diff options
Diffstat (limited to 'liboverlay/overlayMdpRot.cpp')
-rw-r--r-- | liboverlay/overlayMdpRot.cpp | 258 |
1 files changed, 258 insertions, 0 deletions
diff --git a/liboverlay/overlayMdpRot.cpp b/liboverlay/overlayMdpRot.cpp new file mode 100644 index 000000000..f96ddb7ca --- /dev/null +++ b/liboverlay/overlayMdpRot.cpp @@ -0,0 +1,258 @@ +/* + * Copyright (C) 2008 The Android Open Source Project + * Copyright (c) 2010-2012, The Linux Foundation. All rights reserved. + * Not a Contribution, Apache license notifications and license are retained + * for attribution purposes only. + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. +*/ + +#include "overlayUtils.h" +#include "overlayRotator.h" + +namespace ovutils = overlay::utils; + +namespace overlay { + +MdpRot::MdpRot() { + reset(); + init(); +} + +MdpRot::~MdpRot() { close(); } + +void MdpRot::setEnable() { mRotImgInfo.enable = 1; } + +void MdpRot::setDisable() { mRotImgInfo.enable = 0; } + +bool MdpRot::enabled() const { return mRotImgInfo.enable; } + +void MdpRot::setRotations(uint32_t r) { mRotImgInfo.rotations = r; } + +int MdpRot::getDstMemId() const { + return mRotDataInfo.dst.memory_id; +} + +uint32_t MdpRot::getDstOffset() const { + return mRotDataInfo.dst.offset; +} + +uint32_t MdpRot::getSessId() const { return mRotImgInfo.session_id; } + +void MdpRot::setSrcFB() { + mRotDataInfo.src.flags |= MDP_MEMORY_ID_TYPE_FB; +} + +void MdpRot::save() { + mLSRotImgInfo = mRotImgInfo; +} + +bool MdpRot::rotConfChanged() const { + // 0 means same + if(0 == ::memcmp(&mRotImgInfo, &mLSRotImgInfo, + sizeof (msm_rotator_img_info))) { + return false; + } + return true; +} + +bool MdpRot::init() +{ + if(!mFd.open(Res::rotPath, O_RDWR)){ + ALOGE("MdpRot failed to init %s", Res::rotPath); + return false; + } + return true; +} + +void MdpRot::setSource(const overlay::utils::Whf& awhf) { + utils::Whf whf(awhf); + + mRotImgInfo.src.format = whf.format; + if(whf.format == MDP_Y_CRCB_H2V2_TILE || + whf.format == MDP_Y_CBCR_H2V2_TILE) { + whf.w = utils::alignup(awhf.w, 64); + whf.h = utils::alignup(awhf.h, 32); + } + + mRotImgInfo.src.width = whf.w; + mRotImgInfo.src.height = whf.h; + + mRotImgInfo.src_rect.w = whf.w; + mRotImgInfo.src_rect.h = whf.h; + + mRotImgInfo.dst.width = whf.w; + mRotImgInfo.dst.height = whf.h; + + mBufSize = awhf.size; +} + +void MdpRot::setFlags(const utils::eMdpFlags& flags) { + mRotImgInfo.secure = 0; + if(flags & utils::OV_MDP_SECURE_OVERLAY_SESSION) + mRotImgInfo.secure = 1; +} + +void MdpRot::setTransform(const utils::eTransform& rot, const bool& rotUsed) +{ + int r = utils::getMdpOrient(rot); + setRotations(r); + //getMdpOrient will switch the flips if the source is 90 rotated. + //Clients in Android dont factor in 90 rotation while deciding the flip. + mOrientation = static_cast<utils::eTransform>(r); + ALOGE_IF(DEBUG_OVERLAY, "%s: r=%d", __FUNCTION__, r); + + setDisable(); + if(rotUsed) { + setEnable(); + } +} + +void MdpRot::doTransform() { + if(mOrientation & utils::OVERLAY_TRANSFORM_ROT_90) + utils::swap(mRotImgInfo.dst.width, mRotImgInfo.dst.height); +} + +bool MdpRot::commit() { + doTransform(); + if(rotConfChanged()) { + if(!overlay::mdp_wrapper::startRotator(mFd.getFD(), mRotImgInfo)) { + ALOGE("MdpRot commit failed"); + dump(); + return false; + } + save(); + mRotDataInfo.session_id = mRotImgInfo.session_id; + } + return true; +} + +bool MdpRot::open_i(uint32_t numbufs, uint32_t bufsz) +{ + OvMem mem; + + OVASSERT(MAP_FAILED == mem.addr(), "MAP failed in open_i"); + + if(!mem.open(numbufs, bufsz, mRotImgInfo.secure)){ + ALOGE("%s: Failed to open", __func__); + mem.close(); + return false; + } + + OVASSERT(MAP_FAILED != mem.addr(), "MAP failed"); + OVASSERT(mem.getFD() != -1, "getFd is -1"); + + mRotDataInfo.dst.memory_id = mem.getFD(); + mRotDataInfo.dst.offset = 0; + mMem.curr().m = mem; + return true; +} + +bool MdpRot::close() { + bool success = true; + if(mFd.valid() && (getSessId() != 0)) { + if(!mdp_wrapper::endRotator(mFd.getFD(), getSessId())) { + ALOGE("Mdp Rot error endRotator, fd=%d sessId=%u", + mFd.getFD(), getSessId()); + success = false; + } + } + if (!mFd.close()) { + ALOGE("Mdp Rot error closing fd"); + success = false; + } + if (!mMem.close()) { + ALOGE("Mdp Rot error closing mem"); + success = false; + } + reset(); + return success; +} + +bool MdpRot::remap(uint32_t numbufs) { + // if current size changed, remap + if(mBufSize == mMem.curr().size()) { + ALOGE_IF(DEBUG_OVERLAY, "%s: same size %d", __FUNCTION__, mBufSize); + return true; + } + + ALOGE_IF(DEBUG_OVERLAY, "%s: size changed - remapping", __FUNCTION__); + OVASSERT(!mMem.prev().valid(), "Prev should not be valid"); + + // ++mMem will make curr to be prev, and prev will be curr + ++mMem; + if(!open_i(numbufs, mBufSize)) { + ALOGE("%s Error could not open", __FUNCTION__); + return false; + } + for (uint32_t i = 0; i < numbufs; ++i) { + mMem.curr().mRotOffset[i] = i * mBufSize; + } + return true; +} + +void MdpRot::reset() { + ovutils::memset0(mRotImgInfo); + ovutils::memset0(mLSRotImgInfo); + ovutils::memset0(mRotDataInfo); + ovutils::memset0(mMem.curr().mRotOffset); + ovutils::memset0(mMem.prev().mRotOffset); + mMem.curr().mCurrOffset = 0; + mMem.prev().mCurrOffset = 0; + mBufSize = 0; + mOrientation = utils::OVERLAY_TRANSFORM_0; +} + +bool MdpRot::queueBuffer(int fd, uint32_t offset) { + if(enabled()) { + mRotDataInfo.src.memory_id = fd; + mRotDataInfo.src.offset = offset; + + remap(RotMem::Mem::ROT_NUM_BUFS); + OVASSERT(mMem.curr().m.numBufs(), + "queueBuffer numbufs is 0"); + mRotDataInfo.dst.offset = + mMem.curr().mRotOffset[mMem.curr().mCurrOffset]; + mMem.curr().mCurrOffset = + (mMem.curr().mCurrOffset + 1) % mMem.curr().m.numBufs(); + + if(!overlay::mdp_wrapper::rotate(mFd.getFD(), mRotDataInfo)) { + ALOGE("MdpRot failed rotate"); + dump(); + return false; + } + + // if the prev mem is valid, we need to close + if(mMem.prev().valid()) { + // FIXME if no wait for vsync the above + // play will return immediatly and might cause + // tearing when prev.close is called. + if(!mMem.prev().close()) { + ALOGE("%s error in closing prev rot mem", __FUNCTION__); + return false; + } + } + } + return true; +} + +void MdpRot::dump() const { + ALOGE("== Dump MdpRot start =="); + mFd.dump(); + mMem.curr().m.dump(); + mdp_wrapper::dump("mRotImgInfo", mRotImgInfo); + mdp_wrapper::dump("mRotDataInfo", mRotDataInfo); + ALOGE("== Dump MdpRot end =="); +} + +} // namespace overlay |