diff options
Diffstat (limited to 'doc/man/Makefile.in')
-rw-r--r-- | doc/man/Makefile.in | 374 |
1 files changed, 197 insertions, 177 deletions
diff --git a/doc/man/Makefile.in b/doc/man/Makefile.in index d2018c7f..45c454e9 100644 --- a/doc/man/Makefile.in +++ b/doc/man/Makefile.in @@ -1,9 +1,8 @@ -# Makefile.in generated by automake 1.11.6 from Makefile.am. +# Makefile.in generated by automake 1.13.3 from Makefile.am. # @configure_input@ -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software -# Foundation, Inc. +# Copyright (C) 1994-2013 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -16,23 +15,51 @@ @SET_MAKE@ VPATH = @srcdir@ -am__make_dryrun = \ - { \ - am__dry=no; \ +am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' +am__make_running_with_option = \ + case $${target_option-} in \ + ?) ;; \ + *) echo "am__make_running_with_option: internal error: invalid" \ + "target option '$${target_option-}' specified" >&2; \ + exit 1;; \ + esac; \ + has_opt=no; \ + sane_makeflags=$$MAKEFLAGS; \ + if $(am__is_gnu_make); then \ + sane_makeflags=$$MFLAGS; \ + else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ - echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ - | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ - *) \ - for am__flg in $$MAKEFLAGS; do \ - case $$am__flg in \ - *=*|--*) ;; \ - *n*) am__dry=yes; break;; \ - esac; \ - done;; \ + bs=\\; \ + sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ + | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ - test $$am__dry = yes; \ - } + fi; \ + skip_next=no; \ + strip_trailopt () \ + { \ + flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ + }; \ + for flg in $$sane_makeflags; do \ + test $$skip_next = yes && { skip_next=no; continue; }; \ + case $$flg in \ + *=*|--*) continue;; \ + -*I) strip_trailopt 'I'; skip_next=yes;; \ + -*I?*) strip_trailopt 'I';; \ + -*O) strip_trailopt 'O'; skip_next=yes;; \ + -*O?*) strip_trailopt 'O';; \ + -*l) strip_trailopt 'l'; skip_next=yes;; \ + -*l?*) strip_trailopt 'l';; \ + -[dEDm]) skip_next=yes;; \ + -[JT]) skip_next=yes;; \ + esac; \ + case $$flg in \ + *$$target_option*) has_opt=yes; break;; \ + esac; \ + done; \ + test $$has_opt = yes +am__make_dryrun = (target_option=n; $(am__make_running_with_option)) +am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ @@ -51,10 +78,17 @@ PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ +@USE_NLS_TRUE@am__append_1 = fr +@USE_NANORC_TRUE@am__append_2 = nanorc.5 +@USE_NANORC_TRUE@am__append_3 = nanorc.5.html +@GROFF_HTML_TRUE@am__append_4 = $(html_pages) subdir = doc/man -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in +DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ + $(top_srcdir)/mkinstalldirs $(dist_man_MANS) \ + $(am__dist_html_DATA_DIST) ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/ac_define_dir.m4 \ + $(top_srcdir)/m4/ax_check_compile_flag.m4 \ $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/glib-2.0.m4 \ $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/isc-posix.m4 \ $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \ @@ -66,15 +100,28 @@ mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = +AM_V_P = $(am__v_P_@AM_V@) +am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) +am__v_P_0 = false +am__v_P_1 = : +AM_V_GEN = $(am__v_GEN_@AM_V@) +am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) +am__v_GEN_0 = @echo " GEN " $@; +am__v_GEN_1 = +AM_V_at = $(am__v_at_@AM_V@) +am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) +am__v_at_0 = @ +am__v_at_1 = SOURCES = DIST_SOURCES = -RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ - html-recursive info-recursive install-data-recursive \ - install-dvi-recursive install-exec-recursive \ - install-html-recursive install-info-recursive \ - install-pdf-recursive install-ps-recursive install-recursive \ - installcheck-recursive installdirs-recursive pdf-recursive \ - ps-recursive uninstall-recursive +RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ + ctags-recursive dvi-recursive html-recursive info-recursive \ + install-data-recursive install-dvi-recursive \ + install-exec-recursive install-html-recursive \ + install-info-recursive install-pdf-recursive \ + install-ps-recursive install-recursive installcheck-recursive \ + installdirs-recursive pdf-recursive ps-recursive \ + tags-recursive uninstall-recursive am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ @@ -109,16 +156,37 @@ am__uninstall_files_from_dir = { \ } man1dir = $(mandir)/man1 am__installdirs = "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(man5dir)" \ - "$(DESTDIR)$(htmlmandir)" + "$(DESTDIR)$(htmldir)" man5dir = $(mandir)/man5 NROFF = nroff -MANS = $(man_MANS) -DATA = $(htmlman_DATA) +MANS = $(dist_man_MANS) +am__dist_html_DATA_DIST = nano.1.html rnano.1.html nanorc.5.html +DATA = $(dist_html_DATA) RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive -AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ - $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ +am__recursive_targets = \ + $(RECURSIVE_TARGETS) \ + $(RECURSIVE_CLEAN_TARGETS) \ + $(am__extra_recursive_targets) +AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ distdir +am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +# Read a list of newline-separated strings from the standard input, +# and print each of them once, without duplicates. Input order is +# *not* preserved. +am__uniquify_input = $(AWK) '\ + BEGIN { nonempty = 0; } \ + { items[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in items) print i; }; } \ +' +# Make sure the list of sources is unique. This is necessary because, +# e.g., the same source file might be shared among _SOURCES variables +# for different programs/libraries. +am__define_uniq_tagged_files = \ + list='$(am__tagged_files)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | $(am__uniquify_input)` ETAGS = etags CTAGS = ctags DIST_SUBDIRS = fr @@ -150,6 +218,7 @@ am__relativize = \ reldir="$$dir2" ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ @@ -195,7 +264,11 @@ MKDIR_P = @MKDIR_P@ MKINSTALLDIRS = @MKINSTALLDIRS@ MSGFMT = @MSGFMT@ MSGMERGE = @MSGMERGE@ +NCURSESW_CFLAGS = @NCURSESW_CFLAGS@ NCURSESW_CONFIG = @NCURSESW_CONFIG@ +NCURSESW_LIBS = @NCURSESW_LIBS@ +NCURSES_CFLAGS = @NCURSES_CFLAGS@ +NCURSES_LIBS = @NCURSES_LIBS@ OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ @@ -207,6 +280,8 @@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKGDATADIR = @PKGDATADIR@ PKG_CONFIG = @PKG_CONFIG@ +PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ +PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ POSUB = @POSUB@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ @@ -236,6 +311,7 @@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ +haveit = @haveit@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ @@ -264,18 +340,12 @@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ -@USE_NLS_FALSE@SUBDIRS = -@USE_NLS_TRUE@SUBDIRS = fr -@USE_NANORC_FALSE@man_MANS = nano.1 rnano.1 -@USE_NANORC_TRUE@man_MANS = nano.1 nanorc.5 rnano.1 -@GROFF_HTML_TRUE@@USE_NANORC_FALSE@BUILT_SOURCES = nano.1.html rnano.1.html -@GROFF_HTML_TRUE@@USE_NANORC_TRUE@BUILT_SOURCES = nano.1.html nanorc.5.html rnano.1.html -nano_man_mans = nano.1 nanorc.5 rnano.1 -@GROFF_HTML_TRUE@htmlman_DATA = nano.1.html nanorc.5.html rnano.1.html -@GROFF_HTML_TRUE@htmlmandir = $(datadir)/nano/man-html -@GROFF_HTML_TRUE@nano_built_sources = nano.1.html nanorc.5.html rnano.1.html -@GROFF_HTML_FALSE@EXTRA_DIST = $(nano_man_mans) -@GROFF_HTML_TRUE@EXTRA_DIST = $(nano_man_mans) $(nano_built_sources) +SUBDIRS = $(am__append_1) +BUILT_SOURCES = $(am__append_4) +dist_man_MANS = nano.1 rnano.1 $(am__append_2) +html_pages = nano.1.html rnano.1.html $(am__append_3) +@GROFF_HTML_TRUE@dist_html_DATA = $(html_pages) +EXTRA_DIST = $(BUILT_SOURCES) all: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) all-recursive @@ -310,10 +380,10 @@ $(top_srcdir)/configure: $(am__configure_deps) $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): -install-man1: $(man_MANS) +install-man1: $(dist_man_MANS) @$(NORMAL_INSTALL) @list1=''; \ - list2='$(man_MANS)'; \ + list2='$(dist_man_MANS)'; \ test -n "$(man1dir)" \ && test -n "`echo $$list1$$list2`" \ || exit 0; \ @@ -348,15 +418,15 @@ uninstall-man1: @$(NORMAL_UNINSTALL) @list=''; test -n "$(man1dir)" || exit 0; \ files=`{ for i in $$list; do echo "$$i"; done; \ - l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \ + l2='$(dist_man_MANS)'; for i in $$l2; do echo "$$i"; done | \ sed -n '/\.1[a-z]*$$/p'; \ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir) -install-man5: $(man_MANS) +install-man5: $(dist_man_MANS) @$(NORMAL_INSTALL) @list1=''; \ - list2='$(man_MANS)'; \ + list2='$(dist_man_MANS)'; \ test -n "$(man5dir)" \ && test -n "`echo $$list1$$list2`" \ || exit 0; \ @@ -391,50 +461,53 @@ uninstall-man5: @$(NORMAL_UNINSTALL) @list=''; test -n "$(man5dir)" || exit 0; \ files=`{ for i in $$list; do echo "$$i"; done; \ - l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \ + l2='$(dist_man_MANS)'; for i in $$l2; do echo "$$i"; done | \ sed -n '/\.5[a-z]*$$/p'; \ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^5][0-9a-z]*$$,5,;x' \ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ dir='$(DESTDIR)$(man5dir)'; $(am__uninstall_files_from_dir) -install-htmlmanDATA: $(htmlman_DATA) +install-dist_htmlDATA: $(dist_html_DATA) @$(NORMAL_INSTALL) - @list='$(htmlman_DATA)'; test -n "$(htmlmandir)" || list=; \ + @list='$(dist_html_DATA)'; test -n "$(htmldir)" || list=; \ if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(htmlmandir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(htmlmandir)" || exit 1; \ + echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(htmldir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmlmandir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(htmlmandir)" || exit $$?; \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \ done -uninstall-htmlmanDATA: +uninstall-dist_htmlDATA: @$(NORMAL_UNINSTALL) - @list='$(htmlman_DATA)'; test -n "$(htmlmandir)" || list=; \ + @list='$(dist_html_DATA)'; test -n "$(htmldir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - dir='$(DESTDIR)$(htmlmandir)'; $(am__uninstall_files_from_dir) + dir='$(DESTDIR)$(htmldir)'; $(am__uninstall_files_from_dir) # This directory's subdirectories are mostly independent; you can cd -# into them and run `make' without going through this Makefile. -# To change the values of `make' variables: instead of editing Makefiles, -# (1) if the variable is set in `config.status', edit `config.status' -# (which will cause the Makefiles to be regenerated when you run `make'); -# (2) otherwise, pass the desired values on the `make' command line. -$(RECURSIVE_TARGETS): - @fail= failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ - *k*) failcom='fail=yes';; \ - esac; \ - done; \ +# into them and run 'make' without going through this Makefile. +# To change the values of 'make' variables: instead of editing Makefiles, +# (1) if the variable is set in 'config.status', edit 'config.status' +# (which will cause the Makefiles to be regenerated when you run 'make'); +# (2) otherwise, pass the desired values on the 'make' command line. +$(am__recursive_targets): + @fail=; \ + if $(am__make_keepgoing); then \ + failcom='fail=yes'; \ + else \ + failcom='exit 1'; \ + fi; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ + *) list='$(SUBDIRS)' ;; \ + esac; \ + for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ @@ -449,57 +522,12 @@ $(RECURSIVE_TARGETS): $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" -$(RECURSIVE_CLEAN_TARGETS): - @fail= failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ - *k*) failcom='fail=yes';; \ - esac; \ - done; \ - dot_seen=no; \ - case "$@" in \ - distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ - *) list='$(SUBDIRS)' ;; \ - esac; \ - rev=''; for subdir in $$list; do \ - if test "$$subdir" = "."; then :; else \ - rev="$$subdir $$rev"; \ - fi; \ - done; \ - rev="$$rev ."; \ - target=`echo $@ | sed s/-recursive//`; \ - for subdir in $$rev; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || eval $$failcom; \ - done && test -z "$$fail" -tags-recursive: - list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ - done -ctags-recursive: - list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ - done +ID: $(am__tagged_files) + $(am__define_uniq_tagged_files); mkid -fID $$unique +tags: tags-recursive +TAGS: tags -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - mkid -fID $$unique -tags: TAGS - -TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) +tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ @@ -515,12 +543,7 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ + $(am__define_uniq_tagged_files); \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ @@ -532,15 +555,11 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $$unique; \ fi; \ fi -ctags: CTAGS -CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ +ctags: ctags-recursive + +CTAGS: ctags +ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) + $(am__define_uniq_tagged_files); \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique @@ -549,24 +568,26 @@ GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" +cscopelist: cscopelist-recursive + +cscopelist-am: $(am__tagged_files) + list='$(am__tagged_files)'; \ + case "$(srcdir)" in \ + [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ + *) sdir=$(subdir)/$(srcdir) ;; \ + esac; \ + for i in $$list; do \ + if test -f "$$i"; then \ + echo "$(subdir)/$$i"; \ + else \ + echo "$$sdir/$$i"; \ + fi; \ + done >> $(top_builddir)/cscope.files distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) - @list='$(MANS)'; if test -n "$$list"; then \ - list=`for p in $$list; do \ - if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ - if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \ - if test -n "$$list" && \ - grep 'ab help2man is required to generate this page' $$list >/dev/null; then \ - echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \ - grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \ - echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \ - echo " typically \`make maintainer-clean' will remove them" >&2; \ - exit 1; \ - else :; fi; \ - else :; fi @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ @@ -627,7 +648,7 @@ check: $(BUILT_SOURCES) all-am: Makefile $(MANS) $(DATA) installdirs: installdirs-recursive installdirs-am: - for dir in "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(man5dir)" "$(DESTDIR)$(htmlmandir)"; do \ + for dir in "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(man5dir)" "$(DESTDIR)$(htmldir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: $(BUILT_SOURCES) @@ -682,7 +703,7 @@ info: info-recursive info-am: -install-data-am: install-htmlmanDATA install-man +install-data-am: install-dist_htmlDATA install-man install-dvi: install-dvi-recursive @@ -726,36 +747,35 @@ ps: ps-recursive ps-am: -uninstall-am: uninstall-htmlmanDATA uninstall-man +uninstall-am: uninstall-dist_htmlDATA uninstall-man uninstall-man: uninstall-man1 uninstall-man5 -.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all check \ - ctags-recursive install install-am install-strip \ - tags-recursive +.MAKE: $(am__recursive_targets) all check install install-am \ + install-strip -.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ - all all-am check check-am clean clean-generic ctags \ - ctags-recursive distclean distclean-generic distclean-tags \ - distdir dvi dvi-am html html-am info info-am install \ - install-am install-data install-data-am install-dvi \ +.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \ + check-am clean clean-generic cscopelist-am ctags ctags-am \ + distclean distclean-generic distclean-tags distdir dvi dvi-am \ + html html-am info info-am install install-am install-data \ + install-data-am install-dist_htmlDATA install-dvi \ install-dvi-am install-exec install-exec-am install-html \ - install-html-am install-htmlmanDATA install-info \ - install-info-am install-man install-man1 install-man5 \ - install-pdf install-pdf-am install-ps install-ps-am \ - install-strip installcheck installcheck-am installdirs \ - installdirs-am maintainer-clean maintainer-clean-generic \ - mostlyclean mostlyclean-generic pdf pdf-am ps ps-am tags \ - tags-recursive uninstall uninstall-am uninstall-htmlmanDATA \ - uninstall-man uninstall-man1 uninstall-man5 - - -@GROFF_HTML_TRUE@nano.1.html: nano.1 -@GROFF_HTML_TRUE@ groff -t -mandoc -Thtml < $? > $@ -@GROFF_HTML_TRUE@nanorc.5.html: nanorc.5 -@GROFF_HTML_TRUE@ groff -t -mandoc -Thtml < $? > $@ -@GROFF_HTML_TRUE@rnano.1.html: rnano.1 -@GROFF_HTML_TRUE@ groff -t -mandoc -Thtml < $? > $@ + install-html-am install-info install-info-am install-man \ + install-man1 install-man5 install-pdf install-pdf-am \ + install-ps install-ps-am install-strip installcheck \ + installcheck-am installdirs installdirs-am maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-generic pdf \ + pdf-am ps ps-am tags tags-am uninstall uninstall-am \ + uninstall-dist_htmlDATA uninstall-man uninstall-man1 \ + uninstall-man5 + + +nano.1.html: nano.1 + groff -t -mandoc -Thtml < $? > $@ +nanorc.5.html: nanorc.5 + groff -t -mandoc -Thtml < $? > $@ +rnano.1.html: rnano.1 + groff -t -mandoc -Thtml < $? > $@ # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. |