Accumulative patch from commit 1075b2957169d8f9d6dddd7679339c751dc9515b

1075b29 P2P: Report group formation failure on error to start GO mode
b62b29e Do not block on ctrl_iface monitor events
eb7ddbf WPS: Stop SSDP service before freeing the pending entries
98cbc0a Remove forgotten Xcode defines
0b9d3b2 Interworking: Relax 3GPP info PLMN matching for MNC
c7a67a7 WPS: Disconnect when removing existing WPS network block
fe65847 EAP-EKE: Add server implementation
7e7610d EAP-EKE: Add peer implementation
489202d EAP-SAKE: Use configured server identity
a607b42 EAP-PSK: Use configured server identity
15b042b EAP-MSCHAPv2: Use configured server identity
162865b EAP-IKEv2 server: Use configured server identity
8f89d82 EAP-GPSK server: Use configured server identity
67fe933 Add server identity configuration for EAP server
06aeff5 dbus: Register the AutoScan method call at the right place
78f79fe P2P: Do not add ctrl interface for P2P_DEVICE (p2p-dev-*)
1c42b42 P2P: Fix TDLS and l2_packet init without P2P Device interface
9e6a321 Fix non-P2P build after the P2P_DEVICE changes
d53d259 Fix build with older OpenSSL versions
54d4ba4 nl80211: Silence a compiler warning with older gcc versions
2e5ba4b P2P: Derive group interface name bit more sensibly
c68f620 P2P: Create P2P Device interface if supported
851b0c5 nl80211: Do not indicate P2P_DEVICE support by default
bb4028f P2P: Ignore p2p_no_group_iface when driver advertizes P2P_DEVICE support
7940c79 nl80211: Use wdev id when cancelling wait for frame using P2P_DEVICE
f608081 nl80211: Verify P2P GO/client address with all interface addresses
5fbcb45 nl80211: Fix determining phy name for P2P Device
27ce1d6 nl80211: Fix nl80211_get_wiphy_index() for P2P Device
080585c Add support for OCSP stapling to validate server certificate
72950ed P2P: Remove a call to wpas_p2p_deinit_global()
ab7a1ad nl80211: Fix P2P group interface creating using P2P Device
fa93de4 nl80211: Use wdev_id in nl80211_create_iface_once()
fdc554b nl80211: Use wdev id to obtain P2P Device scan results
597b94f nl80211: Add .get_mac_addr() callback for P2P Device
8e12685 nl80211: Rework setting interface mode
91724d6 nl80211: Introduce i802_set_iface_flags()
eb4582f nl80211: Remove P2P Device interface upon .deinit()
f632e48 nl80211: Fix P2P Device interface initialization
e472e1b nl80211: Handle creation of P2P Device interface
01517c8 nl80211: Allow Android P2P functionality
6bae92e nl80211: Add support for P2P Device in add interface
d6dcfcd nl80211: Add a handler to create_interface
d3aaef8 nl80211: Hold wdev identification for P2P Device
7aad838 nl80211: Identify if nl80211 is capable of P2P Device abstraction
6a71413 nl80211: Rename is_p2p_interface
8393e1a nl80211: Print interface name on set_key()
80ebfd9 VLAN: Avoid access to non-existing interfaces
4345fe9 bridge: Track inter-BSS usage
459eee9 bridge: Use safe default bridge interface
2aaeedf bridge: Give bridge name in per-bss configuration
8a901d7 D-Bus: Emit signal when a station is authorized or deauthorized
9578329 Add AVG_RSSI report in signal_poll
2cc8d8f Add bandwidth and center freq info to signal_poll
1e0e943 Remove 802.11b rates only in case of P2P group operation
2090a0b nl80211: Add prints for kernel events
8743676 TDLS: Validate ext_supp_rates in copy_supp_rates
85b4eac P2P: Do not reply to 802.11b-only Probe Request frames as GO
ec7b97a Interworking: Add support for using eap_proxy offload
4331263 Fix session timeout after ANQP dummy STA entry with SME-in-driver
56cb4e1 wpadebug: Add option to ignore SSL errors
aa20e1a Remove CONFIG_NO_WPA2 build parameter
5d5c4ee Remove compiler warnings with CONFIG_NO_SCAN_PROCESSING
9aaa695 Remove compiler warnings if TDLS is enabled without WPA2
84ae1d4 Fix WNM build without WPA2
c33d5eb Fix build without WPA2 or EAP
1aef400 IBSS RSN: Implement disconnect() callback using sta_deauth()

Change-Id: I4593be5b1478f6532da917423b1d2afa95fb8020
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

1 files changed, 25 insertions, 0 deletions

diff --git a/hostapd/hostapd.conf b/hostapd/hostapd.conf
index be15b860..68c40694 100644
--- a/hostapd/hostapd.conf
+++ b/hostapd/hostapd.conf
@@ -666,6 +666,11 @@ eap_server=0
 # Passphrase for private key
 #private_key_passwd=secret passphrase
 
+# Server identity
+# EAP methods that provide mechanism for authenticated server identity delivery
+# use this value. If not set, "hostapd" is used as a default.
+#server_id=server.example.com
+
 # Enable CRL verification.
 # Note: hostapd does not yet support CRL downloading based on CDP. Thus, a
 # valid CRL signed by the CA is required to be included in the ca_cert file.
@@ -677,6 +682,20 @@ eap_server=0
 # 2 = check all CRLs in the certificate path
 #check_crl=1
 
+# Cached OCSP stapling response (DER encoded)
+# If set, this file is sent as a certificate status response by the EAP server
+# if the EAP peer requests certificate status in the ClientHello message.
+# This cache file can be updated, e.g., by running following command
+# periodically to get an update from the OCSP responder:
+# openssl ocsp \
+#	-no_nonce \
+#	-CAfile /etc/hostapd.ca.pem \
+#	-issuer /etc/hostapd.ca.pem \
+#	-cert /etc/hostapd.server.pem \
+#	-url http://ocsp.example.com:8888/ \
+#	-respout /tmp/ocsp-cache.der
+#ocsp_stapling_response=/tmp/ocsp-cache.der
+
 # dh_file: File path to DH/DSA parameters file (in PEM format)
 # This is an optional configuration file for setting parameters for an
 # ephemeral DH key exchange. In most cases, the default RSA authentication does
@@ -844,6 +863,12 @@ own_ip_addr=127.0.0.1
 # to the bridge.
 #vlan_tagged_interface=eth0
 
+# Bridge (prefix) to add the wifi and the tagged interface to. This gets the
+# VLAN ID appended. It defaults to brvlan%d if no tagged interface is given
+# and br%s.%d if a tagged interface is given, provided %s = tagged interface
+# and %d = VLAN ID.
+#vlan_bridge=brvlan
+
 # When hostapd creates a VLAN interface on vlan_tagged_interfaces, it needs
 # to know how to name it.
 # 0 = vlan<XXX>, e.g., vlan1