Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from David Miller:
 "Another merge window, another pull full of stuff:

   1) Support alternative names for network devices, from Jiri Pirko.

   2) Introduce per-netns netdev notifiers, also from Jiri Pirko.

   3) Support MSG_PEEK in vsock/virtio, from Matias Ezequiel Vara
      Larsen.

   4) Allow compiling out the TLS TOE code, from Jakub Kicinski.

   5) Add several new tracepoints to the kTLS code, also from Jakub.

   6) Support set channels ethtool callback in ena driver, from Sameeh
      Jubran.

   7) New SCTP events SCTP_ADDR_ADDED, SCTP_ADDR_REMOVED,
      SCTP_ADDR_MADE_PRIM, and SCTP_SEND_FAILED_EVENT. From Xin Long.

   8) Add XDP support to mvneta driver, from Lorenzo Bianconi.

   9) Lots of netfilter hw offload fixes, cleanups and enhancements,
      from Pablo Neira Ayuso.

  10) PTP support for aquantia chips, from Egor Pomozov.

  11) Add UDP segmentation offload support to igb, ixgbe, and i40e. From
      Josh Hunt.

  12) Add smart nagle to tipc, from Jon Maloy.

  13) Support L2 field rewrite by TC offloads in bnxt_en, from Venkat
      Duvvuru.

  14) Add a flow mask cache to OVS, from Tonghao Zhang.

  15) Add XDP support to ice driver, from Maciej Fijalkowski.

  16) Add AF_XDP support to ice driver, from Krzysztof Kazimierczak.

  17) Support UDP GSO offload in atlantic driver, from Igor Russkikh.

  18) Support it in stmmac driver too, from Jose Abreu.

  19) Support TIPC encryption and auth, from Tuong Lien.

  20) Introduce BPF trampolines, from Alexei Starovoitov.

  21) Make page_pool API more numa friendly, from Saeed Mahameed.

  22) Introduce route hints to ipv4 and ipv6, from Paolo Abeni.

  23) Add UDP segmentation offload to cxgb4, Rahul Lakkireddy"

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1857 commits)
  libbpf: Fix usage of u32 in userspace code
  mm: Implement no-MMU variant of vmalloc_user_node_flags
  slip: Fix use-after-free Read in slip_open
  net: dsa: sja1105: fix sja1105_parse_rgmii_delays()
  macvlan: schedule bc_work even if error
  enetc: add support Credit Based Shaper(CBS) for hardware offload
  net: phy: add helpers phy_(un)lock_mdio_bus
  mdio_bus: don't use managed reset-controller
  ax88179_178a: add ethtool_op_get_ts_info()
  mlxsw: spectrum_router: Fix use of uninitialized adjacency index
  mlxsw: spectrum_router: After underlay moves, demote conflicting tunnels
  bpf: Simplify __bpf_arch_text_poke poke type handling
  bpf: Introduce BPF_TRACE_x helper for the tracing tests
  bpf: Add bpf_jit_blinding_enabled for !CONFIG_BPF_JIT
  bpf, testing: Add various tail call test cases
  bpf, x86: Emit patchable direct jump as tail call
  bpf: Constant map key tracking for prog array pokes
  bpf: Add poke dependency tracking for prog array maps
  bpf: Add initial poke descriptor table for jit images
  bpf: Move owner type, jited info into array auxiliary data
  ...

16 files changed, 163 insertions, 55 deletions

diff --git a/drivers/net/wireless/broadcom/b43/dma.c b/drivers/net/wireless/broadcom/b43/dma.c
index 31bf71a80c26..9733c64bf978 100644
--- a/drivers/net/wireless/broadcom/b43/dma.c
+++ b/drivers/net/wireless/broadcom/b43/dma.c
@@ -1400,7 +1400,7 @@ int b43_dma_tx(struct b43_wldev *dev, struct sk_buff *skb)
 		/* This TX ring is full. */
 		unsigned int skb_mapping = skb_get_queue_mapping(skb);
 		ieee80211_stop_queue(dev->wl->hw, skb_mapping);
-		dev->wl->tx_queue_stopped[skb_mapping] = 1;
+		dev->wl->tx_queue_stopped[skb_mapping] = true;
 		ring->stopped = true;
 		if (b43_debug(dev, B43_DBG_DMAVERBOSE)) {
 			b43dbg(dev->wl, "Stopped TX ring %d\n", ring->index);
@@ -1566,7 +1566,7 @@ void b43_dma_handle_txstatus(struct b43_wldev *dev,
 	}
 
 	if (dev->wl->tx_queue_stopped[ring->queue_prio]) {
-		dev->wl->tx_queue_stopped[ring->queue_prio] = 0;
+		dev->wl->tx_queue_stopped[ring->queue_prio] = false;
 	} else {
 		/* If the driver queue is running wake the corresponding
 		 * mac80211 queue. */
diff --git a/drivers/net/wireless/broadcom/b43/main.c b/drivers/net/wireless/broadcom/b43/main.c
index b85603e91c7a..39da1a4c30ac 100644
--- a/drivers/net/wireless/broadcom/b43/main.c
+++ b/drivers/net/wireless/broadcom/b43/main.c
@@ -3600,7 +3600,7 @@ static void b43_tx_work(struct work_struct *work)
 			else
 				err = b43_dma_tx(dev, skb);
 			if (err == -ENOSPC) {
-				wl->tx_queue_stopped[queue_num] = 1;
+				wl->tx_queue_stopped[queue_num] = true;
 				ieee80211_stop_queue(wl->hw, queue_num);
 				skb_queue_head(&wl->tx_queue[queue_num], skb);
 				break;
@@ -3611,7 +3611,7 @@ static void b43_tx_work(struct work_struct *work)
 		}
 
 		if (!err)
-			wl->tx_queue_stopped[queue_num] = 0;
+			wl->tx_queue_stopped[queue_num] = false;
 	}
 
 #if B43_DEBUG
@@ -5603,7 +5603,7 @@ static struct b43_wl *b43_wireless_init(struct b43_bus_dev *dev)
 	/* Initialize queues and flags. */
 	for (queue_num = 0; queue_num < B43_QOS_QUEUE_NUM; queue_num++) {
 		skb_queue_head_init(&wl->tx_queue[queue_num]);
-		wl->tx_queue_stopped[queue_num] = 0;
+		wl->tx_queue_stopped[queue_num] = false;
 	}
 
 	snprintf(chip_name, ARRAY_SIZE(chip_name),
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
index fc12598b2dd3..96fd8e2bf773 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
@@ -1108,7 +1108,8 @@ static int brcmf_ops_sdio_suspend(struct device *dev)
 	struct sdio_func *func;
 	struct brcmf_bus *bus_if;
 	struct brcmf_sdio_dev *sdiodev;
-	mmc_pm_flag_t sdio_flags;
+	mmc_pm_flag_t pm_caps, sdio_flags;
+	int ret = 0;
 
 	func = container_of(dev, struct sdio_func, dev);
 	brcmf_dbg(SDIO, "Enter: F%d\n", func->num);
@@ -1119,19 +1120,33 @@ static int brcmf_ops_sdio_suspend(struct device *dev)
 	bus_if = dev_get_drvdata(dev);
 	sdiodev = bus_if->bus_priv.sdio;
 
-	brcmf_sdiod_freezer_on(sdiodev);
-	brcmf_sdio_wd_timer(sdiodev->bus, 0);
+	pm_caps = sdio_get_host_pm_caps(func);
+
+	if (pm_caps & MMC_PM_KEEP_POWER) {
+		/* preserve card power during suspend */
+		brcmf_sdiod_freezer_on(sdiodev);
+		brcmf_sdio_wd_timer(sdiodev->bus, 0);
+
+		sdio_flags = MMC_PM_KEEP_POWER;
+		if (sdiodev->wowl_enabled) {
+			if (sdiodev->settings->bus.sdio.oob_irq_supported)
+				enable_irq_wake(sdiodev->settings->bus.sdio.oob_irq_nr);
+			else
+				sdio_flags |= MMC_PM_WAKE_SDIO_IRQ;
+		}
+
+		if (sdio_set_host_pm_flags(sdiodev->func1, sdio_flags))
+			brcmf_err("Failed to set pm_flags %x\n", sdio_flags);
 
-	sdio_flags = MMC_PM_KEEP_POWER;
-	if (sdiodev->wowl_enabled) {
-		if (sdiodev->settings->bus.sdio.oob_irq_supported)
-			enable_irq_wake(sdiodev->settings->bus.sdio.oob_irq_nr);
-		else
-			sdio_flags |= MMC_PM_WAKE_SDIO_IRQ;
+	} else {
+		/* power will be cut so remove device, probe again in resume */
+		brcmf_sdiod_intr_unregister(sdiodev);
+		ret = brcmf_sdiod_remove(sdiodev);
+		if (ret)
+			brcmf_err("Failed to remove device on suspend\n");
 	}
-	if (sdio_set_host_pm_flags(sdiodev->func1, sdio_flags))
-		brcmf_err("Failed to set pm_flags %x\n", sdio_flags);
-	return 0;
+
+	return ret;
 }
 
 static int brcmf_ops_sdio_resume(struct device *dev)
@@ -1139,13 +1154,23 @@ static int brcmf_ops_sdio_resume(struct device *dev)
 	struct brcmf_bus *bus_if = dev_get_drvdata(dev);
 	struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
 	struct sdio_func *func = container_of(dev, struct sdio_func, dev);
+	mmc_pm_flag_t pm_caps = sdio_get_host_pm_caps(func);
+	int ret = 0;
 
 	brcmf_dbg(SDIO, "Enter: F%d\n", func->num);
 	if (func->num != 2)
 		return 0;
 
-	brcmf_sdiod_freezer_off(sdiodev);
-	return 0;
+	if (!(pm_caps & MMC_PM_KEEP_POWER)) {
+		/* bus was powered off and device removed, probe again */
+		ret = brcmf_sdiod_probe(sdiodev);
+		if (ret)
+			brcmf_err("Failed to probe device on resume\n");
+	} else {
+		brcmf_sdiod_freezer_off(sdiodev);
+	}
+
+	return ret;
 }
 
 static const struct dev_pm_ops brcmf_sdio_pm_ops = {
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
index e3ebb7abbdae..5598bbd09b62 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -1282,6 +1282,31 @@ static int brcmf_set_pmk(struct brcmf_if *ifp, const u8 *pmk_data, u16 pmk_len)
 	return err;
 }
 
+static int brcmf_set_sae_password(struct brcmf_if *ifp, const u8 *pwd_data,
+				  u16 pwd_len)
+{
+	struct brcmf_pub *drvr = ifp->drvr;
+	struct brcmf_wsec_sae_pwd_le sae_pwd;
+	int err;
+
+	if (pwd_len > BRCMF_WSEC_MAX_SAE_PASSWORD_LEN) {
+		bphy_err(drvr, "sae_password must be less than %d\n",
+			 BRCMF_WSEC_MAX_SAE_PASSWORD_LEN);
+		return -EINVAL;
+	}
+
+	sae_pwd.key_len = cpu_to_le16(pwd_len);
+	memcpy(sae_pwd.key, pwd_data, pwd_len);
+
+	err = brcmf_fil_iovar_data_set(ifp, "sae_password", &sae_pwd,
+				       sizeof(sae_pwd));
+	if (err < 0)
+		bphy_err(drvr, "failed to set SAE password in firmware (len=%u)\n",
+			 pwd_len);
+
+	return err;
+}
+
 static void brcmf_link_down(struct brcmf_cfg80211_vif *vif, u16 reason)
 {
 	struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(vif->wdev.wiphy);
@@ -1505,6 +1530,8 @@ static s32 brcmf_set_wpa_version(struct net_device *ndev,
 		val = WPA_AUTH_PSK | WPA_AUTH_UNSPECIFIED;
 	else if (sme->crypto.wpa_versions & NL80211_WPA_VERSION_2)
 		val = WPA2_AUTH_PSK | WPA2_AUTH_UNSPECIFIED;
+	else if (sme->crypto.wpa_versions & NL80211_WPA_VERSION_3)
+		val = WPA3_AUTH_SAE_PSK;
 	else
 		val = WPA_AUTH_DISABLED;
 	brcmf_dbg(CONN, "setting wpa_auth to 0x%0x\n", val);
@@ -1537,6 +1564,10 @@ static s32 brcmf_set_auth_type(struct net_device *ndev,
 		val = 1;
 		brcmf_dbg(CONN, "shared key\n");
 		break;
+	case NL80211_AUTHTYPE_SAE:
+		val = 3;
+		brcmf_dbg(CONN, "SAE authentication\n");
+		break;
 	default:
 		val = 2;
 		brcmf_dbg(CONN, "automatic, auth type (%d)\n", sme->auth_type);
@@ -1647,6 +1678,7 @@ brcmf_set_key_mgmt(struct net_device *ndev, struct cfg80211_connect_params *sme)
 	u16 count;
 
 	profile->use_fwsup = BRCMF_PROFILE_FWSUP_NONE;
+	profile->is_ft = false;
 
 	if (!sme->crypto.n_akm_suites)
 		return 0;
@@ -1691,11 +1723,23 @@ brcmf_set_key_mgmt(struct net_device *ndev, struct cfg80211_connect_params *sme)
 			break;
 		case WLAN_AKM_SUITE_FT_8021X:
 			val = WPA2_AUTH_UNSPECIFIED | WPA2_AUTH_FT;
+			profile->is_ft = true;
 			if (sme->want_1x)
 				profile->use_fwsup = BRCMF_PROFILE_FWSUP_1X;
 			break;
 		case WLAN_AKM_SUITE_FT_PSK:
 			val = WPA2_AUTH_PSK | WPA2_AUTH_FT;
+			profile->is_ft = true;
+			break;
+		default:
+			bphy_err(drvr, "invalid cipher group (%d)\n",
+				 sme->crypto.cipher_group);
+			return -EINVAL;
+		}
+	} else if (val & WPA3_AUTH_SAE_PSK) {
+		switch (sme->crypto.akm_suites[0]) {
+		case WLAN_AKM_SUITE_SAE:
+			val = WPA3_AUTH_SAE_PSK;
 			break;
 		default:
 			bphy_err(drvr, "invalid cipher group (%d)\n",
@@ -1773,7 +1817,8 @@ brcmf_set_sharedkey(struct net_device *ndev,
 	brcmf_dbg(CONN, "wpa_versions 0x%x cipher_pairwise 0x%x\n",
 		  sec->wpa_versions, sec->cipher_pairwise);
 
-	if (sec->wpa_versions & (NL80211_WPA_VERSION_1 | NL80211_WPA_VERSION_2))
+	if (sec->wpa_versions & (NL80211_WPA_VERSION_1 | NL80211_WPA_VERSION_2 |
+				 NL80211_WPA_VERSION_3))
 		return 0;
 
 	if (!(sec->cipher_pairwise &
@@ -1980,7 +2025,13 @@ brcmf_cfg80211_connect(struct wiphy *wiphy, struct net_device *ndev,
 		goto done;
 	}
 
-	if (sme->crypto.psk) {
+	if (sme->crypto.sae_pwd) {
+		brcmf_dbg(INFO, "using SAE offload\n");
+		profile->use_fwsup = BRCMF_PROFILE_FWSUP_SAE;
+	}
+
+	if (sme->crypto.psk &&
+	    profile->use_fwsup != BRCMF_PROFILE_FWSUP_SAE) {
 		if (WARN_ON(profile->use_fwsup != BRCMF_PROFILE_FWSUP_NONE)) {
 			err = -EINVAL;
 			goto done;
@@ -1998,12 +2049,23 @@ brcmf_cfg80211_connect(struct wiphy *wiphy, struct net_device *ndev,
 		}
 	}
 
-	if (profile->use_fwsup == BRCMF_PROFILE_FWSUP_PSK) {
+	if (profile->use_fwsup == BRCMF_PROFILE_FWSUP_PSK)
 		err = brcmf_set_pmk(ifp, sme->crypto.psk,
 				    BRCMF_WSEC_MAX_PSK_LEN);
-		if (err)
+	else if (profile->use_fwsup == BRCMF_PROFILE_FWSUP_SAE) {
+		/* clean up user-space RSNE */
+		if (brcmf_fil_iovar_data_set(ifp, "wpaie", NULL, 0)) {
+			bphy_err(drvr, "failed to clean up user-space RSNE\n");
 			goto done;
+		}
+		err = brcmf_set_sae_password(ifp, sme->crypto.sae_pwd,
+					     sme->crypto.sae_pwd_len);
+		if (!err && sme->crypto.psk)
+			err = brcmf_set_pmk(ifp, sme->crypto.psk,
+					    BRCMF_WSEC_MAX_PSK_LEN);
 	}
+	if (err)
+		goto done;
 
 	/* Join with specific BSSID and cached SSID
 	 * If SSID is zero join based on BSSID only
@@ -5359,7 +5421,8 @@ static bool brcmf_is_linkup(struct brcmf_cfg80211_vif *vif,
 	if (event == BRCMF_E_SET_SSID && status == BRCMF_E_STATUS_SUCCESS) {
 		brcmf_dbg(CONN, "Processing set ssid\n");
 		memcpy(vif->profile.bssid, e->addr, ETH_ALEN);
-		if (vif->profile.use_fwsup != BRCMF_PROFILE_FWSUP_PSK)
+		if (vif->profile.use_fwsup != BRCMF_PROFILE_FWSUP_PSK &&
+		    vif->profile.use_fwsup != BRCMF_PROFILE_FWSUP_SAE)
 			return true;
 
 		set_bit(BRCMF_VIF_STATUS_ASSOC_SUCCESS, &vif->sme_state);
@@ -5554,6 +5617,11 @@ done:
 	cfg80211_roamed(ndev, &roam_info, GFP_KERNEL);
 	brcmf_dbg(CONN, "Report roaming result\n");
 
+	if (profile->use_fwsup == BRCMF_PROFILE_FWSUP_1X && profile->is_ft) {
+		cfg80211_port_authorized(ndev, profile->bssid, GFP_KERNEL);
+		brcmf_dbg(CONN, "Report port authorized\n");
+	}
+
 	set_bit(BRCMF_VIF_STATUS_CONNECTED, &ifp->vif->sme_state);
 	brcmf_dbg(TRACE, "Exit\n");
 	return err;
@@ -6664,6 +6732,9 @@ static int brcmf_setup_wiphy(struct wiphy *wiphy, struct brcmf_if *ifp)
 				      NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK);
 		wiphy_ext_feature_set(wiphy,
 				      NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X);
+		if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_SAE))
+			wiphy_ext_feature_set(wiphy,
+					      NL80211_EXT_FEATURE_SAE_OFFLOAD);
 	}
 	wiphy->mgmt_stypes = brcmf_txrx_stypes;
 	wiphy->max_remain_on_channel_duration = 5000;
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h
index 14d5bbad1db1..6ce48f6275a4 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h
@@ -107,7 +107,8 @@ struct brcmf_cfg80211_security {
 enum brcmf_profile_fwsup {
 	BRCMF_PROFILE_FWSUP_NONE,
 	BRCMF_PROFILE_FWSUP_PSK,
-	BRCMF_PROFILE_FWSUP_1X
+	BRCMF_PROFILE_FWSUP_1X,
+	BRCMF_PROFILE_FWSUP_SAE
 };
 
 /**
@@ -122,6 +123,7 @@ struct brcmf_cfg80211_profile {
 	struct brcmf_cfg80211_security sec;
 	struct brcmf_wsec_key key[BRCMF_MAX_DEFAULT_KEYS];
 	enum brcmf_profile_fwsup use_fwsup;
+	bool is_ft;
 };
 
 /**
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c
index dd586a96b57a..a795d781b4c5 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c
@@ -778,7 +778,6 @@ static int brcmf_chip_dmp_get_regaddr(struct brcmf_chip_priv *ci, u32 *eromaddr,
 {
 	u8 desc;
 	u32 val, szdesc;
-	u8 mpnum = 0;
 	u8 stype, sztype, wraptype;
 
 	*regbase = 0;
@@ -786,7 +785,6 @@ static int brcmf_chip_dmp_get_regaddr(struct brcmf_chip_priv *ci, u32 *eromaddr,
 
 	val = brcmf_chip_dmp_get_desc(ci, eromaddr, &desc);
 	if (desc == DMP_DESC_MASTER_PORT) {
-		mpnum = (val & DMP_MASTER_PORT_NUM) >> DMP_MASTER_PORT_NUM_S;
 		wraptype = DMP_SLAVE_TYPE_MWRAP;
 	} else if (desc == DMP_DESC_ADDRESS) {
 		/* revert erom address */
@@ -854,7 +852,7 @@ int brcmf_chip_dmp_erom_scan(struct brcmf_chip_priv *ci)
 	u8 desc_type = 0;
 	u32 val;
 	u16 id;
-	u8 nmp, nsp, nmw, nsw, rev;
+	u8 nmw, nsw, rev;
 	u32 base, wrap;
 	int err;
 
@@ -880,8 +878,6 @@ int brcmf_chip_dmp_erom_scan(struct brcmf_chip_priv *ci)
 			return -EFAULT;
 
 		/* only look at cores with master port(s) */
-		nmp = (val & DMP_COMP_NUM_MPORT) >> DMP_COMP_NUM_MPORT_S;
-		nsp = (val & DMP_COMP_NUM_SPORT) >> DMP_COMP_NUM_SPORT_S;
 		nmw = (val & DMP_COMP_NUM_MWRAP) >> DMP_COMP_NUM_MWRAP_S;
 		nsw = (val & DMP_COMP_NUM_SWRAP) >> DMP_COMP_NUM_SWRAP_S;
 		rev = (val & DMP_COMP_REVISION) >> DMP_COMP_REVISION_S;
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
index 406b367c284c..85cf96461dde 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
@@ -1350,6 +1350,11 @@ void brcmf_detach(struct device *dev)
 	brcmf_fweh_detach(drvr);
 	brcmf_proto_detach(drvr);
 
+	if (drvr->mon_if) {
+		brcmf_net_detach(drvr->mon_if->ndev, false);
+		drvr->mon_if = NULL;
+	}
+
 	/* make sure primary interface removed last */
 	for (i = BRCMF_MAX_IFS - 1; i > -1; i--) {
 		if (drvr->iflist[i])
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c
index 2c3526aeca6f..1c9c74cc958e 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c
@@ -39,7 +39,8 @@ static const struct brcmf_feat_fwcap brcmf_fwcap_map[] = {
 	{ BRCMF_FEAT_P2P, "p2p" },
 	{ BRCMF_FEAT_MONITOR, "monitor" },
 	{ BRCMF_FEAT_MONITOR_FMT_RADIOTAP, "rtap" },
-	{ BRCMF_FEAT_DOT11H, "802.11h" }
+	{ BRCMF_FEAT_DOT11H, "802.11h" },
+	{ BRCMF_FEAT_SAE, "sae" },
 };
 
 #ifdef DEBUG
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.h
index 736a8179f62f..280a1f6412d4 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.h
@@ -26,6 +26,7 @@
  * MONITOR_FMT_RADIOTAP: firmware provides monitor packets with radiotap header
  * MONITOR_FMT_HW_RX_HDR: firmware provides monitor packets with hw/ucode header
  * DOT11H: firmware supports 802.11h
+ * SAE: simultaneous authentication of equals
  */
 #define BRCMF_FEAT_LIST \
 	BRCMF_FEAT_DEF(MBSS) \
@@ -45,7 +46,8 @@
 	BRCMF_FEAT_DEF(MONITOR) \
 	BRCMF_FEAT_DEF(MONITOR_FMT_RADIOTAP) \
 	BRCMF_FEAT_DEF(MONITOR_FMT_HW_RX_HDR) \
-	BRCMF_FEAT_DEF(DOT11H)
+	BRCMF_FEAT_DEF(DOT11H) \
+	BRCMF_FEAT_DEF(SAE)
 
 /*
  * Quirks:
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h
index 37c512036e0e..de0ef1b545c4 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h
@@ -61,6 +61,8 @@
 #define BRCMF_WSEC_MAX_PSK_LEN		32
 #define	BRCMF_WSEC_PASSPHRASE		BIT(0)
 
+#define BRCMF_WSEC_MAX_SAE_PASSWORD_LEN 128
+
 /* primary (ie tx) key */
 #define BRCMF_PRIMARY_KEY		(1 << 1)
 #define DOT11_BSSTYPE_ANY		2
@@ -518,6 +520,17 @@ struct brcmf_wsec_pmk_le {
 	u8 key[2 * BRCMF_WSEC_MAX_PSK_LEN + 1];
 };
 
+/**
+ * struct brcmf_wsec_sae_pwd_le - firmware SAE password material.
+ *
+ * @key_len: number of octets in key materials.
+ * @key: SAE password material.
+ */
+struct brcmf_wsec_sae_pwd_le {
+	__le16 key_len;
+	u8 key[BRCMF_WSEC_MAX_SAE_PASSWORD_LEN];
+};
+
 /* Used to get specific STA parameters */
 struct brcmf_scb_val_le {
 	__le32 val;
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
index 6c463475e90b..f64ce5074a55 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
@@ -1024,8 +1024,6 @@ brcmf_pcie_init_dmabuffer_for_device(struct brcmf_pciedev_info *devinfo,
 			       address & 0xffffffff);
 	brcmf_pcie_write_tcm32(devinfo, tcm_dma_phys_addr + 4, address >> 32);
 
-	memset(ring, 0, size);
-
 	return (ring);
 }
 
@@ -1427,6 +1425,8 @@ static int brcmf_pcie_reset(struct device *dev)
 	struct brcmf_fw_request *fwreq;
 	int err;
 
+	brcmf_pcie_intr_disable(devinfo);
+
 	brcmf_pcie_bus_console_read(devinfo, true);
 
 	brcmf_detach(dev);
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.c
index 14e530601ef3..fabfbb0b40b0 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.c
@@ -57,6 +57,10 @@ static int brcmf_pno_remove_request(struct brcmf_pno_info *pi, u64 reqid)
 
 	mutex_lock(&pi->req_lock);
 
+	/* Nothing to do if we have no requests */
+	if (pi->n_reqs == 0)
+		goto done;
+
 	/* find request */
 	for (i = 0; i < pi->n_reqs; i++) {
 		if (pi->reqs[i]->reqid == reqid)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/channel.c b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/channel.c
index db783e94f929..5a6d9c86552a 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/channel.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/channel.c
@@ -496,13 +496,11 @@ brcms_c_channel_reg_limits(struct brcms_cm_info *wlc_cm, u16 chanspec,
 	 * table and override CDD later
 	 */
 	if (li_mimo == &locale_bn) {
-		if (li_mimo == &locale_bn) {
-			maxpwr20 = QDB(16);
-			maxpwr40 = 0;
+		maxpwr20 = QDB(16);
+		maxpwr40 = 0;
 
-			if (chan >= 3 && chan <= 11)
-				maxpwr40 = QDB(16);
-		}
+		if (chan >= 3 && chan <= 11)
+			maxpwr40 = QDB(16);
 
 		for (i = 0; i < BRCMS_NUM_RATES_MCS_1_STREAM; i++) {
 			txpwr->mcs_20_siso[i] = (u8) maxpwr20;
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c
index 6188275b17e5..8e8b685cfe09 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c
@@ -850,8 +850,7 @@ brcms_ops_ampdu_action(struct ieee80211_hw *hw,
 				     "START: tid %d is not agg\'able\n", tid);
 			return -EINVAL;
 		}
-		ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid);
-		break;
+		return IEEE80211_AMPDU_TX_START_IMMEDIATE;
 
 	case IEEE80211_AMPDU_TX_STOP_CONT:
 	case IEEE80211_AMPDU_TX_STOP_FLUSH:
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/main.c b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/main.c
index 080e829da9b3..3f09d89ba922 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/main.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/main.c
@@ -838,9 +838,8 @@ brcms_c_dotxstatus(struct brcms_c_info *wlc, struct tx_status *txs)
 	struct dma_pub *dma = NULL;
 	struct d11txh *txh = NULL;
 	struct scb *scb = NULL;
-	bool free_pdu;
-	int tx_rts, tx_frame_count, tx_rts_count;
-	uint totlen, supr_status;
+	int tx_frame_count;
+	uint supr_status;
 	bool lastframe;
 	struct ieee80211_hdr *h;
 	u16 mcl;
@@ -917,11 +916,8 @@ brcms_c_dotxstatus(struct brcms_c_info *wlc, struct tx_status *txs)
 			     CHSPEC_CHANNEL(wlc->default_bss->chanspec));
 	}
 
-	tx_rts = le16_to_cpu(txh->MacTxControlLow) & TXC_SENDRTS;
 	tx_frame_count =
 	    (txs->status & TX_STATUS_FRM_RTX_MASK) >> TX_STATUS_FRM_RTX_SHIFT;
-	tx_rts_count =
-	    (txs->status & TX_STATUS_RTS_RTX_MASK) >> TX_STATUS_RTS_RTX_SHIFT;
 
 	lastframe = !ieee80211_has_morefrags(h->frame_control);
 
@@ -989,9 +985,6 @@ brcms_c_dotxstatus(struct brcms_c_info *wlc, struct tx_status *txs)
 			tx_info->flags |= IEEE80211_TX_STAT_ACK;
 	}
 
-	totlen = p->len;
-	free_pdu = true;
-
 	if (lastframe) {
 		/* remove PLCP & Broadcom tx descriptor header */
 		skb_pull(p, D11_PHY_HDR_LEN);
@@ -1816,8 +1809,7 @@ void brcms_b_phy_reset(struct brcms_hardware *wlc_hw)
 	udelay(2);
 	brcms_b_core_phy_clk(wlc_hw, ON);
 
-	if (pih)
-		wlc_phy_anacore(pih, ON);
+	wlc_phy_anacore(pih, ON);
 }
 
 /* switch to and initialize new band */
@@ -7384,9 +7376,7 @@ static void brcms_c_update_beacon_hw(struct brcms_c_info *wlc,
 				     false, true);
 		/* mark beacon0 valid */
 		bcma_set32(core, D11REGOFFS(maccommand), MCMD_BCN1VLD);
-		return;
 	}
-	return;
 }
 
 /*
diff --git a/drivers/net/wireless/broadcom/brcm80211/include/brcmu_wifi.h b/drivers/net/wireless/broadcom/brcm80211/include/brcmu_wifi.h
index 7b31c212694d..7552bdb91991 100644
--- a/drivers/net/wireless/broadcom/brcm80211/include/brcmu_wifi.h
+++ b/drivers/net/wireless/broadcom/brcm80211/include/brcmu_wifi.h
@@ -231,6 +231,8 @@ static inline bool ac_bitmap_tst(u8 bitmap, int prec)
 #define WPA2_AUTH_FT		0x4000	/* Fast BSS Transition */
 #define WPA2_AUTH_PSK_SHA256	0x8000	/* PSK with SHA256 key derivation */
 
+#define WPA3_AUTH_SAE_PSK	0x40000	/* SAE with 4-way handshake */
+
 #define DOT11_DEFAULT_RTS_LEN		2347
 #define DOT11_DEFAULT_FRAG_LEN		2346