aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/pci/controller/dwc
Commit message (Collapse)AuthorAgeFilesLines
* PCI: tegra194: Fix MSI-X programmingOm Prakash Singh2021-09-221-1/+1
| | | | | | | | | | | | | | | [ Upstream commit 43537cf7e351264a1f05ed42ad402942bfc9140e ] Lower order MSI-X address is programmed in MSIX_ADDR_MATCH_HIGH_OFF DBI register instead of higher order address. This patch fixes this programming mistake. Link: https://lore.kernel.org/r/20210623100525.19944-3-omp@nvidia.com Signed-off-by: Om Prakash Singh <omp@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* PCI: tegra194: Fix handling BME_CHGED eventOm Prakash Singh2021-09-221-15/+15
| | | | | | | | | | | | | | | [ Upstream commit ceb1412c1c8ca5b28c4252bdb15f2f1f17b4a1b0 ] In tegra_pcie_ep_hard_irq(), APPL_INTR_STATUS_L0 is stored in val and again APPL_INTR_STATUS_L1_0_0 is also stored in val. So when execution reaches "if (val & APPL_INTR_STATUS_L0_PCI_CMD_EN_INT)", val is not correct. Link: https://lore.kernel.org/r/20210623100525.19944-2-omp@nvidia.com Signed-off-by: Om Prakash Singh <omp@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* PCI: tegra194: Fix tegra_pcie_ep_raise_msi_irq() ill-defined shiftJon Hunter2021-07-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit f67092eff2bd40650aad54a1a1910160f41d864a ] tegra_pcie_ep_raise_msi_irq() shifted a signed 32-bit value left by 31 bits. The behavior of this is implementation-defined. Replace the shift by BIT(), which is well-defined. Found by cppcheck: $ cppcheck --enable=all drivers/pci/controller/dwc/pcie-tegra194.c Checking drivers/pci/controller/dwc/pcie-tegra194.c ... drivers/pci/controller/dwc/pcie-tegra194.c:1829:23: portability: Shifting signed 32-bit value by 31 bits is implementation-defined behaviour. See condition at line 1826. [shiftTooManyBitsSigned] appl_writel(pcie, (1 << irq), APPL_MSI_CTRL_1); ^ [bhelgaas: commit log] Link: https://lore.kernel.org/r/20210618160219.303092-1-jonathanh@nvidia.com Fixes: c57247f940e8 ("PCI: tegra: Add support for PCIe endpoint mode in Tegra194") Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* PCI: intel-gw: Fix INTx enableMartin Blumenstingl2021-07-201-4/+6
| | | | | | | | | | | | | | | | | | [ Upstream commit 655832d12f2251e04031294f547c86935a0a126d ] The legacy PCI interrupt lines need to be enabled using PCIE_APP_IRNEN bits 13 (INTA), 14 (INTB), 15 (INTC) and 16 (INTD). The old code however was taking (for example) "13" as raw value instead of taking BIT(13). Define the legacy PCI interrupt bits using the BIT() macro and then use these in PCIE_APP_IRN_INT. Link: https://lore.kernel.org/r/20210106135540.48420-1-martin.blumenstingl@googlemail.com Fixes: ed22aaaede44 ("PCI: dwc: intel: PCIe RC controller driver") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rahul Tanwar <rtanwar@maxlinear.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* PCI: tegra: Fix runtime PM imbalance in pex_ep_event_pex_rst_deassert()Dinghao Liu2021-05-221-1/+1
| | | | | | | | | | | | | | | | [ Upstream commit 5859c926d1f052ee61b5815b14658875c14f6243 ] pm_runtime_get_sync() will increase the runtime PM counter even it returns an error. Thus a pairing decrement is needed to prevent refcount leak. Fix this by replacing this API with pm_runtime_resume_and_get(), which will not change the runtime PM counter on error. Link: https://lore.kernel.org/r/20210408072700.15791-1-dinghao.liu@zju.edu.cn Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* PCI: keystone: Let AM65 use the pci_ops defined in pcie-designware-host.cKishon Vijay Abraham I2021-05-141-1/+2
| | | | | | | | | | | | | | | | | | | commit 3d0b2a3a87ce5ae85de46c4241afd52ab8b566fe upstream. Both TI's AM65x (K3) and TI's K2 PCIe driver are implemented in pci-keystone. However Only K2 PCIe driver should use it's own pci_ops for configuration space accesses. But commit 10a797c6e54a ("PCI: dwc: keystone: Use pci_ops for config space accessors") used custom pci_ops for both AM65x and K2. This breaks configuration space access for AM65x platform. Fix it here. Link: https://lore.kernel.org/r/20210317131518.11040-1-kishon@ti.com Fixes: 10a797c6e54a ("PCI: dwc: keystone: Use pci_ops for config space accessors") Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Krzysztof Wilczyński <kw@linux.com> Cc: <stable@vger.kernel.org> # v5.10 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* PCI: qcom: Use PHY_REFCLK_USE_PAD only for ipq8064Ansuel Smith2021-03-041-1/+3
| | | | | | | | | | | | | | | | | | | commit 2cfef1971aea6119ee27429181d6cb3383031ac2 upstream. The use of PHY_REFCLK_USE_PAD introduced a regression for apq8064 devices. It was tested that while apq doesn't require the padding, ipq SoC must use it or the kernel hangs on boot. Link: https://lore.kernel.org/r/20201019165555.8269-1-ansuelsmth@gmail.com Fixes: de3c4bf64897 ("PCI: qcom: Add support for tx term offset for rev 2.1.0") Reported-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: stable@vger.kernel.org # v4.19+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* PCI: dwc: Restore ATU memory resource setup to use last entryRob Herring2020-11-041-2/+6
| | | | | | | | | | | | | | | | | | | Prior to commit 0f71c60ffd26 ("PCI: dwc: Remove storing of PCI resources"), the DWC driver was setting up the last memory resource rather than the first memory resource. This doesn't matter for most platforms which only have 1 memory resource, but it broke Tegra194 which has a 2nd (prefetchable) memory region that requires an ATU entry. The first region on Tegra194 relies on the default 1:1 pass-thru of outbound transactions and doesn't need an ATU entry. Fixes: 0f71c60ffd26 ("PCI: dwc: Remove storing of PCI resources") Link: https://lore.kernel.org/r/20201026154852.221483-1-robh@kernel.org Reported-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Jingoo Han <jingoohan1@gmail.com> Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
* Merge branch 'remotes/lorenzo/pci/tegra'Bjorn Helgaas2020-10-211-15/+5
|\ | | | | | | | | | | | | | | | | | | | | - Drop return value checking for debugfs_create() calls (Greg Kroah-Hartman) - Convert debugfs "ports" file to use DEFINE_SEQ_ATTRIBUTE() (Liu Shixin) * remotes/lorenzo/pci/tegra: PCI: tegra: Convert to use DEFINE_SEQ_ATTRIBUTE macro PCI: tegra: No need to check return value of debugfs_create() functions
| * PCI: tegra: No need to check return value of debugfs_create() functionsGreg Kroah-Hartman2020-09-071-15/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Link: https://lore.kernel.org/r/20200818133739.463193-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Thierry Reding <treding@nvidia.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Rob Herring <robh@kernel.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Vidya Sagar <vidyas@nvidia.com> Cc: Andrew Murray <amurray@thegoodpenguin.co.uk> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-pci@vger.kernel.org Cc: linux-tegra@vger.kernel.org Cc: linux-kernel@vger.kernel.org
* | Merge branch 'remotes/lorenzo/pci/qcom'Bjorn Helgaas2020-10-211-0/+13
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | - Make sure PCIe is reset before init to work around QSDK U-Boot issue (Ansuel Smith) - Set iproc affinity mask on MSI interrupts (Mark Tomlinson) * remotes/lorenzo/pci/qcom: PCI: qcom: Make sure PCIe is reset before init for rev 2.1.0
| * | PCI: qcom: Make sure PCIe is reset before init for rev 2.1.0Ansuel Smith2020-09-071-0/+13
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | Qsdk U-Boot can incorrectly leave the PCIe interface in an undefined state if bootm command is used instead of bootipq. This is caused by the not deinit of PCIe when bootm is called. Reset the PCIe before init anyway to fix this U-Boot bug. Link: https://lore.kernel.org/r/20200901124955.137-1-ansuelsmth@gmail.com Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver") Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: stable@vger.kernel.org # v4.19+
* | Merge branch 'remotes/lorenzo/pci/meson'Bjorn Helgaas2020-10-212-2/+9
|\ \ | | | | | | | | | | | | | | | | | | | | | - Add pci-meson module support and enable by default on ARCH_MESON (Kevin Hilman) * remotes/lorenzo/pci/meson: PCI: meson: Build as module by default
| * | PCI: meson: Build as module by defaultKevin Hilman2020-10-052-2/+9
| |/ | | | | | | | | | | | | | | | | | | Enable pci-meson to build as a module whenever ARCH_MESON is enabled. Link: https://lore.kernel.org/r/20200918181251.32423-1-khilman@baylibre.com Signed-off-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Cc: Yue Wang <yue.wang@amlogic.com>
* | Merge branch 'remotes/lorenzo/pci/kirin'Bjorn Helgaas2020-10-211-1/+5
|\ \ | | | | | | | | | | | | | | | | | | - Return -EPROBE_DEFER in case the gpio isn't ready (Bean Huo) * remotes/lorenzo/pci/kirin: PCI: kirin: Return -EPROBE_DEFER in case the gpio isn't ready
| * | PCI: kirin: Return -EPROBE_DEFER in case the gpio isn't readyBean Huo2020-09-281-1/+5
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PCI host bridge driver can be probed before the gpiochip it requires, so, of_get_named_gpio() can return -EPROBE_DEFER. Current code lets the kirin_pcie_probe() directly return -ENODEV, which results in the PCI host controller driver probe failure; with this error code the PCI host controller driver will not be probed again when the gpiochip driver is loaded. Fix the above issue by letting kirin_pcie_probe() return -EPROBE_DEFER in such a case. Link: https://lore.kernel.org/r/20200918123800.19983-1-huobean@gmail.com Signed-off-by: Bean Huo <beanhuo@micron.com> [lorenzo.pieralisi@arm.com: commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
* | Merge branch 'remotes/lorenzo/pci/imx6'Bjorn Helgaas2020-10-211-23/+18
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | - Use "fallthrough" pseudo-keyword (Gustavo A. R. Silva) - Drop redundant error messages after devm_clk_get() (Anson Huang) * remotes/lorenzo/pci/imx6: PCI: imx6: Do not output error message when devm_clk_get() failed with -EPROBE_DEFER PCI: imx6: Use fallthrough pseudo-keyword
| * | PCI: imx6: Do not output error message when devm_clk_get() failed with ↵Anson Huang2020-09-071-20/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | -EPROBE_DEFER When devm_clk_get() returns -EPROBE_DEFER, i.MX6 PCI driver should NOT print error message, use dev_err_probe() to handle it. Link: https://lore.kernel.org/r/1597109364-4739-1-git-send-email-Anson.Huang@nxp.com Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
| * | PCI: imx6: Use fallthrough pseudo-keywordGustavo A. R. Silva2020-09-071-3/+3
| |/ | | | | | | | | | | | | | | | | | | | | | | Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Link: https://lore.kernel.org/r/20200722031903.GA3711@embeddedor Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
* | PCI: dwc: Add link up check in dw_child_pcie_ops.map_bus()Hou Zhiqiang2020-10-201-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | NXP Layerscape (ls1028a, ls2088a), dra7xxx and imx6 platforms are either programmed or statically configured to forward the error triggered by a link-down state (eg no connected endpoint device) on the system bus for PCI configuration transactions; these errors are reported as an SError at system level, which is fatal. Enumerating a PCI tree when the PCIe link is down is not sensible either, so even if the link-up check is racy (link can go down after map_bus() is called) add a link-up check in map_bus() to prevent issuing configuration transactions when the link is down. SError report: SError Interrupt on CPU2, code 0xbf000002 -- SError CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.9.0-rc5-next-20200914-00001-gf965d3ec86fa #67 Hardware name: LS1046A RDB Board (DT) pstate: 20000085 (nzCv daIf -PAN -UAO BTYPE=--) pc : pci_generic_config_read+0x3c/0xe0 lr : pci_generic_config_read+0x24/0xe0 sp : ffff80001003b7b0 x29: ffff80001003b7b0 x28: ffff80001003ba74 x27: ffff000971d96800 x26: ffff00096e77e0a8 x25: ffff80001003b874 x24: ffff80001003b924 x23: 0000000000000004 x22: 0000000000000000 x21: 0000000000000000 x20: ffff80001003b874 x19: 0000000000000004 x18: ffffffffffffffff x17: 00000000000000c0 x16: fffffe0025981840 x15: ffffb94c75b69948 x14: 62203a383634203a x13: 666e6f635f726568 x12: 202c31203d207265 x11: 626d756e3e2d7375 x10: 656877202c307830 x9 : 203d206e66766564 x8 : 0000000000000908 x7 : 0000000000000908 x6 : ffff800010900000 x5 : ffff00096e77e080 x4 : 0000000000000000 x3 : 0000000000000003 x2 : 84fa3440ff7e7000 x1 : 0000000000000000 x0 : ffff800010034000 Kernel panic - not syncing: Asynchronous SError Interrupt CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.9.0-rc5-next-20200914-00001-gf965d3ec86fa #67 Hardware name: LS1046A RDB Board (DT) Call trace: dump_backtrace+0x0/0x1c0 show_stack+0x18/0x28 dump_stack+0xd8/0x134 panic+0x180/0x398 add_taint+0x0/0xb0 arm64_serror_panic+0x78/0x88 do_serror+0x68/0x180 el1_error+0x84/0x100 pci_generic_config_read+0x3c/0xe0 dw_pcie_rd_other_conf+0x78/0x110 pci_bus_read_config_dword+0x88/0xe8 pci_bus_generic_read_dev_vendor_id+0x30/0x1b0 pci_bus_read_dev_vendor_id+0x4c/0x78 pci_scan_single_device+0x80/0x100 Link: https://lore.kernel.org/r/20200916054130.8685-1-Zhiqiang.Hou@nxp.com Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> [lorenzo.pieralisi@arm.com: rewrote the commit log, remove Fixes tag] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
* | PCI: dwc: Fix MSI page leakage in suspend/resumeJisheng Zhang2020-10-133-17/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, dw_pcie_msi_init() allocates and maps page for msi, then program the PCIE_MSI_ADDR_LO and PCIE_MSI_ADDR_HI. The Root Complex may lose power during suspend-to-RAM, so when we resume, we want to redo the latter but not the former. If designware based driver (for example, pcie-tegra194.c) calls dw_pcie_msi_init() in resume path, the msi page will be leaked. As pointed out by Rob and Ard, there's no need to allocate a page for the MSI address, we could use an address in the driver data. To avoid map the MSI msg again during resume, we move the map MSI msg from dw_pcie_msi_init() to dw_pcie_host_init(). Suggested-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20201009155505.5a580ef5@xhacker.debian Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org>
* | PCI: dwc: Skip PCIE_MSI_INTR0* programming if MSI is disabledJisheng Zhang2020-10-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | If MSI is disabled, there's no need to program PCIE_MSI_INTR0_MASK and PCIE_MSI_INTR0_ENABLE registers. Link: https://lore.kernel.org/r/20201009155436.27e67238@xhacker.debian Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
* | PCI: keystone: Remove iATU register mappingKunihiko Hayashi2020-10-131-16/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | After applying "PCI: dwc: Add common iATU register support", there is no need to set own iATU in the Keystone driver itself. Suggested-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/1601444167-11316-5-git-send-email-hayashi.kunihiko@socionext.com Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Cc: Murali Karicheri <m-karicheri2@ti.com> Cc: Jingoo Han <jingoohan1@gmail.com> Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
* | PCI: dwc: Add common iATU register supportKunihiko Hayashi2020-10-131-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This gets iATU register area from reg property that has reg-names "atu". In Synopsys DWC version 4.80 or later, since iATU register area is separated from core register area, this area is necessary to get from DT independently. Suggested-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/1601444167-11316-4-git-send-email-hayashi.kunihiko@socionext.com Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Cc: Murali Karicheri <m-karicheri2@ti.com> Cc: Jingoo Han <jingoohan1@gmail.com> Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
* | PCI: dwc: Fix 'cast truncates bits from constant value'Gustavo Pimentel2020-09-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes warning given by executing "make C=2 drivers/pci/" Sparse output: CHECK drivers/pci/controller/dwc/pcie-designware.c drivers/pci/controller/dwc/pcie-designware.c:432:52: warning: cast truncates bits from constant value (ffffffff7fffffff becomes 7fffffff) Link: https://lore.kernel.org/r/7ea7f7d342f97c758949a17b870012f52ce5b3f5.1600767645.git.gustavo.pimentel@synopsys.com Reported-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Joao Pinto <jpinto@synopsys.com>
* | PCI: layerscape: Add EP mode support for ls1088a and ls2088aXiaowei Bao2020-09-211-19/+53
| | | | | | | | | | | | | | | | | | | | | | | | Add PCIe EP mode support for ls1088a and ls2088a, there are some difference between LS1 and LS2 platform, so refactor the code of the EP driver. Link: https://lore.kernel.org/r/20200918080024.13639-10-Zhiqiang.Hou@nxp.com Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org>
* | PCI: layerscape: Modify the MSIX to the doorbell modeXiaowei Bao2020-09-211-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | dw_pcie_ep_raise_msix_irq was never called in the exisitng driver before, because the ls1046a platform don't support the MSIX feature and msix_capable was always set to false. Now that add the ls1088a platform with MSIX support, use the doorbell method to support the MSIX feature. Link: https://lore.kernel.org/r/20200918080024.13639-9-Zhiqiang.Hou@nxp.com Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com>
* | PCI: layerscape: Modify the way of getting capability with different PEXXiaowei Bao2020-09-211-8/+23
| | | | | | | | | | | | | | | | | | | | | | | | The different PCIe controller in one board may be have different capability of MSI or MSIX, so change the way of getting the MSI capability, make it more flexible. Link: https://lore.kernel.org/r/20200918080024.13639-8-Zhiqiang.Hou@nxp.com Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org>
* | PCI: layerscape: Fix some format issue of the codeXiaowei Bao2020-09-211-2/+2
| | | | | | | | | | | | | | | | | | | | Fix some format issue of the code in EP driver. Link: https://lore.kernel.org/r/20200918080024.13639-7-Zhiqiang.Hou@nxp.com Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com>
* | PCI: designware-ep: Modify MSI and MSIX CAP way of findingXiaowei Bao2020-09-212-21/+118
| | | | | | | | | | | | | | | | | | | | | | | | Each PF of EP device should have its own MSI or MSIX capabitily struct, so create a dw_pcie_ep_func struct and move the msi_cap and msix_cap to this struct from dw_pcie_ep, and manage the PFs via a list. Link: https://lore.kernel.org/r/20200918080024.13639-5-Zhiqiang.Hou@nxp.com Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
* | PCI: designware-ep: Move the function of getting MSI capability forwardXiaowei Bao2020-09-211-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | Move the function of getting MSI capability to the front of init function, because the init function of the EP platform driver will use the return value by the function of getting MSI capability. Link: https://lore.kernel.org/r/20200918080024.13639-4-Zhiqiang.Hou@nxp.com Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com>
* | PCI: designware-ep: Add the doorbell mode of MSI-X in EP modeXiaowei Bao2020-09-212-0/+31
| | | | | | | | | | | | | | | | | | | | Add the doorbell mode of MSI-X in DWC EP driver. Link: https://lore.kernel.org/r/20200918080024.13639-3-Zhiqiang.Hou@nxp.com Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com>
* | PCI: designware-ep: Add multiple PFs support for DWCXiaowei Bao2020-09-213-59/+143
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add multiple PFs support for DWC, due to different PF have different config space, we use func_conf_select callback function to access the different PF's config space, the different chip company need to implement this callback function when use the DWC IP core and intend to support multiple PFs feature. Link: https://lore.kernel.org/r/20200918080024.13639-2-Zhiqiang.Hou@nxp.com Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
* | PCI: dwc: Use DBI accessorsRob Herring2020-09-102-10/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert the remaining cases of register accesses using dbi_base rather than dw_pcie_(read|write)[bwl]_dbi accessors. Link: https://lore.kernel.org/r/20200821035420.380495-41-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Pratyush Anand <pratyush.anand@gmail.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: linux-tegra@vger.kernel.org
* | PCI: dwc: Move N_FTS setup to common setupRob Herring2020-09-105-85/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Designware controller has common registers to set number of fast training sequence ordered sets. The Artpec6, Intel, and Tegra driver initialize these register fields. Let's move the initialization to the common setup code and drivers just have to provide the value. There's a slight change in that the common clock mode N_FTS field is now initialized. Previously only the Intel driver set this. It's not clear from the code if common clock mode is used in the Artpec6 or Tegra driver. It depends on the DWC configuration. Given the field is not initialized while the others are, it seems unlikely common clock mode is used. Link: https://lore.kernel.org/r/20200821035420.380495-40-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Jingoo Han <jingoohan1@gmail.com> Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: linux-tegra@vger.kernel.org
* | PCI: dwc/intel-gw: Drop unused max_widthRob Herring2020-09-101-4/+0
| | | | | | | | | | | | | | | | | | | | | | 'max_width' is read, but never used, so let's remove it. Link: https://lore.kernel.org/r/20200821035420.380495-39-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Dilip Kota <eswara.kota@linux.intel.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com>
* | PCI: dwc/intel-gw: Move getting PCI_CAP_ID_EXP offset to intel_pcie_link_setup()Rob Herring2020-09-101-14/+1
| | | | | | | | | | | | | | | | | | | | | | | | The PCI_CAP_ID_EXP offset is only needed by intel_pcie_link_setup(), so let's retrieve it there and avoid storing the offset. Link: https://lore.kernel.org/r/20200821035420.380495-38-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Dilip Kota <eswara.kota@linux.intel.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com>
* | PCI: dwc/intel-gw: Drop unnecessary checking of DT 'device_type' propertyRob Herring2020-09-101-6/+0
| | | | | | | | | | | | | | | | | | | | | | | | A driver doesn't need to check for DT 'device_type' property, so let's remove the check. Link: https://lore.kernel.org/r/20200821035420.380495-37-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Dilip Kota <eswara.kota@linux.intel.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com>
* | PCI: dwc: Set PORT_LINK_DLL_LINK_EN in common setup codeRob Herring2020-09-102-4/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Intel driver is the only one to set PORT_LINK_DLL_LINK_EN. The default value is set and it seems pretty certain that enabling link initialization is always required. Maybe it could just be dropped from the Intel driver, but lets move setting it into the common code to be sure. Link: https://lore.kernel.org/r/20200821035420.380495-36-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Dilip Kota <eswara.kota@linux.intel.com> Cc: Jingoo Han <jingoohan1@gmail.com> Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com>
* | PCI: dwc: Centralize link gen settingRob Herring2020-09-1011-151/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | keystone would force gen2 if no DT property. Now it relies on the PCI_EXP_LNKCAP value. Link: https://lore.kernel.org/r/20200821035420.380495-35-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Richard Zhu <hongxing.zhu@nxp.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Murali Karicheri <m-karicheri2@ti.com> Cc: Jingoo Han <jingoohan1@gmail.com> Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Pratyush Anand <pratyush.anand@gmail.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: linux-omap@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-arm-msm@vger.kernel.org Cc: linux-tegra@vger.kernel.org
* | PCI: dwc: Make ATU accessors privateRob Herring2020-09-082-18/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | The ATU registers are only accessed in pcie-designware.c and can be private to it. Link: https://lore.kernel.org/r/20200821035420.380495-34-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Jingoo Han <jingoohan1@gmail.com> Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com>
* | PCI: dwc: Remove read_dbi2 codeRob Herring2020-09-083-36/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The DBI2 appears to be write-only and there's no read accesses in the code anyways, so let's remove all the read_dbi2 related code. Link: https://lore.kernel.org/r/20200821035420.380495-33-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Murali Karicheri <m-karicheri2@ti.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Jingoo Han <jingoohan1@gmail.com> Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
* | PCI: dwc/tegra: Use common Designware port logic register definitionsRob Herring2020-09-082-34/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Tegra driver has its own defines for common Designware Port Logic registers. Convert it to use the standard register definitions. Link: https://lore.kernel.org/r/20200821035420.380495-32-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Jingoo Han <jingoohan1@gmail.com> Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: linux-tegra@vger.kernel.org
* | PCI: dwc: Remove hardcoded PCI_CAP_ID_EXP offsetRob Herring2020-09-083-12/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While the Designware controller appears to hard code the PCI_CAP_ID_EXP capability register at 0x70, there's no need to hard code this in the driver as it is discoverable. Link: https://lore.kernel.org/r/20200821035420.380495-31-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Murali Karicheri <m-karicheri2@ti.com> Cc: Pratyush Anand <pratyush.anand@gmail.com> Cc: linux-omap@vger.kernel.org
* | PCI: dwc/qcom: Use common PCI register definitionsRob Herring2020-09-081-10/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The QCom driver has its own defines for common PCI config space registers. It also hard codes the capability register offsets which are discoverable. Convert it to use the standard register definitions. Link: https://lore.kernel.org/r/20200821035420.380495-30-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: linux-arm-msm@vger.kernel.org
* | PCI: dwc/imx6: Use common PCI register definitionsRob Herring2020-09-081-23/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The i.MX6 driver has its own defines for common PCI config space registers. It also hard codes the capability register offsets which are discoverable. Convert it to use the standard register definitions. Link: https://lore.kernel.org/r/20200821035420.380495-29-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Richard Zhu <hongxing.zhu@nxp.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com>
* | PCI: dwc/meson: Rework PCI config and DW port logic register accessesRob Herring2020-09-081-51/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The meson 'elbi' registers are just the Designware 'dbi' space and all the registers accessed are either standard PCI config space or DWC port logic registers. Convert the accesses to use the common defines and register accessors. Link: https://lore.kernel.org/r/20200821035420.380495-28-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Yue Wang <yue.wang@Amlogic.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Jingoo Han <jingoohan1@gmail.com> Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: linux-amlogic@lists.infradead.org
* | PCI: dwc/meson: Drop unnecessary RC config space initializationRob Herring2020-09-081-20/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The common Designware init already initializes the RC PCI_COMMAND, BAR0 and BAR1 registers. The only difference here is the common code sets SERR. If clearing SERR is what's desired, then the Meson driver should do that instead. Link: https://lore.kernel.org/r/20200821035420.380495-27-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Yue Wang <yue.wang@Amlogic.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Kevin Hilman <khilman@baylibre.com> Cc: linux-amlogic@lists.infradead.org
* | PCI: dwc/meson: Drop the duplicate number of lanes setupRob Herring2020-09-081-28/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The meson lanes initialization is the same DWC port logic registers as in dw_pcie_setup(). We just need to initialize 'num_lanes' to 1 to do the same init. dw_pcie_setup_rc() sets the PORT_LOGIC_SPEED_CHANGE bit, so setting it can be dropped. Link: https://lore.kernel.org/r/20200821035420.380495-26-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Yue Wang <yue.wang@Amlogic.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: linux-amlogic@lists.infradead.org
* | PCI: dwc: Ensure FAST_LINK_MODE is clearedRob Herring2020-09-082-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | "Fast Link Mode" is a simulation environment speed up setting which should never be set and the default is not set. However some Amlogic platforms have it set (by firmware presumably). See commit 87dccf09323f ("PCI: amlogic: meson: Don't use FAST_LINK_MODE to set up link") for more information. Let's clear it in core DWC code so we can drop some vendor specific code. Link: https://lore.kernel.org/r/20200821035420.380495-25-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Jingoo Han <jingoohan1@gmail.com> Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-06-26 10:57:58 +0000