfpu=1
-
-#Murata 2G & 5G FEM switch control table
-swctrlmap_2g=0x00400040,0x06060606,0x02020202,0x10302,0x1ff
-swctrlmap_5g=0x08080808,0x30303030,0x10101010,0x10302,0x2f8
-
-#elna_off_gain_idx_2g=32
-#elna_off_gain_idx_5g=TBD
-gain=32
-triso2g=8
-triso5g=7
-
-muxenab=0x10
-dacpu.fab.4=1
-
-aci_detect_en_2g=1
-
-#EPA_or_PAD_lpbck5g=1
-lpbckmode5g=1
-txiqlopapu5g=0
-iqcalidx5g=50
-txiqlopapu2g=0
-dlorange_lowlimit=5
-loflag=1
-
-###iqlocalidx5g=50
-###iqlocalidx5g=70 75 80
-iqlocalidx5g=45
-
-### dlocalidx5g should be greater than iqlocalidx5g by at least 20 index steps
-###dlocalidx5g=90
-dlocalidx5g=65
-
-#gain_settle_dly_2g=4
-gain_settle_dly_5g=4
-#noise_cal_po_2g=-1
-#noise_cal_po_40_2g=-1
-#noise_cal_high_gain_2g=73
-#noise_cal_nf_substract_val_2g=346
-noise_cal_po_5g=-1
-noise_cal_po_40_5g=-1
-noise_cal_high_gain_5g=73
-noise_cal_nf_substract_val_5g=346