diff options
| -rw-r--r-- | vehicle/2.0/types.hal | 131 |
1 files changed, 103 insertions, 28 deletions
diff --git a/vehicle/2.0/types.hal b/vehicle/2.0/types.hal index adcc90ce36..cb551c186b 100644 --- a/vehicle/2.0/types.hal +++ b/vehicle/2.0/types.hal @@ -445,7 +445,7 @@ enum VehicleProperty: int32_t { * direction. * * @change_mode VehiclePropertyChangeMode:ON_CHANGE - * @access VehiclePropertyAccess:WRITE + * @access VehiclePropertyAccess:READ_WRITE */ HVAC_SEAT_TEMPERATURE = ( 0x050B @@ -453,6 +453,87 @@ enum VehicleProperty: int32_t { | VehiclePropertyType:INT32 | VehicleArea:SEAT), + /** + * Side Mirror Heat + * + * Increase values denote higher heating levels for side mirrors. + * 0 indicates heating is turned off. + * + * @change_mode VEHICLE_PROP_CHANGE_MODE_ON_CHANGE + * @access VEHICLE_PROP_ACCESS_READ_WRITE + */ + HVAC_SIDE_MIRROR_HEAT = ( + 0x050C + | VehiclePropertyGroup:SYSTEM + | VehiclePropertyType:INT32 + | VehicleArea:MIRROR), + + /** + * Steering Wheel Temperature + * + * Sets the temperature for the steering wheel + * Positive value indicates heating. + * Negative value indicates cooling. + * 0 indicates temperature control is off. + * + * @change_mode VEHICLE_PROP_CHANGE_MODE_ON_CHANGE + * @access VEHICLE_PROP_ACCESS_READ_WRITE + */ + HVAC_STEERING_WHEEL_TEMP = ( + 0x050D + | VehiclePropertyGroup:SYSTEM + | VehiclePropertyType:INT32 + | VehicleArea:GLOBAL), + + /** + * Temperature units + * + * Indicates whether the temperature is in Celsius, Fahrenheit, or a + * different unit from VehicleUnit enum. + * This parameter affects all HVAC temperatures in the system. + * + * @change_mode VEHICLE_PROP_CHANGE_MODE_ON_CHANGE + * @access VEHICLE_PROP_ACCESS_READ + */ + HVAC_TEMPERATURE_UNITS = ( + 0x050E + | VehiclePropertyGroup:SYSTEM + | VehiclePropertyType:INT32 + | VehicleArea:ZONE), + + /** + * Actual fan speed + * + * @change_mode VEHICLE_PROP_CHANGE_MODE_ON_CHANGE + * @access VEHICLE_PROP_ACCESS_READ + * @allow_out_of_range_value : OFF + */ + HVAC_ACTUAL_FAN_SPEED_RPM = ( + 0x050F + | VehiclePropertyGroup:SYSTEM + | VehiclePropertyType:INT32 + | VehicleArea:ZONE), + + /** + * Fan Positions Available + * + * This is a bit mask of fan positions available for the zone. Each entry in + * vehicle_hvac_fan_direction is selected by bit position. For instance, if + * only the FAN_DIRECTION_FACE (0x1) and FAN_DIRECTION_DEFROST (0x4) are available, + * then this value shall be set to 0x12. + * + * 0x12 = (1 << 1) | (1 << 4) + * + * @change_mode VEHICLE_PROP_CHANGE_MODE_STATIC + * @access VEHICLE_PROP_ACCESS_READ + * @allow_out_of_range_value : OFF + */ + HVAC_FAN_DIRECTION_AVAILABLE = ( + 0x0511 + | VehiclePropertyGroup:SYSTEM + | VehiclePropertyType:INT32 + | VehicleArea:ZONE), + /* * Represents power state for HVAC. Some HVAC properties must require * matching power to be turned on to get out of OFF state. For non-zoned @@ -516,7 +597,7 @@ enum VehicleProperty: int32_t { * @config_flags Number of presets supported */ RADIO_PRESET = ( - 0x801 + 0x0801 | VehiclePropertyGroup:SYSTEM | VehiclePropertyType:INT32_VEC | VehicleArea:GLOBAL), @@ -1018,20 +1099,6 @@ enum VehicleProperty: int32_t { | VehicleArea:GLOBAL), /* - * Mirror Heat - * - * Increase values denote higher heating levels. - * - * @change_mode VehiclePropertyChangeMode:ON_CHANGE - * @access VehiclePropertyAccess:READ_WRITE - */ - MIRROR_HEAT = ( - 0x0B45 - | VehiclePropertyGroup:SYSTEM - | VehiclePropertyType:INT32 - | VehicleArea:GLOBAL), - - /* * Mirror Fold * * True indicates mirrors are folded @@ -1040,7 +1107,7 @@ enum VehicleProperty: int32_t { * @access VehiclePropertyAccess:READ_WRITE */ MIRROR_FOLD = ( - 0x0B46 + 0x0B45 | VehiclePropertyGroup:SYSTEM | VehiclePropertyType:BOOLEAN | VehicleArea:GLOBAL), @@ -1383,7 +1450,7 @@ enum VehicleProperty: int32_t { | VehicleArea:GLOBAL), /* - * Headrest heigh move + * Headrest height move * * Moves the headrest up and down. * @@ -1427,6 +1494,11 @@ enum VehicleProperty: int32_t { | VehicleArea:SEAT), /* + * Headrest fore/aft position + * + * Adjusts the headrest forwards and backwards. + * Max value indicates position closest to front of car. + * Min value indicates position closest to rear of car. * * @change_mode VehiclePropertyChangeMode:ON_CHANGE * @access VehiclePropertyAccess:READ_WRITE @@ -1438,6 +1510,7 @@ enum VehicleProperty: int32_t { | VehicleArea:SEAT), /* + * Headrest fore/aft move * * @change_mode VehiclePropertyChangeMode:ON_CHANGE * @access VehiclePropertyAccess:READ_WRITE @@ -1991,7 +2064,9 @@ enum VehicleUnit : int32_t { MILLIMETER = 0x20, METER = 0x21, KILOMETER = 0x23, - CELCIUS = 0x30, + CELSIUS = 0x30, + FAHRENHEIT = 0x31, + KELVIN = 0x32, MILLILITER = 0x40, NANO_SECS = 0x50, SECS = 0x53, @@ -2140,15 +2215,15 @@ enum VehicleAreaZone : int32_t { * Various Seats in the car. */ enum VehicleAreaSeat : int32_t { - ROW_1_PASSENGER_LEFT = 0x0001, - ROW_1_PASSENGER_CENTER = 0x0002, - ROW_1_PASSENGER_RIGHT = 0x0004, - ROW_2_PASSENGER_LEFT = 0x0010, - ROW_2_PASSENGER_CENTER = 0x0020, - ROW_2_PASSENGER_RIGHT = 0x0040, - ROW_3_PASSENGER_LEFT = 0x0100, - ROW_3_PASSENGER_CENTER = 0x0200, - ROW_3_PASSENGER_RIGHT = 0x0400, + ROW_1_LEFT = 0x0001, + ROW_1_CENTER = 0x0002, + ROW_1_RIGHT = 0x0004, + ROW_2_LEFT = 0x0010, + ROW_2_CENTER = 0x0020, + ROW_2_RIGHT = 0x0040, + ROW_3_LEFT = 0x0100, + ROW_3_CENTER = 0x0200, + ROW_3_RIGHT = 0x0400 }; /* |