aboutsummaryrefslogtreecommitdiffstats
path: root/include/linux
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux')
-rw-r--r--include/linux/bcma/bcma_driver_chipcommon.h18
-rw-r--r--include/linux/ieee80211.h59
-rw-r--r--include/linux/nfc.h2
-rw-r--r--include/linux/nl80211.h32
4 files changed, 89 insertions, 22 deletions
diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h
index 6083725dd22e..a7ae33d06f24 100644
--- a/include/linux/bcma/bcma_driver_chipcommon.h
+++ b/include/linux/bcma/bcma_driver_chipcommon.h
@@ -283,6 +283,22 @@
#define BCMA_CC_PPL_PCHI_OFF 5
#define BCMA_CC_PPL_PCHI_MASK 0x0000003f
+/* BCM4331 ChipControl numbers. */
+#define BCMA_CHIPCTL_4331_BT_COEXIST BIT(0) /* 0 disable */
+#define BCMA_CHIPCTL_4331_SECI BIT(1) /* 0 SECI is disabled (JATG functional) */
+#define BCMA_CHIPCTL_4331_EXT_LNA BIT(2) /* 0 disable */
+#define BCMA_CHIPCTL_4331_SPROM_GPIO13_15 BIT(3) /* sprom/gpio13-15 mux */
+#define BCMA_CHIPCTL_4331_EXTPA_EN BIT(4) /* 0 ext pa disable, 1 ext pa enabled */
+#define BCMA_CHIPCTL_4331_GPIOCLK_ON_SPROMCS BIT(5) /* set drive out GPIO_CLK on sprom_cs pin */
+#define BCMA_CHIPCTL_4331_PCIE_MDIO_ON_SPROMCS BIT(6) /* use sprom_cs pin as PCIE mdio interface */
+#define BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5 BIT(7) /* aband extpa will be at gpio2/5 and sprom_dout */
+#define BCMA_CHIPCTL_4331_OVR_PIPEAUXCLKEN BIT(8) /* override core control on pipe_AuxClkEnable */
+#define BCMA_CHIPCTL_4331_OVR_PIPEAUXPWRDOWN BIT(9) /* override core control on pipe_AuxPowerDown */
+#define BCMA_CHIPCTL_4331_PCIE_AUXCLKEN BIT(10) /* pcie_auxclkenable */
+#define BCMA_CHIPCTL_4331_PCIE_PIPE_PLLDOWN BIT(11) /* pcie_pipe_pllpowerdown */
+#define BCMA_CHIPCTL_4331_BT_SHD0_ON_GPIO4 BIT(16) /* enable bt_shd0 at gpio4 */
+#define BCMA_CHIPCTL_4331_BT_SHD1_ON_GPIO5 BIT(17) /* enable bt_shd1 at gpio5 */
+
/* Data for the PMU, if available.
* Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU)
*/
@@ -342,6 +358,8 @@ extern void bcma_core_chipcommon_init(struct bcma_drv_cc *cc);
extern void bcma_chipco_suspend(struct bcma_drv_cc *cc);
extern void bcma_chipco_resume(struct bcma_drv_cc *cc);
+void bcma_chipco_bcm4331_ext_pa_lines_ctl(struct bcma_drv_cc *cc, bool enable);
+
extern void bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc,
u32 ticks);
diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index 54c878960872..37f95f2e10f9 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -629,9 +629,14 @@ struct ieee80211_rann_ie {
u8 rann_ttl;
u8 rann_addr[6];
u32 rann_seq;
+ u32 rann_interval;
u32 rann_metric;
} __attribute__ ((packed));
+enum ieee80211_rann_flags {
+ RANN_FLAG_IS_GATE = 1 << 0,
+};
+
#define WLAN_SA_QUERY_TR_ID_LEN 2
struct ieee80211_mgmt {
@@ -736,19 +741,10 @@ struct ieee80211_mgmt {
__le16 params;
__le16 reason_code;
} __attribute__((packed)) delba;
- struct{
+ struct {
u8 action_code;
- /* capab_info for open and confirm,
- * reason for close
- */
- __le16 aux;
- /* Followed in plink_confirm by status
- * code, AID and supported rates,
- * and directly by supported rates in
- * plink_open and plink_close
- */
u8 variable[0];
- } __attribute__((packed)) plink_action;
+ } __attribute__((packed)) self_prot;
struct{
u8 action_code;
u8 variable[0];
@@ -816,9 +812,11 @@ struct ieee80211_bar {
} __attribute__((packed));
/* 802.11 BAR control masks */
-#define IEEE80211_BAR_CTRL_ACK_POLICY_NORMAL 0x0000
-#define IEEE80211_BAR_CTRL_CBMTID_COMPRESSED_BA 0x0004
-
+#define IEEE80211_BAR_CTRL_ACK_POLICY_NORMAL 0x0000
+#define IEEE80211_BAR_CTRL_MULTI_TID 0x0002
+#define IEEE80211_BAR_CTRL_CBMTID_COMPRESSED_BA 0x0004
+#define IEEE80211_BAR_CTRL_TID_INFO_MASK 0xf000
+#define IEEE80211_BAR_CTRL_TID_INFO_SHIFT 12
#define IEEE80211_HT_MCS_MASK_LEN 10
@@ -1194,11 +1192,6 @@ enum ieee80211_eid {
WLAN_EID_MESH_ID = 114,
WLAN_EID_LINK_METRIC_REPORT = 115,
WLAN_EID_CONGESTION_NOTIFICATION = 116,
- /* Note that the Peer Link IE has been replaced with the similar
- * Peer Management IE. We will keep the former definition until mesh
- * code is changed to comply with latest 802.11s drafts.
- */
- WLAN_EID_PEER_LINK = 55, /* no longer in 802.11s drafts */
WLAN_EID_PEER_MGMT = 117,
WLAN_EID_CHAN_SWITCH_PARAM = 118,
WLAN_EID_MESH_AWAKE_WINDOW = 119,
@@ -1281,9 +1274,6 @@ enum ieee80211_category {
WLAN_CATEGORY_MULTIHOP_ACTION = 14,
WLAN_CATEGORY_SELF_PROTECTED = 15,
WLAN_CATEGORY_WMM = 17,
- /* TODO: remove MESH_PATH_SEL after mesh is updated
- * to current 802.11s draft */
- WLAN_CATEGORY_MESH_PATH_SEL = 32,
WLAN_CATEGORY_VENDOR_SPECIFIC_PROTECTED = 126,
WLAN_CATEGORY_VENDOR_SPECIFIC = 127,
};
@@ -1309,6 +1299,31 @@ enum ieee80211_ht_actioncode {
WLAN_HT_ACTION_ASEL_IDX_FEEDBACK = 7,
};
+/* Self Protected Action codes */
+enum ieee80211_self_protected_actioncode {
+ WLAN_SP_RESERVED = 0,
+ WLAN_SP_MESH_PEERING_OPEN = 1,
+ WLAN_SP_MESH_PEERING_CONFIRM = 2,
+ WLAN_SP_MESH_PEERING_CLOSE = 3,
+ WLAN_SP_MGK_INFORM = 4,
+ WLAN_SP_MGK_ACK = 5,
+};
+
+/* Mesh action codes */
+enum ieee80211_mesh_actioncode {
+ WLAN_MESH_ACTION_LINK_METRIC_REPORT,
+ WLAN_MESH_ACTION_HWMP_PATH_SELECTION,
+ WLAN_MESH_ACTION_GATE_ANNOUNCEMENT,
+ WLAN_MESH_ACTION_CONGESTION_CONTROL_NOTIFICATION,
+ WLAN_MESH_ACTION_MCCA_SETUP_REQUEST,
+ WLAN_MESH_ACTION_MCCA_SETUP_REPLY,
+ WLAN_MESH_ACTION_MCCA_ADVERTISEMENT_REQUEST,
+ WLAN_MESH_ACTION_MCCA_ADVERTISEMENT,
+ WLAN_MESH_ACTION_MCCA_TEARDOWN,
+ WLAN_MESH_ACTION_TBTT_ADJUSTMENT_REQUEST,
+ WLAN_MESH_ACTION_TBTT_ADJUSTMENT_RESPONSE,
+};
+
/* Security key length */
enum ieee80211_key_len {
WLAN_KEY_LEN_WEP40 = 5,
diff --git a/include/linux/nfc.h b/include/linux/nfc.h
index 330a4c5db588..c525e0b5876b 100644
--- a/include/linux/nfc.h
+++ b/include/linux/nfc.h
@@ -123,4 +123,6 @@ struct sockaddr_nfc {
#define NFC_SOCKPROTO_RAW 0
#define NFC_SOCKPROTO_MAX 1
+#define NFC_HEADER_SIZE 1
+
#endif /*__LINUX_NFC_H */
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index 89dec16b4697..0343504082a8 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -1042,6 +1042,9 @@ enum nl80211_commands {
* (Re)Association Response frames when the driver (or firmware) replies to
* (Re)Association Request frames.
*
+ * @NL80211_ATTR_STA_WME: Nested attribute containing the wme configuration
+ * of the station, see &enum nl80211_sta_wme_attr.
+ *
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
*/
@@ -1252,6 +1255,8 @@ enum nl80211_attrs {
NL80211_ATTR_IE_PROBE_RESP,
NL80211_ATTR_IE_ASSOC_RESP,
+ NL80211_ATTR_STA_WME,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
@@ -1861,6 +1866,13 @@ enum nl80211_mntr_flags {
* @NL80211_MESHCONF_ELEMENT_TTL: specifies the value of TTL field set at a
* source mesh point for path selection elements.
*
+ * @NL80211_MESHCONF_HWMP_RANN_INTERVAL: The interval of time (in TUs) between
+ * root announcements are transmitted.
+ *
+ * @NL80211_MESHCONF_GATE_ANNOUNCEMENTS: Advertise that this mesh station has
+ * access to a broader network beyond the MBSS. This is done via Root
+ * Announcement frames.
+ *
* @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute
*
* @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use
@@ -1882,6 +1894,8 @@ enum nl80211_meshconf_params {
NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME,
NL80211_MESHCONF_HWMP_ROOTMODE,
NL80211_MESHCONF_ELEMENT_TTL,
+ NL80211_MESHCONF_HWMP_RANN_INTERVAL,
+ NL80211_MESHCONF_GATE_ANNOUNCEMENTS,
/* keep last */
__NL80211_MESHCONF_ATTR_AFTER_LAST,
@@ -2473,4 +2487,22 @@ enum nl80211_hidden_ssid {
NL80211_HIDDEN_SSID_ZERO_CONTENTS
};
+/**
+ * enum nl80211_sta_wme_attr - station WME attributes
+ * @__NL80211_STA_WME_INVALID: invalid number for nested attribute
+ * @NL80211_STA_WME_QUEUES: bitmap of uapsd queues.
+ * @NL80211_STA_WME_MAX_SP: max service period.
+ * @__NL80211_STA_WME_AFTER_LAST: internal
+ * @NL80211_STA_WME_MAX: highest station WME attribute
+ */
+enum nl80211_sta_wme_attr {
+ __NL80211_STA_WME_INVALID,
+ NL80211_STA_WME_UAPSD_QUEUES,
+ NL80211_STA_WME_MAX_SP,
+
+ /* keep last */
+ __NL80211_STA_WME_AFTER_LAST,
+ NL80211_STA_WME_MAX = __NL80211_STA_WME_AFTER_LAST - 1
+};
+
#endif /* __LINUX_NL80211_H */
generated by cgit v1.2.3 (git 2.25.1) at 2025-07-12 16:35:06 +0000