aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/scsi/qla2xxx/qla_init.c
Commit message (Collapse)AuthorAgeFilesLines
* scsi: qla2xxx: Restore initiator in dual modeDmitry Bogdanov2021-09-301-1/+2
| | | | | | | | | | | | | | | | [ Upstream commit 5f8579038842d77e6ce05e1df6bf9dd493b0e3ef ] In dual mode in case of disabling the target, the whole port goes offline and initiator is turned off too. Fix restoring initiator mode after disabling target in dual mode. Link: https://lore.kernel.org/r/20210915153239.8035-1-d.bogdanov@yadro.com Fixes: 0645cb8350cd ("scsi: qla2xxx: Add mode control for each physical port") Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* scsi: qla2xxx: Prevent PRLI in target modeAnastasia Kovaleva2021-05-191-0/+3
| | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit fcb16d9a8ecf1e9bfced0fc654ea4e2caa7517f4 ] In a case when the initiator in P2P mode by some circumstances does not send PRLI, the target, in a case when the target port's WWPN is less than initiator's, changes the discovery state in DSC_GNL. When gnl completes it sends PRLI to the initiator. Usually the initiator in P2P mode always sends PRLI. We caught this issue on Linux stable v5.4.6 https://www.spinics.net/lists/stable/msg458515.html. Fix this particular corner case in the behaviour of the P2P mod target login state machine. Link: https://lore.kernel.org/r/20210422153414.4022-1-a.kovaleva@yadro.com Fixes: a9ed06d4e640 ("scsi: qla2xxx: Allow PLOGI in target mode") Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Anastasia Kovaleva <a.kovaleva@yadro.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* scsi: qla2xxx: Fix N2N and NVMe connect retry failureQuinn Tran2020-12-301-19/+52
| | | | | | | | | | | | | | | | [ Upstream commit 07a5f69248e3486e387c40af64793466371c7d91 ] FC-NVMe target discovery failed when initiator wwpn < target wwpn in an N2N (Direct Attach) config, where the driver was stuck on FCP PRLI mode and failed to retry with NVMe PRLI. Link: https://lore.kernel.org/r/20201202132312.19966-10-njavali@marvell.com Fixes: 84ed362ac40c ("scsi: qla2xxx: Dual FCP-NVMe target port support”) Fixes: 983f127603fa ("scsi: qla2xxx: Retry PLOGI on FC-NVMe PRLI failure”) Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* Merge tag 'spdx-5.10-rc1' of ↵Linus Torvalds2020-10-141-2/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx Pull SPDX updates from Greg KH: "Here are some SPDX-specific changes for 5.10-rc1. They include: - driver fixes to make spdxcheck.pl work properly - add GFDL licenses as "deprecated" but required due to some of our documentation using them - add Zlib license as "deprecated" but required because we have code with this license in the tree. - convert some drivers to have SPDX identifiers that previously didn't have them. All have been in linux-next for a very long time with no reported issues" * tag 'spdx-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: scripts/spdxcheck.py: handle license identifiers in XML comments net/mlx5: IPsec: make spdxcheck.py happy LICENSES/deprecated: add Zlib license text LICENSE: add GFDL deprecated licenses net/qla3xxx: Convert to SPDX license identifiers net/qlge: Convert to SPDX license identifiers net/qlcnic: Convert to SPDX license identifiers scsi/qla2xxx: Convert to SPDX license identifiers scsi/qla4xxx: Convert to SPDX license identifiers
| * scsi/qla2xxx: Convert to SPDX license identifiersThomas Gleixner2020-09-161-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All files in this driver directory contain the following notice: See LICENSE.qla2xxx for copyright and licensing details. LICENSE.qla2xxx can be found in Documentation/scsi/. The file contains: - A copyright notice This copyright notice is redundant as all files contain the same copyright notice already - A license notice You may modify and redistribute the device driver code under the GNU General Public License (a copy of which is attached hereto as Exhibit A) published by the Free Software Foundation (version 2). This can be replaced with the corresponding SPDX license identifier (GPL-2.0-only) in the source files which reference this license file. - The full GPLv2 license text A redundant copy of LICENSES/preferred/GPL-2.0 Remove the notices and add the SPDX license identifier GPL-2.0-only to the source files. Finally remove the now redundant LICENSE.qla2xxx file. Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Acked-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Acked-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds2020-10-141-30/+69
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull SCSI updates from James Bottomley: "The usual driver updates (ufs, qla2xxx, tcmu, ibmvfc, lpfc, smartpqi, hisi_sas, qedi, qedf, mpt3sas) and minor bug fixes. There are only three core changes: adding sense codes, cleaning up noretry and adding an option for limitless retries" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (226 commits) scsi: hisi_sas: Recover PHY state according to the status before reset scsi: hisi_sas: Filter out new PHY up events during suspend scsi: hisi_sas: Add device link between SCSI devices and hisi_hba scsi: hisi_sas: Add check for methods _PS0 and _PR0 scsi: hisi_sas: Add controller runtime PM support for v3 hw scsi: hisi_sas: Switch to new framework to support suspend and resume scsi: hisi_sas: Use hisi_hba->cq_nvecs for calling calling synchronize_irq() scsi: qedf: Remove redundant assignment to variable 'rc' scsi: lpfc: Remove unneeded variable 'status' in lpfc_fcp_cpu_map_store() scsi: snic: Convert to use DEFINE_SEQ_ATTRIBUTE macro scsi: qla4xxx: Delete unneeded variable 'status' in qla4xxx_process_ddb_changed scsi: sun_esp: Use module_platform_driver to simplify the code scsi: sun3x_esp: Use module_platform_driver to simplify the code scsi: sni_53c710: Use module_platform_driver to simplify the code scsi: qlogicpti: Use module_platform_driver to simplify the code scsi: mac_esp: Use module_platform_driver to simplify the code scsi: jazz_esp: Use module_platform_driver to simplify the code scsi: mvumi: Fix error return in mvumi_io_attach() scsi: lpfc: Drop nodelist reference on error in lpfc_gen_req() scsi: be2iscsi: Fix a theoretical leak in beiscsi_create_eqs() ...
| * scsi: qla2xxx: Fix reset of MPI firmwareArun Easi2020-09-291-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Normally, the MPI firmware is reset when an MPI dump is collected. If an unsaved MPI dump exists in the driver, though, an alternate mechanism is used. This mechanism, which was not fully correct, is not recommended and instead an MPI dump template walk is suggested to perform the MPI reset. To allow for the MPI dump template walk, extra space is reserved in the MPI dump buffer which gets used only when there is already an MPI dump in place. Link: https://lore.kernel.org/r/20200929102152.32278-5-njavali@marvell.com Fixes: cbb01c2f2f63 ("scsi: qla2xxx: Fix MPI failure AEN (8200) handling") Cc: stable@vger.kernel.org Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * scsi: qla2xxx: Fix buffer-buffer credit extraction errorQuinn Tran2020-09-291-24/+26
| | | | | | | | | | | | | | | | | | | | | | | | Current code uses wrong mailbox option to extract bbc from firmware. This field is nested inside of PLOGI payload. Extract bbc from PLOGI template payload. Link: https://lore.kernel.org/r/20200929102152.32278-3-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * scsi: qla2xxx: Add IOCB resource trackingQuinn Tran2020-09-221-0/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch tracks number of IOCB resources used in the I/O fast path. If the number of used IOCBs reach a high water limit, driver would return the I/O as busy and let upper layer retry. This prevents over subscription of IOCB resources where any future error recovery command is unable to cut through. Enable IOCB throttling by default. Link: https://lore.kernel.org/r/20200904045128.23631-12-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * scsi: qla2xxx: Performance tweakQuinn Tran2020-09-221-3/+1
| | | | | | | | | | | | | | | | | | | | Move statistics fields from vha struct to qpair to reduce memory thrashing. Link: https://lore.kernel.org/r/20200904045128.23631-8-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * scsi: qla2xxx: Setup debugfs entries for remote portsArun Easi2020-09-221-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | Create a base for adding remote port related entries in debugfs. Link: https://lore.kernel.org/r/20200904045128.23631-3-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * scsi: qla2xxx: Remove unneeded variable 'rval'Jason Yan2020-09-151-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | This addresses the following coccinelle warning: drivers/scsi/qla2xxx/qla_init.c:7112:5-9: Unneeded variable: "rval". Return "QLA_SUCCESS" on line 7115 Link: https://lore.kernel.org/r/20200911091021.2937708-1-yanaijie@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * Merge branch '5.9/scsi-fixes' into 5.10/scsi-ufsMartin K. Petersen2020-09-151-3/+3
| |\ | | | | | | | | | | | | | | | Resolve UFS discrepancies between fixes and queue. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * | scsi: qla2xxx: Warn if done() or free() are called on an already freed srbDaniel Wagner2020-09-091-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Emit a warning when ->done or ->free are called on an already freed srb. There is a hidden use-after-free bug in the driver which corrupts the srb memory pool which originates from the cleanup callbacks. An extensive search didn't bring any lights on the real problem. The initial fix was to set both pointers to NULL and try to catch invalid accesses. But instead the memory corruption was gone and the driver didn't crash. Since not all calling places check for NULL pointer, add explicitly default handlers. With this we workaround the memory corruption and add a debug help. Link: https://lore.kernel.org/r/20200908081516.8561-2-dwagner@suse.de Reviewed-by: Martin Wilck <mwilck@suse.com> Reviewed-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* | | Merge tag 'scsi-fixes' of ↵Linus Torvalds2020-09-081-3/+3
|\ \ \ | | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Eleven fixes, mostly in drivers or minor fixes in driver related infrastructure libraries (target, libfc and libsas). Most of the bugs fixed only show up under rare circumstances, the exception being the endianness problem in qla2xxx which is used as a device on some sparc systems" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: mpt3sas: Don't call disable_irq from IRQ poll handler scsi: megaraid_sas: Don't call disable_irq from process IRQ poll scsi: target: iscsi: Fix hang in iscsit_access_np() when getting tpg->np_login_sem scsi: libsas: Set data_dir as DMA_NONE if libata marks qc as NODATA scsi: target: iscsi: Fix data digest calculation scsi: lpfc: Update lpfc version to 12.8.0.4 scsi: lpfc: Extend the RDF FPIN Registration descriptor for additional events scsi: lpfc: Fix FLOGI/PLOGI receive race condition in pt2pt discovery scsi: lpfc: Fix setting IRQ affinity with an empty CPU mask scsi: qla2xxx: Fix regression on sparc64 scsi: libfc: Fix for double free() scsi: pm8001: Fix memleak in pm8001_exec_internal_task_abort
| * | scsi: qla2xxx: Fix regression on sparc64René Rebe2020-08-311-3/+3
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 98aee70d19a7 ("qla2xxx: Add endianizer to max_payload_size modifier.") in 2014 broke qla2xxx on sparc64, e.g. as in the Sun Blade 1000 / 2000. Unbreak by partial revert to fix endianness in nvram firmware default initialization. Also mark the second frame_payload_size in nvram_t __le16 to avoid new sparse warnings. Link: https://lore.kernel.org/r/20200827.222729.1875148247374704975.rene@exactcode.com Fixes: 98aee70d19a7 ("qla2xxx: Add endianizer to max_payload_size modifier.") Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Arun Easi <aeasi@marvell.com> Signed-off-by: René Rebe <rene@exactcode.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* / treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva2020-08-231-1/+1
|/ | | | | | | | | | Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
* Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds2020-08-061-19/+29
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull SCSI updates from James Bottomley: "This consists of the usual driver updates (ufs, qla2xxx, tcmu, lpfc, hpsa, zfcp, scsi_debug) and minor bug fixes. We also have a huge docbook fix update like most other subsystems and no major update to the core (the few non trivial updates are either minor fixes or removing an unused feature [scsi_sdb_cache])" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (307 commits) scsi: scsi_transport_srp: Sanitize scsi_target_block/unblock sequences scsi: ufs-mediatek: Apply DELAY_AFTER_LPM quirk to Micron devices scsi: ufs: Introduce device quirk "DELAY_AFTER_LPM" scsi: virtio-scsi: Correctly handle the case where all LUNs are unplugged scsi: scsi_debug: Implement tur_ms_to_ready parameter scsi: scsi_debug: Fix request sense scsi: lpfc: Fix typo in comment for ULP scsi: ufs-mediatek: Prevent LPM operation on undeclared VCC scsi: iscsi: Do not put host in iscsi_set_flashnode_param() scsi: hpsa: Correct ctrl queue depth scsi: target: tcmu: Make TMR notification optional scsi: target: tcmu: Implement tmr_notify callback scsi: target: tcmu: Fix and simplify timeout handling scsi: target: tcmu: Factor out new helper ring_insert_padding scsi: target: tcmu: Do not queue aborted commands scsi: target: tcmu: Use priv pointer in se_cmd scsi: target: Add tmr_notify backend function scsi: target: Modify core_tmr_abort_task() scsi: target: iscsi: Fix inconsistent debug message scsi: target: iscsi: Fix login error when receiving ...
| * scsi: qla2xxx: SAN congestion management implementationShyam Sundar2020-07-011-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Firmware Initialization with SCM enabled based on NVRAM setting and firmware support (About Firmware). * Enable PUREX and add support for fabric performance impact notification (FPIN) handling. * Allocate a default PUREX item for each vha to handle memory allocation failures in ISR. Link: https://lore.kernel.org/r/20200630102229.29660-3-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by: James Smart <james.smart@broadcom.com> Signed-off-by: Shyam Sundar <ssundar@marvell.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * scsi: qla2xxx: Make qla2x00_restart_isp() easier to readBart Van Assche2020-06-301-17/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of using complicated control flow to only have one return statement at the end of qla2x00_restart_isp(), return an error status as soon as it is known that this function will fail. Link: https://lore.kernel.org/r/20200629225454.22863-9-bvanassche@acm.org Cc: Nilesh Javali <njavali@marvell.com> Cc: Quinn Tran <qutran@marvell.com> Cc: Himanshu Madhani <himanshu.madhani@oracle.com> Cc: Martin Wilck <mwilck@suse.com> Cc: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* | scsi: qla2xxx: Fix a condition in qla2x00_find_all_fabric_devs()Dan Carpenter2020-06-261-1/+1
|/ | | | | | | | | | | This code doesn't make sense unless the correct "fcport" was found. Link: https://lore.kernel.org/r/20200619143041.GD267142@mwanda Fixes: 9dd9686b1419 ("scsi: qla2xxx: Add changes for devloss timeout in driver") Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by: Shyam Sundar <ssundar@marvell.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds2020-06-051-184/+196
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull SCSI updates from James Bottomley: :This series consists of the usual driver updates (qla2xxx, ufs, zfcp, target, scsi_debug, lpfc, qedi, qedf, hisi_sas, mpt3sas) plus a host of other minor updates. There are no major core changes in this series apart from a refactoring in scsi_lib.c" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (207 commits) scsi: ufs: ti-j721e-ufs: Fix unwinding of pm_runtime changes scsi: cxgb3i: Fix some leaks in init_act_open() scsi: ibmvscsi: Make some functions static scsi: iscsi: Fix deadlock on recovery path during GFP_IO reclaim scsi: ufs: Fix WriteBooster flush during runtime suspend scsi: ufs: Fix index of attributes query for WriteBooster feature scsi: ufs: Allow WriteBooster on UFS 2.2 devices scsi: ufs: Remove unnecessary memset for dev_info scsi: ufs-qcom: Fix scheduling while atomic issue scsi: mpt3sas: Fix reply queue count in non RDPQ mode scsi: lpfc: Fix lpfc_nodelist leak when processing unsolicited event scsi: target: tcmu: Fix a use after free in tcmu_check_expired_queue_cmd() scsi: vhost: Notify TCM about the maximum sg entries supported per command scsi: qla2xxx: Remove return value from qla_nvme_ls() scsi: qla2xxx: Remove an unused function scsi: iscsi: Register sysfs for iscsi workqueue scsi: scsi_debug: Parser tables and code interaction scsi: core: Refactor scsi_mq_setup_tags function scsi: core: Fix incorrect usage of shost_for_each_device scsi: qla2xxx: Fix endianness annotations in source files ...
| * scsi: qla2xxx: Fix endianness annotations in source filesBart Van Assche2020-05-191-28/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix all endianness complaints reported by sparse (C=2) without affecting the behavior of the code on little endian CPUs. Link: https://lore.kernel.org/r/20200518211712.11395-16-bvanassche@acm.org Cc: Nilesh Javali <njavali@marvell.com> Cc: Quinn Tran <qutran@marvell.com> Cc: Martin Wilck <mwilck@suse.com> Cc: Daniel Wagner <dwagner@suse.de> Cc: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * scsi: qla2xxx: Cast explicitly to uint16_t / uint32_tBart Van Assche2020-05-191-13/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Casting a pointer to void * and relying on an implicit cast from void * to uint16_t or uint32_t suppresses sparse warnings about endianness. Hence cast explicitly to uint16_t and uint32_t. Additionally, remove superfluous void * casts. Link: https://lore.kernel.org/r/20200518211712.11395-13-bvanassche@acm.org Cc: Arun Easi <aeasi@marvell.com> Cc: Nilesh Javali <njavali@marvell.com> Cc: Daniel Wagner <dwagner@suse.de> Cc: Himanshu Madhani <himanshu.madhani@oracle.com> Cc: Martin Wilck <mwilck@suse.com> Cc: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * scsi: qla2xxx: Change {RD,WRT}_REG_*() function names from upper case into ↵Bart Van Assche2020-05-191-103/+102
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | lower case This was suggested by Daniel Wagner. Link: https://lore.kernel.org/r/20200518211712.11395-12-bvanassche@acm.org Cc: Nilesh Javali <njavali@marvell.com> Cc: Quinn Tran <qutran@marvell.com> Cc: Martin Wilck <mwilck@suse.com> Cc: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * scsi: qla2xxx: Fix the code that reads from mailbox registersBart Van Assche2020-05-191-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make the MMIO accessors strongly typed such that the compiler checks whether the accessor function is used that matches the register width. Fix those MMIO accesses where another number of bits was read or written than the size of the register. Link: https://lore.kernel.org/r/20200518211712.11395-11-bvanassche@acm.org Cc: Nilesh Javali <njavali@marvell.com> Cc: Quinn Tran <qutran@marvell.com> Cc: Martin Wilck <mwilck@suse.com> Cc: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * scsi: qla2xxx: Fix spelling of a variable nameBart Van Assche2020-05-191-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Change "offet" into "offset" in a variable name. Link: https://lore.kernel.org/r/20200518211712.11395-2-bvanassche@acm.org Cc: Nilesh Javali <njavali@marvell.com> Cc: Quinn Tran <qutran@marvell.com> Cc: Martin Wilck <mwilck@suse.com> Reviewed-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Arun Easi <aeasi@marvell.com> Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * scsi: qla2xxx: Fix MPI failure AEN (8200) handlingArun Easi2020-04-241-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Today, upon an MPI failure AEN, on top of collecting an MPI dump, a regular firmware dump is also taken and then chip reset. This is disruptive to IOs and not required. Make the firmware dump collection, followed by chip reset, optional (not done by default). Firmware dump buffer and MPI dump buffer are independent of each other with this change and each can have dump that was taken at two different times for two different issues. The MPI dump is saved in a separate buffer and is retrieved differently from firmware dump. To collect full dump on MPI failure AEN, a module parameter is introduced: ql2xfulldump_on_mpifail (default: 0) Link: https://lore.kernel.org/r/20200331104015.24868-2-njavali@marvell.com Reported-by: kbuild test robot <lkp@intel.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * scsi: qla2xxx: Split qla2x00_configure_local_loop()Bart Van Assche2020-04-131-42/+50
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The size of the function qla2x00_configure_local_loop() hurts its readability. Hence split that function. This patch does not change any functionality. Link: https://lore.kernel.org/r/20200405225905.17171-1-bvanassche@acm.org Cc: Nilesh Javali <njavali@marvell.com> Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Quinn Tran <qutran@marvell.com> Cc: Martin Wilck <mwilck@suse.com> Cc: Daniel Wagner <dwagner@suse.de> Cc: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* | scsi: qla2xxx: Fix regression warningsNilesh Javali2020-04-131-2/+0
|/ | | | | | | | | | | | | | | | | | drivers/scsi/qla2xxx/qla_dbg.c:2542:7: warning: The scope of the variable 'pbuf' can be reduced. [variableScope] drivers/scsi/qla2xxx/qla_init.c:3615:6: warning: Variable 'rc' is assigned a value that is never used. [unreadVariable] drivers/scsi/qla2xxx/qla_isr.c:81:11-29: WARNING: dma_alloc_coherent use in rsp_els already zeroes out memory, so memset is not needed drivers/scsi/qla2xxx/qla_mbx.c:4889:15-33: WARNING: dma_alloc_coherent use in els_cmd_map already zeroes out memory, so memset is not needed [mkp: added newline after variable declaration] Link: https://lore.kernel.org/r/20200403084018.30766-2-njavali@marvell.com Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: qla2xxx: Serialize fc_port alloc in N2NQuinn Tran2020-02-281-0/+1
| | | | | | | | | | | | | For N2N, fc_port struct is created during report id acquisition. At later time, the loop resync (fabric, n2n, loop) would trigger the rest of the login using the created fc_port struct. The loop resync logic can trigger another fc_port allocation if the 1st allocation was not able to execute. This patch prevents the 2nd allocation trigger. Link: https://lore.kernel.org/r/20200226224022.24518-15-hmadhani@marvell.com Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: qla2xxx: Update BPM enablement semantics.Andrew Vasquez2020-02-281-26/+64
| | | | | | | | | | | | | | | | | | | | | | | | | | | | commit e4e3a2ce9556 ("scsi: qla2xxx: Add ability to autodetect SFP type") takes a heavy handed approach to BPM (Buffer Plus Management) enablement: 1) During hardware initialization, if an LR-capable transceiver is recognized, the driver schedules a disruptive post-initialization chip-reset (ISP-ABORT) to allow the BPM settings to be sent to the firmware. This chip-reset will result in (short-term) path-loss to all fc-rports and their attached SCSI devices. 2) LR-detection is triggered during any link-up event, resulting in a refresh and potential chip-reset Based on firmware-team guidance, upon LR-capable transceiver recognition, the driver's hardware initialization code will now re-execute firmware with the new BPM settings, then continue on with driver initialization. To address the second issue, the driver performs LR-capable detection upon the driver receiving a transceiver-insertion asynchronous event from firmware. No short-term path loss is needed with this new semantic. Link: https://lore.kernel.org/r/20200226224022.24518-10-hmadhani@marvell.com Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Andrew Vasquez <andrewv@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: qla2xxx: Improved secure flash support messagesMichael Hernandez2020-02-281-3/+3
| | | | | | | | | | This patch improved message for Secure Flash support. No functionality has been changed. Link: https://lore.kernel.org/r/20200226224022.24518-6-hmadhani@marvell.com Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Michael Hernandez <mhernandez@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: qla2xxx: Fix FCP-SCSI FC4 flag passing errorQuinn Tran2020-02-281-2/+2
| | | | | | | | | | | | This patch fixes issue where incorrect flag was used for sending switch commands. Link: https://lore.kernel.org/r/20200226224022.24518-5-hmadhani@marvell.com Fixes: e8c72ba51a15 ("[SCSI] qla2xxx: Use GFF_ID to check FCP-SCSI FC4 type before logging into Nx_Ports") Fixes: a4239945b8ad ("scsi: qla2xxx: Add switch command to simplify fabric discovery") Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: qla2xxx: Use FC generic update firmware options routine for ISP27xxGiridhar Malavali2020-02-281-66/+0
| | | | | | | | | | This patch uses generic firmware update options for FCoE based adapters as well to reduce code duplication. Link: https://lore.kernel.org/r/20200226224022.24518-4-hmadhani@marvell.com Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: qla2xxx: Avoid setting firmware options twice in 24xx_update_fw_options.Giridhar Malavali2020-02-281-7/+4
| | | | | | | | | | This patch moves ql2xrdpenable check earlier to avoids setting fw_option once again before exiting qla24xx_update_fw_options. Link: https://lore.kernel.org/r/20200226224022.24518-3-hmadhani@marvell.com Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: qla2xxx: Suppress endianness complaints in qla2x00_configure_local_loop()Bart Van Assche2020-02-281-6/+5
| | | | | | | | | | | | | | | Instead of changing endianness in-place, write the data in CPU endian format in another buffer and copy that buffer back. This patch does not change any functionality but silences some sparse endianness warnings. Link: https://lore.kernel.org/r/20200220043441.20504-3-bvanassche@acm.org Cc: Roman Bolshakov <r.bolshakov@yadro.com> Cc: Martin Wilck <mwilck@suse.com> Cc: Quinn Tran <qutran@marvell.com> Reviewed-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: qla2xxx: Use QLA_FW_STOPPED macro to propagate flagHimanshu Madhani2020-02-241-1/+1
| | | | | | | | | This patch uses QLA_FW_STOPPED macro so that flag is propogated to all the QPairs. Link: https://lore.kernel.org/r/20200212214436.25532-25-hmadhani@marvell.com Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: qla2xxx: Add ql2xrdpenable module parameter for RDPJoe Carnuccio2020-02-241-3/+9
| | | | | | | | | | | | This patch provides separate module parameter ql2xrdpenable to turn on/off RDP capability in the driver. However, if ql2xsmartsan parameter is enabled, it will also turn on ql2xfdmienable parameter since it is required for RDP to work. Link: https://lore.kernel.org/r/20200212214436.25532-9-hmadhani@marvell.com Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: qla2xxx: Add vendor extended RDP additions and amendmentsJoe Carnuccio2020-02-241-1/+14
| | | | | | | | | | | This patch adds RDP command support in the driver. With the help of new ql2xsmartsan parameter, driver will use PUREX IOCB mode to send RDP command to switch and will be able to receive various diagnostic data. Link: https://lore.kernel.org/r/20200212214436.25532-8-hmadhani@marvell.com Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: qla2xxx: Add changes in preparation for vendor extended FDMI/RDPJoe Carnuccio2020-02-241-8/+20
| | | | | | | | | | | This patch prepares code for implementing Vendor specific extended FDMI/RDP commands. It also addes support for MBC_GET_PORT_DATABASE and MBC_GET_RNID_PARAMS commands. Link: https://lore.kernel.org/r/20200212214436.25532-7-hmadhani@marvell.com Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: qla2xxx: Fix a NULL pointer dereference in an error pathBart Van Assche2020-01-201-9/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes the following Coverity complaint: FORWARD_NULL qla_init.c: 5275 in qla2x00_configure_local_loop() 5269 5270 if (fcport->scan_state == QLA_FCPORT_FOUND) 5271 qla24xx_fcport_handle_login(vha, fcport); 5272 } 5273 5274 cleanup_allocation: >>> CID 353340: (FORWARD_NULL) >>> Passing null pointer "new_fcport" to "qla2x00_free_fcport", which dereferences it. 5275 qla2x00_free_fcport(new_fcport); 5276 5277 if (rval != QLA_SUCCESS) { 5278 ql_dbg(ql_dbg_disc, vha, 0x2098, 5279 "Configure local loop error exit: rval=%x.\n", rval); 5280 } qla_init.c: 5275 in qla2x00_configure_local_loop() 5269 5270 if (fcport->scan_state == QLA_FCPORT_FOUND) 5271 qla24xx_fcport_handle_login(vha, fcport); 5272 } 5273 5274 cleanup_allocation: >>> CID 353340: (FORWARD_NULL) >>> Passing null pointer "new_fcport" to "qla2x00_free_fcport", which dereferences it. 5275 qla2x00_free_fcport(new_fcport); 5276 5277 if (rval != QLA_SUCCESS) { 5278 ql_dbg(ql_dbg_disc, vha, 0x2098, 5279 "Configure local loop error exit: rval=%x.\n", rval); 5280 } Fixes: 3dae220595ba ("scsi: qla2xxx: Use common routine to free fcport struct") Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Quinn Tran <qutran@marvell.com> Cc: Martin Wilck <mwilck@suse.com> Cc: Daniel Wagner <dwagner@suse.de> Cc: Roman Bolshakov <r.bolshakov@yadro.com> Link: https://lore.kernel.org/r/20200118042056.32232-1-bvanassche@acm.org Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: qla2xxx: Fix stuck session in GNLQuinn Tran2019-12-211-2/+13
| | | | | | | | | | | Fix race condition between GNL completion processing and GNL request. Late submission of GNL request was not seen by the GNL completion thread. This patch will re-submit the GNL request for late submission fcport. Link: https://lore.kernel.org/r/20191217220617.28084-13-hmadhani@marvell.com Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: qla2xxx: Consolidate fabric scanQuinn Tran2019-12-211-6/+2
| | | | | | | | | Consolidate scan for fabric loop and fabric topologies into a single scan. Link: https://lore.kernel.org/r/20191217220617.28084-11-hmadhani@marvell.com Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: qla2xxx: Correct fcport flags handlingShyam Sundar2019-12-211-1/+2
| | | | | | | | | | This patch fixes some instances of FCF_ASYNC_{SENT|ACTIVE} flag setting and clearning were missing. Link: https://lore.kernel.org/r/20191217220617.28084-10-hmadhani@marvell.com Signed-off-by: Shyam Sundar <ssundar@marvell.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: qla2xxx: Fix stuck login session using prli_pend_timerQuinn Tran2019-12-211-8/+26
| | | | | | | | | | | | | | Session is stuck if driver sees FW has received a PRLI. Driver allows FW to finish with processing of PRLI by checking back with FW at a later time to see if the PRLI has finished. Instead, driver failed to push forward after re-checking PRLI completion. Fixes: ce0ba496dccf ("scsi: qla2xxx: Fix stuck login session") Cc: stable@vger.kernel.org # 5.3 Link: https://lore.kernel.org/r/20191217220617.28084-9-hmadhani@marvell.com Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: qla2xxx: Use common routine to free fcport structQuinn Tran2019-12-191-1/+1
| | | | | | | | | This patch does not change any any functionality. Link: https://lore.kernel.org/r/20191217220617.28084-8-hmadhani@marvell.com Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: qla2xxx: Fix update_fcport for current_topologyHimanshu Madhani2019-12-191-1/+4
| | | | | | | | | logout_on_delete flag should not be set if the topology is Loop. This patch fixes unintentional logout during loop topology. Link: https://lore.kernel.org/r/20191217220617.28084-6-hmadhani@marvell.com Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: qla2xxx: Cleanup unused async_logout_doneShyam Sundar2019-12-191-10/+0
| | | | | | | | | This patch removes unused qla2x00_async_logout_done from the code. Link: https://lore.kernel.org/r/20191217220617.28084-5-hmadhani@marvell.com Signed-off-by: Shyam Sundar <ssundar@marvell.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: qla2xxx: Add a shadow variable to hold disc_state history of fcportShyam Sundar2019-12-191-14/+15
| | | | | | | | | | This patch adds a shadow variable to hold disc_state history for the fcport and prints state transition when the logging is enabled. Link: https://lore.kernel.org/r/20191217220617.28084-4-hmadhani@marvell.com Signed-off-by: Shyam Sundar <ssundar@marvell.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-03-03 18:45:32 +0000