Fix btwrite timer timeout for Angler (1/2)

1. For vnd_angler.txt:
Set PROC_BTWRITE_TIMER_TIMEOUT_MS to 0
to avoid upio start and stop timer when LMP
is enabled and BT_WAKE is asserted and
de-asserted. This time is useless and would
set btwrite to 0 by mistake even when host
is sending data to UART, and this would
de-assert BT_WAKE by mistake.

2. For hardware.c:
For chipset 4358 we need to set LPM_HC_IDLE_THRESHOLD
to 24, so we need to reduce the multiplier
to make timeout_ms a reasonable value. Without
modification, the timeout_ms would be 36000ms
which is too large.

3. For upio.c:
Need to set lmp_proc_cb.btwrite_active even though
PROC_BTWRITE_TIMER_TIMEOUT_MS is set to 0.
Otherwise, btwrite would be written very frequently.

Bug: 23248798
Change-Id: Ie55c346785679e51a771d5e46270c0858e6082ee

1 files changed, 2 insertions, 1 deletions

diff --git a/src/hardware.c b/src/hardware.c
index 02103ca..10bf22b 100755
--- a/src/hardware.c
+++ b/src/hardware.c
@@ -1211,9 +1211,10 @@ uint32_t hw_lpm_get_idle_timeout(void)
      */
     timeout_ms = (uint32_t)lpm_param.host_stack_idle_threshold \
                             * LPM_IDLE_TIMEOUT_MULTIPLE;
-
     if (strstr(hw_cfg_cb.local_chip_name, "BCM4325") != NULL)
         timeout_ms *= 25; // 12.5 or 25 ?
+    else if (strstr(hw_cfg_cb.local_chip_name, "BCM4358") != NULL)
+        timeout_ms *= 50;
     else
         timeout_ms *= 300;