diff options
Diffstat (limited to 'drivers/net/dsa/sja1105/sja1105_main.c')
| -rw-r--r-- | drivers/net/dsa/sja1105/sja1105_main.c | 17 |
1 files changed, 14 insertions, 3 deletions
diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c index 7cae3705c6f4..1ca54392a6c9 100644 --- a/drivers/net/dsa/sja1105/sja1105_main.c +++ b/drivers/net/dsa/sja1105/sja1105_main.c @@ -2922,13 +2922,13 @@ static int sja1105_setup(struct dsa_switch *ds) rc = sja1105_static_config_load(priv, ports); if (rc < 0) { dev_err(ds->dev, "Failed to load static config: %d\n", rc); - return rc; + goto out_ptp_clock_unregister; } /* Configure the CGU (PHY link modes and speeds) */ rc = sja1105_clocking_setup(priv); if (rc < 0) { dev_err(ds->dev, "Failed to configure MII clocking: %d\n", rc); - return rc; + goto out_static_config_free; } /* On SJA1105, VLAN filtering per se is always enabled in hardware. * The only thing we can do to disable it is lie about what the 802.1Q @@ -2949,7 +2949,7 @@ static int sja1105_setup(struct dsa_switch *ds) rc = sja1105_devlink_setup(ds); if (rc < 0) - return rc; + goto out_static_config_free; /* The DSA/switchdev model brings up switch ports in standalone mode by * default, and that means vlan_filtering is 0 since they're not under @@ -2958,6 +2958,17 @@ static int sja1105_setup(struct dsa_switch *ds) rtnl_lock(); rc = sja1105_setup_8021q_tagging(ds, true); rtnl_unlock(); + if (rc) + goto out_devlink_teardown; + + return 0; + +out_devlink_teardown: + sja1105_devlink_teardown(ds); +out_ptp_clock_unregister: + sja1105_ptp_clock_unregister(ds); +out_static_config_free: + sja1105_static_config_free(&priv->static_config); return rc; } |