Move arch/ppc to arch/powerpc

As discussed on the list, move "arch/ppc" to "arch/powerpc" to
better match the Linux directory structure.

Please note that this patch also changes the "ppc" target in
MAKEALL to "powerpc" to match this new infrastructure. But "ppc"
is kept as an alias for now, to not break compatibility with
scripts using this name.

Signed-off-by: Stefan Roese <sr@denx.de>
Acked-by: Wolfgang Denk <wd@denx.de>
Acked-by: Detlev Zundel <dzu@denx.de>
Acked-by: Kim Phillips <kim.phillips@freescale.com>
Cc: Peter Tyser <ptyser@xes-inc.com>
Cc: Anatolij Gustschin <agust@denx.de>

1 files changed, 123 insertions, 0 deletions

diff --git a/arch/powerpc/cpu/mpc5xx/cpu_init.c b/arch/powerpc/cpu/mpc5xx/cpu_init.c
new file mode 100644
index 000000000..cb4bf8473
--- /dev/null
+++ b/arch/powerpc/cpu/mpc5xx/cpu_init.c
@@ -0,0 +1,123 @@
+/*
+ * (C) Copyright 2003  Martin Winistoerfer, martinwinistoerfer@gmx.ch.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation,
+ */
+
+/*
+ * File:		cpu_init.c
+ *
+ * Discription:		Contains initialisation functions to setup
+ *			the cpu properly
+ *
+ */
+
+#include <common.h>
+#include <mpc5xx.h>
+#include <watchdog.h>
+
+/*
+ * Setup essential cpu registers to run
+ */
+void cpu_init_f (volatile immap_t * immr)
+{
+	volatile memctl5xx_t *memctl = &immr->im_memctl;
+	ulong reg;
+
+	/* SYPCR - contains watchdog control. This will enable watchdog */
+	/* if CONFIG_WATCHDOG is set */
+	immr->im_siu_conf.sc_sypcr = CONFIG_SYS_SYPCR;
+
+#if defined(CONFIG_WATCHDOG)
+	reset_5xx_watchdog (immr);
+#endif
+
+	/* SIUMCR - contains debug pin configuration */
+	immr->im_siu_conf.sc_siumcr |= CONFIG_SYS_SIUMCR;
+
+	/* Initialize timebase. Unlock TBSCRK */
+	immr->im_sitk.sitk_tbscrk = KAPWR_KEY;
+	immr->im_sit.sit_tbscr = CONFIG_SYS_TBSCR;
+
+	/* Full IMB bus speed */
+	immr->im_uimb.uimb_umcr = CONFIG_SYS_UMCR;
+
+	/* Time base and decrementer will be enables (TBE) */
+	/* in init_timebase() in time.c called from board_init_f(). */
+
+	/* Initialize the PIT. Unlock PISCRK */
+	immr->im_sitk.sitk_piscrk = KAPWR_KEY;
+	immr->im_sit.sit_piscr = CONFIG_SYS_PISCR;
+
+#if !defined(CONFIG_PATI)
+	/* PATI sest PLL in start.S */
+	/* PLL (CPU clock) settings */
+	immr->im_clkrstk.cark_plprcrk = KAPWR_KEY;
+
+	/* If CONFIG_SYS_PLPRCR (set in the various *_config.h files) tries to
+	 * set the MF field, then just copy CONFIG_SYS_PLPRCR over car_plprcr,
+	 * otherwise OR in CONFIG_SYS_PLPRCR so we do not change the currentMF
+	 * field value.
+	 */
+#if ((CONFIG_SYS_PLPRCR & PLPRCR_MF_MSK) != 0)
+	reg = CONFIG_SYS_PLPRCR;			/* reset control bits   */
+#else
+	reg = immr->im_clkrst.car_plprcr;
+	reg &= PLPRCR_MF_MSK;			/* isolate MF field */
+	reg |= CONFIG_SYS_PLPRCR;			/* reset control bits   */
+#endif
+	immr->im_clkrst.car_plprcr = reg;
+
+#endif /* !defined(CONFIG_PATI) */
+
+	/* System integration timers. CONFIG_SYS_MASK has EBDF configuration */
+	immr->im_clkrstk.cark_sccrk = KAPWR_KEY;
+	reg = immr->im_clkrst.car_sccr;
+	reg &= SCCR_MASK;
+	reg |= CONFIG_SYS_SCCR;
+	immr->im_clkrst.car_sccr = reg;
+
+	/* Memory Controller */
+	memctl->memc_br0 = CONFIG_SYS_BR0_PRELIM;
+	memctl->memc_or0 = CONFIG_SYS_OR0_PRELIM;
+
+#if (defined(CONFIG_SYS_OR1_PRELIM) && defined(CONFIG_SYS_BR1_PRELIM))
+	memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
+	memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;
+#endif
+
+#if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM)
+	memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM;
+	memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM;
+#endif
+
+#if defined(CONFIG_SYS_OR3_PRELIM) && defined(CONFIG_SYS_BR3_PRELIM)
+	memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM;
+	memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM;
+#endif
+
+}
+
+/*
+ * Initialize higher level parts of cpu
+ */
+int cpu_init_r (void)
+{
+	/* Nothing to do at the moment */
+	return (0);
+}