wpa_supplicant: Change wpa_supplicant.conf template name

Change-Id: If51126b85bf7c67d308e97e7e48a11d4535ec995
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

4 files changed, 896 insertions, 896 deletions

diff --git a/wpa_supplicant/wpa_supplicant.conf b/wpa_supplicant/wpa_supplicant.conf
index a08eb33d..b0157446 100644
--- a/wpa_supplicant/wpa_supplicant.conf
+++ b/wpa_supplicant/wpa_supplicant.conf
@@ -1,6 +1,892 @@
-##### wpa_supplicant configuration file template #####
-update_config=1
-ctrl_interface=wlan0
+##### Example wpa_supplicant configuration file ###############################
+#
+# This file describes configuration file format and lists all available option.
+# Please also take a look at simpler configuration examples in 'examples'
+# subdirectory.
+#
+# Empty lines and lines starting with # are ignored
+
+# NOTE! This file may contain password information and should probably be made
+# readable only by root user on multiuser systems.
+
+# Note: All file paths in this configuration file should use full (absolute,
+# not relative to working directory) path in order to allow working directory
+# to be changed. This can happen if wpa_supplicant is run in the background.
+
+# Whether to allow wpa_supplicant to update (overwrite) configuration
+#
+# This option can be used to allow wpa_supplicant to overwrite configuration
+# file whenever configuration is changed (e.g., new network block is added with
+# wpa_cli or wpa_gui, or a password is changed). This is required for
+# wpa_cli/wpa_gui to be able to store the configuration changes permanently.
+# Please note that overwriting configuration file will remove the comments from
+# it.
+#update_config=1
+
+# global configuration (shared by all network blocks)
+#
+# Parameters for the control interface. If this is specified, wpa_supplicant
+# will open a control interface that is available for external programs to
+# manage wpa_supplicant. The meaning of this string depends on which control
+# interface mechanism is used. For all cases, the existance of this parameter
+# in configuration is used to determine whether the control interface is
+# enabled.
+#
+# For UNIX domain sockets (default on Linux and BSD): This is a directory that
+# will be created for UNIX domain sockets for listening to requests from
+# external programs (CLI/GUI, etc.) for status information and configuration.
+# The socket file will be named based on the interface name, so multiple
+# wpa_supplicant processes can be run at the same time if more than one
+# interface is used.
+# /var/run/wpa_supplicant is the recommended directory for sockets and by
+# default, wpa_cli will use it when trying to connect with wpa_supplicant.
+#
+# Access control for the control interface can be configured by setting the
+# directory to allow only members of a group to use sockets. This way, it is
+# possible to run wpa_supplicant as root (since it needs to change network
+# configuration and open raw sockets) and still allow GUI/CLI components to be
+# run as non-root users. However, since the control interface can be used to
+# change the network configuration, this access needs to be protected in many
+# cases. By default, wpa_supplicant is configured to use gid 0 (root). If you
+# want to allow non-root users to use the control interface, add a new group
+# and change this value to match with that group. Add users that should have
+# control interface access to this group. If this variable is commented out or
+# not included in the configuration file, group will not be changed from the
+# value it got by default when the directory or socket was created.
+#
+# When configuring both the directory and group, use following format:
+# DIR=/var/run/wpa_supplicant GROUP=wheel
+# DIR=/var/run/wpa_supplicant GROUP=0
+# (group can be either group name or gid)
+#
+# For UDP connections (default on Windows): The value will be ignored. This
+# variable is just used to select that the control interface is to be created.
+# The value can be set to, e.g., udp (ctrl_interface=udp)
+#
+# For Windows Named Pipe: This value can be used to set the security descriptor
+# for controlling access to the control interface. Security descriptor can be
+# set using Security Descriptor String Format (see http://msdn.microsoft.com/
+# library/default.asp?url=/library/en-us/secauthz/security/
+# security_descriptor_string_format.asp). The descriptor string needs to be
+# prefixed with SDDL=. For example, ctrl_interface=SDDL=D: would set an empty
+# DACL (which will reject all connections). See README-Windows.txt for more
+# information about SDDL string format.
+#
+ctrl_interface=/var/run/wpa_supplicant
+
+# IEEE 802.1X/EAPOL version
+# wpa_supplicant is implemented based on IEEE Std 802.1X-2004 which defines
+# EAPOL version 2. However, there are many APs that do not handle the new
+# version number correctly (they seem to drop the frames completely). In order
+# to make wpa_supplicant interoperate with these APs, the version number is set
+# to 1 by default. This configuration value can be used to set it to the new
+# version (2).
 eapol_version=1
+
+# AP scanning/selection
+# By default, wpa_supplicant requests driver to perform AP scanning and then
+# uses the scan results to select a suitable AP. Another alternative is to
+# allow the driver to take care of AP scanning and selection and use
+# wpa_supplicant just to process EAPOL frames based on IEEE 802.11 association
+# information from the driver.
+# 1: wpa_supplicant initiates scanning and AP selection; if no APs matching to
+#    the currently enabled networks are found, a new network (IBSS or AP mode
+#    operation) may be initialized (if configured) (default)
+# 0: driver takes care of scanning, AP selection, and IEEE 802.11 association
+#    parameters (e.g., WPA IE generation); this mode can also be used with
+#    non-WPA drivers when using IEEE 802.1X mode; do not try to associate with
+#    APs (i.e., external program needs to control association). This mode must
+#    also be used when using wired Ethernet drivers.
+# 2: like 0, but associate with APs using security policy and SSID (but not
+#    BSSID); this can be used, e.g., with ndiswrapper and NDIS drivers to
+#    enable operation with hidden SSIDs and optimized roaming; in this mode,
+#    the network blocks in the configuration file are tried one by one until
+#    the driver reports successful association; each network block should have
+#    explicit security policy (i.e., only one option in the lists) for
+#    key_mgmt, pairwise, group, proto variables
+# When using IBSS or AP mode, ap_scan=2 mode can force the new network to be
+# created immediately regardless of scan results. ap_scan=1 mode will first try
+# to scan for existing networks and only if no matches with the enabled
+# networks are found, a new IBSS or AP mode network is created.
 ap_scan=1
+
+# EAP fast re-authentication
+# By default, fast re-authentication is enabled for all EAP methods that
+# support it. This variable can be used to disable fast re-authentication.
+# Normally, there is no need to disable this.
 fast_reauth=1
+
+# OpenSSL Engine support
+# These options can be used to load OpenSSL engines.
+# The two engines that are supported currently are shown below:
+# They are both from the opensc project (http://www.opensc.org/)
+# By default no engines are loaded.
+# make the opensc engine available
+#opensc_engine_path=/usr/lib/opensc/engine_opensc.so
+# make the pkcs11 engine available
+#pkcs11_engine_path=/usr/lib/opensc/engine_pkcs11.so
+# configure the path to the pkcs11 module required by the pkcs11 engine
+#pkcs11_module_path=/usr/lib/pkcs11/opensc-pkcs11.so
+
+# Dynamic EAP methods
+# If EAP methods were built dynamically as shared object files, they need to be
+# loaded here before being used in the network blocks. By default, EAP methods
+# are included statically in the build, so these lines are not needed
+#load_dynamic_eap=/usr/lib/wpa_supplicant/eap_tls.so
+#load_dynamic_eap=/usr/lib/wpa_supplicant/eap_md5.so
+
+# Driver interface parameters
+# This field can be used to configure arbitrary driver interace parameters. The
+# format is specific to the selected driver interface. This field is not used
+# in most cases.
+#driver_param="field=value"
+
+# Country code
+# The ISO/IEC alpha2 country code for the country in which this device is
+# currently operating.
+#country=US
+
+# Maximum lifetime for PMKSA in seconds; default 43200
+#dot11RSNAConfigPMKLifetime=43200
+# Threshold for reauthentication (percentage of PMK lifetime); default 70
+#dot11RSNAConfigPMKReauthThreshold=70
+# Timeout for security association negotiation in seconds; default 60
+#dot11RSNAConfigSATimeout=60
+
+# Wi-Fi Protected Setup (WPS) parameters
+
+# Universally Unique IDentifier (UUID; see RFC 4122) of the device
+# If not configured, UUID will be generated based on the local MAC address.
+#uuid=12345678-9abc-def0-1234-56789abcdef0
+
+# Device Name
+# User-friendly description of device; up to 32 octets encoded in UTF-8
+#device_name=Wireless Client
+
+# Manufacturer
+# The manufacturer of the device (up to 64 ASCII characters)
+#manufacturer=Company
+
+# Model Name
+# Model of the device (up to 32 ASCII characters)
+#model_name=cmodel
+
+# Model Number
+# Additional device description (up to 32 ASCII characters)
+#model_number=123
+
+# Serial Number
+# Serial number of the device (up to 32 characters)
+#serial_number=12345
+
+# Primary Device Type
+# Used format: <categ>-<OUI>-<subcateg>
+# categ = Category as an integer value
+# OUI = OUI and type octet as a 4-octet hex-encoded value; 0050F204 for
+#       default WPS OUI
+# subcateg = OUI-specific Sub Category as an integer value
+# Examples:
+#   1-0050F204-1 (Computer / PC)
+#   1-0050F204-2 (Computer / Server)
+#   5-0050F204-1 (Storage / NAS)
+#   6-0050F204-1 (Network Infrastructure / AP)
+#device_type=1-0050F204-1
+
+# OS Version
+# 4-octet operating system version number (hex string)
+#os_version=01020300
+
+# Config Methods
+# List of the supported configuration methods
+# Available methods: usba ethernet label display ext_nfc_token int_nfc_token
+#	nfc_interface push_button keypad virtual_display physical_display
+#	virtual_push_button physical_push_button
+# For WSC 1.0:
+#config_methods=label display push_button keypad
+# For WSC 2.0:
+#config_methods=label virtual_display virtual_push_button keypad
+
+# Credential processing
+#   0 = process received credentials internally (default)
+#   1 = do not process received credentials; just pass them over ctrl_iface to
+#	external program(s)
+#   2 = process received credentials internally and pass them over ctrl_iface
+#	to external program(s)
+#wps_cred_processing=0
+
+# Maximum number of BSS entries to keep in memory
+# Default: 200
+# This can be used to limit memory use on the BSS entries (cached scan
+# results). A larger value may be needed in environments that have huge number
+# of APs when using ap_scan=1 mode.
+#bss_max_count=200
+
+
+# filter_ssids - SSID-based scan result filtering
+# 0 = do not filter scan results (default)
+# 1 = only include configured SSIDs in scan results/BSS table
+#filter_ssids=0
+
+
+# network block
+#
+# Each network (usually AP's sharing the same SSID) is configured as a separate
+# block in this configuration file. The network blocks are in preference order
+# (the first match is used).
+#
+# network block fields:
+#
+# disabled:
+#	0 = this network can be used (default)
+#	1 = this network block is disabled (can be enabled through ctrl_iface,
+#	    e.g., with wpa_cli or wpa_gui)
+#
+# id_str: Network identifier string for external scripts. This value is passed
+#	to external action script through wpa_cli as WPA_ID_STR environment
+#	variable to make it easier to do network specific configuration.
+#
+# ssid: SSID (mandatory); either as an ASCII string with double quotation or
+#	as hex string; network name
+#
+# scan_ssid:
+#	0 = do not scan this SSID with specific Probe Request frames (default)
+#	1 = scan with SSID-specific Probe Request frames (this can be used to
+#	    find APs that do not accept broadcast SSID or use multiple SSIDs;
+#	    this will add latency to scanning, so enable this only when needed)
+#
+# bssid: BSSID (optional); if set, this network block is used only when
+#	associating with the AP using the configured BSSID
+#
+# priority: priority group (integer)
+# By default, all networks will get same priority group (0). If some of the
+# networks are more desirable, this field can be used to change the order in
+# which wpa_supplicant goes through the networks when selecting a BSS. The
+# priority groups will be iterated in decreasing priority (i.e., the larger the
+# priority value, the sooner the network is matched against the scan results).
+# Within each priority group, networks will be selected based on security
+# policy, signal strength, etc.
+# Please note that AP scanning with scan_ssid=1 and ap_scan=2 mode are not
+# using this priority to select the order for scanning. Instead, they try the
+# networks in the order that used in the configuration file.
+#
+# mode: IEEE 802.11 operation mode
+# 0 = infrastructure (Managed) mode, i.e., associate with an AP (default)
+# 1 = IBSS (ad-hoc, peer-to-peer)
+# 2 = AP (access point)
+# Note: IBSS can only be used with key_mgmt NONE (plaintext and static WEP)
+# and key_mgmt=WPA-NONE (fixed group key TKIP/CCMP). WPA-None requires
+# following network block options:
+# proto=WPA, key_mgmt=WPA-NONE, pairwise=NONE, group=TKIP (or CCMP, but not
+# both), and psk must also be set.
+#
+# frequency: Channel frequency in megahertz (MHz) for IBSS, e.g.,
+# 2412 = IEEE 802.11b/g channel 1. This value is used to configure the initial
+# channel for IBSS (adhoc) networks. It is ignored in the infrastructure mode.
+# In addition, this value is only used by the station that creates the IBSS. If
+# an IBSS network with the configured SSID is already present, the frequency of
+# the network will be used instead of this configured value.
+#
+# scan_freq: List of frequencies to scan
+# Space-separated list of frequencies in MHz to scan when searching for this
+# BSS. If the subset of channels used by the network is known, this option can
+# be used to optimize scanning to not occur on channels that the network does
+# not use. Example: scan_freq=2412 2437 2462
+#
+# freq_list: Array of allowed frequencies
+# Space-separated list of frequencies in MHz to allow for selecting the BSS. If
+# set, scan results that do not match any of the specified frequencies are not
+# considered when selecting a BSS.
+#
+# proto: list of accepted protocols
+# WPA = WPA/IEEE 802.11i/D3.0
+# RSN = WPA2/IEEE 802.11i (also WPA2 can be used as an alias for RSN)
+# If not set, this defaults to: WPA RSN
+#
+# key_mgmt: list of accepted authenticated key management protocols
+# WPA-PSK = WPA pre-shared key (this requires 'psk' field)
+# WPA-EAP = WPA using EAP authentication
+# IEEE8021X = IEEE 802.1X using EAP authentication and (optionally) dynamically
+#	generated WEP keys
+# NONE = WPA is not used; plaintext or static WEP could be used
+# WPA-PSK-SHA256 = Like WPA-PSK but using stronger SHA256-based algorithms
+# WPA-EAP-SHA256 = Like WPA-EAP but using stronger SHA256-based algorithms
+# If not set, this defaults to: WPA-PSK WPA-EAP
+#
+# auth_alg: list of allowed IEEE 802.11 authentication algorithms
+# OPEN = Open System authentication (required for WPA/WPA2)
+# SHARED = Shared Key authentication (requires static WEP keys)
+# LEAP = LEAP/Network EAP (only used with LEAP)
+# If not set, automatic selection is used (Open System with LEAP enabled if
+# LEAP is allowed as one of the EAP methods).
+#
+# pairwise: list of accepted pairwise (unicast) ciphers for WPA
+# CCMP = AES in Counter mode with CBC-MAC [RFC 3610, IEEE 802.11i/D7.0]
+# TKIP = Temporal Key Integrity Protocol [IEEE 802.11i/D7.0]
+# NONE = Use only Group Keys (deprecated, should not be included if APs support
+#	pairwise keys)
+# If not set, this defaults to: CCMP TKIP
+#
+# group: list of accepted group (broadcast/multicast) ciphers for WPA
+# CCMP = AES in Counter mode with CBC-MAC [RFC 3610, IEEE 802.11i/D7.0]
+# TKIP = Temporal Key Integrity Protocol [IEEE 802.11i/D7.0]
+# WEP104 = WEP (Wired Equivalent Privacy) with 104-bit key
+# WEP40 = WEP (Wired Equivalent Privacy) with 40-bit key [IEEE 802.11]
+# If not set, this defaults to: CCMP TKIP WEP104 WEP40
+#
+# psk: WPA preshared key; 256-bit pre-shared key
+# The key used in WPA-PSK mode can be entered either as 64 hex-digits, i.e.,
+# 32 bytes or as an ASCII passphrase (in which case, the real PSK will be
+# generated using the passphrase and SSID). ASCII passphrase must be between
+# 8 and 63 characters (inclusive).
+# This field is not needed, if WPA-EAP is used.
+# Note: Separate tool, wpa_passphrase, can be used to generate 256-bit keys
+# from ASCII passphrase. This process uses lot of CPU and wpa_supplicant
+# startup and reconfiguration time can be optimized by generating the PSK only
+# only when the passphrase or SSID has actually changed.
+#
+# eapol_flags: IEEE 802.1X/EAPOL options (bit field)
+# Dynamic WEP key required for non-WPA mode
+# bit0 (1): require dynamically generated unicast WEP key
+# bit1 (2): require dynamically generated broadcast WEP key
+# 	(3 = require both keys; default)
+# Note: When using wired authentication, eapol_flags must be set to 0 for the
+# authentication to be completed successfully.
+#
+# mixed_cell: This option can be used to configure whether so called mixed
+# cells, i.e., networks that use both plaintext and encryption in the same
+# SSID, are allowed when selecting a BSS form scan results.
+# 0 = disabled (default)
+# 1 = enabled
+#
+# proactive_key_caching:
+# Enable/disable opportunistic PMKSA caching for WPA2.
+# 0 = disabled (default)
+# 1 = enabled
+#
+# wep_key0..3: Static WEP key (ASCII in double quotation, e.g. "abcde" or
+# hex without quotation, e.g., 0102030405)
+# wep_tx_keyidx: Default WEP key index (TX) (0..3)
+#
+# peerkey: Whether PeerKey negotiation for direct links (IEEE 802.11e DLS) is
+# allowed. This is only used with RSN/WPA2.
+# 0 = disabled (default)
+# 1 = enabled
+#peerkey=1
+#
+# wpa_ptk_rekey: Maximum lifetime for PTK in seconds. This can be used to
+# enforce rekeying of PTK to mitigate some attacks against TKIP deficiencies.
+#
+# Following fields are only used with internal EAP implementation.
+# eap: space-separated list of accepted EAP methods
+#	MD5 = EAP-MD5 (unsecure and does not generate keying material ->
+#			cannot be used with WPA; to be used as a Phase 2 method
+#			with EAP-PEAP or EAP-TTLS)
+#       MSCHAPV2 = EAP-MSCHAPv2 (cannot be used separately with WPA; to be used
+#		as a Phase 2 method with EAP-PEAP or EAP-TTLS)
+#       OTP = EAP-OTP (cannot be used separately with WPA; to be used
+#		as a Phase 2 method with EAP-PEAP or EAP-TTLS)
+#       GTC = EAP-GTC (cannot be used separately with WPA; to be used
+#		as a Phase 2 method with EAP-PEAP or EAP-TTLS)
+#	TLS = EAP-TLS (client and server certificate)
+#	PEAP = EAP-PEAP (with tunnelled EAP authentication)
+#	TTLS = EAP-TTLS (with tunnelled EAP or PAP/CHAP/MSCHAP/MSCHAPV2
+#			 authentication)
+#	If not set, all compiled in methods are allowed.
+#
+# identity: Identity string for EAP
+#	This field is also used to configure user NAI for
+#	EAP-PSK/PAX/SAKE/GPSK.
+# anonymous_identity: Anonymous identity string for EAP (to be used as the
+#	unencrypted identity with EAP types that support different tunnelled
+#	identity, e.g., EAP-TTLS)
+# password: Password string for EAP. This field can include either the
+#	plaintext password (using ASCII or hex string) or a NtPasswordHash
+#	(16-byte MD4 hash of password) in hash:<32 hex digits> format.
+#	NtPasswordHash can only be used when the password is for MSCHAPv2 or
+#	MSCHAP (EAP-MSCHAPv2, EAP-TTLS/MSCHAPv2, EAP-TTLS/MSCHAP, LEAP).
+#	EAP-PSK (128-bit PSK), EAP-PAX (128-bit PSK), and EAP-SAKE (256-bit
+#	PSK) is also configured using this field. For EAP-GPSK, this is a
+#	variable length PSK.
+# ca_cert: File path to CA certificate file (PEM/DER). This file can have one
+#	or more trusted CA certificates. If ca_cert and ca_path are not
+#	included, server certificate will not be verified. This is insecure and
+#	a trusted CA certificate should always be configured when using
+#	EAP-TLS/TTLS/PEAP. Full path should be used since working directory may
+#	change when wpa_supplicant is run in the background.
+#
+#	Alternatively, this can be used to only perform matching of the server
+#	certificate (SHA-256 hash of the DER encoded X.509 certificate). In
+#	this case, the possible CA certificates in the server certificate chain
+#	are ignored and only the server certificate is verified. This is
+#	configured with the following format:
+#	hash:://server/sha256/cert_hash_in_hex
+#	For example: "hash://server/sha256/
+#	5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a"
+#
+#	On Windows, trusted CA certificates can be loaded from the system
+#	certificate store by setting this to cert_store://<name>, e.g.,
+#	ca_cert="cert_store://CA" or ca_cert="cert_store://ROOT".
+#	Note that when running wpa_supplicant as an application, the user
+#	certificate store (My user account) is used, whereas computer store
+#	(Computer account) is used when running wpasvc as a service.
+# ca_path: Directory path for CA certificate files (PEM). This path may
+#	contain multiple CA certificates in OpenSSL format. Common use for this
+#	is to point to system trusted CA list which is often installed into
+#	directory like /etc/ssl/certs. If configured, these certificates are
+#	added to the list of trusted CAs. ca_cert may also be included in that
+#	case, but it is not required.
+# client_cert: File path to client certificate file (PEM/DER)
+#	Full path should be used since working directory may change when
+#	wpa_supplicant is run in the background.
+#	Alternatively, a named configuration blob can be used by setting this
+#	to blob://<blob name>.
+# private_key: File path to client private key file (PEM/DER/PFX)
+#	When PKCS#12/PFX file (.p12/.pfx) is used, client_cert should be
+#	commented out. Both the private key and certificate will be read from
+#	the PKCS#12 file in this case. Full path should be used since working
+#	directory may change when wpa_supplicant is run in the background.
+#	Windows certificate store can be used by leaving client_cert out and
+#	configuring private_key in one of the following formats:
+#	cert://substring_to_match
+#	hash://certificate_thumbprint_in_hex
+#	for example: private_key="hash://63093aa9c47f56ae88334c7b65a4"
+#	Note that when running wpa_supplicant as an application, the user
+#	certificate store (My user account) is used, whereas computer store
+#	(Computer account) is used when running wpasvc as a service.
+#	Alternatively, a named configuration blob can be used by setting this
+#	to blob://<blob name>.
+# private_key_passwd: Password for private key file (if left out, this will be
+#	asked through control interface)
+# dh_file: File path to DH/DSA parameters file (in PEM format)
+#	This is an optional configuration file for setting parameters for an
+#	ephemeral DH key exchange. In most cases, the default RSA
+#	authentication does not use this configuration. However, it is possible
+#	setup RSA to use ephemeral DH key exchange. In addition, ciphers with
+#	DSA keys always use ephemeral DH keys. This can be used to achieve
+#	forward secrecy. If the file is in DSA parameters format, it will be
+#	automatically converted into DH params.
+# subject_match: Substring to be matched against the subject of the
+#	authentication server certificate. If this string is set, the server
+#	sertificate is only accepted if it contains this string in the subject.
+#	The subject string is in following format:
+#	/C=US/ST=CA/L=San Francisco/CN=Test AS/emailAddress=as@example.com
+# altsubject_match: Semicolon separated string of entries to be matched against
+#	the alternative subject name of the authentication server certificate.
+#	If this string is set, the server sertificate is only accepted if it
+#	contains one of the entries in an alternative subject name extension.
+#	altSubjectName string is in following format: TYPE:VALUE
+#	Example: EMAIL:server@example.com
+#	Example: DNS:server.example.com;DNS:server2.example.com
+#	Following types are supported: EMAIL, DNS, URI
+# phase1: Phase1 (outer authentication, i.e., TLS tunnel) parameters
+#	(string with field-value pairs, e.g., "peapver=0" or
+#	"peapver=1 peaplabel=1")
+#	'peapver' can be used to force which PEAP version (0 or 1) is used.
+#	'peaplabel=1' can be used to force new label, "client PEAP encryption",
+#	to be used during key derivation when PEAPv1 or newer. Most existing
+#	PEAPv1 implementation seem to be using the old label, "client EAP
+#	encryption", and wpa_supplicant is now using that as the default value.
+#	Some servers, e.g., Radiator, may require peaplabel=1 configuration to
+#	interoperate with PEAPv1; see eap_testing.txt for more details.
+#	'peap_outer_success=0' can be used to terminate PEAP authentication on
+#	tunneled EAP-Success. This is required with some RADIUS servers that
+#	implement draft-josefsson-pppext-eap-tls-eap-05.txt (e.g.,
+#	Lucent NavisRadius v4.4.0 with PEAP in "IETF Draft 5" mode)
+#	include_tls_length=1 can be used to force wpa_supplicant to include
+#	TLS Message Length field in all TLS messages even if they are not
+#	fragmented.
+#	sim_min_num_chal=3 can be used to configure EAP-SIM to require three
+#	challenges (by default, it accepts 2 or 3)
+#	result_ind=1 can be used to enable EAP-SIM and EAP-AKA to use
+#	protected result indication.
+#	'crypto_binding' option can be used to control PEAPv0 cryptobinding
+#	behavior:
+#	 * 0 = do not use cryptobinding (default)
+#	 * 1 = use cryptobinding if server supports it
+#	 * 2 = require cryptobinding
+#	EAP-WSC (WPS) uses following options: pin=<Device Password> or
+#	pbc=1.
+# phase2: Phase2 (inner authentication with TLS tunnel) parameters
+#	(string with field-value pairs, e.g., "auth=MSCHAPV2" for EAP-PEAP or
+#	"autheap=MSCHAPV2 autheap=MD5" for EAP-TTLS)
+# Following certificate/private key fields are used in inner Phase2
+# authentication when using EAP-TTLS or EAP-PEAP.
+# ca_cert2: File path to CA certificate file. This file can have one or more
+#	trusted CA certificates. If ca_cert2 and ca_path2 are not included,
+#	server certificate will not be verified. This is insecure and a trusted
+#	CA certificate should always be configured.
+# ca_path2: Directory path for CA certificate files (PEM)
+# client_cert2: File path to client certificate file
+# private_key2: File path to client private key file
+# private_key2_passwd: Password for private key file
+# dh_file2: File path to DH/DSA parameters file (in PEM format)
+# subject_match2: Substring to be matched against the subject of the
+#	authentication server certificate.
+# altsubject_match2: Substring to be matched against the alternative subject
+#	name of the authentication server certificate.
+#
+# fragment_size: Maximum EAP fragment size in bytes (default 1398).
+#	This value limits the fragment size for EAP methods that support
+#	fragmentation (e.g., EAP-TLS and EAP-PEAP). This value should be set
+#	small enough to make the EAP messages fit in MTU of the network
+#	interface used for EAPOL. The default value is suitable for most
+#	cases.
+#
+# EAP-FAST variables:
+# pac_file: File path for the PAC entries. wpa_supplicant will need to be able
+#	to create this file and write updates to it when PAC is being
+#	provisioned or refreshed. Full path to the file should be used since
+#	working directory may change when wpa_supplicant is run in the
+#	background. Alternatively, a named configuration blob can be used by
+#	setting this to blob://<blob name>
+# phase1: fast_provisioning option can be used to enable in-line provisioning
+#         of EAP-FAST credentials (PAC):
+#         0 = disabled,
+#         1 = allow unauthenticated provisioning,
+#         2 = allow authenticated provisioning,
+#         3 = allow both unauthenticated and authenticated provisioning
+#	fast_max_pac_list_len=<num> option can be used to set the maximum
+#		number of PAC entries to store in a PAC list (default: 10)
+#	fast_pac_format=binary option can be used to select binary format for
+#		storing PAC entries in order to save some space (the default
+#		text format uses about 2.5 times the size of minimal binary
+#		format)
+#
+# wpa_supplicant supports number of "EAP workarounds" to work around
+# interoperability issues with incorrectly behaving authentication servers.
+# These are enabled by default because some of the issues are present in large
+# number of authentication servers. Strict EAP conformance mode can be
+# configured by disabling workarounds with eap_workaround=0.
+
+# Example blocks:
+
+# Simple case: WPA-PSK, PSK as an ASCII passphrase, allow all valid ciphers
+network={
+	ssid="simple"
+	psk="very secret passphrase"
+	priority=5
+}
+
+# Same as previous, but request SSID-specific scanning (for APs that reject
+# broadcast SSID)
+network={
+	ssid="second ssid"
+	scan_ssid=1
+	psk="very secret passphrase"
+	priority=2
+}
+
+# Only WPA-PSK is used. Any valid cipher combination is accepted.
+network={
+	ssid="example"
+	proto=WPA
+	key_mgmt=WPA-PSK
+	pairwise=CCMP TKIP
+	group=CCMP TKIP WEP104 WEP40
+	psk=06b4be19da289f475aa46a33cb793029d4ab3db7a23ee92382eb0106c72ac7bb
+	priority=2
+}
+
+# WPA-Personal(PSK) with TKIP and enforcement for frequent PTK rekeying
+network={
+	ssid="example"
+	proto=WPA
+	key_mgmt=WPA-PSK
+	pairwise=TKIP
+	group=TKIP
+	psk="not so secure passphrase"
+	wpa_ptk_rekey=600
+}
+
+# Only WPA-EAP is used. Both CCMP and TKIP is accepted. An AP that used WEP104
+# or WEP40 as the group cipher will not be accepted.
+network={
+	ssid="example"
+	proto=RSN
+	key_mgmt=WPA-EAP
+	pairwise=CCMP TKIP
+	group=CCMP TKIP
+	eap=TLS
+	identity="user@example.com"
+	ca_cert="/etc/cert/ca.pem"
+	client_cert="/etc/cert/user.pem"
+	private_key="/etc/cert/user.prv"
+	private_key_passwd="password"
+	priority=1
+}
+
+# EAP-PEAP/MSCHAPv2 configuration for RADIUS servers that use the new peaplabel
+# (e.g., Radiator)
+network={
+	ssid="example"
+	key_mgmt=WPA-EAP
+	eap=PEAP
+	identity="user@example.com"
+	password="foobar"
+	ca_cert="/etc/cert/ca.pem"
+	phase1="peaplabel=1"
+	phase2="auth=MSCHAPV2"
+	priority=10
+}
+
+# EAP-TTLS/EAP-MD5-Challenge configuration with anonymous identity for the
+# unencrypted use. Real identity is sent only within an encrypted TLS tunnel.
+network={
+	ssid="example"
+	key_mgmt=WPA-EAP
+	eap=TTLS
+	identity="user@example.com"
+	anonymous_identity="anonymous@example.com"
+	password="foobar"
+	ca_cert="/etc/cert/ca.pem"
+	priority=2
+}
+
+# EAP-TTLS/MSCHAPv2 configuration with anonymous identity for the unencrypted
+# use. Real identity is sent only within an encrypted TLS tunnel.
+network={
+	ssid="example"
+	key_mgmt=WPA-EAP
+	eap=TTLS
+	identity="user@example.com"
+	anonymous_identity="anonymous@example.com"
+	password="foobar"
+	ca_cert="/etc/cert/ca.pem"
+	phase2="auth=MSCHAPV2"
+}
+
+# WPA-EAP, EAP-TTLS with different CA certificate used for outer and inner
+# authentication.
+network={
+	ssid="example"
+	key_mgmt=WPA-EAP
+	eap=TTLS
+	# Phase1 / outer authentication
+	anonymous_identity="anonymous@example.com"
+	ca_cert="/etc/cert/ca.pem"
+	# Phase 2 / inner authentication
+	phase2="autheap=TLS"
+	ca_cert2="/etc/cert/ca2.pem"
+	client_cert2="/etc/cer/user.pem"
+	private_key2="/etc/cer/user.prv"
+	private_key2_passwd="password"
+	priority=2
+}
+
+# Both WPA-PSK and WPA-EAP is accepted. Only CCMP is accepted as pairwise and
+# group cipher.
+network={
+	ssid="example"
+	bssid=00:11:22:33:44:55
+	proto=WPA RSN
+	key_mgmt=WPA-PSK WPA-EAP
+	pairwise=CCMP
+	group=CCMP
+	psk=06b4be19da289f475aa46a33cb793029d4ab3db7a23ee92382eb0106c72ac7bb
+}
+
+# Special characters in SSID, so use hex string. Default to WPA-PSK, WPA-EAP
+# and all valid ciphers.
+network={
+	ssid=00010203
+	psk=000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1d1e1f
+}
+
+
+# EAP-SIM with a GSM SIM or USIM
+network={
+	ssid="eap-sim-test"
+	key_mgmt=WPA-EAP
+	eap=SIM
+	pin="1234"
+	pcsc=""
+}
+
+
+# EAP-PSK
+network={
+	ssid="eap-psk-test"
+	key_mgmt=WPA-EAP
+	eap=PSK
+	anonymous_identity="eap_psk_user"
+	password=06b4be19da289f475aa46a33cb793029
+	identity="eap_psk_user@example.com"
+}
+
+
+# IEEE 802.1X/EAPOL with dynamically generated WEP keys (i.e., no WPA) using
+# EAP-TLS for authentication and key generation; require both unicast and
+# broadcast WEP keys.
+network={
+	ssid="1x-test"
+	key_mgmt=IEEE8021X
+	eap=TLS
+	identity="user@example.com"
+	ca_cert="/etc/cert/ca.pem"
+	client_cert="/etc/cert/user.pem"
+	private_key="/etc/cert/user.prv"
+	private_key_passwd="password"
+	eapol_flags=3
+}
+
+
+# LEAP with dynamic WEP keys
+network={
+	ssid="leap-example"
+	key_mgmt=IEEE8021X
+	eap=LEAP
+	identity="user"
+	password="foobar"
+}
+
+# EAP-IKEv2 using shared secrets for both server and peer authentication
+network={
+	ssid="ikev2-example"
+	key_mgmt=WPA-EAP
+	eap=IKEV2
+	identity="user"
+	password="foobar"
+}
+
+# EAP-FAST with WPA (WPA or WPA2)
+network={
+	ssid="eap-fast-test"
+	key_mgmt=WPA-EAP
+	eap=FAST
+	anonymous_identity="FAST-000102030405"
+	identity="username"
+	password="password"
+	phase1="fast_provisioning=1"
+	pac_file="/etc/wpa_supplicant.eap-fast-pac"
+}
+
+network={
+	ssid="eap-fast-test"
+	key_mgmt=WPA-EAP
+	eap=FAST
+	anonymous_identity="FAST-000102030405"
+	identity="username"
+	password="password"
+	phase1="fast_provisioning=1"
+	pac_file="blob://eap-fast-pac"
+}
+
+# Plaintext connection (no WPA, no IEEE 802.1X)
+network={
+	ssid="plaintext-test"
+	key_mgmt=NONE
+}
+
+
+# Shared WEP key connection (no WPA, no IEEE 802.1X)
+network={
+	ssid="static-wep-test"
+	key_mgmt=NONE
+	wep_key0="abcde"
+	wep_key1=0102030405
+	wep_key2="1234567890123"
+	wep_tx_keyidx=0
+	priority=5
+}
+
+
+# Shared WEP key connection (no WPA, no IEEE 802.1X) using Shared Key
+# IEEE 802.11 authentication
+network={
+	ssid="static-wep-test2"
+	key_mgmt=NONE
+	wep_key0="abcde"
+	wep_key1=0102030405
+	wep_key2="1234567890123"
+	wep_tx_keyidx=0
+	priority=5
+	auth_alg=SHARED
+}
+
+
+# IBSS/ad-hoc network with WPA-None/TKIP.
+network={
+	ssid="test adhoc"
+	mode=1
+	frequency=2412
+	proto=WPA
+	key_mgmt=WPA-NONE
+	pairwise=NONE
+	group=TKIP
+	psk="secret passphrase"
+}
+
+
+# Catch all example that allows more or less all configuration modes
+network={
+	ssid="example"
+	scan_ssid=1
+	key_mgmt=WPA-EAP WPA-PSK IEEE8021X NONE
+	pairwise=CCMP TKIP
+	group=CCMP TKIP WEP104 WEP40
+	psk="very secret passphrase"
+	eap=TTLS PEAP TLS
+	identity="user@example.com"
+	password="foobar"
+	ca_cert="/etc/cert/ca.pem"
+	client_cert="/etc/cert/user.pem"
+	private_key="/etc/cert/user.prv"
+	private_key_passwd="password"
+	phase1="peaplabel=0"
+}
+
+# Example of EAP-TLS with smartcard (openssl engine)
+network={
+	ssid="example"
+	key_mgmt=WPA-EAP
+	eap=TLS
+	proto=RSN
+	pairwise=CCMP TKIP
+	group=CCMP TKIP
+	identity="user@example.com"
+	ca_cert="/etc/cert/ca.pem"
+	client_cert="/etc/cert/user.pem"
+
+	engine=1
+
+	# The engine configured here must be available. Look at
+	# OpenSSL engine support in the global section.
+	# The key available through the engine must be the private key
+	# matching the client certificate configured above.
+
+	# use the opensc engine
+	#engine_id="opensc"
+	#key_id="45"
+
+	# use the pkcs11 engine
+	engine_id="pkcs11"
+	key_id="id_45"
+
+	# Optional PIN configuration; this can be left out and PIN will be
+	# asked through the control interface
+	pin="1234"
+}
+
+# Example configuration showing how to use an inlined blob as a CA certificate
+# data instead of using external file
+network={
+	ssid="example"
+	key_mgmt=WPA-EAP
+	eap=TTLS
+	identity="user@example.com"
+	anonymous_identity="anonymous@example.com"
+	password="foobar"
+	ca_cert="blob://exampleblob"
+	priority=20
+}
+
+blob-base64-exampleblob={
+SGVsbG8gV29ybGQhCg==
+}
+
+
+# Wildcard match for SSID (plaintext APs only). This example select any
+# open AP regardless of its SSID.
+network={
+	key_mgmt=NONE
+}
diff --git a/wpa_supplicant/wpa_supplicant.conf.orig b/wpa_supplicant/wpa_supplicant.conf.orig
deleted file mode 100644
index b0157446..00000000
--- a/wpa_supplicant/wpa_supplicant.conf.orig
+++ /dev/null
@@ -1,892 +0,0 @@
-##### Example wpa_supplicant configuration file ###############################
-#
-# This file describes configuration file format and lists all available option.
-# Please also take a look at simpler configuration examples in 'examples'
-# subdirectory.
-#
-# Empty lines and lines starting with # are ignored
-
-# NOTE! This file may contain password information and should probably be made
-# readable only by root user on multiuser systems.
-
-# Note: All file paths in this configuration file should use full (absolute,
-# not relative to working directory) path in order to allow working directory
-# to be changed. This can happen if wpa_supplicant is run in the background.
-
-# Whether to allow wpa_supplicant to update (overwrite) configuration
-#
-# This option can be used to allow wpa_supplicant to overwrite configuration
-# file whenever configuration is changed (e.g., new network block is added with
-# wpa_cli or wpa_gui, or a password is changed). This is required for
-# wpa_cli/wpa_gui to be able to store the configuration changes permanently.
-# Please note that overwriting configuration file will remove the comments from
-# it.
-#update_config=1
-
-# global configuration (shared by all network blocks)
-#
-# Parameters for the control interface. If this is specified, wpa_supplicant
-# will open a control interface that is available for external programs to
-# manage wpa_supplicant. The meaning of this string depends on which control
-# interface mechanism is used. For all cases, the existance of this parameter
-# in configuration is used to determine whether the control interface is
-# enabled.
-#
-# For UNIX domain sockets (default on Linux and BSD): This is a directory that
-# will be created for UNIX domain sockets for listening to requests from
-# external programs (CLI/GUI, etc.) for status information and configuration.
-# The socket file will be named based on the interface name, so multiple
-# wpa_supplicant processes can be run at the same time if more than one
-# interface is used.
-# /var/run/wpa_supplicant is the recommended directory for sockets and by
-# default, wpa_cli will use it when trying to connect with wpa_supplicant.
-#
-# Access control for the control interface can be configured by setting the
-# directory to allow only members of a group to use sockets. This way, it is
-# possible to run wpa_supplicant as root (since it needs to change network
-# configuration and open raw sockets) and still allow GUI/CLI components to be
-# run as non-root users. However, since the control interface can be used to
-# change the network configuration, this access needs to be protected in many
-# cases. By default, wpa_supplicant is configured to use gid 0 (root). If you
-# want to allow non-root users to use the control interface, add a new group
-# and change this value to match with that group. Add users that should have
-# control interface access to this group. If this variable is commented out or
-# not included in the configuration file, group will not be changed from the
-# value it got by default when the directory or socket was created.
-#
-# When configuring both the directory and group, use following format:
-# DIR=/var/run/wpa_supplicant GROUP=wheel
-# DIR=/var/run/wpa_supplicant GROUP=0
-# (group can be either group name or gid)
-#
-# For UDP connections (default on Windows): The value will be ignored. This
-# variable is just used to select that the control interface is to be created.
-# The value can be set to, e.g., udp (ctrl_interface=udp)
-#
-# For Windows Named Pipe: This value can be used to set the security descriptor
-# for controlling access to the control interface. Security descriptor can be
-# set using Security Descriptor String Format (see http://msdn.microsoft.com/
-# library/default.asp?url=/library/en-us/secauthz/security/
-# security_descriptor_string_format.asp). The descriptor string needs to be
-# prefixed with SDDL=. For example, ctrl_interface=SDDL=D: would set an empty
-# DACL (which will reject all connections). See README-Windows.txt for more
-# information about SDDL string format.
-#
-ctrl_interface=/var/run/wpa_supplicant
-
-# IEEE 802.1X/EAPOL version
-# wpa_supplicant is implemented based on IEEE Std 802.1X-2004 which defines
-# EAPOL version 2. However, there are many APs that do not handle the new
-# version number correctly (they seem to drop the frames completely). In order
-# to make wpa_supplicant interoperate with these APs, the version number is set
-# to 1 by default. This configuration value can be used to set it to the new
-# version (2).
-eapol_version=1
-
-# AP scanning/selection
-# By default, wpa_supplicant requests driver to perform AP scanning and then
-# uses the scan results to select a suitable AP. Another alternative is to
-# allow the driver to take care of AP scanning and selection and use
-# wpa_supplicant just to process EAPOL frames based on IEEE 802.11 association
-# information from the driver.
-# 1: wpa_supplicant initiates scanning and AP selection; if no APs matching to
-#    the currently enabled networks are found, a new network (IBSS or AP mode
-#    operation) may be initialized (if configured) (default)
-# 0: driver takes care of scanning, AP selection, and IEEE 802.11 association
-#    parameters (e.g., WPA IE generation); this mode can also be used with
-#    non-WPA drivers when using IEEE 802.1X mode; do not try to associate with
-#    APs (i.e., external program needs to control association). This mode must
-#    also be used when using wired Ethernet drivers.
-# 2: like 0, but associate with APs using security policy and SSID (but not
-#    BSSID); this can be used, e.g., with ndiswrapper and NDIS drivers to
-#    enable operation with hidden SSIDs and optimized roaming; in this mode,
-#    the network blocks in the configuration file are tried one by one until
-#    the driver reports successful association; each network block should have
-#    explicit security policy (i.e., only one option in the lists) for
-#    key_mgmt, pairwise, group, proto variables
-# When using IBSS or AP mode, ap_scan=2 mode can force the new network to be
-# created immediately regardless of scan results. ap_scan=1 mode will first try
-# to scan for existing networks and only if no matches with the enabled
-# networks are found, a new IBSS or AP mode network is created.
-ap_scan=1
-
-# EAP fast re-authentication
-# By default, fast re-authentication is enabled for all EAP methods that
-# support it. This variable can be used to disable fast re-authentication.
-# Normally, there is no need to disable this.
-fast_reauth=1
-
-# OpenSSL Engine support
-# These options can be used to load OpenSSL engines.
-# The two engines that are supported currently are shown below:
-# They are both from the opensc project (http://www.opensc.org/)
-# By default no engines are loaded.
-# make the opensc engine available
-#opensc_engine_path=/usr/lib/opensc/engine_opensc.so
-# make the pkcs11 engine available
-#pkcs11_engine_path=/usr/lib/opensc/engine_pkcs11.so
-# configure the path to the pkcs11 module required by the pkcs11 engine
-#pkcs11_module_path=/usr/lib/pkcs11/opensc-pkcs11.so
-
-# Dynamic EAP methods
-# If EAP methods were built dynamically as shared object files, they need to be
-# loaded here before being used in the network blocks. By default, EAP methods
-# are included statically in the build, so these lines are not needed
-#load_dynamic_eap=/usr/lib/wpa_supplicant/eap_tls.so
-#load_dynamic_eap=/usr/lib/wpa_supplicant/eap_md5.so
-
-# Driver interface parameters
-# This field can be used to configure arbitrary driver interace parameters. The
-# format is specific to the selected driver interface. This field is not used
-# in most cases.
-#driver_param="field=value"
-
-# Country code
-# The ISO/IEC alpha2 country code for the country in which this device is
-# currently operating.
-#country=US
-
-# Maximum lifetime for PMKSA in seconds; default 43200
-#dot11RSNAConfigPMKLifetime=43200
-# Threshold for reauthentication (percentage of PMK lifetime); default 70
-#dot11RSNAConfigPMKReauthThreshold=70
-# Timeout for security association negotiation in seconds; default 60
-#dot11RSNAConfigSATimeout=60
-
-# Wi-Fi Protected Setup (WPS) parameters
-
-# Universally Unique IDentifier (UUID; see RFC 4122) of the device
-# If not configured, UUID will be generated based on the local MAC address.
-#uuid=12345678-9abc-def0-1234-56789abcdef0
-
-# Device Name
-# User-friendly description of device; up to 32 octets encoded in UTF-8
-#device_name=Wireless Client
-
-# Manufacturer
-# The manufacturer of the device (up to 64 ASCII characters)
-#manufacturer=Company
-
-# Model Name
-# Model of the device (up to 32 ASCII characters)
-#model_name=cmodel
-
-# Model Number
-# Additional device description (up to 32 ASCII characters)
-#model_number=123
-
-# Serial Number
-# Serial number of the device (up to 32 characters)
-#serial_number=12345
-
-# Primary Device Type
-# Used format: <categ>-<OUI>-<subcateg>
-# categ = Category as an integer value
-# OUI = OUI and type octet as a 4-octet hex-encoded value; 0050F204 for
-#       default WPS OUI
-# subcateg = OUI-specific Sub Category as an integer value
-# Examples:
-#   1-0050F204-1 (Computer / PC)
-#   1-0050F204-2 (Computer / Server)
-#   5-0050F204-1 (Storage / NAS)
-#   6-0050F204-1 (Network Infrastructure / AP)
-#device_type=1-0050F204-1
-
-# OS Version
-# 4-octet operating system version number (hex string)
-#os_version=01020300
-
-# Config Methods
-# List of the supported configuration methods
-# Available methods: usba ethernet label display ext_nfc_token int_nfc_token
-#	nfc_interface push_button keypad virtual_display physical_display
-#	virtual_push_button physical_push_button
-# For WSC 1.0:
-#config_methods=label display push_button keypad
-# For WSC 2.0:
-#config_methods=label virtual_display virtual_push_button keypad
-
-# Credential processing
-#   0 = process received credentials internally (default)
-#   1 = do not process received credentials; just pass them over ctrl_iface to
-#	external program(s)
-#   2 = process received credentials internally and pass them over ctrl_iface
-#	to external program(s)
-#wps_cred_processing=0
-
-# Maximum number of BSS entries to keep in memory
-# Default: 200
-# This can be used to limit memory use on the BSS entries (cached scan
-# results). A larger value may be needed in environments that have huge number
-# of APs when using ap_scan=1 mode.
-#bss_max_count=200
-
-
-# filter_ssids - SSID-based scan result filtering
-# 0 = do not filter scan results (default)
-# 1 = only include configured SSIDs in scan results/BSS table
-#filter_ssids=0
-
-
-# network block
-#
-# Each network (usually AP's sharing the same SSID) is configured as a separate
-# block in this configuration file. The network blocks are in preference order
-# (the first match is used).
-#
-# network block fields:
-#
-# disabled:
-#	0 = this network can be used (default)
-#	1 = this network block is disabled (can be enabled through ctrl_iface,
-#	    e.g., with wpa_cli or wpa_gui)
-#
-# id_str: Network identifier string for external scripts. This value is passed
-#	to external action script through wpa_cli as WPA_ID_STR environment
-#	variable to make it easier to do network specific configuration.
-#
-# ssid: SSID (mandatory); either as an ASCII string with double quotation or
-#	as hex string; network name
-#
-# scan_ssid:
-#	0 = do not scan this SSID with specific Probe Request frames (default)
-#	1 = scan with SSID-specific Probe Request frames (this can be used to
-#	    find APs that do not accept broadcast SSID or use multiple SSIDs;
-#	    this will add latency to scanning, so enable this only when needed)
-#
-# bssid: BSSID (optional); if set, this network block is used only when
-#	associating with the AP using the configured BSSID
-#
-# priority: priority group (integer)
-# By default, all networks will get same priority group (0). If some of the
-# networks are more desirable, this field can be used to change the order in
-# which wpa_supplicant goes through the networks when selecting a BSS. The
-# priority groups will be iterated in decreasing priority (i.e., the larger the
-# priority value, the sooner the network is matched against the scan results).
-# Within each priority group, networks will be selected based on security
-# policy, signal strength, etc.
-# Please note that AP scanning with scan_ssid=1 and ap_scan=2 mode are not
-# using this priority to select the order for scanning. Instead, they try the
-# networks in the order that used in the configuration file.
-#
-# mode: IEEE 802.11 operation mode
-# 0 = infrastructure (Managed) mode, i.e., associate with an AP (default)
-# 1 = IBSS (ad-hoc, peer-to-peer)
-# 2 = AP (access point)
-# Note: IBSS can only be used with key_mgmt NONE (plaintext and static WEP)
-# and key_mgmt=WPA-NONE (fixed group key TKIP/CCMP). WPA-None requires
-# following network block options:
-# proto=WPA, key_mgmt=WPA-NONE, pairwise=NONE, group=TKIP (or CCMP, but not
-# both), and psk must also be set.
-#
-# frequency: Channel frequency in megahertz (MHz) for IBSS, e.g.,
-# 2412 = IEEE 802.11b/g channel 1. This value is used to configure the initial
-# channel for IBSS (adhoc) networks. It is ignored in the infrastructure mode.
-# In addition, this value is only used by the station that creates the IBSS. If
-# an IBSS network with the configured SSID is already present, the frequency of
-# the network will be used instead of this configured value.
-#
-# scan_freq: List of frequencies to scan
-# Space-separated list of frequencies in MHz to scan when searching for this
-# BSS. If the subset of channels used by the network is known, this option can
-# be used to optimize scanning to not occur on channels that the network does
-# not use. Example: scan_freq=2412 2437 2462
-#
-# freq_list: Array of allowed frequencies
-# Space-separated list of frequencies in MHz to allow for selecting the BSS. If
-# set, scan results that do not match any of the specified frequencies are not
-# considered when selecting a BSS.
-#
-# proto: list of accepted protocols
-# WPA = WPA/IEEE 802.11i/D3.0
-# RSN = WPA2/IEEE 802.11i (also WPA2 can be used as an alias for RSN)
-# If not set, this defaults to: WPA RSN
-#
-# key_mgmt: list of accepted authenticated key management protocols
-# WPA-PSK = WPA pre-shared key (this requires 'psk' field)
-# WPA-EAP = WPA using EAP authentication
-# IEEE8021X = IEEE 802.1X using EAP authentication and (optionally) dynamically
-#	generated WEP keys
-# NONE = WPA is not used; plaintext or static WEP could be used
-# WPA-PSK-SHA256 = Like WPA-PSK but using stronger SHA256-based algorithms
-# WPA-EAP-SHA256 = Like WPA-EAP but using stronger SHA256-based algorithms
-# If not set, this defaults to: WPA-PSK WPA-EAP
-#
-# auth_alg: list of allowed IEEE 802.11 authentication algorithms
-# OPEN = Open System authentication (required for WPA/WPA2)
-# SHARED = Shared Key authentication (requires static WEP keys)
-# LEAP = LEAP/Network EAP (only used with LEAP)
-# If not set, automatic selection is used (Open System with LEAP enabled if
-# LEAP is allowed as one of the EAP methods).
-#
-# pairwise: list of accepted pairwise (unicast) ciphers for WPA
-# CCMP = AES in Counter mode with CBC-MAC [RFC 3610, IEEE 802.11i/D7.0]
-# TKIP = Temporal Key Integrity Protocol [IEEE 802.11i/D7.0]
-# NONE = Use only Group Keys (deprecated, should not be included if APs support
-#	pairwise keys)
-# If not set, this defaults to: CCMP TKIP
-#
-# group: list of accepted group (broadcast/multicast) ciphers for WPA
-# CCMP = AES in Counter mode with CBC-MAC [RFC 3610, IEEE 802.11i/D7.0]
-# TKIP = Temporal Key Integrity Protocol [IEEE 802.11i/D7.0]
-# WEP104 = WEP (Wired Equivalent Privacy) with 104-bit key
-# WEP40 = WEP (Wired Equivalent Privacy) with 40-bit key [IEEE 802.11]
-# If not set, this defaults to: CCMP TKIP WEP104 WEP40
-#
-# psk: WPA preshared key; 256-bit pre-shared key
-# The key used in WPA-PSK mode can be entered either as 64 hex-digits, i.e.,
-# 32 bytes or as an ASCII passphrase (in which case, the real PSK will be
-# generated using the passphrase and SSID). ASCII passphrase must be between
-# 8 and 63 characters (inclusive).
-# This field is not needed, if WPA-EAP is used.
-# Note: Separate tool, wpa_passphrase, can be used to generate 256-bit keys
-# from ASCII passphrase. This process uses lot of CPU and wpa_supplicant
-# startup and reconfiguration time can be optimized by generating the PSK only
-# only when the passphrase or SSID has actually changed.
-#
-# eapol_flags: IEEE 802.1X/EAPOL options (bit field)
-# Dynamic WEP key required for non-WPA mode
-# bit0 (1): require dynamically generated unicast WEP key
-# bit1 (2): require dynamically generated broadcast WEP key
-# 	(3 = require both keys; default)
-# Note: When using wired authentication, eapol_flags must be set to 0 for the
-# authentication to be completed successfully.
-#
-# mixed_cell: This option can be used to configure whether so called mixed
-# cells, i.e., networks that use both plaintext and encryption in the same
-# SSID, are allowed when selecting a BSS form scan results.
-# 0 = disabled (default)
-# 1 = enabled
-#
-# proactive_key_caching:
-# Enable/disable opportunistic PMKSA caching for WPA2.
-# 0 = disabled (default)
-# 1 = enabled
-#
-# wep_key0..3: Static WEP key (ASCII in double quotation, e.g. "abcde" or
-# hex without quotation, e.g., 0102030405)
-# wep_tx_keyidx: Default WEP key index (TX) (0..3)
-#
-# peerkey: Whether PeerKey negotiation for direct links (IEEE 802.11e DLS) is
-# allowed. This is only used with RSN/WPA2.
-# 0 = disabled (default)
-# 1 = enabled
-#peerkey=1
-#
-# wpa_ptk_rekey: Maximum lifetime for PTK in seconds. This can be used to
-# enforce rekeying of PTK to mitigate some attacks against TKIP deficiencies.
-#
-# Following fields are only used with internal EAP implementation.
-# eap: space-separated list of accepted EAP methods
-#	MD5 = EAP-MD5 (unsecure and does not generate keying material ->
-#			cannot be used with WPA; to be used as a Phase 2 method
-#			with EAP-PEAP or EAP-TTLS)
-#       MSCHAPV2 = EAP-MSCHAPv2 (cannot be used separately with WPA; to be used
-#		as a Phase 2 method with EAP-PEAP or EAP-TTLS)
-#       OTP = EAP-OTP (cannot be used separately with WPA; to be used
-#		as a Phase 2 method with EAP-PEAP or EAP-TTLS)
-#       GTC = EAP-GTC (cannot be used separately with WPA; to be used
-#		as a Phase 2 method with EAP-PEAP or EAP-TTLS)
-#	TLS = EAP-TLS (client and server certificate)
-#	PEAP = EAP-PEAP (with tunnelled EAP authentication)
-#	TTLS = EAP-TTLS (with tunnelled EAP or PAP/CHAP/MSCHAP/MSCHAPV2
-#			 authentication)
-#	If not set, all compiled in methods are allowed.
-#
-# identity: Identity string for EAP
-#	This field is also used to configure user NAI for
-#	EAP-PSK/PAX/SAKE/GPSK.
-# anonymous_identity: Anonymous identity string for EAP (to be used as the
-#	unencrypted identity with EAP types that support different tunnelled
-#	identity, e.g., EAP-TTLS)
-# password: Password string for EAP. This field can include either the
-#	plaintext password (using ASCII or hex string) or a NtPasswordHash
-#	(16-byte MD4 hash of password) in hash:<32 hex digits> format.
-#	NtPasswordHash can only be used when the password is for MSCHAPv2 or
-#	MSCHAP (EAP-MSCHAPv2, EAP-TTLS/MSCHAPv2, EAP-TTLS/MSCHAP, LEAP).
-#	EAP-PSK (128-bit PSK), EAP-PAX (128-bit PSK), and EAP-SAKE (256-bit
-#	PSK) is also configured using this field. For EAP-GPSK, this is a
-#	variable length PSK.
-# ca_cert: File path to CA certificate file (PEM/DER). This file can have one
-#	or more trusted CA certificates. If ca_cert and ca_path are not
-#	included, server certificate will not be verified. This is insecure and
-#	a trusted CA certificate should always be configured when using
-#	EAP-TLS/TTLS/PEAP. Full path should be used since working directory may
-#	change when wpa_supplicant is run in the background.
-#
-#	Alternatively, this can be used to only perform matching of the server
-#	certificate (SHA-256 hash of the DER encoded X.509 certificate). In
-#	this case, the possible CA certificates in the server certificate chain
-#	are ignored and only the server certificate is verified. This is
-#	configured with the following format:
-#	hash:://server/sha256/cert_hash_in_hex
-#	For example: "hash://server/sha256/
-#	5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a"
-#
-#	On Windows, trusted CA certificates can be loaded from the system
-#	certificate store by setting this to cert_store://<name>, e.g.,
-#	ca_cert="cert_store://CA" or ca_cert="cert_store://ROOT".
-#	Note that when running wpa_supplicant as an application, the user
-#	certificate store (My user account) is used, whereas computer store
-#	(Computer account) is used when running wpasvc as a service.
-# ca_path: Directory path for CA certificate files (PEM). This path may
-#	contain multiple CA certificates in OpenSSL format. Common use for this
-#	is to point to system trusted CA list which is often installed into
-#	directory like /etc/ssl/certs. If configured, these certificates are
-#	added to the list of trusted CAs. ca_cert may also be included in that
-#	case, but it is not required.
-# client_cert: File path to client certificate file (PEM/DER)
-#	Full path should be used since working directory may change when
-#	wpa_supplicant is run in the background.
-#	Alternatively, a named configuration blob can be used by setting this
-#	to blob://<blob name>.
-# private_key: File path to client private key file (PEM/DER/PFX)
-#	When PKCS#12/PFX file (.p12/.pfx) is used, client_cert should be
-#	commented out. Both the private key and certificate will be read from
-#	the PKCS#12 file in this case. Full path should be used since working
-#	directory may change when wpa_supplicant is run in the background.
-#	Windows certificate store can be used by leaving client_cert out and
-#	configuring private_key in one of the following formats:
-#	cert://substring_to_match
-#	hash://certificate_thumbprint_in_hex
-#	for example: private_key="hash://63093aa9c47f56ae88334c7b65a4"
-#	Note that when running wpa_supplicant as an application, the user
-#	certificate store (My user account) is used, whereas computer store
-#	(Computer account) is used when running wpasvc as a service.
-#	Alternatively, a named configuration blob can be used by setting this
-#	to blob://<blob name>.
-# private_key_passwd: Password for private key file (if left out, this will be
-#	asked through control interface)
-# dh_file: File path to DH/DSA parameters file (in PEM format)
-#	This is an optional configuration file for setting parameters for an
-#	ephemeral DH key exchange. In most cases, the default RSA
-#	authentication does not use this configuration. However, it is possible
-#	setup RSA to use ephemeral DH key exchange. In addition, ciphers with
-#	DSA keys always use ephemeral DH keys. This can be used to achieve
-#	forward secrecy. If the file is in DSA parameters format, it will be
-#	automatically converted into DH params.
-# subject_match: Substring to be matched against the subject of the
-#	authentication server certificate. If this string is set, the server
-#	sertificate is only accepted if it contains this string in the subject.
-#	The subject string is in following format:
-#	/C=US/ST=CA/L=San Francisco/CN=Test AS/emailAddress=as@example.com
-# altsubject_match: Semicolon separated string of entries to be matched against
-#	the alternative subject name of the authentication server certificate.
-#	If this string is set, the server sertificate is only accepted if it
-#	contains one of the entries in an alternative subject name extension.
-#	altSubjectName string is in following format: TYPE:VALUE
-#	Example: EMAIL:server@example.com
-#	Example: DNS:server.example.com;DNS:server2.example.com
-#	Following types are supported: EMAIL, DNS, URI
-# phase1: Phase1 (outer authentication, i.e., TLS tunnel) parameters
-#	(string with field-value pairs, e.g., "peapver=0" or
-#	"peapver=1 peaplabel=1")
-#	'peapver' can be used to force which PEAP version (0 or 1) is used.
-#	'peaplabel=1' can be used to force new label, "client PEAP encryption",
-#	to be used during key derivation when PEAPv1 or newer. Most existing
-#	PEAPv1 implementation seem to be using the old label, "client EAP
-#	encryption", and wpa_supplicant is now using that as the default value.
-#	Some servers, e.g., Radiator, may require peaplabel=1 configuration to
-#	interoperate with PEAPv1; see eap_testing.txt for more details.
-#	'peap_outer_success=0' can be used to terminate PEAP authentication on
-#	tunneled EAP-Success. This is required with some RADIUS servers that
-#	implement draft-josefsson-pppext-eap-tls-eap-05.txt (e.g.,
-#	Lucent NavisRadius v4.4.0 with PEAP in "IETF Draft 5" mode)
-#	include_tls_length=1 can be used to force wpa_supplicant to include
-#	TLS Message Length field in all TLS messages even if they are not
-#	fragmented.
-#	sim_min_num_chal=3 can be used to configure EAP-SIM to require three
-#	challenges (by default, it accepts 2 or 3)
-#	result_ind=1 can be used to enable EAP-SIM and EAP-AKA to use
-#	protected result indication.
-#	'crypto_binding' option can be used to control PEAPv0 cryptobinding
-#	behavior:
-#	 * 0 = do not use cryptobinding (default)
-#	 * 1 = use cryptobinding if server supports it
-#	 * 2 = require cryptobinding
-#	EAP-WSC (WPS) uses following options: pin=<Device Password> or
-#	pbc=1.
-# phase2: Phase2 (inner authentication with TLS tunnel) parameters
-#	(string with field-value pairs, e.g., "auth=MSCHAPV2" for EAP-PEAP or
-#	"autheap=MSCHAPV2 autheap=MD5" for EAP-TTLS)
-# Following certificate/private key fields are used in inner Phase2
-# authentication when using EAP-TTLS or EAP-PEAP.
-# ca_cert2: File path to CA certificate file. This file can have one or more
-#	trusted CA certificates. If ca_cert2 and ca_path2 are not included,
-#	server certificate will not be verified. This is insecure and a trusted
-#	CA certificate should always be configured.
-# ca_path2: Directory path for CA certificate files (PEM)
-# client_cert2: File path to client certificate file
-# private_key2: File path to client private key file
-# private_key2_passwd: Password for private key file
-# dh_file2: File path to DH/DSA parameters file (in PEM format)
-# subject_match2: Substring to be matched against the subject of the
-#	authentication server certificate.
-# altsubject_match2: Substring to be matched against the alternative subject
-#	name of the authentication server certificate.
-#
-# fragment_size: Maximum EAP fragment size in bytes (default 1398).
-#	This value limits the fragment size for EAP methods that support
-#	fragmentation (e.g., EAP-TLS and EAP-PEAP). This value should be set
-#	small enough to make the EAP messages fit in MTU of the network
-#	interface used for EAPOL. The default value is suitable for most
-#	cases.
-#
-# EAP-FAST variables:
-# pac_file: File path for the PAC entries. wpa_supplicant will need to be able
-#	to create this file and write updates to it when PAC is being
-#	provisioned or refreshed. Full path to the file should be used since
-#	working directory may change when wpa_supplicant is run in the
-#	background. Alternatively, a named configuration blob can be used by
-#	setting this to blob://<blob name>
-# phase1: fast_provisioning option can be used to enable in-line provisioning
-#         of EAP-FAST credentials (PAC):
-#         0 = disabled,
-#         1 = allow unauthenticated provisioning,
-#         2 = allow authenticated provisioning,
-#         3 = allow both unauthenticated and authenticated provisioning
-#	fast_max_pac_list_len=<num> option can be used to set the maximum
-#		number of PAC entries to store in a PAC list (default: 10)
-#	fast_pac_format=binary option can be used to select binary format for
-#		storing PAC entries in order to save some space (the default
-#		text format uses about 2.5 times the size of minimal binary
-#		format)
-#
-# wpa_supplicant supports number of "EAP workarounds" to work around
-# interoperability issues with incorrectly behaving authentication servers.
-# These are enabled by default because some of the issues are present in large
-# number of authentication servers. Strict EAP conformance mode can be
-# configured by disabling workarounds with eap_workaround=0.
-
-# Example blocks:
-
-# Simple case: WPA-PSK, PSK as an ASCII passphrase, allow all valid ciphers
-network={
-	ssid="simple"
-	psk="very secret passphrase"
-	priority=5
-}
-
-# Same as previous, but request SSID-specific scanning (for APs that reject
-# broadcast SSID)
-network={
-	ssid="second ssid"
-	scan_ssid=1
-	psk="very secret passphrase"
-	priority=2
-}
-
-# Only WPA-PSK is used. Any valid cipher combination is accepted.
-network={
-	ssid="example"
-	proto=WPA
-	key_mgmt=WPA-PSK
-	pairwise=CCMP TKIP
-	group=CCMP TKIP WEP104 WEP40
-	psk=06b4be19da289f475aa46a33cb793029d4ab3db7a23ee92382eb0106c72ac7bb
-	priority=2
-}
-
-# WPA-Personal(PSK) with TKIP and enforcement for frequent PTK rekeying
-network={
-	ssid="example"
-	proto=WPA
-	key_mgmt=WPA-PSK
-	pairwise=TKIP
-	group=TKIP
-	psk="not so secure passphrase"
-	wpa_ptk_rekey=600
-}
-
-# Only WPA-EAP is used. Both CCMP and TKIP is accepted. An AP that used WEP104
-# or WEP40 as the group cipher will not be accepted.
-network={
-	ssid="example"
-	proto=RSN
-	key_mgmt=WPA-EAP
-	pairwise=CCMP TKIP
-	group=CCMP TKIP
-	eap=TLS
-	identity="user@example.com"
-	ca_cert="/etc/cert/ca.pem"
-	client_cert="/etc/cert/user.pem"
-	private_key="/etc/cert/user.prv"
-	private_key_passwd="password"
-	priority=1
-}
-
-# EAP-PEAP/MSCHAPv2 configuration for RADIUS servers that use the new peaplabel
-# (e.g., Radiator)
-network={
-	ssid="example"
-	key_mgmt=WPA-EAP
-	eap=PEAP
-	identity="user@example.com"
-	password="foobar"
-	ca_cert="/etc/cert/ca.pem"
-	phase1="peaplabel=1"
-	phase2="auth=MSCHAPV2"
-	priority=10
-}
-
-# EAP-TTLS/EAP-MD5-Challenge configuration with anonymous identity for the
-# unencrypted use. Real identity is sent only within an encrypted TLS tunnel.
-network={
-	ssid="example"
-	key_mgmt=WPA-EAP
-	eap=TTLS
-	identity="user@example.com"
-	anonymous_identity="anonymous@example.com"
-	password="foobar"
-	ca_cert="/etc/cert/ca.pem"
-	priority=2
-}
-
-# EAP-TTLS/MSCHAPv2 configuration with anonymous identity for the unencrypted
-# use. Real identity is sent only within an encrypted TLS tunnel.
-network={
-	ssid="example"
-	key_mgmt=WPA-EAP
-	eap=TTLS
-	identity="user@example.com"
-	anonymous_identity="anonymous@example.com"
-	password="foobar"
-	ca_cert="/etc/cert/ca.pem"
-	phase2="auth=MSCHAPV2"
-}
-
-# WPA-EAP, EAP-TTLS with different CA certificate used for outer and inner
-# authentication.
-network={
-	ssid="example"
-	key_mgmt=WPA-EAP
-	eap=TTLS
-	# Phase1 / outer authentication
-	anonymous_identity="anonymous@example.com"
-	ca_cert="/etc/cert/ca.pem"
-	# Phase 2 / inner authentication
-	phase2="autheap=TLS"
-	ca_cert2="/etc/cert/ca2.pem"
-	client_cert2="/etc/cer/user.pem"
-	private_key2="/etc/cer/user.prv"
-	private_key2_passwd="password"
-	priority=2
-}
-
-# Both WPA-PSK and WPA-EAP is accepted. Only CCMP is accepted as pairwise and
-# group cipher.
-network={
-	ssid="example"
-	bssid=00:11:22:33:44:55
-	proto=WPA RSN
-	key_mgmt=WPA-PSK WPA-EAP
-	pairwise=CCMP
-	group=CCMP
-	psk=06b4be19da289f475aa46a33cb793029d4ab3db7a23ee92382eb0106c72ac7bb
-}
-
-# Special characters in SSID, so use hex string. Default to WPA-PSK, WPA-EAP
-# and all valid ciphers.
-network={
-	ssid=00010203
-	psk=000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1d1e1f
-}
-
-
-# EAP-SIM with a GSM SIM or USIM
-network={
-	ssid="eap-sim-test"
-	key_mgmt=WPA-EAP
-	eap=SIM
-	pin="1234"
-	pcsc=""
-}
-
-
-# EAP-PSK
-network={
-	ssid="eap-psk-test"
-	key_mgmt=WPA-EAP
-	eap=PSK
-	anonymous_identity="eap_psk_user"
-	password=06b4be19da289f475aa46a33cb793029
-	identity="eap_psk_user@example.com"
-}
-
-
-# IEEE 802.1X/EAPOL with dynamically generated WEP keys (i.e., no WPA) using
-# EAP-TLS for authentication and key generation; require both unicast and
-# broadcast WEP keys.
-network={
-	ssid="1x-test"
-	key_mgmt=IEEE8021X
-	eap=TLS
-	identity="user@example.com"
-	ca_cert="/etc/cert/ca.pem"
-	client_cert="/etc/cert/user.pem"
-	private_key="/etc/cert/user.prv"
-	private_key_passwd="password"
-	eapol_flags=3
-}
-
-
-# LEAP with dynamic WEP keys
-network={
-	ssid="leap-example"
-	key_mgmt=IEEE8021X
-	eap=LEAP
-	identity="user"
-	password="foobar"
-}
-
-# EAP-IKEv2 using shared secrets for both server and peer authentication
-network={
-	ssid="ikev2-example"
-	key_mgmt=WPA-EAP
-	eap=IKEV2
-	identity="user"
-	password="foobar"
-}
-
-# EAP-FAST with WPA (WPA or WPA2)
-network={
-	ssid="eap-fast-test"
-	key_mgmt=WPA-EAP
-	eap=FAST
-	anonymous_identity="FAST-000102030405"
-	identity="username"
-	password="password"
-	phase1="fast_provisioning=1"
-	pac_file="/etc/wpa_supplicant.eap-fast-pac"
-}
-
-network={
-	ssid="eap-fast-test"
-	key_mgmt=WPA-EAP
-	eap=FAST
-	anonymous_identity="FAST-000102030405"
-	identity="username"
-	password="password"
-	phase1="fast_provisioning=1"
-	pac_file="blob://eap-fast-pac"
-}
-
-# Plaintext connection (no WPA, no IEEE 802.1X)
-network={
-	ssid="plaintext-test"
-	key_mgmt=NONE
-}
-
-
-# Shared WEP key connection (no WPA, no IEEE 802.1X)
-network={
-	ssid="static-wep-test"
-	key_mgmt=NONE
-	wep_key0="abcde"
-	wep_key1=0102030405
-	wep_key2="1234567890123"
-	wep_tx_keyidx=0
-	priority=5
-}
-
-
-# Shared WEP key connection (no WPA, no IEEE 802.1X) using Shared Key
-# IEEE 802.11 authentication
-network={
-	ssid="static-wep-test2"
-	key_mgmt=NONE
-	wep_key0="abcde"
-	wep_key1=0102030405
-	wep_key2="1234567890123"
-	wep_tx_keyidx=0
-	priority=5
-	auth_alg=SHARED
-}
-
-
-# IBSS/ad-hoc network with WPA-None/TKIP.
-network={
-	ssid="test adhoc"
-	mode=1
-	frequency=2412
-	proto=WPA
-	key_mgmt=WPA-NONE
-	pairwise=NONE
-	group=TKIP
-	psk="secret passphrase"
-}
-
-
-# Catch all example that allows more or less all configuration modes
-network={
-	ssid="example"
-	scan_ssid=1
-	key_mgmt=WPA-EAP WPA-PSK IEEE8021X NONE
-	pairwise=CCMP TKIP
-	group=CCMP TKIP WEP104 WEP40
-	psk="very secret passphrase"
-	eap=TTLS PEAP TLS
-	identity="user@example.com"
-	password="foobar"
-	ca_cert="/etc/cert/ca.pem"
-	client_cert="/etc/cert/user.pem"
-	private_key="/etc/cert/user.prv"
-	private_key_passwd="password"
-	phase1="peaplabel=0"
-}
-
-# Example of EAP-TLS with smartcard (openssl engine)
-network={
-	ssid="example"
-	key_mgmt=WPA-EAP
-	eap=TLS
-	proto=RSN
-	pairwise=CCMP TKIP
-	group=CCMP TKIP
-	identity="user@example.com"
-	ca_cert="/etc/cert/ca.pem"
-	client_cert="/etc/cert/user.pem"
-
-	engine=1
-
-	# The engine configured here must be available. Look at
-	# OpenSSL engine support in the global section.
-	# The key available through the engine must be the private key
-	# matching the client certificate configured above.
-
-	# use the opensc engine
-	#engine_id="opensc"
-	#key_id="45"
-
-	# use the pkcs11 engine
-	engine_id="pkcs11"
-	key_id="id_45"
-
-	# Optional PIN configuration; this can be left out and PIN will be
-	# asked through the control interface
-	pin="1234"
-}
-
-# Example configuration showing how to use an inlined blob as a CA certificate
-# data instead of using external file
-network={
-	ssid="example"
-	key_mgmt=WPA-EAP
-	eap=TTLS
-	identity="user@example.com"
-	anonymous_identity="anonymous@example.com"
-	password="foobar"
-	ca_cert="blob://exampleblob"
-	priority=20
-}
-
-blob-base64-exampleblob={
-SGVsbG8gV29ybGQhCg==
-}
-
-
-# Wildcard match for SSID (plaintext APs only). This example select any
-# open AP regardless of its SSID.
-network={
-	key_mgmt=NONE
-}
diff --git a/wpa_supplicant/wpa_supplicant_conf.mk b/wpa_supplicant/wpa_supplicant_conf.mk
index f2c71267..ac842fd2 100644
--- a/wpa_supplicant/wpa_supplicant_conf.mk
+++ b/wpa_supplicant/wpa_supplicant_conf.mk
@@ -29,7 +29,7 @@ LOCAL_MODULE_PATH := $(TARGET_OUT_ETC)/wifi
 
 include $(BUILD_SYSTEM)/base_rules.mk
 
-WPA_SUPPLICANT_CONF_TEMPLATE := $(LOCAL_PATH)/wpa_supplicant.conf
+WPA_SUPPLICANT_CONF_TEMPLATE := $(LOCAL_PATH)/wpa_supplicant_template.conf
 WPA_SUPPLICANT_CONF_SCRIPT := $(LOCAL_PATH)/wpa_supplicant_conf.sh
 $(LOCAL_BUILT_MODULE): PRIVATE_WIFI_DRIVER_SOCKET_IFACE := $(WIFI_DRIVER_SOCKET_IFACE)
 $(LOCAL_BUILT_MODULE): PRIVATE_WPA_SUPPLICANT_CONF_TEMPLATE := $(WPA_SUPPLICANT_CONF_TEMPLATE)
diff --git a/wpa_supplicant/wpa_supplicant_template.conf b/wpa_supplicant/wpa_supplicant_template.conf
new file mode 100644
index 00000000..a08eb33d
--- /dev/null
+++ b/wpa_supplicant/wpa_supplicant_template.conf
@@ -0,0 +1,6 @@
+##### wpa_supplicant configuration file template #####
+update_config=1
+ctrl_interface=wlan0
+eapol_version=1
+ap_scan=1
+fast_reauth=1