Merge tag 'mmc-v4.2' of git://git.linaro.org/people/ulf.hansson/mmc

Pull MMC updates from Ulf Hansson:
 "Here are the changes for MMC for v4.2.

  MMC core:
   - Fix an error path in the mmc block layer
   - Fix PM domain attachment for the SDIO bus
   - Add support for driver strength selection
   - Increase a delay to let voltage stabilize
   - Add support for disabling write-protect detection
   - Add facility to support re-tuning
   - Re-tune and retry in the recovery path
   - Add reset option for SDIO
   - Consolidations and clean-ups

  MMC host:
   - Add Mediatek MMC driver
   - Constify platform_device_id for a couple of hosts
   - Fix modalias to make module auto-loading work for a couple of hosts
   - sdhci: Add support for sdhci-arasan4.9a
   - sdhci: Fix low memory corruption
   - sdhci: Restore behavior while creating OCR mask
   - sdhci: Add a callback to select drive strength
   - sdhci: Fix driver type B and D handling
   - sdhci: Add support for drive strength selection for SPT
   - sdhci: Enable HS400 for some Intel host controllers
   - sdhci: Convert to use the new re-tuning facility
   - sdhci: Various minor fixes and clean-ups
   - dw_mmc: Add support for hi6220
   - dw_mmc: Use core to handle absent write protect line
   - dw_mmc: Add support to switch voltage
   - tmio: Some fixes and modernizations
   - sh_mmcif: Improve clock rate calculation"

* tag 'mmc-v4.2' of git://git.linaro.org/people/ulf.hansson/mmc: (98 commits)
  mmc: queue: prevent soft lockups on PREEMPT=n
  mmc: mediatek: Add PM support for MMC driver
  mmc: mediatek: Add Mediatek MMC driver
  mmc: dt-bindings: add Mediatek MMC bindings
  mmc: card: Fixup request missing in mmc_blk_issue_rw_rq
  mmc: sdhci: fix low memory corruption
  mmc: sdhci-pci: Change AMD SDHCI quirk application scope
  i2c-piix4: Use Macro for AMD CZ SMBus device ID
  pci_ids: Add AMD KERNCZ device ID support
  mmc: queue: use swap() in mmc_queue_thread()
  mmc: dw_mmc: insmod followed by rmmod will hung for eMMC
  mmc: sdhci: Restore behavior while creating OCR mask
  mmc: sdhci-pxav3: fix device wakeup initialization
  mmc: core: Attach PM domain prior probing of SDIO func driver
  mmc: core: Remove redundant ->power_restore() callback for SD
  mmc: core: Remove redundant ->power_restore() callback for MMC
  mmc: sdhci-bcm2835: Actually enable the clock
  mmc: sdhci-bcm2835: Clean up platform allocations if sdhci init fails.
  mmc: sdhci-of-esdhc: enable interrupt mode to detect card
  mmc: sdhci-esdhc-imx: add quirk SDHCI_QUIRK2_BROKEN_HS200 for imx6qdl
  ...

1 files changed, 9 insertions, 2 deletions

diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c
index 22e9111b11ff..797be7549a15 100644
--- a/drivers/mmc/host/sdhci-of-esdhc.c
+++ b/drivers/mmc/host/sdhci-of-esdhc.c
@@ -199,7 +199,7 @@ static unsigned int esdhc_of_get_min_clock(struct sdhci_host *host)
 
 static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock)
 {
-	int pre_div = 2;
+	int pre_div = 1;
 	int div = 1;
 	u32 temp;
 
@@ -229,7 +229,7 @@ static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock)
 
 	dev_dbg(mmc_dev(host->mmc), "desired SD clock: %d, actual: %d\n",
 		clock, host->max_clk / pre_div / div);
-
+	host->mmc->actual_clock = host->max_clk / pre_div / div;
 	pre_div >>= 1;
 	div--;
 
@@ -361,6 +361,13 @@ static int sdhci_esdhc_probe(struct platform_device *pdev)
 	sdhci_get_of_property(pdev);
 
 	np = pdev->dev.of_node;
+	if (of_device_is_compatible(np, "fsl,p5040-esdhc") ||
+	    of_device_is_compatible(np, "fsl,p5020-esdhc") ||
+	    of_device_is_compatible(np, "fsl,p4080-esdhc") ||
+	    of_device_is_compatible(np, "fsl,p1020-esdhc") ||
+	    of_device_is_compatible(np, "fsl,t1040-esdhc"))
+		host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION;
+
 	if (of_device_is_compatible(np, "fsl,p2020-esdhc")) {
 		/*
 		 * Freescale messed up with P2020 as it has a non-standard