aboutsummaryrefslogtreecommitdiffstats
path: root/src/common
Commit message (Collapse)AuthorAgeFilesLines
* Clear PMK length and check for this when deriving PTKJouni Malinen2017-10-192-0/+6
| | | | | | | | | | Instead of setting the default PMK length for the cleared PMK, set the length to 0 and explicitly check for this when deriving PTK to avoid unexpected key derivation with an all-zeroes key should it be possible to somehow trigger PTK derivation to happen before PMK derivation. Change-Id: Ifef3b2ca5ee19e6e89df75fef697e7215f926cb1 Signed-off-by: Jouni Malinen <j@w1.fi>
* Remove all PeerKey functionalityJouni Malinen2017-10-193-27/+0
| | | | | | | | | | | | | | | | | | | | | | | | | This was originally added to allow the IEEE 802.11 protocol to be tested, but there are no known fully functional implementations based on this nor any known deployments of PeerKey functionality. Furthermore, PeerKey design in the IEEE Std 802.11-2016 standard has already been marked as obsolete for DLS and it is being considered for complete removal in REVmd. This implementation did not really work, so it could not have been used in practice. For example, key configuration was using incorrect algorithm values (WPA_CIPHER_* instead of WPA_ALG_*) which resulted in mapping to an invalid WPA_ALG_* value for the actual driver operation. As such, the derived key could not have been successfully set for the link. Since there are bugs in this implementation and there does not seem to be any future for the PeerKey design with DLS (TDLS being the future for DLS), the best approach is to simply delete all this code to simplify the EAPOL-Key handling design and to get rid of any potential issues if these code paths were accidentially reachable. Change-Id: I10294a9ef31c46a27416a6063255939dcedc57d5 Signed-off-by: Jouni Malinen <j@w1.fi>
* Prevent installation of an all-zero TKMathy Vanhoef2017-10-191-0/+1
| | | | | | | | | | | | | | | Properly track whether a PTK has already been installed to the driver and the TK part cleared from memory. This prevents an attacker from trying to trick the client into installing an all-zero TK. This fixes the earlier fix in commit ad00d64e7d8827b3cebd665a0ceb08adabf15e1e ('Fix TK configuration to the driver in EAPOL-Key 3/4 retry case') which did not take into account possibility of an extra message 1/4 showing up between retries of message 3/4. Change-Id: I6b5f6f2a1c0495575eb5a1576462768ddc89f09c Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@cs.kuleuven.be>
* Prevent reinstallation of an already in-use group keyMathy Vanhoef2017-10-191-0/+11
| | | | | | | | | | | Track the current GTK and IGTK that is in use and when receiving a (possibly retransmitted) Group Message 1 or WNM-Sleep Mode Response, do not install the given key if it is already in use. This prevents an attacker from trying to trick the client into resetting or lowering the sequence counter associated to the group key. Change-Id: Ib0565e90e62115cc91ac36be3dae3b064e1baa1e Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@cs.kuleuven.be>
* P2P: Trigger event when invitation is acceptedLior David2016-04-201-0/+1
| | | | | | | | | | | | | | Trigger an event when wpa_supplicant accepts an invitation to re-invoke a persistent group. Previously wpa_supplicant entered group formation without triggering any specific events and it could confuse clients, especially when operating with a driver that does not support concurrency between P2P and infrastructure connection. Change-Id: I8a8773d60adb4c69dc723281737a378b9dc7dd6e Signed-off-by: Lior David <qca_liord@qca.qualcomm.com> Git-commit: 0ee89250982cd3d424952d88cdc2f5c52e500a81 Git-repo: git://w1.fi/srv/git/hostap.git CRs-Fixed: 985990
* wpa_supplicant: Expose wpas_get_bands() and related APILior David2016-04-151-0/+6
| | | | | | | | | | | | Expose the functions wpas_get_bands() and wpas_freq_to_band() and the enum wpa_radio_work_band, since they will be needed outside wpa_supplicant.c. Change-Id: I2bea4838f852395d9df0d1c2ad2db51060722f1e Signed-off-by: Lior David <qca_liord@qca.qualcomm.com> Git-commit: 2b6e9f91df7acf19998f967fcc6c5f4bb911d1d8 Git-repo: git://w1.fi/srv/git/hostap.git CRs-Fixed: 985990
* Add QCA vendor attribute and event to indicate subnet change statusRavi Joshi2016-04-011-0/+13
| | | | | | | | | | | | | | | | | | | | | | This allows offloaded roaming to inform user space of the change in IP subnet post roaming. The device may have roamed to a network which is in a different subnet which will result in IP connectivity loss. Indicating the change in subnet enables the user space to refresh the IP address or to perform IP subnet validation if unknown status is indicated. The driver indication is reported with a new event from wpa_supplicant in the following format: CTRL-EVENT-SUBNET-STATUS-UPDATE status=<0/1/2> where 0 = unknown 1 = IP subnet unchanged (can continue to use the old IP address) 2 = IP subnet changed (need to get a new IP address) Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Git-commit: f32227ed9ec95524d670f9936f5bf87d4e39fa2b Git-repo : git://w1.fi/srv/git/hostap.git CRs-Fixed: 997716 Change-Id: I90dad050da7c279b54bbc12e0866c438f9ccaa16
* Extend QCA roam event with subnet change indicationRavi Joshi2016-04-011-0/+1
| | | | | | | | | | | | | The new attribute can be used with QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_ROAM_AUTH to indicate whether the IP subnet was detected to have changed when processing offloaded roam/key management Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Git-commit: d381963385ef8a0aacf0675029a7fd107f2100f4 Git-repo: git://w1.fi/srv/git/hostap.git CRs-Fixed: 997716 Change-Id: Idf29237e9a7a674de543a091f5edc4216b3b5a0e
* Add QCA vendor definitions for simultaneous offchannelKanchanapally, Vidyullatha2016-04-011-0/+3
| | | | | | | | Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Git-commit: 94fb165c3ac317b93ddb9a96c620fcf87a2c68e2 Git-repo: git://w1.fi/srv/git/hostap.git Change-Id: I0a284ec156b742ee3aac6411ce2e93e7be85221a CRs-fixed: 909284
* Add QCA vendor definitions for vendor scan supportKanchanapally, Vidyullatha2016-04-011-0/+54
| | | | | | | | | | | Introduce definitions for QCA vendor specific subcommands and attributes to support vendor scan request. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Git-commit: b48567195d7eb4e1f6a18ae88a2af4db2afa193b Git-repo: git://w1.fi/srv/git/hostap.git Change-Id: Ia7f92909b4e09240f866fbb5aaf707943b65d627 CRs-Fixed: 909284
* Add parsing of preferred frequency list elementAhmad Kholaif2016-04-012-0/+17
| | | | | | | | | | | | This adds parsing of QCA vendor specific elements and as the first such element to be parsed, stores pointers to the preferred frequency list element that can be used to enhance P2P channel negotiation behavior. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Git-commit: 9baaac2d8495d56040a27063afe84f460525c2b3 Git-repo : git://w1.fi/srv/git/hostap.git Change-Id: Ie2da6d2dd9dc107f5ff3bb4763608fa5374c7539 CRs-fixed: 842468
* Fix generating offloaded ACS channel list when hw_mode is set to anyPeng Xu2016-04-011-0/+1
| | | | | | | | | | | | | When ACS is offloaded to device driver and the hw_mode parameter is set to any, the current_mode structure is NULL which fails the ACS command. Fix this by populating the ACS channel list with channels from all bands when current_mode is NULL. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Git-commit: d0cdccd30785b2471c632c341caef68ab1bc62db Git-repo : git://w1.fi/srv/git/hostap.git Change-Id: Ia8a5ef25184788f836daec2e009eb5bc64108e5d CRs-fixed: 842468
* Define new registry for QCA vendor specific elementsJouni Malinen2016-04-011-0/+30
| | | | | | | | | | | | | | The new enum qca_vendor_element_id registry is used to manage assignments of vendor specific elements using the QCA OUI 00:13:74. The initial assignment is for the purpose for extending P2P functionality for cases where the wpa_supplicant implementation is used by both ends of an exchange Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Git-commit: b43b2b520370b251ee3fdce3ade0f66950292281 Git-repo : git://w1.fi/srv/git/hostap.git Change-Id: Icd2cf14cbc5d1b781f12453ebcbf8ee147a3117e CRs-fixed: 842468
* Merge tag 'android-6.0.0_r26' into HEADDavid Ng2015-11-301-0/+51
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | Android 6.0.0 release 26 * tag 'android-6.0.0_r26': Update AP WPA/RSN IE on all associations if driver can select BSS Add QCA vendor command support to set band to driver nl80211: Use beacon TSF if it is newer than Probe Response TSF Conflicts: src/common/qca-vendor.h Change-Id: Ibab1bc3eda788f001e2a7a0a866c3a9af2a47dce
| * Add QCA vendor command support to set band to driverRavi Joshi2015-08-282-0/+67
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add vendor command to pass SET setband command to the driver and read the updated channel list from driver when this notification succeeds. This allows the driver to update its internal channel lists based on setband configuration. For merge compatibility it has 3 patches: 844dfeb Add QCA vendor command support to set band to driver 6b0ceee Add QCA vendor definitions for multi-port concurrency d71bdfb Add QCA vendor command for updating gateway parameters Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Dmitry Shmidt <dimitrysh@google.com> Bug: 23261230 Change-Id: I4ce6307c54b27d3d2f54d435fc0cae5480bdf23c
* | Android: Set ctrl_iface client socket group (AID_WIFI) separatelyAmarnath Hullur Subramanyam2015-10-081-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Split chown() call in wpa_ctrl_open() and wpa_ctrl_open2() to allow the group id to be set even if the process does not have privileges to change the owner. This is needed for modules that need to communicate with wpa_supplicant since without the group change, wpa_supplicant may not have privileges to send the response to a control interface command. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Git-commit: 10cac5b1a2549a3731e870c574bdd64df7d92877 Git-repo: git://w1.fi/srv/git/hostap.git Change-Id: Ic04d9996c51c514f1aa1bef6fd104a3e5c8d7668 CRs-Fixed: 913406
* | Allow wpa_cli/hostapd_cli client socket directory to be specifiedManikandan Mohan2015-10-062-4/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | This adds a new helper function wpa_ctrl_open2() that can be used instead of wpa_ctrl_open() to override the default client socket directory. Add optional -s<directory path> argument to hostapd_cli and wpa_cli to allow the client socket directory to be specified. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Git-commit: 4ae7120919b16b8994212cd2675364159eeac5c7 Git-repo : git://w1.fi/srv/git/hostap.git Change-Id: I07f81b365d4f02d4590f91baa5de9f493612a9da CRs-fixed: 908558
* | FST: Remove the IE header len/size macrosJouni Malinen2015-10-061-7/+4
| | | | | | | | | | | | | | | | | | | | | | These are confusing when the style used with the couple of FST IE checks differs from the rest of hostapd/wpa_supplicant implementation. Change-Id: I2171c0b72e09f3da1e7303da877688f51e012911 Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Git-commit: 9721b083f4836db1170d4e77cd0d982766d6e4b1 Git-repo: git://w1.fi/srv/git/hostap.git CRs-Fixed: 891455
* | FST: wpa_supplicant control interfaceAnton Nayshtut2015-10-061-0/+1
| | | | | | | | | | | | | | | | Change-Id: I25f1dc9ed566441850faff9f98b2117473c46e50 Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Git-commit: 3794af2dc18a75dbb7b258903a2faae7fe5e4406 Git-repo: git://w1.fi/srv/git/hostap.git CRs-Fixed: 891455
* | Parsing of multi band elementAnton Nayshtut2015-10-062-0/+88
| | | | | | | | | | | | | | | | Change-Id: I6abbbffa285f9806868b1526696479a0babd14b9 Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Git-commit: 659a1605d82706a197dd7693aa2785c0c1fc0b72 Git-repo: git://w1.fi/srv/git/hostap.git CRs-Fixed: 891455
* | FST: Add the Fast Session Transfer (FST) moduleAnton Nayshtut2015-10-061-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fast Session Transfer (FST) is the transfer of a session from a channel to another channel in a different frequency band. The term "session" refers to non-physical layer state information kept by a pair of stations (STAs) that communicate directly (i.e., excludes forwarding). The FST is implemented in accordance with IEEE Std 802.11ad-2012. Definitions * FST interface - an interface for which FST functionality is enabled * FST group - a bunch of FST interfaces representing single multi-band STA * FST peer - a multi-band capable STA connected * FST module - multi-band operation functionality implemented in accordance with IEEE Std 802.11ad-2012 (see 10.32 Multi-band operation) as a part of hostapd/wpa_supplicant * FST manager - an external application that implements custom FST related logic, using the FST module's interfaces accessible via CLI or D-Bus This commit introduces only the FST module. Integration of the FST module into the hostapd/wpa_supplicant and corresponding CLI/D-Bus interfaces and FST related tests are covered in separate commits. FST manager application is out of scope of these commits. As FST aggregates a few interfaces into FST group, the FST module uses global CLI for both commands and notifications. It also exposes alternative non-interface based D-Bus subtree for this purposes. Configuration and Initialization * FST functionality can enabled by compilation flag (CONFIG_FST) * hostapd/wpa_supplicant controlling multiple interfaces are used for FST * once enabled by compilation, the FST can be enabled for specific interfaces in the configuration files * FST interfaces are aggregated in FST groups (fst_group_id config file entry), where each FST group: - represents one multi-band device - should have two or more FST interfaces in it * priority (fst_priority config file entry) must be configured for each FST interface. FST interface with higher priority is the interface FST will always try to switch to. Thus, for example, for the maximal throughput, it should be the fastest FST interface in the FST setup. * default Link Loss Timeout (LLT) value can be configured for each FST interface (fst_llt config file entry). It represents LLT to be used by FST when this interface is active. * FST interfaces advertise the Multi-band capability by including the Multi-band element in the corresponding frames FST CLI commands: * fst list_groups - list FST groups configured. * fst list_ifaces - list FST interfaces which belong to specific group * fst iface_peers - list Multi-Band STAs connected to specific interface * fst list_sessions - list existing FST sessions * fst session_get - get FST session info * fst session_add - create FST session object * fst session_set - set FST session parameters (old_iface, new_iface, peer_addr, llt) * fst session_initiate - initiate FST setup * fst session_respond - respond to FST setup establishemnt attempt by counterpart * fst session_transfer - initiate FST switch * fst session_teardown - tear down FST Setup but leave the session object for reuse * fst session_remove - remove FST session object FST CLI notifications: * FST-EVENT-PEER - peer state changed (CONNECT/DISCONNECT) * FST-EVENT-SESSION - FST session level notification with following sub-events: - EVENT_FST_SESSION_STATE - FST session state changed - EVENT_FST_ESTABLISHED - previously initiated FST session became established - EVENT_FST_SETUP - new FST session object created due to FST session negotiation attempt by counterpart All the FST CLI commands and notifications are also implemented on D-Bus for wpa_supplicant. IEEE 802.11 standard compliance FST module implements FST setup statemachine in compliance with IEEE 802.11ad (P802.11-REVmc/D3.3), as it described in 10.32 Multi-band operation (see also Figure 10-34 - States of the FST setup protocol). Thus, for example, the FST module initiates FST switch automatically when FST setup becomes established with LLT=0 in accordance with 10.32.2.2 Transitioning between states. At the moment, FST module only supports non-transparent STA-based FST (see 10.32.1 General). Change-Id: Ifb8acd13818cd348022afeebf5aa644c4b9986fc Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Git-commit: 717333f4e4d027c69e7c1241dc124ef7d59a6c85 Git-repo: git://w1.fi/srv/git/hostap.git CRs-Fixed: 891455
* | Add IEEE 802.11ad element descriptionsAnton Nayshtut2015-10-061-0/+63
| | | | | | | | | | | | | | | | Change-Id: I884c00f402613d0d8f248c72437176466920921e Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Git-commit: 290078a734f231b8bf6d057834feb2c6dbc659a4 Git-repo: git://w1.fi/srv/git/hostap.git CRs-Fixed: 891455
* | QCA vendor command support to set band to driverSrinivas Dasari2015-10-062-0/+16
|/ | | | | | | | | | | | | | Add vendor command to pass SET setband command to the driver and read the updated channel list from driver when this notification succeeds. This allows the driver to update its internal channel lists based on setband configuration. Git-repo: git://w1.fi/srv/git/hostap.git Git-commit: 844dfeb804af7e6934b5d8e5ffbe2e813dabff54 Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Change-Id: I607c781020401e0d5014cb98523f6eb1adbf48b0
* Cumulative patch from commit 8c43ef8449bd4d2d0983db394770bd73f572b12dDmitry Shmidt2015-06-298-160/+327
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 8c43ef8 P2PS: Fix attribute addition in p2p_buf_add_service_instance() a9ea609 P2PS: Fix p2p_find last parameter handling 6c73149 AP: Increase maximum value accepted for cwmin/cwmax 575e4f5 SAE: Reject FFC commit-element with value p-1 a406244 P2PS: Do not reply to ProbeReq on another channel when starting Listen 0c2b3f6 SAE: Reject commit-scalar value 1 4f39908 Send CTRL-EVENT-NETWORK-NOT-FOUND if no suitable network was found 123df27 D-Bus: Fix typos in debug print ded14ce Android: Fix nl80211 build if BOARD_*_PRIVATE_LIB is unspecified a140721 Android: Rename ANDROID_P2P_STUB to ANDROID_LIB_STUB 2ba4de3 D-Bus: Add documentation for wpas_dbus_signal_peer_groups_changed() e48b5e2 D-Bus: Fix typo in dbus signal function documentation 09d5048 D-Bus: Add function documentation for wpas_dbus_unregister_interface() adfbbd2 D-Bus: Add function documentation for wpas_dbus_register_interface() c5967f0 D-Bus: Fix wpas_dbus_signal_p2p_invitation_result() documentation 4457f41 radius: Fix NULL dereference issue on allocation failure f826fb1 OpenSSL: Handle EC_POINT_is_on_curve() error case bbb5008 SAE: Use random "password" in extra hunting-and-pecking loops eb5fee0 SAE: Add side-channel protection to PWE derivation with ECC 16841ab crypto: Add functions for computing the Legendre symbol and EC y^2 c4a13b4 OpenSSL: Add support for Brainpool Elliptic Curves 4584b66 SAE: Increase security parameter k to 40 based on Dragonfly recommendation fdd731b SAE: Fix PWE generation to use minimum loop count (k) properly 8ec3332 SAE: Merge sae_derive_commit() error case return statements d93abd4 SAE: Merge sae_get_rand() error case return statements 6a58444 SAE: Verify that own/peer commit-scalar and COMMIT-ELEMENT are different 4e7e688 Add crypto_ec_point_cmp() 8e2a3a4 dbus: Do not initialize variable twice c1a14ef Do not check unsigned size is less than zero fdc5608 OpenSSL: Remove SSL_CTX_{get,set}_app_data() compatibility wrapper ba54933 libtommath: Fix mp_init_multi() stdarg use on error path f6332b0 wpa_gui: Initialize WpaGuiApp::w in the constructor f6df3f3 Use os_* wrapper more consistently 91b7a5e Use unsigned/signed printf format more consistently 59bae74 HS 2.0R2: Fix memory leak on error path in hs20-osu-client c5ca73d P2P: Use offsetof() instead of local implementation c3c5b5f ERP server: Make erp_send_finish_reauth() easier for static analyzers 6ce1bea bsd: Remove redundant NULL check in bsd_init() c99df20 Remove redundant NULL check in ieee802_1x_encapsulate_radius() 2eb5967 AP: Add more 2.4 GHz channels for 20/40 MHz HT co-ex scan 5ed6519 hw_features: Merge similar return cases 4e37dd6 SAE: Simplify sae_prepare_commit() error path 04e6c4c Fix SAE group selection in an error case 3dce85c HS 2.0: Add WLAN RADIUS attributes in OSEN case efd5d26 Remove unnecessary wpa_ie_len check from wpa_parse_wpa_ie_wpa() ce8963f Remove WEP40/WEP104 cipher suite support for WPA/WPA2 ee140ef FT: Stop association attempt if Auth response processing fails (SME) 1887be4 Make check_20mhz_bss() static Signed-off-by: Dmitry Shmidt <dimitrysh@google.com> Bug: 22062116 Change-Id: Ie1d175f1faab24bf39ce81ead7a078e1e236badd
* Cumulative patch from commit f43c1ae7989c38fe15756f12a9196a1cf798b4d7Dmitry Shmidt2015-06-232-3/+45
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | f43c1ae P2P: Handle P2P Device dedicated interface parent removal 1ac977b nl8021: Allow sending wowlan configuration on any interface 4899702 nl80211: Remove android_genl_ctrl_resolve() 38dcc86 P2P: Consider ht/vht on P2P_GROUP_ADD command (with no params) 29292d5 ctrl_iface: Make p2p_ctrl_group_add() more robust e4a80d8 P2P: Fix secondary channel selection for HT40 4e71758 dbus: Add RemoveClient method to remove a client from local GO f0a79c9 D-Bus: Fix wpas_dbus_register_peer() documentation 95d62a6 D-Bus: Add missing params in WPS function documentation 790429b D-Bus: Fix function documentation for wpas_dbus_signal_p2p_go_neg_resp() 92fe746 D-Bus: Add function documentation for wpas_dbus_signal_p2p_go_neg_req() e1dffa3 P2P: Fix PBC overlap detection de7b02f P2P: Use the P2P Device interface in wpas_p2p_fallback_to_go_neg() 6b5147a P2P: Fix memory leak in p2p_process_nfc_connection_handover() 33ba27d EAP-FAST peer: Stop immediately on key derivation failure 144b6a0 OpenSSL: Fix memory leak on an openssl_tls_prf() error path 50a9efe P2PS: Fix Probe Response frame building in error cases 509f269 P2PS: Fix org.wi-fi.wfds matching when building the response 5fa5f84 P2PS: Add more debug prints for service info building fdde3db P2PS: Remove unnecessary service hash filtering from p2p_reply_probe() f2e0eec P2PS: Do not ignore other hashes if org.wi-fi.wfds hash is included ebdc32f P2PS: Fix service hash matching for org.wi-fi.wfds 24533f7 P2PS: Fix p2p_find handling to allow "wildcard" with other hash values f33a31b P2PS: Verify service name length in P2P_FIND command 129b621 P2PS: Fix P2P_FIND seek parameter parsing 83e520e P2PS: Add a wildcard with other advertised service info c5d3cad P2PS: Re-factor p2p_buf_add_service_instance function 13f6f61 wpa_cli: Fix process termination in wpa_cli action mode case b4c0f58 Clear allocated debug message buffers explicitly 14fd033 Clear control interface command explicitly from stack d95c599 P2P: Fix group interface addition failure properly for concurrent case e12c400 P2PS: Refactor p2p_data::query_hash and p2p_data::query_count use 4839da4 P2P: Add vendor elements into Invitation Response frames 886f583 P2PS: Delete p2ps_svc_found from struct p2p_data 3f048aa P2PS: Add a function to free a PD context 8f52409 P2P: Prefer direct Probe Response frames over GO's client list 4e8817f P2P: Use more precise device timestamping for group clients 0799b3f P2P: Specify frequency when sending Probe Response frame 5d180a7 drivers: Add freq parameter to send_mlme() function 5143e7e P2P: Fix return value of p2p_reply_probe() and p2p_probe_req_rx() 07c1e98 P2PS: Enable Probe Request frame processing by P2P Client 734ddf6 P2P: Add rx_freq parameter to Probe Request frame handler e6012e8 P2P: Update target GO Device Address from BSS entry during join a9a4841 Remove duplicated country code from operating class lists 132dfbe Fix removal of tagged interface and bridge when multiple BSS share them e11776a Combine multiple function calls to a single statement b649c0a dbus: Add Reconnect command to D-Bus Interface f4a234a doc: Update D-Bus GONegotiationRequest Signal: add device_go_intent 0c9fb14 P2P: Add Operating class 125 for P2P supported channels Change-Id: I782c1403985248ff994f484282efa6519fd369e9 Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
* Cumulative patch from commit dc1a341dec54c28c3351ee7edab9ccaf7b68861fDmitry Shmidt2015-05-292-0/+5
| | | | | | | | | | | | | | | | | dc1a341 P2P: Add manufacturer info into D-Bus peer interface 3330395 P2P: Add P2P Cancel method over D-Bus interface 87d3c62 WPS: Add WPS Cancel method over D-Bus interface eda9d84 P2P: Fix a potential memory leak in a P2P+NFC corner case 701d972 Add libwpa_client build option to use a dynamic library ccad05a P2P: Restart group formation timer upon receiving new Inv Req 4d3be9c Postpone updating of wpa_s->current_bss till association event 3784c05 Extend hw_mode to support any band for offloaded ACS case 1b748e6 HS 2.0: hs20-client: Fix hostname extraction from URL dba68f2 HS 2.0: Fix hs20_spp_server compile error e4a43a9 HS 2.0: spp-client: Warn user if xml file cannot be found Change-Id: If4acdda6f6e6a07bf87216d34b2c89486a4a3078 Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
* Cumulative patch from commit 9b05135aa477f2c64d08bdb99062907cf767c1eaDmitry Shmidt2015-05-191-0/+1
| | | | | | | | | | 9b05135 P2P: Fix association with an AP/P2P GO that is not a P2P manager 8884ce0 hostapd: check validity of cwMin/cwMax values 9649b53 vlan: Print libnl error message on vlan_add / vlan_del 279724d Add QCA vendor subcmd for Link Property Query Change-Id: I33606ae68e16c8eb07473add034c7bca5aa6e153 Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
* Cumulative patch from commit 01a025937c67f0eca6021d94b8ec3b144f8b1730Dmitry Shmidt2015-04-281-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | 01a0259 WPS: Add support for 60 GHz band 0ef1e29 WPS: Fix shorter authentication timeout during no-SelReg iteration 3465176 nl80211: Verify that cipher suite conversion succeeds a250722 Try to set PMK only with key mgmt offload support in the driver 4a7ce98 Make IPv6 NA multicast-to-unicast conversion configurable 9f390f4 Interworking: Fix network selection warning without SIM/USIM support a0ad9e8 Remove WPA per-VLAN groups when no more stations remain 87b5b53 Make VLAN ID available in STA info over control interface 5678a2d P2P: Allow wpa_supplicant to start if social channels are not supported 209214b vlan: Move CONFIG_FULL_DYNAMIC_VLAN includes to proper places a6da824 Do not use C++ reserved words as variable names eaa3728 wpa_gui: Themed icon loader 9a3cb41 Fix wpa_priv (CONFIG_PRIVSEP=y) build 8b423ed Declare all read only data structures as const fd4fb28 OpenSSL: Try to ensure we don't throw away the PIN unnecessarily fabc6dd mesh: Retransmit the last Commit Message in the Committed state 068669f vlan: Verify RADIUS returned VLAN-ID and dynamic_vlan=required 5add410 WPS: Use shorter authentication timeout during no-SelReg iteration e7d2034 WPS: Enforce five second minimum time before AP iteration bd143cc Remove trailing whitespace from Makefile 74802c0 P2P: Do not create a P2P Device interface if P2P is disabled 579674e Document p2p_disabled option in wpa_supplicant.conf 8ea8a89 nl80211: Extend unique MAC address assignment for station iftype Change-Id: I8bc8a63f37c0892b83376b9d5a5859827ae50554 Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
* Cumulative security patch from commit ca68a8b561c48393c8ba25055ce294caaa3ac008Dmitry Shmidt2015-04-239-33/+75
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ca68a8b WPS: Explicitly reject Public Key attribute with unexpected length 6b94f71 WPS: Truncate variable length string attributes to maximum length f4b64c6 Simplify VHT Operation element parsing d6fefd6 Simplify HT Operation element parsing 40baac0 Simplify VHT Capabilities element parsing baae4cb Simplify HT Capabilities element parsing b39a059 Simplify Timeout Interval element parsing e8997b9 Simplify ERP element parsing f87c99c Simplify DSSS Parameter Set element parsing ae7a42b FT: Check FT, MD, and Timeout Interval length in the parser c9bf7b6 Fix a memory leak on mesh_attr_text() error path 2531036 FT: Fix WMM TSPEC validation in driver-based AP MLME case 632931c P2P: Use WPS_SEC_DEV_TYPE_MAX_LEN in P2P array definition 0f5acfb Use common is_ctrl_char() helper function 5a041ac WPS: Ignore too long SSID attribute d6c3067 Replace SSID_LEN with SSID_MAX_LEN eaa8eef Replace MAX_SSID_LEN with SSID_MAX_LEN 81847c2 Replace HOSTAPD_MAX_SSID_LEN with SSID_MAX_LEN 6fb761c Replace WPA_MAX_SSID_LEN with SSID_MAX_LEN d9d1b95 Use SSID_MAX_LEN define instead of value 32 when comparing SSID length 65b1025 WPS: Ignore too long Device Name attribute cc6f243 Add WPS_DEV_NAME_MAX_LEN define and use it when comparing length dd3d857 P2PS: Check for maximum SSID length in Persistent Group Info 05e46a9 Ignore too long SSID element value in parser 90758f0 Mark QCA vendor command id 53 reserved, but not used anymore f41ded6 Remove unused leftover from multi-SSID design cb71a83 OpenSSL: Clean up TLS PRF implementation 7f90a23 Add QCA vendor subcmd for OCB 897418a eap_example: Fix configuration by added DH parameters Change-Id: If688231edfce41163ef0c1f0ad75291a9bdfbe81 Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
* Cumulative patch from commit 1acf38f1a5aa19169035de9b611fc76440729c0bDmitry Shmidt2015-04-151-19/+19
| | | | | | | | | | | | | | | | | | | 1acf38f Add ifname to vlan_remove_dynamic() debug print 2e192bd Print debug entry on STA pruning from other interfaces c8e6bea Remove VLAN interface on STA free de31fb0 vlan: Ignore multiple NEWLINK messages 371205d vlan: Ignore DELLINK on interfaces that exists a5e81ba Fix STA VLAN bind for RSN pre-authentication case 3ffdeb7 Fix RSN preauthentication with dynamic_vlan enabled but unused 8e2c5f1 dbus: Fix WPS property of fi.w1.wpa_supplicant1.BSS interface d447cd5 Updates for stricter automatic memcpy bounds checking 60eb9e1 AP: Enable multicast snooping on bridge if ProxyARP IPv6 is in use b799118 Fix CONFIG_AP=y build without CONFIG_CTRL_IFACE 954f03a Fix compilation issues with CONFIG_NO_CONFIG_WRITE=y da3db68 Fix INTERFACE_ADD parsing Change-Id: If25ebad847bc2a1b5d9386cbaa80c6fd8ce4e226 Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
* Cumulative patch from commit 681278246232029c334117bd6dc7e74c6b179f96Dmitry Shmidt2015-04-031-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | 6812782 hlr_auc_gw: Allow Milenage RES length to be reduced 4839f7c wpa_cli: Fix a typo in usage text a20a361 wpa_supplicant: Clear blacklist on connect 0144ecb Android: wpa_ctrl missing include for sys/stat.h 0bb20ef HS 2.0R2: Allow user to specify spp.xsd file location 97c9991 HS 2.0R2: Add more debugging messages to hs20-osu-client 93c2e60 HS 2.0R2 CA: Improve setup.sh and .conf for more flexibility 02e122a Reschedule scan from wpas_stop_pno if it was postponed 80fd9c3 EAP-PEAP server: Add support for negotiating vendor for Phase 2 a867082 EAP peer: Use 32-bit EAP method type for Phase 2 processing 56dfc49 Fix a typo in configuration parameter documentation c4b45c6 TLS: Fix memory leaks on tls_connection_set_params() error paths af85191 Make tls_connection_get_keyblock_size() internal to tls_*.c 94f1fe6 Remove master key extraction from tls_connection_get_keys() fa0e715 Use tls_connection_prf() for all EAP TLS-based key derivation df8191d Rename HT 20/40 coex variable to be more descriptive 1d0f42a EAP server: Add debug prints to help asleap testing 2c1cf90 Add wpa_snprintf_hex_sep() 5955cfa ms_funcs: Make challenge_hash() non-static Change-Id: I0f3e5e5170a61e458949a675641946d95598dc5d Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
* Cumulative patch from commit 989e784601887734e696b3fac0ad6d101badd7eaDmitry Shmidt2015-03-302-11/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 989e784 P2P: Optimize scan frequencies list when re-joining a persistent group 154a1d5 hostapd: Fix some compilation errors ce18c10 Add support for CONFIG_NO_ROAMING to Makefile 65a7b21 OpenSSL: Implement AES-128 CBC using EVP API 22ba05c Explicitly clear temporary stack buffers in tls_prf_sha1_md5() 940a4db Explicitly clear temporary stack buffer in sha1_t_prf() eccca10 Explicitly clear temporary stack buffer in hmac_sha256_kdf() e8e365d wext: Add support for renamed Host AP driver ifname fc48d33 Improve error messages related to EAP DB c469d62 Error out if user configures SQLite DB without CONFIG_SQLITE 270427e HS 2.0R2: Add more logging for hs20-osu-client icon matching 8e31cd2 OSU server: Improve logging for SPP schema validation failures 23dd15a http-curl: Improve log messages e7d285c OSU server: Print out signup ID if there is some problem with it 1b45006 HS 2.0R2: Remove unused argument identifier from hs20-osu-client 2e7a228 HS 2.0R2: Allow custom libcurl linkage for hs20-osu-client a52410c Allow PSK/passphrase to be set only when needed 3e808b8 EAP-pwd peer: Add support for hashed password e4840b3 EAP-pwd server: Add support for hashed password 2bd2ed2 EAP-pwd: Mark helper function arguments const when appropriate 9ccc10f wpa_cli: Use tab as only word separator for networks 5a997b2 wpa_cli: Completion routine for dup_network command 1ca6c0f wpa_cli: Completion for remove, select, disable, enable network 7e6cc90 wpa_cli: Implement completion routine for get_network/set_network 32a097f wpa_cli: Keep track of available networks 94dc0e9 wpa_cli: Allow tab as alternative separator for cli_txt_list words efa232f Add support for virtual interface creation/deletion ba87329 wpa_cli: Use .wpa_cli_history under Android 0f8385e Show OSEN key management properly in scan results e7b4cd0 wpa_gui: Add tray icon based signal strength meter 54d3dc9 AP: Unset HT capabilities for an HT association request without WMM Change-Id: I71425b8e20fe1dfdb777592257dc4e4063da8d85 Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
* Cumulative patch from commit c41d0840a1ae4d755c525b091a4bf9d740efdb5fDmitry Shmidt2015-03-243-15/+48
| | | | | | | | | | | | | | | | | | | | | | | | | | | | c41d084 nl80211: Allow driver-based roam to change ESS 6ba7eba Add OpenSSL 0.9.8zf patch for EAP-FAST support 1de0710 atheros: Clear WPS appie during deinit 857d942 Extend offloaded ACS QCA vendor command to support VHT 0fd52a6 Remove duplicated wpa_s->conf->interworking check ad44309 Add Extended Capabilities element to all Probe Request frames 9bd566a Delay AP selection if all networks are temporarily disabled 701f396 Don't optimize scan frequencies if selected network has changed e9d2805 P2PS: Extend p2p_service_del asp to support 'all' parameter 6dd51ec P2PS: Add P2PS advertisements on ALL_SERVICES ANQP query c40a891 P2PS: Delete ASP advertisements on wpas_p2p_service_flush 2dc422e P2PS: Update SD indicator value on ASP add/del/update 030a3e1 DFS: Fix range availability check 56ef992 DFS: Consider non-contiguous channels 6ceea4c Restart sched_scan on channel list change e7a296b Remove unused shared_freq driver op 58e115b Fix hlr_auc_gw build with OpenSSL 5f9c92f nl80211: Fix vendor command handling 55e8f0e Fix CONFIG_EAP_UNAUTH_TLS without CONFIG_EAP_TLS build 9772af6 Interworking: Prevent scan during ANQP fetch and Interworking select 2c50246 Add a AP mode event message for possible PSK/passphrase mismatch 6784168 Remove SChannel support Change-Id: I21078309f83821d4b685de77c517c0886b3366bd Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
* Cumulative patch from commit 0b08f25445caacb502c394e917a292d7fa595447Dmitry Shmidt2015-03-173-35/+47
| | | | | | | | | | | | | | | | | | | | | | 0b08f25 wpa_gui: Documentation update 6128a90 hostapd: Add channel 140 to allowed HT40 channel pairs 8ffaafa wpa_cli: Add missing parameters for "set" command completion routine 0fd9d95 wpa_cli: Add completion routine for "get" command 5c6c315 Add IPv4 support function for "get" control interface command 74fa78b Add AVG_BEACON_RSSI to SIGNAL_POLL output 4acdc48 nl80211: Handle NL80211_ATTR_EXT_FEATURES attribute a0563ac Sync with mac80211-next.git include/uapi/linux/nl80211.h 0f89328 P2P: Move upper layer SD interaction into a separate file 8b94980 FT: Avoid unnecessary allocation for MIC calculation 18da814 The master branch is now used for v2.5 development bc04db9 Change version information for the 2.4 release bc1d23a Add ChangeLog entries for v2.4 319d9da Fix bitfield_get_first_zero() to not read beyond buffer 39c3bfc Indicate AP-DISABLED on main AP mode deinit path f10487e Send CTRL-EVENT-DISCONNECTED on wpa_supplicant AP deinit Change-Id: I0b8459261265a25fe0edd7b435ede32be3cc6616 Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
* Cumulative patch from commit 00033a0903f69b2f0e0c048840bff059f5a3eab9Dmitry Shmidt2015-03-101-0/+23
| | | | | | | | | | | | | | | | | 00033a0 OpenSSL: Always accept pinned certificates b2329e4 Add QCA vendor subcmd for Data Offload 1d246a1 Make rate-not-supported debug print more useful 761396e Reject Group Key message 1/2 prior to completion of 4-way handshake 3f0e6ec nl80211: Extend NL80211_CMD_TDLS_OPER to support discovery c10ca2a TDLS: Allow driver to request TDLS Discovery Request initiation 41312fc mesh: Leave mesh in driver setup if initialization fails ac8e074 Clear RSN timers for preauth and PTK rekeying on disassociation f2f65dd Reserve QCA vendor specific nl80211 commands 61..90 088a210 HS 2.0: Add NULL check before dereferencing in hs20-osu-client bea8d9a nl80211: Use the new bridge port option proxyarp_wifi Change-Id: I1ef819ab4efa554f059787e02570f48be39819a6 Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
* Cumulative patch from commit 6e9023ea499ea9a89b0e858c85e32b455d57264cDmitry Shmidt2015-03-102-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 6e9023e DFS: Allow wpa_supplicant AP mode to use non-offloaded DFS 02e42ab nl80211: Add vendor event parsing for DFS offload events bd0f68c DFS: wpa_supplicant event processing d7f1aa8 DFS offload: P2P changes for autonomous GO 1e2aaff DFS offload: Indicate AP-CSA-FINISHED for DFS offloaded case c13578c DFS offload: Add main DFS handler for offloaded case 5de81d7 DFS offload: Skip user space processing for CAC operations 192ad3d Interworking: Clear SCANNING state if no match found 95d7b86 P2P: Consider 5 GHz channels also for auto GO a51c40a P2P: Fix regression in start-GO/AP through a "fake" scan dd5c155 eap_proxy: Callback to notify any updates from eap_proxy 9a05d98 atheros: Add a new flag for OSEN support 9feadba Remove unnecessary NULL check to make function more consistent 1772d34 P2P: Fix interface deinit for failed group interface initialization 3f9ebc4 P2P: Allow AP/GO interface to be started while P2P-in-progress b4a9292 RADIUS client: Fix server failover on return-to-primary on error case 9836cb5 Add option to force a specific RADIUS client address to be used 1a7ed38 RADIUS client: Fix a copy-paste error in accounting server failover de7c06e P2P: Continue find in GO-Neg-Resp-fail status corner cases c280590 Do not add blacklist entries based on normal disconnect request cases bdf0518 P2P: Direct P2P_CONNECT command to proper interface 44b9ea5 P2P: Do not allow scan or normal association on cfg80211 P2P Device 9542f21 Clean up p2p_find command parsing and execution fa9f381 P2P: Allow a specific channel to be specified in P2P_FIND eb78a8d P2P: Restore P2P_SCAN_SPECIFIC d988ff7 hostapd: Disable VHT caps for STAs when no valid VHT MCS found 70fd828 RADIUS client: Fix previous failover change c3dabf5 Fix merge issue with IBSS VHT support 8b2b718 Fix minor issue in HT40 max rate determination 347c55e RADIUS client: Re-try connection if socket is closed on retransmit 94b39e5 RADIUS client: Fix server connection recovery after initial failure bbee36e Allow RADIUS server address to be replaced efb4008 TLS: Remove placeholders for SIGN_ALG_DSA support Change-Id: I8e5d0dfd5fddb6de2f8d8211b708c3bb6674098b Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
* Cumulative patch from commit f51f54a007e0de1d413dee3523472d3bbeed2eccDmitry Shmidt2015-03-104-1/+122
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | f51f54a nl80211: Resubscribe to nl80211 events on global nl_event socket 48ec694 Fix Linux packet socket workaround to not close the socket too easily 0d2030e Use estimated throughput to improve roaming selection 1d747e2 Add snr and est_throughput to the BSS entries a1b790e Select AP based on estimated maximum throughput ab647ff Add wpa_supplicant Makefile target libwpa_ctrl.a abae2d1 trace: Initialize alloc_list even without os_program_init() call 891dfb3 Add helper function to clear and free wpa_psk list 71d77ad Update current BSS level when signal change event occurs f1609f1 wpa_supplicant: Cancel sched_scan when stopping countermeasures abb8d08 nl80211: Add support for configuring P2P GO CTWindow 0b8bcaa P2P: Allow configuring CTWindow when working as GO c77ffc6 TDLS: Ignore extra padding in all packets 5ce6ac1 Inteworking: Add support to update the ANQP Capability List into the BSS 185ada4 HS 2.0: Add support to update the HS20 Capability List into the BSS 7fe7a3a wpa_gui: Debug enhancement 2b892d4 Add forgotten network profile parameters to config file writing 563ee18 IBSS: Add support for VHT80 configuration ada157f Make hostapd_set_freq_params() common 98479dc IBSS: Update operating frequency if joining an existing IBSS 4d9e6fb IBSS: Add fixed_freq network parameter 6f5e1b0 Use priority list instead of global for PNO 97fc2dc Allow libnl-3.0 include path be specified f92446f P2PS: Add P2PS interface info 59b416c Add optional reassoc-to-same-BSS optimization c4da67d Fix passive_scan config parameter writing 715d5c4 hs20-osu-client: Ensure NULL checks are done before dereferencing 58d405f Fix OCSP debug messages 710dfb4 OpenSSL: Fix OCSP error path bd7bb43 HTTP: Fix OCSP error path 946572c Android: Remove commented out non-Android build parameters 15ada7f Android: Remove libxml2 config defines ebe8d3f Android: Silence unused function parameter warnings dbd10da Android: Fix hs20-osu-client build on Android 5.0 a926295 HS 2.0R2: Fix permissions for SP/<fqdn> directory on Android 480994d nl80211: Allocate QCA vendor subcmds for DFS radar detected and CAC events c165cb4 Drop all hostapd STA entries on interface disabled event 106fa1e nl80211: Indicate interface-down event only for the main netdev eeb1cb2 VLAN: Clean up RTM_NEW/DELLINK processing 47e5fbd hostapd: Avoid sending client probe on removed client 3478273 Re-configure WPA2 group keys on hostapd interface re-enable f33c860 Re-enable beaconing on interface disable+enable fc99fab nl80211: Print a debug log entry on NL80211_CMD_PROBE_CLIENT failures 0d2f324 P2P: Fix send_action_in_progress clearing in corner cases 9ff8dda Add hostapd UPDATE_BEACON ctrl_iface command e0761c5 nl80211: Allocate QCA vendor subcmd for DFS CAC Start event 1db718b nl80211: Test vendor command and event 10263dc Add control interface commands for fetching wpa_config values f91a512 Add INTERWORKING_ADD_NETWORK command c612ae9 AP: Do not reply to Probe Request frames with DS Params mismatch 5b74e08 P2P: Document P2P_CONNECT-auto 99650ca Add STOP_AP control interface command 6b00512 P2P: Add event messages for P2P_CONNECT-fallback-to-GO-Neg b0e669b P2P: Fix P2P_CONNECT-auto fallback to GO Neg with group interface bf51f4f mesh: Fix remaining BLOCKED state after SAE auth failure 79ddb20 mesh: Add a monitor event on SAE authentication getting blocked dd2cbaf mesh: Add a monitor event for SAE authentication failure 0cb5f8d mesh: Fix inactivity timer for 32 bit system 11e2ddb mesh: Remove duplicated no_auto_peer update 1e52983 D-Bus: Fix network block type change 4fada12 Fix HT40 co-ex scanning issue on hostapd error path 23ed011 Fix Linux packat socket regression work around 663ae2f Don't write to wpa_supplicant.conf directly d9a9bc0 IBSS: Do not enable HT with WEP or TKIP 0d7eb43 ACS: Accept channel if any (rather than all) survey results are valid 68fa00c ACS: Allow specific channels to be preferred 6f41a25 ACS: Use weighted average for 2.4 GHz adjacent channel interference Change-Id: Ie1cabd28dcfdefafa02e81477e34badae6f7e629 Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
* Cumulative patch from commit 2c0efd9e49b15da163cee659409eee85390620c3Dmitry Shmidt2015-02-062-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 2c0efd9 P2P: Fix stopping on search after SD callback db3168d OpenSSL: Use SSL_cache_hit() when available 68ae477 OpenSSL: Use library wrapper functions to access cert store abe96d0 P2P: Clean up Listen channel optimization debug prints d2ca6ba Fix hostapd obss_interval documentation d027c7b Fix 20/40 MHz co-ex report processing with obss_interval=0 93eca61 P2PS: Do not remove pending interface on p2p_stop_find ae2dd83 P2PS: Allow PD retry in SEARCH and LISTEN_ONLY also 87d5ef5 P2PS: Add commands to control interface redir list 0cf12b3 P2PS: Send P2P_FIND_STOPPED event during P2P SD also 306aaf4 P2PS: Start WPS registrar upon GO formation 9e96e46 P2PS: PD Response processing ab8ee77 P2PS: Provision Discovery fail event 1300cc8 P2PS: PD Request processing and PD Response building 5fefce2 P2PS: Callback to send P2PS provisioning events 9a58e52 P2PS: Callback to create pending group after sending PD Response 895d94d P2PS: Callback to remove stale persistent groups f309c18 P2PS: ASP provisioning commands to control interface 6d90851 P2PS: Process P2PS provisioning commands 369678a P2PS: Add P2PS attributes into PD Request if requested 59fec34 P2PS: Allow p2p_build_ssid() to use pre-set SSID d4b43b5 P2PS: Add support to send ASP-RESP events 6df08d0 P2PS: Logic to parse GAS requests for ASP services 5a4102c P2PS: Add support to send ASP service requests 095b3c4 P2PS: Add Application Service Info to device found events 4660e73 P2PS: Add Advertised Service Info into Probe Response frames 9e7321e P2PS: Parse Probe Request frames for matching ASP hashes ae9d45f P2PS: Extend add/del services logic to support ASP ea8e033 P2P: Allow p2p_get_group_num_members() to be called with NULL 4f88fc0 P2PS: WPS changes needed for P2PS default PIN 1a94b0a P2PS: Add service hash to Probe Request frames 5177509 P2PS: Add option to specify seek strings into P2P_FIND 5f18501 P2PS: Helper functions to build new P2P attributes 60d1148 P2PS: Add parsing of new P2P attributes b9348be P2PS: Add new P2P identifier assignments from P2P spec v1.5 c3d6c71 Add helper functions for escaping and unescaping UTF-8 66eaf8a Fix driver-offloaded offchannel TX done processing c5e154c P2P: Add P2P state into p2p_send_action_cb() debug entry f2dc06e P2P: Ignore remain-on-channel callback event if not waiting for one 6a6569b HS 2.0R2: Add password to DB in case of machine managed subscription f0d0a5d Improve BSS selection with default noise floor values 7f7bfba Add an option allow canned EAP-Success for wired IEEE 802.1X 49fcc32 EAP-MSCHAPv2 peer: Add option to disable password retry query 66bc683 hostapd: Simplify vlan_add_dynamic error paths 99805a0 Interworking: Convert wpa_printf() to wpa_msg() b42f539 Add a variable to handle extra CFLAGS values e6dd819 Work around Linux packet socket regression 7650f9e Fix resource leaks on rsn_preauth_init() error paths a565e03 dhcp_snoop: Make IPv4 addresses human readable in debug log 2dd4f3a Fix STA re-bind to another VLAN on reauthentication 4437f8f Free old eap_user_file data on configuration change 1180dd6 WPA auth: Disconnect STA if MSK cannot be fetched 40aaa64 WPA auth: Clear temporary MSK storage from stack explicitly 01b481a Convert couple of remaining printf to wpa_printf in ap_list bfaefd5 EAP-PEAP server: Fix Phase 2 TLV length in error case 745d936 mesh: Create new station entry on popen frames 41bff86 mesh: Always free the station if peering failed 871ff0b mesh: Sync plink state with kernel ba42261 Simplify eapol_sm_notify_pmkid_attempt() 993a865 Add eap_session_id to wpa_supplicant STATUS output f19c907 OpenSSL: Implement aes_wrap() and aes_unwrap() fee31f7 OpenSSL: Remove support for versions older than 0.9.8 8bf3030 OpenSSL: Use a common helper function for HMAC 983c6a6 OpenSSL: Replace internal HMAC-MD5 implementation Change-Id: I5743003f14efae324537f7dc2c5e6ada892a33a7 Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
* Cumulative patch from commit 3f56a2b7460a57a2b68b48b936be134bf04aa36d (DO ↵Dmitry Shmidt2015-01-284-55/+210
| | | | | | | | | | | | | | | | | | | | | | | | | | NOT MERGE) 3f56a2b Ignore pmf=1 default if driver does not support PMF fa38860 nl80211: Fix build with libnl 1.1 937403b Update copyright notices for the new year 2015 399e613 Add Suite B AKMs to key_mgmt capability list 5e3b519 Add Suite B 192-bit AKM 97ae35a Add HMAC-SHA384 98cd3d1 Preparations for variable length KCK and KEK 30bff1d Extend AES-CMAC routines to support 256-bit keys 86f9b1c nl80211: Fix default group key management index configuration b5f045d Show supported group_mgmt capabilities 893e152 Interworking: More debug messages f45bae5 Interworking: Add logging to track nai_realm_find_eap failures 5a5aab7 Interworking: Remove unnecessary NULL check 400de9b hostapd: Debug messages for dodgy RADIUS servers ad905e4 wpa_gui: Sort frequency and signal numerically in the scan results dialog c35e35e Add passive_scan configuration parameter bff162a P2P: Fix NULL pointer dereference with SD query cancellation 630b323 nl80211: Increase netlink receive buffer size Change-Id: I32d4bd934ad76e24c646e9925bb839b1ba2a148e Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
* Cumulative patch from commit fb09ed338919db09f3990196171fa73b37e7a17f (DO ↵Dmitry Shmidt2015-01-214-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | NOT MERGE) fb09ed3 Interworking: Notify the ANQP parsing status d10b01d HS20: Provide appropriate permission to the OSU related files 73f1ee0 HS20: Fix TrustRoot path for PolicyUpdate node in PPS MO 54a0ac0 HS20: Return result of cmd_sub_rem in hs20-osu-client b62b0cb WNM: Fix possible memory leak by free buf 9bd0273 EAP: Fix possible memory leak in eap_ttls_process_decrypted() b760e64 eap_server: Avoid NULL pointer dereference in eap_fast_encrypt_phase2() 948d3a8 hostapd: Remove unused variable from hostapd_get_hw_features dd09e42 Fix memory leak in wpa_supplicant global bgscan configuration 30f459c wpa_cli: Fix NULL dereference on printf string argument 414f23d Avoid NULL string in printf on EAP method names in authenticator b72b2ad P2P: Stop p2p_listen/find on wpas_p2p_invite 7b7b444 nl80211: Fix reading of the extended capabilities mask 7e608d1 P2P: Use the correct wpa_s interface to handle P2P state flush fd83335 AP: Enable HT Tx STBC for AP/GO if supported by driver d90bfa9 Move external_scan_running to wpa_radio 0c5f01f Clear reattach flag in fast associate flow 8ad8bc5 NFC: Redirect NFC commands on global control interface 57ae1f5 P2P: Fix P2P invitation with NFC 07565ab WNM: Fix the length of WNM_BSS_QUERY control interface command 2d9c99e Retry scan-for-connect if driver trigger fails 911942e Add a test framework for various wpa_supplicant failure cases 6b46bfa WPS: Re-fix an interoperability issue with mixed mode and AP Settings 1648cc6 ACS: Allow subset of channels to be configured 95ff306 nl80211: Allow HT/VHT to be disabled for IBSS 7451a21 mesh: Return negative value on join failed 5a2a6de mesh: Make inactivity timer configurable b9749ba AP: Expire STA without entry in kernel a114c72 AP: Remove redundant condition for STA expiration 0d787f0 Fix RADIUS client with out-of-memory and missing shared secret 0efcad2 Print in debug log whether attached monitor is for global interface 8266e6c HS 2.0: Try to use same BSS entry for storing GAS results 6c69991 Make wpa_supplicant FLUSH command more likely to clear all BSS entries 2dbe63a Write reason for scan only_new_results into debug log 242b83a eapol_test: Fix cert_cb() function arguments a8826b1 Interworking: Avoid busy loop in scan result mismatch corner cases edd5939 Interworking: Start ANQP fetch from eloop callback cbc210d RADIUS DAS: Allow PMKSA cache entry to be removed without association 4e871ed RADIUS DAS: Support Acct-Multi-Session-Id as a session identifier b52c0d4 Add authMultiSessionId into hostapd STA info 861beb7 RADIUS DAS: Check for single session match for Disconnect-Request 783b2a9 Interworking: Fix INTERWORKING_CONNECT with zero-length SSID BSS entry 1fef85c nl80211: Fix AP-scan-in-STA-mode error path behavior cebee30 Add domain_match network profile parameter d07d3fb Add peer certificate alt subject name information to EAP events 98a4cd4 D-Bus: Clear cached EAP data on network profile changes 483dd6a Include peer certificate always in EAP events dd5f902 Get rid of a compiler warning d29fa3a Extend VENDOR_ELEM parameters to cover non-P2P Association Request e7d0e97 hostapd: Add vendor specific VHT extension for the 2.4 GHz band Change-Id: I45436c49986cd6bddbd869db3f474871a29ce1dc Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
* Cumulative patch from commit 3e7f1c7980c6e9fc7173f78aa72b2761fcd8924d (DO ↵Dmitry Shmidt2015-01-154-11/+391
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | NOT MERGE) 3e7f1c7 GnuTLS: Add TLS event callbacks for chain success/failure and peer cert 0eb2ed0 GnuTLS: Add support for OCSP stapling as a client cf08e9b Add MESH to modes capabilities db5adfe Add SAE to auth_alg capabilities 0e1bb94 GnuTLS: Verify that server certificate EKU is valid for a server d4d1f5c GnuTLS: Fix tls_disable_time_checks=1 processing 594d1fc GnuTLS: Add support for private_key and client_cert as blobs 79b1dd9 GnuTLS: Fix DER encoding certificate parsing a165145 Add "GET tls_library" to provide information on TLS library and version c3bb84b GnuTLS: Add event callbacks 8ddcd6b GnuTLS: Add support for domain_suffix_match 4bc13bf GnuTLS: Check for any unknown verification failure e0d431a GnuTLS: Add more debug prints for version and session status 65ec7f4 GnuTLS: Move peer certificate validation into callback function 7c82457 GnuTLS: Remove support for versions older than 2.12.x e1d63f6 GnuTLS: Remove old version number checks for 1.3.2 ae0a23a GnuTLS: Remove GNUTLS_INTERNAL_STRUCTURE_HACK db4cf40 GnuTLS: Add support for ca_cert as a blob 224104d TLS: Reject openssl_ciphers parameter in non-OpenSSL cases b09baf3 Work around Windows build issues 6dbbef9 Define host_to_le32() for Windows builds 7d28e46 Fix os_win32 build 0b40247 Remove Network Security Service (NSS) support d166947 schannel: Reject subject_match, altsubject_match, suffix_match 59051f8 TLS: Reject subject_match, altsubject_match, suffix_match f8717ac GnuTLS: Reject subject_match, altsubject_match, suffix_match e24aef1 Fix a typo in domain_suffix_match documentation 394b547 Improve subject_match and domain_suffix_match documentation 8a42a07 trace: Fix out-of-memory testing logic 79cd993 Add address masks to BSSID lists b83e455 Add network specific BSSID black and white lists b3d6a0a Add generic parser for MAC address lists 21c74e8 nl80211: Use a helper function to put mesh_id 85e1fad nl80211: Use a helper function for putting beacon interval 6dfc557 Remove mesh_ht_mode network block parameter 54fe48b mesh: Use the shared function with IBSS to determine channel parameters f7e889f mesh: Convert channel configuration to use common routines 6334330 mesh: Use a separate variable to track whether HT is enabled 1fc4ab2 nl80211: Move debug prints into nl80211_put_freq_params() cae87ab nl80211: Add a helper function for putting basic rates 6b8b077 ibss/mesh: Enable HT40 if supported a828f62 Make check_40mhz_2g4 common fdd989d Make check_20mhz_bss common 0e550fe Make check_40mhz_5g common 6d5d098 Make get_pri_sec_chan() common 5144274 Introduce common allowed_ht40_channel_pair() 5f10b7f Use common hw_get_freq/hw_get_chan helpers in hostapd 269dfe2 Introduce common hw features 1830817 IBSS: Add WPA_DRIVER_FLAGS_HT_IBSS f3b8ad4 SAE: Implement retransmission timer a206e2a SAE: Centralize function for sending initial COMMIT 28c91ee bsd: Fix parsing of ieee80211req_scan_result on FreeBSD and DragonFly 96d1d97 Android: Remove hardcoded ICU include paths from hs20-osu-client a354bcc D-Bus: Use NoMemory error message from CreateInterface 635874b Handle interface disabled/enabled more consistently 8f2cf37 P2P: Indicate reason=UNAVAILABLE for group netdev going down 86a7fbb Verify that eloop_register_read_sock() succeeds for ctrl_iface setup 27d9701 Fix a memory leak on WPA authenticator error path c1c07dc Fix hostapd interface addition error path a156ffd Add support for testing memory allocation failures 52b3943 D-Bus: Fix interface unregistration on error path 96dc9a6 D-Bus (old): Fix interface unregistration on error path ef03557 Fix memory leak on wpa_supplicant_init_wpa() error path 52a8058 TDLS: Fix an interface addition error path f2d5728 D-Bus: Fix string array dict entry parser in out-of-memory case c61bc23 D-Bus: Fix byte array dict entry parser in out-of-memory case dacf605 D-Bus: Fix Introspect() in case of os_strdup() failure 68a8669 D-Bus (old): Fix wpsReg error message f0614bc D-Bus (old): Fix message handler error paths a2af1c7 D-Bus (old): Fix memory leak on error path 3d2e2d5 trace: Fix compiler warning on 32-bit builds with bfd support b9f6560 eloop: Fix WPA_TRACE tracking in case of realloc failure e10422c Fix memory leak on hostapd BSS addition error path 2801659 Fix hostapd initialization error path on allocation failure d58ade2 nl80211: Fix compilation with libnl 1.1 and 2.0 51f3427 crypto: Clear temporary stack buffers after use 77a2c39 crypto: Clear temporary heap allocations before freeing a15a7fc DH: Clear memory explicitly on private key deinit 77c45e2 Add wpabuf_clear_free() to allow clearing of freed memory a90c7d9 OpenSSL: Fix pbkdf2_sha1() wrapper f6ebbcf AES-SIV: Make aes_s2v() static dcf8fbc nl80211: Simplify event processing error paths 38751d8 nl80211: Remove cfg80211 state mismatch workaround for authentication 64ae244 nl80211: Check support for rekey offload on first use Change-Id: Ice94c3cf8e39a6d2cac993aacd0f6d45b31c7c15 Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
* Cumulative patch from commit 8b48e3200680f71ae083b84793e6bdc2099416d2 [DO ↵Dmitry Shmidt2015-01-1313-119/+683
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | NOT MERGE] 8b48e32 wpa_cli: Add MAC address randomization in scan fb37588 ctrl_iface: Add MAC address randomization in scan processing 56c76fa scan: Add MAC address randomization in scan handling 86056fe nl80211: Handle MAC address randomization in scan/sched_scan ff23ed2 driver: Add definitions for MAC address randomization in scan 7db53bb wpa_cli: Implement TDLS start/cancel channel switching commands 72b2605 nl80211: Pass TDLS channel-switch start/stop params to kernel 6b90dea TDLS: Propagate enable/disable channel-switch commands to driver d9d3b78 TDLS: Track TDLS channel switch prohibition in BSS 4daa572 TDLS: Add channel-switch capability flag ca16586 Sync with wireless-testing.git include/uapi/linux/nl80211.h 8c42b36 WMM AC: Reconfigure tspecs on reassociation to the same BSS 677e7a9 WMM AC: Do not fail on unknown IEs in Association Response fecc2bb WMM AC: Delete tspecs on roaming 20fe745 WMM AC: Print user-priority in wmm_ac_status 730a0d1 nl80211: Always register management frames handler ... 209702d Add possibility to set the setband parameter ee82e33 Do not trigger the scan during initialization on Android platforms e69ae5f Reject new SCAN commands if there is a pending request ... 59d7148 nl80211: Provide subtype and reason code for AP SME drivers 9d4ff04 Add external EAPOL transmission option for testing purposes 61fc904 P2P: Handle improper WPS termination on GO during group formation 58b40fd P2P: Clear p2p_go_group_formation_completed on GO start c155305 Complete sme-connect radio work when clearing connection state debb2da P2P: Report group removal reason PSK_FAILURE in timeout case 51465a0 The master branch is now used for v2.4 development Change-Id: I9b9cfa5c5cd4d26b2f3f5595f7c226ac60de6258
* Cumulative patch to Release 2.3Dmitry Shmidt2014-10-091-1/+1
| | | | | | | | | | | | 724fce8 Change version information for the 2.3 release 5cb1440 Update ChangeLog files for v2.3 2b28ef6 browser-wpadebug: Use more robust mechanism for starting browser 3d8a3ff browser-android: Use more robust mechanism for starting browser 17dc39a browser-system: Use more robust mechanism for starting browser 4a274f4 DFS: Allow 80+80 MHz be configured for VHT Change-Id: I5562ac22e5bf8a55d0f7f8944ca0d9c8ebd8d13f Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
* Cumulative patch from commit d5fe4e6c18d94465e8fb4527d51df6e8539c4d6aDmitry Shmidt2014-10-072-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | d5fe4e6 Reserve QCA vendor specific nl80211 commands 34..49 a256506 AES: Extend key wrap implementation to support longer data eefec1e AES: Extend key wrap design to support longer AES keys 98a1571 OpenSSL: Clean up one part from the BoringSSL patch a857296 Support building with BoringSSL 1236eda Android: Remove ctrl_interface=wlan0 from config template 9ffd512 Android: Set pmf=1 to default template 45d8501 Fix out of bounds memory access when removing vendor elements a61fcc1 Clean up authenticator PMKSA cache implementation cb129db Clear PMKSA cache entry data when freeing them 8c8d26a Remove unnecessary PMKSA cache freeing step 9c82990 Fix authenticator OKC fetch from PMKSA cache to avoid infinite loop 47ea24c Fix PMKSA cache timeout from Session-Timeout in WPA/WPA2 cases dc152f3 wpa_supplicant: Enable HT for IBSS 4ec6837 wpa_supplicant: Use hostapd_freq_params in assoc_params 43f02e6 wpa_ctrl: Update wpa_ctrl_recv() documentation for non-block behavior 1274ec2 dbus: Add an interface configuration entry to set the WPS methods 3e0272c nl80211: Re-read MAC address on RTM_NEWLINK 5dfbd72 nl80211: Add get_bss_ifindex() helper f1a6131 P2P: Use only the -m config for P2P management device 08d7665 TDLS: Use WMM IE for propagating peer WMM capability 17729b0 TDLS: Fix concurrent setup test for mac80211 drivers 984dadc TDLS: Set the initiator during tdls_mgmt operations 01cb5df Sync with wireless-testing.git include/uapi/linux/nl80211.h ca3c6b4 nl80211: Fix compatibility with older version of libnl d76426c TDLS: Filter AID value properly for VHT peers Change-Id: Ia2156628a590c502d9111de2727da642ff435d9a Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
* Cumulative patch from commit a313d17de943cbaf12cbf67d666af14791be8ad2Dmitry Shmidt2014-09-301-1/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | a313d17 Extend random MAC address support to allow OUI to be kept 1cbdb9d Add helper function for generating random MAC addresses with same OUI 97ed9a0 nl80211: Remove bridge FDB entry upon sta_remove() 39323bc AP: hostapd_setup_bss() code clean-up 1595eb9 P2P: Add support for 60 GHz social channel b6ebdfb Extend STATUS command with frequency information 375f4a3 hostapd: Avoid dead code with P2P not enabled 6a60488 dbus: Add a global property to set or unset WFD IEs 4bd7e16 wifi_display: Add a utility function to set WFD subelements from IEs d417744 wifi_display: Add a utility function to get the sub-elements as IEs a8833b8 util: Don't use "\e" 8c6f4a5 ap_config.c: fix typo for "capabilities" 6e252b0 WPS: Fix WPS-in-search check when STA_AUTOCONNECT is disabled e5fdc05 P2P: Remove unecessary sanity check for global p2p ee285df P2P: Flush services based on global p2p init and not p2p ifaces 7139cf4 P2P: Decrement sd_pending_bcast_queries when sd returns success dbdc9a1 nl80211: Fix memory leak on start radar detection error path ed8e005 hostap: nl80211 use nl80211_put_freq_params c267753 Add support for using random local MAC address 4d8fb63 Add helper function for generating random MAC addresses fee354c nl80211: Add command for changing local MAC address e49cabc P2P: Set timeout when starting GO Negotiation from Probe Req RX 7549c17 P2P: Clear pending_listen_freq when starting GO Neg/Invite b497a21 nl80211: Ignore auth/assoc events when testing driver-SME 79e2b1c Add PMKSA_FLUSH ctrl_iface command 55c2bfa wpa_cli: Support action scripts with global ctrl_iface 063f850 wpa_cli: Increase event buffer size to 4096 bytes fa0e917 wpa_cli: Fix PING in interactive mode with ifname_prefix c53a9bf Check for driver's DFS offload capability before handling DFS 068e387 STA: Update scan results for ap_scan=1 skip-selection case also 7a4a93b dbus: Add SignalPoll() method to report current signal properties a6ab82d Android: Add NO_EVENTS parameter to status command df2508d P2P: Check os_get_random() return value more consistently 54461f3 RADIUS server: Remove unreachable code e4474c1 FT: Fix hostapd with driver-based SME to authorize the STA 0800f9e nl80211: Add roaming policy update using QCA vendor command 0ef023e Add support for driver command to update roaming policy 0cd9846 nl80211: Print debug info on STA flag changes 17e2091 P2P: Fix radio work issue with wait-for-peer GO Negotiation 76db5b6 Work around broken AP PMKSA caching implementation b08d5fa WPS: Set EAPOL workarounds dynamically based on association 8511a0f WPS: Extend internal entropy pool help for key/snonce derivation abc0553 Remove WPA_EVENT_SCAN_STARTED message from MSG_INFO log c45dabb P2P: Deauth p2p client just after dbus notify 3ee1856 nl80211: Register eloop after hs20 action frame 3bd3257 dbus: add BSS Age property to indicate last-seen time 5c61d21 openssl: Fix memory leak in openssl ec deinit 10e7948 Fix hostapd GET_CONFIG wpa_pairwise_cipher value 3a413e0 RADIUS client: Check getsockname() return value 9c196f7 HTTP: Fix OCSP status check cb5ef95 SME: Verify that os_get_random() succeeds for SA Query c9cd78e RADIUS server: Fix IPv6 radiusAuthClientAddress mask 5e62cfd P2P: Verify that os_get_random() succeeds 6473e80 EAP-PAX server: Add explicit CID length limit 6a6566c Remove unnecessarily shadowed local variable df756b3 hostapd: Remove unused variable assignment e47abdb TDLS: Decline Setup Request with status code 37 if BSSID does not match ce2002a TDLS: Add RSN and Timeout interval IEs in TDLS Discovery Response frame 1c2aa04 P2P: Do not add P2P IEs on P2P disabled interface f2e9083 nl80211: Add more RTM_NEWLINK/DELLINK debug messages 728ff2f nl80211: Fix RTM_DELLINK processing for bridge events e5a4b85 WPS: Merge mixed-WPA/WPA2 credentials if received in same session db9418b Add printf NULL checks to silence static analyzer 4e53675 P2P: Overwrite pending interface only after verifying BSS entry 04a258e hostapd: Check that EVENT_ASSOC data is present before using it 1cc0d6a wpa_supplicant: Use freq_list scan filtar in sched_scan Change-Id: Ibc18f6761b3ccfe8fb4479f26f53e70942068bc8 Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
* hostapd: Add wowlan_triggers config paramDmitry Shmidt2014-09-031-0/+76
| | | | | | | | | | | New kernels in wiphy_suspend() will call cfg80211_leave_all() that will eventually end up in cfg80211_stop_ap() unless wowlan_triggers were set. Bug: 17269024 Change-Id: I14d2191eda090cd86cabe1e5f059975fdf2f69e8 Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
* Cumulative patch from commit 4aa9c156e583c64cf5d90751ec888c478e1155c2Dmitry Shmidt2014-08-132-0/+25
| | | | | | | | | | | | | | | | | | | 4aa9c15 dbus: Close dbus dict just after appending data b8d87ed nl80211: Disable Probe Request reporting for static AP during deinit bf144cf nl80211: Do not change iftype for static AP interface 61157af wext: Add signal_poll callback af65bc3 P2P: Use ssid instead of wpa_ssid to find GO iface 6c460ea Add RSN cipher/AKM suite attributes into RADIUS messages cdffd72 Add WLAN-HESSID into RADIUS messages 69002fb Add Mobility-Domain-Id into RADIUS messages 4a0693a dbus: Declare and implement GroupFinished as for GroupStarted 2fa980f P2P: Cancel pending action TX radio work on p2p_cancel 8b627b7 Fix writing of the wowlan_triggers parameter Bug: 16877362 Change-Id: Ifbb8902e2634470ba212a82cd1ca49880633d961 Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
* Cumulative patch from commit 6d00ab04302df257cb3092b2b31b4eac42e77569Dmitry Shmidt2014-07-162-0/+20
| | | | | | | | | 6d00ab0 nl80211: Ensure nl_preq unregistration on driver deinit 71a0e39 P2P: Make unrecognized vendor elements available in P2P_PEER 86bd36f Add generic mechanism for adding vendor elements into frames Change-Id: I392072a37d8dbfc92769082b60f052f7095466b6 Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
* Cumulative patch from commit e376290c667e970d751acc916e0efe2ed16292edDmitry Shmidt2014-07-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | e376290 HS 2.0R2: Add update_identifier field to network 5bc2857 Fix some sparse warnings about u16 vs. le16 42619d6 Fix CTRL-EVENT-REGDOM-CHANGE event init= value a520bf4 Mark function static 0cb79d3 dbus: Fix indentation level to match code logic 8f03ac9 Mark functions static 6891f0e Allow SCAN command to specify scan_ssid=1 SSIDs 18389ab WPS: Clear keys/PINs explicitly b7175b4 Clear hostapd configuration keys explicitly d1ecca6 HS 2.0 R2: Clear hs20-osu-client configuration keys explicitly 0a13e06 EAP server: Clear keying material on deinit f534ee0 EAP peer: Clear keying material on deinit 19c48da Clear wpa_supplicant configuration keys explicitly 28bfa29 EAP-AKA: Remove unnecessary dead increment 62493df EAP-GPSK: Avoid dead increment by checking pos pointer 164a453 FT: Debug print extra response data 70bfc77 PCSC: Debug print extra response data 5dbbf36 Interworking: Remove unnecessary dead increment a1e46f3 Check for no key_mgmt/proto/auth_alg entries in config writer 290ea6a Remove unnecessary tracking of first entry d3fa2bb WFD: Explicit limit for subelement length (CID 68127) 745ef18 HS 2.0: Verify assoc_req_ie buffer size for indication elements 0233dca SAE: Use os_memcmp_const() for hash/password comparisons 34ef46c WEP shared key: Use os_memcmp_const() for hash/password comparisons 3e4b77c EAP-GTC: Use os_memcmp_const() for hash/password comparisons a6eae3f EAP-MSCHAPv2: Use os_memcmp_const() for hash/password comparisons 30411b3 EAP-TTLS: Use os_memcmp_const() for hash/password comparisons a564d9c EAP-MD5: Use os_memcmp_const() for hash/password comparisons 4685482 EAP-PSK: Use os_memcmp_const() for hash/password comparisons cba0f86 EAP-PEAP: Use os_memcmp_const() for hash/password comparisons 7b1e745 EAP-LEAP: Use os_memcmp_const() for hash/password comparisons 8f92826 EAP-GPSK: Use os_memcmp_const() for hash/password comparisons e1550d4 EAP-PAX: Use os_memcmp_const() for hash/password comparisons c434503 EAP-FAST: Use os_memcmp_const() for hash/password comparisons dddf7bb EAP-EKE: Use os_memcmp_const() for hash/password comparisons dfb5608 EAP-SAKE: Use os_memcmp_const() for hash/password comparisons 05c79d6 EAP-SIM/AKA: Use os_memcmp_const() for hash/password comparisons 675ddad EAP-IKEv2: Use os_memcmp_const() for hash/password comparisons 2049a3c TLS: Use os_memcmp_const() for hash/password comparisons a79aea5 Milenage: Use os_memcmp_const() for hash/password comparisons 05f916e AES-GCM: Use os_memcmp_const() for hash/password comparisons 87a5c93 AES-CCM: Use os_memcmp_const() for hash/password comparisons 7c24f53 EAPOL supplicant: Use os_memcmp_const() for hash/password comparisons 870834a RSN authenticator: Use os_memcmp_const() for hash/password comparisons 0d15b69 RSN supplicant: Use os_memcmp_const() for hash/password comparisons 72619ce MACsec: Use os_memcmp_const() for hash/password comparisons c237195 RADIUS: Use os_memcmp_const() for hash/password comparisons ce9c9bc WPS: Use os_memcmp_const() for hash/password comparisons afc3c8b Add constant time memory comparison function os_memcmp_const ee352f1 EAP-pwd: Add explicit total length limit b2b8a4c EAP-SIM/AKA: Pass EAP type as argument to eap_sim_msg_finish() f107d00 PeerKey: Clean up EAPOL-Key Key Data processing 010fc5f dbus: Clean up array-array-type property getter Change-Id: I1dbe483be2678a7468e6955d70ea261f8e53b26d Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
* Cumulative patch from commit f95a4524c2c00476e46b7999426ffdcbc7cd538fDmitry Shmidt2014-06-232-0/+58
| | | | | | | | | | | | | | f95a452 nl80211: Improve debug output by printing SA and DA in frames dedfa44 Print frame type name in debug output 57a8f8a nl80211: Use low-priority scan for OBSS scan 1b928f9 P2P: Allow passphrase length to be configured e985246 eapol_test: Add PC/SC reader and PIN command line arguments 5a62060 Use pcsc_reader configuration in one for scard_init() call f3c6b23 EAP-SIM': Fix AT_KDF parser to avoid infinite loop 79122f9 EAP-SIM/AKA: Remove unused RESULT_FAILURE state Change-Id: I142bed35a75ed228e145e50c961dcde22a9815f7 Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-12-11 02:00:51 +0000