Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux

Pull thermal management updates from Zhang Rui:
 "We have a lot of SOC changes and a few thermal core fixes this time.

  The biggest change is about exynos thermal driver restructure.  The
  patch set adds TMU (Thermal management Unit) driver support for
  exynos5440 platform.  There are 3 instances of the TMU controllers so
  necessary cleanup/re-structure is done to handle multiple thermal
  zone.

  The next biggest change is the introduction of the imx thermal driver.
  It adds the imx thermal support using Temperature Monitor (TEMPMON)
  block found on some Freescale i.MX SoCs.  The driver uses syscon
  regmap interface to access TEMPMON control registers and calibration
  data, and supports cpufreq as the cooling device.

  Highlights:

   - restructure exynos thermal driver.

   - introduce new imx thermal driver.

   - fix a bug in thermal core, which powers on the fans unexpectedly
     after resume from suspend"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (46 commits)
  drivers: thermal: add check when unregistering cpu cooling
  thermal: thermal_core: allow binding with limits on bind_params
  drivers: thermal: make usage of CONFIG_THERMAL_HWMON optional
  drivers: thermal: parent virtual hwmon with thermal zone
  thermal: hwmon: move hwmon support to single file
  thermal: exynos: Clean up non-DT remnants
  thermal: exynos: Fix potential NULL pointer dereference
  thermal: exynos: Fix typos in Kconfig
  thermal: ti-soc-thermal: Ensure to compute thermal trend
  thermal: ti-soc-thermal: Set the bandgap mask counter delay value
  thermal: ti-soc-thermal: Initialize counter_delay field for TI DRA752 sensors
  thermal: step_wise: return instance->target by default
  thermal: step_wise: cdev only needs update on a new target state
  Thermal/cpu_cooling: Return directly for the cpu out of allowed_cpus in the cpufreq_thermal_notifier()
  thermal: exynos_tmu: fix wrong error check for mapped memory
  thermal: imx: implement thermal alarm interrupt handling
  thermal: imx: dynamic passive and SoC specific critical trip points
  Documentation: thermal: Explain the exynos thermal driver model
  ARM: dts: thermal: exynos: Add documentation for Exynos SoC thermal bindings
  thermal: exynos: Support for TMU regulator defined at device tree
  ...

1 files changed, 21 insertions, 11 deletions

diff --git a/drivers/thermal/step_wise.c b/drivers/thermal/step_wise.c
index 4d4ddae1a991..d89e781b0a18 100644
--- a/drivers/thermal/step_wise.c
+++ b/drivers/thermal/step_wise.c
@@ -51,44 +51,51 @@ static unsigned long get_target_state(struct thermal_instance *instance,
 {
 	struct thermal_cooling_device *cdev = instance->cdev;
 	unsigned long cur_state;
+	unsigned long next_target;
 
+	/*
+	 * We keep this instance the way it is by default.
+	 * Otherwise, we use the current state of the
+	 * cdev in use to determine the next_target.
+	 */
 	cdev->ops->get_cur_state(cdev, &cur_state);
+	next_target = instance->target;
 
 	switch (trend) {
 	case THERMAL_TREND_RAISING:
 		if (throttle) {
-			cur_state = cur_state < instance->upper ?
+			next_target = cur_state < instance->upper ?
 				    (cur_state + 1) : instance->upper;
-			if (cur_state < instance->lower)
-				cur_state = instance->lower;
+			if (next_target < instance->lower)
+				next_target = instance->lower;
 		}
 		break;
 	case THERMAL_TREND_RAISE_FULL:
 		if (throttle)
-			cur_state = instance->upper;
+			next_target = instance->upper;
 		break;
 	case THERMAL_TREND_DROPPING:
 		if (cur_state == instance->lower) {
 			if (!throttle)
-				cur_state = -1;
+				next_target = THERMAL_NO_TARGET;
 		} else {
-			cur_state -= 1;
-			if (cur_state > instance->upper)
-				cur_state = instance->upper;
+			next_target = cur_state - 1;
+			if (next_target > instance->upper)
+				next_target = instance->upper;
 		}
 		break;
 	case THERMAL_TREND_DROP_FULL:
 		if (cur_state == instance->lower) {
 			if (!throttle)
-				cur_state = -1;
+				next_target = THERMAL_NO_TARGET;
 		} else
-			cur_state = instance->lower;
+			next_target = instance->lower;
 		break;
 	default:
 		break;
 	}
 
-	return cur_state;
+	return next_target;
 }
 
 static void update_passive_instance(struct thermal_zone_device *tz,
@@ -133,6 +140,9 @@ static void thermal_zone_trip_update(struct thermal_zone_device *tz, int trip)
 		old_target = instance->target;
 		instance->target = get_target_state(instance, trend, throttle);
 
+		if (old_target == instance->target)
+			continue;
+
 		/* Activate a passive thermal instance */
 		if (old_target == THERMAL_NO_TARGET &&
 			instance->target != THERMAL_NO_TARGET)