drop easy_install script and associated documentation

8 files changed, 21 insertions, 1184 deletions

diff --git a/docs/easy_install.txt b/docs/easy_install.txt
deleted file mode 100644
index 544b9efd..00000000
--- a/docs/easy_install.txt
+++ /dev/null
@@ -1,1085 +0,0 @@
-============
-Easy Install
-============
-
-.. warning::
-    Easy Install is deprecated. Do not use it. Instead use pip. If
-    you think you need Easy Install, please reach out to the PyPA
-    team (a ticket to pip or setuptools is fine), describing your
-    use-case.
-
-Easy Install is a python module (``easy_install``) bundled with ``setuptools``
-that lets you automatically download, build, install, and manage Python
-packages.
-
-Please share your experiences with us! If you encounter difficulty installing
-a package, please contact us via the `distutils mailing list
-<http://mail.python.org/pipermail/distutils-sig/>`_.  (Note: please DO NOT send
-private email directly to the author of setuptools; it will be discarded.  The
-mailing list is a searchable archive of previously-asked and answered
-questions; you should begin your research there before reporting something as a
-bug -- and then do so via list discussion first.)
-
-(Also, if you'd like to learn about how you can use ``setuptools`` to make your
-own packages work better with EasyInstall, or provide EasyInstall-like features
-without requiring your users to use EasyInstall directly, you'll probably want
-to check out the full documentation as well.)
-
-.. contents:: **Table of Contents**
-
-
-Using "Easy Install"
-====================
-
-
-.. _installation instructions:
-
-Installing "Easy Install"
--------------------------
-
-Please see the `setuptools PyPI page <https://pypi.org/project/setuptools/>`_
-for download links and basic installation instructions for each of the
-supported platforms.
-
-You will need at least Python 3.4 or 2.7.  An ``easy_install`` script will be
-installed in the normal location for Python scripts on your platform.
-
-Note that the instructions on the setuptools PyPI page assume that you are
-are installing to Python's primary ``site-packages`` directory.  If this is
-not the case, you should consult the section below on `Custom Installation
-Locations`_ before installing.  (And, on Windows, you should not use the
-``.exe`` installer when installing to an alternate location.)
-
-Note that ``easy_install`` normally works by downloading files from the
-internet.  If you are behind an NTLM-based firewall that prevents Python
-programs from accessing the net directly, you may wish to first install and use
-the `APS proxy server <http://ntlmaps.sf.net/>`_, which lets you get past such
-firewalls in the same way that your web browser(s) do.
-
-(Alternately, if you do not wish easy_install to actually download anything, you
-can restrict it from doing so with the ``--allow-hosts`` option; see the
-sections on `restricting downloads with --allow-hosts`_ and `command-line
-options`_ for more details.)
-
-
-Troubleshooting
-~~~~~~~~~~~~~~~
-
-If EasyInstall/setuptools appears to install correctly, and you can run the
-``easy_install`` command but it fails with an ``ImportError``, the most likely
-cause is that you installed to a location other than ``site-packages``,
-without taking any of the steps described in the `Custom Installation
-Locations`_ section below.  Please see that section and follow the steps to
-make sure that your custom location will work correctly.  Then re-install.
-
-Similarly, if you can run ``easy_install``, and it appears to be installing
-packages, but then you can't import them, the most likely issue is that you
-installed EasyInstall correctly but are using it to install packages to a
-non-standard location that hasn't been properly prepared.  Again, see the
-section on `Custom Installation Locations`_ for more details.
-
-
-Windows Notes
-~~~~~~~~~~~~~
-
-Installing setuptools will provide an ``easy_install`` command according to
-the techniques described in `Executables and Launchers`_. If the
-``easy_install`` command is not available after installation, that section
-provides details on how to configure Windows to make the commands available.
-
-
-Downloading and Installing a Package
-------------------------------------
-
-For basic use of ``easy_install``, you need only supply the filename or URL of
-a source distribution or .egg file (`Python Egg`__).
-
-__ http://peak.telecommunity.com/DevCenter/PythonEggs
-
-**Example 1**. Install a package by name, searching PyPI for the latest
-version, and automatically downloading, building, and installing it::
-
-    easy_install SQLObject
-
-**Example 2**. Install or upgrade a package by name and version by finding
-links on a given "download page"::
-
-    easy_install -f http://pythonpaste.org/package_index.html SQLObject
-
-**Example 3**. Download a source distribution from a specified URL,
-automatically building and installing it::
-
-    easy_install http://example.com/path/to/MyPackage-1.2.3.tgz
-
-**Example 4**. Install an already-downloaded .egg file::
-
-    easy_install /my_downloads/OtherPackage-3.2.1-py2.3.egg
-
-**Example 5**.  Upgrade an already-installed package to the latest version
-listed on PyPI::
-
-    easy_install --upgrade PyProtocols
-
-**Example 6**.  Install a source distribution that's already downloaded and
-extracted in the current directory (New in 0.5a9)::
-
-    easy_install .
-
-**Example 7**.  (New in 0.6a1) Find a source distribution or Subversion
-checkout URL for a package, and extract it or check it out to
-``~/projects/sqlobject`` (the name will always be in all-lowercase), where it
-can be examined or edited.  (The package will not be installed, but it can
-easily be installed with ``easy_install ~/projects/sqlobject``.  See `Editing
-and Viewing Source Packages`_ below for more info.)::
-
-    easy_install --editable --build-directory ~/projects SQLObject
-
-**Example 7**. (New in 0.6.11) Install a distribution within your home dir::
-
-    easy_install --user SQLAlchemy
-
-Easy Install accepts URLs, filenames, PyPI package names (i.e., ``distutils``
-"distribution" names), and package+version specifiers.  In each case, it will
-attempt to locate the latest available version that meets your criteria.
-
-When downloading or processing downloaded files, Easy Install recognizes
-distutils source distribution files with extensions of .tgz, .tar, .tar.gz,
-.tar.bz2, or .zip.  And of course it handles already-built .egg
-distributions as well as ``.win32.exe`` installers built using distutils.
-
-By default, packages are installed to the running Python installation's
-``site-packages`` directory, unless you provide the ``-d`` or ``--install-dir``
-option to specify an alternative directory, or specify an alternate location
-using distutils configuration files.  (See `Configuration Files`_, below.)
-
-By default, any scripts included with the package are installed to the running
-Python installation's standard script installation location.  However, if you
-specify an installation directory via the command line or a config file, then
-the default directory for installing scripts will be the same as the package
-installation directory, to ensure that the script will have access to the
-installed package.  You can override this using the ``-s`` or ``--script-dir``
-option.
-
-Installed packages are added to an ``easy-install.pth`` file in the install
-directory, so that Python will always use the most-recently-installed version
-of the package.  If you would like to be able to select which version to use at
-runtime, you should use the ``-m`` or ``--multi-version`` option.
-
-
-Upgrading a Package
--------------------
-
-You don't need to do anything special to upgrade a package: just install the
-new version, either by requesting a specific version, e.g.::
-
-    easy_install "SomePackage==2.0"
-
-a version greater than the one you have now::
-
-    easy_install "SomePackage>2.0"
-
-using the upgrade flag, to find the latest available version on PyPI::
-
-    easy_install --upgrade SomePackage
-
-or by using a download page, direct download URL, or package filename::
-
-    easy_install -f http://example.com/downloads ExamplePackage
-
-    easy_install http://example.com/downloads/ExamplePackage-2.0-py2.4.egg
-
-    easy_install my_downloads/ExamplePackage-2.0.tgz
-
-If you're using ``-m`` or ``--multi-version`` , using the ``require()``
-function at runtime automatically selects the newest installed version of a
-package that meets your version criteria.  So, installing a newer version is
-the only step needed to upgrade such packages.
-
-If you're installing to a directory on PYTHONPATH, or a configured "site"
-directory (and not using ``-m``), installing a package automatically replaces
-any previous version in the ``easy-install.pth`` file, so that Python will
-import the most-recently installed version by default.  So, again, installing
-the newer version is the only upgrade step needed.
-
-If you haven't suppressed script installation (using ``--exclude-scripts`` or
-``-x``), then the upgraded version's scripts will be installed, and they will
-be automatically patched to ``require()`` the corresponding version of the
-package, so that you can use them even if they are installed in multi-version
-mode.
-
-``easy_install`` never actually deletes packages (unless you're installing a
-package with the same name and version number as an existing package), so if
-you want to get rid of older versions of a package, please see `Uninstalling
-Packages`_, below.
-
-
-Changing the Active Version
----------------------------
-
-If you've upgraded a package, but need to revert to a previously-installed
-version, you can do so like this::
-
-    easy_install PackageName==1.2.3
-
-Where ``1.2.3`` is replaced by the exact version number you wish to switch to.
-If a package matching the requested name and version is not already installed
-in a directory on ``sys.path``, it will be located via PyPI and installed.
-
-If you'd like to switch to the latest installed version of ``PackageName``, you
-can do so like this::
-
-    easy_install PackageName
-
-This will activate the latest installed version.  (Note: if you have set any
-``find_links`` via distutils configuration files, those download pages will be
-checked for the latest available version of the package, and it will be
-downloaded and installed if it is newer than your current version.)
-
-Note that changing the active version of a package will install the newly
-active version's scripts, unless the ``--exclude-scripts`` or ``-x`` option is
-specified.
-
-
-Uninstalling Packages
----------------------
-
-If you have replaced a package with another version, then you can just delete
-the package(s) you don't need by deleting the PackageName-versioninfo.egg file
-or directory (found in the installation directory).
-
-If you want to delete the currently installed version of a package (or all
-versions of a package), you should first run::
-
-    easy_install -m PackageName
-
-This will ensure that Python doesn't continue to search for a package you're
-planning to remove. After you've done this, you can safely delete the .egg
-files or directories, along with any scripts you wish to remove.
-
-
-Managing Scripts
-----------------
-
-Whenever you install, upgrade, or change versions of a package, EasyInstall
-automatically installs the scripts for the selected package version, unless
-you tell it not to with ``-x`` or ``--exclude-scripts``.  If any scripts in
-the script directory have the same name, they are overwritten.
-
-Thus, you do not normally need to manually delete scripts for older versions of
-a package, unless the newer version of the package does not include a script
-of the same name.  However, if you are completely uninstalling a package, you
-may wish to manually delete its scripts.
-
-EasyInstall's default behavior means that you can normally only run scripts
-from one version of a package at a time.  If you want to keep multiple versions
-of a script available, however, you can simply use the ``--multi-version`` or
-``-m`` option, and rename the scripts that EasyInstall creates.  This works
-because EasyInstall installs scripts as short code stubs that ``require()`` the
-matching version of the package the script came from, so renaming the script
-has no effect on what it executes.
-
-For example, suppose you want to use two versions of the ``rst2html`` tool
-provided by the `docutils <http://docutils.sf.net/>`_ package.  You might
-first install one version::
-
-    easy_install -m docutils==0.3.9
-
-then rename the ``rst2html.py`` to ``r2h_039``, and install another version::
-
-    easy_install -m docutils==0.3.10
-
-This will create another ``rst2html.py`` script, this one using docutils
-version 0.3.10 instead of 0.3.9.  You now have two scripts, each using a
-different version of the package.  (Notice that we used ``-m`` for both
-installations, so that Python won't lock us out of using anything but the most
-recently-installed version of the package.)
-
-
-Executables and Launchers
--------------------------
-
-On Unix systems, scripts are installed with as natural files with a "#!"
-header and no extension and they launch under the Python version indicated in
-the header.
-
-On Windows, there is no mechanism to "execute" files without extensions, so
-EasyInstall provides two techniques to mirror the Unix behavior. The behavior
-is indicated by the SETUPTOOLS_LAUNCHER environment variable, which may be
-"executable" (default) or "natural".
-
-Regardless of the technique used, the script(s) will be installed to a Scripts
-directory (by default in the Python installation directory). It is recommended
-for EasyInstall that you ensure this directory is in the PATH environment
-variable. The easiest way to ensure the Scripts directory is in the PATH is
-to run ``Tools\Scripts\win_add2path.py`` from the Python directory.
-
-Note that instead of changing your ``PATH`` to include the Python scripts
-directory, you can also retarget the installation location for scripts so they
-go on a directory that's already on the ``PATH``.  For more information see
-`Command-Line Options`_ and `Configuration Files`_.  During installation,
-pass command line options (such as ``--script-dir``) to control where
-scripts will be installed.
-
-
-Windows Executable Launcher
-~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-If the "executable" launcher is used, EasyInstall will create a '.exe'
-launcher of the same name beside each installed script (including
-``easy_install`` itself). These small .exe files launch the script of the
-same name using the Python version indicated in the '#!' header.
-
-This behavior is currently default. To force
-the use of executable launchers, set ``SETUPTOOLS_LAUNCHER`` to "executable".
-
-Natural Script Launcher
-~~~~~~~~~~~~~~~~~~~~~~~
-
-EasyInstall also supports deferring to an external launcher such as
-`pylauncher <https://bitbucket.org/pypa/pylauncher>`_ for launching scripts.
-Enable this experimental functionality by setting the
-``SETUPTOOLS_LAUNCHER`` environment variable to "natural". EasyInstall will
-then install scripts as simple
-scripts with a .pya (or .pyw) extension appended. If these extensions are
-associated with the pylauncher and listed in the PATHEXT environment variable,
-these scripts can then be invoked simply and directly just like any other
-executable. This behavior may become default in a future version.
-
-EasyInstall uses the .pya extension instead of simply
-the typical '.py' extension. This distinct extension is necessary to prevent
-Python
-from treating the scripts as importable modules (where name conflicts exist).
-Current releases of pylauncher do not yet associate with .pya files by
-default, but future versions should do so.
-
-
-Tips & Techniques
------------------
-
-Multiple Python Versions
-~~~~~~~~~~~~~~~~~~~~~~~~
-
-EasyInstall installs itself under two names:
-``easy_install`` and ``easy_install-N.N``, where ``N.N`` is the Python version
-used to install it.  Thus, if you install EasyInstall for both Python 3.2 and
-2.7, you can use the ``easy_install-3.2`` or ``easy_install-2.7`` scripts to
-install packages for the respective Python version.
-
-Setuptools also supplies easy_install as a runnable module which may be
-invoked using ``python -m easy_install`` for any Python with Setuptools
-installed.
-
-Restricting Downloads with ``--allow-hosts``
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-You can use the ``--allow-hosts`` (``-H``) option to restrict what domains
-EasyInstall will look for links and downloads on.  ``--allow-hosts=None``
-prevents downloading altogether.  You can also use wildcards, for example
-to restrict downloading to hosts in your own intranet.  See the section below
-on `Command-Line Options`_ for more details on the ``--allow-hosts`` option.
-
-By default, there are no host restrictions in effect, but you can change this
-default by editing the appropriate `configuration files`_ and adding:
-
-.. code-block:: ini
-
-    [easy_install]
-    allow_hosts = *.myintranet.example.com,*.python.org
-
-The above example would then allow downloads only from hosts in the
-``python.org`` and ``myintranet.example.com`` domains, unless overridden on the
-command line.
-
-
-Installing on Un-networked Machines
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Just copy the eggs or source packages you need to a directory on the target
-machine, then use the ``-f`` or ``--find-links`` option to specify that
-directory's location.  For example::
-
-    easy_install -H None -f somedir SomePackage
-
-will attempt to install SomePackage using only eggs and source packages found
-in ``somedir`` and disallowing all remote access.  You should of course make
-sure you have all of SomePackage's dependencies available in somedir.
-
-If you have another machine of the same operating system and library versions
-(or if the packages aren't platform-specific), you can create the directory of
-eggs using a command like this::
-
-    easy_install -zmaxd somedir SomePackage
-
-This will tell EasyInstall to put zipped eggs or source packages for
-SomePackage and all its dependencies into ``somedir``, without creating any
-scripts or .pth files.  You can then copy the contents of ``somedir`` to the
-target machine.  (``-z`` means zipped eggs, ``-m`` means multi-version, which
-prevents .pth files from being used, ``-a`` means to copy all the eggs needed,
-even if they're installed elsewhere on the machine, and ``-d`` indicates the
-directory to place the eggs in.)
-
-You can also build the eggs from local development packages that were installed
-with the ``setup.py develop`` command, by including the ``-l`` option, e.g.::
-
-    easy_install -zmaxld somedir SomePackage
-
-This will use locally-available source distributions to build the eggs.
-
-
-Packaging Others' Projects As Eggs
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Need to distribute a package that isn't published in egg form?  You can use
-EasyInstall to build eggs for a project.  You'll want to use the ``--zip-ok``,
-``--exclude-scripts``, and possibly ``--no-deps`` options (``-z``, ``-x`` and
-``-N``, respectively).  Use ``-d`` or ``--install-dir`` to specify the location
-where you'd like the eggs placed.  By placing them in a directory that is
-published to the web, you can then make the eggs available for download, either
-in an intranet or to the internet at large.
-
-If someone distributes a package in the form of a single ``.py`` file, you can
-wrap it in an egg by tacking an ``#egg=name-version`` suffix on the file's URL.
-So, something like this::
-
-    easy_install -f "http://some.example.com/downloads/foo.py#egg=foo-1.0" foo
-
-will install the package as an egg, and this::
-
-    easy_install -zmaxd. \
-        -f "http://some.example.com/downloads/foo.py#egg=foo-1.0" foo
-
-will create a ``.egg`` file in the current directory.
-
-
-Creating your own Package Index
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-In addition to local directories and the Python Package Index, EasyInstall can
-find download links on most any web page whose URL is given to the ``-f``
-(``--find-links``) option.  In the simplest case, you can simply have a web
-page with links to eggs or Python source packages, even an automatically
-generated directory listing (such as the Apache web server provides).
-
-If you are setting up an intranet site for package downloads, you may want to
-configure the target machines to use your download site by default, adding
-something like this to their `configuration files`_:
-
-.. code-block:: ini
-
-    [easy_install]
-    find_links = http://mypackages.example.com/somedir/
-                 http://turbogears.org/download/
-                 http://peak.telecommunity.com/dist/
-
-As you can see, you can list multiple URLs separated by whitespace, continuing
-on multiple lines if necessary (as long as the subsequent lines are indented.
-
-If you are more ambitious, you can also create an entirely custom package index
-or PyPI mirror.  See the ``--index-url`` option under `Command-Line Options`_,
-below, and also the section on `Package Index "API"`_.
-
-
-Password-Protected Sites
-------------------------
-
-If a site you want to download from is password-protected using HTTP "Basic"
-authentication, you can specify your credentials in the URL, like so::
-
-    http://some_userid:some_password@some.example.com/some_path/
-
-You can do this with both index page URLs and direct download URLs.  As long
-as any HTML pages read by easy_install use *relative* links to point to the
-downloads, the same user ID and password will be used to do the downloading.
-
-Using .pypirc Credentials
--------------------------
-
-In additional to supplying credentials in the URL, ``easy_install`` will also
-honor credentials if present in the .pypirc file. Teams maintaining a private
-repository of packages may already have defined access credentials for
-uploading packages according to the distutils documentation. ``easy_install``
-will attempt to honor those if present. Refer to the distutils documentation
-for Python 2.5 or later for details on the syntax.
-
-Controlling Build Options
-~~~~~~~~~~~~~~~~~~~~~~~~~
-
-EasyInstall respects standard distutils `Configuration Files`_, so you can use
-them to configure build options for packages that it installs from source.  For
-example, if you are on Windows using the MinGW compiler, you can configure the
-default compiler by putting something like this:
-
-.. code-block:: ini
-
-    [build]
-    compiler = mingw32
-
-into the appropriate distutils configuration file.  In fact, since this is just
-normal distutils configuration, it will affect any builds using that config
-file, not just ones done by EasyInstall.  For example, if you add those lines
-to ``distutils.cfg`` in the ``distutils`` package directory, it will be the
-default compiler for *all* packages you build.  See `Configuration Files`_
-below for a list of the standard configuration file locations, and links to
-more documentation on using distutils configuration files.
-
-
-Editing and Viewing Source Packages
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Sometimes a package's source distribution  contains additional documentation,
-examples, configuration files, etc., that are not part of its actual code.  If
-you want to be able to examine these files, you can use the ``--editable``
-option to EasyInstall, and EasyInstall will look for a source distribution
-or Subversion URL for the package, then download and extract it or check it out
-as a subdirectory of the ``--build-directory`` you specify.  If you then wish
-to install the package after editing or configuring it, you can do so by
-rerunning EasyInstall with that directory as the target.
-
-Note that using ``--editable`` stops EasyInstall from actually building or
-installing the package; it just finds, obtains, and possibly unpacks it for
-you.  This allows you to make changes to the package if necessary, and to
-either install it in development mode using ``setup.py develop`` (if the
-package uses setuptools, that is), or by running ``easy_install projectdir``
-(where ``projectdir`` is the subdirectory EasyInstall created for the
-downloaded package.
-
-In order to use ``--editable`` (``-e`` for short), you *must* also supply a
-``--build-directory`` (``-b`` for short).  The project will be placed in a
-subdirectory of the build directory.  The subdirectory will have the same
-name as the project itself, but in all-lowercase.  If a file or directory of
-that name already exists, EasyInstall will print an error message and exit.
-
-Also, when using ``--editable``, you cannot use URLs or filenames as arguments.
-You *must* specify project names (and optional version requirements) so that
-EasyInstall knows what directory name(s) to create.  If you need to force
-EasyInstall to use a particular URL or filename, you should specify it as a
-``--find-links`` item (``-f`` for short), and then also specify
-the project name, e.g.::
-
-    easy_install -eb ~/projects \
-     -fhttp://prdownloads.sourceforge.net/ctypes/ctypes-0.9.6.tar.gz?download \
-     ctypes==0.9.6
-
-
-Dealing with Installation Conflicts
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-(NOTE: As of 0.6a11, this section is obsolete; it is retained here only so that
-people using older versions of EasyInstall can consult it.  As of version
-0.6a11, installation conflicts are handled automatically without deleting the
-old or system-installed packages, and without ignoring the issue.  Instead,
-eggs are automatically shifted to the front of ``sys.path`` using special
-code added to the ``easy-install.pth`` file.  So, if you are using version
-0.6a11 or better of setuptools, you do not need to worry about conflicts,
-and the following issues do not apply to you.)
-
-EasyInstall installs distributions in a "managed" way, such that each
-distribution can be independently activated or deactivated on ``sys.path``.
-However, packages that were not installed by EasyInstall are "unmanaged",
-in that they usually live all in one directory and cannot be independently
-activated or deactivated.
-
-As a result, if you are using EasyInstall to upgrade an existing package, or
-to install a package with the same name as an existing package, EasyInstall
-will warn you of the conflict.  (This is an improvement over ``setup.py
-install``, because the ``distutils`` just install new packages on top of old
-ones, possibly combining two unrelated packages or leaving behind modules that
-have been deleted in the newer version of the package.)
-
-EasyInstall will stop the installation if it detects a conflict
-between an existing, "unmanaged" package, and a module or package in any of
-the distributions you're installing.  It will display a list of all of the
-existing files and directories that would need to be deleted for the new
-package to be able to function correctly.  To proceed, you must manually
-delete these conflicting files and directories and re-run EasyInstall.
-
-Of course, once you've replaced all of your existing "unmanaged" packages with
-versions managed by EasyInstall, you won't have any more conflicts to worry
-about!
-
-
-Compressed Installation
-~~~~~~~~~~~~~~~~~~~~~~~
-
-EasyInstall tries to install packages in zipped form, if it can.  Zipping
-packages can improve Python's overall import performance if you're not using
-the ``--multi-version`` option, because Python processes zipfile entries on
-``sys.path`` much faster than it does directories.
-
-As of version 0.5a9, EasyInstall analyzes packages to determine whether they
-can be safely installed as a zipfile, and then acts on its analysis.  (Previous
-versions would not install a package as a zipfile unless you used the
-``--zip-ok`` option.)
-
-The current analysis approach is fairly conservative; it currently looks for:
-
- * Any use of the ``__file__`` or ``__path__`` variables (which should be
-   replaced with ``pkg_resources`` API calls)
-
- * Possible use of ``inspect`` functions that expect to manipulate source files
-   (e.g. ``inspect.getsource()``)
-
- * Top-level modules that might be scripts used with ``python -m`` (Python 2.4)
-
-If any of the above are found in the package being installed, EasyInstall will
-assume that the package cannot be safely run from a zipfile, and unzip it to
-a directory instead.  You can override this analysis with the ``-zip-ok`` flag,
-which will tell EasyInstall to install the package as a zipfile anyway.  Or,
-you can use the ``--always-unzip`` flag, in which case EasyInstall will always
-unzip, even if its analysis says the package is safe to run as a zipfile.
-
-Normally, however, it is simplest to let EasyInstall handle the determination
-of whether to zip or unzip, and only specify overrides when needed to work
-around a problem.  If you find you need to override EasyInstall's guesses, you
-may want to contact the package author and the EasyInstall maintainers, so that
-they can make appropriate changes in future versions.
-
-(Note: If a package uses ``setuptools`` in its setup script, the package author
-has the option to declare the package safe or unsafe for zipped usage via the
-``zip_safe`` argument to ``setup()``.  If the package author makes such a
-declaration, EasyInstall believes the package's author and does not perform its
-own analysis.  However, your command-line option, if any, will still override
-the package author's choice.)
-
-
-Reference Manual
-================
-
-Configuration Files
--------------------
-
-(New in 0.4a2)
-
-You may specify default options for EasyInstall using the standard
-distutils configuration files, under the command heading ``easy_install``.
-EasyInstall will look first for a ``setup.cfg`` file in the current directory,
-then a ``~/.pydistutils.cfg`` or ``$HOME\\pydistutils.cfg`` (on Unix-like OSes
-and Windows, respectively), and finally a ``distutils.cfg`` file in the
-``distutils`` package directory.  Here's a simple example:
-
-.. code-block:: ini
-
-    [easy_install]
-
-    # set the default location to install packages
-    install_dir = /home/me/lib/python
-
-    # Notice that indentation can be used to continue an option
-    # value; this is especially useful for the "--find-links"
-    # option, which tells easy_install to use download links on
-    # these pages before consulting PyPI:
-    #
-    find_links = http://sqlobject.org/
-                 http://peak.telecommunity.com/dist/
-
-In addition to accepting configuration for its own options under
-``[easy_install]``, EasyInstall also respects defaults specified for other
-distutils commands.  For example, if you don't set an ``install_dir`` for
-``[easy_install]``, but *have* set an ``install_lib`` for the ``[install]``
-command, this will become EasyInstall's default installation directory.  Thus,
-if you are already using distutils configuration files to set default install
-locations, build options, etc., EasyInstall will respect your existing settings
-until and unless you override them explicitly in an ``[easy_install]`` section.
-
-For more information, see also the current Python documentation on the `use and
-location of distutils configuration files <https://docs.python.org/install/index.html#inst-config-files>`_.
-
-Notice that ``easy_install`` will use the ``setup.cfg`` from the current
-working directory only if it was triggered from ``setup.py`` through the
-``install_requires`` option. The standalone command will not use that file.
-
-Command-Line Options
---------------------
-
-``--zip-ok, -z``
-    Install all packages as zip files, even if they are marked as unsafe for
-    running as a zipfile.  This can be useful when EasyInstall's analysis
-    of a non-setuptools package is too conservative, but keep in mind that
-    the package may not work correctly.  (Changed in 0.5a9; previously this
-    option was required in order for zipped installation to happen at all.)
-
-``--always-unzip, -Z``
-    Don't install any packages as zip files, even if the packages are marked
-    as safe for running as a zipfile.  This can be useful if a package does
-    something unsafe, but not in a way that EasyInstall can easily detect.
-    EasyInstall's default analysis is currently very conservative, however, so
-    you should only use this option if you've had problems with a particular
-    package, and *after* reporting the problem to the package's maintainer and
-    to the EasyInstall maintainers.
-
-    (Note: the ``-z/-Z`` options only affect the installation of newly-built
-    or downloaded packages that are not already installed in the target
-    directory; if you want to convert an existing installed version from
-    zipped to unzipped or vice versa, you'll need to delete the existing
-    version first, and re-run EasyInstall.)
-
-``--multi-version, -m``
-    "Multi-version" mode. Specifying this option prevents ``easy_install`` from
-    adding an ``easy-install.pth`` entry for the package being installed, and
-    if an entry for any version the package already exists, it will be removed
-    upon successful installation. In multi-version mode, no specific version of
-    the package is available for importing, unless you use
-    ``pkg_resources.require()`` to put it on ``sys.path``. This can be as
-    simple as::
-
-        from pkg_resources import require
-        require("SomePackage", "OtherPackage", "MyPackage")
-
-    which will put the latest installed version of the specified packages on
-    ``sys.path`` for you. (For more advanced uses, like selecting specific
-    versions and enabling optional dependencies, see the ``pkg_resources`` API
-    doc.)
-
-    Changed in 0.6a10: this option is no longer silently enabled when
-    installing to a non-PYTHONPATH, non-"site" directory.  You must always
-    explicitly use this option if you want it to be active.
-
-``--upgrade, -U``   (New in 0.5a4)
-    By default, EasyInstall only searches online if a project/version
-    requirement can't be met by distributions already installed
-    on sys.path or the installation directory.  However, if you supply the
-    ``--upgrade`` or ``-U`` flag, EasyInstall will always check the package
-    index and ``--find-links`` URLs before selecting a version to install.  In
-    this way, you can force EasyInstall to use the latest available version of
-    any package it installs (subject to any version requirements that might
-    exclude such later versions).
-
-``--install-dir=DIR, -d DIR``
-    Set the installation directory. It is up to you to ensure that this
-    directory is on ``sys.path`` at runtime, and to use
-    ``pkg_resources.require()`` to enable the installed package(s) that you
-    need.
-
-    (New in 0.4a2) If this option is not directly specified on the command line
-    or in a distutils configuration file, the distutils default installation
-    location is used.  Normally, this would be the ``site-packages`` directory,
-    but if you are using distutils configuration files, setting things like
-    ``prefix`` or ``install_lib``, then those settings are taken into
-    account when computing the default installation directory, as is the
-    ``--prefix`` option.
-
-``--script-dir=DIR, -s DIR``
-    Set the script installation directory.  If you don't supply this option
-    (via the command line or a configuration file), but you *have* supplied
-    an ``--install-dir`` (via command line or config file), then this option
-    defaults to the same directory, so that the scripts will be able to find
-    their associated package installation.  Otherwise, this setting defaults
-    to the location where the distutils would normally install scripts, taking
-    any distutils configuration file settings into account.
-
-``--exclude-scripts, -x``
-    Don't install scripts.  This is useful if you need to install multiple
-    versions of a package, but do not want to reset the version that will be
-    run by scripts that are already installed.
-
-``--user`` (New in 0.6.11)
-    Use the user-site-packages as specified in :pep:`370`
-    instead of the global site-packages.
-
-``--always-copy, -a``   (New in 0.5a4)
-    Copy all needed distributions to the installation directory, even if they
-    are already present in a directory on sys.path.  In older versions of
-    EasyInstall, this was the default behavior, but now you must explicitly
-    request it.  By default, EasyInstall will no longer copy such distributions
-    from other sys.path directories to the installation directory, unless you
-    explicitly gave the distribution's filename on the command line.
-
-    Note that as of 0.6a10, using this option excludes "system" and
-    "development" eggs from consideration because they can't be reliably
-    copied.  This may cause EasyInstall to choose an older version of a package
-    than what you expected, or it may cause downloading and installation of a
-    fresh copy of something that's already installed.  You will see warning
-    messages for any eggs that EasyInstall skips, before it falls back to an
-    older version or attempts to download a fresh copy.
-
-``--find-links=URLS_OR_FILENAMES, -f URLS_OR_FILENAMES``
-    Scan the specified "download pages" or directories for direct links to eggs
-    or other distributions.  Any existing file or directory names or direct
-    download URLs are immediately added to EasyInstall's search cache, and any
-    indirect URLs (ones that don't point to eggs or other recognized archive
-    formats) are added to a list of additional places to search for download
-    links.  As soon as EasyInstall has to go online to find a package (either
-    because it doesn't exist locally, or because ``--upgrade`` or ``-U`` was
-    used), the specified URLs will be downloaded and scanned for additional
-    direct links.
-
-    Eggs and archives found by way of ``--find-links`` are only downloaded if
-    they are needed to meet a requirement specified on the command line; links
-    to unneeded packages are ignored.
-
-    If all requested packages can be found using links on the specified
-    download pages, the Python Package Index will not be consulted unless you
-    also specified the ``--upgrade`` or ``-U`` option.
-
-    (Note: if you want to refer to a local HTML file containing links, you must
-    use a ``file:`` URL, as filenames that do not refer to a directory, egg, or
-    archive are ignored.)
-
-    You may specify multiple URLs or file/directory names with this option,
-    separated by whitespace.  Note that on the command line, you will probably
-    have to surround the URL list with quotes, so that it is recognized as a
-    single option value.  You can also specify URLs in a configuration file;
-    see `Configuration Files`_, above.
-
-    Changed in 0.6a10: previously all URLs and directories passed to this
-    option were scanned as early as possible, but from 0.6a10 on, only
-    directories and direct archive links are scanned immediately; URLs are not
-    retrieved unless a package search was already going to go online due to a
-    package not being available locally, or due to the use of the ``--update``
-    or ``-U`` option.
-
-``--no-find-links`` Blocks the addition of any link.
-    This parameter is useful if you want to avoid adding links defined in a
-    project easy_install is installing (whether it's a requested project or a
-    dependency). When used, ``--find-links`` is ignored.
-
-    Added in Distribute 0.6.11 and Setuptools 0.7.
-
-``--index-url=URL, -i URL`` (New in 0.4a1; default changed in 0.6c7)
-    Specifies the base URL of the Python Package Index.  The default is
-    https://pypi.org/simple/ if not specified.  When a package is requested
-    that is not locally available or linked from a ``--find-links`` download
-    page, the package index will be searched for download pages for the needed
-    package, and those download pages will be searched for links to download
-    an egg or source distribution.
-
-``--editable, -e`` (New in 0.6a1)
-    Only find and download source distributions for the specified projects,
-    unpacking them to subdirectories of the specified ``--build-directory``.
-    EasyInstall will not actually build or install the requested projects or
-    their dependencies; it will just find and extract them for you.  See
-    `Editing and Viewing Source Packages`_ above for more details.
-
-``--build-directory=DIR, -b DIR`` (UPDATED in 0.6a1)
-    Set the directory used to build source packages.  If a package is built
-    from a source distribution or checkout, it will be extracted to a
-    subdirectory of the specified directory.  The subdirectory will have the
-    same name as the extracted distribution's project, but in all-lowercase.
-    If a file or directory of that name already exists in the given directory,
-    a warning will be printed to the console, and the build will take place in
-    a temporary directory instead.
-
-    This option is most useful in combination with the ``--editable`` option,
-    which forces EasyInstall to *only* find and extract (but not build and
-    install) source distributions.  See `Editing and Viewing Source Packages`_,
-    above, for more information.
-
-``--verbose, -v, --quiet, -q`` (New in 0.4a4)
-    Control the level of detail of EasyInstall's progress messages.  The
-    default detail level is "info", which prints information only about
-    relatively time-consuming operations like running a setup script, unpacking
-    an archive, or retrieving a URL.  Using ``-q`` or ``--quiet`` drops the
-    detail level to "warn", which will only display installation reports,
-    warnings, and errors.  Using ``-v`` or ``--verbose`` increases the detail
-    level to include individual file-level operations, link analysis messages,
-    and distutils messages from any setup scripts that get run.  If you include
-    the ``-v`` option more than once, the second and subsequent uses are passed
-    down to any setup scripts, increasing the verbosity of their reporting as
-    well.
-
-``--dry-run, -n`` (New in 0.4a4)
-    Don't actually install the package or scripts.  This option is passed down
-    to any setup scripts run, so packages should not actually build either.
-    This does *not* skip downloading, nor does it skip extracting source
-    distributions to a temporary/build directory.
-
-``--optimize=LEVEL``, ``-O LEVEL`` (New in 0.4a4)
-    If you are installing from a source distribution, and are *not* using the
-    ``--zip-ok`` option, this option controls the optimization level for
-    compiling installed ``.py`` files to ``.pyo`` files.  It does not affect
-    the compilation of modules contained in ``.egg`` files, only those in
-    ``.egg`` directories.  The optimization level can be set to 0, 1, or 2;
-    the default is 0 (unless it's set under ``install`` or ``install_lib`` in
-    one of your distutils configuration files).
-
-``--record=FILENAME``  (New in 0.5a4)
-    Write a record of all installed files to FILENAME.  This is basically the
-    same as the same option for the standard distutils "install" command, and
-    is included for compatibility with tools that expect to pass this option
-    to "setup.py install".
-
-``--site-dirs=DIRLIST, -S DIRLIST``   (New in 0.6a1)
-    Specify one or more custom "site" directories (separated by commas).
-    "Site" directories are directories where ``.pth`` files are processed, such
-    as the main Python ``site-packages`` directory.  As of 0.6a10, EasyInstall
-    automatically detects whether a given directory processes ``.pth`` files
-    (or can be made to do so), so you should not normally need to use this
-    option.  It is is now only necessary if you want to override EasyInstall's
-    judgment and force an installation directory to be treated as if it
-    supported ``.pth`` files.
-
-``--no-deps, -N``  (New in 0.6a6)
-    Don't install any dependencies.  This is intended as a convenience for
-    tools that wrap eggs in a platform-specific packaging system.  (We don't
-    recommend that you use it for anything else.)
-
-``--allow-hosts=PATTERNS, -H PATTERNS``   (New in 0.6a6)
-    Restrict downloading and spidering to hosts matching the specified glob
-    patterns.  E.g. ``-H *.python.org`` restricts web access so that only
-    packages listed and downloadable from machines in the ``python.org``
-    domain.  The glob patterns must match the *entire* user/host/port section of
-    the target URL(s).  For example, ``*.python.org`` will NOT accept a URL
-    like ``http://python.org/foo`` or ``http://www.python.org:8080/``.
-    Multiple patterns can be specified by separating them with commas.  The
-    default pattern is ``*``, which matches anything.
-
-    In general, this option is mainly useful for blocking EasyInstall's web
-    access altogether (e.g. ``-Hlocalhost``), or to restrict it to an intranet
-    or other trusted site.  EasyInstall will do the best it can to satisfy
-    dependencies given your host restrictions, but of course can fail if it
-    can't find suitable packages.  EasyInstall displays all blocked URLs, so
-    that you can adjust your ``--allow-hosts`` setting if it is more strict
-    than you intended.  Some sites may wish to define a restrictive default
-    setting for this option in their `configuration files`_, and then manually
-    override the setting on the command line as needed.
-
-``--prefix=DIR`` (New in 0.6a10)
-    Use the specified directory as a base for computing the default
-    installation and script directories.  On Windows, the resulting default
-    directories will be ``prefix\\Lib\\site-packages`` and ``prefix\\Scripts``,
-    while on other platforms the defaults will be
-    ``prefix/lib/python2.X/site-packages`` (with the appropriate version
-    substituted) for libraries and ``prefix/bin`` for scripts.
-
-    Note that the ``--prefix`` option only sets the *default* installation and
-    script directories, and does not override the ones set on the command line
-    or in a configuration file.
-
-``--local-snapshots-ok, -l`` (New in 0.6c6)
-    Normally, EasyInstall prefers to only install *released* versions of
-    projects, not in-development ones, because such projects may not
-    have a currently-valid version number.  So, it usually only installs them
-    when their ``setup.py`` directory is explicitly passed on the command line.
-
-    However, if this option is used, then any in-development projects that were
-    installed using the ``setup.py develop`` command, will be used to build
-    eggs, effectively upgrading the "in-development" project to a snapshot
-    release.  Normally, this option is used only in conjunction with the
-    ``--always-copy`` option to create a distributable snapshot of every egg
-    needed to run an application.
-
-    Note that if you use this option, you must make sure that there is a valid
-    version number (such as an SVN revision number tag) for any in-development
-    projects that may be used, as otherwise EasyInstall may not be able to tell
-    what version of the project is "newer" when future installations or
-    upgrades are attempted.
-
-
-.. _non-root installation:
-
-Custom Installation Locations
------------------------------
-
-By default, EasyInstall installs python packages into Python's main ``site-packages`` directory,
-and manages them using a custom ``.pth`` file in that same directory.
-
-Very often though, a user or developer wants ``easy_install`` to install and manage python packages
-in an alternative location, usually for one of 3 reasons:
-
-1. They don't have access to write to the main Python site-packages directory.
-
-2. They want a user-specific stash of packages, that is not visible to other users.
-
-3. They want to isolate a set of packages to a specific python application, usually to minimize
-   the possibility of version conflicts.
-
-Historically, there have been many approaches to achieve custom installation.
-The following section lists only the easiest and most relevant approaches [1]_.
-
-`Use the "--user" option`_
-
-`Use the "--user" option and customize "PYTHONUSERBASE"`_
-
-`Use "virtualenv"`_
-
-.. [1] There are older ways to achieve custom installation using various ``easy_install`` and ``setup.py install`` options, combined with ``PYTHONPATH`` and/or ``PYTHONUSERBASE`` alterations, but all of these are effectively deprecated by the User scheme brought in by `PEP-370`_.
-
-.. _PEP-370: http://www.python.org/dev/peps/pep-0370/
-
-
-Use the "--user" option
-~~~~~~~~~~~~~~~~~~~~~~~
-Python provides a User scheme for installation, which means that all
-python distributions support an alternative install location that is specific to a user [3]_.
-The Default location for each OS is explained in the python documentation
-for the ``site.USER_BASE`` variable.  This mode of installation can be turned on by
-specifying the ``--user`` option to ``setup.py install`` or ``easy_install``.
-This approach serves the need to have a user-specific stash of packages.
-
-.. [3] Prior to the User scheme, there was the Home scheme, which is still available, but requires more effort than the User scheme to get packages recognized.
-
-Use the "--user" option and customize "PYTHONUSERBASE"
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-The User scheme install location can be customized by setting the ``PYTHONUSERBASE`` environment
-variable, which updates the value of ``site.USER_BASE``.  To isolate packages to a specific
-application, simply set the OS environment of that application to a specific value of
-``PYTHONUSERBASE``, that contains just those packages.
-
-Use "virtualenv"
-~~~~~~~~~~~~~~~~
-"virtualenv" is a 3rd-party python package that effectively "clones" a python installation, thereby
-creating an isolated location to install packages.  The evolution of "virtualenv" started before the existence
-of the User installation scheme.  "virtualenv" provides a version of ``easy_install`` that is
-scoped to the cloned python install and is used in the normal way. "virtualenv" does offer various features
-that the User installation scheme alone does not provide, e.g. the ability to hide the main python site-packages.
-
-Please refer to the `virtualenv`_ documentation for more details.
-
-.. _virtualenv: https://pypi.org/project/virtualenv/
-
-
-
-Package Index "API"
--------------------
-
-Custom package indexes (and PyPI) must follow the following rules for
-EasyInstall to be able to look up and download packages:
-
-1. Except where stated otherwise, "pages" are HTML or XHTML, and "links"
-   refer to ``href`` attributes.
-
-2. Individual project version pages' URLs must be of the form
-   ``base/projectname/version``, where ``base`` is the package index's base URL.
-
-3. Omitting the ``/version`` part of a project page's URL (but keeping the
-   trailing ``/``) should result in a page that is either:
-
-   a) The single active version of that project, as though the version had been
-      explicitly included, OR
-
-   b) A page with links to all of the active version pages for that project.
-
-4. Individual project version pages should contain direct links to downloadable
-   distributions where possible.  It is explicitly permitted for a project's
-   "long_description" to include URLs, and these should be formatted as HTML
-   links by the package index, as EasyInstall does no special processing to
-   identify what parts of a page are index-specific and which are part of the
-   project's supplied description.
-
-5. Where available, MD5 information should be added to download URLs by
-   appending a fragment identifier of the form ``#md5=...``, where ``...`` is
-   the 32-character hex MD5 digest.  EasyInstall will verify that the
-   downloaded file's MD5 digest matches the given value.
-
-6. Individual project version pages should identify any "homepage" or
-   "download" URLs using ``rel="homepage"`` and ``rel="download"`` attributes
-   on the HTML elements linking to those URLs. Use of these attributes will
-   cause EasyInstall to always follow the provided links, unless it can be
-   determined by inspection that they are downloadable distributions. If the
-   links are not to downloadable distributions, they are retrieved, and if they
-   are HTML, they are scanned for download links. They are *not* scanned for
-   additional "homepage" or "download" links, as these are only processed for
-   pages that are part of a package index site.
-
-7. The root URL of the index, if retrieved with a trailing ``/``, must result
-   in a page containing links to *all* projects' active version pages.
-
-   (Note: This requirement is a workaround for the absence of case-insensitive
-   ``safe_name()`` matching of project names in URL paths. If project names are
-   matched in this fashion (e.g. via the PyPI server, mod_rewrite, or a similar
-   mechanism), then it is not necessary to include this all-packages listing
-   page.)
-
-8. If a package index is accessed via a ``file://`` URL, then EasyInstall will
-   automatically use ``index.html`` files, if present, when trying to read a
-   directory with a trailing ``/`` on the URL.
diff --git a/docs/index.txt b/docs/index.txt
index 13a46e74..c251260d 100644
--- a/docs/index.txt
+++ b/docs/index.txt
@@ -21,5 +21,4 @@ Documentation content:
    python3
    development
    roadmap
-   Deprecated: Easy Install <easy_install>
    history
diff --git a/easy_install.py b/easy_install.py
deleted file mode 100644
index d87e9840..00000000
--- a/easy_install.py
+++ /dev/null
@@ -1,5 +0,0 @@
-"""Run the EasyInstall command"""
-
-if __name__ == '__main__':
-    from setuptools.command.easy_install import main
-    main()
diff --git a/setup.cfg b/setup.cfg
index 42a3d86c..385ba14d 100644
--- a/setup.cfg
+++ b/setup.cfg
@@ -51,7 +51,6 @@ classifiers =
 [options]
 zip_safe = True
 python_requires = >=2.7,!=3.0.*,!=3.1.*,!=3.2.*,!=3.3.*
-py_modules = easy_install
 packages = find:
 
 [options.packages.find]
diff --git a/setup.py b/setup.py
index d97895fc..59efc237 100755
--- a/setup.py
+++ b/setup.py
@@ -31,22 +31,6 @@ def read_commands():
     return command_ns['__all__']
 
 
-def _gen_console_scripts():
-    yield "easy_install = setuptools.command.easy_install:main"
-
-    # Gentoo distributions manage the python-version-specific scripts
-    # themselves, so those platforms define an environment variable to
-    # suppress the creation of the version-specific scripts.
-    var_names = (
-        'SETUPTOOLS_DISABLE_VERSIONED_EASY_INSTALL_SCRIPT',
-        'DISTRIBUTE_DISABLE_VERSIONED_EASY_INSTALL_SCRIPT',
-    )
-    if any(os.environ.get(var) not in (None, "", "0") for var in var_names):
-        return
-    tmpl = "easy_install-{shortver} = setuptools.command.easy_install:main"
-    yield tmpl.format(shortver='{}.{}'.format(*sys.version_info))
-
-
 package_data = dict(
     setuptools=['script (dev).tmpl', 'script.tmpl', 'site-patch.py'],
 )
@@ -125,9 +109,6 @@ setup_params = dict(
             "depends.txt = setuptools.command.egg_info:warn_depends_obsolete",
             "dependency_links.txt = setuptools.command.egg_info:overwrite_arg",
         ],
-        "console_scripts": list(_gen_console_scripts()),
-        "setuptools.installation":
-            ['eggsecutable = setuptools.command.easy_install:bootstrap'],
     },
     dependency_links=[
         pypi_link(
diff --git a/setuptools/command/easy_install.py b/setuptools/command/easy_install.py
index 545c3c44..9d350ac0 100644
--- a/setuptools/command/easy_install.py
+++ b/setuptools/command/easy_install.py
@@ -73,7 +73,7 @@ warnings.filterwarnings("default", category=pkg_resources.PEP440Warning)
 
 __all__ = [
     'samefile', 'easy_install', 'PthDistributions', 'extract_wininst_cfg',
-    'main', 'get_exe_prefixes',
+    'get_exe_prefixes',
 ]
 
 
@@ -2283,59 +2283,6 @@ def current_umask():
     return tmp
 
 
-def bootstrap():
-    # This function is called when setuptools*.egg is run using /bin/sh
-    import setuptools
-
-    argv0 = os.path.dirname(setuptools.__path__[0])
-    sys.argv[0] = argv0
-    sys.argv.append(argv0)
-    main()
-
-
-def main(argv=None, **kw):
-    from setuptools import setup
-    from setuptools.dist import Distribution
-
-    class DistributionWithoutHelpCommands(Distribution):
-        common_usage = ""
-
-        def _show_help(self, *args, **kw):
-            with _patch_usage():
-                Distribution._show_help(self, *args, **kw)
-
-    if argv is None:
-        argv = sys.argv[1:]
-
-    with _patch_usage():
-        setup(
-            script_args=['-q', 'easy_install', '-v'] + argv,
-            script_name=sys.argv[0] or 'easy_install',
-            distclass=DistributionWithoutHelpCommands,
-            **kw
-        )
-
-
-@contextlib.contextmanager
-def _patch_usage():
-    import distutils.core
-    USAGE = textwrap.dedent("""
-        usage: %(script)s [options] requirement_or_url ...
-           or: %(script)s --help
-        """).lstrip()
-
-    def gen_usage(script_name):
-        return USAGE % dict(
-            script=os.path.basename(script_name),
-        )
-
-    saved = distutils.core.gen_usage
-    distutils.core.gen_usage = gen_usage
-    try:
-        yield
-    finally:
-        distutils.core.gen_usage = saved
-
 class EasyInstallDeprecationWarning(SetuptoolsDeprecationWarning):
     """Class for warning about deprecations in EasyInstall in SetupTools. Not ignored by default, unlike DeprecationWarning."""
     
diff --git a/setuptools/tests/test_easy_install.py b/setuptools/tests/test_easy_install.py
index aa75899a..68319c2f 100644
--- a/setuptools/tests/test_easy_install.py
+++ b/setuptools/tests/test_easy_install.py
@@ -467,22 +467,24 @@ class TestSetupRequires:
         """
         monkeypatch.setenv(str('PIP_RETRIES'), str('0'))
         monkeypatch.setenv(str('PIP_TIMEOUT'), str('0'))
-        with contexts.quiet():
-            # create an sdist that has a build-time dependency.
-            with TestSetupRequires.create_sdist() as dist_file:
-                with contexts.tempdir() as temp_install_dir:
-                    with contexts.environment(PYTHONPATH=temp_install_dir):
-                        ei_params = [
-                            '--index-url', mock_index.url,
-                            '--exclude-scripts',
-                            '--install-dir', temp_install_dir,
-                            dist_file,
-                        ]
-                        with sandbox.save_argv(['easy_install']):
-                            # attempt to install the dist. It should
-                            # fail because it doesn't exist.
-                            with pytest.raises(SystemExit):
-                                easy_install_pkg.main(ei_params)
+        monkeypatch.setenv(str('PIP_VERBOSE'), str('1'))
+        # create an sdist that has a build-time dependency.
+        with TestSetupRequires.create_sdist() as dist_file:
+            with contexts.tempdir() as temp_dir:
+                setup_py = os.path.join(temp_dir, 'setup.py')
+                with open(setup_py, 'w') as fp:
+                    fp.write('__import__("setuptools").setup()')
+                temp_install_dir = os.path.join(temp_dir, 'target')
+                os.mkdir(temp_install_dir)
+                with contexts.environment(PYTHONPATH=temp_install_dir):
+                    # attempt to install the dist. It should
+                    # fail because it doesn't exist.
+                    with pytest.raises(SystemExit):
+                        run_setup(setup_py, ['easy_install',
+                                             '--exclude-scripts',
+                                             '--index-url', mock_index.url,
+                                             '--install-dir', temp_install_dir,
+                                             dist_file])
         # there should have been one requests to the server
         assert [r.path for r in mock_index.requests] == ['/does-not-exist/']
 
diff --git a/setuptools/tests/test_namespaces.py b/setuptools/tests/test_namespaces.py
index f937d981..3c5df68a 100644
--- a/setuptools/tests/test_namespaces.py
+++ b/setuptools/tests/test_namespaces.py
@@ -64,9 +64,8 @@ class TestNamespaces:
         target.mkdir()
         install_cmd = [
             sys.executable,
-            '-m', 'easy_install',
-            '-d', str(target),
-            str(pkg),
+            '-m', 'pip.__main__', 'install',
+            '-t', str(target), str(pkg),
         ]
         with test.test.paths_on_pythonpath([str(target)]):
             subprocess.check_call(install_cmd)