aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/usb/cdns3/core.c
Commit message (Collapse)AuthorAgeFilesLines
* usb: cdns3: fix NULL pointer dereference on no platform dataRoger Quadros2021-03-111-1/+1
| | | | | | | | | | | | | | [ Upstream commit 448373d9db1a7000072f65103af19e20503f0c0c ] Some platforms (e.g. TI) will not have any platform data which will lead to NULL pointer dereference if we don't check for NULL pdata. Fixes: 7cea9657756b ("usb: cdns3: add quirk for enable runtime pm by default") Reported-by: Nishanth Menon <nm@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* usb: cdns3: add quirk for enable runtime pm by defaultPeter Chen2021-03-111-1/+2
| | | | | | | | | | | [ Upstream commit 7cea9657756b2c83069a775c0671ff169bce456a ] Some vendors (eg: NXP) may want to enable runtime pm by default for power saving, add one quirk for it. Reviewed-by: Jun Li <jun.li@nxp.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* usb: cdns3: core: fix goto label for error pathPeter Chen2020-11-301-1/+1
| | | | | | | | The usb_role_switch_register has been already called, so if the devm_request_irq has failed, it needs to call usb_role_switch_unregister. Fixes: b1234e3b3b26 ("usb: cdns3: add runtime PM support") Signed-off-by: Peter Chen <peter.chen@nxp.com>
* usb: cdns3: Fix hardware based role switchRoger Quadros2020-11-301-12/+15
| | | | | | | | | | Hardware based role switch is broken as the driver always skips it. Fix this by registering for SW role switch only if 'usb-role-switch' property is present in the device tree. Fixes: 50642709f659 ("usb: cdns3: core: quit if it uses role switch class") Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
* usb: cdns3: core: quit if it uses role switch classPeter Chen2020-10-021-0/+4
| | | | | | | | If the board uses role switch class for switching the role, it should not depends on SoC OTG hardware siginal any more, so quit early. Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
* usb: cdns3: Enable workaround for USB2.0 PHY Rx compliance test PHY lockupPawel Laszczak2020-10-021-0/+2
| | | | | | | | | | | | | | | | | | | | USB2.0 PHY hangs in Rx Compliance test when the incoming packet amplitude is varied below and above the Squelch Level of Receiver during the active packet multiple times. Version 1 of the controller allows PHY to be reset when RX fail condition is detected to work around the above issue. This feature is disabled by default and needs to be enabled using a bit from the newly added PHYRST_CFG register. This patch enables the workaround. There is no way to know controller version before device controller is started and the workaround needs to be applied for both host and device modes, so we rely on a DT property do decide when to apply the workaround. Signed-off-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
* usb: cdns3: add runtime PM supportPeter Chen2020-10-021-17/+136
| | | | | | | | | | | | | | | | | | | | | | | | | | | Introduce runtime PM and wakeup interrupt handler for cdns3, the runtime PM is default off since other cdns3 may not implement glue layer support for runtime PM. One typical wakeup event use case is xHCI runtime suspend will clear USBCMD.RS bit, after that the xHCI will not trigger any interrupts, so its parent (cdns core device) needs to resume xHCI device when any (wakeup) events occurs at host port. When the controller is in low power mode, the lpm flag will be set. The interrupt triggered later than lpm flag is set considers as wakeup interrupt and handled at cdns_wakeup_irq. Once the wakeup occurs, it first disables interrupt to avoid later interrupt occurrence since the controller is in low power mode at that time, and access registers may be invalid at that time. At wakeup handler, it will call pm_request_resume to wakeup xHCI device, and at runtime resume handler, it will enable interrupt again. The API platform_suspend is introduced for glue layer to implement platform specific PM sequence. Reviewed-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
* usb: cdns3: introduce set_phy_power_on{off} APIsPeter Chen2020-10-021-15/+28
| | | | | | | | | | | | Since we have both USB2 and USB3 PHYs for cdns3 controller, it is better we have unity APIs to handle both USB2 and USB3's power, it could simplify code for error handling and further power management implementation. Reviewed-by: Pawel Laszczak <pawell@cadence.com> Reviewed-by: Jun Li <jun.li@nxp.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
* usb: cdns3: convert to devm_platform_ioremap_resource_bynameChunfeng Yun2020-07-291-2/+1
| | | | | | | | | | Use devm_platform_ioremap_resource_byname() to simplify code Cc: Peter Chen <peter.chen@nxp.com> Reviewed-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1595404275-8449-3-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: cdns3: core: removed overwriting some error codePawel Laszczak2020-07-241-6/+2
| | | | | | | | | Some error code can be preserved, so we can remove overwriting error code returned by some functions. Signed-off-by: Pawel Laszczak <pawell@cadence.com> Reviewed-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
* usb: cdns3: core: removed 'goto not_otg'Pawel Laszczak2020-07-241-11/+9
| | | | | | | | Patch removes 'goto not_otg' instruction from cdns3_hw_role_state_machine function. Signed-off-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
* usb: cdns3: drd: removed not needed variables initializationPawel Laszczak2020-07-241-2/+2
| | | | | | | | | Patch remove some variables initialization from core.c and drd.c file. Reviewed-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
* usb: cdns3: core: removed cdns3_get_current_role_driver functionPawel Laszczak2020-07-241-7/+0
| | | | | | | | Function is not used in driver so it can be removed. Signed-off-by: Pawel Laszczak <pawell@cadence.com> Reviewed-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
* usb: cdns3: core: Fix incorrect formatting and misspelled function arg docsLee Jones2020-07-031-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | There are 3 misspellings and 1 incorrect format used in this file's kerneldoc function headers. Fixing them squashes the following W=1 kernel build warnings: drivers/usb/cdns3/gadget.c:653: warning: Function parameter or member 'priv_ep' not described in 'cdns3_wa2_descmissing_packet' drivers/usb/cdns3/gadget.c:653: warning: Excess function parameter 'priv_dev' description in 'cdns3_wa2_descmissing_packet' drivers/usb/cdns3/gadget.c:1088: warning: Function parameter or member 'request' not described in 'cdns3_ep_run_transfer' drivers/usb/cdns3/gadget.c:2574: warning: Function parameter or member 'priv_ep' not described in '__cdns3_gadget_ep_set_halt' drivers/usb/cdns3/gadget.c:2574: warning: Excess function parameter 'ep' description in '__cdns3_gadget_ep_set_halt' drivers/usb/cdns3/gadget.c:2595: warning: Function parameter or member 'priv_ep' not described in '__cdns3_gadget_ep_clear_halt' drivers/usb/cdns3/gadget.c:2595: warning: Excess function parameter 'ep' description in '__cdns3_gadget_ep_clear_halt' drivers/usb/cdns3/gadget.c:2898: warning: Function parameter or member 'priv_dev' not described in 'cdns3_init_eps' drivers/usb/cdns3/gadget.c:2898: warning: Excess function parameter 'cdns3' description in 'cdns3_init_eps' drivers/usb/cdns3/gadget.c:3210: warning: Function parameter or member 'cdns' not described in 'cdns3_gadget_init' Cc: Pawel Laszczak <pawell@cadence.com> Cc: Peter Chen <peter.chen@nxp.com> Cc: Roger Quadros <rogerq@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200702144625.2533530-14-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: cdns3: change "cdsn3" to"cdns3"Peter Chen2020-04-161-5/+3
| | | | | | | | | | And delete cdsn3_hw_role_state_machine declare which doesn't be needed. Signed-off-by: Peter Chen <peter.chen@nxp.com> Reviewed-by: Roger Quadros <rogerq@ti.com> Link: https://lore.kernel.org/r/20200331081005.32752-3-peter.chen@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: cdns3: delete role_overridePeter Chen2020-04-161-37/+0
| | | | | | | | | | | | | | | | | | | In short, we have three kinds of role switches: - Based on SoC: ID and VBUS - Based on external connnctor, eg, Type-C or GPIO Connector - Based on user choices through sysfs Since HW handling and usb-role-switch handling are at different places, we do not need role_override any more, and this flag could not judge external connector case well. With role_override deleted, We use cdns3_hw_role_switch for the 1st use case, and usb-role-switch for the 2nd and 3rd cases. Signed-off-by: Peter Chen <peter.chen@nxp.com> Reviewed-by: Roger Quadros <rogerq@ti.com> Link: https://lore.kernel.org/r/20200331081005.32752-2-peter.chen@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: cdns3: core: get role switch node from firmwarePeter Chen2020-04-161-0/+2
| | | | | | | | | | After that, the role switch device (eg, Type-C device) could call cdns3_role_set to finish the role switch. Signed-off-by: Peter Chen <peter.chen@nxp.com> Reviewed-by: Roger Quadros <rogerq@ti.com> Link: https://lore.kernel.org/r/20200331081005.32752-1-peter.chen@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: roles: Provide the switch drivers handle to the switch in the APIHeikki Krogerus2020-03-041-11/+11
| | | | | | | | | | | | | | | | | | | | | The USB role callback functions had a parameter pointing to the parent device (struct device) of the switch. The assumption was that the switch parent is always the controller. Firstly, that may not be true in every case, and secondly, it prevents us from supporting devices that supply multiple muxes. Changing the first parameter of usb_role_switch_set_t and usb_role_switch_get_t from struct device to struct usb_role_switch. Cc: Peter Chen <Peter.Chen@nxp.com> Cc: Felipe Balbi <balbi@kernel.org> Cc: Chunfeng Yun <chunfeng.yun@mediatek.com> Cc: Bin Liu <b-liu@ti.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20200302135353.56659-6-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: cdns3: Error out if USB_DR_MODE_UNKNOWN in cdns3_core_init_role()Roger Quadros2019-10-181-1/+3
| | | | | | | | | | USB_DR_MODE_UNKNOWN should be treated as error as it is done in cdns3_drd_update_mode(). Fixes: 02ffc26df96b ("usb: cdns3: fix cdns3_core_init_role()") Signed-off-by: Roger Quadros <rogerq@ti.com> Link: https://lore.kernel.org/r/20191017075801.8734-1-rogerq@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: cdns3: fix cdns3_core_init_role()Roger Quadros2019-10-101-1/+19
| | | | | | | | | | | | | | | | | At startup we should trigger the HW state machine only if it is OTG mode. Otherwise we should just start the respective role. Initialize idle role by default. If we don't do this then cdns3_idle_role_stop() is not called when switching to host/device role and so lane switch mechanism doesn't work. This results to super-speed device not working in one orientation if it was plugged before driver probe. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Link: https://lore.kernel.org/r/20191007121601.25996-2-rogerq@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: cdns3: Remove redundant dev_err call in cdns3_probe()Wei Yongjun2019-09-031-3/+1
| | | | | | | | | | There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Link: https://lore.kernel.org/r/20190903153625.85691-1-weiyongjun1@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: cdns3: Add Cadence USB3 DRD DriverPawel Laszczak2019-08-291-0/+653
This patch introduce new Cadence USBSS DRD driver to Linux kernel. The Cadence USBSS DRD Controller is a highly configurable IP Core which can be instantiated as Dual-Role Device (DRD), Peripheral Only and Host Only (XHCI)configurations. The current driver has been validated with FPGA platform. We have support for PCIe bus, which is used on FPGA prototyping. The host side of USBSS-DRD controller is compliant with XHCI specification, so it works with standard XHCI Linux driver. Signed-off-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-06-23 23:38:06 +0000