diff options
Diffstat (limited to 'config.status')
| -rwxr-xr-x | config.status | 1950 |
1 files changed, 0 insertions, 1950 deletions
diff --git a/config.status b/config.status deleted file mode 100755 index a01315f..0000000 --- a/config.status +++ /dev/null @@ -1,1950 +0,0 @@ -#! /bin/sh -# Generated by configure. -# Run this file to recreate the current configuration. -# Compiler output produced by configure, useful for debugging -# configure, is in config.log if it exists. - -debug=false -ac_cs_recheck=false -ac_cs_silent=false -SHELL=${CONFIG_SHELL-/bin/sh} -## --------------------- ## -## M4sh Initialization. ## -## --------------------- ## - -# Be more Bourne compatible -DUALCASE=1; export DUALCASE # for MKS sh -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in - *posix*) set -o posix ;; -esac - -fi - - - - -# PATH needs CR -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - echo "#! /bin/sh" >conf$$.sh - echo "exit 0" >>conf$$.sh - chmod +x conf$$.sh - if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then - PATH_SEPARATOR=';' - else - PATH_SEPARATOR=: - fi - rm -f conf$$.sh -fi - -# Support unset when possible. -if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then - as_unset=unset -else - as_unset=false -fi - - -# IFS -# We need space, tab and new line, in precisely that order. Quoting is -# there to prevent editors from complaining about space-tab. -# (If _AS_PATH_WALK were called with IFS unset, it would disable word -# splitting by setting IFS to empty value.) -as_nl=' -' -IFS=" "" $as_nl" - -# Find who we are. Look in the path if we contain no directory separator. -case $0 in - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break -done -IFS=$as_save_IFS - - ;; -esac -# We did not find ourselves, most probably we were run as `sh COMMAND' -# in which case we are not to be found in the path. -if test "x$as_myself" = x; then - as_myself=$0 -fi -if test ! -f "$as_myself"; then - echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 - { (exit 1); exit 1; } -fi - -# Work around bugs in pre-3.0 UWIN ksh. -for as_var in ENV MAIL MAILPATH -do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var -done -PS1='$ ' -PS2='> ' -PS4='+ ' - -# NLS nuisances. -for as_var in \ - LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ - LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ - LC_TELEPHONE LC_TIME -do - if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then - eval $as_var=C; export $as_var - else - ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var - fi -done - -# Required to use basename. -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi - -if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - - -# Name of the executable. -as_me=`$as_basename -- "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| . 2>/dev/null || -echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ - s//\1/ - q - } - /^X\/\(\/\/\)$/{ - s//\1/ - q - } - /^X\/\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - -# CDPATH. -$as_unset CDPATH - - - - as_lineno_1=$LINENO - as_lineno_2=$LINENO - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { - - # Create $as_me.lineno as a copy of $as_myself, but with $LINENO - # uniformly replaced by the line number. The first 'sed' inserts a - # line-number line after each line using $LINENO; the second 'sed' - # does the real work. The second script uses 'N' to pair each - # line-number line with the line containing $LINENO, and appends - # trailing '-' during substitution so that $LINENO is not a special - # case at line end. - # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the - # scripts with optimization help from Paolo Bonzini. Blame Lee - # E. McMahon (1931-1989) for sed's syntax. :-) - sed -n ' - p - /[$]LINENO/= - ' <$as_myself | - sed ' - s/[$]LINENO.*/&-/ - t lineno - b - :lineno - N - :loop - s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ - t loop - s/-\n.*// - ' >$as_me.lineno && - chmod +x "$as_me.lineno" || - { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 - { (exit 1); exit 1; }; } - - # Don't try to exec as it changes $[0], causing all sort of problems - # (the dirname of $[0] is not the place where we might find the - # original and so on. Autoconf is especially sensitive to this). - . "./$as_me.lineno" - # Exit status is that of the last command. - exit -} - - -if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then - as_dirname=dirname -else - as_dirname=false -fi - -ECHO_C= ECHO_N= ECHO_T= -case `echo -n x` in --n*) - case `echo 'x\c'` in - *c*) ECHO_T=' ';; # ECHO_T is single tab character. - *) ECHO_C='\c';; - esac;; -*) - ECHO_N='-n';; -esac - -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi - -rm -f conf$$ conf$$.exe conf$$.file -if test -d conf$$.dir; then - rm -f conf$$.dir/conf$$.file -else - rm -f conf$$.dir - mkdir conf$$.dir -fi -echo >conf$$.file -if ln -s conf$$.file conf$$ 2>/dev/null; then - as_ln_s='ln -s' - # ... but there are two gotchas: - # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. - # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -p'. - ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || - as_ln_s='cp -p' -elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln -else - as_ln_s='cp -p' -fi -rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file -rmdir conf$$.dir 2>/dev/null - -if mkdir -p . 2>/dev/null; then - as_mkdir_p=: -else - test -d ./-p && rmdir ./-p - as_mkdir_p=false -fi - -if test -x / >/dev/null 2>&1; then - as_test_x='test -x' -else - if ls -dL / >/dev/null 2>&1; then - as_ls_L_option=L - else - as_ls_L_option= - fi - as_test_x=' - eval sh -c '\'' - if test -d "$1"; then - test -d "$1/."; - else - case $1 in - -*)set "./$1";; - esac; - case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in - ???[sx]*):;;*)false;;esac;fi - '\'' sh - ' -fi -as_executable_p=$as_test_x - -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" - -# Sed expression to map a string onto a valid variable name. -as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - - -exec 6>&1 - -# Save the log message, to keep $[0] and so on meaningful, and to -# report actual input values of CONFIG_FILES etc. instead of their -# values after options handling. -ac_log=" -This file was extended by htop $as_me 0.9, which was -generated by GNU Autoconf 2.61. Invocation command line was - - CONFIG_FILES = $CONFIG_FILES - CONFIG_HEADERS = $CONFIG_HEADERS - CONFIG_LINKS = $CONFIG_LINKS - CONFIG_COMMANDS = $CONFIG_COMMANDS - $ $0 $@ - -on `(hostname || uname -n) 2>/dev/null | sed 1q` -" - -# Files that config.status was made for. -config_files=" plpa-1.3.2/Makefile plpa-1.3.2/src/Makefile plpa-1.3.2/src/libplpa/Makefile Makefile htop.1" -config_headers=" config.h plpa-1.3.2/src/libplpa/plpa_config.h plpa-1.3.2/src/libplpa/plpa.h" -config_commands=" depfiles libtool" - -ac_cs_usage="\ -\`$as_me' instantiates files from templates according to the -current configuration. - -Usage: $0 [OPTIONS] [FILE]... - - -h, --help print this help, then exit - -V, --version print version number and configuration settings, then exit - -q, --quiet do not print progress messages - -d, --debug don't remove temporary files - --recheck update $as_me by reconfiguring in the same conditions - --file=FILE[:TEMPLATE] - instantiate the configuration file FILE - --header=FILE[:TEMPLATE] - instantiate the configuration header FILE - -Configuration files: -$config_files - -Configuration headers: -$config_headers - -Configuration commands: -$config_commands - -Report bugs to <bug-autoconf@gnu.org>." - -ac_cs_version="\ -htop config.status 0.9 -configured by ./configure, generated by GNU Autoconf 2.61, - with options \"\" - -Copyright (C) 2006 Free Software Foundation, Inc. -This config.status script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it." - -ac_pwd='/home/pundiramit/linaro/smp/htop-0.9' -srcdir='.' -INSTALL='/usr/bin/install -c' -MKDIR_P='/bin/mkdir -p' -# If no file are specified by the user, then we need to provide default -# value. By we need to know if files were specified by the user. -ac_need_defaults=: -while test $# != 0 -do - case $1 in - --*=*) - ac_option=`expr "X$1" : 'X\([^=]*\)='` - ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` - ac_shift=: - ;; - *) - ac_option=$1 - ac_optarg=$2 - ac_shift=shift - ;; - esac - - case $ac_option in - # Handling of the options. - -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) - ac_cs_recheck=: ;; - --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) - echo "$ac_cs_version"; exit ;; - --debug | --debu | --deb | --de | --d | -d ) - debug=: ;; - --file | --fil | --fi | --f ) - $ac_shift - CONFIG_FILES="$CONFIG_FILES $ac_optarg" - ac_need_defaults=false;; - --header | --heade | --head | --hea ) - $ac_shift - CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" - ac_need_defaults=false;; - --he | --h) - # Conflict between --help and --header - { echo "$as_me: error: ambiguous option: $1 -Try \`$0 --help' for more information." >&2 - { (exit 1); exit 1; }; };; - --help | --hel | -h ) - echo "$ac_cs_usage"; exit ;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil | --si | --s) - ac_cs_silent=: ;; - - # This is an error. - -*) { echo "$as_me: error: unrecognized option: $1 -Try \`$0 --help' for more information." >&2 - { (exit 1); exit 1; }; } ;; - - *) ac_config_targets="$ac_config_targets $1" - ac_need_defaults=false ;; - - esac - shift -done - -ac_configure_extra_args= - -if $ac_cs_silent; then - exec 6>/dev/null - ac_configure_extra_args="$ac_configure_extra_args --silent" -fi - -if $ac_cs_recheck; then - echo "running CONFIG_SHELL=/bin/sh /bin/sh ./configure " $ac_configure_extra_args " --no-create --no-recursion" >&6 - CONFIG_SHELL=/bin/sh - export CONFIG_SHELL - exec /bin/sh "./configure" $ac_configure_extra_args --no-create --no-recursion -fi - -exec 5>>config.log -{ - echo - sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX -## Running $as_me. ## -_ASBOX - echo "$ac_log" -} >&5 - -# -# INIT-COMMANDS -# -AMDEP_TRUE="" ac_aux_dir="." - - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -sed_quote_subst='s/\(["`$\\]\)/\\\1/g' -double_quote_subst='s/\(["`\\]\)/\\\1/g' -delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' -enable_shared='no' -enable_static='yes' -macro_version='2.2.6' -macro_revision='1.3012' -pic_mode='default' -enable_fast_install='needless' -host_alias='' -host='i686-pc-linux-gnu' -host_os='linux-gnu' -build_alias='' -build='i686-pc-linux-gnu' -build_os='linux-gnu' -SED='/bin/sed' -Xsed='/bin/sed -e 1s/^X//' -GREP='/bin/grep' -EGREP='/bin/grep -E' -FGREP='/bin/grep -F' -LD='/usr/bin/ld' -NM='/usr/bin/nm -B' -LN_S='ln -s' -max_cmd_len='1572864' -ac_objext='o' -exeext='' -lt_unset='unset' -lt_SP2NL='tr \040 \012' -lt_NL2SP='tr \015\012 \040\040' -reload_flag=' -r' -reload_cmds='$LD$reload_flag -o $output$reload_objs' -OBJDUMP='objdump' -deplibs_check_method='pass_all' -file_magic_cmd='$MAGIC_CMD' -AR='ar' -AR_FLAGS='cru' -STRIP='strip' -RANLIB='ranlib' -old_postinstall_cmds='chmod 644 $oldlib~$RANLIB $oldlib' -old_postuninstall_cmds='' -old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs~$RANLIB $oldlib' -CC='gcc' -CFLAGS='-g -O2' -compiler='gcc' -GCC='yes' -lt_cv_sys_global_symbol_pipe='sed -n -e '\''s/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p'\''' -lt_cv_sys_global_symbol_to_cdecl='sed -n -e '\''s/^T .* \(.*\)$/extern int \1();/p'\'' -e '\''s/^[ABCDGIRSTW]* .* \(.*\)$/extern char \1;/p'\''' -lt_cv_sys_global_symbol_to_c_name_address='sed -n -e '\''s/^: \([^ ]*\) $/ {\"\1\", (void *) 0},/p'\'' -e '\''s/^[ABCDGIRSTW]* \([^ ]*\) \([^ ]*\)$/ {"\2", (void *) \&\2},/p'\''' -lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='sed -n -e '\''s/^: \([^ ]*\) $/ {\"\1\", (void *) 0},/p'\'' -e '\''s/^[ABCDGIRSTW]* \([^ ]*\) \(lib[^ ]*\)$/ {"\2", (void *) \&\2},/p'\'' -e '\''s/^[ABCDGIRSTW]* \([^ ]*\) \([^ ]*\)$/ {"lib\2", (void *) \&\2},/p'\''' -objdir='.libs' -SHELL='/bin/sh' -ECHO='echo' -MAGIC_CMD='file' -lt_prog_compiler_no_builtin_flag=' -fno-builtin' -lt_prog_compiler_wl='-Wl,' -lt_prog_compiler_pic=' -fPIC -DPIC' -lt_prog_compiler_static='-static' -lt_cv_prog_compiler_c_o='yes' -need_locks='no' -DSYMUTIL='' -NMEDIT='' -LIPO='' -OTOOL='' -OTOOL64='' -libext='a' -shrext_cmds='.so' -extract_expsyms_cmds='' -archive_cmds_need_lc='yes' -enable_shared_with_static_runtimes='no' -export_dynamic_flag_spec='${wl}--export-dynamic' -whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive' -compiler_needs_object='no' -old_archive_from_new_cmds='' -old_archive_from_expsyms_cmds='' -archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' -archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - echo "local: *; };" >> $output_objdir/$libname.ver~ - $CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' -module_cmds='' -module_expsym_cmds='' -with_gnu_ld='yes' -allow_undefined_flag='' -no_undefined_flag='' -hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' -hardcode_libdir_flag_spec_ld='' -hardcode_libdir_separator='' -hardcode_direct='no' -hardcode_direct_absolute='no' -hardcode_minus_L='no' -hardcode_shlibpath_var='unsupported' -hardcode_automatic='no' -inherit_rpath='no' -link_all_deplibs='unknown' -fix_srcfile_path='' -always_export_symbols='no' -export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' -exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' -include_expsyms='' -prelink_cmds='' -file_list_spec='' -variables_saved_for_relink='PATH LD_LIBRARY_PATH LD_RUN_PATH GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH' -need_lib_prefix='no' -need_version='no' -version_type='linux' -runpath_var='LD_RUN_PATH' -shlibpath_var='LD_LIBRARY_PATH' -shlibpath_overrides_runpath='no' -libname_spec='lib$name' -library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -soname_spec='${libname}${release}${shared_ext}$major' -postinstall_cmds='' -postuninstall_cmds='' -finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' -finish_eval='' -hardcode_into_libs='yes' -sys_lib_search_path_spec='/usr/lib/gcc/i686-linux-gnu/4.6.1 /usr/lib/i386-linux-gnu /usr/lib /lib/i386-linux-gnu /lib' -sys_lib_dlsearch_path_spec='/lib /usr/lib /lib64 /usr/lib64 /usr/lib/i386-linux-gnu/mesa /lib/i386-linux-gnu /usr/lib/i386-linux-gnu /lib/i686-linux-gnu /usr/lib/i686-linux-gnu /usr/local/lib ' -hardcode_action='immediate' -enable_dlopen='unknown' -enable_dlopen_self='unknown' -enable_dlopen_self_static='unknown' -old_striplib='strip --strip-debug' -striplib='strip --strip-unneeded' - -LTCC='gcc' -LTCFLAGS='-g -O2' -compiler='gcc' - -# Quote evaled strings. -for var in SED GREP EGREP FGREP LD NM LN_S lt_SP2NL lt_NL2SP reload_flag OBJDUMP deplibs_check_method file_magic_cmd AR AR_FLAGS STRIP RANLIB CC CFLAGS compiler lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl lt_cv_sys_global_symbol_to_c_name_address lt_cv_sys_global_symbol_to_c_name_address_lib_prefix SHELL ECHO lt_prog_compiler_no_builtin_flag lt_prog_compiler_wl lt_prog_compiler_pic lt_prog_compiler_static lt_cv_prog_compiler_c_o need_locks DSYMUTIL NMEDIT LIPO OTOOL OTOOL64 shrext_cmds export_dynamic_flag_spec whole_archive_flag_spec compiler_needs_object with_gnu_ld allow_undefined_flag no_undefined_flag hardcode_libdir_flag_spec hardcode_libdir_flag_spec_ld hardcode_libdir_separator fix_srcfile_path exclude_expsyms include_expsyms file_list_spec variables_saved_for_relink libname_spec library_names_spec soname_spec finish_eval old_striplib striplib; do - case `eval \\$ECHO "X\\$$var"` in - *[\\\`\"\$]*) - eval "lt_$var=\\\"\`\$ECHO \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" - ;; - *) - eval "lt_$var=\\\"\$$var\\\"" - ;; - esac -done - -# Double-quote double-evaled strings. -for var in reload_cmds old_postinstall_cmds old_postuninstall_cmds old_archive_cmds extract_expsyms_cmds old_archive_from_new_cmds old_archive_from_expsyms_cmds archive_cmds archive_expsym_cmds module_cmds module_expsym_cmds export_symbols_cmds prelink_cmds postinstall_cmds postuninstall_cmds finish_cmds sys_lib_search_path_spec sys_lib_dlsearch_path_spec; do - case `eval \\$ECHO "X\\$$var"` in - *[\\\`\"\$]*) - eval "lt_$var=\\\"\`\$ECHO \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" - ;; - *) - eval "lt_$var=\\\"\$$var\\\"" - ;; - esac -done - -# Fix-up fallback echo if it was mangled by the above quoting rules. -case $lt_ECHO in -*'\$0 --fallback-echo"') lt_ECHO=`$ECHO "X$lt_ECHO" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` - ;; -esac - -ac_aux_dir='.' -xsi_shell='yes' -lt_shell_append='yes' - -# See if we are running on zsh, and set the options which allow our -# commands through without removal of \ escapes INIT. -if test -n "${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST -fi - - - PACKAGE='htop' - VERSION='0.9' - TIMESTAMP='' - RM='rm -f' - ofile='libtool' - - - - - -# Handling of arguments. -for ac_config_target in $ac_config_targets -do - case $ac_config_target in - "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; - "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; - "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;; - "plpa-1.3.2/src/libplpa/plpa_config.h") CONFIG_HEADERS="$CONFIG_HEADERS plpa-1.3.2/src/libplpa/plpa_config.h" ;; - "plpa-1.3.2/src/libplpa/plpa.h") CONFIG_HEADERS="$CONFIG_HEADERS plpa-1.3.2/src/libplpa/plpa.h" ;; - "plpa-1.3.2/Makefile") CONFIG_FILES="$CONFIG_FILES plpa-1.3.2/Makefile" ;; - "plpa-1.3.2/src/Makefile") CONFIG_FILES="$CONFIG_FILES plpa-1.3.2/src/Makefile" ;; - "plpa-1.3.2/src/libplpa/Makefile") CONFIG_FILES="$CONFIG_FILES plpa-1.3.2/src/libplpa/Makefile" ;; - "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; - "htop.1") CONFIG_FILES="$CONFIG_FILES htop.1" ;; - - *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 -echo "$as_me: error: invalid argument: $ac_config_target" >&2;} - { (exit 1); exit 1; }; };; - esac -done - - -# If the user did not use the arguments to specify the items to instantiate, -# then the envvar interface is used. Set only those that are not. -# We use the long form for the default assignment because of an extremely -# bizarre bug on SunOS 4.1.3. -if $ac_need_defaults; then - test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files - test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers - test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands -fi - -# Have a temporary directory for convenience. Make it in the build tree -# simply because there is no reason against having it here, and in addition, -# creating and moving files from /tmp can sometimes cause problems. -# Hook for its removal unless debugging. -# Note that there is a small window in which the directory will not be cleaned: -# after its creation but before its name has been assigned to `$tmp'. -$debug || -{ - tmp= - trap 'exit_status=$? - { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status -' 0 - trap '{ (exit 1); exit 1; }' 1 2 13 15 -} -# Create a (secure) tmp directory for tmp files. - -{ - tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && - test -n "$tmp" && test -d "$tmp" -} || -{ - tmp=./conf$$-$RANDOM - (umask 077 && mkdir "$tmp") -} || -{ - echo "$me: cannot create a temporary directory in ." >&2 - { (exit 1); exit 1; } -} - -# -# Set up the sed scripts for CONFIG_FILES section. -# - -# No need to generate the scripts if there are no CONFIG_FILES. -# This happens for instance when ./config.status config.h -if test -n "$CONFIG_FILES"; then - -cat >"$tmp/subs-1.sed" <<\CEOF -/@[a-zA-Z_][a-zA-Z_0-9]*@/!b -s,@SHELL@,|#_!!_#|/bin/sh,g -s,@PATH_SEPARATOR@,|#_!!_#|:,g -s,@PACKAGE_NAME@,|#_!!_#|htop,g -s,@PACKAGE_TARNAME@,|#_!!_#|htop,g -s,@PACKAGE_VERSION@,|#_!!_#|0.9,g -s,@PACKAGE_STRING@,|#_!!_#|htop 0.9,g -s,@PACKAGE_BUGREPORT@,|#_!!_#|loderunner@|#_!!_#|users.sourceforge.net,g -s,@exec_prefix@,|#_!!_#|${prefix},g -s,@prefix@,|#_!!_#|/usr/local,g -s,@program_transform_name@,|#_!!_#|s\,x\,x\,,g -s,@bindir@,|#_!!_#|${exec_prefix}/bin,g -s,@sbindir@,|#_!!_#|${exec_prefix}/sbin,g -s,@libexecdir@,|#_!!_#|${exec_prefix}/libexec,g -s,@datarootdir@,|#_!!_#|${prefix}/share,g -s,@datadir@,|#_!!_#|${datarootdir},g -s,@sysconfdir@,|#_!!_#|${prefix}/etc,g -s,@sharedstatedir@,|#_!!_#|${prefix}/com,g -s,@localstatedir@,|#_!!_#|${prefix}/var,g -s,@includedir@,|#_!!_#|${prefix}/include,g -s,@oldincludedir@,|#_!!_#|/usr/include,g -s,@docdir@,|#_!!_#|${datarootdir}/doc/${PACKAGE_TARNAME},g -s,@infodir@,|#_!!_#|${datarootdir}/info,g -s,@htmldir@,|#_!!_#|${docdir},g -s,@dvidir@,|#_!!_#|${docdir},g -s,@pdfdir@,|#_!!_#|${docdir},g -s,@psdir@,|#_!!_#|${docdir},g -s,@libdir@,|#_!!_#|${exec_prefix}/lib,g -s,@localedir@,|#_!!_#|${datarootdir}/locale,g -s,@mandir@,|#_!!_#|${datarootdir}/man,g -s,@DEFS@,|#_!!_#|-DHAVE_CONFIG_H,g -s,@ECHO_C@,|#_!!_#|,g -s,@ECHO_N@,|#_!!_#|-n,g -s,@ECHO_T@,|#_!!_#|,g -s,@LIBS@,|#_!!_#|-lncurses -lm ,g -s,@build_alias@,|#_!!_#|,g -s,@host_alias@,|#_!!_#|,g -s,@target_alias@,|#_!!_#|,g -s,@INSTALL_PROGRAM@,|#_!!_#|${INSTALL},g -s,@INSTALL_SCRIPT@,|#_!!_#|${INSTALL},g -s,@INSTALL_DATA@,|#_!!_#|${INSTALL} -m 644,g -s,@am__isrc@,|#_!!_#|,g -s,@CYGPATH_W@,|#_!!_#|echo,g -s,@PACKAGE@,|#_!!_#|htop,g -s,@VERSION@,|#_!!_#|0.9,g -s,@ACLOCAL@,|#_!!_#|${SHELL} /home/pundiramit/linaro/smp/htop-0.9/missing --run aclocal-1.10,g -s,@AUTOCONF@,|#_!!_#|${SHELL} /home/pundiramit/linaro/smp/htop-0.9/missing --run autoconf,g -s,@AUTOMAKE@,|#_!!_#|${SHELL} /home/pundiramit/linaro/smp/htop-0.9/missing --run automake-1.10,g -s,@AUTOHEADER@,|#_!!_#|${SHELL} /home/pundiramit/linaro/smp/htop-0.9/missing --run autoheader,g -s,@MAKEINFO@,|#_!!_#|${SHELL} /home/pundiramit/linaro/smp/htop-0.9/missing --run makeinfo,g -s,@install_sh@,|#_!!_#|$(SHELL) /home/pundiramit/linaro/smp/htop-0.9/install-sh,g -s,@STRIP@,|#_!!_#|strip,g -s,@INSTALL_STRIP_PROGRAM@,|#_!!_#|$(install_sh) -c -s,g -s,@mkdir_p@,|#_!!_#|/bin/mkdir -p,g -s,@AWK@,|#_!!_#|mawk,g -s,@SET_MAKE@,|#_!!_#|,g -s,@am__leading_dot@,|#_!!_#|.,g -s,@AMTAR@,|#_!!_#|${SHELL} /home/pundiramit/linaro/smp/htop-0.9/missing --run tar,g -s,@am__tar@,|#_!!_#|${AMTAR} chof - "$$tardir",g -s,@am__untar@,|#_!!_#|${AMTAR} xf -,g -s,@CC@,|#_!!_#|gcc,g -s,@CFLAGS@,|#_!!_#|-g -O2,g -s,@LDFLAGS@,|#_!!_#|,g -s,@CPPFLAGS@,|#_!!_#|,g -s,@ac_ct_CC@,|#_!!_#|gcc,g -s,@EXEEXT@,|#_!!_#|,g -s,@OBJEXT@,|#_!!_#|o,g -s,@DEPDIR@,|#_!!_#|.deps,g -s,@am__include@,|#_!!_#|include,g -s,@am__quote@,|#_!!_#|,g -s,@AMDEP_TRUE@,|#_!!_#|,g -s,@AMDEP_FALSE@,|#_!!_#|#,g -s,@AMDEPBACKSLASH@,|#_!!_#|\\,g -s,@CCDEPMODE@,|#_!!_#|depmode=gcc3,g -s,@am__fastdepCC_TRUE@,|#_!!_#|,g -s,@am__fastdepCC_FALSE@,|#_!!_#|#,g -s,@LIBTOOL@,|#_!!_#|$(SHELL) $(top_builddir)/libtool,g -s,@build@,|#_!!_#|i686-pc-linux-gnu,g -s,@build_cpu@,|#_!!_#|i686,g -s,@build_vendor@,|#_!!_#|pc,g -s,@build_os@,|#_!!_#|linux-gnu,g -s,@host@,|#_!!_#|i686-pc-linux-gnu,g -s,@host_cpu@,|#_!!_#|i686,g -s,@host_vendor@,|#_!!_#|pc,g -s,@host_os@,|#_!!_#|linux-gnu,g -s,@SED@,|#_!!_#|/bin/sed,g -s,@GREP@,|#_!!_#|/bin/grep,g -s,@EGREP@,|#_!!_#|/bin/grep -E,g -s,@FGREP@,|#_!!_#|/bin/grep -F,g -s,@LD@,|#_!!_#|/usr/bin/ld,g -s,@DUMPBIN@,|#_!!_#|,g -s,@ac_ct_DUMPBIN@,|#_!!_#|,g -s,@NM@,|#_!!_#|/usr/bin/nm -B,g -s,@LN_S@,|#_!!_#|ln -s,g -s,@OBJDUMP@,|#_!!_#|objdump,g -s,@AR@,|#_!!_#|ar,g -s,@RANLIB@,|#_!!_#|ranlib,g -s,@lt_ECHO@,|#_!!_#|echo,g -CEOF -cat >"$tmp/subs-2.sed" <<\CEOF -/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end -s,@DSYMUTIL@,|#_!!_#|,g -s,@NMEDIT@,|#_!!_#|,g -s,@LIPO@,|#_!!_#|,g -s,@OTOOL@,|#_!!_#|,g -s,@OTOOL64@,|#_!!_#|,g -s,@CPP@,|#_!!_#|gcc -E,g -s,@LIBOBJS@,|#_!!_#|,g -s,@LEX@,|#_!!_#|flex,g -s,@LEX_OUTPUT_ROOT@,|#_!!_#|lex.yy,g -s,@LEXLIB@,|#_!!_#|-lfl,g -s,@YACC@,|#_!!_#|bison -y,g -s,@YFLAGS@,|#_!!_#|,g -s,@PLPA_BUILD_STANDALONE_TRUE@,|#_!!_#|#,g -s,@PLPA_BUILD_STANDALONE_FALSE@,|#_!!_#|,g -s,@PLPA_BUILD_EXECUTABLES_TRUE@,|#_!!_#|#,g -s,@PLPA_BUILD_EXECUTABLES_FALSE@,|#_!!_#|,g -s,@HAVE_PLPA_TRUE@,|#_!!_#|,g -s,@HAVE_PLPA_FALSE@,|#_!!_#|#,g -s,@LTLIBOBJS@,|#_!!_#|,g -:end -s/|#_!!_#|//g -CEOF -fi # test -n "$CONFIG_FILES" - - -for ac_tag in :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS -do - case $ac_tag in - :[FHLC]) ac_mode=$ac_tag; continue;; - esac - case $ac_mode$ac_tag in - :[FHL]*:*);; - :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5 -echo "$as_me: error: Invalid tag $ac_tag." >&2;} - { (exit 1); exit 1; }; };; - :[FH]-) ac_tag=-:-;; - :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; - esac - ac_save_IFS=$IFS - IFS=: - set x $ac_tag - IFS=$ac_save_IFS - shift - ac_file=$1 - shift - - case $ac_mode in - :L) ac_source=$1;; - :[FH]) - ac_file_inputs= - for ac_f - do - case $ac_f in - -) ac_f="$tmp/stdin";; - *) # Look for the file first in the build tree, then in the source tree - # (if the path is not absolute). The absolute path cannot be DOS-style, - # because $ac_f cannot contain `:'. - test -f "$ac_f" || - case $ac_f in - [\\/$]*) false;; - *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; - esac || - { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5 -echo "$as_me: error: cannot find input file: $ac_f" >&2;} - { (exit 1); exit 1; }; };; - esac - ac_file_inputs="$ac_file_inputs $ac_f" - done - - # Let's still pretend it is `configure' which instantiates (i.e., don't - # use $as_me), people would be surprised to read: - # /* config.h. Generated by config.status. */ - configure_input="Generated from "`IFS=: - echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure." - if test x"$ac_file" != x-; then - configure_input="$ac_file. $configure_input" - { echo "$as_me:$LINENO: creating $ac_file" >&5 -echo "$as_me: creating $ac_file" >&6;} - fi - - case $ac_tag in - *:-:* | *:-) cat >"$tmp/stdin";; - esac - ;; - esac - - ac_dir=`$as_dirname -- "$ac_file" || -$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$ac_file" : 'X\(//\)[^/]' \| \ - X"$ac_file" : 'X\(//\)$' \| \ - X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || -echo X"$ac_file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - { as_dir="$ac_dir" - case $as_dir in #( - -*) as_dir=./$as_dir;; - esac - test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { - as_dirs= - while :; do - case $as_dir in #( - *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( - *) as_qdir=$as_dir;; - esac - as_dirs="'$as_qdir' $as_dirs" - as_dir=`$as_dirname -- "$as_dir" || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - test -d "$as_dir" && break - done - test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 -echo "$as_me: error: cannot create directory $as_dir" >&2;} - { (exit 1); exit 1; }; }; } - ac_builddir=. - -case "$ac_dir" in -.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -*) - ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` - # A ".." for each directory in $ac_dir_suffix. - ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` - case $ac_top_builddir_sub in - "") ac_top_builddir_sub=. ac_top_build_prefix= ;; - *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; - esac ;; -esac -ac_abs_top_builddir=$ac_pwd -ac_abs_builddir=$ac_pwd$ac_dir_suffix -# for backward compatibility: -ac_top_builddir=$ac_top_build_prefix - -case $srcdir in - .) # We are building in place. - ac_srcdir=. - ac_top_srcdir=$ac_top_builddir_sub - ac_abs_top_srcdir=$ac_pwd ;; - [\\/]* | ?:[\\/]* ) # Absolute name. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir - ac_abs_top_srcdir=$srcdir ;; - *) # Relative name. - ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_build_prefix$srcdir - ac_abs_top_srcdir=$ac_pwd/$srcdir ;; -esac -ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix - - - case $ac_mode in - :F) - # - # CONFIG_FILE - # - - case $INSTALL in - [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; - *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; - esac - ac_MKDIR_P=$MKDIR_P - case $MKDIR_P in - [\\/$]* | ?:[\\/]* ) ;; - */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; - esac -# If the template does not know about datarootdir, expand it. -# FIXME: This hack should be removed a few years after 2.60. -ac_datarootdir_hack=; ac_datarootdir_seen= - -case `sed -n '/datarootdir/ { - p - q -} -/@datadir@/p -/@docdir@/p -/@infodir@/p -/@localedir@/p -/@mandir@/p -' $ac_file_inputs` in -*datarootdir*) ac_datarootdir_seen=yes;; -*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) - { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 -echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} - ac_datarootdir_hack=' - s&@datadir@&${datarootdir}&g - s&@docdir@&${datarootdir}/doc/${PACKAGE_TARNAME}&g - s&@infodir@&${datarootdir}/info&g - s&@localedir@&${datarootdir}/locale&g - s&@mandir@&${datarootdir}/man&g - s&\${datarootdir}&${prefix}/share&g' ;; -esac - sed "/^[ ]*VPATH[ ]*=/{ -s/:*\$(srcdir):*/:/ -s/:*\${srcdir}:*/:/ -s/:*@srcdir@:*/:/ -s/^\([^=]*=[ ]*\):*/\1/ -s/:*$// -s/^[^=]*=[ ]*$// -} - -:t -/@[a-zA-Z_][a-zA-Z_0-9]*@/!b -s&@configure_input@&$configure_input&;t t -s&@top_builddir@&$ac_top_builddir_sub&;t t -s&@srcdir@&$ac_srcdir&;t t -s&@abs_srcdir@&$ac_abs_srcdir&;t t -s&@top_srcdir@&$ac_top_srcdir&;t t -s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t -s&@builddir@&$ac_builddir&;t t -s&@abs_builddir@&$ac_abs_builddir&;t t -s&@abs_top_builddir@&$ac_abs_top_builddir&;t t -s&@INSTALL@&$ac_INSTALL&;t t -s&@MKDIR_P@&$ac_MKDIR_P&;t t -$ac_datarootdir_hack -" $ac_file_inputs | sed -f "$tmp/subs-1.sed" | sed -f "$tmp/subs-2.sed" >$tmp/out - -test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && - { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && - { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && - { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined." >&5 -echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined." >&2;} - - rm -f "$tmp/stdin" - case $ac_file in - -) cat "$tmp/out"; rm -f "$tmp/out";; - *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;; - esac - ;; - :H) - # - # CONFIG_HEADER - # - # First, check the format of the line: - cat >"$tmp/defines.sed" <<\CEOF -/^[ ]*#[ ]*undef[ ][ ]*[_abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ][_abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789]*[ ]*$/b def -/^[ ]*#[ ]*define[ ][ ]*[_abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ][_abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789]*[( ]/b def -b -:def -s/$/ / -s,^\([ #]*\)[^ ]*\([ ]*PACKAGE_NAME\)[ (].*,\1define\2 "htop" , -s,^\([ #]*\)[^ ]*\([ ]*PACKAGE_TARNAME\)[ (].*,\1define\2 "htop" , -s,^\([ #]*\)[^ ]*\([ ]*PACKAGE_VERSION\)[ (].*,\1define\2 "0.9" , -s,^\([ #]*\)[^ ]*\([ ]*PACKAGE_STRING\)[ (].*,\1define\2 "htop 0.9" , -s,^\([ #]*\)[^ ]*\([ ]*PACKAGE_BUGREPORT\)[ (].*,\1define\2 "loderunner@users.sourceforge.net" , -s,^\([ #]*\)[^ ]*\([ ]*PACKAGE\)[ (].*,\1define\2 "htop" , -s,^\([ #]*\)[^ ]*\([ ]*VERSION\)[ (].*,\1define\2 "0.9" , -s,^\([ #]*\)[^ ]*\([ ]*STDC_HEADERS\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*HAVE_SYS_TYPES_H\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*HAVE_SYS_STAT_H\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*HAVE_STDLIB_H\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*HAVE_STRING_H\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*HAVE_MEMORY_H\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*HAVE_STRINGS_H\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*HAVE_INTTYPES_H\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*HAVE_STDINT_H\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*HAVE_UNISTD_H\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*HAVE_DLFCN_H\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*LT_OBJDIR\)[ (].*,\1define\2 ".libs/" , -s,^\([ #]*\)[^ ]*\([ ]*HAVE_LIBM\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*HAVE_DIRENT_H\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*STDC_HEADERS\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*HAVE_STDLIB_H\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*HAVE_STRING_H\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*HAVE_STRINGS_H\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*HAVE_SYS_PARAM_H\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*HAVE_SYS_TIME_H\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*HAVE_UNISTD_H\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*HAVE_CURSES_H\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*HAVE__BOOL\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*HAVE_STDBOOL_H\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*HAVE_STDLIB_H\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*HAVE_MALLOC\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*HAVE_STDLIB_H\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*HAVE_REALLOC\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*RETSIGTYPE\)[ (].*,\1define\2 void , -s,^\([ #]*\)[^ ]*\([ ]*LSTAT_FOLLOWS_SLASHED_SYMLINK\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*HAVE_MEMMOVE\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*HAVE_STRNCASECMP\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*HAVE_STRSTR\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*HAVE_STRDUP\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*PROCDIR\)[ (].*,\1define\2 "/proc" , -s,^\([ #]*\)[^ ]*\([ ]*HAVE_TASKSTATS\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*HAVE_LIBNCURSES\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*HAVE_CURSES_H\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*YYTEXT_POINTER\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*PLPA_DEBUG\)[ (].*,\1define\2 0 , -s,^\([ #]*\)[^ ]*\([ ]*PLPA_SYM_PREFIX\)[ (].*,\1define\2 plpa_ , -s,^\([ #]*\)[^ ]*\([ ]*PLPA_SYM_PREFIX_CAPS\)[ (].*,\1define\2 PLPA_ , -CEOF - sed -f "$tmp/defines.sed" $ac_file_inputs >"$tmp/out1" - # First, check the format of the line: - cat >"$tmp/defines.sed" <<\CEOF -/^[ ]*#[ ]*undef[ ][ ]*[_abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ][_abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789]*[ ]*$/b def -/^[ ]*#[ ]*define[ ][ ]*[_abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ][_abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789]*[( ]/b def -b -:def -s,^\([ #]*\)[^ ]*\([ ]*PLPA_WANT_VALGRIND_SUPPORT\)[ (].*,\1define\2 0 , -s,^\([ #]*\)[^ ]*\([ ]*HAVE_PLPA\)[ (].*,\1define\2 1 , -s/ $// -s,^[ #]*u.*,/* & */, -CEOF - sed -f "$tmp/defines.sed" "$tmp/out1" >"$tmp/out2" -ac_result="$tmp/out2" - if test x"$ac_file" != x-; then - echo "/* $configure_input */" >"$tmp/config.h" - cat "$ac_result" >>"$tmp/config.h" - if diff $ac_file "$tmp/config.h" >/dev/null 2>&1; then - { echo "$as_me:$LINENO: $ac_file is unchanged" >&5 -echo "$as_me: $ac_file is unchanged" >&6;} - else - rm -f $ac_file - mv "$tmp/config.h" $ac_file - fi - else - echo "/* $configure_input */" - cat "$ac_result" - fi - rm -f "$tmp/out12" -# Compute $ac_file's index in $config_headers. -_am_stamp_count=1 -for _am_header in $config_headers :; do - case $_am_header in - $ac_file | $ac_file:* ) - break ;; - * ) - _am_stamp_count=`expr $_am_stamp_count + 1` ;; - esac -done -echo "timestamp for $ac_file" >`$as_dirname -- $ac_file || -$as_expr X$ac_file : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X$ac_file : 'X\(//\)[^/]' \| \ - X$ac_file : 'X\(//\)$' \| \ - X$ac_file : 'X\(/\)' \| . 2>/dev/null || -echo X$ac_file | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'`/stamp-h$_am_stamp_count - ;; - - :C) { echo "$as_me:$LINENO: executing $ac_file commands" >&5 -echo "$as_me: executing $ac_file commands" >&6;} - ;; - esac - - - case $ac_file$ac_mode in - "depfiles":C) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do - # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named `Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # Grep'ing the whole file is not good either: AIX grep has a line - # limit of 2048, but all sed's we know have understand at least 4000. - if sed 10q "$mf" | grep '^#.*generated by automake' > /dev/null 2>&1; then - dirpart=`$as_dirname -- "$mf" || -$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$mf" : 'X\(//\)[^/]' \| \ - X"$mf" : 'X\(//\)$' \| \ - X"$mf" : 'X\(/\)' \| . 2>/dev/null || -echo X"$mf" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - else - continue - fi - # Extract the definition of DEPDIR, am__include, and am__quote - # from the Makefile without running `make'. - DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` - test -z "$DEPDIR" && continue - am__include=`sed -n 's/^am__include = //p' < "$mf"` - test -z "am__include" && continue - am__quote=`sed -n 's/^am__quote = //p' < "$mf"` - # When using ansi2knr, U may be empty or an underscore; expand it - U=`sed -n 's/^U = //p' < "$mf"` - # Find all dependency output files, they are included files with - # $(DEPDIR) in their names. We invoke sed twice because it is the - # simplest approach to changing $(DEPDIR) to its actual value in the - # expansion. - for file in `sed -n " - s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`$as_dirname -- "$file" || -$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$file" : 'X\(//\)[^/]' \| \ - X"$file" : 'X\(//\)$' \| \ - X"$file" : 'X\(/\)' \| . 2>/dev/null || -echo X"$file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - { as_dir=$dirpart/$fdir - case $as_dir in #( - -*) as_dir=./$as_dir;; - esac - test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { - as_dirs= - while :; do - case $as_dir in #( - *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( - *) as_qdir=$as_dir;; - esac - as_dirs="'$as_qdir' $as_dirs" - as_dir=`$as_dirname -- "$as_dir" || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - test -d "$as_dir" && break - done - test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 -echo "$as_me: error: cannot create directory $as_dir" >&2;} - { (exit 1); exit 1; }; }; } - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" - done -done - ;; - "libtool":C) - - # See if we are running on zsh, and set the options which allow our - # commands through without removal of \ escapes. - if test -n "${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST - fi - - cfgfile="${ofile}T" - trap "$RM \"$cfgfile\"; exit 1" 1 2 15 - $RM "$cfgfile" - - cat <<_LT_EOF >> "$cfgfile" -#! $SHELL - -# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. -# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION -# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: -# NOTE: Changes made to this file will be lost: look at ltmain.sh. -# -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, -# 2006, 2007, 2008 Free Software Foundation, Inc. -# Written by Gordon Matzigkeit, 1996 -# -# This file is part of GNU Libtool. -# -# GNU Libtool is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# As a special exception to the GNU General Public License, -# if you distribute this file as part of a program or library that -# is built using GNU Libtool, you may include this file under the -# same distribution terms that you use for the rest of that program. -# -# GNU Libtool is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with GNU Libtool; see the file COPYING. If not, a copy -# can be downloaded from http://www.gnu.org/licenses/gpl.html, or -# obtained by writing to the Free Software Foundation, Inc., -# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. - - -# The names of the tagged configurations supported by this script. -available_tags="" - -# ### BEGIN LIBTOOL CONFIG - -# Whether or not to build shared libraries. -build_libtool_libs=$enable_shared - -# Whether or not to build static libraries. -build_old_libs=$enable_static - -# Which release of libtool.m4 was used? -macro_version=$macro_version -macro_revision=$macro_revision - -# What type of objects to build. -pic_mode=$pic_mode - -# Whether or not to optimize for fast installation. -fast_install=$enable_fast_install - -# The host system. -host_alias=$host_alias -host=$host -host_os=$host_os - -# The build system. -build_alias=$build_alias -build=$build -build_os=$build_os - -# A sed program that does not truncate output. -SED=$lt_SED - -# Sed that helps us avoid accidentally triggering echo(1) options like -n. -Xsed="\$SED -e 1s/^X//" - -# A grep program that handles long lines. -GREP=$lt_GREP - -# An ERE matcher. -EGREP=$lt_EGREP - -# A literal string matcher. -FGREP=$lt_FGREP - -# A BSD- or MS-compatible name lister. -NM=$lt_NM - -# Whether we need soft or hard links. -LN_S=$lt_LN_S - -# What is the maximum length of a command? -max_cmd_len=$max_cmd_len - -# Object file suffix (normally "o"). -objext=$ac_objext - -# Executable file suffix (normally ""). -exeext=$exeext - -# whether the shell understands "unset". -lt_unset=$lt_unset - -# turn spaces into newlines. -SP2NL=$lt_lt_SP2NL - -# turn newlines into spaces. -NL2SP=$lt_lt_NL2SP - -# How to create reloadable object files. -reload_flag=$lt_reload_flag -reload_cmds=$lt_reload_cmds - -# An object symbol dumper. -OBJDUMP=$lt_OBJDUMP - -# Method to check whether dependent libraries are shared objects. -deplibs_check_method=$lt_deplibs_check_method - -# Command to use when deplibs_check_method == "file_magic". -file_magic_cmd=$lt_file_magic_cmd - -# The archiver. -AR=$lt_AR -AR_FLAGS=$lt_AR_FLAGS - -# A symbol stripping program. -STRIP=$lt_STRIP - -# Commands used to install an old-style archive. -RANLIB=$lt_RANLIB -old_postinstall_cmds=$lt_old_postinstall_cmds -old_postuninstall_cmds=$lt_old_postuninstall_cmds - -# A C compiler. -LTCC=$lt_CC - -# LTCC compiler flags. -LTCFLAGS=$lt_CFLAGS - -# Take the output of nm and produce a listing of raw symbols and C names. -global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe - -# Transform the output of nm in a proper C declaration. -global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl - -# Transform the output of nm in a C name address pair. -global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address - -# Transform the output of nm in a C name address pair when lib prefix is needed. -global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix - -# The name of the directory that contains temporary libtool files. -objdir=$objdir - -# Shell to use when invoking shell scripts. -SHELL=$lt_SHELL - -# An echo program that does not interpret backslashes. -ECHO=$lt_ECHO - -# Used to examine libraries when file_magic_cmd begins with "file". -MAGIC_CMD=$MAGIC_CMD - -# Must we lock files when doing compilation? -need_locks=$lt_need_locks - -# Tool to manipulate archived DWARF debug symbol files on Mac OS X. -DSYMUTIL=$lt_DSYMUTIL - -# Tool to change global to local symbols on Mac OS X. -NMEDIT=$lt_NMEDIT - -# Tool to manipulate fat objects and archives on Mac OS X. -LIPO=$lt_LIPO - -# ldd/readelf like tool for Mach-O binaries on Mac OS X. -OTOOL=$lt_OTOOL - -# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4. -OTOOL64=$lt_OTOOL64 - -# Old archive suffix (normally "a"). -libext=$libext - -# Shared library suffix (normally ".so"). -shrext_cmds=$lt_shrext_cmds - -# The commands to extract the exported symbol list from a shared archive. -extract_expsyms_cmds=$lt_extract_expsyms_cmds - -# Variables whose values should be saved in libtool wrapper scripts and -# restored at link time. -variables_saved_for_relink=$lt_variables_saved_for_relink - -# Do we need the "lib" prefix for modules? -need_lib_prefix=$need_lib_prefix - -# Do we need a version for libraries? -need_version=$need_version - -# Library versioning type. -version_type=$version_type - -# Shared library runtime path variable. -runpath_var=$runpath_var - -# Shared library path variable. -shlibpath_var=$shlibpath_var - -# Is shlibpath searched before the hard-coded library search path? -shlibpath_overrides_runpath=$shlibpath_overrides_runpath - -# Format of library name prefix. -libname_spec=$lt_libname_spec - -# List of archive names. First name is the real one, the rest are links. -# The last name is the one that the linker finds with -lNAME -library_names_spec=$lt_library_names_spec - -# The coded name of the library, if different from the real name. -soname_spec=$lt_soname_spec - -# Command to use after installation of a shared archive. -postinstall_cmds=$lt_postinstall_cmds - -# Command to use after uninstallation of a shared archive. -postuninstall_cmds=$lt_postuninstall_cmds - -# Commands used to finish a libtool library installation in a directory. -finish_cmds=$lt_finish_cmds - -# As "finish_cmds", except a single script fragment to be evaled but -# not shown. -finish_eval=$lt_finish_eval - -# Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs - -# Compile-time system search path for libraries. -sys_lib_search_path_spec=$lt_sys_lib_search_path_spec - -# Run-time system search path for libraries. -sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec - -# Whether dlopen is supported. -dlopen_support=$enable_dlopen - -# Whether dlopen of programs is supported. -dlopen_self=$enable_dlopen_self - -# Whether dlopen of statically linked programs is supported. -dlopen_self_static=$enable_dlopen_self_static - -# Commands to strip libraries. -old_striplib=$lt_old_striplib -striplib=$lt_striplib - - -# The linker used to build libraries. -LD=$lt_LD - -# Commands used to build an old-style archive. -old_archive_cmds=$lt_old_archive_cmds - -# A language specific compiler. -CC=$lt_compiler - -# Is the compiler the GNU compiler? -with_gcc=$GCC - -# Compiler flag to turn off builtin functions. -no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag - -# How to pass a linker flag through the compiler. -wl=$lt_lt_prog_compiler_wl - -# Additional compiler flags for building library objects. -pic_flag=$lt_lt_prog_compiler_pic - -# Compiler flag to prevent dynamic linking. -link_static_flag=$lt_lt_prog_compiler_static - -# Does compiler simultaneously support -c and -o options? -compiler_c_o=$lt_lt_cv_prog_compiler_c_o - -# Whether or not to add -lc for building shared libraries. -build_libtool_need_lc=$archive_cmds_need_lc - -# Whether or not to disallow shared libs when runtime libs are static. -allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes - -# Compiler flag to allow reflexive dlopens. -export_dynamic_flag_spec=$lt_export_dynamic_flag_spec - -# Compiler flag to generate shared objects directly from archives. -whole_archive_flag_spec=$lt_whole_archive_flag_spec - -# Whether the compiler copes with passing no objects directly. -compiler_needs_object=$lt_compiler_needs_object - -# Create an old-style archive from a shared archive. -old_archive_from_new_cmds=$lt_old_archive_from_new_cmds - -# Create a temporary old-style archive to link instead of a shared archive. -old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds - -# Commands used to build a shared archive. -archive_cmds=$lt_archive_cmds -archive_expsym_cmds=$lt_archive_expsym_cmds - -# Commands used to build a loadable module if different from building -# a shared archive. -module_cmds=$lt_module_cmds -module_expsym_cmds=$lt_module_expsym_cmds - -# Whether we are building with GNU ld or not. -with_gnu_ld=$lt_with_gnu_ld - -# Flag that allows shared libraries with undefined symbols to be built. -allow_undefined_flag=$lt_allow_undefined_flag - -# Flag that enforces no undefined symbols. -no_undefined_flag=$lt_no_undefined_flag - -# Flag to hardcode \$libdir into a binary during linking. -# This must work even if \$libdir does not exist -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec - -# If ld is used when linking, flag to hardcode \$libdir into a binary -# during linking. This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld - -# Whether we need a single "-rpath" flag with a separated argument. -hardcode_libdir_separator=$lt_hardcode_libdir_separator - -# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes -# DIR into the resulting binary. -hardcode_direct=$hardcode_direct - -# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes -# DIR into the resulting binary and the resulting library dependency is -# "absolute",i.e impossible to change by setting \${shlibpath_var} if the -# library is relocated. -hardcode_direct_absolute=$hardcode_direct_absolute - -# Set to "yes" if using the -LDIR flag during linking hardcodes DIR -# into the resulting binary. -hardcode_minus_L=$hardcode_minus_L - -# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR -# into the resulting binary. -hardcode_shlibpath_var=$hardcode_shlibpath_var - -# Set to "yes" if building a shared library automatically hardcodes DIR -# into the library and all subsequent libraries and executables linked -# against it. -hardcode_automatic=$hardcode_automatic - -# Set to yes if linker adds runtime paths of dependent libraries -# to runtime path list. -inherit_rpath=$inherit_rpath - -# Whether libtool must link a program against all its dependency libraries. -link_all_deplibs=$link_all_deplibs - -# Fix the shell variable \$srcfile for the compiler. -fix_srcfile_path=$lt_fix_srcfile_path - -# Set to "yes" if exported symbols are required. -always_export_symbols=$always_export_symbols - -# The commands to list exported symbols. -export_symbols_cmds=$lt_export_symbols_cmds - -# Symbols that should not be listed in the preloaded symbols. -exclude_expsyms=$lt_exclude_expsyms - -# Symbols that must always be exported. -include_expsyms=$lt_include_expsyms - -# Commands necessary for linking programs (against libraries) with templates. -prelink_cmds=$lt_prelink_cmds - -# Specify filename containing input files. -file_list_spec=$lt_file_list_spec - -# How to hardcode a shared library path into an executable. -hardcode_action=$hardcode_action - -# ### END LIBTOOL CONFIG - -_LT_EOF - - case $host_os in - aix3*) - cat <<\_LT_EOF >> "$cfgfile" -# AIX sometimes has problems with the GCC collect2 program. For some -# reason, if we set the COLLECT_NAMES environment variable, the problems -# vanish in a puff of smoke. -if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES -fi -_LT_EOF - ;; - esac - - -ltmain="$ac_aux_dir/ltmain.sh" - - - # We use sed instead of cat because bash on DJGPP gets confused if - # if finds mixed CR/LF and LF-only lines. Since sed operates in - # text mode, it properly converts lines to CR/LF. This bash problem - # is reportedly fixed, but why not run on old versions too? - sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \ - || (rm -f "$cfgfile"; exit 1) - - case $xsi_shell in - yes) - cat << \_LT_EOF >> "$cfgfile" - -# func_dirname file append nondir_replacement -# Compute the dirname of FILE. If nonempty, add APPEND to the result, -# otherwise set result to NONDIR_REPLACEMENT. -func_dirname () -{ - case ${1} in - */*) func_dirname_result="${1%/*}${2}" ;; - * ) func_dirname_result="${3}" ;; - esac -} - -# func_basename file -func_basename () -{ - func_basename_result="${1##*/}" -} - -# func_dirname_and_basename file append nondir_replacement -# perform func_basename and func_dirname in a single function -# call: -# dirname: Compute the dirname of FILE. If nonempty, -# add APPEND to the result, otherwise set result -# to NONDIR_REPLACEMENT. -# value returned in "$func_dirname_result" -# basename: Compute filename of FILE. -# value retuned in "$func_basename_result" -# Implementation must be kept synchronized with func_dirname -# and func_basename. For efficiency, we do not delegate to -# those functions but instead duplicate the functionality here. -func_dirname_and_basename () -{ - case ${1} in - */*) func_dirname_result="${1%/*}${2}" ;; - * ) func_dirname_result="${3}" ;; - esac - func_basename_result="${1##*/}" -} - -# func_stripname prefix suffix name -# strip PREFIX and SUFFIX off of NAME. -# PREFIX and SUFFIX must not contain globbing or regex special -# characters, hashes, percent signs, but SUFFIX may contain a leading -# dot (in which case that matches only a dot). -func_stripname () -{ - # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are - # positional parameters, so assign one to ordinary parameter first. - func_stripname_result=${3} - func_stripname_result=${func_stripname_result#"${1}"} - func_stripname_result=${func_stripname_result%"${2}"} -} - -# func_opt_split -func_opt_split () -{ - func_opt_split_opt=${1%%=*} - func_opt_split_arg=${1#*=} -} - -# func_lo2o object -func_lo2o () -{ - case ${1} in - *.lo) func_lo2o_result=${1%.lo}.${objext} ;; - *) func_lo2o_result=${1} ;; - esac -} - -# func_xform libobj-or-source -func_xform () -{ - func_xform_result=${1%.*}.lo -} - -# func_arith arithmetic-term... -func_arith () -{ - func_arith_result=$(( $* )) -} - -# func_len string -# STRING may not start with a hyphen. -func_len () -{ - func_len_result=${#1} -} - -_LT_EOF - ;; - *) # Bourne compatible functions. - cat << \_LT_EOF >> "$cfgfile" - -# func_dirname file append nondir_replacement -# Compute the dirname of FILE. If nonempty, add APPEND to the result, -# otherwise set result to NONDIR_REPLACEMENT. -func_dirname () -{ - # Extract subdirectory from the argument. - func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"` - if test "X$func_dirname_result" = "X${1}"; then - func_dirname_result="${3}" - else - func_dirname_result="$func_dirname_result${2}" - fi -} - -# func_basename file -func_basename () -{ - func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"` -} - - -# func_stripname prefix suffix name -# strip PREFIX and SUFFIX off of NAME. -# PREFIX and SUFFIX must not contain globbing or regex special -# characters, hashes, percent signs, but SUFFIX may contain a leading -# dot (in which case that matches only a dot). -# func_strip_suffix prefix name -func_stripname () -{ - case ${2} in - .*) func_stripname_result=`$ECHO "X${3}" \ - | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;; - *) func_stripname_result=`$ECHO "X${3}" \ - | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;; - esac -} - -# sed scripts: -my_sed_long_opt='1s/^\(-[^=]*\)=.*/\1/;q' -my_sed_long_arg='1s/^-[^=]*=//' - -# func_opt_split -func_opt_split () -{ - func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"` - func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"` -} - -# func_lo2o object -func_lo2o () -{ - func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"` -} - -# func_xform libobj-or-source -func_xform () -{ - func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[^.]*$/.lo/'` -} - -# func_arith arithmetic-term... -func_arith () -{ - func_arith_result=`expr "$@"` -} - -# func_len string -# STRING may not start with a hyphen. -func_len () -{ - func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len` -} - -_LT_EOF -esac - -case $lt_shell_append in - yes) - cat << \_LT_EOF >> "$cfgfile" - -# func_append var value -# Append VALUE to the end of shell variable VAR. -func_append () -{ - eval "$1+=\$2" -} -_LT_EOF - ;; - *) - cat << \_LT_EOF >> "$cfgfile" - -# func_append var value -# Append VALUE to the end of shell variable VAR. -func_append () -{ - eval "$1=\$$1\$2" -} - -_LT_EOF - ;; - esac - - - sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \ - || (rm -f "$cfgfile"; exit 1) - - mv -f "$cfgfile" "$ofile" || - (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") - chmod +x "$ofile" - - ;; - - esac -done # for ac_tag - - -{ (exit 0); exit 0; } |