qtnfmac: introduce new FullMAC driver for Quantenna chipsets

This patch adds support for new FullMAC WiFi driver for Quantenna
QSR10G chipsets.

QSR10G (aka Pearl) is Quantenna's 8x8, 160M, 11ac offering.
QSR10G supports 2 simultaneous WMACs - one 5G and one 2G.
5G WMAC supports 160M, 8x8 configuration. FW supports
up to 8 concurrent virtual interfaces on each WMAC.

Patch introduces 2 new drivers:
- qtnfmac.ko for interfacing with kernel wireless core
- qtnfmac_pearl_pcie.ko for interfacing with hardware over PCIe interface

Signed-off-by: Dmitrii Lebed <dlebed@quantenna.com>
Signed-off-by: Sergei Maksimenko <smaksimenko@quantenna.com>
Signed-off-by: Sergey Matyukevich <smatyukevich@quantenna.com>
Signed-off-by: Bindu Therthala <btherthala@quantenna.com>
Signed-off-by: Huizhao Wang <hwang@quantenna.com>
Signed-off-by: Kamlesh Rath <krath@quantenna.com>
Signed-off-by: Avinash Patil <avinashp@quantenna.com>
Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

1 files changed, 901 insertions, 0 deletions

diff --git a/drivers/net/wireless/quantenna/qtnfmac/qlink.h b/drivers/net/wireless/quantenna/qtnfmac/qlink.h
new file mode 100644
index 000000000000..6eafc15e0065
--- /dev/null
+++ b/drivers/net/wireless/quantenna/qtnfmac/qlink.h
@@ -0,0 +1,901 @@
+/*
+ * Copyright (c) 2015-2016 Quantenna Communications, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef _QTN_QLINK_H_
+#define _QTN_QLINK_H_
+
+#include <linux/ieee80211.h>
+
+#define QLINK_PROTO_VER		3
+
+#define QLINK_MACID_RSVD		0xFF
+#define QLINK_VIFID_RSVD		0xFF
+
+/* Common QLINK protocol messages definitions.
+ */
+
+/**
+ * enum qlink_msg_type - QLINK message types
+ *
+ * Used to distinguish between message types of QLINK protocol.
+ *
+ * @QLINK_MSG_TYPE_CMD: Message is carrying data of a command sent from
+ *	driver to wireless hardware.
+ * @QLINK_MSG_TYPE_CMDRSP: Message is carrying data of a response to a command.
+ *	Sent from wireless HW to driver in reply to previously issued command.
+ * @QLINK_MSG_TYPE_EVENT: Data for an event originated in wireless hardware and
+ *	sent asynchronously to driver.
+ */
+enum qlink_msg_type {
+	QLINK_MSG_TYPE_CMD	= 1,
+	QLINK_MSG_TYPE_CMDRSP	= 2,
+	QLINK_MSG_TYPE_EVENT	= 3
+};
+
+/**
+ * struct qlink_msg_header - common QLINK protocol message header
+ *
+ * Portion of QLINK protocol header common for all message types.
+ *
+ * @type: Message type, one of &enum qlink_msg_type.
+ * @len: Total length of message including all headers.
+ */
+struct qlink_msg_header {
+	__le16 type;
+	__le16 len;
+} __packed;
+
+/* Generic definitions of data and information carried in QLINK messages
+ */
+
+enum qlink_hw_capab {
+	QLINK_HW_SUPPORTS_REG_UPDATE	= BIT(0),
+};
+
+enum qlink_phy_mode {
+	QLINK_PHYMODE_BGN	= BIT(0),
+	QLINK_PHYMODE_AN	= BIT(1),
+	QLINK_PHYMODE_AC	= BIT(2),
+};
+
+enum qlink_iface_type {
+	QLINK_IFTYPE_AP		= 1,
+	QLINK_IFTYPE_STATION	= 2,
+	QLINK_IFTYPE_ADHOC	= 3,
+	QLINK_IFTYPE_MONITOR	= 4,
+	QLINK_IFTYPE_WDS	= 5,
+};
+
+/**
+ * struct qlink_intf_info - information on virtual interface.
+ *
+ * Data describing a single virtual interface.
+ *
+ * @if_type: Mode of interface operation, one of &enum qlink_iface_type
+ * @flags: interface flagsmap.
+ * @mac_addr: MAC address of virtual interface.
+ */
+struct qlink_intf_info {
+	__le16 if_type;
+	__le16 flags;
+	u8 mac_addr[ETH_ALEN];
+	u8 rsvd[2];
+} __packed;
+
+enum qlink_sta_flags {
+	QLINK_STA_FLAG_INVALID		= 0,
+	QLINK_STA_FLAG_AUTHORIZED		= BIT(0),
+	QLINK_STA_FLAG_SHORT_PREAMBLE	= BIT(1),
+	QLINK_STA_FLAG_WME			= BIT(2),
+	QLINK_STA_FLAG_MFP			= BIT(3),
+	QLINK_STA_FLAG_AUTHENTICATED		= BIT(4),
+	QLINK_STA_FLAG_TDLS_PEER		= BIT(5),
+	QLINK_STA_FLAG_ASSOCIATED		= BIT(6),
+};
+
+enum qlink_channel_width {
+	QLINK_CHAN_WIDTH_5		= BIT(0),
+	QLINK_CHAN_WIDTH_10		= BIT(1),
+	QLINK_CHAN_WIDTH_20_NOHT	= BIT(2),
+	QLINK_CHAN_WIDTH_20		= BIT(3),
+	QLINK_CHAN_WIDTH_40		= BIT(4),
+	QLINK_CHAN_WIDTH_80		= BIT(5),
+	QLINK_CHAN_WIDTH_80P80		= BIT(6),
+	QLINK_CHAN_WIDTH_160		= BIT(7),
+};
+
+/* QLINK Command messages related definitions
+ */
+
+/**
+ * enum qlink_cmd_type - list of supported commands
+ *
+ * Commands are QLINK messages of type @QLINK_MSG_TYPE_CMD, sent by driver to
+ * wireless network device for processing. Device is expected to send back a
+ * reply message of type &QLINK_MSG_TYPE_CMDRSP, containing at least command
+ * execution status (one of &enum qlink_cmd_result) at least. Reply message
+ * may also contain data payload specific to the command type.
+ *
+ * @QLINK_CMD_CHANS_INFO_GET: for the specified MAC and specified band, get
+ *	number of operational channels and information on each of the channel.
+ *	This command is generic to a specified MAC, interface index must be set
+ *	to QLINK_VIFID_RSVD in command header.
+ */
+enum qlink_cmd_type {
+	QLINK_CMD_FW_INIT		= 0x0001,
+	QLINK_CMD_FW_DEINIT		= 0x0002,
+	QLINK_CMD_REGISTER_MGMT		= 0x0003,
+	QLINK_CMD_SEND_MGMT_FRAME	= 0x0004,
+	QLINK_CMD_MGMT_SET_APPIE	= 0x0005,
+	QLINK_CMD_PHY_PARAMS_GET	= 0x0011,
+	QLINK_CMD_PHY_PARAMS_SET	= 0x0012,
+	QLINK_CMD_GET_HW_INFO		= 0x0013,
+	QLINK_CMD_MAC_INFO		= 0x0014,
+	QLINK_CMD_ADD_INTF		= 0x0015,
+	QLINK_CMD_DEL_INTF		= 0x0016,
+	QLINK_CMD_CHANGE_INTF		= 0x0017,
+	QLINK_CMD_UPDOWN_INTF		= 0x0018,
+	QLINK_CMD_REG_REGION		= 0x0019,
+	QLINK_CMD_CHANS_INFO_GET	= 0x001A,
+	QLINK_CMD_CONFIG_AP		= 0x0020,
+	QLINK_CMD_START_AP		= 0x0021,
+	QLINK_CMD_STOP_AP		= 0x0022,
+	QLINK_CMD_GET_STA_INFO		= 0x0030,
+	QLINK_CMD_ADD_KEY		= 0x0040,
+	QLINK_CMD_DEL_KEY		= 0x0041,
+	QLINK_CMD_SET_DEFAULT_KEY	= 0x0042,
+	QLINK_CMD_SET_DEFAULT_MGMT_KEY	= 0x0043,
+	QLINK_CMD_CHANGE_STA		= 0x0051,
+	QLINK_CMD_DEL_STA		= 0x0052,
+	QLINK_CMD_SCAN			= 0x0053,
+	QLINK_CMD_CONNECT		= 0x0060,
+	QLINK_CMD_DISCONNECT		= 0x0061,
+};
+
+/**
+ * struct qlink_cmd - QLINK command message header
+ *
+ * Header used for QLINK messages of QLINK_MSG_TYPE_CMD type.
+ *
+ * @mhdr: Common QLINK message header.
+ * @cmd_id: command id, one of &enum qlink_cmd_type.
+ * @seq_num: sequence number of command message, used for matching with
+ *	response message.
+ * @macid: index of physical radio device the command is destined to or
+ *	QLINK_MACID_RSVD if not applicable.
+ * @vifid: index of virtual wireless interface on specified @macid the command
+ *	is destined to or QLINK_VIFID_RSVD if not applicable.
+ */
+struct qlink_cmd {
+	struct qlink_msg_header mhdr;
+	__le16 cmd_id;
+	__le16 seq_num;
+	u8 rsvd[2];
+	u8 macid;
+	u8 vifid;
+} __packed;
+
+/**
+ * struct qlink_cmd_manage_intf - interface management command
+ *
+ * Data for interface management commands QLINK_CMD_ADD_INTF, QLINK_CMD_DEL_INTF
+ * and QLINK_CMD_CHANGE_INTF.
+ *
+ * @intf_info: interface description.
+ */
+struct qlink_cmd_manage_intf {
+	struct qlink_cmd chdr;
+	struct qlink_intf_info intf_info;
+} __packed;
+
+enum qlink_mgmt_frame_type {
+	QLINK_MGMT_FRAME_ASSOC_REQ	= 0x00,
+	QLINK_MGMT_FRAME_ASSOC_RESP	= 0x01,
+	QLINK_MGMT_FRAME_REASSOC_REQ	= 0x02,
+	QLINK_MGMT_FRAME_REASSOC_RESP	= 0x03,
+	QLINK_MGMT_FRAME_PROBE_REQ	= 0x04,
+	QLINK_MGMT_FRAME_PROBE_RESP	= 0x05,
+	QLINK_MGMT_FRAME_BEACON		= 0x06,
+	QLINK_MGMT_FRAME_ATIM		= 0x07,
+	QLINK_MGMT_FRAME_DISASSOC	= 0x08,
+	QLINK_MGMT_FRAME_AUTH		= 0x09,
+	QLINK_MGMT_FRAME_DEAUTH		= 0x0A,
+	QLINK_MGMT_FRAME_ACTION		= 0x0B,
+
+	QLINK_MGMT_FRAME_TYPE_COUNT
+};
+
+/**
+ * struct qlink_cmd_mgmt_frame_register - data for QLINK_CMD_REGISTER_MGMT
+ *
+ * @frame_type: MGMT frame type the registration request describes, one of
+ *	&enum qlink_mgmt_frame_type.
+ * @do_register: 0 - unregister, otherwise register for reception of specified
+ *	MGMT frame type.
+ */
+struct qlink_cmd_mgmt_frame_register {
+	struct qlink_cmd chdr;
+	__le16 frame_type;
+	u8 do_register;
+} __packed;
+
+enum qlink_mgmt_frame_tx_flags {
+	QLINK_MGMT_FRAME_TX_FLAG_NONE		= 0,
+	QLINK_MGMT_FRAME_TX_FLAG_OFFCHAN	= BIT(0),
+	QLINK_MGMT_FRAME_TX_FLAG_NO_CCK		= BIT(1),
+	QLINK_MGMT_FRAME_TX_FLAG_ACK_NOWAIT	= BIT(2),
+};
+
+/**
+ * struct qlink_cmd_mgmt_frame_tx - data for QLINK_CMD_SEND_MGMT_FRAME command
+ *
+ * @cookie: opaque request identifier.
+ * @freq: Frequency to use for frame transmission.
+ * @flags: Transmission flags, one of &enum qlink_mgmt_frame_tx_flags.
+ * @frame_data: frame to transmit.
+ */
+struct qlink_cmd_mgmt_frame_tx {
+	struct qlink_cmd chdr;
+	__le32 cookie;
+	__le16 freq;
+	__le16 flags;
+	u8 frame_data[0];
+} __packed;
+
+/**
+ * struct qlink_cmd_mgmt_append_ie - data for QLINK_CMD_MGMT_SET_APPIE command
+ *
+ * @type: type of MGMT frame to appent requested IEs to, one of
+ *	&enum qlink_mgmt_frame_type.
+ * @flags: for future use.
+ * @ie_data: IEs data to append.
+ */
+struct qlink_cmd_mgmt_append_ie {
+	struct qlink_cmd chdr;
+	u8 type;
+	u8 flags;
+	u8 ie_data[0];
+} __packed;
+
+/**
+ * struct qlink_cmd_get_sta_info - data for QLINK_CMD_GET_STA_INFO command
+ *
+ * @sta_addr: MAC address of the STA statistics is requested for.
+ */
+struct qlink_cmd_get_sta_info {
+	struct qlink_cmd chdr;
+	u8 sta_addr[ETH_ALEN];
+} __packed;
+
+/**
+ * struct qlink_cmd_add_key - data for QLINK_CMD_ADD_KEY command.
+ *
+ * @key_index: index of the key being installed.
+ * @pairwise: whether to use pairwise key.
+ * @addr: MAC address of a STA key is being installed to.
+ * @cipher: cipher suite.
+ * @key_data: key data itself.
+ */
+struct qlink_cmd_add_key {
+	struct qlink_cmd chdr;
+	u8 key_index;
+	u8 pairwise;
+	u8 addr[ETH_ALEN];
+	__le32 cipher;
+	u8 key_data[0];
+} __packed;
+
+/**
+ * struct qlink_cmd_del_key_req - data for QLINK_CMD_DEL_KEY command
+ *
+ * @key_index: index of the key being removed.
+ * @pairwise: whether to use pairwise key.
+ * @addr: MAC address of a STA for which a key is removed.
+ */
+struct qlink_cmd_del_key {
+	struct qlink_cmd chdr;
+	u8 key_index;
+	u8 pairwise;
+	u8 addr[ETH_ALEN];
+} __packed;
+
+/**
+ * struct qlink_cmd_set_def_key - data for QLINK_CMD_SET_DEFAULT_KEY command
+ *
+ * @key_index: index of the key to be set as default one.
+ * @unicast: key is unicast.
+ * @multicast: key is multicast.
+ */
+struct qlink_cmd_set_def_key {
+	struct qlink_cmd chdr;
+	u8 key_index;
+	u8 unicast;
+	u8 multicast;
+} __packed;
+
+/**
+ * struct qlink_cmd_set_def_mgmt_key - data for QLINK_CMD_SET_DEFAULT_MGMT_KEY
+ *
+ * @key_index: index of the key to be set as default MGMT key.
+ */
+struct qlink_cmd_set_def_mgmt_key {
+	struct qlink_cmd chdr;
+	u8 key_index;
+} __packed;
+
+/**
+ * struct qlink_cmd_change_sta - data for QLINK_CMD_CHANGE_STA command
+ *
+ * @sta_flags_mask: STA flags mask, bitmap of &enum qlink_sta_flags
+ * @sta_flags_set: STA flags values, bitmap of &enum qlink_sta_flags
+ * @sta_addr: address of the STA for which parameters are set.
+ */
+struct qlink_cmd_change_sta {
+	struct qlink_cmd chdr;
+	__le32 sta_flags_mask;
+	__le32 sta_flags_set;
+	u8 sta_addr[ETH_ALEN];
+} __packed;
+
+/**
+ * struct qlink_cmd_del_sta - data for QLINK_CMD_DEL_STA command.
+ *
+ * See &struct station_del_parameters
+ */
+struct qlink_cmd_del_sta {
+	struct qlink_cmd chdr;
+	__le16 reason_code;
+	u8 subtype;
+	u8 sta_addr[ETH_ALEN];
+} __packed;
+
+enum qlink_sta_connect_flags {
+	QLINK_STA_CONNECT_DISABLE_HT	= BIT(0),
+	QLINK_STA_CONNECT_DISABLE_VHT	= BIT(1),
+	QLINK_STA_CONNECT_USE_RRM	= BIT(2),
+};
+
+/**
+ * struct qlink_cmd_connect - data for QLINK_CMD_CONNECT command
+ *
+ * @flags: for future use.
+ * @freq: center frequence of a channel which should be used to connect.
+ * @bg_scan_period: period of background scan.
+ * @bssid: BSSID of the BSS to connect to.
+ * @payload: variable portion of connection request.
+ */
+struct qlink_cmd_connect {
+	struct qlink_cmd chdr;
+	__le32 flags;
+	__le16 freq;
+	__le16 bg_scan_period;
+	u8 bssid[ETH_ALEN];
+	u8 payload[0];
+} __packed;
+
+/**
+ * struct qlink_cmd_disconnect - data for QLINK_CMD_DISCONNECT command
+ *
+ * @reason: code of the reason of disconnect, see &enum ieee80211_reasoncode.
+ */
+struct qlink_cmd_disconnect {
+	struct qlink_cmd chdr;
+	__le16 reason;
+} __packed;
+
+/**
+ * struct qlink_cmd_updown - data for QLINK_CMD_UPDOWN_INTF command
+ *
+ * @if_up: bring specified interface DOWN (if_up==0) or UP (otherwise).
+ *	Interface is specified in common command header @chdr.
+ */
+struct qlink_cmd_updown {
+	struct qlink_cmd chdr;
+	u8 if_up;
+} __packed;
+
+/**
+ * enum qlink_band - a list of frequency bands
+ *
+ * @QLINK_BAND_2GHZ: 2.4GHz band
+ * @QLINK_BAND_5GHZ: 5GHz band
+ * @QLINK_BAND_60GHZ: 60GHz band
+ */
+enum qlink_band {
+	QLINK_BAND_2GHZ = BIT(0),
+	QLINK_BAND_5GHZ = BIT(1),
+	QLINK_BAND_60GHZ = BIT(2),
+};
+
+/**
+ * struct qlink_cmd_chans_info_get - data for QLINK_CMD_CHANS_INFO_GET command
+ *
+ * @band: a PHY band for which channels info is needed, one of @enum qlink_band
+ */
+struct qlink_cmd_chans_info_get {
+	struct qlink_cmd chdr;
+	u8 band;
+} __packed;
+
+/* QLINK Command Responses messages related definitions
+ */
+
+enum qlink_cmd_result {
+	QLINK_CMD_RESULT_OK = 0,
+	QLINK_CMD_RESULT_INVALID,
+	QLINK_CMD_RESULT_ENOTSUPP,
+	QLINK_CMD_RESULT_ENOTFOUND,
+};
+
+/**
+ * struct qlink_resp - QLINK command response message header
+ *
+ * Header used for QLINK messages of QLINK_MSG_TYPE_CMDRSP type.
+ *
+ * @mhdr: see &struct qlink_msg_header.
+ * @cmd_id: command ID the response corresponds to, one of &enum qlink_cmd_type.
+ * @seq_num: sequence number of command message, used for matching with
+ *	response message.
+ * @result: result of the command execution, one of &enum qlink_cmd_result.
+ * @macid: index of physical radio device the response is sent from or
+ *	QLINK_MACID_RSVD if not applicable.
+ * @vifid: index of virtual wireless interface on specified @macid the response
+ *	is sent from or QLINK_VIFID_RSVD if not applicable.
+ */
+struct qlink_resp {
+	struct qlink_msg_header mhdr;
+	__le16 cmd_id;
+	__le16 seq_num;
+	__le16 result;
+	u8 macid;
+	u8 vifid;
+} __packed;
+
+/**
+ * struct qlink_resp_get_mac_info - response for QLINK_CMD_MAC_INFO command
+ *
+ * Data describing specific physical device providing wireless MAC
+ * functionality.
+ *
+ * @dev_mac: MAC address of physical WMAC device (used for first BSS on
+ *	specified WMAC).
+ * @num_tx_chain: Number of transmit chains used by WMAC.
+ * @num_rx_chain: Number of receive chains used by WMAC.
+ * @vht_cap: VHT capabilities.
+ * @ht_cap: HT capabilities.
+ * @bands_cap: wireless bands WMAC can operate in, bitmap of &enum qlink_band.
+ * @phymode_cap: PHY modes WMAC can operate in, bitmap of &enum qlink_phy_mode.
+ * @max_ap_assoc_sta: Maximum number of associations supported by WMAC.
+ * @radar_detect_widths: bitmask of channels BW for which WMAC can detect radar.
+ * @var_info: variable-length WMAC info data.
+ */
+struct qlink_resp_get_mac_info {
+	struct qlink_resp rhdr;
+	u8 dev_mac[ETH_ALEN];
+	u8 num_tx_chain;
+	u8 num_rx_chain;
+	struct ieee80211_vht_cap vht_cap;
+	struct ieee80211_ht_cap ht_cap;
+	u8 bands_cap;
+	u8 phymode_cap;
+	__le16 max_ap_assoc_sta;
+	__le16 radar_detect_widths;
+	u8 var_info[0];
+} __packed;
+
+/**
+ * struct qlink_resp_get_hw_info - response for QLINK_CMD_GET_HW_INFO command
+ *
+ * Description of wireless hardware capabilities and features.
+ *
+ * @fw_ver: wireless hardware firmware version.
+ * @hw_capab: Bitmap of capabilities supported by firmware.
+ * @ql_proto_ver: Version of QLINK protocol used by firmware.
+ * @country_code: country code ID firmware is configured to.
+ * @num_mac: Number of separate physical radio devices provided by hardware.
+ * @mac_bitmap: Bitmap of MAC IDs that are active and can be used in firmware.
+ * @total_tx_chains: total number of transmit chains used by device.
+ * @total_rx_chains: total number of receive chains.
+ */
+struct qlink_resp_get_hw_info {
+	struct qlink_resp rhdr;
+	__le32 fw_ver;
+	__le32 hw_capab;
+	__le16 ql_proto_ver;
+	u8 alpha2_code[2];
+	u8 num_mac;
+	u8 mac_bitmap;
+	u8 total_tx_chain;
+	u8 total_rx_chain;
+} __packed;
+
+/**
+ * struct qlink_resp_manage_intf - response for interface management commands
+ *
+ * Response data for QLINK_CMD_ADD_INTF and QLINK_CMD_CHANGE_INTF commands.
+ *
+ * @rhdr: Common Command Response message header.
+ * @intf_info: interface description.
+ */
+struct qlink_resp_manage_intf {
+	struct qlink_resp rhdr;
+	struct qlink_intf_info intf_info;
+} __packed;
+
+/**
+ * struct qlink_resp_get_sta_info - response for QLINK_CMD_GET_STA_INFO command
+ *
+ * Response data containing statistics for specified STA.
+ *
+ * @sta_addr: MAC address of STA the response carries statistic for.
+ * @info: statistics for specified STA.
+ */
+struct qlink_resp_get_sta_info {
+	struct qlink_resp rhdr;
+	u8 sta_addr[ETH_ALEN];
+	u8 info[0];
+} __packed;
+
+/**
+ * struct qlink_resp_get_chan_info - response for QLINK_CMD_CHANS_INFO_GET cmd
+ *
+ * @band: frequency band to which channels belong to, one of @enum qlink_band.
+ * @num_chans: total number of channels info data contained in reply data.
+ * @info: variable-length channels info.
+ */
+struct qlink_resp_get_chan_info {
+	struct qlink_resp rhdr;
+	u8 band;
+	u8 num_chans;
+	u8 rsvd[2];
+	u8 info[0];
+} __packed;
+
+/**
+ * struct qlink_resp_phy_params - response for QLINK_CMD_PHY_PARAMS_GET command
+ *
+ * @info: variable-length array of PHY params.
+ */
+struct qlink_resp_phy_params {
+	struct qlink_resp rhdr;
+	u8 info[0];
+} __packed;
+
+/* QLINK Events messages related definitions
+ */
+
+enum qlink_event_type {
+	QLINK_EVENT_STA_ASSOCIATED	= 0x0021,
+	QLINK_EVENT_STA_DEAUTH		= 0x0022,
+	QLINK_EVENT_MGMT_RECEIVED	= 0x0023,
+	QLINK_EVENT_SCAN_RESULTS	= 0x0024,
+	QLINK_EVENT_SCAN_COMPLETE	= 0x0025,
+	QLINK_EVENT_BSS_JOIN		= 0x0026,
+	QLINK_EVENT_BSS_LEAVE		= 0x0027,
+};
+
+/**
+ * struct qlink_event - QLINK event message header
+ *
+ * Header used for QLINK messages of QLINK_MSG_TYPE_EVENT type.
+ *
+ * @mhdr: Common QLINK message header.
+ * @event_id: Specifies specific event ID, one of &enum qlink_event_type.
+ * @macid: index of physical radio device the event was generated on or
+ *	QLINK_MACID_RSVD if not applicable.
+ * @vifid: index of virtual wireless interface on specified @macid the event
+ *	was generated on or QLINK_VIFID_RSVD if not applicable.
+ */
+struct qlink_event {
+	struct qlink_msg_header mhdr;
+	__le16 event_id;
+	u8 macid;
+	u8 vifid;
+} __packed;
+
+/**
+ * struct qlink_event_sta_assoc - data for QLINK_EVENT_STA_ASSOCIATED event
+ *
+ * @sta_addr: Address of a STA for which new association event was generated
+ * @frame_control: control bits from 802.11 ASSOC_REQUEST header.
+ * @payload: IEs from association request.
+ */
+struct qlink_event_sta_assoc {
+	struct qlink_event ehdr;
+	u8 sta_addr[ETH_ALEN];
+	__le16 frame_control;
+	u8 ies[0];
+} __packed;
+
+/**
+ * struct qlink_event_sta_deauth - data for QLINK_EVENT_STA_DEAUTH event
+ *
+ * @sta_addr: Address of a deauthenticated STA.
+ * @reason: reason for deauthentication.
+ */
+struct qlink_event_sta_deauth {
+	struct qlink_event ehdr;
+	u8 sta_addr[ETH_ALEN];
+	__le16 reason;
+} __packed;
+
+/**
+ * struct qlink_event_bss_join - data for QLINK_EVENT_BSS_JOIN event
+ *
+ * @bssid: BSSID of a BSS which interface tried to joined.
+ * @status: status of joining attempt, see &enum ieee80211_statuscode.
+ */
+struct qlink_event_bss_join {
+	struct qlink_event ehdr;
+	u8 bssid[ETH_ALEN];
+	__le16 status;
+} __packed;
+
+/**
+ * struct qlink_event_bss_leave - data for QLINK_EVENT_BSS_LEAVE event
+ *
+ * @reason: reason of disconnecting from BSS.
+ */
+struct qlink_event_bss_leave {
+	struct qlink_event ehdr;
+	u16 reason;
+} __packed;
+
+enum qlink_rxmgmt_flags {
+	QLINK_RXMGMT_FLAG_ANSWERED = 1 << 0,
+};
+
+/**
+ * struct qlink_event_rxmgmt - data for QLINK_EVENT_MGMT_RECEIVED event
+ *
+ * @freq: Frequency on which the frame was received in MHz.
+ * @sig_dbm: signal strength in dBm.
+ * @flags: bitmap of &enum qlink_rxmgmt_flags.
+ * @frame_data: data of Rx'd frame itself.
+ */
+struct qlink_event_rxmgmt {
+	struct qlink_event ehdr;
+	__le32 freq;
+	__le32 sig_dbm;
+	__le32 flags;
+	u8 frame_data[0];
+} __packed;
+
+enum qlink_frame_type {
+	QLINK_BSS_FTYPE_UNKNOWN,
+	QLINK_BSS_FTYPE_BEACON,
+	QLINK_BSS_FTYPE_PRESP,
+};
+
+/**
+ * struct qlink_event_scan_result - data for QLINK_EVENT_SCAN_RESULTS event
+ *
+ * @tsf: TSF timestamp indicating when scan results were generated.
+ * @freq: Center frequency of the channel where BSS for which the scan result
+ *	event was generated was discovered.
+ * @capab: capabilities field.
+ * @bintval: beacon interval announced by discovered BSS.
+ * @signal: signal strength.
+ * @frame_type: frame type used to get scan result, see &enum qlink_frame_type.
+ * @bssid: BSSID announced by discovered BSS.
+ * @ssid_len: length of SSID announced by BSS.
+ * @ssid: SSID announced by discovered BSS.
+ * @payload: IEs that are announced by discovered BSS in its MGMt frames.
+ */
+struct qlink_event_scan_result {
+	struct qlink_event ehdr;
+	__le64 tsf;
+	__le16 freq;
+	__le16 capab;
+	__le16 bintval;
+	s8 signal;
+	u8 frame_type;
+	u8 bssid[ETH_ALEN];
+	u8 ssid_len;
+	u8 ssid[IEEE80211_MAX_SSID_LEN];
+	u8 payload[0];
+} __packed;
+
+/**
+ * enum qlink_scan_complete_flags - indicates result of scan request.
+ *
+ * @QLINK_SCAN_NONE: Scan request was processed.
+ * @QLINK_SCAN_ABORTED: Scan was aborted.
+ */
+enum qlink_scan_complete_flags {
+	QLINK_SCAN_NONE		= 0,
+	QLINK_SCAN_ABORTED	= BIT(0),
+};
+
+/**
+ * struct qlink_event_scan_complete - data for QLINK_EVENT_SCAN_COMPLETE event
+ *
+ * @flags: flags indicating the status of pending scan request,
+ *	see &enum qlink_scan_complete_flags.
+ */
+struct qlink_event_scan_complete {
+	struct qlink_event ehdr;
+	__le32 flags;
+} __packed;
+
+/* QLINK TLVs (Type-Length Values) definitions
+ */
+
+enum qlink_tlv_id {
+	QTN_TLV_ID_FRAG_THRESH		= 0x0201,
+	QTN_TLV_ID_RTS_THRESH		= 0x0202,
+	QTN_TLV_ID_SRETRY_LIMIT		= 0x0203,
+	QTN_TLV_ID_LRETRY_LIMIT		= 0x0204,
+	QTN_TLV_ID_BCN_PERIOD		= 0x0205,
+	QTN_TLV_ID_DTIM			= 0x0206,
+	QTN_TLV_ID_CHANNEL		= 0x020F,
+	QTN_TLV_ID_COVERAGE_CLASS	= 0x0213,
+	QTN_TLV_ID_IFACE_LIMIT		= 0x0214,
+	QTN_TLV_ID_NUM_IFACE_COMB	= 0x0215,
+	QTN_TLV_ID_STA_BASIC_COUNTERS	= 0x0300,
+	QTN_TLV_ID_STA_GENERIC_INFO	= 0x0301,
+	QTN_TLV_ID_KEY			= 0x0302,
+	QTN_TLV_ID_SEQ			= 0x0303,
+	QTN_TLV_ID_CRYPTO		= 0x0304,
+	QTN_TLV_ID_IE_SET		= 0x0305,
+};
+
+struct qlink_tlv_hdr {
+	__le16 type;
+	__le16 len;
+	u8 val[0];
+} __packed;
+
+struct qlink_iface_limit {
+	__le16 max_num;
+	__le16 type_mask;
+} __packed;
+
+struct qlink_iface_comb_num {
+	__le16 iface_comb_num;
+} __packed;
+
+struct qlink_sta_stat_basic_counters {
+	__le64 rx_bytes;
+	__le64 tx_bytes;
+	__le64 rx_beacons;
+	__le32 rx_packets;
+	__le32 tx_packets;
+	__le32 rx_dropped;
+	__le32 tx_failed;
+} __packed;
+
+enum qlink_sta_info_rate_flags {
+	QLINK_STA_INFO_RATE_FLAG_INVALID	= 0,
+	QLINK_STA_INFO_RATE_FLAG_HT_MCS		= BIT(0),
+	QLINK_STA_INFO_RATE_FLAG_VHT_MCS	= BIT(1),
+	QLINK_STA_INFO_RATE_FLAG_SHORT_GI	= BIT(2),
+	QLINK_STA_INFO_RATE_FLAG_60G		= BIT(3),
+};
+
+enum qlink_sta_info_rate_bw {
+	QLINK_STA_INFO_RATE_BW_5		= 0,
+	QLINK_STA_INFO_RATE_BW_10		= 1,
+	QLINK_STA_INFO_RATE_BW_20		= 2,
+	QLINK_STA_INFO_RATE_BW_40		= 3,
+	QLINK_STA_INFO_RATE_BW_80		= 4,
+	QLINK_STA_INFO_RATE_BW_160		= 5,
+};
+
+/**
+ * struct qlink_sta_info_rate - STA rate statistics
+ *
+ * @rate: data rate in Mbps.
+ * @flags: bitmap of &enum qlink_sta_flags.
+ * @mcs: 802.11-defined MCS index.
+ * nss: Number of Spatial Streams.
+ * @bw: bandwidth, one of &enum qlink_sta_info_rate_bw.
+ */
+struct qlink_sta_info_rate {
+	__le16 rate;
+	u8 flags;
+	u8 mcs;
+	u8 nss;
+	u8 bw;
+} __packed;
+
+struct qlink_sta_info_state {
+	__le32 mask;
+	__le32 value;
+} __packed;
+
+#define QLINK_RSSI_OFFSET	120
+
+struct qlink_sta_info_generic {
+	struct qlink_sta_info_state state;
+	__le32 connected_time;
+	__le32 inactive_time;
+	struct qlink_sta_info_rate rx_rate;
+	struct qlink_sta_info_rate tx_rate;
+	u8 rssi;
+	u8 rssi_avg;
+} __packed;
+
+struct qlink_tlv_frag_rts_thr {
+	struct qlink_tlv_hdr hdr;
+	__le16 thr;
+} __packed;
+
+struct qlink_tlv_rlimit {
+	struct qlink_tlv_hdr hdr;
+	u8 rlimit;
+} __packed;
+
+struct qlink_tlv_cclass {
+	struct qlink_tlv_hdr hdr;
+	u8 cclass;
+} __packed;
+
+enum qlink_dfs_state {
+	QLINK_DFS_USABLE,
+	QLINK_DFS_UNAVAILABLE,
+	QLINK_DFS_AVAILABLE,
+};
+
+enum qlink_channel_flags {
+	QLINK_CHAN_DISABLED		= BIT(0),
+	QLINK_CHAN_NO_IR		= BIT(1),
+	QLINK_CHAN_RADAR		= BIT(3),
+	QLINK_CHAN_NO_HT40PLUS		= BIT(4),
+	QLINK_CHAN_NO_HT40MINUS		= BIT(5),
+	QLINK_CHAN_NO_OFDM		= BIT(6),
+	QLINK_CHAN_NO_80MHZ		= BIT(7),
+	QLINK_CHAN_NO_160MHZ		= BIT(8),
+	QLINK_CHAN_INDOOR_ONLY		= BIT(9),
+	QLINK_CHAN_IR_CONCURRENT	= BIT(10),
+	QLINK_CHAN_NO_20MHZ		= BIT(11),
+	QLINK_CHAN_NO_10MHZ		= BIT(12),
+};
+
+struct qlink_tlv_channel {
+	struct qlink_tlv_hdr hdr;
+	__le16 hw_value;
+	__le16 center_freq;
+	__le32 flags;
+	u8 band;
+	u8 max_antenna_gain;
+	u8 max_power;
+	u8 max_reg_power;
+	__le32 dfs_cac_ms;
+	u8 dfs_state;
+	u8 beacon_found;
+	u8 rsvd[2];
+} __packed;
+
+#define QLINK_MAX_NR_CIPHER_SUITES            5
+#define QLINK_MAX_NR_AKM_SUITES               2
+
+struct qlink_auth_encr {
+	__le32 wpa_versions;
+	__le32 cipher_group;
+	__le32 n_ciphers_pairwise;
+	__le32 ciphers_pairwise[QLINK_MAX_NR_CIPHER_SUITES];
+	__le32 n_akm_suites;
+	__le32 akm_suites[QLINK_MAX_NR_AKM_SUITES];
+	__le16 control_port_ethertype;
+	u8 auth_type;
+	u8 privacy;
+	u8 mfp;
+	u8 control_port;
+	u8 control_port_no_encrypt;
+} __packed;
+
+#endif /* _QTN_QLINK_H_ */