Remove the libaries and tools interacting with the dhd driver

We don't want to use the dhd kernel driver, because even if
it's free software, we prefer to use drivers already in Linux.

This makes this wifi HAL more generic.

Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>

1 files changed, 0 insertions, 126 deletions

diff --git a/dhdutil/include/bcmcdc.h b/dhdutil/include/bcmcdc.h
deleted file mode 100644
index ab2c84f..0000000
--- a/dhdutil/include/bcmcdc.h
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- * CDC network driver ioctl/indication encoding
- * Broadcom 802.11abg Networking Device Driver
- *
- * Definitions subject to change without notice.
- *
- * Copyright (C) 1999-2013, Broadcom Corporation
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
- * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
- * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
- * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- * $Id: bcmcdc.h 318308 2012-03-02 02:23:42Z $
- */
-#ifndef _bcmcdc_h_
-#define	_bcmcdc_h_
-#include <proto/ethernet.h>
-
-typedef struct cdc_ioctl {
-	uint32 cmd;      /* ioctl command value */
-	uint32 len;      /* lower 16: output buflen; upper 16: input buflen (excludes header) */
-	uint32 flags;    /* flag defns given below */
-	uint32 status;   /* status code returned from the device */
-} cdc_ioctl_t;
-
-/* Max valid buffer size that can be sent to the dongle */
-#define CDC_MAX_MSG_SIZE   ETHER_MAX_LEN
-
-/* len field is divided into input and output buffer lengths */
-#define CDCL_IOC_OUTLEN_MASK   0x0000FFFF  /* maximum or expected response length, */
-					   /* excluding IOCTL header */
-#define CDCL_IOC_OUTLEN_SHIFT  0
-#define CDCL_IOC_INLEN_MASK    0xFFFF0000   /* input buffer length, excluding IOCTL header */
-#define CDCL_IOC_INLEN_SHIFT   16
-
-/* CDC flag definitions */
-#define CDCF_IOC_ERROR		0x01	/* 0=success, 1=ioctl cmd failed */
-#define CDCF_IOC_SET		0x02	/* 0=get, 1=set cmd */
-#define CDCF_IOC_OVL_IDX_MASK	0x3c	/* overlay region index mask */
-#define CDCF_IOC_OVL_RSV	0x40	/* 1=reserve this overlay region */
-#define CDCF_IOC_OVL		0x80	/* 1=this ioctl corresponds to an overlay */
-#define CDCF_IOC_ACTION_MASK	0xfe	/* SET/GET, OVL_IDX, OVL_RSV, OVL mask */
-#define CDCF_IOC_ACTION_SHIFT	1	/* SET/GET, OVL_IDX, OVL_RSV, OVL shift */
-#define CDCF_IOC_IF_MASK	0xF000	/* I/F index */
-#define CDCF_IOC_IF_SHIFT	12
-#define CDCF_IOC_ID_MASK	0xFFFF0000	/* used to uniquely id an ioctl req/resp pairing */
-#define CDCF_IOC_ID_SHIFT	16		/* # of bits of shift for ID Mask */
-
-#define CDC_IOC_IF_IDX(flags)	(((flags) & CDCF_IOC_IF_MASK) >> CDCF_IOC_IF_SHIFT)
-#define CDC_IOC_ID(flags)	(((flags) & CDCF_IOC_ID_MASK) >> CDCF_IOC_ID_SHIFT)
-
-#define CDC_GET_IF_IDX(hdr) \
-	((int)((((hdr)->flags) & CDCF_IOC_IF_MASK) >> CDCF_IOC_IF_SHIFT))
-#define CDC_SET_IF_IDX(hdr, idx) \
-	((hdr)->flags = (((hdr)->flags & ~CDCF_IOC_IF_MASK) | ((idx) << CDCF_IOC_IF_SHIFT)))
-
-/*
- * BDC header
- *
- *   The BDC header is used on data packets to convey priority across USB.
- */
-
-struct bdc_header {
-	uint8	flags;			/* Flags */
-	uint8	priority;		/* 802.1d Priority 0:2 bits, 4:7 USB flow control info */
-	uint8	flags2;
-	uint8	dataOffset;		/* Offset from end of BDC header to packet data, in
-					 * 4-byte words.  Leaves room for optional headers.
-					 */
-};
-
-#define	BDC_HEADER_LEN		4
-
-/* flags field bitmap */
-#define BDC_FLAG_80211_PKT	0x01	/* Packet is in 802.11 format (dongle -> host) */
-#define BDC_FLAG_SUM_GOOD	0x04	/* Dongle has verified good RX checksums */
-#define BDC_FLAG_SUM_NEEDED	0x08	/* Dongle needs to do TX checksums: host->device */
-#define BDC_FLAG_EVENT_MSG	0x08	/* Payload contains an event msg: device->host */
-#define BDC_FLAG_VER_MASK	0xf0	/* Protocol version mask */
-#define BDC_FLAG_VER_SHIFT	4	/* Protocol version shift */
-
-/* priority field bitmap */
-#define BDC_PRIORITY_MASK	0x07
-#define BDC_PRIORITY_FC_MASK	0xf0	/* flow control info mask */
-#define BDC_PRIORITY_FC_SHIFT	4	/* flow control info shift */
-
-/* flags2 field bitmap */
-#define BDC_FLAG2_IF_MASK	0x0f	/* interface index (host <-> dongle) */
-#define BDC_FLAG2_IF_SHIFT	0
-#define BDC_FLAG2_FC_FLAG	0x10	/* flag to indicate if pkt contains */
-					/* FLOW CONTROL info only */
-
-/* version numbers */
-#define BDC_PROTO_VER_1		1	/* Old Protocol version */
-#define BDC_PROTO_VER		2	/* Protocol version */
-
-/* flags2.if field access macros */
-#define BDC_GET_IF_IDX(hdr) \
-	((int)((((hdr)->flags2) & BDC_FLAG2_IF_MASK) >> BDC_FLAG2_IF_SHIFT))
-#define BDC_SET_IF_IDX(hdr, idx) \
-	((hdr)->flags2 = (((hdr)->flags2 & ~BDC_FLAG2_IF_MASK) | ((idx) << BDC_FLAG2_IF_SHIFT)))
-
-#define BDC_FLAG2_PAD_MASK		0xf0
-#define BDC_FLAG_PAD_MASK		0x03
-#define BDC_FLAG2_PAD_SHIFT		2
-#define BDC_FLAG_PAD_SHIFT		0
-#define BDC_FLAG2_PAD_IDX		0x3c
-#define BDC_FLAG_PAD_IDX		0x03
-#define BDC_GET_PAD_LEN(hdr) \
-	((int)(((((hdr)->flags2) & BDC_FLAG2_PAD_MASK) >> BDC_FLAG2_PAD_SHIFT) | \
-	((((hdr)->flags) & BDC_FLAG_PAD_MASK) >> BDC_FLAG_PAD_SHIFT)))
-#define BDC_SET_PAD_LEN(hdr, idx) \
-	((hdr)->flags2 = (((hdr)->flags2 & ~BDC_FLAG2_PAD_MASK) | \
-	(((idx) & BDC_FLAG2_PAD_IDX) << BDC_FLAG2_PAD_SHIFT))); \
-	((hdr)->flags = (((hdr)->flags & ~BDC_FLAG_PAD_MASK) | \
-	(((idx) & BDC_FLAG_PAD_IDX) << BDC_FLAG_PAD_SHIFT)))
-
-#endif /* _bcmcdc_h_ */