path: root/neuralnetworks/1.3/IPreparedModel.hal

/*
 * Copyright (C) 2019 The Android Open Source Project
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

package android.hardware.neuralnetworks@1.3;

import @1.2::IPreparedModel;
import @1.2::MeasureTiming;
import @1.2::OutputShape;
import @1.2::Timing;
import ErrorStatus;
import OptionalTimeoutDuration;
import OptionalTimePoint;
import Request;
import IExecutionCallback;
import IFencedExecutionCallback;

/**
 * IPreparedModel describes a model that has been prepared for execution and
 * is used to launch executions.
 */
interface IPreparedModel extends @1.2::IPreparedModel {
    /**
     * Launches an asynchronous execution on a prepared model.
     *
     * The execution is performed asynchronously with respect to the caller.
     * execute_1_3 must verify the inputs to the function are correct, and the usages
     * of memory pools allocated by IDevice::allocate are valid. If there is
     * an error, execute_1_3 must immediately invoke the callback with the
     * appropriate ErrorStatus value, then return with the same ErrorStatus. If
     * the inputs to the function are valid and there is no error, execute_1_3 must
     * launch an asynchronous task to perform the execution in the background,
     * and immediately return with ErrorStatus::NONE. If the asynchronous task
     * fails to launch, execute_1_3 must immediately invoke the callback with
     * ErrorStatus::GENERAL_FAILURE, then return with
     * ErrorStatus::GENERAL_FAILURE.
     *
     * When the asynchronous task has finished its execution, it must
     * immediately invoke the callback object provided as an input to the
     * execute_1_3 function. This callback must be provided with the ErrorStatus of
     * the execution.
     *
     * If the launch is successful, the caller must not change the content of
     * any data object referenced by 'request' (described by the
     * {@link @1.0::DataLocation} of a {@link @1.0::RequestArgument}) until the
     * asynchronous task has invoked the callback object. The asynchronous task
     * must not change the content of any of the data objects corresponding to
     * 'request' inputs.
     *
     * If the prepared model was prepared from a model wherein all tensor
     * operands have fully specified dimensions, and the inputs to the function
     * are valid, then:
     * - the execution should launch successfully (ErrorStatus::NONE): There
     *   must be no failure unless the device itself is in a bad state.
     * - if at execution time every operation's input operands have legal
     *   values, the execution should complete successfully (ErrorStatus::NONE):
     *   There must be no failure unless the device itself is in a bad state.
     *
     * execute_1_3 can be called with an optional deadline. If the execution
     * is not able to be completed before the provided deadline, the execution
     * may be aborted, and either {@link
     * ErrorStatus::MISSED_DEADLINE_TRANSIENT} or {@link
     * ErrorStatus::MISSED_DEADLINE_PERSISTENT} may be returned. The error due
     * to an abort must be sent the same way as other errors, described above.
     *
     * Any number of calls to the execute* and executeSynchronously* functions,
     * in any combination, may be made concurrently, even on the same
     * IPreparedModel object.
     *
     * @param request The input and output information on which the prepared
     *                model is to be executed.
     * @param measure Specifies whether or not to measure duration of the execution.
     *                The duration runs from the time the driver sees the call
     *                to the execute_1_3 function to the time the driver invokes
     *                the callback.
     * @param deadline The time by which the execution is expected to complete.
     *                 If the execution cannot be completed by the deadline, the
     *                 execution may be aborted.
     * @param loopTimeoutDuration The maximum amount of time that should be spent
     *                            executing a {@link OperationType::WHILE}
     *                            operation. If a loop condition model does not
     *                            output false within this duration, the
     *                            execution must be aborted. If the model
     *                            contains a {@link OperationType::WHILE}
     *                            operation and no loop timeout duration is
     *                            provided, the maximum amount of time is {@link
     *                            LoopTimeoutDurationNs::DEFAULT}. When
     *                            provided, the duration must not exceed {@link
     *                            LoopTimeoutDurationNs::MAXIMUM}.
     * @param callback A callback object used to return the error status of
     *                 the execution, shape information of model output operands, and
     *                 duration of execution. The callback object's notify function must
     *                 be called exactly once, even if the execution was
     *                 unsuccessful.
     * @return status Error status of the call, must be:
     *                - NONE if task is successfully launched
     *                - DEVICE_UNAVAILABLE if driver is offline or busy
     *                - GENERAL_FAILURE if there is an unspecified error
     *                - OUTPUT_INSUFFICIENT_SIZE if provided output buffer is
     *                  not large enough to store the resultant values
     *                - INVALID_ARGUMENT if one of the input arguments is
     *                  invalid
     *                - MISSED_DEADLINE_* if the execution is aborted because it
     *                  cannot be completed by the deadline
     *                - RESOURCE_EXHAUSTED_* if the task was aborted by the
     *                  driver
     */
    execute_1_3(Request request, MeasureTiming measure, OptionalTimePoint deadline,
                OptionalTimeoutDuration loopTimeoutDuration, IExecutionCallback callback)
        generates (ErrorStatus status);

    /**
     * Performs a synchronous execution on a prepared model.
     *
     * The execution is performed synchronously with respect to the caller.
     * executeSynchronously_1_3 must verify the inputs to the function are
     * correct, and the usages of memory pools allocated by IDevice::allocate
     * are valid. If there is an error, executeSynchronously_1_3 must immediately
     * return with the appropriate ErrorStatus value. If the inputs to the
     * function are valid and there is no error, executeSynchronously_1_3 must
     * perform the execution, and must not return until the execution is
     * complete.
     *
     * The caller must not change the content of any data object referenced by
     * 'request' (described by the {@link @1.0::DataLocation} of a
     * {@link @1.0::RequestArgument}) until executeSynchronously_1_3
     * returns. executeSynchronously_1_3 must not change the content of any of the
     * data objects corresponding to 'request' inputs.
     *
     * If the prepared model was prepared from a model wherein all tensor
     * operands have fully specified dimensions, and the inputs to the function
     * are valid, and at execution time every operation's input operands have
     * legal values, then the execution should complete successfully
     * (ErrorStatus::NONE): There must be no failure unless the device itself is
     * in a bad state.
     *
     * executeSynchronously_1_3 may be called with an optional deadline. If the
     * execution is not able to be completed before the provided deadline, the
     * execution may be aborted, and either {@link
     * ErrorStatus::MISSED_DEADLINE_TRANSIENT} or {@link
     * ErrorStatus::MISSED_DEADLINE_PERSISTENT} may be returned. The error due
     * to an abort must be sent the same way as other errors, described above.
     *
     * Any number of calls to the execute* and executeSynchronously* functions,
     * in any combination, may be made concurrently, even on the same
     * IPreparedModel object.
     *
     * @param request The input and output information on which the prepared
     *                model is to be executed.
     * @param measure Specifies whether or not to measure duration of the execution.
     *                The duration runs from the time the driver sees the call
     *                to the executeSynchronously_1_3 function to the time the driver
     *                returns from the function.
     * @param deadline The time by which the execution is expected to complete.
     *                 If the execution cannot be finished by the deadline, the
     *                 execution may be aborted.
     * @param loopTimeoutDuration The maximum amount of time that should be spent
     *                            executing a {@link OperationType::WHILE}
     *                            operation. If a loop condition model does not
     *                            output false within this duration, the
     *                            execution must be aborted. If the model
     *                            contains a {@link OperationType::WHILE}
     *                            operation and no loop timeout duration is
     *                            provided, the maximum amount of time is {@link
     *                            LoopTimeoutDurationNs::DEFAULT}. When
     *                            provided, the duration must not exceed {@link
     *                            LoopTimeoutDurationNs::MAXIMUM}.
     * @return status Error status of the execution, must be:
     *                - NONE if execution is performed successfully
     *                - DEVICE_UNAVAILABLE if driver is offline or busy
     *                - GENERAL_FAILURE if there is an unspecified error
     *                - OUTPUT_INSUFFICIENT_SIZE if at least one output
     *                  operand buffer is not large enough to store the
     *                  corresponding output
     *                - INVALID_ARGUMENT if one of the input arguments is
     *                  invalid
     *                - MISSED_DEADLINE_* if the execution is aborted because it
     *                  cannot be completed by the deadline
     *                - RESOURCE_EXHAUSTED_* if the task was aborted by the
     *                  driver
     * @return outputShapes A list of shape information of model output operands.
     *                      The index into "outputShapes" corresponds to the index
     *                      of the output operand in the Request outputs vector.
     *                      outputShapes must be empty unless the status is either
     *                      NONE or OUTPUT_INSUFFICIENT_SIZE.
     * @return timing Duration of execution. Unless measure is YES and status is
     *                NONE, all times must be reported as UINT64_MAX. A driver may
     *                choose to report any time as UINT64_MAX, indicating that
     *                measurement is not available.
     */
    executeSynchronously_1_3(Request request, MeasureTiming measure,
                             OptionalTimePoint deadline,
                             OptionalTimeoutDuration loopTimeoutDuration)
                  generates (ErrorStatus status, vec<OutputShape> outputShapes,
                             Timing timing);

    /**
     * Launch a fenced asynchronous execution on a prepared model.
     *
     * The execution is performed asynchronously with respect to the caller.
     * executeFenced must verify the inputs to the function are correct, and the usages
     * of memory pools allocated by IDevice::allocate are valid. If there is an error,
     * executeFenced must immediately return with the corresponding ErrorStatus, an empty
     * handle for syncFence, and nullptr for callback. If the inputs to the function
     * are valid and there is no error, executeFenced must dispatch an asynchronous task
     * to perform the execution in the background, and immediately return with
     * ErrorStatus::NONE, a sync fence that will be signaled once the execution is completed,
     * and a callback that can be used by the client to query the duration and runtime error
     * status. If the task has finished before the call returns, an empty handle may be returned
     * for syncFence. The execution must wait for all the sync fences (if any) in waitFor
     * to be signaled before starting the actual execution.
     *
     * When the asynchronous task has finished its execution, it must
     * immediately signal the syncFence returned from the executeFenced call. After
     * the syncFence is signaled, the task must not modify the content of
     * any data object referenced by 'request' (described by the
     * {@link @1.0::DataLocation} of a {@link @1.0::RequestArgument}).
     *
     * executeFenced may be called with an optional deadline and an optional duration.
     * If the execution is not able to be completed before the provided deadline or
     * within the timeout duration (measured from when all sync fences in waitFor are
     * signaled), whichever comes earlier, the execution may be aborted, and either
     * {@link ErrorStatus::MISSED_DEADLINE_TRANSIENT} or {@link
     * ErrorStatus::MISSED_DEADLINE_PERSISTENT} may be returned. The error due
     * to an abort must be sent the same way as other errors, described above.
     *
     * If any of the sync fences in waitFor changes to error status after the executeFenced
     * call succeeds, or the execution is aborted because it cannot finish before the deadline
     * has been reached or the duration has elapsed, the driver must immediately set the returned
     * syncFence to error status.
     *
     * Any number of calls to the executeFenced, execute* and executeSynchronously*
     * functions, in any combination, may be made concurrently, even on the same
     * IPreparedModel object.
     *
     * @param request The input and output information on which the prepared
     *                model is to be executed. The outputs in the request must have
     *                fully specified dimensions.
     * @param waitFor A vector of sync fence file descriptors.
     *                Execution must not start until all sync fences have been signaled.
     * @param measure Specifies whether or not to measure duration of the execution.
     * @param deadline The time by which the execution is expected to complete.
     *                 If the execution cannot be finished by the deadline, the
     *                 execution may be aborted.
     * @param loopTimeoutDuration The maximum amount of time that should be spent
     *                            executing a {@link OperationType::WHILE}
     *                            operation. If a loop condition model does not
     *                            output false within this duration, the
     *                            execution must be aborted. If the model
     *                            contains a {@link OperationType::WHILE}
     *                            operation and no loop timeout duration is
     *                            provided, the maximum amount of time is {@link
     *                            LoopTimeoutDurationNs::DEFAULT}. When
     *                            provided, the duration must not exceed {@link
     *                            LoopTimeoutDurationNs::MAXIMUM}.
     * @param duration The length of time within which the execution is expected
     *                 to complete after all sync fences in waitFor are signaled.
     *                 If the execution cannot be finished within the duration,
     *                 the execution may be aborted.
     * @return status Error status of the call, must be:
     *                - NONE if task is successfully launched
     *                - DEVICE_UNAVAILABLE if driver is offline or busy
     *                - GENERAL_FAILURE if there is an unspecified error
     *                - INVALID_ARGUMENT if one of the input arguments is invalid, including
     *                                   fences in error states.
     *                - MISSED_DEADLINE_* if the execution is aborted because it
     *                  cannot be completed by the deadline
     *                - RESOURCE_EXHAUSTED_* if the task was aborted by the
     *                  driver
     * @return syncFence The sync fence that will be signaled when the task is completed.
     *                   The sync fence will be set to error if a critical error,
     *                   e.g. hardware failure or kernel panic, occurs when doing execution.
     * @return callback The IFencedExecutionCallback can be used to query information like duration
     *                  and error status when the execution is completed.
     */
    executeFenced(Request request, vec<handle> waitFor, MeasureTiming measure,
                  OptionalTimePoint deadline, OptionalTimeoutDuration loopTimeoutDuration,
                  OptionalTimeoutDuration duration)
        generates (ErrorStatus status, handle syncFence, IFencedExecutionCallback callback);
};