Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking changes from David Miller:

1) Allow to dump, monitor, and change the bridge multicast database
   using netlink.  From Cong Wang.

2) RFC 5961 TCP blind data injection attack mitigation, from Eric
   Dumazet.

3) Networking user namespace support from Eric W. Biederman.

4) tuntap/virtio-net multiqueue support by Jason Wang.

5) Support for checksum offload of encapsulated packets (basically,
   tunneled traffic can still be checksummed by HW).  From Joseph
   Gasparakis.

6) Allow BPF filter access to VLAN tags, from Eric Dumazet and
   Daniel Borkmann.

7) Bridge port parameters over netlink and BPDU blocking support
   from Stephen Hemminger.

8) Improve data access patterns during inet socket demux by rearranging
   socket layout, from Eric Dumazet.

9) TIPC protocol updates and cleanups from Ying Xue, Paul Gortmaker, and
   Jon Maloy.

10) Update TCP socket hash sizing to be more in line with current day
    realities.  The existing heurstics were choosen a decade ago.
    From Eric Dumazet.

11) Fix races, queue bloat, and excessive wakeups in ATM and
    associated drivers, from Krzysztof Mazur and David Woodhouse.

12) Support DOVE (Distributed Overlay Virtual Ethernet) extensions
    in VXLAN driver, from David Stevens.

13) Add "oops_only" mode to netconsole, from Amerigo Wang.

14) Support set and query of VEB/VEPA bridge mode via PF_BRIDGE, also
    allow DCB netlink to work on namespaces other than the initial
    namespace.  From John Fastabend.

15) Support PTP in the Tigon3 driver, from Matt Carlson.

16) tun/vhost zero copy fixes and improvements, plus turn it on
    by default, from Michael S. Tsirkin.

17) Support per-association statistics in SCTP, from Michele
    Baldessari.

And many, many, driver updates, cleanups, and improvements.  Too
numerous to mention individually.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1722 commits)
  net/mlx4_en: Add support for destination MAC in steering rules
  net/mlx4_en: Use generic etherdevice.h functions.
  net: ethtool: Add destination MAC address to flow steering API
  bridge: add support of adding and deleting mdb entries
  bridge: notify mdb changes via netlink
  ndisc: Unexport ndisc_{build,send}_skb().
  uapi: add missing netconf.h to export list
  pkt_sched: avoid requeues if possible
  solos-pci: fix double-free of TX skb in DMA mode
  bnx2: Fix accidental reversions.
  bna: Driver Version Updated to 3.1.2.1
  bna: Firmware update
  bna: Add RX State
  bna: Rx Page Based Allocation
  bna: TX Intr Coalescing Fix
  bna: Tx and Rx Optimizations
  bna: Code Cleanup and Enhancements
  ath9k: check pdata variable before dereferencing it
  ath5k: RX timestamp is reported at end of frame
  ath9k_htc: RX timestamp is reported at end of frame
  ...

1 files changed, 47 insertions, 94 deletions

diff --git a/drivers/net/ethernet/intel/e1000e/phy.c b/drivers/net/ethernet/intel/e1000e/phy.c
index fc62a3f3a5be..28b38ff37e84 100644
--- a/drivers/net/ethernet/intel/e1000e/phy.c
+++ b/drivers/net/ethernet/intel/e1000e/phy.c
@@ -193,8 +193,7 @@ s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
 		return -E1000_ERR_PARAM;
 	}
 
-	/*
-	 * Set up Op-code, Phy Address, and register offset in the MDI
+	/* Set up Op-code, Phy Address, and register offset in the MDI
 	 * Control register.  The MAC will take care of interfacing with the
 	 * PHY to retrieve the desired data.
 	 */
@@ -204,8 +203,7 @@ s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
 
 	ew32(MDIC, mdic);
 
-	/*
-	 * Poll the ready bit to see if the MDI read completed
+	/* Poll the ready bit to see if the MDI read completed
 	 * Increasing the time out as testing showed failures with
 	 * the lower time out
 	 */
@@ -225,8 +223,7 @@ s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
 	}
 	*data = (u16) mdic;
 
-	/*
-	 * Allow some time after each MDIC transaction to avoid
+	/* Allow some time after each MDIC transaction to avoid
 	 * reading duplicate data in the next MDIC transaction.
 	 */
 	if (hw->mac.type == e1000_pch2lan)
@@ -253,8 +250,7 @@ s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
 		return -E1000_ERR_PARAM;
 	}
 
-	/*
-	 * Set up Op-code, Phy Address, and register offset in the MDI
+	/* Set up Op-code, Phy Address, and register offset in the MDI
 	 * Control register.  The MAC will take care of interfacing with the
 	 * PHY to retrieve the desired data.
 	 */
@@ -265,8 +261,7 @@ s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
 
 	ew32(MDIC, mdic);
 
-	/*
-	 * Poll the ready bit to see if the MDI read completed
+	/* Poll the ready bit to see if the MDI read completed
 	 * Increasing the time out as testing showed failures with
 	 * the lower time out
 	 */
@@ -285,8 +280,7 @@ s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
 		return -E1000_ERR_PHY;
 	}
 
-	/*
-	 * Allow some time after each MDIC transaction to avoid
+	/* Allow some time after each MDIC transaction to avoid
 	 * reading duplicate data in the next MDIC transaction.
 	 */
 	if (hw->mac.type == e1000_pch2lan)
@@ -708,8 +702,7 @@ s32 e1000_copper_link_setup_82577(struct e1000_hw *hw)
 	if (ret_val)
 		return ret_val;
 	phy_data &= ~I82577_PHY_CTRL2_MDIX_CFG_MASK;
-	/*
-	 * Options:
+	/* Options:
 	 *   0 - Auto (default)
 	 *   1 - MDI mode
 	 *   2 - MDI-X mode
@@ -754,8 +747,7 @@ s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw)
 	if (phy->type != e1000_phy_bm)
 		phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
 
-	/*
-	 * Options:
+	/* Options:
 	 *   MDI/MDI-X = 0 (default)
 	 *   0 - Auto for all speeds
 	 *   1 - MDI mode
@@ -780,8 +772,7 @@ s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw)
 		break;
 	}
 
-	/*
-	 * Options:
+	/* Options:
 	 *   disable_polarity_correction = 0 (default)
 	 *       Automatic Correction for Reversed Cable Polarity
 	 *   0 - Disabled
@@ -818,8 +809,7 @@ s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw)
 	if ((phy->type == e1000_phy_m88) &&
 	    (phy->revision < E1000_REVISION_4) &&
 	    (phy->id != BME1000_E_PHY_ID_R2)) {
-		/*
-		 * Force TX_CLK in the Extended PHY Specific Control Register
+		/* Force TX_CLK in the Extended PHY Specific Control Register
 		 * to 25MHz clock.
 		 */
 		ret_val = e1e_rphy(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data);
@@ -899,8 +889,7 @@ s32 e1000e_copper_link_setup_igp(struct e1000_hw *hw)
 		return ret_val;
 	}
 
-	/*
-	 * Wait 100ms for MAC to configure PHY from NVM settings, to avoid
+	/* Wait 100ms for MAC to configure PHY from NVM settings, to avoid
 	 * timeout issues when LFS is enabled.
 	 */
 	msleep(100);
@@ -936,8 +925,7 @@ s32 e1000e_copper_link_setup_igp(struct e1000_hw *hw)
 
 	/* set auto-master slave resolution settings */
 	if (hw->mac.autoneg) {
-		/*
-		 * when autonegotiation advertisement is only 1000Mbps then we
+		/* when autonegotiation advertisement is only 1000Mbps then we
 		 * should disable SmartSpeed and enable Auto MasterSlave
 		 * resolution as hardware default.
 		 */
@@ -1001,16 +989,14 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw)
 			return ret_val;
 	}
 
-	/*
-	 * Need to parse both autoneg_advertised and fc and set up
+	/* Need to parse both autoneg_advertised and fc and set up
 	 * the appropriate PHY registers.  First we will parse for
 	 * autoneg_advertised software override.  Since we can advertise
 	 * a plethora of combinations, we need to check each bit
 	 * individually.
 	 */
 
-	/*
-	 * First we clear all the 10/100 mb speed bits in the Auto-Neg
+	/* First we clear all the 10/100 mb speed bits in the Auto-Neg
 	 * Advertisement Register (Address 4) and the 1000 mb speed bits in
 	 * the  1000Base-T Control Register (Address 9).
 	 */
@@ -1056,8 +1042,7 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw)
 		mii_1000t_ctrl_reg |= CR_1000T_FD_CAPS;
 	}
 
-	/*
-	 * Check for a software override of the flow control settings, and
+	/* Check for a software override of the flow control settings, and
 	 * setup the PHY advertisement registers accordingly.  If
 	 * auto-negotiation is enabled, then software will have to set the
 	 * "PAUSE" bits to the correct value in the Auto-Negotiation
@@ -1076,15 +1061,13 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw)
 	 */
 	switch (hw->fc.current_mode) {
 	case e1000_fc_none:
-		/*
-		 * Flow control (Rx & Tx) is completely disabled by a
+		/* Flow control (Rx & Tx) is completely disabled by a
 		 * software over-ride.
 		 */
 		mii_autoneg_adv_reg &= ~(NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
 		break;
 	case e1000_fc_rx_pause:
-		/*
-		 * Rx Flow control is enabled, and Tx Flow control is
+		/* Rx Flow control is enabled, and Tx Flow control is
 		 * disabled, by a software over-ride.
 		 *
 		 * Since there really isn't a way to advertise that we are
@@ -1096,16 +1079,14 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw)
 		mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
 		break;
 	case e1000_fc_tx_pause:
-		/*
-		 * Tx Flow control is enabled, and Rx Flow control is
+		/* Tx Flow control is enabled, and Rx Flow control is
 		 * disabled, by a software over-ride.
 		 */
 		mii_autoneg_adv_reg |= NWAY_AR_ASM_DIR;
 		mii_autoneg_adv_reg &= ~NWAY_AR_PAUSE;
 		break;
 	case e1000_fc_full:
-		/*
-		 * Flow control (both Rx and Tx) is enabled by a software
+		/* Flow control (both Rx and Tx) is enabled by a software
 		 * over-ride.
 		 */
 		mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
@@ -1142,14 +1123,12 @@ static s32 e1000_copper_link_autoneg(struct e1000_hw *hw)
 	s32 ret_val;
 	u16 phy_ctrl;
 
-	/*
-	 * Perform some bounds checking on the autoneg advertisement
+	/* Perform some bounds checking on the autoneg advertisement
 	 * parameter.
 	 */
 	phy->autoneg_advertised &= phy->autoneg_mask;
 
-	/*
-	 * If autoneg_advertised is zero, we assume it was not defaulted
+	/* If autoneg_advertised is zero, we assume it was not defaulted
 	 * by the calling code so we set to advertise full capability.
 	 */
 	if (!phy->autoneg_advertised)
@@ -1163,8 +1142,7 @@ static s32 e1000_copper_link_autoneg(struct e1000_hw *hw)
 	}
 	e_dbg("Restarting Auto-Neg\n");
 
-	/*
-	 * Restart auto-negotiation by setting the Auto Neg Enable bit and
+	/* Restart auto-negotiation by setting the Auto Neg Enable bit and
 	 * the Auto Neg Restart bit in the PHY control register.
 	 */
 	ret_val = e1e_rphy(hw, PHY_CONTROL, &phy_ctrl);
@@ -1176,8 +1154,7 @@ static s32 e1000_copper_link_autoneg(struct e1000_hw *hw)
 	if (ret_val)
 		return ret_val;
 
-	/*
-	 * Does the user want to wait for Auto-Neg to complete here, or
+	/* Does the user want to wait for Auto-Neg to complete here, or
 	 * check at a later time (for example, callback routine).
 	 */
 	if (phy->autoneg_wait_to_complete) {
@@ -1208,16 +1185,14 @@ s32 e1000e_setup_copper_link(struct e1000_hw *hw)
 	bool link;
 
 	if (hw->mac.autoneg) {
-		/*
-		 * Setup autoneg and flow control advertisement and perform
+		/* Setup autoneg and flow control advertisement and perform
 		 * autonegotiation.
 		 */
 		ret_val = e1000_copper_link_autoneg(hw);
 		if (ret_val)
 			return ret_val;
 	} else {
-		/*
-		 * PHY will be set to 10H, 10F, 100H or 100F
+		/* PHY will be set to 10H, 10F, 100H or 100F
 		 * depending on user settings.
 		 */
 		e_dbg("Forcing Speed and Duplex\n");
@@ -1228,8 +1203,7 @@ s32 e1000e_setup_copper_link(struct e1000_hw *hw)
 		}
 	}
 
-	/*
-	 * Check link status. Wait up to 100 microseconds for link to become
+	/* Check link status. Wait up to 100 microseconds for link to become
 	 * valid.
 	 */
 	ret_val = e1000e_phy_has_link_generic(hw, COPPER_LINK_UP_LIMIT, 10,
@@ -1273,8 +1247,7 @@ s32 e1000e_phy_force_speed_duplex_igp(struct e1000_hw *hw)
 	if (ret_val)
 		return ret_val;
 
-	/*
-	 * Clear Auto-Crossover to force MDI manually.  IGP requires MDI
+	/* Clear Auto-Crossover to force MDI manually.  IGP requires MDI
 	 * forced whenever speed and duplex are forced.
 	 */
 	ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CTRL, &phy_data);
@@ -1328,8 +1301,7 @@ s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw)
 	u16 phy_data;
 	bool link;
 
-	/*
-	 * Clear Auto-Crossover to force MDI manually.  M88E1000 requires MDI
+	/* Clear Auto-Crossover to force MDI manually.  M88E1000 requires MDI
 	 * forced whenever speed and duplex are forced.
 	 */
 	ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
@@ -1370,8 +1342,7 @@ s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw)
 			if (hw->phy.type != e1000_phy_m88) {
 				e_dbg("Link taking longer than expected.\n");
 			} else {
-				/*
-				 * We didn't get link.
+				/* We didn't get link.
 				 * Reset the DSP and cross our fingers.
 				 */
 				ret_val = e1e_wphy(hw, M88E1000_PHY_PAGE_SELECT,
@@ -1398,8 +1369,7 @@ s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw)
 	if (ret_val)
 		return ret_val;
 
-	/*
-	 * Resetting the phy means we need to re-force TX_CLK in the
+	/* Resetting the phy means we need to re-force TX_CLK in the
 	 * Extended PHY Specific Control Register to 25MHz clock from
 	 * the reset value of 2.5MHz.
 	 */
@@ -1408,8 +1378,7 @@ s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw)
 	if (ret_val)
 		return ret_val;
 
-	/*
-	 * In addition, we must re-enable CRS on Tx for both half and full
+	/* In addition, we must re-enable CRS on Tx for both half and full
 	 * duplex.
 	 */
 	ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
@@ -1573,8 +1542,7 @@ s32 e1000e_set_d3_lplu_state(struct e1000_hw *hw, bool active)
 		ret_val = e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, data);
 		if (ret_val)
 			return ret_val;
-		/*
-		 * LPLU and SmartSpeed are mutually exclusive.  LPLU is used
+		/* LPLU and SmartSpeed are mutually exclusive.  LPLU is used
 		 * during Dx states where the power conservation is most
 		 * important.  During driver activity we should enable
 		 * SmartSpeed, so performance is maintained.
@@ -1702,8 +1670,7 @@ s32 e1000_check_polarity_igp(struct e1000_hw *hw)
 	s32 ret_val;
 	u16 data, offset, mask;
 
-	/*
-	 * Polarity is determined based on the speed of
+	/* Polarity is determined based on the speed of
 	 * our connection.
 	 */
 	ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_STATUS, &data);
@@ -1715,8 +1682,7 @@ s32 e1000_check_polarity_igp(struct e1000_hw *hw)
 		offset	= IGP01E1000_PHY_PCS_INIT_REG;
 		mask	= IGP01E1000_PHY_POLARITY_MASK;
 	} else {
-		/*
-		 * This really only applies to 10Mbps since
+		/* This really only applies to 10Mbps since
 		 * there is no polarity for 100Mbps (always 0).
 		 */
 		offset	= IGP01E1000_PHY_PORT_STATUS;
@@ -1745,8 +1711,7 @@ s32 e1000_check_polarity_ife(struct e1000_hw *hw)
 	s32 ret_val;
 	u16 phy_data, offset, mask;
 
-	/*
-	 * Polarity is determined based on the reversal feature being enabled.
+	/* Polarity is determined based on the reversal feature being enabled.
 	 */
 	if (phy->polarity_correction) {
 		offset = IFE_PHY_EXTENDED_STATUS_CONTROL;
@@ -1791,8 +1756,7 @@ static s32 e1000_wait_autoneg(struct e1000_hw *hw)
 		msleep(100);
 	}
 
-	/*
-	 * PHY_AUTO_NEG_TIME expiration doesn't guarantee auto-negotiation
+	/* PHY_AUTO_NEG_TIME expiration doesn't guarantee auto-negotiation
 	 * has completed.
 	 */
 	return ret_val;
@@ -1814,15 +1778,13 @@ s32 e1000e_phy_has_link_generic(struct e1000_hw *hw, u32 iterations,
 	u16 i, phy_status;
 
 	for (i = 0; i < iterations; i++) {
-		/*
-		 * Some PHYs require the PHY_STATUS register to be read
+		/* Some PHYs require the PHY_STATUS register to be read
 		 * twice due to the link bit being sticky.  No harm doing
 		 * it across the board.
 		 */
 		ret_val = e1e_rphy(hw, PHY_STATUS, &phy_status);
 		if (ret_val)
-			/*
-			 * If the first read fails, another entity may have
+			/* If the first read fails, another entity may have
 			 * ownership of the resources, wait and try again to
 			 * see if they have relinquished the resources yet.
 			 */
@@ -1913,8 +1875,7 @@ s32 e1000e_get_cable_length_igp_2(struct e1000_hw *hw)
 		if (ret_val)
 			return ret_val;
 
-		/*
-		 * Getting bits 15:9, which represent the combination of
+		/* Getting bits 15:9, which represent the combination of
 		 * coarse and fine gain values.  The result is a number
 		 * that can be put into the lookup table to obtain the
 		 * approximate cable length.
@@ -2285,15 +2246,13 @@ s32 e1000e_phy_init_script_igp3(struct e1000_hw *hw)
 	e1e_wphy(hw, 0x1796, 0x0008);
 	/* Change cg_icount + enable integbp for channels BCD */
 	e1e_wphy(hw, 0x1798, 0xD008);
-	/*
-	 * Change cg_icount + enable integbp + change prop_factor_master
+	/* Change cg_icount + enable integbp + change prop_factor_master
 	 * to 8 for channel A
 	 */
 	e1e_wphy(hw, 0x1898, 0xD918);
 	/* Disable AHT in Slave mode on channel A */
 	e1e_wphy(hw, 0x187A, 0x0800);
-	/*
-	 * Enable LPLU and disable AN to 1000 in non-D0a states,
+	/* Enable LPLU and disable AN to 1000 in non-D0a states,
 	 * Enable SPD+B2B
 	 */
 	e1e_wphy(hw, 0x0019, 0x008D);
@@ -2417,8 +2376,7 @@ s32 e1000e_determine_phy_address(struct e1000_hw *hw)
 			e1000e_get_phy_id(hw);
 			phy_type = e1000e_get_phy_type_from_id(hw->phy.id);
 
-			/*
-			 * If phy_type is valid, break - we found our
+			/* If phy_type is valid, break - we found our
 			 * PHY address
 			 */
 			if (phy_type  != e1000_phy_unknown)
@@ -2478,8 +2436,7 @@ s32 e1000e_write_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 data)
 	if (offset > MAX_PHY_MULTI_PAGE_REG) {
 		u32 page_shift, page_select;
 
-		/*
-		 * Page select is register 31 for phy address 1 and 22 for
+		/* Page select is register 31 for phy address 1 and 22 for
 		 * phy address 2 and 3. Page select is shifted only for
 		 * phy address 1.
 		 */
@@ -2537,8 +2494,7 @@ s32 e1000e_read_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data)
 	if (offset > MAX_PHY_MULTI_PAGE_REG) {
 		u32 page_shift, page_select;
 
-		/*
-		 * Page select is register 31 for phy address 1 and 22 for
+		/* Page select is register 31 for phy address 1 and 22 for
 		 * phy address 2 and 3. Page select is shifted only for
 		 * phy address 1.
 		 */
@@ -2683,8 +2639,7 @@ s32 e1000_enable_phy_wakeup_reg_access_bm(struct e1000_hw *hw, u16 *phy_reg)
 		return ret_val;
 	}
 
-	/*
-	 * Enable both PHY wakeup mode and Wakeup register page writes.
+	/* Enable both PHY wakeup mode and Wakeup register page writes.
 	 * Prevent a power state change by disabling ME and Host PHY wakeup.
 	 */
 	temp = *phy_reg;
@@ -2698,8 +2653,7 @@ s32 e1000_enable_phy_wakeup_reg_access_bm(struct e1000_hw *hw, u16 *phy_reg)
 		return ret_val;
 	}
 
-	/*
-	 * Select Host Wakeup Registers page - caller now able to write
+	/* Select Host Wakeup Registers page - caller now able to write
 	 * registers on the Wakeup registers page
 	 */
 	return e1000_set_page_igp(hw, (BM_WUC_PAGE << IGP_PAGE_SHIFT));
@@ -3038,8 +2992,7 @@ static s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data,
 		if (page == HV_INTC_FC_PAGE_START)
 			page = 0;
 
-		/*
-		 * Workaround MDIO accesses being disabled after entering IEEE
+		/* Workaround MDIO accesses being disabled after entering IEEE
 		 * Power Down (when bit 11 of the PHY Control register is set)
 		 */
 		if ((hw->phy.type == e1000_phy_82578) &&