Patch by Kyle Harris, 20 May 2003:

In preparation for an ixp port, rename cpu/xscale and arch-xscale
into cpu/pxa and arch-pxa.

7 files changed, 1528 insertions, 0 deletions

diff --git a/cpu/pxa/Makefile b/cpu/pxa/Makefile
new file mode 100644
index 000000000..778a6646f
--- /dev/null
+++ b/cpu/pxa/Makefile
@@ -0,0 +1,43 @@
+#
+# (C) Copyright 2000, 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(CPU).a
+
+START	= start.o
+OBJS	= serial.o interrupts.o cpu.o i2c.o
+
+all:	.depend $(START) $(LIB)
+
+$(LIB):	$(OBJS)
+	$(AR) crv $@ $(OBJS)
+
+#########################################################################
+
+.depend:	Makefile $(START:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/cpu/pxa/config.mk b/cpu/pxa/config.mk
new file mode 100644
index 000000000..c40dcf861
--- /dev/null
+++ b/cpu/pxa/config.mk
@@ -0,0 +1,28 @@
+#
+# (C) Copyright 2002
+# Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+# Marius Groeger <mgroeger@sysgo.de>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+PLATFORM_RELFLAGS += -fno-strict-aliasing  -fno-common -ffixed-r8 \
+	-mshort-load-bytes -msoft-float
+
+PLATFORM_CPPFLAGS += -mapcs-32 -march=armv4 -mtune=strongarm1100
diff --git a/cpu/pxa/cpu.c b/cpu/pxa/cpu.c
new file mode 100644
index 000000000..6a3c24ded
--- /dev/null
+++ b/cpu/pxa/cpu.c
@@ -0,0 +1,152 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <azu@sysgo.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * CPU specific code
+ */
+
+#include <common.h>
+#include <command.h>
+
+int cpu_init (void)
+{
+	/*
+	 * setup up stack if necessary
+	 */
+/*
+
+  FIXME: the stack is _below_ the uboot code!!
+
+#ifdef CONFIG_USE_IRQ
+	IRQ_STACK_START = _armboot_end +
+			CONFIG_STACKSIZE + CONFIG_STACKSIZE_IRQ - 4;
+	FIQ_STACK_START = IRQ_STACK_START + CONFIG_STACKSIZE_FIQ;
+	_armboot_real_end = FIQ_STACK_START + 4;
+#else
+	_armboot_real_end = _armboot_end + CONFIG_STACKSIZE;
+#endif
+*/
+	return (0);
+}
+
+int cleanup_before_linux (void)
+{
+	/*
+	 * this function is called just before we call linux
+	 * it prepares the processor for linux
+	 *
+	 * just disable everything that can disturb booting linux
+	 */
+
+	unsigned long i;
+
+	disable_interrupts ();
+
+	/* turn off I-cache */
+	asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i));
+	i &= ~0x1000;
+	asm ("mcr p15, 0, %0, c1, c0, 0": :"r" (i));
+
+	/* flush I-cache */
+	asm ("mcr p15, 0, %0, c7, c5, 0": :"r" (i));
+
+	return (0);
+}
+
+int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	extern void reset_cpu (ulong addr);
+
+	printf ("reseting ...\n");
+
+	udelay (50000);				/* wait 50 ms */
+	disable_interrupts ();
+	reset_cpu (0);
+
+	/*NOTREACHED*/
+	return (0);
+}
+
+/* taken from blob */
+void icache_enable (void)
+{
+	register u32 i;
+
+	/* read control register */
+	asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i));
+
+	/* set i-cache */
+	i |= 0x1000;
+
+	/* write back to control register */
+	asm ("mcr p15, 0, %0, c1, c0, 0": :"r" (i));
+}
+
+void icache_disable (void)
+{
+	register u32 i;
+
+	/* read control register */
+	asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i));
+
+	/* clear i-cache */
+	i &= ~0x1000;
+
+	/* write back to control register */
+	asm ("mcr p15, 0, %0, c1, c0, 0": :"r" (i));
+
+	/* flush i-cache */
+	asm ("mcr p15, 0, %0, c7, c5, 0": :"r" (i));
+}
+
+int icache_status (void)
+{
+	register u32 i;
+
+	/* read control register */
+	asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i));
+
+	/* return bit */
+	return (i & 0x1000);
+}
+
+/* we will never enable dcache, because we have to setup MMU first */
+void dcache_enable (void)
+{
+	return;
+}
+
+void dcache_disable (void)
+{
+	return;
+}
+
+int dcache_status (void)
+{
+	return 0;					/* always off */
+}
diff --git a/cpu/pxa/i2c.c b/cpu/pxa/i2c.c
new file mode 100644
index 000000000..406f825cd
--- /dev/null
+++ b/cpu/pxa/i2c.c
@@ -0,0 +1,460 @@
+/*
+ * (C) Copyright 2000
+ * Paolo Scaffardi, AIRVENT SAM s.p.a - RIMINI(ITALY), arsenio@tin.it
+ *
+ * (C) Copyright 2000 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2003 Pengutronix e.K.
+ * Robert Schwebel <r.schwebel@pengutronix.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Back ported to the 8xx platform (from the 8260 platform) by
+ * Murray.Jensen@cmst.csiro.au, 27-Jan-01.
+ */
+
+/* FIXME: this file is PXA255 specific! What about other XScales? */
+
+#include <common.h>
+
+#ifdef CONFIG_HARD_I2C
+
+/* 
+ *	- CFG_I2C_SPEED 
+ *	- I2C_PXA_SLAVE_ADDR 
+ */
+
+#include <asm/arch/hardware.h>
+#include <asm/arch/pxa-regs.h>
+#include <i2c.h>
+
+//#define	DEBUG_I2C 	1	/* activate local debugging output  */
+#define I2C_PXA_SLAVE_ADDR	0x1	/* slave pxa unit address           */
+#define I2C_ICR_INIT		(ICR_BEIE | ICR_IRFIE | ICR_ITEIE | ICR_GCD | ICR_SCLE)
+#define I2C_ISR_INIT		0x7FF
+
+#ifdef DEBUG_I2C
+#define PRINTD(x) printf x
+#else
+#define PRINTD(x)
+#endif
+
+
+/* Shall the current transfer have a start/stop condition? */
+#define I2C_COND_NORMAL		0
+#define I2C_COND_START		1
+#define I2C_COND_STOP		2
+
+/* Shall the current transfer be ack/nacked or being waited for it? */
+#define I2C_ACKNAK_WAITACK	1	
+#define I2C_ACKNAK_SENDACK	2
+#define I2C_ACKNAK_SENDNAK	4
+
+/* Specify who shall transfer the data (master or slave) */
+#define I2C_READ		0
+#define I2C_WRITE		1
+
+/* All transfers are described by this data structure */
+struct i2c_msg {
+	u8 condition;
+	u8 acknack; 
+	u8 direction; 
+	u8 data;
+};
+
+
+/**
+ * i2c_pxa_reset: - reset the host controller 
+ *
+ */
+
+static void i2c_reset( void )
+{
+	ICR &= ~ICR_IUE;		/* disable unit */
+        ICR |= ICR_UR;			/* reset the unit */
+        udelay(100);
+        ICR &= ~ICR_IUE;		/* disable unit */
+        CKEN |= CKEN14_I2C;		/* set the global I2C clock on */
+        ISAR = I2C_PXA_SLAVE_ADDR;	/* set our slave address */
+        ICR = I2C_ICR_INIT;		/* set control register values */
+        ISR = I2C_ISR_INIT;		/* set clear interrupt bits */
+        ICR |= ICR_IUE;			/* enable unit */
+        udelay(100);
+}
+
+
+/**
+ * i2c_isr_set_cleared: - wait until certain bits of the I2C status register 
+ *	                  are set and cleared
+ *
+ * @return: 0 in case of success, 1 means timeout (no match within 10 ms). 
+ */
+
+static int i2c_isr_set_cleared( unsigned long set_mask, unsigned long cleared_mask )
+{
+	int timeout = 10000;
+
+	while( ((ISR & set_mask)!=set_mask) || ((ISR & cleared_mask)!=0) ){
+		udelay( 10 );
+		if( timeout-- < 0 ) return 0;
+	}
+
+        return 1;
+}
+
+
+/**
+ * i2c_transfer: - Transfer one byte over the i2c bus
+ *
+ * This function can tranfer a byte over the i2c bus in both directions. 
+ * It is used by the public API functions. 
+ *
+ * @return:  0: transfer successful
+ *          -1: message is empty
+ *          -2: transmit timeout
+ *          -3: ACK missing
+ *          -4: receive timeout
+ *          -5: illegal parameters
+ *          -6: bus is busy and couldn't be aquired
+ */ 
+int i2c_transfer(struct i2c_msg *msg)
+{
+	int ret;
+
+	if (!msg) 
+		goto transfer_error_msg_empty;
+
+	switch(msg->direction) {
+
+	case I2C_WRITE:
+
+		/* check if bus is not busy */
+		if (!i2c_isr_set_cleared(0,ISR_IBB))
+			goto transfer_error_bus_busy;
+
+		/* start transmission */
+		ICR &= ~ICR_START;
+		ICR &= ~ICR_STOP;
+		IDBR = msg->data;
+		if (msg->condition == I2C_COND_START)     ICR |=  ICR_START;
+		if (msg->condition == I2C_COND_STOP)      ICR |=  ICR_STOP; 
+		if (msg->acknack   == I2C_ACKNAK_SENDNAK) ICR |=  ICR_ACKNAK;
+		if (msg->acknack   == I2C_ACKNAK_SENDACK) ICR &= ~ICR_ACKNAK;
+		ICR &= ~ICR_ALDIE;
+		ICR |= ICR_TB; 
+
+		/* transmit register empty? */
+		if (!i2c_isr_set_cleared(ISR_ITE,0)) 
+			goto transfer_error_transmit_timeout;
+
+		/* clear 'transmit empty' state */
+		ISR |= ISR_ITE;
+
+		/* wait for ACK from slave */
+		if (msg->acknack == I2C_ACKNAK_WAITACK)
+			if (!i2c_isr_set_cleared(0,ISR_ACKNAK)) 
+				goto transfer_error_ack_missing;
+		break;
+
+	case I2C_READ:
+
+		/* check if bus is not busy */
+		if (!i2c_isr_set_cleared(0,ISR_IBB))
+			goto transfer_error_bus_busy;
+
+		/* start receive */
+		ICR &= ~ICR_START;
+		ICR &= ~ICR_STOP;
+		if (msg->condition == I2C_COND_START) 	  ICR |= ICR_START;
+		if (msg->condition == I2C_COND_STOP)  	  ICR |= ICR_STOP;
+		if (msg->acknack   == I2C_ACKNAK_SENDNAK) ICR |=  ICR_ACKNAK;
+		if (msg->acknack   == I2C_ACKNAK_SENDACK) ICR &= ~ICR_ACKNAK;
+		ICR &= ~ICR_ALDIE;
+		ICR |= ICR_TB;
+
+		/* receive register full? */
+		if (!i2c_isr_set_cleared(ISR_IRF,0)) 
+			goto transfer_error_receive_timeout; 
+
+		msg->data = IDBR;
+
+		/* clear 'receive empty' state */
+		ISR |= ISR_IRF;
+
+		break;
+
+	default:
+
+		goto transfer_error_illegal_param;
+
+	}
+
+	return 0; 
+
+transfer_error_msg_empty: 
+		PRINTD(("i2c_transfer: error: 'msg' is empty\n"));
+		ret = -1; goto i2c_transfer_finish;
+
+transfer_error_transmit_timeout:
+		PRINTD(("i2c_transfer: error: transmit timeout\n"));
+		ret = -2; goto i2c_transfer_finish;
+
+transfer_error_ack_missing:
+		PRINTD(("i2c_transfer: error: ACK missing\n"));
+		ret = -3; goto i2c_transfer_finish;
+
+transfer_error_receive_timeout:
+		PRINTD(("i2c_transfer: error: receive timeout\n"));
+		ret = -4; goto i2c_transfer_finish;
+
+transfer_error_illegal_param:
+		PRINTD(("i2c_transfer: error: illegal parameters\n"));
+		ret = -5; goto i2c_transfer_finish;
+
+transfer_error_bus_busy:
+		PRINTD(("i2c_transfer: error: bus is busy\n"));
+		ret = -6; goto i2c_transfer_finish;
+
+i2c_transfer_finish:
+		PRINTD(("i2c_transfer: ISR: 0x%04x\n",ISR));
+		i2c_reset();
+		return ret;
+
+}
+
+/* ------------------------------------------------------------------------ */
+/* API Functions                                                            */
+/* ------------------------------------------------------------------------ */
+
+void i2c_init(int speed, int slaveaddr)
+{
+#ifdef CFG_I2C_INIT_BOARD        
+	/* call board specific i2c bus reset routine before accessing the   */
+	/* environment, which might be in a chip on that bus. For details   */
+	/* about this problem see doc/I2C_Edge_Conditions.                  */
+	i2c_init_board();
+#endif
+}
+
+
+/**
+ * i2c_probe: - Test if a chip answers for a given i2c address
+ *
+ * @chip:	address of the chip which is searched for 
+ * @return: 	0 if a chip was found, -1 otherwhise
+ */
+
+int i2c_probe(uchar chip)
+{
+	struct i2c_msg msg;
+
+	i2c_reset();
+
+	msg.condition = I2C_COND_START;
+	msg.acknack   = I2C_ACKNAK_WAITACK;
+	msg.direction = I2C_WRITE;
+	msg.data      = (chip << 1) + 1;
+	if (i2c_transfer(&msg)) return -1;
+
+	msg.condition = I2C_COND_STOP;
+	msg.acknack   = I2C_ACKNAK_SENDNAK;
+	msg.direction = I2C_READ;
+	msg.data      = 0x00;
+	if (i2c_transfer(&msg)) return -1;
+
+	return 0;
+}
+
+
+/**
+ * i2c_read: - Read multiple bytes from an i2c device
+ *
+ * The higher level routines take into account that this function is only
+ * called with len < page length of the device (see configuration file) 
+ *
+ * @chip:	address of the chip which is to be read
+ * @addr:	i2c data address within the chip
+ * @alen:	length of the i2c data address (1..2 bytes)
+ * @buffer:	where to write the data
+ * @len:	how much byte do we want to read
+ * @return:	0 in case of success
+ */
+
+int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
+{
+	struct i2c_msg msg;
+	u8 addr_bytes[3]; /* lowest...highest byte of data address */
+	int ret;
+
+	PRINTD(("i2c_read(chip=0x%02x, addr=0x%02x, alen=0x%02x, len=0x%02x)\n",chip,addr,alen,len));
+
+	i2c_reset();
+
+	/* dummy chip address write */
+	PRINTD(("i2c_read: dummy chip address write\n"));
+	msg.condition = I2C_COND_START;
+	msg.acknack   = I2C_ACKNAK_WAITACK;
+	msg.direction = I2C_WRITE;
+	msg.data      = (chip << 1);
+	msg.data     &= 0xFE;
+	if ((ret=i2c_transfer(&msg))) return -1;
+	
+	/*
+	 * send memory address bytes; 
+	 * alen defines how much bytes we have to send. 
+	 */
+	//addr &= ((1 << CFG_EEPROM_PAGE_WRITE_BITS)-1);
+	addr_bytes[0] = (u8)((addr >>  0) & 0x000000FF);
+	addr_bytes[1] = (u8)((addr >>  8) & 0x000000FF);
+	addr_bytes[2] = (u8)((addr >> 16) & 0x000000FF);
+
+	while (--alen >= 0) {
+
+		PRINTD(("i2c_read: send memory word address byte %1d\n",alen));
+		msg.condition = I2C_COND_NORMAL;
+		msg.acknack   = I2C_ACKNAK_WAITACK;
+		msg.direction = I2C_WRITE;
+		msg.data      = addr_bytes[alen];
+		if ((ret=i2c_transfer(&msg))) return -1;
+	}
+	
+
+	/* start read sequence */
+	PRINTD(("i2c_read: start read sequence\n"));
+	msg.condition = I2C_COND_START;
+	msg.acknack   = I2C_ACKNAK_WAITACK;
+	msg.direction = I2C_WRITE;
+	msg.data      = (chip << 1);
+	msg.data     |= 0x01;
+	if ((ret=i2c_transfer(&msg))) return -1;
+
+	/* read bytes; send NACK at last byte */
+	while (len--) {
+
+		if (len==0) { 
+			msg.condition = I2C_COND_STOP;
+			msg.acknack   = I2C_ACKNAK_SENDNAK;
+		} else {
+			msg.condition = I2C_COND_NORMAL;
+			msg.acknack   = I2C_ACKNAK_SENDACK;
+		}
+
+		msg.direction = I2C_READ;
+		msg.data      = 0x00;
+		if ((ret=i2c_transfer(&msg))) return -1;
+
+		*(buffer++) = msg.data;
+
+		PRINTD(("i2c_read: reading byte (0x%08x)=0x%02x\n",(unsigned int)buffer,*buffer));
+
+	}
+
+	i2c_reset();
+
+	return 0;
+}
+
+
+/**
+ * i2c_write: -  Write multiple bytes to an i2c device
+ *
+ * The higher level routines take into account that this function is only
+ * called with len < page length of the device (see configuration file) 
+ *
+ * @chip:	address of the chip which is to be written
+ * @addr:	i2c data address within the chip
+ * @alen:	length of the i2c data address (1..2 bytes)
+ * @buffer:	where to find the data to be written 
+ * @len:	how much byte do we want to read
+ * @return:	0 in case of success
+ */
+
+int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
+{
+	struct i2c_msg msg;
+	u8 addr_bytes[3]; /* lowest...highest byte of data address */
+
+	PRINTD(("i2c_write(chip=0x%02x, addr=0x%02x, alen=0x%02x, len=0x%02x)\n",chip,addr,alen,len));
+
+	i2c_reset();
+
+	/* chip address write */
+	PRINTD(("i2c_write: chip address write\n"));
+	msg.condition = I2C_COND_START;
+	msg.acknack   = I2C_ACKNAK_WAITACK;
+	msg.direction = I2C_WRITE;
+	msg.data      = (chip << 1);
+	msg.data     &= 0xFE;
+	if (i2c_transfer(&msg)) return -1;
+	
+	/*
+	 * send memory address bytes; 
+	 * alen defines how much bytes we have to send. 
+	 */
+	addr_bytes[0] = (u8)((addr >>  0) & 0x000000FF);
+	addr_bytes[1] = (u8)((addr >>  8) & 0x000000FF);
+	addr_bytes[2] = (u8)((addr >> 16) & 0x000000FF);
+
+	while (--alen >= 0) {
+
+		PRINTD(("i2c_write: send memory word address\n"));
+		msg.condition = I2C_COND_NORMAL;
+		msg.acknack   = I2C_ACKNAK_WAITACK;
+		msg.direction = I2C_WRITE;
+		msg.data      = addr_bytes[alen];
+		if (i2c_transfer(&msg)) return -1;
+	}
+		
+	/* write bytes; send NACK at last byte */
+	while (len--) {
+
+		PRINTD(("i2c_write: writing byte (0x%08x)=0x%02x\n",(unsigned int)buffer,*buffer));
+
+		if (len==0) 
+			msg.condition = I2C_COND_STOP;
+		else
+			msg.condition = I2C_COND_NORMAL;
+
+		msg.acknack   = I2C_ACKNAK_WAITACK;
+		msg.direction = I2C_WRITE;
+		msg.data      = *(buffer++);
+		
+		if (i2c_transfer(&msg)) return -1;
+
+	}
+
+	i2c_reset();
+
+	return 0;
+
+}
+
+uchar i2c_reg_read (uchar chip, uchar reg)
+{
+	PRINTD(("i2c_reg_read(chip=0x%02x, reg=0x%02x)\n",chip,reg));
+	return 0;
+}
+
+void  i2c_reg_write(uchar chip, uchar reg, uchar val)
+{
+	PRINTD(("i2c_reg_write(chip=0x%02x, reg=0x%02x, val=0x%02x)\n",chip,reg,val));
+}
+
+#endif	/* CONFIG_HARD_I2C */
diff --git a/cpu/pxa/interrupts.c b/cpu/pxa/interrupts.c
new file mode 100644
index 000000000..af7d63414
--- /dev/null
+++ b/cpu/pxa/interrupts.c
@@ -0,0 +1,205 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <azu@sysgo.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/pxa-regs.h>
+
+extern void reset_cpu (ulong addr);
+
+#ifdef CONFIG_USE_IRQ
+/* enable IRQ/FIQ interrupts */
+void enable_interrupts (void)
+{
+#error: interrupts not implemented yet
+}
+
+
+/*
+ * disable IRQ/FIQ interrupts
+ * returns true if interrupts had been enabled before we disabled them
+ */
+int disable_interrupts (void)
+{
+#error: interrupts not implemented yet
+}
+#else
+void enable_interrupts (void)
+{
+	return;
+}
+int disable_interrupts (void)
+{
+	return 0;
+}
+#endif
+
+
+
+void bad_mode (void)
+{
+	panic ("Resetting CPU ...\n");
+	reset_cpu (0);
+}
+
+void show_regs (struct pt_regs *regs)
+{
+	unsigned long flags;
+	const char *processor_modes[] = {
+	"USER_26",	"FIQ_26",	"IRQ_26",	"SVC_26",
+	"UK4_26",	"UK5_26",	"UK6_26",	"UK7_26",
+	"UK8_26",	"UK9_26",	"UK10_26",	"UK11_26",
+	"UK12_26",	"UK13_26",	"UK14_26",	"UK15_26",
+	"USER_32",	"FIQ_32",	"IRQ_32",	"SVC_32",
+	"UK4_32",	"UK5_32",	"UK6_32",	"ABT_32",
+	"UK8_32",	"UK9_32",	"UK10_32",	"UND_32",
+	"UK12_32",	"UK13_32",	"UK14_32",	"SYS_32"
+	};
+
+	flags = condition_codes (regs);
+
+	printf ("pc : [<%08lx>]    lr : [<%08lx>]\n"
+		"sp : %08lx  ip : %08lx  fp : %08lx\n",
+		instruction_pointer (regs),
+		regs->ARM_lr, regs->ARM_sp, regs->ARM_ip, regs->ARM_fp);
+	printf ("r10: %08lx  r9 : %08lx  r8 : %08lx\n",
+		regs->ARM_r10, regs->ARM_r9, regs->ARM_r8);
+	printf ("r7 : %08lx  r6 : %08lx  r5 : %08lx  r4 : %08lx\n",
+		regs->ARM_r7, regs->ARM_r6, regs->ARM_r5, regs->ARM_r4);
+	printf ("r3 : %08lx  r2 : %08lx  r1 : %08lx  r0 : %08lx\n",
+		regs->ARM_r3, regs->ARM_r2, regs->ARM_r1, regs->ARM_r0);
+	printf ("Flags: %c%c%c%c",
+		flags & CC_N_BIT ? 'N' : 'n',
+		flags & CC_Z_BIT ? 'Z' : 'z',
+		flags & CC_C_BIT ? 'C' : 'c', flags & CC_V_BIT ? 'V' : 'v');
+	printf ("  IRQs %s  FIQs %s  Mode %s%s\n",
+		interrupts_enabled (regs) ? "on" : "off",
+		fast_interrupts_enabled (regs) ? "on" : "off",
+		processor_modes[processor_mode (regs)],
+		thumb_mode (regs) ? " (T)" : "");
+}
+
+void do_undefined_instruction (struct pt_regs *pt_regs)
+{
+	printf ("undefined instruction\n");
+	show_regs (pt_regs);
+	bad_mode ();
+}
+
+void do_software_interrupt (struct pt_regs *pt_regs)
+{
+	printf ("software interrupt\n");
+	show_regs (pt_regs);
+	bad_mode ();
+}
+
+void do_prefetch_abort (struct pt_regs *pt_regs)
+{
+	printf ("prefetch abort\n");
+	show_regs (pt_regs);
+	bad_mode ();
+}
+
+void do_data_abort (struct pt_regs *pt_regs)
+{
+	printf ("data abort\n");
+	show_regs (pt_regs);
+	bad_mode ();
+}
+
+void do_not_used (struct pt_regs *pt_regs)
+{
+	printf ("not used\n");
+	show_regs (pt_regs);
+	bad_mode ();
+}
+
+void do_fiq (struct pt_regs *pt_regs)
+{
+	printf ("fast interrupt request\n");
+	show_regs (pt_regs);
+	bad_mode ();
+}
+
+void do_irq (struct pt_regs *pt_regs)
+{
+	printf ("interrupt request\n");
+	show_regs (pt_regs);
+	bad_mode ();
+}
+
+
+int interrupt_init (void)
+{
+	/* nothing happens here - we don't setup any IRQs */
+	return (0);
+}
+
+void reset_timer (void)
+{
+	reset_timer_masked ();
+}
+
+ulong get_timer (ulong base)
+{
+	return get_timer_masked ();
+}
+
+void set_timer (ulong t)
+{
+	/* nop */
+}
+
+void udelay (unsigned long usec)
+{
+	udelay_masked (usec);
+}
+
+
+void reset_timer_masked (void)
+{
+	OSCR = 0;
+}
+
+ulong get_timer_masked (void)
+{
+	return OSCR;
+}
+
+void udelay_masked (unsigned long usec)
+{
+	ulong tmo;
+
+	tmo = usec / 1000;
+	tmo *= CFG_HZ;
+	tmo /= 1000;
+
+	reset_timer_masked ();
+
+	while (tmo >= get_timer_masked ())
+		/*NOP*/;
+}
diff --git a/cpu/pxa/serial.c b/cpu/pxa/serial.c
new file mode 100644
index 000000000..c9d5f70bc
--- /dev/null
+++ b/cpu/pxa/serial.c
@@ -0,0 +1,166 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <azu@sysgo.de>
+ *
+ * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <common.h>
+#include <asm/arch/pxa-regs.h>
+
+void serial_setbrg (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	unsigned int quot = 0;
+
+	if (gd->baudrate == 1200)
+		quot = 192;
+	else if (gd->baudrate == 9600)
+		quot = 96;
+	else if (gd->baudrate == 19200)
+		quot = 48;
+	else if (gd->baudrate == 38400)
+		quot = 24;
+	else if (gd->baudrate == 57600)
+		quot = 16;
+	else if (gd->baudrate == 115200)
+		quot = 8;
+	else
+		hang ();
+
+#ifdef CONFIG_FFUART
+
+	CKEN |= CKEN6_FFUART;
+
+	FFIER = 0;					/* Disable for now */
+	FFFCR = 0;					/* No fifos enabled */
+
+	/* set baud rate */
+	FFLCR = LCR_WLS0 | LCR_WLS1 | LCR_DLAB;
+	FFDLL = quot & 0xff;
+	FFDLH = quot >> 8;
+	FFLCR = LCR_WLS0 | LCR_WLS1;
+
+	FFIER = IER_UUE;			/* Enable FFUART */
+
+#elif defined(CONFIG_BTUART)
+	CKEN |= CKEN7_BTUART;
+
+	BTIER = 0;
+	BTFCR = 0;
+
+	/* set baud rate */
+	BTLCR = LCR_DLAB;
+	BTDLL = quot & 0xff;
+	BTDLH = quot >> 8;
+	BTLCR = LCR_WLS0 | LCR_WLS1;
+
+	BTIER = IER_UUE;			/* Enable BFUART */
+
+#elif defined(CONFIG_STUART)
+#error "Bad: not implemented yet!"
+#else
+#error "Bad: you didn't configured serial ..."
+#endif
+}
+
+
+/*
+ * Initialise the serial port with the given baudrate. The settings
+ * are always 8 data bits, no parity, 1 stop bit, no start bits.
+ *
+ */
+int serial_init (void)
+{
+	serial_setbrg ();
+
+	return (0);
+}
+
+
+/*
+ * Output a single byte to the serial port.
+ */
+void serial_putc (const char c)
+{
+#ifdef CONFIG_FFUART
+	/* wait for room in the tx FIFO on FFUART */
+	while ((FFLSR & LSR_TEMT) == 0);
+
+	FFTHR = c;
+#elif defined(CONFIG_BTUART)
+	while ((BTLSR & LSR_TEMT ) == 0 );
+	BTTHR = c;
+#elif defined(CONFIG_STUART)
+#endif
+
+	/* If \n, also do \r */
+	if (c == '\n')
+		serial_putc ('\r');
+}
+
+/*
+ * Read a single byte from the serial port. Returns 1 on success, 0
+ * otherwise. When the function is succesfull, the character read is
+ * written into its argument c.
+ */
+int serial_tstc (void)
+{
+#ifdef CONFIG_FFUART
+	return FFLSR & LSR_DR;
+#elif defined(CONFIG_BTUART)
+	return BTLSR & LSR_DR;
+#elif defined(CONFIG_STUART)
+#endif
+}
+
+/*
+ * Read a single byte from the serial port. Returns 1 on success, 0
+ * otherwise. When the function is succesfull, the character read is
+ * written into its argument c.
+ */
+int serial_getc (void)
+{
+#ifdef CONFIG_FFUART
+	while (!(FFLSR & LSR_DR));
+
+	return (char) FFRBR & 0xff;
+#elif defined(CONFIG_BTUART)
+	while (!(BTLSR & LSR_DR));
+
+	return (char) BTRBR & 0xff;
+#elif defined(CONFIG_STUART)
+#endif
+}
+
+void
+serial_puts (const char *s)
+{
+	while (*s) {
+		serial_putc (*s++);
+	}
+}
diff --git a/cpu/pxa/start.S b/cpu/pxa/start.S
new file mode 100644
index 000000000..95b30e44e
--- /dev/null
+++ b/cpu/pxa/start.S
@@ -0,0 +1,474 @@
+/*
+ *  armboot - Startup Code for XScale
+ *
+ *  Copyright (C) 1998	Dan Malek <dmalek@jlc.net>
+ *  Copyright (C) 1999	Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
+ *  Copyright (C) 2000	Wolfgang Denk <wd@denx.de>
+ *  Copyright (C) 2001	Alex Züpke <azu@sysgo.de>
+ *  Copyright (C) 2002	Kyle Harris <kharris@nexus-tech.net>
+ *  Copyright (C) 2003  Robert Schwebel <r.schwebel@pengutronix.de>
+ *  Copyright (C) 2003  Kai-Uwe Bloehm <kai-uwe.bloem@auerswald.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+
+.globl _start
+_start: b	reset
+	ldr	pc, _undefined_instruction
+	ldr	pc, _software_interrupt
+	ldr	pc, _prefetch_abort
+	ldr	pc, _data_abort
+	ldr	pc, _not_used
+	ldr	pc, _irq
+	ldr	pc, _fiq
+
+_undefined_instruction: .word undefined_instruction
+_software_interrupt:	.word software_interrupt
+_prefetch_abort:	.word prefetch_abort
+_data_abort:		.word data_abort
+_not_used:		.word not_used
+_irq:			.word irq
+_fiq:			.word fiq
+
+	.balignl 16,0xdeadbeef
+
+
+/*
+ * Startup Code (reset vector)
+ *
+ * do important init only if we don't start from memory!
+ * - relocate armboot to ram
+ * - setup stack
+ * - jump to second stage
+ */
+
+/*
+ * CFG_MEM_END is in the board dependent config-file (configs/config_BOARD.h)
+ */
+_TEXT_BASE:
+	.word	TEXT_BASE
+
+.globl _armboot_start
+_armboot_start:
+	.word _start
+
+/*
+ * Note: _armboot_end_data and _armboot_end are defined
+ * by the (board-dependent) linker script.
+ * _armboot_end_data is the first usable FLASH address after armboot
+ */
+.globl _armboot_end_data
+_armboot_end_data:
+	.word armboot_end_data
+.globl _armboot_end
+_armboot_end:
+	.word armboot_end
+
+/*
+ * This is defined in the board specific linker script
+ */
+.globl _bss_start	
+_bss_start:	
+	.word bss_start
+
+.globl _bss_end
+_bss_end:
+	.word bss_end
+
+/*
+ * _armboot_real_end is the first usable RAM address behind armboot
+ * and the various stacks
+ */
+.globl _armboot_real_end
+_armboot_real_end:
+	.word 0x0badc0de
+
+/*
+ * We relocate uboot to this address (end of RAM - 128 KiB)
+ */
+.globl _uboot_reloc
+_uboot_reloc:
+	.word TEXT_BASE
+
+#ifdef CONFIG_USE_IRQ
+/* IRQ stack memory (calculated at run-time) */
+.globl IRQ_STACK_START
+IRQ_STACK_START:
+	.word	0x0badc0de
+
+/* IRQ stack memory (calculated at run-time) */
+.globl FIQ_STACK_START
+FIQ_STACK_START:
+	.word 0x0badc0de
+#endif
+
+
+/****************************************************************************/
+/*									    */
+/* the actual reset code						    */
+/*									    */
+/****************************************************************************/
+
+reset:
+	mrs	r0,cpsr			/* set the cpu to SVC32 mode	    */
+	bic	r0,r0,#0x1f		/* (superviser mode, M=10011)	    */
+	orr	r0,r0,#0x13
+	msr	cpsr,r0
+
+	bl	cpu_init_crit		/* we do sys-critical inits	    */
+
+relocate:				/* relocate U-Boot to RAM	    */
+	adr	r0, _start		/* r0 <- current position of code   */
+	ldr	r1, _TEXT_BASE		/* test if we run from flash or RAM */	
+	cmp     r0, r1                  /* don't reloc during debug         */
+	beq     stack_setup
+
+	ldr	r2, _armboot_start
+	ldr	r3, _armboot_end
+	sub	r2, r3, r2		/* r2 <- size of armboot            */
+	add	r2, r0, r2		/* r2 <- source end address         */
+
+copy_loop:
+	ldmia	r0!, {r3-r10}		/* copy from source address [r0]    */
+	stmia	r1!, {r3-r10}		/* copy to   target address [r1]    */
+	cmp	r0, r2			/* until source end addreee [r2]    */
+	ble	copy_loop
+
+	/* Set up the stack						    */
+
+stack_setup:
+
+	ldr	r0, _uboot_reloc	/* upper 128 KiB: relocated uboot   */
+	sub	r0, r0, #CFG_MALLOC_LEN /* malloc area			    */
+					/* FIXME: bdinfo should be here	    */
+	sub	sp, r0, #12		/* leave 3 words for abort-stack    */
+
+clear_bss:
+
+	ldr	r0, _bss_start		/* find start of bss segment        */
+	add	r0, r0, #4		/* start at first byte of bss       */
+	ldr	r1, _bss_end		/* stop here                        */
+	mov 	r2, #0x00000000		/* clear                            */
+
+clbss_l:str	r2, [r0]		/* clear loop...                    */
+	add	r0, r0, #4
+	cmp	r0, r1
+	bne	clbss_l	 
+
+
+	ldr	pc, _start_armboot
+
+_start_armboot: .word start_armboot
+
+
+/****************************************************************************/
+/*									    */
+/* CPU_init_critical registers						    */
+/*									    */
+/* - setup important registers						    */
+/* - setup memory timing						    */
+/*									    */
+/****************************************************************************/
+
+/* Interrupt-Controller base address				            */
+IC_BASE:	   .word	   0x40d00000
+#define ICMR	0x04
+
+/* Reset-Controller */
+RST_BASE:	.word	0x40f00030
+#define RCSR	0x00
+
+/* Operating System Timer */
+OSTIMER_BASE:	.word	0x40a00000
+#define OSMR3	0x0C
+#define OSCR	0x10
+#define OWER	0x18
+#define OIER	0x1C
+
+/* Clock Manager Registers					            */
+CC_BASE:	.word	0x41300000
+#define CCCR	0x00
+cpuspeed:	.word	CFG_CPUSPEED
+
+
+	/* RS: ???							    */
+	.macro CPWAIT
+	mrc  p15,0,r0,c2,c0,0
+	mov  r0,r0
+	sub  pc,pc,#4
+	.endm
+
+
+cpu_init_crit:
+
+	/* mask all IRQs						    */
+	ldr	r0, IC_BASE
+	mov	r1, #0x00
+	str	r1, [r0, #ICMR]
+
+#if defined(CFG_CPUSPEED)
+
+	/* set clock speed */
+	ldr	r0, CC_BASE
+	ldr	r1, cpuspeed
+	str	r1, [r0, #CCCR]
+	mov	r0, #2
+	mcr	p14, 0, r0, c6, c0, 0
+
+setspeed_done:
+#endif
+
+	/*
+	 * before relocating, we have to setup RAM timing
+	 * because memory timing is board-dependend, you will
+	 * find a memsetup.S in your board directory.
+	 */
+	mov	ip,	lr
+	bl	memsetup
+	mov	lr,	ip
+
+	/* Memory interfaces are working. Disable MMU and enable I-cache.   */
+
+	ldr	r0, =0x2001		/* enable access to all coproc.	    */
+	mcr	p15, 0, r0, c15, c1, 0
+	CPWAIT
+
+	mcr	p15, 0, r0, c7, c10, 4	/* drain the write & fill buffers   */
+	CPWAIT
+
+	mcr	p15, 0, r0, c7, c7, 0	/* flush Icache, Dcache and BTB	    */
+	CPWAIT
+
+	mcr	p15, 0, r0, c8, c7, 0	/* flush instuction and data TLBs   */
+	CPWAIT
+
+	/* Enable the Icache						    */
+/*
+	mrc	p15, 0, r0, c1, c0, 0
+	orr	r0, r0, #0x1800
+	mcr	p15, 0, r0, c1, c0, 0
+	CPWAIT
+*/
+	mov	pc, lr
+
+
+/****************************************************************************/
+/*									    */
+/* Interrupt handling							    */
+/*									    */
+/****************************************************************************/
+
+/* IRQ stack frame							    */
+
+#define S_FRAME_SIZE	72
+
+#define S_OLD_R0	68
+#define S_PSR		64
+#define S_PC		60
+#define S_LR		56
+#define S_SP		52
+
+#define S_IP		48
+#define S_FP		44
+#define S_R10		40
+#define S_R9		36
+#define S_R8		32
+#define S_R7		28
+#define S_R6		24
+#define S_R5		20
+#define S_R4		16
+#define S_R3		12
+#define S_R2		8
+#define S_R1		4
+#define S_R0		0
+
+#define MODE_SVC 0x13
+
+	/* use bad_save_user_regs for abort/prefetch/undef/swi ...	    */
+
+	.macro	bad_save_user_regs
+	sub	sp, sp, #S_FRAME_SIZE
+	stmia	sp, {r0 - r12}			/* Calling r0-r12	    */
+	add	r8, sp, #S_PC
+
+	ldr	r2, _armboot_end
+	add	r2, r2, #CONFIG_STACKSIZE
+	sub	r2, r2, #8
+	ldmia	r2, {r2 - r4}			/* get pc, cpsr, old_r0	    */
+	add	r0, sp, #S_FRAME_SIZE		/* restore sp_SVC	    */
+
+	add	r5, sp, #S_SP
+	mov	r1, lr
+	stmia	r5, {r0 - r4}			/* save sp_SVC, lr_SVC, pc, cpsr, old_r */
+	mov	r0, sp
+	.endm
+
+
+	/* use irq_save_user_regs / irq_restore_user_regs for		     */
+	/* IRQ/FIQ handling						     */
+
+	.macro	irq_save_user_regs
+	sub	sp, sp, #S_FRAME_SIZE
+	stmia	sp, {r0 - r12}			/* Calling r0-r12	     */
+	add	r8, sp, #S_PC
+	stmdb	r8, {sp, lr}^			/* Calling SP, LR	     */
+	str	lr, [r8, #0]			/* Save calling PC	     */
+	mrs	r6, spsr
+	str	r6, [r8, #4]			/* Save CPSR		     */
+	str	r0, [r8, #8]			/* Save OLD_R0		     */
+	mov	r0, sp
+	.endm
+
+	.macro	irq_restore_user_regs
+	ldmia	sp, {r0 - lr}^			@ Calling r0 - lr
+	mov	r0, r0
+	ldr	lr, [sp, #S_PC]			@ Get PC
+	add	sp, sp, #S_FRAME_SIZE
+	subs	pc, lr, #4			@ return & move spsr_svc into cpsr
+	.endm
+
+	.macro get_bad_stack
+	ldr	r13, _armboot_end		@ setup our mode stack
+	add	r13, r13, #CONFIG_STACKSIZE	@ resides at top of normal stack
+	sub	r13, r13, #8
+
+	str	lr, [r13]			@ save caller lr / spsr
+	mrs	lr, spsr
+	str	lr, [r13, #4]
+
+	mov	r13, #MODE_SVC			@ prepare SVC-Mode
+	msr	spsr_c, r13
+	mov	lr, pc
+	movs	pc, lr
+	.endm
+
+	.macro get_irq_stack			@ setup IRQ stack
+	ldr	sp, IRQ_STACK_START
+	.endm
+
+	.macro get_fiq_stack			@ setup FIQ stack
+	ldr	sp, FIQ_STACK_START
+	.endm
+
+
+/****************************************************************************/
+/*									    */
+/* exception handlers							    */
+/*									    */
+/****************************************************************************/
+
+	.align	5
+undefined_instruction:
+	get_bad_stack
+	bad_save_user_regs
+	bl	do_undefined_instruction
+
+	.align	5
+software_interrupt:
+	get_bad_stack
+	bad_save_user_regs
+	bl	do_software_interrupt
+
+	.align	5
+prefetch_abort:
+	get_bad_stack
+	bad_save_user_regs
+	bl	do_prefetch_abort
+
+	.align	5
+data_abort:
+	get_bad_stack
+	bad_save_user_regs
+	bl	do_data_abort
+
+	.align	5
+not_used:
+	get_bad_stack
+	bad_save_user_regs
+	bl	do_not_used
+
+#ifdef CONFIG_USE_IRQ
+
+	.align	5
+irq:
+	get_irq_stack
+	irq_save_user_regs
+	bl	do_irq
+	irq_restore_user_regs
+
+	.align	5
+fiq:
+	get_fiq_stack
+	irq_save_user_regs		/* someone ought to write a more    */
+	bl	do_fiq			/* effiction fiq_save_user_regs	    */
+	irq_restore_user_regs
+
+#else
+
+	.align	5
+irq:
+	get_bad_stack
+	bad_save_user_regs
+	bl	do_irq
+
+	.align	5
+fiq:
+	get_bad_stack
+	bad_save_user_regs
+	bl	do_fiq
+
+#endif
+
+/****************************************************************************/
+/*                                                                          */
+/* Reset function: the PXA250 doesn't have a reset function, so we have to  */
+/* perform a watchdog timeout for a soft reset.                             */
+/*                                                                          */
+/****************************************************************************/
+
+	.align	5
+.globl reset_cpu
+
+	/* FIXME: this code is PXA250 specific. How is this handled on      */
+	/*        other XScale processors?                                  */
+
+reset_cpu:
+
+	/* We set OWE:WME (watchdog enable) and wait until timeout happens  */
+
+	ldr	r0, OSTIMER_BASE
+	ldr	r1, [r0, #OWER]
+	orr	r1, r1, #0x0001			/* bit0: WME                */
+	str	r1, [r0, #OWER]
+
+	/* OS timer does only wrap every 1165 seconds, so we have to set    */
+	/* the match register as well.                                      */
+
+	ldr	r1, [r0, #OSCR]			/* read OS timer            */
+	add	r1, r1, #0x800			/* let OSMR3 match after    */
+	add	r1, r1, #0x800			/* 4096*(1/3.6864MHz)=1ms   */
+	str	r1, [r0, #OSMR3]
+
+reset_endless:
+
+	b	reset_endless
+