path: root/audio/5.0/types.hal

/*
 * Copyright (C) 2018 The Android Open Source Project
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

package android.hardware.audio@5.0;

import android.hardware.audio.common@5.0;

enum Result : int32_t {
    OK,
    NOT_INITIALIZED,
    INVALID_ARGUMENTS,
    INVALID_STATE,
    /**
     * Methods marked as "Optional method" must return this result value
     * if the operation is not supported by HAL.
     */
    NOT_SUPPORTED
};

@export(name="audio_drain_type_t", value_prefix="AUDIO_DRAIN_")
enum AudioDrain : int32_t {
    /** drain() returns when all data has been played. */
    ALL,
    /**
     * drain() returns a short time before all data from the current track has
     * been played to give time for gapless track switch.
     */
    EARLY_NOTIFY
};

/**
 * A substitute for POSIX timespec.
 */
struct TimeSpec {
    uint64_t tvSec;   // seconds
    uint64_t tvNSec;  // nanoseconds
};

/**
 * IEEE 802 MAC address.
 */
typedef uint8_t[6] MacAddress;

struct ParameterValue {
    string key;
    string value;
};

/**
 * Specifies a device in case when several devices of the same type
 * can be connected (e.g. BT A2DP, USB).
 */
struct DeviceAddress {
    AudioDevice device;  // discriminator
    union Address {
        MacAddress mac;     // used for BLUETOOTH_A2DP_*
        uint8_t[4] ipv4;    // used for IP
        struct Alsa {
            int32_t card;
            int32_t device;
        } alsa;             // used for USB_*
    } address;
    string busAddress;      // used for BUS
    string rSubmixAddress;  // used for REMOTE_SUBMIX
};

enum MmapBufferFlag : uint32_t {
    NONE    = 0x0,
    /**
     * If the buffer can be securely shared to untrusted applications
     * through the AAudio exclusive mode.
     * Only set this flag if applications are restricted from accessing the
     * memory surrounding the audio data buffer by a kernel mechanism.
     * See Linux kernel's dma_buf.
     */
    APPLICATION_SHAREABLE    = 0x1,
};

/**
 * Mmap buffer descriptor returned by IStream.createMmapBuffer().
 * Used by streams opened in mmap mode.
 */
struct MmapBufferInfo {
    /** Mmap memory buffer */
    memory  sharedMemory;
    /** Total buffer size in frames */
    uint32_t bufferSizeFrames;
    /** Transfer size granularity in frames */
    uint32_t burstSizeFrames;
    /** Attributes describing the buffer. */
    bitfield<MmapBufferFlag> flags;
};

/**
 * Mmap buffer read/write position returned by IStream.getMmapPosition().
 * Used by streams opened in mmap mode.
 */
struct MmapPosition {
    int64_t  timeNanoseconds; // time stamp in ns, CLOCK_MONOTONIC
    int32_t  positionFrames;  // increasing 32 bit frame count reset when IStream.stop() is called
};

/**
 * The message queue flags used to synchronize reads and writes from
 * message queues used by StreamIn and StreamOut.
 */
enum MessageQueueFlagBits : uint32_t {
    NOT_EMPTY = 1 << 0,
    NOT_FULL = 1 << 1
};

/** Metadata of a playback track for a StreamOut. */
struct PlaybackTrackMetadata {
    AudioUsage usage;
    AudioContentType contentType;
    /**
     * Positive linear gain applied to the track samples. 0 being muted and 1 is no attenuation,
     * 2 means double amplification...
     * Must not be negative.
     */
    float gain;
};

/** Metadatas of the source of a StreamOut. */
struct SourceMetadata {
    vec<PlaybackTrackMetadata> tracks;
};

/** Metadata of a record track for a StreamIn. */
struct RecordTrackMetadata {
    AudioSource source;
    /**
     * Positive linear gain applied to the track samples. 0 being muted and 1 is no attenuation,
     * 2 means double amplification...
     * Must not be negative.
     */
    float gain;
};

/** Metadatas of the source of a StreamIn. */
struct SinkMetadata {
    vec<RecordTrackMetadata> tracks;
};

/*
 * Microphone information
 *
 */

/**
 * A 3D point used to represent position or orientation of a microphone.
 *
 * Position: Coordinates of the microphone's capsule, in meters, from the
 * bottom-left-back corner of the bounding box of android device in natural
 * orientation (PORTRAIT for phones, LANDSCAPE for tablets, tvs, etc).
 * The orientation musth match the reported by the api Display.getRotation().
 *
 * Orientation: Normalized vector to signal the main orientation of the
 * microphone's capsule. Magnitude = sqrt(x^2 + y^2 + z^2) = 1
 */
struct AudioMicrophoneCoordinate {
    float x;
    float y;
    float z;
};

/**
 * Enum to identify the type of channel mapping for active microphones.
 * Used channels further identify if the microphone has any significative
 * process (e.g. High Pass Filtering, dynamic compression)
 * Simple processing as constant gain adjustment must be DIRECT.
 */
enum AudioMicrophoneChannelMapping : uint32_t {
    UNUSED      = 0, /* Channel not used */
    DIRECT      = 1, /* Channel used and signal not processed */
    PROCESSED   = 2, /* Channel used and signal has some process */
};

/**
 * Enum to identify locations of microphones in regards to the body of the
 * android device.
 */
enum AudioMicrophoneLocation : uint32_t {
    UNKNOWN             = 0,
    MAINBODY            = 1,
    MAINBODY_MOVABLE    = 2,
    PERIPHERAL          = 3,
};

/**
 * Identifier to help group related microphones together
 * e.g. microphone arrays should belong to the same group
 */
typedef int32_t AudioMicrophoneGroup;

/**
 * Enum with standard polar patterns of microphones
 */
enum AudioMicrophoneDirectionality : uint32_t {
    UNKNOWN         = 0,
    OMNI            = 1,
    BI_DIRECTIONAL  = 2,
    CARDIOID        = 3,
    HYPER_CARDIOID  = 4,
    SUPER_CARDIOID  = 5,
};

/**
 * A (frequency, level) pair. Used to represent frequency response.
 */
struct AudioFrequencyResponsePoint {
    /** In Hz */
    float frequency;
    /** In dB */
    float level;
};

/**
 * Structure used by the HAL to describe microphone's characteristics
 * Used by StreamIn and Device
 */
struct MicrophoneInfo {
    /** Unique alphanumeric id for microphone. Guaranteed to be the same
     * even after rebooting.
     */
    string                                  deviceId;
    /**
     * Device specific information
     */
    DeviceAddress                           deviceAddress;
    /** Each element of the vector must describe the channel with the same
     *  index.
     */
    vec<AudioMicrophoneChannelMapping>      channelMapping;
    /** Location of the microphone in regard to the body of the device */
    AudioMicrophoneLocation                 location;
    /** Identifier to help group related microphones together
     *  e.g. microphone arrays should belong to the same group
     */
    AudioMicrophoneGroup                    group;
    /** Index of this microphone within the group.
     *  (group, index) must be unique within the same device.
     */
    uint32_t                                indexInTheGroup;
    /** Level in dBFS produced by a 1000 Hz tone at 94 dB SPL */
    float                                   sensitivity;
    /** Level in dB of the max SPL supported at 1000 Hz */
    float                                   maxSpl;
    /** Level in dB of the min SPL supported at 1000 Hz */
    float                                   minSpl;
    /** Standard polar pattern of the microphone */
    AudioMicrophoneDirectionality           directionality;
    /** Vector with ordered frequency responses (from low to high frequencies)
     *  with the frequency response of the microphone.
     *  Levels are in dB, relative to level at 1000 Hz
     */
    vec<AudioFrequencyResponsePoint>        frequencyResponse;
    /** Position of the microphone's capsule in meters, from the
     *  bottom-left-back corner of the bounding box of device.
     */
    AudioMicrophoneCoordinate               position;
    /** Normalized point to signal the main orientation of the microphone's
     *  capsule. sqrt(x^2 + y^2 + z^2) = 1
     */
    AudioMicrophoneCoordinate               orientation;
};