Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Some highlights from this development cycle:

   1) Big refactoring of ipv6 route and neigh handling to support
      nexthop objects configurable as units from userspace. From David
      Ahern.

   2) Convert explored_states in BPF verifier into a hash table,
      significantly decreased state held for programs with bpf2bpf
      calls, from Alexei Starovoitov.

   3) Implement bpf_send_signal() helper, from Yonghong Song.

   4) Various classifier enhancements to mvpp2 driver, from Maxime
      Chevallier.

   5) Add aRFS support to hns3 driver, from Jian Shen.

   6) Fix use after free in inet frags by allocating fqdirs dynamically
      and reworking how rhashtable dismantle occurs, from Eric Dumazet.

   7) Add act_ctinfo packet classifier action, from Kevin
      Darbyshire-Bryant.

   8) Add TFO key backup infrastructure, from Jason Baron.

   9) Remove several old and unused ISDN drivers, from Arnd Bergmann.

  10) Add devlink notifications for flash update status to mlxsw driver,
      from Jiri Pirko.

  11) Lots of kTLS offload infrastructure fixes, from Jakub Kicinski.

  12) Add support for mv88e6250 DSA chips, from Rasmus Villemoes.

  13) Various enhancements to ipv6 flow label handling, from Eric
      Dumazet and Willem de Bruijn.

  14) Support TLS offload in nfp driver, from Jakub Kicinski, Dirk van
      der Merwe, and others.

  15) Various improvements to axienet driver including converting it to
      phylink, from Robert Hancock.

  16) Add PTP support to sja1105 DSA driver, from Vladimir Oltean.

  17) Add mqprio qdisc offload support to dpaa2-eth, from Ioana
      Radulescu.

  18) Add devlink health reporting to mlx5, from Moshe Shemesh.

  19) Convert stmmac over to phylink, from Jose Abreu.

  20) Add PTP PHC (Physical Hardware Clock) support to mlxsw, from
      Shalom Toledo.

  21) Add nftables SYNPROXY support, from Fernando Fernandez Mancera.

  22) Convert tcp_fastopen over to use SipHash, from Ard Biesheuvel.

  23) Track spill/fill of constants in BPF verifier, from Alexei
      Starovoitov.

  24) Support bounded loops in BPF, from Alexei Starovoitov.

  25) Various page_pool API fixes and improvements, from Jesper Dangaard
      Brouer.

  26) Just like ipv4, support ref-countless ipv6 route handling. From
      Wei Wang.

  27) Support VLAN offloading in aquantia driver, from Igor Russkikh.

  28) Add AF_XDP zero-copy support to mlx5, from Maxim Mikityanskiy.

  29) Add flower GRE encap/decap support to nfp driver, from Pieter
      Jansen van Vuuren.

  30) Protect against stack overflow when using act_mirred, from John
      Hurley.

  31) Allow devmap map lookups from eBPF, from Toke Høiland-Jørgensen.

  32) Use page_pool API in netsec driver, Ilias Apalodimas.

  33) Add Google gve network driver, from Catherine Sullivan.

  34) More indirect call avoidance, from Paolo Abeni.

  35) Add kTLS TX HW offload support to mlx5, from Tariq Toukan.

  36) Add XDP_REDIRECT support to bnxt_en, from Andy Gospodarek.

  37) Add MPLS manipulation actions to TC, from John Hurley.

  38) Add sending a packet to connection tracking from TC actions, and
      then allow flower classifier matching on conntrack state. From
      Paul Blakey.

  39) Netfilter hw offload support, from Pablo Neira Ayuso"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2080 commits)
  net/mlx5e: Return in default case statement in tx_post_resync_params
  mlx5: Return -EINVAL when WARN_ON_ONCE triggers in mlx5e_tls_resync().
  net: dsa: add support for BRIDGE_MROUTER attribute
  pkt_sched: Include const.h
  net: netsec: remove static declaration for netsec_set_tx_de()
  net: netsec: remove superfluous if statement
  netfilter: nf_tables: add hardware offload support
  net: flow_offload: rename tc_cls_flower_offload to flow_cls_offload
  net: flow_offload: add flow_block_cb_is_busy() and use it
  net: sched: remove tcf block API
  drivers: net: use flow block API
  net: sched: use flow block API
  net: flow_offload: add flow_block_cb_{priv, incref, decref}()
  net: flow_offload: add list handling functions
  net: flow_offload: add flow_block_cb_alloc() and flow_block_cb_free()
  net: flow_offload: rename TCF_BLOCK_BINDER_TYPE_* to FLOW_BLOCK_BINDER_TYPE_*
  net: flow_offload: rename TC_BLOCK_{UN}BIND to FLOW_BLOCK_{UN}BIND
  net: flow_offload: add flow_block_cb_setup_simple()
  net: hisilicon: Add an tx_desc to adapt HI13X1_GMAC
  net: hisilicon: Add an rx_desc to adapt HI13X1_GMAC
  ...

1 files changed, 97 insertions, 94 deletions

diff --git a/drivers/net/wireless/mediatek/mt76/mt7603/mac.c b/drivers/net/wireless/mediatek/mt76/mt7603/mac.c
index 6d506e34c3ee..40db1cbc832d 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7603/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7603/mac.c
@@ -370,31 +370,6 @@ void mt7603_mac_tx_ba_reset(struct mt7603_dev *dev, int wcid, int tid,
 	mt76_rmw(dev, addr + (15 * 4), tid_mask, tid_val);
 }
 
-static int
-mt7603_get_rate(struct mt7603_dev *dev, struct ieee80211_supported_band *sband,
-		int idx, bool cck)
-{
-	int offset = 0;
-	int len = sband->n_bitrates;
-	int i;
-
-	if (cck) {
-		if (sband == &dev->mt76.sband_5g.sband)
-			return 0;
-
-		idx &= ~BIT(2); /* short preamble */
-	} else if (sband == &dev->mt76.sband_2g.sband) {
-		offset = 4;
-	}
-
-	for (i = offset; i < len; i++) {
-		if ((sband->bitrates[i].hw_value & GENMASK(7, 0)) == idx)
-			return i;
-	}
-
-	return 0;
-}
-
 static struct mt76_wcid *
 mt7603_rx_get_wcid(struct mt7603_dev *dev, u8 idx, bool unicast)
 {
@@ -418,30 +393,6 @@ mt7603_rx_get_wcid(struct mt7603_dev *dev, u8 idx, bool unicast)
 	return &sta->vif->sta.wcid;
 }
 
-static void
-mt7603_insert_ccmp_hdr(struct sk_buff *skb, u8 key_id)
-{
-	struct mt76_rx_status *status = (struct mt76_rx_status *)skb->cb;
-	int hdr_len = ieee80211_get_hdrlen_from_skb(skb);
-	u8 *pn = status->iv;
-	u8 *hdr;
-
-	__skb_push(skb, 8);
-	memmove(skb->data, skb->data + 8, hdr_len);
-	hdr = skb->data + hdr_len;
-
-	hdr[0] = pn[5];
-	hdr[1] = pn[4];
-	hdr[2] = 0;
-	hdr[3] = 0x20 | (key_id << 6);
-	hdr[4] = pn[3];
-	hdr[5] = pn[2];
-	hdr[6] = pn[1];
-	hdr[7] = pn[0];
-
-	status->flag &= ~RX_FLAG_IV_STRIPPED;
-}
-
 int
 mt7603_mac_fill_rx(struct mt7603_dev *dev, struct sk_buff *skb)
 {
@@ -532,7 +483,7 @@ mt7603_mac_fill_rx(struct mt7603_dev *dev, struct sk_buff *skb)
 			cck = true;
 			/* fall through */
 		case MT_PHY_TYPE_OFDM:
-			i = mt7603_get_rate(dev, sband, i, cck);
+			i = mt76_get_rate(&dev->mt76, sband, i, cck);
 			break;
 		case MT_PHY_TYPE_HT_GF:
 		case MT_PHY_TYPE_HT:
@@ -580,7 +531,7 @@ mt7603_mac_fill_rx(struct mt7603_dev *dev, struct sk_buff *skb)
 	if (insert_ccmp_hdr) {
 		u8 key_id = FIELD_GET(MT_RXD1_NORMAL_KEY_ID, rxd1);
 
-		mt7603_insert_ccmp_hdr(skb, key_id);
+		mt76_insert_ccmp_hdr(skb, key_id);
 	}
 
 	hdr = (struct ieee80211_hdr *)skb->data;
@@ -640,6 +591,7 @@ void mt7603_wtbl_set_rates(struct mt7603_dev *dev, struct mt7603_sta *sta,
 			   struct ieee80211_tx_rate *probe_rate,
 			   struct ieee80211_tx_rate *rates)
 {
+	struct ieee80211_tx_rate *ref;
 	int wcid = sta->wcid.idx;
 	u32 addr = mt7603_wtbl2_addr(wcid);
 	bool stbc = false;
@@ -648,7 +600,8 @@ void mt7603_wtbl_set_rates(struct mt7603_dev *dev, struct mt7603_sta *sta,
 	u16 val[4];
 	u16 probe_val;
 	u32 w9 = mt76_rr(dev, addr + 9 * 4);
-	int i;
+	bool rateset;
+	int i, k;
 
 	if (!mt76_poll(dev, MT_WTBL_UPDATE, MT_WTBL_UPDATE_BUSY, 0, 5000))
 		return;
@@ -656,6 +609,41 @@ void mt7603_wtbl_set_rates(struct mt7603_dev *dev, struct mt7603_sta *sta,
 	for (i = n_rates; i < 4; i++)
 		rates[i] = rates[n_rates - 1];
 
+	rateset = !(sta->rate_set_tsf & BIT(0));
+	memcpy(sta->rateset[rateset].rates, rates,
+	       sizeof(sta->rateset[rateset].rates));
+	if (probe_rate) {
+		sta->rateset[rateset].probe_rate = *probe_rate;
+		ref = &sta->rateset[rateset].probe_rate;
+	} else {
+		sta->rateset[rateset].probe_rate.idx = -1;
+		ref = &sta->rateset[rateset].rates[0];
+	}
+
+	rates = sta->rateset[rateset].rates;
+	for (i = 0; i < ARRAY_SIZE(sta->rateset[rateset].rates); i++) {
+		/*
+		 * We don't support switching between short and long GI
+		 * within the rate set. For accurate tx status reporting, we
+		 * need to make sure that flags match.
+		 * For improved performance, avoid duplicate entries by
+		 * decrementing the MCS index if necessary
+		 */
+		if ((ref->flags ^ rates[i].flags) & IEEE80211_TX_RC_SHORT_GI)
+			rates[i].flags ^= IEEE80211_TX_RC_SHORT_GI;
+
+		for (k = 0; k < i; k++) {
+			if (rates[i].idx != rates[k].idx)
+				continue;
+			if ((rates[i].flags ^ rates[k].flags) &
+			    IEEE80211_TX_RC_40_MHZ_WIDTH)
+				continue;
+
+			rates[i].idx--;
+		}
+
+	}
+
 	w9 &= MT_WTBL2_W9_SHORT_GI_20 | MT_WTBL2_W9_SHORT_GI_40 |
 	      MT_WTBL2_W9_SHORT_GI_80;
 
@@ -699,19 +687,22 @@ void mt7603_wtbl_set_rates(struct mt7603_dev *dev, struct mt7603_sta *sta,
 	mt76_wr(dev, MT_WTBL_RIUCR1,
 		FIELD_PREP(MT_WTBL_RIUCR1_RATE0, probe_val) |
 		FIELD_PREP(MT_WTBL_RIUCR1_RATE1, val[0]) |
-		FIELD_PREP(MT_WTBL_RIUCR1_RATE2_LO, val[0]));
+		FIELD_PREP(MT_WTBL_RIUCR1_RATE2_LO, val[1]));
 
 	mt76_wr(dev, MT_WTBL_RIUCR2,
-		FIELD_PREP(MT_WTBL_RIUCR2_RATE2_HI, val[0] >> 8) |
+		FIELD_PREP(MT_WTBL_RIUCR2_RATE2_HI, val[1] >> 8) |
 		FIELD_PREP(MT_WTBL_RIUCR2_RATE3, val[1]) |
-		FIELD_PREP(MT_WTBL_RIUCR2_RATE4, val[1]) |
+		FIELD_PREP(MT_WTBL_RIUCR2_RATE4, val[2]) |
 		FIELD_PREP(MT_WTBL_RIUCR2_RATE5_LO, val[2]));
 
 	mt76_wr(dev, MT_WTBL_RIUCR3,
 		FIELD_PREP(MT_WTBL_RIUCR3_RATE5_HI, val[2] >> 4) |
-		FIELD_PREP(MT_WTBL_RIUCR3_RATE6, val[2]) |
+		FIELD_PREP(MT_WTBL_RIUCR3_RATE6, val[3]) |
 		FIELD_PREP(MT_WTBL_RIUCR3_RATE7, val[3]));
 
+	mt76_set(dev, MT_LPON_T0CR, MT_LPON_T0CR_MODE); /* TSF read */
+	sta->rate_set_tsf = (mt76_rr(dev, MT_LPON_UTTR0) & ~BIT(0)) | rateset;
+
 	mt76_wr(dev, MT_WTBL_UPDATE,
 		FIELD_PREP(MT_WTBL_UPDATE_WLAN_IDX, wcid) |
 		MT_WTBL_UPDATE_RATE_UPDATE |
@@ -938,9 +929,9 @@ int mt7603_tx_prepare_skb(struct mt76_dev *mdev, void *txwi_ptr,
 
 	if (info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE) {
 		spin_lock_bh(&dev->mt76.lock);
-		msta->rate_probe = true;
 		mt7603_wtbl_set_rates(dev, msta, &info->control.rates[0],
 				      msta->rates);
+		msta->rate_probe = true;
 		spin_unlock_bh(&dev->mt76.lock);
 	}
 
@@ -955,10 +946,12 @@ mt7603_fill_txs(struct mt7603_dev *dev, struct mt7603_sta *sta,
 		struct ieee80211_tx_info *info, __le32 *txs_data)
 {
 	struct ieee80211_supported_band *sband;
-	int final_idx = 0;
+	struct mt7603_rate_set *rs;
+	int first_idx = 0, last_idx;
+	u32 rate_set_tsf;
 	u32 final_rate;
 	u32 final_rate_flags;
-	bool final_mpdu;
+	bool rs_idx;
 	bool ack_timeout;
 	bool fixed_rate;
 	bool probe;
@@ -966,7 +959,6 @@ mt7603_fill_txs(struct mt7603_dev *dev, struct mt7603_sta *sta,
 	bool cck = false;
 	int count;
 	u32 txs;
-	u8 pid;
 	int idx;
 	int i;
 
@@ -974,10 +966,9 @@ mt7603_fill_txs(struct mt7603_dev *dev, struct mt7603_sta *sta,
 	probe = !!(info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE);
 
 	txs = le32_to_cpu(txs_data[4]);
-	final_mpdu = txs & MT_TXS4_ACKED_MPDU;
 	ampdu = !fixed_rate && (txs & MT_TXS4_AMPDU);
-	pid = FIELD_GET(MT_TXS4_PID, txs);
 	count = FIELD_GET(MT_TXS4_TX_COUNT, txs);
+	last_idx = FIELD_GET(MT_TXS4_LAST_TX_RATE, txs);
 
 	txs = le32_to_cpu(txs_data[0]);
 	final_rate = FIELD_GET(MT_TXS0_TX_RATE, txs);
@@ -999,38 +990,57 @@ mt7603_fill_txs(struct mt7603_dev *dev, struct mt7603_sta *sta,
 	if (ampdu || (info->flags & IEEE80211_TX_CTL_AMPDU))
 		info->flags |= IEEE80211_TX_STAT_AMPDU | IEEE80211_TX_CTL_AMPDU;
 
+	first_idx = max_t(int, 0, last_idx - (count + 1) / MT7603_RATE_RETRY);
+
 	if (fixed_rate && !probe) {
 		info->status.rates[0].count = count;
+		i = 0;
 		goto out;
 	}
 
-	for (i = 0, idx = 0; i < ARRAY_SIZE(info->status.rates); i++) {
-		int cur_count = min_t(int, count, 2 * MT7603_RATE_RETRY);
+	rate_set_tsf = READ_ONCE(sta->rate_set_tsf);
+	rs_idx = !((u32)(FIELD_GET(MT_TXS1_F0_TIMESTAMP, le32_to_cpu(txs_data[1])) -
+			 rate_set_tsf) < 1000000);
+	rs_idx ^= rate_set_tsf & BIT(0);
+	rs = &sta->rateset[rs_idx];
 
-		if (!i && probe) {
-			cur_count = 1;
-		} else {
-			info->status.rates[i] = sta->rates[idx];
-			idx++;
-		}
+	if (!first_idx && rs->probe_rate.idx >= 0) {
+		info->status.rates[0] = rs->probe_rate;
 
-		if (i && info->status.rates[i].idx < 0) {
-			info->status.rates[i - 1].count += count;
-			break;
+		spin_lock_bh(&dev->mt76.lock);
+		if (sta->rate_probe) {
+			mt7603_wtbl_set_rates(dev, sta, NULL,
+					      sta->rates);
+			sta->rate_probe = false;
 		}
+		spin_unlock_bh(&dev->mt76.lock);
+	} else
+		info->status.rates[0] = rs->rates[first_idx / 2];
+	info->status.rates[0].count = 0;
 
-		if (!count) {
-			info->status.rates[i].idx = -1;
-			break;
-		}
+	for (i = 0, idx = first_idx; count && idx <= last_idx; idx++) {
+		struct ieee80211_tx_rate *cur_rate;
+		int cur_count;
 
-		info->status.rates[i].count = cur_count;
-		final_idx = i;
+		cur_rate = &rs->rates[idx / 2];
+		cur_count = min_t(int, MT7603_RATE_RETRY, count);
 		count -= cur_count;
+
+		if (idx && (cur_rate->idx != info->status.rates[i].idx ||
+			    cur_rate->flags != info->status.rates[i].flags)) {
+			i++;
+			if (i == ARRAY_SIZE(info->status.rates))
+				break;
+
+			info->status.rates[i] = *cur_rate;
+			info->status.rates[i].count = 0;
+		}
+
+		info->status.rates[i].count += cur_count;
 	}
 
 out:
-	final_rate_flags = info->status.rates[final_idx].flags;
+	final_rate_flags = info->status.rates[i].flags;
 
 	switch (FIELD_GET(MT_TX_RATE_MODE, final_rate)) {
 	case MT_PHY_TYPE_CCK:
@@ -1042,7 +1052,8 @@ out:
 		else
 			sband = &dev->mt76.sband_2g.sband;
 		final_rate &= GENMASK(5, 0);
-		final_rate = mt7603_get_rate(dev, sband, final_rate, cck);
+		final_rate = mt76_get_rate(&dev->mt76, sband, final_rate,
+					   cck);
 		final_rate_flags = 0;
 		break;
 	case MT_PHY_TYPE_HT_GF:
@@ -1056,8 +1067,8 @@ out:
 		return false;
 	}
 
-	info->status.rates[final_idx].idx = final_rate;
-	info->status.rates[final_idx].flags = final_rate_flags;
+	info->status.rates[i].idx = final_rate;
+	info->status.rates[i].flags = final_rate_flags;
 
 	return true;
 }
@@ -1078,16 +1089,6 @@ mt7603_mac_add_txs_skb(struct mt7603_dev *dev, struct mt7603_sta *sta, int pid,
 	if (skb) {
 		struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 
-		if (info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE) {
-			spin_lock_bh(&dev->mt76.lock);
-			if (sta->rate_probe) {
-				mt7603_wtbl_set_rates(dev, sta, NULL,
-						      sta->rates);
-				sta->rate_probe = false;
-			}
-			spin_unlock_bh(&dev->mt76.lock);
-		}
-
 		if (!mt7603_fill_txs(dev, sta, info, txs_data)) {
 			ieee80211_tx_info_clear_status(info);
 			info->status.rates[0].idx = -1;
@@ -1282,6 +1283,7 @@ static void mt7603_mac_watchdog_reset(struct mt7603_dev *dev)
 	tasklet_disable(&dev->mt76.pre_tbtt_tasklet);
 	napi_disable(&dev->mt76.napi[0]);
 	napi_disable(&dev->mt76.napi[1]);
+	napi_disable(&dev->mt76.tx_napi);
 
 	mutex_lock(&dev->mt76.mutex);
 
@@ -1326,7 +1328,8 @@ skip_dma_reset:
 	mutex_unlock(&dev->mt76.mutex);
 
 	tasklet_enable(&dev->mt76.tx_tasklet);
-	tasklet_schedule(&dev->mt76.tx_tasklet);
+	napi_enable(&dev->mt76.tx_napi);
+	napi_schedule(&dev->mt76.tx_napi);
 
 	tasklet_enable(&dev->mt76.pre_tbtt_tasklet);
 	mt7603_beacon_set_timer(dev, -1, beacon_int);