added boot script files to repository

1 files changed, 0 insertions, 124 deletions

diff --git a/doc/README.at91 b/doc/README.at91
deleted file mode 100644
index 84b5595a9..000000000
--- a/doc/README.at91
+++ /dev/null
@@ -1,124 +0,0 @@
-Atmel AT91 Evaluation kits
-
-http://atmel.com/dyn/products/tools.asp?family_id=605#1443
-
-I. Board mapping & boot media
-------------------------------------------------------------------------------
-AT91SAM9260EK, AT91SAM9G20EK & AT91SAM9XEEK
-------------------------------------------------------------------------------
-
-Memory map
-	0x20000000 - 23FFFFFF	SDRAM (64 MB)
-	0xC0000000 - Cxxxxxxx	Atmel Dataflash card (J13)
-	0xD0000000 - Dxxxxxxx	Soldered Atmel Dataflash
-
-Environment variables
-
-	U-Boot environment variables can be stored at different places:
-		- Dataflash on SPI chip select 1 (default)
-		- Dataflash on SPI chip select 0 (dataflash card)
-		- Nand flash.
-
-	You can choose your storage location at config step (here for at91sam9260ek) :
-		make at91sam9260ek_config		- use data flash (spi cs1) (default)
-		make at91sam9260ek_nandflash_config	- use nand flash
-		make at91sam9260ek_dataflash_cs0_config	- use data flash (spi cs0)
-		make at91sam9260ek_dataflash_cs1_config	- use data flash (spi cs1)
-
-
-------------------------------------------------------------------------------
-AT91SAM9261EK, AT91SAM9G10EK
-------------------------------------------------------------------------------
-
-Memory map
-	0x20000000 - 23FFFFFF	SDRAM (64 MB)
-	0xC0000000 - Cxxxxxxx	Soldered Atmel Dataflash
-	0xD0000000 - Dxxxxxxx	Atmel Dataflash card (J22)
-
-Environment variables
-
-	U-Boot environment variables can be stored at different places:
-		- Dataflash on SPI chip select 0 (default)
-		- Dataflash on SPI chip select 3 (dataflash card)
-		- Nand flash.
-
-	You can choose your storage location at config step (here for at91sam9260ek) :
-		make at91sam9261ek_config		- use data flash (spi cs0) (default)
-		make at91sam9261ek_nandflash_config	- use nand flash
-		make at91sam9261ek_dataflash_cs0_config	- use data flash (spi cs0)
-		make at91sam9261ek_dataflash_cs3_config	- use data flash (spi cs3)
-
-
-------------------------------------------------------------------------------
-AT91SAM9263EK
-------------------------------------------------------------------------------
-
-Memory map
-	0x20000000 - 23FFFFFF	SDRAM (64 MB)
-	0xC0000000 - Cxxxxxxx	Atmel Dataflash card (J9)
-
-Environment variables
-
-	U-Boot environment variables can be stored at different places:
-		- Dataflash on SPI chip select 0 (dataflash card)
-		- Nand flash.
-		- Nor falsh (not populate by default)
-
-	You can choose your storage location at config step (here for at91sam9260ek) :
-		make at91sam9263ek_config		- use data flash (spi cs0) (default)
-		make at91sam9263ek_nandflash_config	- use nand flash
-		make at91sam9263ek_dataflash_cs0_config	- use data flash (spi cs0)
-		make at91sam9263ek_norflash_config	- use nor falsh
-
-	You can choose to boot directly from U-Boot at config step
-		make at91sam9263ek_norflash_boot_config	- boot from nor falsh
-
-
-------------------------------------------------------------------------------
-AT91SAM9M10G45EK
-------------------------------------------------------------------------------
-
-Memory map
-	0x20000000 - 23FFFFFF	SDRAM (64 MB)
-	0xC0000000 - Cxxxxxxx	Atmel Dataflash card (J12)
-
-Environment variables
-
-	U-Boot environment variables can be stored at different places:
-		- Dataflash on SPI chip select 0 (dataflash card)
-		- Nand flash.
-
-	You can choose your storage location at config step (here for at91sam9m10g45ek) :
-		make at91sam9m10g45ek_config			- use data flash (spi cs0) (default)
-		make at91sam9m10g45ek_nandflash_config		- use nand flash
-		make at91sam9m10g45ek_dataflash_cs0_config	- use data flash (spi cs0)
-
-
-------------------------------------------------------------------------------
-AT91SAM9RLEK
-------------------------------------------------------------------------------
-
-Memory map
-	0x20000000 - 23FFFFFF	SDRAM (64 MB)
-	0xC0000000 - Cxxxxxxx	Soldered Atmel Dataflash
-
-Environment variables
-
-	U-Boot environment variables can be stored at different places:
-		- Dataflash on SPI chip select 0
-		- Nand flash.
-
-	You can choose your storage location at config step (here for at91sam9260ek) :
-		make at91sam9263ek_config		- use data flash (spi cs0) (default)
-		make at91sam9263ek_nandflash_config	- use nand flash
-		make at91sam9263ek_dataflash_cs0_config	- use data flash (spi cs0)
-
-II. Watchdog support
-
-	For security reasons, the at91 watchdog is running at boot time and,
-	if deactivated, cannot be used anymore.
-	If you want to use the watchdog, you will need to keep it running in
-	your code (make sure not to disable it in AT91Bootstrap for instance).
-
-	In the U-Boot configuration, the AT91 watchdog support is enabled using
-	the CONFIG_AT91SAM9_WATCHDOG and CONFIG_HW_WATCHDOG options.