Merge tag 'iio-for-3.13a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First round of new drivers, functionality and cleanups for IIO in the 3.13 cycle

A number of new drivers and some new functionality + a lot of cleanups
all over IIO.

New Core Elements

1) New INT_TIME info_mask element for integration time, which may have
   different effects on measurement noise and similar, than an amplifier
   and hence is different from existing SCALE.  Already existed in some
   drivers as a custom attribute.

2) Introduce a iio_push_buffers_with_timestamp helper to cover the common
   case of filling the last 64 bits of data to be passed to the buffer with
   a timestamp.  Applied to lots of drivers. Cuts down on repeated code and
   moves a slightly fiddly bit of logic into a single location.

3) Introduce info_mask_[shared_by_dir/shared_by_all] elements to allow support
   of elements such as sampling_frequency which is typically shared by all
   input channels on a device.  This reduces code and makes these controls
   available from in kernel consumers of IIO devices.

New drivers

1) MCP3422/3/4 ADC

2) TSL4531 ambient light sensor

3) TCS3472/5 color light sensor

4) GP2AP020A00F ambient light / proximity sensor

5) LPS001WP support added to ST pressure sensor driver.

New driver functionality

1) ti_am335x_adc Add buffered sampling support.
   This device has a hardware fifo that is fed directly into an IIO kfifo
   buffer based on a watershed interrupt.  Note this will act as an example
   of how to handle this increasingly common type of device.
   The only previous example - sca3000 - take a less than optimal approach
   which is largely why it is still in staging.
   A couple of little cleanups for that new functionality followed later.

Core cleanups:

1) MAINTAINERS - Sachin actually brought my email address up to date because
   I said I'd do it and never got around to it :)

2) Assign buffer list elements as single element lists to simplify the
   iio_buffer_is_active logic.

3) wake_up_interruptible_poll instead of wake_up_interruptible to only wake
   up threads waiting for poll notifications.

4) Add O_CLOEXEC flag to anon_inode_get_fd call for IIO event interface.

5) Change iio_push_to_buffers to take a void * pointer so as to avoid some
   annoying and unnecessary type casts.

6) iio_compute_scan_bytes incorrectly took a long rather than unsigned long.

7) Various minor tidy ups.

Driver cleanups (in no particular order)

1) Another set of devm_ allocations patches from Sachin Kamat.

2) tsl2x7x - 0 to NULL cleanup.

3) hmc5843 - fix missing > in MODULE_AUTHOR

4) Set of strict_strto* to kstrto* conversions.

5) mxs-lradc - fix ordering of resource removal to match creation

6) mxs-lradc - add MODULE_ALIAS

7) adc7606 - drop a work pending test duplicated in core functions.

8) hmc5843 - devm_ allocation patch

9) Series of redundant breaks removed.

10) ad2s1200 - pr_err -> dev_err

11) adjd_s311 - use INT_TIME

12)  ST sensors - large set of cleanups from Lee Jones and removed restriction
    to using only triggers provided by the st_sensors themselves from
    Dennis Ciocca.

13) dummy and tmp006 provide sampling_frequency via info_mask_shared_by_all.

14) tcs3472 - fix incorrect buffer size and wrong device pointer used in
    suspend / resume functions.

15) max1363 - use defaults for buffer setup ops as provided by the triggered
    buffer helpers as they are the same as were specified in max1363 driver.

16) Trivial tidy ups in a number of other drivers.

1 files changed, 258 insertions, 0 deletions

diff --git a/drivers/iio/light/tsl4531.c b/drivers/iio/light/tsl4531.c
new file mode 100644
index 000000000000..a15006efa137
--- /dev/null
+++ b/drivers/iio/light/tsl4531.c
@@ -0,0 +1,258 @@
+/*
+ * tsl4531.c - Support for TAOS TSL4531 ambient light sensor
+ *
+ * Copyright 2013 Peter Meerwald <pmeerw@pmeerw.net>
+ *
+ * This file is subject to the terms and conditions of version 2 of
+ * the GNU General Public License.  See the file COPYING in the main
+ * directory of this archive for more details.
+ *
+ * IIO driver for the TSL4531x family
+ *   TSL45311/TSL45313: 7-bit I2C slave address 0x39
+ *   TSL45315/TSL45317: 7-bit I2C slave address 0x29
+ *
+ * TODO: single cycle measurement
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+#define TSL4531_DRV_NAME "tsl4531"
+
+#define TCS3472_COMMAND BIT(7)
+
+#define TSL4531_CONTROL (TCS3472_COMMAND | 0x00)
+#define TSL4531_CONFIG (TCS3472_COMMAND | 0x01)
+#define TSL4531_DATA (TCS3472_COMMAND | 0x04)
+#define TSL4531_ID (TCS3472_COMMAND | 0x0a)
+
+/* operating modes in control register */
+#define TSL4531_MODE_POWERDOWN 0x00
+#define TSL4531_MODE_SINGLE_ADC 0x02
+#define TSL4531_MODE_NORMAL 0x03
+
+/* integration time control in config register */
+#define TSL4531_TCNTRL_400MS 0x00
+#define TSL4531_TCNTRL_200MS 0x01
+#define TSL4531_TCNTRL_100MS 0x02
+
+/* part number in id register */
+#define TSL45311_ID 0x8
+#define TSL45313_ID 0x9
+#define TSL45315_ID 0xa
+#define TSL45317_ID 0xb
+#define TSL4531_ID_SHIFT 4
+
+struct tsl4531_data {
+	struct i2c_client *client;
+	struct mutex lock;
+	int int_time;
+};
+
+static IIO_CONST_ATTR_INT_TIME_AVAIL("0.1 0.2 0.4");
+
+static struct attribute *tsl4531_attributes[] = {
+	&iio_const_attr_integration_time_available.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group tsl4531_attribute_group = {
+	.attrs = tsl4531_attributes,
+};
+
+static const struct iio_chan_spec tsl4531_channels[] = {
+	{
+		.type = IIO_LIGHT,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+			BIT(IIO_CHAN_INFO_SCALE) |
+			BIT(IIO_CHAN_INFO_INT_TIME)
+	}
+};
+
+static int tsl4531_read_raw(struct iio_dev *indio_dev,
+				struct iio_chan_spec const *chan,
+				int *val, int *val2, long mask)
+{
+	struct tsl4531_data *data = iio_priv(indio_dev);
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		ret = i2c_smbus_read_word_data(data->client,
+			TSL4531_DATA);
+		if (ret < 0)
+			return ret;
+		*val = ret;
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		/* 0.. 1x, 1 .. 2x, 2 .. 4x */
+		*val = 1 << data->int_time;
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_INT_TIME:
+		if (data->int_time == 0)
+			*val2 = 400000;
+		else if (data->int_time == 1)
+			*val2 = 200000;
+		else if (data->int_time == 2)
+			*val2 = 100000;
+		else
+			return -EINVAL;
+		*val = 0;
+		return IIO_VAL_INT_PLUS_MICRO;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int tsl4531_write_raw(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan,
+			     int val, int val2, long mask)
+{
+	struct tsl4531_data *data = iio_priv(indio_dev);
+	int int_time, ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_INT_TIME:
+		if (val != 0)
+			return -EINVAL;
+		if (val2 == 400000)
+			int_time = 0;
+		else if (val2 == 200000)
+			int_time = 1;
+		else if (val2 == 100000)
+			int_time = 2;
+		else
+			return -EINVAL;
+		mutex_lock(&data->lock);
+		ret = i2c_smbus_write_byte_data(data->client,
+			TSL4531_CONFIG, int_time);
+		if (ret >= 0)
+			data->int_time = int_time;
+		mutex_unlock(&data->lock);
+		return ret;
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct iio_info tsl4531_info = {
+	.read_raw = tsl4531_read_raw,
+	.write_raw = tsl4531_write_raw,
+	.attrs = &tsl4531_attribute_group,
+	.driver_module = THIS_MODULE,
+};
+
+static int tsl4531_check_id(struct i2c_client *client)
+{
+	int ret = i2c_smbus_read_byte_data(client, TSL4531_ID);
+	if (ret < 0)
+		return ret;
+
+	switch (ret >> TSL4531_ID_SHIFT) {
+	case TSL45311_ID:
+	case TSL45313_ID:
+	case TSL45315_ID:
+	case TSL45317_ID:
+		return 1;
+	default:
+		return 0;
+	}
+}
+
+static int tsl4531_probe(struct i2c_client *client,
+			  const struct i2c_device_id *id)
+{
+	struct tsl4531_data *data;
+	struct iio_dev *indio_dev;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	data = iio_priv(indio_dev);
+	i2c_set_clientdata(client, indio_dev);
+	data->client = client;
+	mutex_init(&data->lock);
+
+	if (!tsl4531_check_id(client)) {
+		dev_err(&client->dev, "no TSL4531 sensor\n");
+		return -ENODEV;
+	}
+
+	ret = i2c_smbus_write_byte_data(data->client, TSL4531_CONTROL,
+		TSL4531_MODE_NORMAL);
+	if (ret < 0)
+		return ret;
+
+	ret = i2c_smbus_write_byte_data(data->client, TSL4531_CONFIG,
+		TSL4531_TCNTRL_400MS);
+	if (ret < 0)
+		return ret;
+
+	indio_dev->dev.parent = &client->dev;
+	indio_dev->info = &tsl4531_info;
+	indio_dev->channels = tsl4531_channels;
+	indio_dev->num_channels = ARRAY_SIZE(tsl4531_channels);
+	indio_dev->name = TSL4531_DRV_NAME;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	return iio_device_register(indio_dev);
+}
+
+static int tsl4531_powerdown(struct i2c_client *client)
+{
+	return i2c_smbus_write_byte_data(client, TSL4531_CONTROL,
+		TSL4531_MODE_POWERDOWN);
+}
+
+static int tsl4531_remove(struct i2c_client *client)
+{
+	iio_device_unregister(i2c_get_clientdata(client));
+	tsl4531_powerdown(client);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int tsl4531_suspend(struct device *dev)
+{
+	return tsl4531_powerdown(to_i2c_client(dev));
+}
+
+static int tsl4531_resume(struct device *dev)
+{
+	return i2c_smbus_write_byte_data(to_i2c_client(dev), TSL4531_CONTROL,
+		TSL4531_MODE_NORMAL);
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(tsl4531_pm_ops, tsl4531_suspend, tsl4531_resume);
+
+static const struct i2c_device_id tsl4531_id[] = {
+	{ "tsl4531", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, tsl4531_id);
+
+static struct i2c_driver tsl4531_driver = {
+	.driver = {
+		.name   = TSL4531_DRV_NAME,
+		.pm	= &tsl4531_pm_ops,
+		.owner  = THIS_MODULE,
+	},
+	.probe  = tsl4531_probe,
+	.remove = tsl4531_remove,
+	.id_table = tsl4531_id,
+};
+
+module_i2c_driver(tsl4531_driver);
+
+MODULE_AUTHOR("Peter Meerwald <pmeerw@pmeerw.net>");
+MODULE_DESCRIPTION("TAOS TSL4531 ambient light sensors driver");
+MODULE_LICENSE("GPL");