Merge branch 'master' of ssh://infradead/~/public_git/wireless-next into for-davem

3 files changed, 58 insertions, 3 deletions

diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index 37f95f2e10f9..72f3933938c0 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -130,6 +130,8 @@
 #define IEEE80211_QOS_CTL_ACK_POLICY_BLOCKACK	0x0060
 /* A-MSDU 802.11n */
 #define IEEE80211_QOS_CTL_A_MSDU_PRESENT	0x0080
+/* Mesh Control 802.11s */
+#define IEEE80211_QOS_CTL_MESH_CONTROL_PRESENT  0x0100
 
 /* U-APSD queue for WMM IEs sent by AP */
 #define IEEE80211_WMM_IE_AP_QOSINFO_UAPSD	(1<<7)
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index 0343504082a8..f17307590e61 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -769,6 +769,8 @@ enum nl80211_commands {
  *	that can be added to a scan request
  * @NL80211_ATTR_MAX_SCHED_SCAN_IE_LEN: maximum length of information
  *	elements that can be added to a scheduled scan request
+ * @NL80211_ATTR_MAX_MATCH_SETS: maximum number of sets that can be
+ *	used with @NL80211_ATTR_SCHED_SCAN_MATCH, a wiphy attribute.
  *
  * @NL80211_ATTR_SCAN_FREQUENCIES: nested attribute with frequencies (in MHz)
  * @NL80211_ATTR_SCAN_SSIDS: nested attribute with SSIDs, leave out for passive
@@ -1011,6 +1013,24 @@ enum nl80211_commands {
 
  * @NL80211_ATTR_SCHED_SCAN_INTERVAL: Interval between scheduled scan
  *	cycles, in msecs.
+
+ * @NL80211_ATTR_SCHED_SCAN_MATCH: Nested attribute with one or more
+ *	sets of attributes to match during scheduled scans.  Only BSSs
+ *	that match any of the sets will be reported.  These are
+ *	pass-thru filter rules.
+ *	For a match to succeed, the BSS must match all attributes of a
+ *	set.  Since not every hardware supports matching all types of
+ *	attributes, there is no guarantee that the reported BSSs are
+ *	fully complying with the match sets and userspace needs to be
+ *	able to ignore them by itself.
+ *	Thus, the implementation is somewhat hardware-dependent, but
+ *	this is only an optimization and the userspace application
+ *	needs to handle all the non-filtered results anyway.
+ *	If the match attributes don't make sense when combined with
+ *	the values passed in @NL80211_ATTR_SCAN_SSIDS (eg. if an SSID
+ *	is included in the probe request, but the match attributes
+ *	will never let it go through), -EINVAL may be returned.
+ *	If ommited, no filtering is done.
  *
  * @NL80211_ATTR_INTERFACE_COMBINATIONS: Nested attribute listing the supported
  *	interface combinations. In each nested item, it contains attributes
@@ -1044,6 +1064,11 @@ enum nl80211_commands {
  *
  * @NL80211_ATTR_STA_WME: Nested attribute containing the wme configuration
  *	of the station, see &enum nl80211_sta_wme_attr.
+ * @NL80211_ATTR_SUPPORT_AP_UAPSD: the device supports uapsd when working
+ *	as AP.
+ *
+ * @NL80211_ATTR_ROAM_SUPPORT: Indicates whether the firmware is capable of
+ *	roaming to another AP in the same ESS if the signal lever is low.
  *
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
@@ -1256,6 +1281,12 @@ enum nl80211_attrs {
 	NL80211_ATTR_IE_ASSOC_RESP,
 
 	NL80211_ATTR_STA_WME,
+	NL80211_ATTR_SUPPORT_AP_UAPSD,
+
+	NL80211_ATTR_ROAM_SUPPORT,
+
+	NL80211_ATTR_SCHED_SCAN_MATCH,
+	NL80211_ATTR_MAX_MATCH_SETS,
 
 	/* add attributes here, update the policy in nl80211.c */
 
@@ -1716,6 +1747,26 @@ enum nl80211_reg_rule_attr {
 };
 
 /**
+ * enum nl80211_sched_scan_match_attr - scheduled scan match attributes
+ * @__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID: attribute number 0 is reserved
+ * @NL80211_SCHED_SCAN_MATCH_ATTR_SSID: SSID to be used for matching,
+ * only report BSS with matching SSID.
+ * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter
+ *	attribute number currently defined
+ * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use
+ */
+enum nl80211_sched_scan_match_attr {
+	__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID,
+
+	NL80211_ATTR_SCHED_SCAN_MATCH_SSID,
+
+	/* keep last */
+	__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST,
+	NL80211_SCHED_SCAN_MATCH_ATTR_MAX =
+		__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST - 1
+};
+
+/**
  * enum nl80211_reg_rule_flags - regulatory rule flags
  *
  * @NL80211_RRF_NO_OFDM: OFDM modulation not allowed
@@ -2490,8 +2541,10 @@ enum nl80211_hidden_ssid {
 /**
  * enum nl80211_sta_wme_attr - station WME attributes
  * @__NL80211_STA_WME_INVALID: invalid number for nested attribute
- * @NL80211_STA_WME_QUEUES: bitmap of uapsd queues.
- * @NL80211_STA_WME_MAX_SP: max service period.
+ * @NL80211_STA_WME_UAPSD_QUEUES: bitmap of uapsd queues. the format
+ *	is the same as the AC bitmap in the QoS info field.
+ * @NL80211_STA_WME_MAX_SP: max service period. the format is the same
+ *	as the MAX_SP field in the QoS info field (but already shifted down).
  * @__NL80211_STA_WME_AFTER_LAST: internal
  * @NL80211_STA_WME_MAX: highest station WME attribute
  */
diff --git a/include/linux/ssb/ssb.h b/include/linux/ssb/ssb.h
index 8623217f84d0..f10ed7b4a714 100644
--- a/include/linux/ssb/ssb.h
+++ b/include/linux/ssb/ssb.h
@@ -25,7 +25,7 @@ struct ssb_sprom {
 	u8 et1phyaddr;		/* MII address for enet1 */
 	u8 et0mdcport;		/* MDIO for enet0 */
 	u8 et1mdcport;		/* MDIO for enet1 */
-	u8 board_rev;		/* Board revision number from SPROM. */
+	u16 board_rev;		/* Board revision number from SPROM. */
 	u8 country_code;	/* Country Code */
 	u16 leddc_on_time;	/* LED Powersave Duty Cycle On Count */
 	u16 leddc_off_time;	/* LED Powersave Duty Cycle Off Count */