aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/mmc/host/wbsd.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2018-06-05 16:11:43 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2018-06-05 16:11:43 -0700
commitf60342fac9fae20ada2cd5faadbc2a1337cae03f (patch)
treefe64b1cb3ea699d819e5e808264903aee2d8dc9a /drivers/mmc/host/wbsd.c
parent5231804cf9e584f3e7e763a0d6d2fffe011c1bce (diff)
parentef5332c10d4f332a2ac79e9ad5452f4e89d1815a (diff)
downloadkernel_replicant_linux-f60342fac9fae20ada2cd5faadbc2a1337cae03f.tar.gz
kernel_replicant_linux-f60342fac9fae20ada2cd5faadbc2a1337cae03f.tar.bz2
kernel_replicant_linux-f60342fac9fae20ada2cd5faadbc2a1337cae03f.zip
Merge tag 'mmc-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson: "MMC core: - Decrease polling rate for erase/trim/discard - Allow non-sleeping GPIOs for card detect - Improve mmc block removal path - Enable support for mmc_sw_reset() for SDIO cards - Add mmc_sw_reset() to allow users to do a soft reset of the card - Allow power delay to be tunable via DT - Allow card detect debounce delay to be tunable via DT - Enable new quirk to limit clock rate for Marvell 8887 chip - Don't show eMMC RPMB and BOOT areas in /proc/partitions - Add capability to avoid 3.3V signaling for fragile HWs MMC host: - Improve/fixup support for handle highmem pages - Remove depends on HAS_DMA in case of platform dependency - mvsdio: Enable support for erase/trim/discard - rtsx_usb: Enable support for erase/trim/discard - renesas_sdhi: Fix WP logic regressions - renesas_sdhi: Add r8a77965 support - renesas_sdhi: Add R8A77980 to whitelist - meson: Add optional support for device reset - meson: Add support for the Meson-AXG platform - dw_mmc: Add new driver for BlueField DW variant - mediatek: Add support for 64G DRAM DMA - sunxi: Deploy runtime PM support - jz4740: Add support for JZ4780 - jz4740: Enable support for DT based platforms - sdhci: Various improvement to timeout handling - sdhci: Disable support for HS200/HS400/UHS when no 1.8V support - sdhci-omap: Add support for controller in k2g SoC - sdhci-omap: Add workarounds for a couple of Erratas - sdhci-omap: Enable support for generic sdhci DT properties - sdhci-cadence: Re-send tune request to deal with errata - sdhci-pci: Fix 3.3V voltage switch for some BYT-based Intel controllers - sdhci-pci: Avoid 3.3V signaling on some NI 904x - sdhci-esdhc-imx: Use watermark levels for PIO access - sdhci-msm: Improve card detection handling - sdhci-msm: Add support voltage pad switching" * tag 'mmc-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (104 commits) mmc: renesas_sdhi: really fix WP logic regressions mmc: mvsdio: Enable MMC_CAP_ERASE mmc: mvsdio: Respect card busy time out from mmc core mmc: sdhci-msm: Remove NO_CARD_NO_RESET quirk mmc: sunxi: Use ifdef rather than __maybe_unused mmc: mxmmc: Use ifdef rather than __maybe_unused mmc: mxmmc: include linux/highmem.h mmc: sunxi: mark PM functions as __maybe_unused mmc: Throttle calls to MMC_SEND_STATUS during mmc_do_erase() mmc: au1xmmc: handle highmem pages mmc: Allow non-sleeping GPIO cd mmc: sdhci-*: Don't emit error msg if sdhci_add_host() fails mmc: sd: Define name for default speed dtr mmc: core: Move calls to ->prepare_hs400_tuning() closer to mmc code mmc: sdhci-xenon: use match_string() helper mmc: wbsd: handle highmem pages mmc: ushc: handle highmem pages mmc: mxcmmc: handle highmem pages mmc: atmel-mci: use sg_copy_{from,to}_buffer mmc: android-goldfish: use sg_copy_{from,to}_buffer ...
Diffstat (limited to 'drivers/mmc/host/wbsd.c')
-rw-r--r--drivers/mmc/host/wbsd.c68
1 files changed, 30 insertions, 38 deletions
diff --git a/drivers/mmc/host/wbsd.c b/drivers/mmc/host/wbsd.c
index f4233576153b..1e54bbf13d75 100644
--- a/drivers/mmc/host/wbsd.c
+++ b/drivers/mmc/host/wbsd.c
@@ -268,43 +268,29 @@ static inline int wbsd_next_sg(struct wbsd_host *host)
return host->num_sg;
}
-static inline char *wbsd_sg_to_buffer(struct wbsd_host *host)
+static inline char *wbsd_map_sg(struct wbsd_host *host)
{
- return sg_virt(host->cur_sg);
+ return kmap_atomic(sg_page(host->cur_sg)) + host->cur_sg->offset;
}
static inline void wbsd_sg_to_dma(struct wbsd_host *host, struct mmc_data *data)
{
- unsigned int len, i;
- struct scatterlist *sg;
- char *dmabuf = host->dma_buffer;
- char *sgbuf;
-
- sg = data->sg;
- len = data->sg_len;
-
- for (i = 0; i < len; i++) {
- sgbuf = sg_virt(&sg[i]);
- memcpy(dmabuf, sgbuf, sg[i].length);
- dmabuf += sg[i].length;
- }
+ size_t len = 0;
+ int i;
+
+ for (i = 0; i < data->sg_len; i++)
+ len += data->sg[i].length;
+ sg_copy_to_buffer(data->sg, data->sg_len, host->dma_buffer, len);
}
static inline void wbsd_dma_to_sg(struct wbsd_host *host, struct mmc_data *data)
{
- unsigned int len, i;
- struct scatterlist *sg;
- char *dmabuf = host->dma_buffer;
- char *sgbuf;
-
- sg = data->sg;
- len = data->sg_len;
-
- for (i = 0; i < len; i++) {
- sgbuf = sg_virt(&sg[i]);
- memcpy(sgbuf, dmabuf, sg[i].length);
- dmabuf += sg[i].length;
- }
+ size_t len = 0;
+ int i;
+
+ for (i = 0; i < data->sg_len; i++)
+ len += data->sg[i].length;
+ sg_copy_from_buffer(data->sg, data->sg_len, host->dma_buffer, len);
}
/*
@@ -418,7 +404,7 @@ static void wbsd_empty_fifo(struct wbsd_host *host)
{
struct mmc_data *data = host->mrq->cmd->data;
char *buffer;
- int i, fsr, fifo;
+ int i, idx, fsr, fifo;
/*
* Handle excessive data.
@@ -426,7 +412,8 @@ static void wbsd_empty_fifo(struct wbsd_host *host)
if (host->num_sg == 0)
return;
- buffer = wbsd_sg_to_buffer(host) + host->offset;
+ buffer = wbsd_map_sg(host) + host->offset;
+ idx = 0;
/*
* Drain the fifo. This has a tendency to loop longer
@@ -445,8 +432,7 @@ static void wbsd_empty_fifo(struct wbsd_host *host)
fifo = 1;
for (i = 0; i < fifo; i++) {
- *buffer = inb(host->base + WBSD_DFR);
- buffer++;
+ buffer[idx++] = inb(host->base + WBSD_DFR);
host->offset++;
host->remain--;
@@ -456,16 +442,19 @@ static void wbsd_empty_fifo(struct wbsd_host *host)
* End of scatter list entry?
*/
if (host->remain == 0) {
+ kunmap_atomic(buffer);
/*
* Get next entry. Check if last.
*/
if (!wbsd_next_sg(host))
return;
- buffer = wbsd_sg_to_buffer(host);
+ buffer = wbsd_map_sg(host);
+ idx = 0;
}
}
}
+ kunmap_atomic(buffer);
/*
* This is a very dirty hack to solve a
@@ -480,7 +469,7 @@ static void wbsd_fill_fifo(struct wbsd_host *host)
{
struct mmc_data *data = host->mrq->cmd->data;
char *buffer;
- int i, fsr, fifo;
+ int i, idx, fsr, fifo;
/*
* Check that we aren't being called after the
@@ -489,7 +478,8 @@ static void wbsd_fill_fifo(struct wbsd_host *host)
if (host->num_sg == 0)
return;
- buffer = wbsd_sg_to_buffer(host) + host->offset;
+ buffer = wbsd_map_sg(host) + host->offset;
+ idx = 0;
/*
* Fill the fifo. This has a tendency to loop longer
@@ -508,8 +498,7 @@ static void wbsd_fill_fifo(struct wbsd_host *host)
fifo = 15;
for (i = 16; i > fifo; i--) {
- outb(*buffer, host->base + WBSD_DFR);
- buffer++;
+ outb(buffer[idx], host->base + WBSD_DFR);
host->offset++;
host->remain--;
@@ -519,16 +508,19 @@ static void wbsd_fill_fifo(struct wbsd_host *host)
* End of scatter list entry?
*/
if (host->remain == 0) {
+ kunmap_atomic(buffer);
/*
* Get next entry. Check if last.
*/
if (!wbsd_next_sg(host))
return;
- buffer = wbsd_sg_to_buffer(host);
+ buffer = wbsd_map_sg(host);
+ idx = 0;
}
}
}
+ kunmap_atomic(buffer);
/*
* The controller stops sending interrupts for