aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-shmobile/board-ap4evb.c
Commit message (Collapse)AuthorAgeFilesLines
* ARM: shmobile: Remove AP4EVB board supportMagnus Damm2013-06-171-1310/+0
| | | | | | | | | | | Remove board support for the sh7372 based AP4EVB board The sh7372 SoC support code is still kept around since it is in use by the Mackerel board which is basically a more recent board where the design is based on AP4EVB. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
* ARM: shmobile: ap4evb: Register pinctrl mapping for USBHSLaurent Pinchart2013-06-041-8/+7
| | | | | | | Replace the GPIO-based USBHS pinmux configuration by a pinctrl mapping. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
* ARM: shmobile: ap4evb: Register pinctrl mapping for TSC2007Laurent Pinchart2013-06-041-3/+8
| | | | | | | | Replace the GPIO-based TSC2007 pinmux configuration by a pinctrl mapping. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
* ARM: shmobile: ap4evb: Simplify tsc2007 pen state read functionLaurent Pinchart2013-06-041-11/+2
| | | | | | | | | The pen state is retrieved by reading the state of a pin used as an IRQ. There's no need to reconfigure the pin as a pure GPIO, as the IRQ pin state can be read. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
* ARM: shmobile: ap4evb: Register pinctrl mapping for SMSC911xLaurent Pinchart2013-06-041-4/+5
| | | | | | | | Replace the GPIO-based SMSC911x pinmux configuration by a pinctrl mapping. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
* ARM: shmobile: ap4evb: Register pinctrl mapping for SCIFLaurent Pinchart2013-06-041-4/+3
| | | | | | | Replace the GPIO-based SCIF pinmux configuration by a pinctrl mapping. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
* ARM: shmobile: ap4evb: Register pinctrl mapping for LCDLaurent Pinchart2013-06-041-22/+7
| | | | | | | Replace the GPIO-based LCD pinmux configuration by a pinctrl mapping. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
* ARM: shmobile: ap4evb: Register pinctrl mapping for KEYSCLaurent Pinchart2013-06-041-12/+5
| | | | | | | Replace the GPIO-based KEYSC pinmux configuration by a pinctrl mapping. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
* ARM: shmobile: ap4evb: Register pinctrl mapping for HDMILaurent Pinchart2013-06-041-4/+3
| | | | | | | Replace the GPIO-based HDMI pinmux configuration by a pinctrl mapping. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
* ARM: shmobile: ap4evb: Register pinctrl mapping for FSILaurent Pinchart2013-06-041-7/+12
| | | | | | | Replace the GPIO-based FSI pinmux configuration by a pinctrl mapping. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
* ARM: shmobile: ap4evb: Register pinctrl mapping for CEULaurent Pinchart2013-06-041-2/+3
| | | | | | | Replace the GPIO-based CEU pinmux configuration by a pinctrl mapping. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
* ARM: shmobile: ap4evb: Register pinctrl mappings for SDHI and MMCIFLaurent Pinchart2013-03-151-30/+25
| | | | | | | Replace the GPIO-based SDHI and MMCIF pinmux configuration by pinctrl mappings Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
* ARM: shmobile: ap4-evb: Replace GPIO_PORTx enum with GPIO port numbersLaurent Pinchart2013-03-151-18/+18
| | | | | | | | | The PFC GPIO API implementation moved to using port numbers. Replace all GPIO_PORTx enum usage with the corresponding port number. The GPIO_PORTx enum values are identical to the port number on this platform. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
* Merge tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds2013-02-211-24/+13
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull ARM SoC board specific changes from Arnd Bergmann: "These updates are all for board specific code, including - defconfig updates for shmobile, davinci, bcm2835, imx, omap and tegra - SD/MMC and I2C support on bcm2835 (Raspberry PI) - minor updates for PXA - shmobile updates to GPIO usage in board files - More things in OMAP board files are moved over to device tree probing - Better support for audio devices on some OMAP platforms" * tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (55 commits) ARM: imx_v4_v5_defconfig: Add VPU support ARM: imx: configs: enable netfilter support ARM: OMAP2+: Fix twl section warnings related to omap_twl4030_audio_init ARM: OMAP2+: omap2plus_defconfig: enable omap1 rtc RX-51: Register twl4030-madc device RX-51: Add leds lp5523 names from Maemo 5 2.6.28 kernel ARM: OMAP2+: AM33XX: omap2plus_defconfig: Add support for few drivers ARM: OMAP1: nokia770: enable CBUS/Retu ARM: OMAP2+: omap2plus_defconfig: enable CMA allocator ARM: OMAP2+: omap2plus_defconfig: enable TFP410 chip support ARM: OMAP3: igep0020: simplify GPIO LEDs dependencies ARM: OMAP2+: craneboard: support the TPS65910 PMU ARM: OMAP2+: craneboard: support NAND device ARM: OMAP3: cm-t3517: add MMC support ARM: OMAP2+: Remove apollon board support ARM: shmobile: armadillo800eva: set clock rates before timer init ARM: tegra: defconfig updates ARM: shmobile: mackerel: Use gpio_request_one() ARM: shmobile: kzm9g: Use gpio_request_one() ARM: shmobile: bonito: Use gpio_request_one() ...
| * ARM: shmobile: ap4evb: Use gpio_request_one()Laurent Pinchart2013-01-281-24/+9
| | | | | | | | | | | | | | | | | | Replace occurences of gpio_request() and gpio_direction_*() by calls to gpio_request_one(). Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
| * ARM: shmobile: add sample amixer settings for ap4evbKuninori Morimoto2013-01-251-0/+4
| | | | | | | | | | | | | | | | FSI2A-AK4643 needs amixer setting to use it. This patch adds quick setting guide Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
* | Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds2013-02-211-1/+1
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull ARM SoC cleanups from Arnd Bergmann: "A large number of cleanups, all over the platforms. This is dominated largely by the Samsung platforms (s3c, s5p, exynos) and a few of the others moving code out of arch/arm into more appropriate subsystems. The clocksource and irqchip drivers are now abstracted to the point where platforms that are already cleaned up do not need to even specify the driver they use, it can all get configured from the device tree as we do for normal device drivers. The clocksource changes basically touch every single platform in the process. We further clean up the use of platform specific header files here, with the goal of turning more of the platforms over to being "multiplatform" enabled, which implies that they cannot expose their headers to architecture independent code any more. It is expected that no functional changes are part of the cleanup. The overall reduction in total code lines is mostly the result of removing broken and obsolete code." * tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (133 commits) ARM: mvebu: correct gated clock documentation ARM: kirkwood: add missing include for nsa310 ARM: exynos: move exynos4210-combiner to drivers/irqchip mfd: db8500-prcmu: update resource passing drivers/db8500-cpufreq: delete dangling include ARM: at91: remove NEOCORE 926 board sunxi: Cleanup the reset code and add meaningful registers defines ARM: S3C24XX: header mach/regs-mem.h local ARM: S3C24XX: header mach/regs-power.h local ARM: S3C24XX: header mach/regs-s3c2412-mem.h local ARM: S3C24XX: Remove plat-s3c24xx directory in arch/arm/ ARM: S3C24XX: transform s3c2443 subirqs into new structure ARM: S3C24XX: modify s3c2443 irq init to initialize all irqs ARM: S3C24XX: move s3c2443 irq code to irq.c ARM: S3C24XX: transform s3c2416 irqs into new structure ARM: S3C24XX: modify s3c2416 irq init to initialize all irqs ARM: S3C24XX: move s3c2416 irq init to common irq code ARM: S3C24XX: Modify s3c_irq_wake to use the hwirq property ARM: S3C24XX: Move irq syscore-ops to irq-pm clocksource: always define CLOCKSOURCE_OF_DECLARE ...
| * | ARM: delete struct sys_timerStephen Warren2012-12-241-1/+1
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that the only field in struct sys_timer is .init, delete the struct, and replace the machine descriptor .timer field with the initialization function itself. This will enable moving timer drivers into drivers/clocksource without having to place a public prototype of each struct sys_timer object into include/linux; the intent is to create a single of_clocksource_init() function that determines which timer driver to initialize by scanning the device dtree, much like the proposed irqchip_init() at: http://www.spinics.net/lists/arm-kernel/msg203686.html Includes mach-omap2 fixes from Igor Grinberg. Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Stephen Warren <swarren@nvidia.com>
* | ASoC: simple-card: add asoc_simple_dai for initializingKuninori Morimoto2013-01-141-18/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current simple-card driver calls asoc_simple_card_dai_init() if platform had a asoc_simple_card_dai_init pointer. And, this initialization function works only when platform has an applicable initial value for each dai settings. And basically, almost all sound card requires certain initialization. This means that almost all platform has initialization settings, and driver do nothing if it doesn't have settings. And additionally, current simple-card supports sysclk settings but it was only for codec. In order to abolish deviation between cpu and codec, and in order to simplify processing, this patch adds asoc_simple_dai, and removed pointless struct asoc_simple_dai_init_info which was trigger of calling asoc_simple_card_dai_init(). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | ASoC: fsi: remove SH_FSI_xxx_INV flagsKuninori Morimoto2012-12-241-8/+3
|/ | | | | | | | | | | | | 3449f5fab8c51e37a8a48bc2516588c615373191 (ASoC: fsi: add SND_SOC_DAIFMT_INV_xxx support) added clock inversion support via snd_soc_dai_set_fmt(). Thus, this patch removed SH_FSI_xxx_INV and fsi_get_info() from fsi driver, and modified platform settings to use new style. Then, it cleaned up meaningless settings from platform. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* Merge tag 'fbdev-for-3.8' of git://gitorious.org/linux-omap-dss2/linuxLinus Torvalds2012-12-151-3/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull fbdev changes from Tomi Valkeinen: "OMAPDSS changes, including: - use dynanic debug prints - OMAP platform dependency removals - Creation of compat-layer, helping us to improve omapdrm - Misc cleanups, aiming to make omadss more in line with the upcoming common display framework Exynos DP changes for the 3.8 merge window: - Device Tree support for Samsung Exynos DP - SW Link training is cleaned up. - HPD interrupt is supported. Samsung Framebuffer changes for the 3.8 merge window: - The bit definitions of header file are updated. - Some minor typos are fixed. - Some minor bugs of s3c_fb_check_var() are fixed. FB related changes for SH Mobile, Freescale DIU Add support for the Solomon SSD1307 OLED Controller" * tag 'fbdev-for-3.8' of git://gitorious.org/linux-omap-dss2/linux: (191 commits) OMAPDSS: fix TV-out issue with DSI PLL Revert "OMAPFB: simplify locking" OMAPFB: remove silly loop in fb2display() OMAPFB: fix error handling in omapfb_find_best_mode() OMAPFB: use devm_kzalloc to allocate omapfb2_device OMAPDSS: DISPC: remove dispc fck uses OMAPDSS: DISPC: get dss clock rate from dss driver drivers/video/console/softcursor.c: remove redundant NULL check before kfree() drivers/video: add support for the Solomon SSD1307 OLED Controller OMAPDSS: use omapdss_compat_init() in other drivers OMAPDSS: export dispc functions OMAPDSS: export dss_feat functions OMAPDSS: export dss_mgr_ops functions OMAPDSS: separate compat files in the Makefile OMAPDSS: move display sysfs init to compat layer OMAPDSS: DPI: use dispc's check_timings OMAPDSS: DISPC: add dispc_ovl_check() OMAPDSS: move irq handling to dispc-compat OMAPDSS: move omap_dispc_wait_for_irq_interruptible_timeout to dispc-compat.c OMAPDSS: move blocking mgr enable/disable to compat layer ... Conflicts: arch/arm/mach-davinci/devices-da8xx.c arch/arm/plat-omap/common.c drivers/media/platform/omap/omap_vout.c
| * ARM: mach-shmobile: Remove the unused sh_mipi_dsi_info lcd_chan fieldLaurent Pinchart2012-11-211-3/+0
| | | | | | | | | | Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Simon Horman <horms@verge.net.au>
| * ARM: mach-shmobile: Initiliaze the new sh_mipi_dsi_info channel fieldLaurent Pinchart2012-11-211-0/+1
| | | | | | | | | | Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Simon Horman <horms@verge.net.au>
* | ARM: shmobile: use FSI driver's audio clock on ap4evbKuninori Morimoto2012-11-081-138/+1
| | | | | | | | | | | | | | | | | | Current FSI driver can control audio clock without platform call-back functions This patch removed board-specific call-back/settings Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms@verge.net.au>
* | ARM: shmobile: sh7372: sh7372_fsidivX_clk become non-globalKuninori Morimoto2012-11-081-1/+1
|/ | | | | | | | | | | Not only sh7372 but also many Renesas chip has FSI-DIV clock, and we can share its sh_clk_ops. To support common FSI-DIV clock, sh7372_fsidivX_clk becomes non-global by this patch. This is preparation for FSI DT support. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms@verge.net.au>
* Merge tag 'pm-for-3.7-rc1' of ↵Linus Torvalds2012-10-021-9/+12
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael J Wysocki: - Improved system suspend/resume and runtime PM handling for the SH TMU, CMT and MTU2 clock event devices (also used by ARM/shmobile). - Generic PM domains framework extensions related to cpuidle support and domain objects lookup using names. - ARM/shmobile power management updates including improved support for the SH7372's A4S power domain containing the CPU core. - cpufreq changes related to AMD CPUs support from Matthew Garrett, Andre Przywara and Borislav Petkov. - cpu0 cpufreq driver from Shawn Guo. - cpufreq governor fixes related to the relaxing of limit from Michal Pecio. - OMAP cpufreq updates from Axel Lin and Richard Zhao. - cpuidle ladder governor fixes related to the disabling of states from Carsten Emde and me. - Runtime PM core updates related to the interactions with the system suspend core from Alan Stern and Kevin Hilman. - Wakeup sources modification allowing more helper functions to be called from interrupt context from John Stultz and additional diagnostic code from Todd Poynor. - System suspend error code path fix from Feng Hong. Fixed up conflicts in cpufreq/powernow-k8 that stemmed from the workqueue fixes conflicting fairly badly with the removal of support for hardware P-state chips. The changes were independent but somewhat intertwined. * tag 'pm-for-3.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (76 commits) Revert "PM QoS: Use spinlock in the per-device PM QoS constraints code" PM / Runtime: let rpm_resume() succeed if RPM_ACTIVE, even when disabled, v2 cpuidle: rename function name "__cpuidle_register_driver", v2 cpufreq: OMAP: Check IS_ERR() instead of NULL for omap_device_get_by_hwmod_name cpuidle: remove some empty lines PM: Prevent runtime suspend during system resume PM QoS: Use spinlock in the per-device PM QoS constraints code PM / Sleep: use resume event when call dpm_resume_early cpuidle / ACPI : move cpuidle_device field out of the acpi_processor_power structure ACPI / processor: remove pointless variable initialization ACPI / processor: remove unused function parameter cpufreq: OMAP: remove loops_per_jiffy recalculate for smp sections: fix section conflicts in drivers/cpufreq cpufreq: conservative: update frequency when limits are relaxed cpufreq / ondemand: update frequency when limits are relaxed properly __init-annotate pm_sysrq_init() cpufreq: Add a generic cpufreq-cpu0 driver PM / OPP: Initialize OPP table from device tree ARM: add cpufreq transiton notifier to adjust loops_per_jiffy for smp cpufreq: Remove support for hardware P-state chips from powernow-k8 ...
| * ARM: shmobile: Add A4S cpuidle state on sh7372Rafael J. Wysocki2012-09-041-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a "C5" cpuidle state to the SH7372 SoC connected to the A4S power domain in such a way that A4S may be turned off by cpuidle if all I/O devices in that domain have been suspended (or do not have attached drivers). This requires some reorganization of the initialization of SH7372 power management which affects the the boards based on it, Mackerel and AP4EVB. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Magnus Damm <damm@opensource.se>
| * ARM: shmobile: Rework adding devices to PM domains on AP4EVBRafael J. Wysocki2012-09-041-8/+11
| | | | | | | | | | | | | | | | | | | | | | Use the function rmobile_add_devices_to_domains() introduced previously for adding devices to PM domains during the AP4EVB initialization instead of a series of rmobile_add_device_to_domain*() calls. This also causes the default device PM QoS latencies to be used on that board in analogy with Mackerel. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Magnus Damm <damm@opensource.se>
| * ARM: shmobile: Use names of power domains for adding devices to themRafael J. Wysocki2012-09-041-8/+8
| | | | | | | | | | | | | | | | | | | | | | Make the power management code under arch/arm/mach-shmobile/ use names of power domains instead of pointers to domain objects for adding devices to the domains. This will allow us to put the domain objects into tables and register them all in one shot going forward. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Magnus Damm <damm@opensource.se>
* | Merge tag 'multiplatform' of ↵Linus Torvalds2012-10-011-0/+2
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM soc multiplatform enablement from Olof Johansson: "This is a pretty significant branch. It's the introduction of the first multiplatform support on ARM, and with this (and the later branch) merged, it is now possible to build one kernel that contains support for highbank, vexpress, mvebu, socfpga, and picoxcell. More platforms will be convered over in the next few releases. Two critical last things had to be done for this to be practical and possible: * Today each platform has its own include directory under mach-<mach>/include/mach/*, and traditionally that is where a lot of driver/platform shared definitions have gone, such as platform data structures. They now need to move out to a common location instead, and this branch moves a large number of those out to include/linux/platform_data. * Each platform used to list the device trees to compile for its boards in mach-<mach>/Makefile.boot. Both of the above changes will mean that there are some merge conflicts to come (and some to resolve here). It's a one-time move and once it settles in, we should be good for quite a while. Sorry for the overhead." Fix conflicts as per Olof. * tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (51 commits) ARM: add v7 multi-platform defconfig ARM: msm: Move core.h contents into common.h ARM: highbank: call highbank_pm_init from .init_machine ARM: dtb: move all dtb targets to common Makefile ARM: spear: move platform_data definitions ARM: samsung: move platform_data definitions ARM: orion: move platform_data definitions ARM: vexpress: convert to multi-platform ARM: initial multiplatform support ARM: mvebu: move armada-370-xp.h in mach dir ARM: vexpress: remove dependency on mach/* headers ARM: picoxcell: remove dependency on mach/* headers ARM: move all dtb targets out of Makefile.boot ARM: picoxcell: move debug macros to include/debug ARM: socfpga: move debug macros to include/debug ARM: mvebu: move debug macros to include/debug ARM: vexpress: move debug macros to include/debug ARM: highbank: move debug macros to include/debug ARM: move debug macros to common location ARM: make mach/gpio.h headers optional ...
| * | ARM: shmobile: move custom gpio functions to sh-gpio.hRob Herring2012-09-141-0/+2
| |/ | | | | | | | | | | | | | | | | | | Move custom shmobile gpio code to a sh-gpio.h to remove the dependency on mach/gpio.h. shmobile always uses gpiolib, so we can remove __GPIOLIB_COMPLEX define from mach/gpio.h. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Magnus Damm <magnus.damm@gmail.com>
* / ARM: shmobile: use __iomem pointers for MMIOArnd Bergmann2012-09-181-6/+6
|/ | | | | | | | | | | | | | | | ARM is moving to stricter checks on readl/write functions, so we need to use the correct types everywhere. This patch is a bit ugly for shmobile, which is the only platform that just uses integer literals all over the place, but I can't see a better way to do this. Acked-by: Simon Horman <horms@verge.net.au> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: linux-sh@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* Merge branch 'renesas-ap4evb' into renesas-boardRafael J. Wysocki2012-07-111-17/+31
|\ | | | | | | | | | | * renesas-ap4evb: ARM: mach-shmobile: add fixed voltage regulators to ap4evb ARM: shmobile: use common extra gpio functions on ap4evb
| * ARM: mach-shmobile: add fixed voltage regulators to ap4evbGuennadi Liakhovetski2012-06-301-0/+29
| | | | | | | | | | | | | | | | | | On ap4evb provide 1.8V and 3.3V supplies for its SD/MMC-card interfaces and a dummy regulator for the smsc911x driver. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
| * ARM: shmobile: use common extra gpio functions on ap4evbKuninori Morimoto2012-06-301-17/+2
| | | | | | | | | | | | | | | | | | | | | | | | This patch switch over to use common extra gpio method, and reduced a waste of code on SH-ARM. But these functions should be replaced by correct gpio function in the future. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
* | ARM: shmobile: ap4evb: switch to using pm-rmobile APIKuninori Morimoto2012-07-061-8/+8
|/ | | | | | | | This patch switches ap4evb platform to use pm-rmobile base common API. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
* Merge tag 'cleanup-initcall' of ↵Linus Torvalds2012-05-261-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull sweeping late_initcall cleanup for arm-soc from Olof Johansson: "This is a patch series from Shawn Guo that moves from individual late_initcalls() to using a member in the machine structure to invoke a platform's late initcalls. This cleanup is a step in the move towards multiplatform kernels since it would reduce the need to check for compatible platforms in each and every initcall." Fix up trivial conflicts in arch/arm/mach-{exynos/mach-universal_c210.c, imx/mach-cpuimx51.c, omap2/board-generic.c} due to changes nearby (and, in the case of cpuimx51.c the board support being deleted) * tag 'cleanup-initcall' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: ux500: use machine specific hook for late init ARM: tegra: use machine specific hook for late init ARM: shmobile: use machine specific hook for late init ARM: sa1100: use machine specific hook for late init ARM: s3c64xx: use machine specific hook for late init ARM: prima2: use machine specific hook for late init ARM: pnx4008: use machine specific hook for late init ARM: omap2: use machine specific hook for late init ARM: omap1: use machine specific hook for late init ARM: msm: use machine specific hook for late init ARM: imx: use machine specific hook for late init ARM: exynos: use machine specific hook for late init ARM: ep93xx: use machine specific hook for late init ARM: davinci: use machine specific hook for late init ARM: provide a late_initcall hook for platform initialization
| * ARM: shmobile: use machine specific hook for late initShawn Guo2012-05-081-0/+1
| | | | | | | | | | | | | | Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Magnus Damm <damm@opensource.se> Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl>
* | Merge tag 'sound-3.5' of ↵Linus Torvalds2012-05-231-4/+31
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "This is the first big chunk for 3.5 merges of sound stuff. There are a few big changes in different areas. First off, the streaming logic of USB-audio endpoints has been largely rewritten for the better support of "implicit feedback". If anything about USB got broken, this change has to be checked. For HD-audio, the resume procedure was changed; instead of delaying the resume of the hardware until the first use, now waking up immediately at resume. This is for buggy BIOS. For ASoC, dynamic PCM support and the improved support for digital links between off-SoC devices are major framework changes. Some highlights are below: * HD-audio - Avoid accesses of invalid pin-control bits that may stall the codec - V-ref setup cleanups - Fix the races in power-saving code - Fix the races in codec cache hashes and connection lists - Split some common codes for BIOS auto-parser to hda_auto_parser.c - Changed the PM resume code to wake up immediately for buggy BIOS - Creative SoundCore3D support - Add Conexant CX20751/2/3/4 codec support * ASoC - Dynamic PCM support, allowing support for SoCs with internal routing through components with tight sequencing and formatting constraints within their internal paths or where there are multiple components connected with CPU managed DMA controllers inside the SoC. - Greatly improved support for direct digital links between off-SoC devices, providing a much simpler way of connecting things like digital basebands to CODECs. - Much more fine grained and robust locking, cleaning up some of the confusion that crept in with multi-component. - CPU support for nVidia Tegra 30 I2S and audio hub controllers and ST-Ericsson MSP I2S controolers - New CODEC drivers for Cirrus CS42L52, LAPIS Semiconductor ML26124, Texas Instruments LM49453. - Some regmap changes needed by the Tegra I2S driver. - mc13783 audio support. * Misc - Rewrite with module_pci_driver() - Xonar DGX support for snd-oxygen - Improvement of packet handling in snd-firewire driver - New USB-endpoint streaming logic - Enhanced M-audio FTU quirks and relevant cleanups - Increment the support of OSS devices to 256 - snd-aloop accuracy improvement There are a few more pending changes for 3.5, but they will be sent slightly later as partly depending on the changes of DRM." Fix up conflicts in regmap (due to duplicate patches, with some further updates then having already come in from the regmap tree). Also some fairly trivial context conflicts in the imx and mcx soc drivers. * tag 'sound-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (280 commits) ALSA: snd-usb: fix stream info output in /proc ALSA: pcm - Add proper state checks to snd_pcm_drain() ALSA: sh: Fix up namespace collision in sh_dac_audio. ALSA: hda/realtek - Fix unused variable compile warning ASoC: sh: fsi: enable chip specific data transfer mode ASoC: sh: fsi: call fsi_hw_startup/shutdown from fsi_dai_trigger() ASoC: sh: fsi: use same format for IN/OUT ASoC: sh: fsi: add fsi_version() and removed meaningless version check ASoC: sh: fsi: use register field macro name on IN/OUT_DMAC ASoC: tegra: Add machine driver for WM8753 codec ALSA: hda - Fix possible races of accesses to connection list array ASoC: OMAP: HDMI: Introduce codec ARM: mx31_3ds: Add sound support ASoC: imx-mc13783 cleanup mx31moboard: Add sound support ASoC: mc13783 codec cleanups ASoC: add imx-mc13783 sound support ASoC: Add mc13783 codec mfd: mc13xxx: add codec platform data ASoC: don't flip master of DT-instantiated DAI links ...
| * | ASoC: sh: fsi: use simple-card instead of fsi-hdmiKuninori Morimoto2012-04-131-1/+19
| | | | | | | | | | | | | | | | | | | | | | | | This patch uses simple-card driver instead of fsi-hdmi on each board. This patch removes fsi-hdmi driver which is no longer needed Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * | ASoC: sh: fsi: use simple-card instead of fsi-ak4642Kuninori Morimoto2012-04-131-3/+12
| |/ | | | | | | | | | | | | | | | | | | This patch uses simple-card driver instead of fsi-ak4642 on each board. To select AK4642 driver, each boards select it on Kconfig. This patch removes fsi-ak4642 driver which is no longer needed Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* / ARM: mach-shmobile: sh7372 CEU supports up to 8188x8188 imagesGuennadi Liakhovetski2012-05-121-0/+2
|/ | | | | | | Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Reviewed-by: Simon Horman <horms@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
* Merge tag 'soc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds2012-03-281-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull "ARM: More SoC support updates" from Olof Johansson: "This branch contains a handful of updates of SoC base code that had dependencies on other external trees that have now been merged: * Support for the new EXYNOS5250 SoC from Samsung * SMP and power domain support for Tegra3 from NVIDIA * ux500 updates for exporting SoC information through sysfs" Fix up trivial merge conflicts as per Olof. * tag 'soc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (30 commits) ARM: mach-shmobile: ap4evb: Reserve DMA memory for the frame buffer ARM: EXYNOS: Fix compilation error with mach-exynos4-dt board ARM: dts: add initial dts file for EXYNOS5250, SMDK5250 ARM: EXYNOS: add support device tree enabled board file for EXYNOS5 ARM: EXYNOS: add support ARCH_EXYNOS5 for EXYNOS5 SoCs ARM: EXYNOS: add support get_core_count() for EXYNOS5250 ARM: EXYNOS: support EINT for EXYNOS4 and EXYNOS5 ARM: EXYNOS: add interrupt definitions for EXYNOS5250 ARM: EXYNOS: add support for EXYNOS5250 SoC ARM: EXYNOS: add support uart for EXYNOS4 and EXYNOS5 ARM: EXYNOS: add initial setup-i2c0 for EXYNOS5 ARM: EXYNOS: add clock part for EXYNOS5250 SoC ARM: EXYNOS: use exynos_init_uarts() instead of exynos4_init_uarts() ARM: EXYNOS: to declare static for mach-exynos/common.c ARM: EXYNOS: Add clkdev lookup entry for lcd clock ARM: dt: Explicitly configure all serial ports on Tegra Cardhu ARM: tegra: support for secondary cores on Tegra30 ARM: tegra: support for Tegra30 CPU powerdomains ARM: tegra: add support for Tegra30 powerdomains ARM: tegra: export tegra_powergate_is_powered() ...
| * Merge branch 'rmobile-fixes-for-linus' of git://github.com/pmundt/linux-sh ↵Arnd Bergmann2012-03-241-0/+1
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | into renesas/soc Conflicts: arch/arm/mach-shmobile/board-ap4evb.c This moves the addition of init_consistent_dma_size() from the board files into the common sh7372_map_io() functions where all the other contents of the board specific map_io calls have gone. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| | * ARM: mach-shmobile: ap4evb: Reserve DMA memory for the frame bufferKuninori Morimoto2012-03-151-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | ap4evb board needs the same fix as 1740d3448012475f6b63172631c60cbcd1994a81 (ARM: mach-shmobile: mackerel: Reserve DMA memory for the frame buffer) Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* | | Merge tag 'timer' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds2012-03-271-38/+6
|\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull "ARM: timer cleanup work" from Arnd Bergmann: "These are split out from the generic soc and driver updates because there was a lot of conflicting work by multiple people. Marc Zyngier worked on simplifying the "localtimer" interfaces, and some of the platforms are touching the same code as they move to device tree based booting. Signed-off-by: Arnd Bergmann <arnd@arndb.de>" * tag 'timer' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (61 commits) ARM: tegra: select USB_ULPI if USB is selected arm/tegra: pcie: fix return value of function ARM: ux500: fix compilation after local timer rework ARM: shmobile: remove additional __io() macro use ARM: local timers: make the runtime registration interface mandatory ARM: local timers: convert MSM to runtime registration interface ARM: local timers: convert exynos to runtime registration interface ARM: smp_twd: remove old local timer interface ARM: imx6q: convert to twd_local_timer_register() interface ARM: highbank: convert to twd_local_timer_register() interface ARM: ux500: convert to twd_local_timer_register() interface ARM: shmobile: convert to twd_local_timer_register() interface ARM: tegra: convert to twd_local_timer_register() interface ARM: plat-versatile: convert to twd_local_timer_register() interface ARM: OMAP4: convert to twd_local_timer_register() interface ARM: smp_twd: add device tree support ARM: smp_twd: add runtime registration support ARM: local timers: introduce a new registration interface ARM: smp_twd: make local_timer_stop a symbol instead of a #define ARM: mach-shmobile: default to no earlytimer ...
| * | Merge branch 'renesas/fixes' into renesas/socArnd Bergmann2012-03-151-1/+1
| |\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The fixes branch was merged into mainline just after v3.3-rc7, I'm merging it into this branch to fix up a nontrivial merge conflict. Unfortunately this means that we are now based on a commit between -rc releases, which we normally try to avoid. Conflicts: arch/arm/mach-shmobile/board-mackerel.c Resolution suggested by Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| * | ARM: mach-shmobile: sh7372, AP4EVB and Mackerel timer reworkMagnus Damm2012-03-121-12/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move the SoC specific timer code from AP4EVB and Mackerel to sh7372 setup code. This makes is possible to share the SoC specific timer code across boards and it also removes the need for a board specific timer structure. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
| * | ARM: mach-shmobile: Move sh7372 AP4EVB external clk setupMagnus Damm2012-03-121-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move the board specific external clock setting for sh7372 AP4EVB from machine_desc->sys_timer->init() to machine_desc->init_machine(). This is ground work for shmobile timer code consolidation. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
| * | ARM: mach-shmobile: sh7372 map_io and init_early updateMagnus Damm2012-03-121-23/+2
| | | | | | | | | | | | | | | | | | | | | | | | Update the sh7372 SoC and the AP4EVB and Mackerel boards to make use of the functions sh7372_map_io() and sh7372_add_early_devices(). Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
generated by cgit v1.2.3 (git 2.25.1) at 2025-02-08 01:14:15 +0000