Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Merge conflict of mlx5 resolved using instructions in merge
commit 9566e650bf7fdf58384bb06df634f7531ca3a97e.

Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 10 insertions, 19 deletions

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 29ed5ec1ac27..1b27b5af3d55 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1025,10 +1025,15 @@ static void __pci_start_power_transition(struct pci_dev *dev, pci_power_t state)
 	if (state == PCI_D0) {
 		pci_platform_power_transition(dev, PCI_D0);
 		/*
-		 * Mandatory power management transition delays are
-		 * handled in the PCIe portdrv resume hooks.
+		 * Mandatory power management transition delays, see
+		 * PCI Express Base Specification Revision 2.0 Section
+		 * 6.6.1: Conventional Reset.  Do not delay for
+		 * devices powered on/off by corresponding bridge,
+		 * because have already delayed for the bridge.
 		 */
 		if (dev->runtime_d3cold) {
+			if (dev->d3cold_delay && !dev->imm_ready)
+				msleep(dev->d3cold_delay);
 			/*
 			 * When powering on a bridge from D3cold, the
 			 * whole hierarchy may be powered on into
@@ -4602,16 +4607,14 @@ static int pci_pm_reset(struct pci_dev *dev, int probe)
 
 	return pci_dev_wait(dev, "PM D3->D0", PCIE_RESET_READY_POLL_MS);
 }
-
 /**
- * pcie_wait_for_link_delay - Wait until link is active or inactive
+ * pcie_wait_for_link - Wait until link is active or inactive
  * @pdev: Bridge device
  * @active: waiting for active or inactive?
- * @delay: Delay to wait after link has become active (in ms)
  *
  * Use this to wait till link becomes active or inactive.
  */
-bool pcie_wait_for_link_delay(struct pci_dev *pdev, bool active, int delay)
+bool pcie_wait_for_link(struct pci_dev *pdev, bool active)
 {
 	int timeout = 1000;
 	bool ret;
@@ -4648,25 +4651,13 @@ bool pcie_wait_for_link_delay(struct pci_dev *pdev, bool active, int delay)
 		timeout -= 10;
 	}
 	if (active && ret)
-		msleep(delay);
+		msleep(100);
 	else if (ret != active)
 		pci_info(pdev, "Data Link Layer Link Active not %s in 1000 msec\n",
 			active ? "set" : "cleared");
 	return ret == active;
 }
 
-/**
- * pcie_wait_for_link - Wait until link is active or inactive
- * @pdev: Bridge device
- * @active: waiting for active or inactive?
- *
- * Use this to wait till link becomes active or inactive.
- */
-bool pcie_wait_for_link(struct pci_dev *pdev, bool active)
-{
-	return pcie_wait_for_link_delay(pdev, active, 100);
-}
-
 void pci_reset_secondary_bus(struct pci_dev *dev)
 {
 	u16 ctrl;