diff options
Diffstat (limited to 'drivers/net/wireless/ath/ath10k/mac.c')
| -rw-r--r-- | drivers/net/wireless/ath/ath10k/mac.c | 75 |
1 files changed, 67 insertions, 8 deletions
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index d1b7edba5e49..9977829a6ec4 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -569,10 +569,14 @@ chan_to_phymode(const struct cfg80211_chan_def *chandef) case NL80211_CHAN_WIDTH_80: phymode = MODE_11AC_VHT80; break; + case NL80211_CHAN_WIDTH_160: + phymode = MODE_11AC_VHT160; + break; + case NL80211_CHAN_WIDTH_80P80: + phymode = MODE_11AC_VHT80_80; + break; case NL80211_CHAN_WIDTH_5: case NL80211_CHAN_WIDTH_10: - case NL80211_CHAN_WIDTH_80P80: - case NL80211_CHAN_WIDTH_160: phymode = MODE_UNKNOWN; break; } @@ -971,6 +975,7 @@ static int ath10k_monitor_vdev_start(struct ath10k *ar, int vdev_id) arg.vdev_id = vdev_id; arg.channel.freq = channel->center_freq; arg.channel.band_center_freq1 = chandef->center_freq1; + arg.channel.band_center_freq2 = chandef->center_freq2; /* TODO setup this dynamically, what in case we don't have any vifs? */ @@ -1417,6 +1422,7 @@ static int ath10k_vdev_start_restart(struct ath10k_vif *arvif, arg.channel.freq = chandef->chan->center_freq; arg.channel.band_center_freq1 = chandef->center_freq1; + arg.channel.band_center_freq2 = chandef->center_freq2; arg.channel.mode = chan_to_phymode(chandef); arg.channel.min_power = 0; @@ -2480,6 +2486,9 @@ static void ath10k_peer_assoc_h_vht(struct ath10k *ar, if (sta->bandwidth == IEEE80211_STA_RX_BW_80) arg->peer_flags |= ar->wmi.peer_flags->bw80; + if (sta->bandwidth == IEEE80211_STA_RX_BW_160) + arg->peer_flags |= ar->wmi.peer_flags->bw160; + arg->peer_vht_rates.rx_max_rate = __le16_to_cpu(vht_cap->vht_mcs.rx_highest); arg->peer_vht_rates.rx_mcs_set = @@ -2533,6 +2542,33 @@ static bool ath10k_mac_sta_has_ofdm_only(struct ieee80211_sta *sta) ATH10K_MAC_FIRST_OFDM_RATE_IDX; } +static enum wmi_phy_mode ath10k_mac_get_phymode_vht(struct ath10k *ar, + struct ieee80211_sta *sta) +{ + if (sta->bandwidth == IEEE80211_STA_RX_BW_160) { + switch (sta->vht_cap.cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK) { + case IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ: + return MODE_11AC_VHT160; + case IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ: + return MODE_11AC_VHT80_80; + default: + /* not sure if this is a valid case? */ + return MODE_11AC_VHT160; + } + } + + if (sta->bandwidth == IEEE80211_STA_RX_BW_80) + return MODE_11AC_VHT80; + + if (sta->bandwidth == IEEE80211_STA_RX_BW_40) + return MODE_11AC_VHT40; + + if (sta->bandwidth == IEEE80211_STA_RX_BW_20) + return MODE_11AC_VHT20; + + return MODE_UNKNOWN; +} + static void ath10k_peer_assoc_h_phymode(struct ath10k *ar, struct ieee80211_vif *vif, struct ieee80211_sta *sta, @@ -2579,12 +2615,7 @@ static void ath10k_peer_assoc_h_phymode(struct ath10k *ar, */ if (sta->vht_cap.vht_supported && !ath10k_peer_assoc_h_vht_masked(vht_mcs_mask)) { - if (sta->bandwidth == IEEE80211_STA_RX_BW_80) - phymode = MODE_11AC_VHT80; - else if (sta->bandwidth == IEEE80211_STA_RX_BW_40) - phymode = MODE_11AC_VHT40; - else if (sta->bandwidth == IEEE80211_STA_RX_BW_20) - phymode = MODE_11AC_VHT20; + phymode = ath10k_mac_get_phymode_vht(ar, sta); } else if (sta->ht_cap.ht_supported && !ath10k_peer_assoc_h_ht_masked(ht_mcs_mask)) { if (sta->bandwidth >= IEEE80211_STA_RX_BW_40) @@ -3774,6 +3805,9 @@ struct ieee80211_txq *ath10k_mac_txq_lookup(struct ath10k *ar, if (!peer) return NULL; + if (peer->removed) + return NULL; + if (peer->sta) return peer->sta->txq[tid]; else if (peer->vif) @@ -4311,6 +4345,13 @@ static struct ieee80211_sta_vht_cap ath10k_create_vht_cap(struct ath10k *ar) vht_cap.cap |= val; } + /* Currently the firmware seems to be buggy, don't enable 80+80 + * mode until that's resolved. + */ + if ((ar->vht_cap_info & IEEE80211_VHT_CAP_SHORT_GI_160) && + !(ar->vht_cap_info & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ)) + vht_cap.cap |= IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ; + mcs_map = 0; for (i = 0; i < 8; i++) { if ((i < ar->num_rf_chains) && (ar->cfg_tx_chainmask & BIT(i))) @@ -6969,6 +7010,9 @@ static void ath10k_sta_rc_update(struct ieee80211_hw *hw, bw = WMI_PEER_CHWIDTH_80MHZ; break; case IEEE80211_STA_RX_BW_160: + bw = WMI_PEER_CHWIDTH_160MHZ; + break; + default: ath10k_warn(ar, "Invalid bandwidth %d in rc update for %pM\n", sta->bandwidth, sta->addr); bw = WMI_PEER_CHWIDTH_20MHZ; @@ -7476,6 +7520,20 @@ ath10k_mac_op_switch_vif_chanctx(struct ieee80211_hw *hw, return 0; } +static void ath10k_mac_op_sta_pre_rcu_remove(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_sta *sta) +{ + struct ath10k *ar; + struct ath10k_peer *peer; + + ar = hw->priv; + + list_for_each_entry(peer, &ar->peers, list) + if (peer->sta == sta) + peer->removed = true; +} + static const struct ieee80211_ops ath10k_ops = { .tx = ath10k_mac_op_tx, .wake_tx_queue = ath10k_mac_op_wake_tx_queue, @@ -7516,6 +7574,7 @@ static const struct ieee80211_ops ath10k_ops = { .assign_vif_chanctx = ath10k_mac_op_assign_vif_chanctx, .unassign_vif_chanctx = ath10k_mac_op_unassign_vif_chanctx, .switch_vif_chanctx = ath10k_mac_op_switch_vif_chanctx, + .sta_pre_rcu_remove = ath10k_mac_op_sta_pre_rcu_remove, CFG80211_TESTMODE_CMD(ath10k_tm_cmd) |